2. Learning Objectives
1. Understand what is the factor analysis
technique and its applications in research
2. Discuss exploratory factor analysis (EFA)
3. Run EFA with SPSS and interpret the resulted
output
4. Estimate shortly reliability
5. Assess shortly construct validity
3. The whole works
Theory Constructs
Items linked to
constructs
EFA
Collect data
Build/Run Structural
Model
Modify the
Measurement Model
Link items to
constructs; Label
constructs
Test structural
hypotheses
Conduct CFA
Without CMB
Conduct CFA
With CMB
Conduct
Multi-group
CFA
Goodness of fit & psychometric
properties filter
Data cleaning filter
Modify the
Structural Model
Goodness of fit filter
Contribute to theory
Analyzing the factor
structure of the
multi-item data
4. Family Tree of SEM
T-test
Latent
Growth
Curve
Analysis
ANOVA
Multi-way
ANOVA Repeated
Measure
Designs
Growth
Curve
Analysis
Bivariate
Correlation
Multiple
Regression
Path
Analysis
Structural
Equation
Modeling
Factor
Analysis
Confirmatory
Factor
Analysis
Exploratory
Factor
Analysis
Source: PIRE
Is the difference
between
samples on a
variable
significant?
Is the correlation
between
different
variables
significant?
Multiple samples,
multiple variables, over
time, etc.
Multiple variables,
overall model,
measurement
model, etc.
5. SCOPE of Factor Analysis today
Factor analysis and principal component analysis
Carrying out the analyses in SPSS
Deciding on the number of factors
Rotating factors
Producing factor and component scores
Assumptions and sample size
Exploratory and confirmatory FA
6. Types of Measurement Models
Exploratory (EFA)
Confirmatory (CFA)
Multitrait-Multimethod (MTMM)
Hierarchical CFA
7. EFA vs. CFA
Exploratory Factor Analysis
is concerned with how
many factors are necessary
to explain the relations
among a set of indicators
and with estimation of factor
loadings. It is associated
with theory development.
Confirmatory Factor
Analysis is concerned with
determining if the number of
factors “conform” to what is
expected on the basis of
pre-established theory. Do
items load as predicted on
the expected number of
factors. Hypothesize
beforehand the number of
factors.
8. CONTENT:
1. Does the system provide the precise information you need?
2. Does the information content meet your needs?
3. Does the system provide reports that seem to be just about exactly what you need?
4. Does the system provide sufficient information?
ACCURACY:
1. Is the system accurate?
2. Are you satisfied with the accuracy of the system?
FORMAT:
1. Do you think the output is presented in a useful format?
2. Is the information clear?
EASE OF USE:
1. Is the system user friendly?
2. Is the system easy to use?
TIMELINESS:
1. Do you get the information you need in time?
2. Does the system provide up-to-date information?
End-User Computing Satisfaction (EUCS)
EUCS: An instrument for measuring satisfaction with an information system
9. Factor Analysis
Factor Analysis is a method for identifying a structure (or
factors, or dimensions) that underlies the relations
among a set of observed variables.
Factor analysis is a technique that transforms the
correlations among a set of observed variables into
smaller number of underlying factors, which contain all
the essential information about the linear
interrelationships among the original test scores.
Factor analysis is a statistical procedure that involves the
relationship between observed variables
(measurements) and the underlying latent factors.
10. Factor Analysis
Factor analysis is a fundamental component of Structural
Equation modeling.
Factor analysis explores the inter-relationships among
variables to discover if those variables can be grouped
into a smaller set of underlying factors.
Many variables are “reduced” (grouped) into a smaller
number of factors
These variables reflect the causal impact of the “latent”
underlying factors
Statistical technique for dealing with multiple variables
11. Explore data for patterns.
Often a researcher is unclear if items or variables have a discernible patterns. Factor Analysis
can be done in an Exploratory fashion to reveal
patterns among the inter-relationships of the items.
Data Reduction.
Factor analysis can be used to reduce a large number of variables into a smaller and more
manageable number of factors. Factor analysis can create factor scores for each subject that
represents these higher order variables.
Factor Analysis can be used to reduce a large number of variables into a parsimonious set of few
factors that account better for the underlying variance (causal impact) in the measured
phenomenon.
Confirm Hypothesis of Factor Structure.
Factor Analysis can be used to test whether a set of items designed to measure a certain
variable(s) do, in fact, reveal the hypothesized factor structure (i.e. whether the underlying latent
factor truly “causes” the variance in the observed variables and how “certain” we can be about it).
In measurement research when a researcher wishes to validate a scale with a given or
hypothesized factor structure, Confirmatory Factor Analysis is used.
Theory Testing.
Factor Analysis can be used to test a priori hypotheses about the relations among a set of
observed variables.
Applications of Factor Analysis
13. In EFA, the researcher
is attempting to explore
the relationships among
items to determine if the
items can be grouped
into a smaller number of
underlying factors.
In this analysis, all items
are assumed to be related
to all factors.
V1
V2
V3
V4
ε
ε
ε
ε
Factor 1
Factor 1
Exploratory Factor Analysis
15. Measured Variables or
Indicators:
These variables are those
that the researcher has
observed or measured.
In this example, they are
the four items on the scale.
Note, they are drawn as
rectangles or squares.
V1
V2
V3
V4
ε
ε
ε
ε
Factor 1
Factor 1
Exploratory Factor Analysis
16. Unmeasured or Latent
Variables:
These variables are not directly
measurable, rather the researcher
only
has indicators of these measures.
These variables are more often the
more interesting, but more difficult
variables
to measure (e.g., self-efficacy).
In this example, the latent variables
are the two factors.
Note, they are drawn as elipses
V1
V2
V3
V4
ε
ε
ε
ε
Exploratory Factor Analysis
Factor 1
Factor 1
17. V1
V2
V3
V4
ε
ε
ε
ε
Factor 1
Factor 1
Exploratory Factor Analysis
Factor Loadings:
Measure the relationship between
the items and the factors.
Factor loadings can be interpreted
like correlation coefficients;
ranging between -1.0 and +1.0.
The closer the value is to 1.0,
positive or negative, the stronger
the relationship between the factor
and the item.
Loadings can be both positive
or negative.
18. Factor Loadings:
Note the direction of the arrows;
the factors are thought to
influence the indicators, not
vice versa.
Each item is being predicted by
the factors.
V1
V2
V3
V4
ε
ε
ε
ε
Factor 1
Factor 1
Exploratory Factor Analysis
19. Errors in Measurement:
Each of the indicator variables has
some error in measurement.
The small circles with the ε indicate
the error.
The error is composed of 'we know
not what' or are not measured
directly.
These errors in measurement are
considered the reliability estimates
for each indicator variable.
V1
V2
V3
V4
ε
ε
ε
ε
Factor 1
Factor 1
Exploratory Factor Analysis
20. Multi-Indicator Approach
A multiple-indicator approach reduces the
overall effect of measurement error of any
individual observed variable on the accuracy of
the results
A distinction is made between observed
variables (indicators) and underlying latent
variables or factors (constructs)
Together the observed variables and the latent
variables make up the measurement model
22. Measurement Model
Items Positive Affect
(Factor 1)
Negative Affect
(Factor 2)
Joy Loading* 0
Awe Loading 0
Happiness Loading 0
Fear 0 Loading
Guilt 0 Loading
Sadness 0 Loading
*The loading is a data-driven parameter that estimates the relationships
(correlation) between an observed item and a latent factor.
23. Data Matrix must have sufficient number of correlations
Variables must be inter-related in some way since factor analysis
seeks the underlying common dimensions among the variables. If
the variables are not related each variable will be its own factor!!
Rule of thumb: substantial number of correlations greater than .30
Metric variables are assumed, although dummy variables may be
used (coded 0,1).
The factors or unobserved variables are assumed to be independent
of one another. All variables in a factor analysis must consist of at
least an ordinal scale. Nominal data are not appropriate for factor
analysis.
Assumptions of Factor Analysis
24. Quick Quips about Factor Analysis
How many cases? Rule of 10—10 cases for every item; rule of
100– number of respondents should be the larger of (1) 5 times
number of variables or (2) 100.
How many variables do I need to FA? More the better (at least 3)
Is normality of data required? Nope
Is it necessary to standardize one variables before FA? Nope
Can you pool data from two samples together in a FA? Yep, but
must show they have same factor structure.
25. Two statistics on the SPSS output allow you to look at some of the
basic assumptions.
Kaiser-Meyer-Olkin (KMO) Measure of Sampling Adequacy, and
Bartlett's Test of Sphericity
Kaiser-Meyer-Olkin Measure of Sampling Adequacy generally indicates
whether or not the variables are able to be grouped into a smaller
set of underlying factors. That is, will data factor well???
KMO varies from 0 to 1 and should be .60 or higher to proceed (can us
.50 more lenient cut-off)
High values (close to 1.0) generally indicate that a factor analysis may
be useful with your data.
If the value is less than .50, the results of the factor analysis probably
won't be very useful.
Tests for Basic Assumptions
27. KMO Statistics: Interpreting the Output
In this example, the data support the use of factor analysis and suggest that the
data may be grouped into a smaller set of underlying factors.
What does Bartlett’s Test of Sphericity explore?
28. Correlation Matrix
Bartlett's Test of Sphericity
Tests hypothesis that correlation matrix is an
identity matrix.
Diagonals are ones
Off-diagonals are zeros
Significant result indicates matrix is not an
identity matrix.
29. Bartlett’s Test of Sphericity
Bartlett’s Test of Sphericity compares your correlation matrix to an identity matrix’
An identity matrix is a correlation matrix with 1.0 on the principal diagonal and
zeros in all other correlations. So clearly you want your Bartlett value to be
significant as you are expecting relationships between your variables, if a factor
analysis is going to be appropriate!
Problem with Bartlett’s test occurs with large n’s as small correlations tend to be
statistically significant – so test may not mean much!
30. Two Extraction Methods
Principal Component Analysis
Considers all of the available variance (common + unique) (places 1’s on diagonal of
correlation matrix).
Seeks a linear combination of variables such that maximum variance is extracted—repeats
this step.
Use when there is concern with prediction, parsimony and knows specific and error variance
are small.
Results in orthogonal (uncorrelated factors)
Principal Axis Factoring (PFA) or Common Factor Analysis
• Considers only common variance (places communality estimates on diagonal of correlation
matrix).
• Seeks least number of factors that can account for the common variance (correlation) of a
set of variables.
• PAF is only analyzing common factor variability; removing the uniqueness or unexplained
variability from the model.
Called Principal Axis Factoring (PFA).
PFA preferred in SEM cause it accounts for co-variation, whereas PCS accounts for total
variance
31. Methods of Factor Extraction
Principal-axis factoring (PAF)
diagonals replaced by estimates of
communalities
iterative process
continues until negligible changes in
communalities
32. What is a Common Factor?
It is an abstraction, a hypothetical
construct that affects at least two of our
measurement variables.
We want to estimate the common factors
that contribute to the variance in our
variables.
Is this an act of discovery or an act of
invention?
33. What is a Unique Factor?
It is a factor that contributes to the
variance in only one variable.
There is one unique factor for each
variable.
The unique factors are unrelated to one
another and unrelated to the common
factors.
We want to exclude these unique factors
from our solution.
34. Comparison of Extraction Models
PCA vs. PAF
Factor loadings and eigenvalues are a little
larger with Principal Components
One may always obtain a solution with
Principal Components
Often little practical difference
FYI—Other less-used Extraction Methods (Image, alpha, ML ULS, GLS factoring)
35. Principal Components Extraction
A communality (C) is the extent to which an item correlates
with all other items.
Thus, in PCA extraction method when the initial
communalities are set to 1.0, then all of the variability of
each item is accounted for in the analysis.
Of course some of the variability is explained and some is
unexplained.
In PCA with these initial communalities set to 1.0, you are
trying to find both the common factor variance and the
unique or error variance.
36. Principal Components Extraction
Statisticians have indicated that assuming that all of the variability of
the items whether explained or unique can be accounted for in the
analysis is flawed and definitely should not be used in an
exploratory factor model.
Some researchers suggest PAF as the appropriate method for
factor extraction using EFA.
In PAF extraction, the amount of variability each item shares with all
other items is determined and this value is inserted into the
correlation matrix replacing the 1.0 on the diagonals. As a result,
PAF is only analyzing common factor variability; removing the
uniqueness or unexplained variability from the model.
37. Factor Rotation: Orthogonal
Varimax (most common)
minimizes number of variables with high loadings (or low) on a
factor—makes it possible to identify a variable with a factor
Quartimax
minimizes the number of factors needed to explain each
variable. Tend to generate a general factor on which most
variables load with med to high vales—not helpful for research
Equimax
combination of Varimax and Quartimax
Q&A:
Why use rotation method? Rotation causes factor loading to be more
clearly differentiated—necessary to facilitate interpretation
38. Non-orthogonal (oblique)
The real issue is you don’t have a basis for knowing how many
factors there are or what they are much less whether they are
correlated! Researchers assume variables are indicators of two or
more factors, a measurement model which implies orthogonal
rotation.
Direct oblimin (DO)
Factors are allowed to be correlated. Diminished interpretability
Promax
Computationally faster than DO
Used for large datasets
39. Oblique Rotation
The variables are assessed for the unique
relationship between each factor and the
variables (removing relationships that are
shared by multiple factors)
The matrix of unique relationships is called
the pattern matrix.
The pattern matrix is treated like the
loading matrix in orthogonal rotation.
40. Decisions to be made
EXTRACTION:
PCA vs PAF
ROTATION:
Orthogonal or Oblique (non-orthogonal)
41. Procedures for Factor Analysis
Multiple different statistical procedures exist by which the number of
appropriate number of factors can be identified.
These procedures are called "Extraction Methods."
By default SPSS does PCA extraction
This Principal Components Method is simpler and until more
recently was considered the appropriate method for Exploratory
Factor Analysis.
Statisticians now advocate for a different extraction method due to a
flaw in the approach that Principal Components utilizes for
extraction.
42. What else?
How many factors do you extract?
One convention is to extract all factors with
eigenvalues greater than 1 (e.g. PCA)
Another is to extract all factors with non-
negative eigenvalues
Yet another is to look at the scree plot
Number based on theory
Try multiple numbers and see what gives
best interpretation.
45. Criteria For Retention Of Factors
Eigenvalue greater than 1
Single variable has variance equal to 1
Plot of total variance - Scree plot
Gradual trailing off of variance accounted for
is called the scree.
Note cumulative % of variance of rotated
factors
46. Interpretation of Rotated Matrix
Loadings of .40 or higher
Name each factor based on 3 or 4
variables with highest loadings.
Do not expect perfect conceptual fit of all
variables.
47. Loading size based on sample
(from Hair et al 2010 Table 3-2)
Significant Factor Loadings based on Sample Size
Sample Size Sufficient Factor Loading
50 0.75
60 0.70
70 0.65
85 0.60
100 0.55
120 0.50
150 0.45
200 0.40
250 0.35
350 0.30
48. What else?
How do you know when the factor
structure is good?
When it makes sense and has a (relatively)
simple and clean structure.
Total Variance Explained > .60
How do you interpret factors?
Good question, that is where the true art of
this comes in.
51. EDM 643 51
Reflective versus Formative
Diet (Reflective)
R1. I eat healthy food.
R2. I do not each much
junk food.
R3. I have a balanced
diet.
Health (Formative)
F1. I have a balanced diet
F2. I exercise regularly
F3. I get sufficient sleep
each night
Diet
R1 R2 R3
e1 e2 e3
Health
F1 F2 F3
e3
52. EDM 643 52
Direction of causality is from
construct to measure
Measures expected to be
correlated
Indicators are
interchangeable
Direction of causality is from
measure to construct
No reason to expect the
measures are correlated
Indicators are not
interchangeable
*From Jarvis et al 2003
Diet
R1 R2 R3
e1 e2 e3
Health
F1 F2 F3
e3
Diet (Reflective) Health (Formative)
54. Validity
Face Validity (do they make sense?)
Pattern Matrix
Convergent (high loadings)
Discriminant (no cross-loadings)
Factor Correlations
≤.7 is better
EDM 643 54
55. Reliability
Split data and do two EFAs
Cronbach’s Alpha (>.70) for each factor
SPSS: Scale Reliability Analysis
EDM 643 55