FACTORS AFFECTING QUALITY OF FRESH PRODUCE - Presented By Mustafa Atas
Recently I am working a project called “Factors Affecting Quality of Fresh Produce” and prepared presentation.
Management of Post-Harvest Losses in Fruits and VegetablesSaurav Tuteja
Fruits and vegetables are the most perishable agricultural produce and the post-harvest loss of these is tremendous. Producers have to suffer a huge economic loss due to lack of proper understanding about causes, nature of loss, proper preservation methods, their transportation, and marketing techniques. This paper suggests the methods of handling the fruits and vegetables after their harvest so as to reduce the loss to the minimum and obtain maximum returns from them.
Fresh fruits and vegetables are perishable and highly prone to these losses because they are composed of living tissues. These tissues must be kept alive and healthy throughout the process of marketing. These are composed of thousands of living cells which require care and maintenance.
Post harvest handling and transportationDebomitra Dey
Handling and transporation of postharvest produce like fruits and vegetables from farm to industry. The necessary measures to be taken while transportation and handling of fresh produce for longer stability of produce.
the presentation is a brief information on the different post harvest practices practiced commonly in lndia and the presentation is generalized to the context of the world
Canning Equipments: Construction & WorkingAbdul Rehman
Comprises of detailed theory alongwith labelled diagram of equipments used in Canning of Fruits and Vegetables. The flow chart which illustrates numerous process carried out in Canning Fruits and Vegetables.
Management of Post-Harvest Losses in Fruits and VegetablesSaurav Tuteja
Fruits and vegetables are the most perishable agricultural produce and the post-harvest loss of these is tremendous. Producers have to suffer a huge economic loss due to lack of proper understanding about causes, nature of loss, proper preservation methods, their transportation, and marketing techniques. This paper suggests the methods of handling the fruits and vegetables after their harvest so as to reduce the loss to the minimum and obtain maximum returns from them.
Fresh fruits and vegetables are perishable and highly prone to these losses because they are composed of living tissues. These tissues must be kept alive and healthy throughout the process of marketing. These are composed of thousands of living cells which require care and maintenance.
Post harvest handling and transportationDebomitra Dey
Handling and transporation of postharvest produce like fruits and vegetables from farm to industry. The necessary measures to be taken while transportation and handling of fresh produce for longer stability of produce.
the presentation is a brief information on the different post harvest practices practiced commonly in lndia and the presentation is generalized to the context of the world
Canning Equipments: Construction & WorkingAbdul Rehman
Comprises of detailed theory alongwith labelled diagram of equipments used in Canning of Fruits and Vegetables. The flow chart which illustrates numerous process carried out in Canning Fruits and Vegetables.
Jam means the product prepared from sound, ripe, fresh, dehydrated, frozen or previously packed fruits including fruit juices, fruit pulp, fruit juice concentrate or dry fruit by boiling its pieces or pulp or puree with nutritive value
Fruit Jelly means the product prepared by boiling fruit juice or fruit(s) of sound quality, with or without water, expressing and straining the juice, adding nutritive sweeteners, and concentrating to such a consistency that gelatinization takes place on cooling. The product shall not be syrupy, sticky or gummy and shall be clear, sparkling and transparent.
Marmallade
This is a citrus fruit product prepared by cooking fruit pulp or extract with sufficient amount of sugar and using shreds of peel as suspended material.
Marmalades are classified into :
1. Jelly marmalade
2. Jam marmalade
Preserves
A mature fruit/ vegetable or its piece impregnated with heavy sugar syrup till it becomes tender and transparent is known as preserve. When fruits are placed in a concentrated sugar syrup, the water moves out of the fruit and sugar moves into it until equilibrium is reached by osmosis. Apple, Cherry, anola, pineapple, pear, mango, papaya, strawberry, etc., can be used for making preserves. FPO specifications for preserves are given in Quality section
Candies Vegetable & fruits
A fruit or vegetable impregnated with cane sugar or glucose syrup, and subsequently drained free of syrup and dried, is known as candied fruit/vegetable. The most suitable fruits for candying are pineapple, cherry, aonla, karonda, papaya, apple, peach, peels of orange, ginger etc.
Introduction
Principle of canning
Foods that are canned
Canning processing
Spoilage of canned products
Containers for packing of canned products
Equipments used in canning process
We take pride in introducing over selves as the leading manufacturer & supplier of fruits/vegetables sorting-grading plants and other allied equipments. AGROSAW specializes in the design and the manufacture of sorting, washing, waxing, drying and grading systems for fresh fruit and vegetables. We have complete range of machineries for any type of fruits and vegetables.
However we want to ensure that we guarantee the quality of the equipment and you will definitely get good brand image. We believe that if this cooperation become successful than we will have more opportunities for mutual cooperation.
We are the most trusted supplier for the prestigious companies engaged in Agribusiness and value addition of the product. The AGROSAWTM name today is synonym to quality equipments and latest technology.
The different categories of manufacturing include:
1. Sorting- Washing- Waxing- Drying- Grading of Round Fruits & Vegetables like Oranges, Kinnows, Sweetlime, Tomato, Lemon, Amla etc.
2. Sorting & Grading of Potato, Onion and Garlic.
3. Sorting- Washing- Waxing- Drying- Weight Grading of Mango and other similar fruits like Capsicum etc.
4. Length grading of Carrots, Cucumbers, Radish etc.
5. Manual Sorting-Grading line for oblong shaped vegetables like Ginger, Ladies finger etc.
6. Semi Automatic Net Clipping Machine.
7. Shrink Wrapping Machine.
8. Vacuum Packaging Machine.
9. Onion Topper
10. Baggers.
Canning of horticultural products like Fruits & vegetables, process of Canning, and the factors that affects Canning process and the effect of microorganisms and chemicals in the canned products.
Fruits play a vital role in human nutrition as well as generate high income to the growers. Pre-harvest and post-harvest factors have a great effect on the postharvest quality of fruits. The combination of these factors includes genetic, environmental, cultural practices, irrigation, packaging, pre-cooling, storage, transportations, etc. In this paper, we provide a review of studies on how pre-harvest and post-harvest factors influence the post quality of fruits. The influence of pre-harvest and post-harvest factors can be controlled by various cultural practices, use of certain chemicals and high tech recent management practices.
Postharvest Handling for Organic Crops ~ California
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children
http://scribd.com/doc/239851214
`
Double Food Production from your School Garden with Organic Tech
http://scribd.com/doc/239851079
`
Free School Gardening Art Posters
http://scribd.com/doc/239851159`
`
Increase Food Production with Companion Planting in your School Garden
http://scribd.com/doc/239851159
`
Healthy Foods Dramatically Improves Student Academic Success
http://scribd.com/doc/239851348
`
City Chickens for your Organic School Garden
http://scribd.com/doc/239850440
`
Simple Square Foot Gardening for Schools - Teacher Guide
http://scribd.com/doc/239851110
Jam means the product prepared from sound, ripe, fresh, dehydrated, frozen or previously packed fruits including fruit juices, fruit pulp, fruit juice concentrate or dry fruit by boiling its pieces or pulp or puree with nutritive value
Fruit Jelly means the product prepared by boiling fruit juice or fruit(s) of sound quality, with or without water, expressing and straining the juice, adding nutritive sweeteners, and concentrating to such a consistency that gelatinization takes place on cooling. The product shall not be syrupy, sticky or gummy and shall be clear, sparkling and transparent.
Marmallade
This is a citrus fruit product prepared by cooking fruit pulp or extract with sufficient amount of sugar and using shreds of peel as suspended material.
Marmalades are classified into :
1. Jelly marmalade
2. Jam marmalade
Preserves
A mature fruit/ vegetable or its piece impregnated with heavy sugar syrup till it becomes tender and transparent is known as preserve. When fruits are placed in a concentrated sugar syrup, the water moves out of the fruit and sugar moves into it until equilibrium is reached by osmosis. Apple, Cherry, anola, pineapple, pear, mango, papaya, strawberry, etc., can be used for making preserves. FPO specifications for preserves are given in Quality section
Candies Vegetable & fruits
A fruit or vegetable impregnated with cane sugar or glucose syrup, and subsequently drained free of syrup and dried, is known as candied fruit/vegetable. The most suitable fruits for candying are pineapple, cherry, aonla, karonda, papaya, apple, peach, peels of orange, ginger etc.
Introduction
Principle of canning
Foods that are canned
Canning processing
Spoilage of canned products
Containers for packing of canned products
Equipments used in canning process
We take pride in introducing over selves as the leading manufacturer & supplier of fruits/vegetables sorting-grading plants and other allied equipments. AGROSAW specializes in the design and the manufacture of sorting, washing, waxing, drying and grading systems for fresh fruit and vegetables. We have complete range of machineries for any type of fruits and vegetables.
However we want to ensure that we guarantee the quality of the equipment and you will definitely get good brand image. We believe that if this cooperation become successful than we will have more opportunities for mutual cooperation.
We are the most trusted supplier for the prestigious companies engaged in Agribusiness and value addition of the product. The AGROSAWTM name today is synonym to quality equipments and latest technology.
The different categories of manufacturing include:
1. Sorting- Washing- Waxing- Drying- Grading of Round Fruits & Vegetables like Oranges, Kinnows, Sweetlime, Tomato, Lemon, Amla etc.
2. Sorting & Grading of Potato, Onion and Garlic.
3. Sorting- Washing- Waxing- Drying- Weight Grading of Mango and other similar fruits like Capsicum etc.
4. Length grading of Carrots, Cucumbers, Radish etc.
5. Manual Sorting-Grading line for oblong shaped vegetables like Ginger, Ladies finger etc.
6. Semi Automatic Net Clipping Machine.
7. Shrink Wrapping Machine.
8. Vacuum Packaging Machine.
9. Onion Topper
10. Baggers.
Canning of horticultural products like Fruits & vegetables, process of Canning, and the factors that affects Canning process and the effect of microorganisms and chemicals in the canned products.
Fruits play a vital role in human nutrition as well as generate high income to the growers. Pre-harvest and post-harvest factors have a great effect on the postharvest quality of fruits. The combination of these factors includes genetic, environmental, cultural practices, irrigation, packaging, pre-cooling, storage, transportations, etc. In this paper, we provide a review of studies on how pre-harvest and post-harvest factors influence the post quality of fruits. The influence of pre-harvest and post-harvest factors can be controlled by various cultural practices, use of certain chemicals and high tech recent management practices.
Postharvest Handling for Organic Crops ~ California
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children
http://scribd.com/doc/239851214
`
Double Food Production from your School Garden with Organic Tech
http://scribd.com/doc/239851079
`
Free School Gardening Art Posters
http://scribd.com/doc/239851159`
`
Increase Food Production with Companion Planting in your School Garden
http://scribd.com/doc/239851159
`
Healthy Foods Dramatically Improves Student Academic Success
http://scribd.com/doc/239851348
`
City Chickens for your Organic School Garden
http://scribd.com/doc/239850440
`
Simple Square Foot Gardening for Schools - Teacher Guide
http://scribd.com/doc/239851110
Post Harvest Handling & Cold Chain Management Of Fresh Commodities.pptxTanyaThakur56
Fruits harvested too early may lack flavor and may not ripen properly, while produce harvested too late may be fibrous or have very limited market life.
The level of maturity actually helps in the selection of storage methods, estimation of shelf life, selection of processing operations for value addition, etc. Maturity has been divided into two categories i.e, physiological maturity and horticultural maturity.
Post-harvest handling includes the processes done immediately after harvesting that includes cleaning, sorting, packing, cooling, etc.
Canning has been a preservation process since ages. This presentation gives a brief description about the process and some of the problems related to it.
Key Features of The Italian Restaurants.pdfmenafilo317
Filomena, a renowned Italian restaurant, is renowned for its authentic cuisine, warm environment, and exceptional service. Recognized for its homemade pasta, traditional dishes, and extensive wine selection, we provide a true taste of Italy. Its commitment to quality ingredients and classic recipes has made it a adored dining destination for Italian food enthusiasts.
At Taste Of Middle East, we believe that food is not just about satisfying hunger, it's about experiencing different cultures and traditions. Our restaurant concept is based on selecting famous dishes from Iran, Turkey, Afghanistan, and other Arabic countries to give our customers an authentic taste of the Middle East
Piccola Cucina is regarded as the best restaurant in Brooklyn and as the best Italian restaurant in NYC. We offer authentic Italian cuisine with a Sicilian touch that elevates the entire fine dining experience. We’re the first result when someone searches for where to eat in Brooklyn or the best restaurant near me.
Ang Chong Yi Navigating Singaporean Flavors: A Journey from Cultural Heritage...Ang Chong Yi
In the heart of Singapore, where tradition meets modernity, He embarks on a culinary adventure that transcends borders. His mission? Ang Chong Yi Exploring the Cultural Heritage and Identity in Singaporean Cuisine. To explore the rich tapestry of flavours that define Singaporean cuisine while embracing innovative plant-based approaches. Join us as we follow his footsteps through bustling markets, hidden hawker stalls, and vibrant street corners.
Roti Bank Hyderabad: A Beacon of Hope and NourishmentRoti Bank
One of the top cities of India, Hyderabad is the capital of Telangana and home to some of the biggest companies. But the other aspect of the city is a huge chunk of population that is even deprived of the food and shelter. There are many people in Hyderabad that are not having access to
2. Agenda
Factors Affecting Quality and Safety
of Fresh Produce
The factors affecting quality of fresh produce are divided
into groups and they are pre-harvest, postharvest or during
processing.
Pre-harvest Factors influencing quality and
safety aspects
Postharvest Factors influencing quality and
safety aspects
Processing Factors influencing quality and safety
aspects.
3. Pre-harvest Factors Influencing
Quality and Safety Aspects
Cultivar Type
Soil Condition
Climatic Conditions and Irrigation
Farming system (Conventional or Organic)
Fertilisation
Pest Control Method
Pruning
4. Postharvest Factors Influencing Quality Aspects
Maturity stage
Methods of harvesting
Tools for harvesting and assembling
Time of harvesting
Precooling
Sorting and grading
Packing, packing materials, and palletisation
Use of cushioning materials in package (foam net, paper cutting, rice straw and
buble etc.)
Storage
Type of storage
Temperature during storage and transportation
Temperature and Relative Humidity (RH)
Transportation
Road condition
Pattern of loading and unloading
Exposure to packed and unpacked boxes to sunlight
5. Maturity Stage:
This is the starting point of postharvest quality management.
Therefore, it must be ensured that properly matured fruits should be
harvested. Immature or over matured fruits are inferior in quality and
soil more quickly even if other factors are favourable. The maturity of
harvested fruits has an important role on shelf life, quality, and market
price.
There are mainly three stages in the life span of fruits and
vegetable:
1) Maturation: it is indicative of the fruit being ready for harvest. At this
point, the edible part of the fruit or vegetable is fully developed in size,
although it may not be ready for immediate consumption.
2) Ripening: Ripening follows or overlaps maturation, rendering the
produce edible, as indicated by texture, taste, color, and flavour.
3)Senescence: it is last stage, characterised by natural degradation of the
fruit or vegetable, as in loss of texture, flavour, etc. (Senescence ends with
the death of the tissue of the fruits).
Maturity quality index for fresh produce are skin color/peel color,
shape, size, aroma (flavour), leaf/flower/inflorescence conditions
changes, firmness (flesh firmness), juice content, sugars, starch
content, brix:acid ratio and specific gravity.
7. Methods of Harvesting:
Harvesting individual fruits/vegetables with hand by
pulling or twisting the fruit pedicel.
Harvesting individual fruits or fruit bunch/vegetable
or vegetable bunch with the help of fruit
clippers/secateurs/scissors
Mechanical harvesting
8. Tools for Harvesting and Assembling:
Postharvest quality also depends on the tools used for
harvesting fresh produce as faulty tools can affect
quality. Depending on the type of fruits or vegetables,
several tools are used for harvesting. Commonly used
tools for harvesting of fruit and vegetable are
secateurs, scissors, fruit clippers, knives, and hand-
held or ole-mounted picking shears.
9. Time of Harvesting:
Harvesting time also affects quality. Fruits harvested
before 10AM in the morning and transported to pack
house for sorting, grading, and packing yield better
quality and last longer.
10. Precooling :
The quality of fresh fruits and vegetables largely depends on
precooling before storage and marketing. This is a
compulsory postharvest treatment followed in developed
countries for almost all perishable commodities. It is an
important postharvest operation recommended in almost all
flowers, fruits, and few vegetables. The main objective of any
precooling operation is to remove field temperature (field
heat). Removing field heat reduces rate of respiration and all
biochemical reactions from newly harvested produce.
Respiration can cause deterioration, including loss of
nutritional value, changes in texture and flavour, and loss of
weight in fresh produce . These processes cannot be
stopped, but they can be slowed down significantly by
precooling before storage or distribution.
Generally, the higher the respiration rate of a fruit or
vegetable, the greater the need for postharvest
precooling.
11. Precooling :
Four basic methods of precooling can be
applied based on the texture and scale
value of the product
Forced air: Forced air cooling is the most common and widely used method of
precooling. In this method, cool air with high seed moves over a product to
remove the field heat. Both packed and unpacked fruits and vegetables can be
precooled.
Hydro cooling: Hydro cooling cools produce with chilled water. However,
packed fruits are difficult to cool by this method. The water usually is cooled by
mechanical refrigeration, although cold well water and ice sometimes are used.
In this method, manufacturer or producers must pay more attention to water
quality. Unfiltered and un-sanitized water can spread undesirable
microorganism.
Vacuum cooling: This method of precooling is based on the principle of
“water evaporates at very low temperature if pressure reduced and maintained
to a desired level’’. Vacuum cooling is one of the more rapid cooling systems
and cooling is accomplished at very low pressures.
Icing: Crushed or slurry ice is placed directly into the produce box. This can be
an effective way of precooling individual boxes of certain vegetables.
12. Sorting and grading:
Sorting and grading are either done in the farmer’s field
or in pack houses. Proper sorting and grading gives
assurance of quality produce. Both manual and
mechanical graders are used for grading. All round-
shaped fruits and vegetables are easily graded by
mechanical graders. Grading may be based on color,
size, and extent of defects, while sorting is totally
dependent on manpower for removal of defected and
damaged fruits or vegetables.
13. Packing, Packing Materials, and Palletisation:
Both packing and packing materials play many
important roles in quality maintenance of fresh
produce. Packing starts with placing the produce in
the box. While placing, care must be taken to place
in line, pedicel end of all fruits should be in one
direction, separation layers or trays must be used
where it is necessary. The box should not be under
or overfilled. This results in heavy touching marks
and bruising during handling or transportation.
14. Use of cushioning materials in package:
(foam net, paper cutting, leaves, rice straw and bubble sheet etc.):
Cushioning materials are used in many stages during postharvest
handling operations. There are three main stages, where it becomes
compulsory in order to maintain postharvest quality.
The first stage is putting harvested produce into plastic crates or any
rigid container.
The second stage is transportation from field to pack house. Based on
the condition of roads, there would be impact and vibration bruising;
these bruising may not be visible immediately, but after few days,
browning or blackening symptoms develop and finally produce starts
rotting. Cushioning materials if used in plastic crates reduce these
bruising and touching marks drastically.
The third stage is transportation of packed produce from pack house
to destination markets.
Loading, unloading, and transportation jerk causes bruising. Therefore, it
is recommended to use cushioning material to preserve post-harvest
quality of fresh produce.
15. Storage:
The management of temperature, ventilation, and relative
humidity (RH) are the three most important factors that
affect postharvest quality and product shelf life.
16. Storage:
There may be many objectives of storage but main objectives
are:
To minimize glut and distress sale in the market, thus assuring good price to
the farmers.
To insure availability of food in off-season
To save horticultural produce from being soiled
Storage in season when cost of produce is relatively low and marketing in off-
season at better price. This gives higher returns to growers and traders.
To regulate the price of the commodity during season and also in off-season
Most apple, pear, grapes, potato, onion, and chilli are stored in large quantities
to feed the market round the year.
Lowering the temperature to the lowest safe level is of paramount importance for
enhancing the shelf life, reducing the losses, and maintaining fresh quality of
fresh produce. For example, mango needs a temperature above 8 0C, banana above
12 0C, apple 1-2 0C, etc.
17. Storage:
Important Tips for Storage of Fresh Produce
Store only high-quality produce, free of damage, decay, and of proper
maturity (not overripe or under mature)
Know the requirements for the commodities you want to put into storage,
and follow recommendations for proper temperature, relative humidity, and
ventilation. Never store carrot with apple or any fruit that releases ethylene
gas because carrot is very sensitive to ethylene and develops bitterness due
to formation of a compound called Iso-coumarin.
Avoid lower than recommended temperatures in storage, because many
commodities are susceptible to low temperature injury called freezing or
chilling.
Do not overload storage rooms or stack boxes tightly; it will hinder air
movement through all boxes. Air follows the same path or easiest path if not
blocked.
Boxes should be stored on perforated wooden racks specially designed for
air movement.
Provide adequate ventilation in the storage room by keeping little space
between two stack lines. Boxes should not be stored on the passage kept for
the movement of staff and labours
Storage rooms should be protected from rodents by keeping the immediate
outdoors area clean and free from trash and weeds.
18. Storage:
Important Tips for Storage of Fresh Produce
Containers / Boxes must be well-ventilated and strong enough to withstand
stacking. Do not stack boxes beyond their stacking strength.
Monitor temperature in the storage room by placing thermometers at
different locations.
Do not store onion and garlic in high humidity environments.
Control insect/pest/rodents population inside the store.
Check your produce at regular intervals for any sign of damage due to
insect/pest, water loss, ripening, shrivelling, etc.
Remove damaged or diseased produce to prevent the spread of pathogens.
Always handle produce gently and never store produce unless it is of the
best quality.
Damaged produce will lose water faster and have higher decay rates in
storage as compared to undamaged produce and must be removed.
19. Storage:
A strategy widely practised is to set cold chambers at an average
of round 2-5 0C and 90-95%relative humidity, irrespective of
specific requirement. Frequent opening and closing of cold store
chamber for product loading and unloading causes an increase
in temperature and decrease in relative humidity.
Scientist recommends three combinations of
temperature and relative humidity
0-2 0C and 90-98% RH for leafy vegetables, crucifers,
temperate fruits, and berries
7-10 0C and 85-95% RH for citrus, subtropical fruits, and fruit
vegetables.
13-18 0C and 85-95% RH for tropical fruits, melons, pumpkins,
and root vegetables.
20. Storage:
Storage of compatible groups of fruits and vegetables together (requires same
temperature and RH) is advisable and necessary. Otherwise, quality of one
produce affects the quality of other produce. Some fruits or vegetables can be
stored together due to their common temperature and relative humidity.
Compatibility groups of fruits and vegetables that can be stored together
Group Temperatures and
RH
Crops Status of
commodities
Group 1 0 – 2 0C and
90-95% RH
Apple, Apricot, Asian
Pear, Grapes, Litchis,
Plum, Prunes,
Pomegranates,
Mushroom, Turnip, Peach
Produce Ethylene
Group 2 0 – 2 0C and
90-95% RH
Asparagus, Leafy greens,
Broccoli, Peas, Spinach,
Cabbage, Carrot,
Cauliflower, Cherries
Sensitive to Ethylene
Group 3 0 – 2 0C and
65-70% RH
Garlic, Onions dry Moisture will
damage these crops
21. Storage:
Temperature and Relative Humidity (RH)
Keeping fruits and vegetables within optimum temperature range and
relative humidity is the most important factor in maintaining their quality and
minimising postharvest losses. Fruit, vegetables and flowers are alive after
harvest; all physiological processes continue after harvest such as
respiration and water losses. Respiration results in produce deterioration,
including loss of nutritional value, changes in texture and flavour, and loss of
weight by transpiration.
These process cannot be stopped, however they can be reduced
significantly by careful management of temperature and relative humidity
during storage and transportation.
As a thumb rule, lower the temperature, the slower will be its respiration rate
and the growth of decay organisms.
Water is the main component found in fruits and vegetables. An important
factor in maintaining postharvest quality is to ensure that there is adequate
relative humidity inside the storage area. Water loss or dehydration means a
loss in weight, which in turn affects crispiness and firmness. For most fresh
produce, relative humidity of about 90-95% is recommended for storage and
transportation.
22. Transportation and transport vehicle:
Transportation may be a connecting link between
producer and consumers. It holds key factor in
postharvest quality maintenance of all fresh produce.
After harvest, a number of vehicles (trucks, tractors,
trains, boats, ships, utility vehicles, etc.) are used to
transport the product from field to either packing
houses, wholesale or retail markets. These vehicles
are not equipped with refrigeration unit and thus the
produce decays faster, compared to that in refrigerated
vehicles.
23. Road condition and duration of transportation:
Both road condition and duration of transportation
affect quality of fresh produce. In hilly tracks and rough
road surface, more touching and bruising take place as
compared to smooth surface. Longer duration during
transportation also affects quality.
24. Pattern of loading and unloading:
Generally, fruits and vegetables are stacked on pallets to
ease the loading and unloading process and to prevent
damage to the product and packages.
25. Exposure of packed and unpacked boxes to sunlight:
Exposure to sun while awaiting loading at local mandis
or transport can reduce quality drastically. The exposed
portion turns black or brown and starts decaying. It is
advised for non-reefer transport to move continuously
while under sunlight and stop and park your vehicle
under a tree shade, especially during sunny days.
26. Processing Factors Influence Quality
and Safety Aspects
Consumers demand fresh-cut products due to convenience and
healthy food.
Processing (cutting, shredding, washing, contaminated work
surfaces/equipment etc.)
Hygiene practices of workers (Training required operators)
Packaging (contaminated packaging materials/equipments)
Transportation and distribution (Temperature, relative humidity,
and cleanliness etc.)
During production manufactures face so many food safety hazards
and they are classified in three groups.
27. Processing Factors Influence Quality and Safety Aspects
Food safety hazards are:
Biological hazards
Physically hazards
Chemical hazards
Examples of process fruits
28. Food safety hazards:
a) Biological (includes bacteria or their toxins, viruses, moulds and
tapeworms that can cause food borne illness) and the common biological
hazards are usually microbiological.
The contamination of ready-to-eat food by sufficient numbers of
pathogens can cause illness,
the multiplication of micro-organisms
The survival of micro-organisms, for example, as a result of
undercooking.
Product pH strongly influences the survival and growth of pathogens.
Most vegetables have a pH of ≥5.0, and consequently support the
growth of most foodborne bacteria.
Many fruits have acidic pH; however, a number of soft fruits/melons
have pH values ≥5.0 and will support growth of many pathogens.
Washing in water removes soil and other debris, some of the surface
microflora, and cell contents and nutrients released during slicing that
help support the growth of microorganisms. However, re-use of wash
water in industry, washing can result in cross-contamination of
product rather than decontamination.
29. Food safety hazards:
Microbiological Hazards (Example Micro-organisms)
Listeria monocytogenes
Escherichia coli VTEC
Campylobacter jejuni
Clostridium botulinum
Clostridium perfringens
Staphylococcus aureus
Salmonella choleraesuis
Salmonella parathyphi A,B and C
Shigella dysenteriae
Sources of Pathogen Bacteria: human and animal waste, fertilisers,
dry or slurries, liquids used untreated for irrigation and faecal
contamination of processing in water.
30. Food safety hazards:
b) Chemical hazards
Raw materials
Heavy metal
Pesticide/insecticide
residues
Antibiotic residues
Toxin
Histamine
(related to fish)
In the Process
Refrigerant (strong
smell &toxin)
Lubricant (grease &
oil)
Pest control agent
Sanitising agent
Paint
Water additive
From Packing
Materials
Plasticisers
Printing code inks
Adhesives
Lubricant
31. Food safety hazards:
c) Physical Hazards and Control Measures (Detection &
Removals)Physical Hazards
Insect infestation
Glass
Metal
Plastic
Wood
Paper
Control Measures (Detection &
Removals)
Sieves and filters
Metal detection
Magnetic Grids or
Permanent Magnets
Colour sorting
Vision system
Human inspection and
sorting
X-ray system
32. Process Plan Fruit Salads
1) Products arrives in
temperature
Controlled in take
1 A. Packaging arrives on intake
and packaging checks are
completed
2) Arrival checks completed in
intake area
3) Quality checks completed
4)Transfer to appropriate
storage
5 A. Packaging removed from
designated storage
5) Transfer into production
outside preparation chamber
6 A. Packaging loaded on to
process equipment
6)Product fed by automated
belt into preparation area
7)Cutting by hand or
automated machine
7 A. Waste
8)Product fed through
automated packing machine
9) Product passes through the
metal detector (CCP)
10) Packed product fed to the
main production area, label
applied
11)Finished product packed
into cases
12)Finished cases transferred
into wooden pallet
13) Finished product
transferred into temperature
controlled despatch
13 A waste transferred into
designated area
14) Final quality check
15) Finished product loaded on
to temperature controlled
vehicle and despatched
33. Hazard Analysis Chart
Process
Step
Hazard & Sources/Causes Likely
Occurren
ce
(High/Me
dium/Low
)
Advers
e
Health
Effects
(H/M/L
)
Control Measures
1)Product
arrives in
temperatur
e
controlled
goods in
area
Physical Hazards
- External contamination from rain water,
bird droppings, vermin/rodents and flying
insects during in loading process.
- Glass contamination from internal light
sources.
- Pest/rodents and or flying insect due to
poor hygiene/debris build up
- Physical risk from
straps/thermocouples/staples/foreign
bodies found on pallet on intake
Chemical Hazards
Chemical contamination during process at the
source of origin
Microbiological Hazards
Microbiological contamination during process
at the source of origin
Low
Low
Low
Mediu
m
Mediu
m
Mediu
- Curtains/cushions fitted to all loading bays to
prevent external contamination.
- Prerequisite programmes in place to control all
named hazards, include; Daily GMP, and
glass&hard plastic breakage audit.
- External and internal pest control programmes.
EFKs in lace in take areas.
- All lights fittings covered
- Supplier Q.A.S system and HACCP in place and
verified/audited by the Technical Department to
eliminate/reduce potential foreign body or
microbiological contamination.
- Intake inspections to identify foreign body
contamination on arrival
- Chemical /pesticide used at source in
conjunction with E.E.C/Local regulations
- Supplier Q.A.S system in place and regularly
audited: validation by way of chemical MRL
testing programme, records retained.
- Supplier Q.A.S system and HACCP in place and
verified/audited by the Technical Department to
eliminate/reduce potential foreign body or
microbiological contamination.
34. Control Measures
Food manufacturers face so many issues and problems to produce safe and
best quality product with long shelf life etc. How do they manage or control?
Certification of the supplier
Specification of the buyer
Maintenance of the appropriate temperature
Maintenance of refrigeration
Training programmes for operators
Control of time and temperature
Production programme
GMP is always essential
General sanitation of plant
Disinfection and maintenance of equipment
Calibration of balances
Certification of potable water
In conclusion, following HACCP procedures in food manufacturing correctly can
help solve all food safety issues and improve quality.
35. References:
Seljåsen, R. et al. Quality of carrots as affected by pre- and
postharvest factors and processing. Journal of the Science of
Food and Agriculture 93, 2611–2626 (2013).
Francis, G. A. et al. Factors Affecting Quality and Safety of Fresh-
Cut Produce. Critical Reviews in Food Science and
Nutrition 52, 595–610 (2012).
Figure 2f from: Irimia R, Gottschling M (2016) Taxonomic
revision of Rochefortia Sw. (Ehretiaceae, Boraginales).
Biodiversity Data Journal 4: e7720.
https://doi.org/10.3897/BDJ.4.e7720
Arah, I. K., Amaglo, H., Kumah, E. K. & Ofori, H. Preharvest and
Postharvest Factors Affecting the Quality and Shelf Life of
Harvested Tomatoes: A Mini Review. International Journal of
Agronomy 2015, 1–6 (2015).
Tudela, J. A., Marín, A., Martínez-Sánchez, A., Luna, M. C. & Gil,
M. I. Preharvest and postharvest factors related to off-odours of
fresh-cut iceberg lettuce. Postharvest Biology and
Technology 86, 463–471 (2013).