This document provides information about Fine Cast Pvt. Ltd, a grey iron foundry company. It discusses the company profile, products, available facilities, and the casting process carried out. Fine Cast was established in 1973 and produces castings such as crankcases, gear cases, and engine casings. It has facilities like induction furnaces, a cupola furnace, molding machines, and testing equipment. The casting process involves melting scrap and pig iron, molding and coring with sand, pouring molten metal, knocking out and fettling castings, and testing sand properties. The goal is to optimize the gating and feeding systems of casting EP20 to reduce its high rejection rate of 2-3 cast
ESI is a world leader in the field of virtual prototypes. Based out of France, ESI now has its presence in major regions of the world. In India, they have a tie-up with DesignTech Systems to market their software solutions.
ESI has developed a set of applications for the foundry industry to improve casting yield and quality:
ProCAST
QuikCAST
SYSWELD
In recent years, key developments have taken place in computer- aided design, casting design, simulation, rapid tooling, intelligent advisory systems and Internet based engineering and most foundries are presently caught between change and survival. This is especially true in case of the foundries operating in the developing countries
This document provides an overview of Autokast Limited, an iron casting company located in Cherthala, Kerala, India. It discusses the company's production processes which include molding, melting, pouring, fettling, and inspection. Autokast produces grey iron and spheroidal graphite iron castings up to 8.5 metric tons for applications in automotive, pumps, valves, and machinery. The training report aims to study Autokast's operations and understand how its various departments work together to manufacture cast iron components.
The document provides information about Indo Farm Equipment Limited, an ISO certified company located in Himachal Pradesh, India that manufactures tractors, cranes, engines, and generators. It discusses the company's founding, facilities, research and development activities, and organizational structure. It also describes the foundry plant's objectives, core making process, types of cores used, and the activities completed during a 10-day training session in the core shop, including making different types of cores by hand and machine.
IRJET-Contact Stresses Analysis & Material Optimization of Ball Bearing using...IRJET Journal
This document discusses analyzing contact stresses and optimizing the material for ball bearings using Hertz contact theory. It begins by introducing ball bearings and their importance in rotating machinery. It then discusses selecting the proper material for ball bearings as it affects characteristics like weight, wear resistance, and stresses. The document considers replacing the typical steel balls with ceramic balls to reduce issues like electric arcing, fatigue, and overheating. It analyzes the mechanical properties and performance differences between steel, silicon nitride ceramic, zirconium oxide ceramic, and aluminum oxide using Hertz contact theory calculations and finite element modeling. The goal is to optimize the ball material choice to improve bearing performance and reliability.
A Review on Dressing and Grinding OperationIRJET Journal
This document summarizes research on dressing and grinding operations. Dressing conditions the grinding wheel to increase efficiency and productivity. Grinding is an abrasive machining process used to improve surface finish. The paper reviews how process parameters like dressing orientation, feed rate, depth of cut, and number of passes affect surface roughness, wheel performance, and wear. Recent developments in dressing and grinding are also reviewed. Different studies investigated the effects of dressing on forces, surface roughness, and wheel wear. Optimization of dressing parameters can decrease surface roughness and grinding forces.
Sukumar Ray's bio-data provides information about his educational qualifications and professional experience. He has a Ph.D in engineering from IIT Kharagpur and worked at Tata Steel for over 30 years, most recently as General Manager of Technology at Tayo Rolls. He has extensive experience in hot rolling processes, quality control, and customer support for flat steel products. Currently, Ray aims to support related industries through technical consulting and mentorship based on his expertise in metallurgy and flat rolled steel products.
This document summarizes a research paper on the design and development of a fixture for an eccentric shaft. It discusses the need for properly designed fixtures to hold eccentric workpieces securely during manufacturing operations. The paper reviews various aspects of fixture design, including locating methods, clamping elements, materials used, and the role of computer-aided fixture design (CAFD) systems in analyzing and optimizing fixture layout. The document examines several studies on topics like conformability metrics, the effects of design parameters, and algorithms for automatically generating optimal fixture configurations.
ESI is a world leader in the field of virtual prototypes. Based out of France, ESI now has its presence in major regions of the world. In India, they have a tie-up with DesignTech Systems to market their software solutions.
ESI has developed a set of applications for the foundry industry to improve casting yield and quality:
ProCAST
QuikCAST
SYSWELD
In recent years, key developments have taken place in computer- aided design, casting design, simulation, rapid tooling, intelligent advisory systems and Internet based engineering and most foundries are presently caught between change and survival. This is especially true in case of the foundries operating in the developing countries
This document provides an overview of Autokast Limited, an iron casting company located in Cherthala, Kerala, India. It discusses the company's production processes which include molding, melting, pouring, fettling, and inspection. Autokast produces grey iron and spheroidal graphite iron castings up to 8.5 metric tons for applications in automotive, pumps, valves, and machinery. The training report aims to study Autokast's operations and understand how its various departments work together to manufacture cast iron components.
The document provides information about Indo Farm Equipment Limited, an ISO certified company located in Himachal Pradesh, India that manufactures tractors, cranes, engines, and generators. It discusses the company's founding, facilities, research and development activities, and organizational structure. It also describes the foundry plant's objectives, core making process, types of cores used, and the activities completed during a 10-day training session in the core shop, including making different types of cores by hand and machine.
IRJET-Contact Stresses Analysis & Material Optimization of Ball Bearing using...IRJET Journal
This document discusses analyzing contact stresses and optimizing the material for ball bearings using Hertz contact theory. It begins by introducing ball bearings and their importance in rotating machinery. It then discusses selecting the proper material for ball bearings as it affects characteristics like weight, wear resistance, and stresses. The document considers replacing the typical steel balls with ceramic balls to reduce issues like electric arcing, fatigue, and overheating. It analyzes the mechanical properties and performance differences between steel, silicon nitride ceramic, zirconium oxide ceramic, and aluminum oxide using Hertz contact theory calculations and finite element modeling. The goal is to optimize the ball material choice to improve bearing performance and reliability.
A Review on Dressing and Grinding OperationIRJET Journal
This document summarizes research on dressing and grinding operations. Dressing conditions the grinding wheel to increase efficiency and productivity. Grinding is an abrasive machining process used to improve surface finish. The paper reviews how process parameters like dressing orientation, feed rate, depth of cut, and number of passes affect surface roughness, wheel performance, and wear. Recent developments in dressing and grinding are also reviewed. Different studies investigated the effects of dressing on forces, surface roughness, and wheel wear. Optimization of dressing parameters can decrease surface roughness and grinding forces.
Sukumar Ray's bio-data provides information about his educational qualifications and professional experience. He has a Ph.D in engineering from IIT Kharagpur and worked at Tata Steel for over 30 years, most recently as General Manager of Technology at Tayo Rolls. He has extensive experience in hot rolling processes, quality control, and customer support for flat steel products. Currently, Ray aims to support related industries through technical consulting and mentorship based on his expertise in metallurgy and flat rolled steel products.
This document summarizes a research paper on the design and development of a fixture for an eccentric shaft. It discusses the need for properly designed fixtures to hold eccentric workpieces securely during manufacturing operations. The paper reviews various aspects of fixture design, including locating methods, clamping elements, materials used, and the role of computer-aided fixture design (CAFD) systems in analyzing and optimizing fixture layout. The document examines several studies on topics like conformability metrics, the effects of design parameters, and algorithms for automatically generating optimal fixture configurations.
IRJET- Comparative Study of Multi-Storey Multi-Span G+4 Building by PEB and C...IRJET Journal
This document presents a comparative study of the design of a G+4 commercial building using pre-engineered building (PEB) and conventional steel building (CSB) concepts. The building is located in Pune, India and has dimensions of 140m length, 40m width, and 18m eave height. Both designs are analyzed using STAAD Pro software according to Indian design code IS 800-2007. Key findings from the PEB and CSB designs are compared regarding structural configuration, load assumptions, analysis methodology, and design limitations. The PEB concept is found to utilize tapered steel sections tailored to loading requirements, avoiding excess steel. In contrast, the CSB concept uses uniform hot-rolled sections fabricated on
Analysis effect of drilling parameters on hole delamination during drilling o...eSAT Journals
Abstract Glass fiber reinforced plastic (GFRP) composite materials are widely used industrial, aerospace, and automotive sector. Its have excellent properties such as high strength to weight ratio, higher fatigue limit high stiffness to weight ratio, corrosion resistance and design flexibility. Drilling is one of the major machining operations that are carried out on fiber reinforced metal composite materials to the need for components assembly. There are many problems encountered when drilling Glass fiber reinforced plastic (GFRP) composites. These problems include delaminating of the composite, poor surface roughness and hole deviation. In present experimental investigation analyse the effect of various machining parameters i.e. cutting speed, the feed rate, and the drill diameter on the quality of the drilled holes. Hole deviation of each hole is measured with help of digital vernier calliper. Taguhi's and ANOVA Technique have been employed to study the effect of the interactions between different drilling parameters on deviation of holes. After experiments suggests the optimal conditions for minimum hole deviation. Keywords: Composite Material, Deviation, GFRP, ANNOVA, and Taguchi Methods
The document summarizes research on assessing the seismic vulnerability of existing reinforced concrete (RC) buildings in India. Most RC buildings in India are designed only for gravity loads and are vulnerable in earthquakes, as evidenced by damage from recent quakes. The researchers propose a simplified capacity spectrum method for engineers to evaluate existing buildings, accounting for deficiencies in ductility. They apply this method to a representative 4-story RC building, revealing weaknesses relative to current seismic standards.
The document summarizes a report on a summer training internship at Jindal Steels and Power Ltd (JSPL) in Raigarh, Chhattisgarh, India. It discusses projects and sites visited during the 50-day internship, including the Corporate Tower Project, speedfloor construction, an ash dyke site, and a blast furnace and stock home site. Key learnings included understanding civil engineering techniques, speedfloor and foam concrete construction, safety issues for large ash dykes, and retaining wall needs for backfilling. The internship provided valuable insights into various aspects of civil engineering.
IRJET- Experimental Study on Crack Detection and Damage Index in Conventional...IRJET Journal
This document presents an experimental study on crack detection and damage assessment in conventional concrete and copper slag replaced concrete using smart aggregates with embedded piezoelectric sensors. The study aims to identify crack initiation, evaluate the feasibility of using smart aggregates in different concretes, and determine the severity of damage using a damage index. Specimens including cubes, cylinders and prisms made of conventional concrete and concretes with 20% and 40% replacement of fine aggregate with copper slag were tested. Piezoelectric sensors embedded in the specimens measured voltage changes at increasing loads, allowing identification of cracking and calculation of a damage index to quantify damage. Test results showed maximum damage occurred at specific loads for each specimen type and age, with higher damage
IRJET- Behavior of Castellated Beam with Sinusoidal OpeningsIRJET Journal
1) The document analyzes the behavior of a castellated beam with sinusoidal web openings using both Abaqus software modeling and experimental testing.
2) A castellated beam was modeled in Abaqus and subjected to a two-point loading test, similar to experimental testing. Deflections from the software and experiment were compared and found to have negligible difference.
3) Experimentally, a castellated beam was fabricated from an I-beam using a profile cutting machine. A two-point loading test setup was used to apply loads and measure deflection. Results matched closely with the Abaqus software analysis.
Review of Productivity improvement by implementing automation In manufacturin...ijsrd.com
Grinding wheels are made of natural or synthetic abrasive minerals bonded together in a matrix to form a wheel. For manufacturers, grinding wheels provide an efficient way to shape and finish metals and other materials. Grinding wheels are the only way to create parts with precision dimensions and high-quality surface finishes. At this time, grinding wheels are used in almost every industry. Manufacturing of a grinding wheel consist of mixing abrasive grains, binders and bonding materials. Three important components, abrasive grains with binders and bonding materials, make up any grinding wheel. The, additives are mixed to create a wheel with the properties necessary to shape a particular material in the manner desired. Abrasive grains include the central part of any grinding wheel, and the toughness and friability of the grinding materials will significantly affect the behavior of a given wheel. In the next step the ingredient mix is poured into the mold and compressed by a hydraulic press. Most grinding wheels are manufactured by the compression method, in which a mixture of components is pressed into shape at room temperature. The wheel is then fired at 200 0C-1260 0C depending upon the type of the bond. The purposes of the firing are to melt the binder around the abrasives and to convert it to a form that will resist the heat and solvents encountered during grinding. Variety of furnaces is used to fire grinding wheels. After firing, wheels are moved to a finishing area, where holes are reamed to the specified size and the wheel circumference is made concentric with the center. Some work may be necessary to correct thickness or parallelism of wheel sides, or to make a special contour on the side or circumference of the wheel. Sometimes balancing of large wheels is necessary to reduce the vibration that will be generated when the wheel is spun on a grinding machine.
Swapnil Nalawade is a 31-year-old mechanical engineer with 9 years of experience in design and engineering. He currently works as an Engineering Design Analyst at Tenaris Engineering India Pvt Ltd. He has expertise in 3D modeling, stress analysis, and drawing generation. Previously he has worked at Danieli India Ltd and Mukand Ltd in roles with increasing responsibility.
1) The document describes determining the forming limit diagram (FLD) for stainless steel 304 experimentally using hemispherical dome tests and validating it using computer simulation with HyperForm 11.0.
2) Tensile properties were obtained from uniaxial tensile testing and grid-marked samples were dome tested to failure to experimentally generate the FLD. A typical industrial component was also simulated in HyperForm.
3) The results of the experimental and HyperForm FLDs showed good agreement within 12.5% difference, validating the use of computer simulation to predict forming limits. Using HyperForm eliminated material waste and reduced lead times compared to experimental determination.
The document summarizes an industrial training completed by P Venkat Vijay Kumar at Vizag Steel Plant in June. It provides background on the objectives of industrial training which include gaining practical experience, developing problem-solving skills, and understanding how large organizations operate. It then gives details about Vizag Steel Plant, one of the largest steel producers in India, including its revenue, production levels, certifications, expansion plans, employees, and the department where Kumar completed his training.
Finite element analysis of center pin and bracket of jig fixture assembly ijm...Dr.Vikas Deulgaonkar
The manufacturing industry caters the range of products to satisfy the ever changing market needs.
To overcome the increasing production demands, the industry implies various techniques. We need a technique for
increasing the production of drilling two holes on a Railway Pinion, improve the quality of product and reduce the
operation time. This project aims to design the Jig and Fixture for the same. The 3-dimensional Computer Aided Model
of the components is made using CATIA V5-R21 software. To study the behavior of component, simulation is carried out.
Preprocessing of the CAD model is carried in Hypermesh software. Boundary conditions are applied using physical
situations of the components. Finite element analysis of the components is done, and the results obtained are compared
with the theoretical analysis and also with the available literature. The stresses and deformations are found within desired limits. Using FE analysis, the parts are manufactured and assembled.
IRJET- Distortion in EN-8 Plates having Different Thickness and Cross Sec...IRJET Journal
This document discusses an experimental study on distortion in butt welded joints of EN-8 steel plates with different thicknesses and groove angles. Distortion is measured as transverse and longitudinal shrinkage for plates with thicknesses of 6mm, 7mm, and 8mm welded at 600, 900, and 1200 groove angles using manual electric arc welding. The results show that both transverse and longitudinal shrinkage increase with increasing groove angle and decrease with increasing plate thickness. An analysis of variance is performed to develop mathematical models for predicting distortion, which indicate that plate thickness and groove angle significantly affect the amount of deflection in welded joints.
Study of elastic properties of RC beam under Static LoadIRJET Journal
This document summarizes a study that used finite element analysis to determine the modulus of elasticity of reinforced concrete beams with varying parameters such as grade of concrete, percentage of steel reinforcement, and spacing of shear stirrups. Finite element models of reinforced concrete beams were created in ANSYS with different concrete grades (M20, M25, M30) and percentages of steel reinforcement (0.34% to 0.74%). The models were analyzed under static loads to determine properties like cracking load and deflection. Load-deflection curves showed that beams with reinforcement had higher elastic limits and failure loads compared to plain concrete beams.
The document provides information about the steel industry and Steel Authority of India Limited (SAIL). It discusses the history and growth of the steel industry in India. It then summarizes the vision, core values, and operations of SAIL, including details about the Bhilai Steel Plant such as its establishment, production process, awards received, new products developed, and manpower details. The document also covers human resource management functions at SAIL like recruitment, training, and performance appraisal systems.
Sharana Basava.D is seeking a job in mechanical design and has over 2 years of experience in mechanical design and development. He has expertise in 3D CAD modeling, CAE analysis, casting design, and sheet metal design. Currently, he works as a Design Engineer at Harness – Design & Simulation Aid, where he develops 3D CAD models, performs casting simulations, and designs new casting methods. He has also undertaken various projects related to casting design and development.
IRJET-Surface Roughness Modeling of Titanium Alloy GrindingIRJET Journal
This document presents a study on modeling surface roughness in the grinding of titanium alloy. It aims to develop a predictive surface roughness model that relates surface roughness values to process variables like speed and depth of cut. An analytical model is developed considering factors like elastic deflections, plowing effects, and thermal effects. MATLAB simulations are also used to model the grinding wheel profile and ground surface to directly predict surface roughness. Experimental grinding tests will be conducted to validate the results from the analytical model and simulations.
IRJET- Emphasis of Plate-Thickness and Groove Angle on Distortion for Mild St...IRJET Journal
The document summarizes research into minimizing welding distortion, which is a change in shape that occurs between welded plates before and after welding. The research investigates the effect of plate thickness (6, 7, and 8mm) and groove angle (60, 90, and 120 degrees) on angular distortion in mild steel butt joints welded using manual metal arc welding (MMAW). Mathematical models are developed using response surface methodology to predict transverse and longitudinal shrinkage distortion based on plate thickness and groove angle. Analysis of variance (ANOVA) testing shows that the models accurately predict distortion. The research aims to provide empirical data to better understand different types of welding distortion.
This document contains personal and professional details of Anavaratham Arunachalam. It includes his contact information, addresses, education background and work experience. Some key points:
- Anavaratham has over 6 years of experience in mechanical design for heavy machinery, automobiles and conveyor products.
- He has worked at companies like Axiscades Technologies, Wipro Technologies and HCL Technologies designing components for excavators, sheet metal enclosures and wafer inspection equipment.
- Anavaratham's technical skills include Pro-E, SolidWorks, AutoCAD and he has experience working on projects for clients like Caterpillar and JLG.
IRJET- Comparative Study of Rc Structure with Different Infill MaterialsIRJET Journal
This document compares the seismic performance of a G+5 reinforced concrete building with different infill materials through structural analysis. It models the building with conventional brick infill, conventional brick infill with partitions, autoclaved aerated concrete block infill, and autoclaved aerated concrete block infill with partitions. The analysis finds that using light weight autoclaved aerated concrete blocks results in lower base shear forces, steel reinforcement requirements, footing reactions, and displacements compared to conventional brick infill. This indicates that a building with autoclaved aerated concrete block infill provides better seismic performance.
Image segmentation, Rough set Theory, Game Theory, Image processingijsrd.com
Valve is most common part for every Fluid handling industry. Production of cast Valve is critical because, in today's competitive world customer wants fast and accurate Component. Computer simulation tools are used to reduce a time for development of a component. Simulation software is mainly used to visualize a complete process of solidification, which is not possible in real casting process. Defects such as shrinkage porosity, gas porosity, unfilled mould, cold shut etc. can also graphically observe with simulation. Initially CAD model of impeller has been prepared, then export for simulation. Many researchers reported that about 90% of the defects in castings are due to wrong design of gating system and only 10% due to manufacturing problems. Casting simulation process can able to solve these problems. To study the solidification behavior and detection of hot spots in castings with the help of casting simulation software. The simulated results also compared with the experimental works.
Design and Analysis of fluid flow in AISI 1008 Steel reduction gear boxIRJET Journal
This document summarizes a research paper that analyzes fluid flow in an AISI 1008 steel reduction gearbox using computer simulation. The researchers redesigned the gearbox model in CATIA and analyzed it using casting simulation software to optimize the design and minimize defects from shrinkage, hotspots, and solidification time. They simulated the original design and a modified design with changes to the riser and gating system dimensions. The simulations aimed to improve yield by reducing porosity and defects in the casting.
IRJET- Comparative Study of Multi-Storey Multi-Span G+4 Building by PEB and C...IRJET Journal
This document presents a comparative study of the design of a G+4 commercial building using pre-engineered building (PEB) and conventional steel building (CSB) concepts. The building is located in Pune, India and has dimensions of 140m length, 40m width, and 18m eave height. Both designs are analyzed using STAAD Pro software according to Indian design code IS 800-2007. Key findings from the PEB and CSB designs are compared regarding structural configuration, load assumptions, analysis methodology, and design limitations. The PEB concept is found to utilize tapered steel sections tailored to loading requirements, avoiding excess steel. In contrast, the CSB concept uses uniform hot-rolled sections fabricated on
Analysis effect of drilling parameters on hole delamination during drilling o...eSAT Journals
Abstract Glass fiber reinforced plastic (GFRP) composite materials are widely used industrial, aerospace, and automotive sector. Its have excellent properties such as high strength to weight ratio, higher fatigue limit high stiffness to weight ratio, corrosion resistance and design flexibility. Drilling is one of the major machining operations that are carried out on fiber reinforced metal composite materials to the need for components assembly. There are many problems encountered when drilling Glass fiber reinforced plastic (GFRP) composites. These problems include delaminating of the composite, poor surface roughness and hole deviation. In present experimental investigation analyse the effect of various machining parameters i.e. cutting speed, the feed rate, and the drill diameter on the quality of the drilled holes. Hole deviation of each hole is measured with help of digital vernier calliper. Taguhi's and ANOVA Technique have been employed to study the effect of the interactions between different drilling parameters on deviation of holes. After experiments suggests the optimal conditions for minimum hole deviation. Keywords: Composite Material, Deviation, GFRP, ANNOVA, and Taguchi Methods
The document summarizes research on assessing the seismic vulnerability of existing reinforced concrete (RC) buildings in India. Most RC buildings in India are designed only for gravity loads and are vulnerable in earthquakes, as evidenced by damage from recent quakes. The researchers propose a simplified capacity spectrum method for engineers to evaluate existing buildings, accounting for deficiencies in ductility. They apply this method to a representative 4-story RC building, revealing weaknesses relative to current seismic standards.
The document summarizes a report on a summer training internship at Jindal Steels and Power Ltd (JSPL) in Raigarh, Chhattisgarh, India. It discusses projects and sites visited during the 50-day internship, including the Corporate Tower Project, speedfloor construction, an ash dyke site, and a blast furnace and stock home site. Key learnings included understanding civil engineering techniques, speedfloor and foam concrete construction, safety issues for large ash dykes, and retaining wall needs for backfilling. The internship provided valuable insights into various aspects of civil engineering.
IRJET- Experimental Study on Crack Detection and Damage Index in Conventional...IRJET Journal
This document presents an experimental study on crack detection and damage assessment in conventional concrete and copper slag replaced concrete using smart aggregates with embedded piezoelectric sensors. The study aims to identify crack initiation, evaluate the feasibility of using smart aggregates in different concretes, and determine the severity of damage using a damage index. Specimens including cubes, cylinders and prisms made of conventional concrete and concretes with 20% and 40% replacement of fine aggregate with copper slag were tested. Piezoelectric sensors embedded in the specimens measured voltage changes at increasing loads, allowing identification of cracking and calculation of a damage index to quantify damage. Test results showed maximum damage occurred at specific loads for each specimen type and age, with higher damage
IRJET- Behavior of Castellated Beam with Sinusoidal OpeningsIRJET Journal
1) The document analyzes the behavior of a castellated beam with sinusoidal web openings using both Abaqus software modeling and experimental testing.
2) A castellated beam was modeled in Abaqus and subjected to a two-point loading test, similar to experimental testing. Deflections from the software and experiment were compared and found to have negligible difference.
3) Experimentally, a castellated beam was fabricated from an I-beam using a profile cutting machine. A two-point loading test setup was used to apply loads and measure deflection. Results matched closely with the Abaqus software analysis.
Review of Productivity improvement by implementing automation In manufacturin...ijsrd.com
Grinding wheels are made of natural or synthetic abrasive minerals bonded together in a matrix to form a wheel. For manufacturers, grinding wheels provide an efficient way to shape and finish metals and other materials. Grinding wheels are the only way to create parts with precision dimensions and high-quality surface finishes. At this time, grinding wheels are used in almost every industry. Manufacturing of a grinding wheel consist of mixing abrasive grains, binders and bonding materials. Three important components, abrasive grains with binders and bonding materials, make up any grinding wheel. The, additives are mixed to create a wheel with the properties necessary to shape a particular material in the manner desired. Abrasive grains include the central part of any grinding wheel, and the toughness and friability of the grinding materials will significantly affect the behavior of a given wheel. In the next step the ingredient mix is poured into the mold and compressed by a hydraulic press. Most grinding wheels are manufactured by the compression method, in which a mixture of components is pressed into shape at room temperature. The wheel is then fired at 200 0C-1260 0C depending upon the type of the bond. The purposes of the firing are to melt the binder around the abrasives and to convert it to a form that will resist the heat and solvents encountered during grinding. Variety of furnaces is used to fire grinding wheels. After firing, wheels are moved to a finishing area, where holes are reamed to the specified size and the wheel circumference is made concentric with the center. Some work may be necessary to correct thickness or parallelism of wheel sides, or to make a special contour on the side or circumference of the wheel. Sometimes balancing of large wheels is necessary to reduce the vibration that will be generated when the wheel is spun on a grinding machine.
Swapnil Nalawade is a 31-year-old mechanical engineer with 9 years of experience in design and engineering. He currently works as an Engineering Design Analyst at Tenaris Engineering India Pvt Ltd. He has expertise in 3D modeling, stress analysis, and drawing generation. Previously he has worked at Danieli India Ltd and Mukand Ltd in roles with increasing responsibility.
1) The document describes determining the forming limit diagram (FLD) for stainless steel 304 experimentally using hemispherical dome tests and validating it using computer simulation with HyperForm 11.0.
2) Tensile properties were obtained from uniaxial tensile testing and grid-marked samples were dome tested to failure to experimentally generate the FLD. A typical industrial component was also simulated in HyperForm.
3) The results of the experimental and HyperForm FLDs showed good agreement within 12.5% difference, validating the use of computer simulation to predict forming limits. Using HyperForm eliminated material waste and reduced lead times compared to experimental determination.
The document summarizes an industrial training completed by P Venkat Vijay Kumar at Vizag Steel Plant in June. It provides background on the objectives of industrial training which include gaining practical experience, developing problem-solving skills, and understanding how large organizations operate. It then gives details about Vizag Steel Plant, one of the largest steel producers in India, including its revenue, production levels, certifications, expansion plans, employees, and the department where Kumar completed his training.
Finite element analysis of center pin and bracket of jig fixture assembly ijm...Dr.Vikas Deulgaonkar
The manufacturing industry caters the range of products to satisfy the ever changing market needs.
To overcome the increasing production demands, the industry implies various techniques. We need a technique for
increasing the production of drilling two holes on a Railway Pinion, improve the quality of product and reduce the
operation time. This project aims to design the Jig and Fixture for the same. The 3-dimensional Computer Aided Model
of the components is made using CATIA V5-R21 software. To study the behavior of component, simulation is carried out.
Preprocessing of the CAD model is carried in Hypermesh software. Boundary conditions are applied using physical
situations of the components. Finite element analysis of the components is done, and the results obtained are compared
with the theoretical analysis and also with the available literature. The stresses and deformations are found within desired limits. Using FE analysis, the parts are manufactured and assembled.
IRJET- Distortion in EN-8 Plates having Different Thickness and Cross Sec...IRJET Journal
This document discusses an experimental study on distortion in butt welded joints of EN-8 steel plates with different thicknesses and groove angles. Distortion is measured as transverse and longitudinal shrinkage for plates with thicknesses of 6mm, 7mm, and 8mm welded at 600, 900, and 1200 groove angles using manual electric arc welding. The results show that both transverse and longitudinal shrinkage increase with increasing groove angle and decrease with increasing plate thickness. An analysis of variance is performed to develop mathematical models for predicting distortion, which indicate that plate thickness and groove angle significantly affect the amount of deflection in welded joints.
Study of elastic properties of RC beam under Static LoadIRJET Journal
This document summarizes a study that used finite element analysis to determine the modulus of elasticity of reinforced concrete beams with varying parameters such as grade of concrete, percentage of steel reinforcement, and spacing of shear stirrups. Finite element models of reinforced concrete beams were created in ANSYS with different concrete grades (M20, M25, M30) and percentages of steel reinforcement (0.34% to 0.74%). The models were analyzed under static loads to determine properties like cracking load and deflection. Load-deflection curves showed that beams with reinforcement had higher elastic limits and failure loads compared to plain concrete beams.
The document provides information about the steel industry and Steel Authority of India Limited (SAIL). It discusses the history and growth of the steel industry in India. It then summarizes the vision, core values, and operations of SAIL, including details about the Bhilai Steel Plant such as its establishment, production process, awards received, new products developed, and manpower details. The document also covers human resource management functions at SAIL like recruitment, training, and performance appraisal systems.
Sharana Basava.D is seeking a job in mechanical design and has over 2 years of experience in mechanical design and development. He has expertise in 3D CAD modeling, CAE analysis, casting design, and sheet metal design. Currently, he works as a Design Engineer at Harness – Design & Simulation Aid, where he develops 3D CAD models, performs casting simulations, and designs new casting methods. He has also undertaken various projects related to casting design and development.
IRJET-Surface Roughness Modeling of Titanium Alloy GrindingIRJET Journal
This document presents a study on modeling surface roughness in the grinding of titanium alloy. It aims to develop a predictive surface roughness model that relates surface roughness values to process variables like speed and depth of cut. An analytical model is developed considering factors like elastic deflections, plowing effects, and thermal effects. MATLAB simulations are also used to model the grinding wheel profile and ground surface to directly predict surface roughness. Experimental grinding tests will be conducted to validate the results from the analytical model and simulations.
IRJET- Emphasis of Plate-Thickness and Groove Angle on Distortion for Mild St...IRJET Journal
The document summarizes research into minimizing welding distortion, which is a change in shape that occurs between welded plates before and after welding. The research investigates the effect of plate thickness (6, 7, and 8mm) and groove angle (60, 90, and 120 degrees) on angular distortion in mild steel butt joints welded using manual metal arc welding (MMAW). Mathematical models are developed using response surface methodology to predict transverse and longitudinal shrinkage distortion based on plate thickness and groove angle. Analysis of variance (ANOVA) testing shows that the models accurately predict distortion. The research aims to provide empirical data to better understand different types of welding distortion.
This document contains personal and professional details of Anavaratham Arunachalam. It includes his contact information, addresses, education background and work experience. Some key points:
- Anavaratham has over 6 years of experience in mechanical design for heavy machinery, automobiles and conveyor products.
- He has worked at companies like Axiscades Technologies, Wipro Technologies and HCL Technologies designing components for excavators, sheet metal enclosures and wafer inspection equipment.
- Anavaratham's technical skills include Pro-E, SolidWorks, AutoCAD and he has experience working on projects for clients like Caterpillar and JLG.
IRJET- Comparative Study of Rc Structure with Different Infill MaterialsIRJET Journal
This document compares the seismic performance of a G+5 reinforced concrete building with different infill materials through structural analysis. It models the building with conventional brick infill, conventional brick infill with partitions, autoclaved aerated concrete block infill, and autoclaved aerated concrete block infill with partitions. The analysis finds that using light weight autoclaved aerated concrete blocks results in lower base shear forces, steel reinforcement requirements, footing reactions, and displacements compared to conventional brick infill. This indicates that a building with autoclaved aerated concrete block infill provides better seismic performance.
Image segmentation, Rough set Theory, Game Theory, Image processingijsrd.com
Valve is most common part for every Fluid handling industry. Production of cast Valve is critical because, in today's competitive world customer wants fast and accurate Component. Computer simulation tools are used to reduce a time for development of a component. Simulation software is mainly used to visualize a complete process of solidification, which is not possible in real casting process. Defects such as shrinkage porosity, gas porosity, unfilled mould, cold shut etc. can also graphically observe with simulation. Initially CAD model of impeller has been prepared, then export for simulation. Many researchers reported that about 90% of the defects in castings are due to wrong design of gating system and only 10% due to manufacturing problems. Casting simulation process can able to solve these problems. To study the solidification behavior and detection of hot spots in castings with the help of casting simulation software. The simulated results also compared with the experimental works.
Design and Analysis of fluid flow in AISI 1008 Steel reduction gear boxIRJET Journal
This document summarizes a research paper that analyzes fluid flow in an AISI 1008 steel reduction gearbox using computer simulation. The researchers redesigned the gearbox model in CATIA and analyzed it using casting simulation software to optimize the design and minimize defects from shrinkage, hotspots, and solidification time. They simulated the original design and a modified design with changes to the riser and gating system dimensions. The simulations aimed to improve yield by reducing porosity and defects in the casting.
The document discusses the design of a forging die for a planetary gear blank. It begins with an introduction to forging as a metalworking process and advantages it provides over other manufacturing methods. It then outlines the objectives and methodology for the die design project. The methodology involves designing the final gear part geometry, determining stock size requirements, and designing the forging die. Key die design considerations discussed include parting line selection, drafting angles, fillet and corner radii, flash and gutter design, and shrinkage allowance. The document concludes with CAD drawings of the designed forging die.
This document describes the design and manufacturing of an acrylic jig for drilling operations at Kirloskar Ebara Pumps Limited. Problems were occurring due to manual marking for drilling, including errors in hole placement and spacing. The authors designed a modular acrylic jig with two pitch circle diameters to improve accuracy and reduce production time. They manufactured the jig using acrylic material to lower costs compared to traditional metallic jigs. Testing showed the acrylic jig eliminated errors and reduced idle time, helping to meet delivery deadlines.
Design and Analysis of a Bell Type Rocket NozzleIRJET Journal
This document describes the design and analysis of a bell type rocket nozzle. It discusses the various steps involved in designing the nozzle using G.V. Rao's method, including pre-processing, material selection, CAD modeling, meshing in ANSYS, applying boundary conditions, extracting results, and visualizing the stress, strain and deformation results. The structural analysis found that the stresses produced were much below the material limits, indicating the nozzle design could sustain the loads without failure or significant changes to the contour.
CASTING DEFECTS ANALYSIS OF SWASH PLATE (PVB10 YOKE) USING SIMULATIONIRJET Journal
This document discusses using casting simulation software to analyze and reduce defects in castings of a swash plate component (PVB10 Yoke). It conducted four trials over multiple months: the first using traditional methods resulted in 42.5% rejection due to shrinkage porosity and other defects. The second trial placed a core but rejection remained high. The third trial used casting simulation software which identified riser size as the cause of shrinkage porosity. The fourth trial increased riser size, resulting in only 5% rejection. Using simulation enabled identifying the root cause of defects and reducing the rejection rate from 42.5% to 5% for the swash plate casting.
Minimization of Shrinkage Porosity in A Sand Casting Process By Simulation I...IJMER
There is an increasing demand in manufacturing environment for the best quality of casting
products at the right time and quantity. In order to survive in the competitive market and to achieve
customer satisfaction trial-and-error method to produce defect free casting products from design to
manufacturing is too costly and not effective [1]. Modernization is the only key to improve casting quality
and productivity. This paper discusses the simulation process of casting solidification with the AutoCAST-X
software of a intricate shape small size casting of LM6 (Al alloy) metal. With the help of simulation study
hot spot in the casting has been identified. This has immensely helped in locating the optimum position and
size of the feeder required. This paper also shows the application of feeding aids as exothermic sleeve. The
simulation study has shown the improvement in feeding yield and quality of the casting.
Optimization of sealing casting by identifying solidification defect and impr...IRJET Journal
1. The document discusses optimization of sealing castings through casting simulation. It aims to identify solidification defects in sealing castings and minimize them by optimizing the casting design using simulation software.
2. The current sealing casting design is analyzed using casting simulation software to identify solidification defects like shrinkage and misruns. Modifications are then made to the design using simulation to improve strength.
3. The methodology involves 3D modeling the casting, meshing it, applying material properties and boundary conditions in simulation software, and analyzing the results to identify defects and optimize the design.
Optimization of sealing casting by identifying solidification defect and impr...IRJET Journal
1. The document discusses optimization of sealing castings through casting simulation. It aims to identify solidification defects in sealing castings and minimize them by optimizing the casting design using simulation software.
2. The current sealing casting design is analyzed using casting simulation software to identify solidification defects like shrinkage and misruns. Modifications are then made to the design using simulation to improve strength.
3. The methodology involves 3D modeling the casting, meshing it, applying material properties and boundary conditions in simulation software, and analyzing the results to identify defects and optimize the design.
This document summarizes a study that used casting simulation software to model and optimize the sand casting process for a steel flywheel. The researchers first modeled the flywheel component along with gating and risering systems. Simulation of the initial model revealed shrinkage defects. The model was modified by changing the ingate locations and adding risers, which directionally solidified the casting. The modified model was then simulated using ADSTEFAN software to analyze fluid flow, solidification patterns, and potential defects like shrinkage and porosity. The simulation results helped optimize the casting design to improve quality and yield.
IRJET- Solidification Simulation of the Casting to Predict and Eliminate ...IRJET Journal
1) The document discusses using casting simulation software to optimize a riser design and eliminate shrinkage defects in a casting.
2) An initial simulation of the casting part without risers showed shrinkage defects. Modifications to the riser design, including increasing the number and moving the location of risers further from the casting, resulted in directional solidification and the elimination of shrinkage defects in the casting part.
3) Casting simulation allows redesigning riser systems virtually to improve yield and reduce defects without physical trial and error.
IRJET- Use of Casting Simulation for Yield Improvement.IRJET Journal
This document discusses using casting simulation software to improve the yield of brake drum castings. The current yield for a company is 66.57%. The researchers used AutoCAST-X simulation software to simulate casting of a brake drum part. The initial gating system design resulted in micro porosity and blow holes. The researchers modified the gating system design by adding directional solidification chills and changing the riser locations and sizes. The simulation of the modified design showed defect-free solidification without porosity or blow holes in the casting. Implementing the modified gating system improved the casting yield from 66.57% to 81.68%, reducing waste and increasing productivity and profits.
Sand casting conventional and rapid prototyping manufacturing approacheseSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
IRJET- Quality Improvement in Cover Support Casting using Auto-CAST SoftwareIRJET Journal
This document discusses quality improvement in cover support casting using Auto-CAST simulation software. It begins with an introduction to casting defects caused by improper gating system design and discusses how simulation software can be used to detect defects. It then describes the steps taken to simulate a cover support casting part using Auto-CAST software. This included importing the 3D CAD model, modifying the gating system design based on simulation results, and evaluating the simulation output to identify shrinkage defects. The optimized gating system improved the casting yield from 70.56% to 71.0% while reducing defects like shrinkage and cracks. In conclusion, gating system optimization through simulation helps minimize defects and improve casting yields.
The document discusses quality improvement in cover support casting using Auto-CAST simulation software. It begins with an introduction to casting defects caused by improper gating system design and discusses how simulation software can help identify hot spots and optimize the gating system. It then details the steps taken to simulate a cover support casting part using Auto-CAST software. This included importing the 3D CAD model, modifying the gating system based on simulation results, and identifying shrinkage defects. The optimized gating system improved the casting yield from 70.56% to 71.0% while reducing defects like shrinkage and cracks. In conclusion, gating system optimization through simulation helps minimize defects and improve casting yields.
FE Analysis for Investment Casting and Computer Simulation: A Reviewijsrd.com
In the present paper a review for the experimental and finite element analysis techniques is adopted for Investment casting. Experimental Data taken for Solidification of investment Casting is modeled and meshed initially then validation is followed by comparing the experimental and modeled results. This helps to optimize the design criteria for investment casting. To overcome the problem of current gating /riser system and by comparing simulation results of optimized casting model with that of original model we can reduce the shrinkage porosity.
Design of Fixture for rotary welding SPMIRJET Journal
This document discusses the design of a fixture for rotary welding on a special purpose machine (SPM). The fixture is designed to hold vehicle parts like the steering shaft, steering stem, and under bracket that require rotary welding. The fixture design process involves conceptualizing, CAD modeling, material selection, and finite element analysis. EN31 steel is selected for its strength and hardness properties. The fixture assembly consists of top and bottom plates connected by two pillars. Analysis in ANSYS shows the maximum stresses and deformations are below permissible limits, indicating the fixture can safely support the assumed 8 kg workpiece weight. The designed fixture aims to improve welding quality, productivity, and reduce errors compared to manual welding.
IRJET- Design and Development of a Bandsaw Machine Roller Bracket for Wei...IRJET Journal
This document summarizes a study on optimizing the weight of roller brackets used in a horizontal bandsaw machine. The researchers used topology optimization tools in Altair Hyperworks to reduce the weight of the roller bracket by 27%, saving approximately Rs. 336 per machine. They validated the optimized design through stress analysis in Hyperworks and experimental testing using a photoelastic model and polariscope instrument. The optimized bracket design was then 3D printed to verify functionality. Overall, the study achieved the goals of reducing material usage, costs, and improving the environmental sustainability of the machine tool.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
We would send hard copy of Journal by speed post to the address of correspondence author after online publication of paper.
We will dispatched hard copy to the author within 7 days of date of publication
This document summarizes casting defects and remedies. It discusses common casting defects like blowholes, pinholes, shrinkage, misruns, slag inclusions, hot tears, swell, and drops. For each defect, the document describes the causes and recommended remedies to reduce or eliminate the defects. The goal is to improve casting quality and productivity by minimizing defects. Key remedies discussed include controlling moisture in sand, using proper venting, ensuring proper pouring temperatures, reducing residual stresses, and optimizing mold design.
1. 1
CHAPTER: 1 COMPANY PROFILE
1.1 INTRODUCTION
We are carrying out Project Work in FINE CAST Pvt. Ltd., V.U. Nagar.
Fig. 1.1 Company Logo
It was established in 1973.
The company is ISO 9001: 2008 certified.
It is Grey Cast Iron Foundry Industry.
Contact details: www.finecast.co.in
Its Current Customers are Elecon, Ingersollrand, etc.
1.2 COMPANY PRODUCTS
Frequent products cast by the company include Crank case, Gear case, Housings,
Pulleys, Engine Casings etc.
Few of them are shown in fig. 1.2 (a), (b), (c), (d), (e), (f), (g).
(a) (b) (c) (d)
(e) (f) (g)
Fig. 1.2 Company Products
2. 2
1.3 AVAILABLE FACILITIES
Tilting type Induction Furnaces- two (1000 kg each); Fig. 1.3 (a)
Cupola Furnace; Fig. 1.3 (b)
Tilting type Pouring Ladles-three (having different capacity); Fig. 1.3 (c)
Sand Mixing Muller-three (having different capacity); Fig. 1.3 (d)
Conveyor for molding sand
Molding Machines (of different capacity of ramming pressures); Fig. 1.3 (e)
Carbon Equivalent Meter; Fig. 1.3 (f)
Knock out Machine; Fig. 1.3 (g)
Shot blasting Machines
Sand Reclamation unit and bucket type conveyor
Various Grinders in Fettling shop; Fig. 1.3 (h)
Sand Testing Laboratory (Including Sand siever, Sand rammer, Hot plate, Active clay
setup, Compactibility scale, Moisture content tester, Green compressive strength
tester, Permeability tester, Mould & core hardness tester); Fig 1.3.1 (a) to (i)
(a) (b) (c)
(d) (e) (f)
(g) (h)
Fig. 1.3 Molding & Other Equipments
Courtesy of FINE CAST PVT. LTD.
4. 4
CHAPTER: 2 PROBLEM DEFINITION
2.1 INTRODUCTION
Company has Casting coded EP20, which has very high rejection rate. It is shown in
fig. 2.1.
This is because it is hand molded owing to its size.
We are intended to modify their gating and feeding systems so that its rejection rate
may reduce.
It has 240 kg weight. 2 or 3 rejections affect a lot in overall yield and lead to heavy
losses.
2.2 REJECTION RATE
The frequency of the order for EP20 is 15 castings per month.
Monthly Rejection rate of this casting is shown in fig. 2.2.
2.3 DEFINITION
“Design Optimization of Gating System and Casting Simulation for Cast Iron”
Fig. 2.1 EP20 Casting Fig. 2.2 Rejection Rate
Courtesy of FINE CAST PVT. LTD.
0
1
2
3
4
5
6
May '13 June '13 July '13 August '13
RejectionQty
Month
5. 5
CHAPTER: 3 METHODOLOGY
1. Study of Defects in the cast parts
2. Analyzing probable causes of frequently occurring defects
3. Analyzing rejection rates due to defects for casting
4. Review of Literature for Casting Simulation
5. Solid Modeling of casting using Pro-E
6. Manual Gating system and Riser Designs for casting
7. Study of the casting simulation software
8. Solidification Simulation for Proposed Method & its Optimization
9. Comment on other frequently occurring defects
6. 6
CHAPTER: 4 LITERATURE REVIEW
Sr.
No.
Author Title Conclusion/Abstract Journal
1 K.D.
Carlson,
R.A.
Hardin,
Shouzhu Ou
& C.
Beckermann
Development
of new feeding
distance rules
using casting
simulation:
Part 1.
Methodology
- Developed a methodology to relate
measured shrinkage porosity levels
in steel castings to predictions
from casting simulation, to
determine feeding distances.
- Experimental shrinkage level is
expressed as ASTM shrinkage X-
ray level.
- Predicted value for this is expressed
in terms of Niyama criterion.
Metallurgical
and materials
transactions B;
vol 33 B,
October 2002-
731
2 K.D.
Carlson,
R.A.
Hardin,
Shouzhu Ou
& C.
Beckermann
Development
of new feeding
distance rules
using casting
simulation:
Part 2. The
new rules
- Developed the rules to produce
radiographically sound castings.
- Rules for riser zone length, end
zone length, end effect feeding
distance and lateral feeding
distance for top risers, and feeding
distance for side risers are
developed.
- Extension of these rules for the
provision of feed-aids such as
chills.
Metallurgical
and materials
transactions B;
vol 33 B,
October 2002-
741
3 B. Ravi,
R.C. Creese
& D.
Ramesh
Design for
casting- A new
paradigm for
preventing
potential
problems
- Often, product design causes severe
problems at the casting stage, in
terms of defects and difficulties in
molding.
- Significant design modifications at
this stage lead to heavy losses.
- Simulation provides the way out by
virtual trials during the very design
stage of product.
Transactions
of the
American
Foundry
Society, 107,
1999
4 K. Singh,
P.K. Reddy,
D. Joshi, K.
Subburaj &
B. Ravi
3D junctions in
castings:
Simulation
based DFM
Analysis and
Guidelines
- Casting defects, which can’t be
eliminated by changes in tooling
and process parameters, can be
attributed to poor design of the part
wrt manufacturability.
- These defects can be predicted by
simulation, and corrected by minor
changes in part design.
- Junctions are regions of high
thermal concentration so changes
must be made in them by
referring result of simulation.
INAE-
ICAMT 2008,
Feb. 6-8, 2008
7. 7
5 B.G.
Thomas
Issues in
thermal-
mechanical
modeling of
casting
processes
- Stress modeling begins with a
coupled, transient heat transfer
analysis, including solidification,
shrinkage dependent interfacial heat
transfer, & fluid flow effects.
- Numerical calculation of stress-strain
that arises during solidification is
important to predict surface shape
and cracking problems.
Iron & Steel
inst. Of
Japan
International,
Vol.35, No.
6,
1995,pp.737-
743
6 Mark Jolly Casting
Simulation:
How well do
reality and
virtual casting
match? State of
the art review
- The interface heat transfer co-
efficient is probably the most
fudged part of casting modeling.
- Defects must be represented
graphically so that anyone can
easily interpret that.
Int. J. Cast
Metals Res.,
2002, 14,
303-313
7 Z. Guo, N.
Saunders,
A.P.
Miodownik
& J.-Ph.
Schille
Modeling of
materials
properties and
behavior
critical to
casting
simulation
- Development and calibration of
software used to calculate thermo-
physical properties of the mold-
metal and interface.
- These properties must be known
accurately as they are needed in
solidification simulation as inputs.
- These properties alter substantially
even by small change in
composition.
Materials
science and
engineering
A 413-414
(2005) 465-
469
8 Dr. B. Ravi Casting
Simulation and
Optimization:
Benefits,
Bottlenecks,
and best
Practices
- Casting simulation can predict
location of internal defects and
visualize mold filling, solidification
and cooling.
- Casting simulation can enhance the
productivity and success of method
engineer, but can’t replace him.
Tech. paper
for Indian
Foundry
journal Jan.
2008 Special
issue
9 Dr. B. Ravi,
D. Joshi &
K. Singh
Part, Tooling
and method
optimization
driven by
Castability
analysis and
cost model
- Evaluation of the simulation result
using three quality indices:
moldability, fillability & feedablity.
- This evaluation leads to modified
part, tooling & method design and
in turn reduces the cost
substantially.
1. Moldability- Deviation from the
designed shape
2. Fillability- Effects of mold filling
characteristics
3. Feedability- Effects of solidification
characteristics
68th
world
foundry
congress,
Chennai, 7-
10 feb. 2008
8. 8
10 T.R.
Vijayaram,
S. Sulaiman,
A.M.S.
Hamouda &
M.H.M.
Ahmad
Numerical
simulation of
casting
solidification
in permanent
metallic molds
- Solidification simulation of casting
can be performed by FDM, FEM,
FVM and BEM.
- It can identify defective location in
the casting generated time-
temperature contours.
Journal of
materials
processing
technology
178 (2006) 29-
33
11 Dr. B. Ravi Casting
simulation-
Best practices
- Casting simulation helps in (a)
quality or yield improvement of
existing castings and (b) rapid
development of new castings.
- Input 3d part model must be as-
cast part not the machined part (in
STL format).
- As curved surface is approximated
by a no. of triangles, even a small
fillet can lead to large increase in
file size.
- So, small features can be safely
removed from CAD model,
without much affecting the result,
to reduce the computation time.
Trans. Of 58th
IFC,
Ahmedabad
(2010)
12 B. Ravi &
M.N.
Srinivasan
Feature
recognition
and analysis
for molded
components
- Methods for obtaining the solid
corresponding to the feature, based
solely on BRep, have been
developed for the design of
pattern, mold, core & core-box.
13 Dr. B. Ravi Computer
aided casting
method design,
simulation and
optimization
- Latest version of AUTOCAST is
able to create entire core model &
feeder model automatically.
- More feeders can be created by
specifying their positions. Feed-
aids can also be applied.
- Gating system can be created after
specifying the positions of gates on
the part. Sprue location is to be
specified and runners are created
automatically.
- So, design, simulation &
optimization of method layout is
easily carried out using simulation
software.
Inst. Of Indian
Foundry men
(Indore
chapter), 13
march 2008
9. 9
14 V.M.
Gopinath,
A.
Venkatesan
& A.
Rajadurai
Simulation of
casting soli.
and its grain
structure
prediction
using FEM
- In addition to temperature
distribution, grain structure of the
casting can be predicted by
extending the program to
calculate G (temp. gradient), R
(interface velo.) and dT/dt (soli.
rate).
Journal of
materials
processing
technology
168 (2005) 10-
15
15 B. Ravi &
M.N.
Srinivasan
Casting
solidification
analysis by
modulus vector
method
- Discovered a new geometry driven
method called Modulus Vector
Method for identifying hot spots &
simulations of feeding paths.
- Simulation based on this method is
less sensitive to inaccurate values
of interface heat transfer co-
efficient value.
Int. J. Cast
metals Res.
1996, 9,1-7
16 K.S. Chan,
K.
Pericleous
& M. Cross
Numerical
simulation of
flows
encountered
during mold
filling
- Described a model to simulate
flows & interface activity during
the filling of 3-d casting molds.
- The equations governing the
complex physical phenomenon of
mold filling are Navier- Stokes
equations, Continuity equation
and turbulent viscosity equation.
Appl. Math.
Modeling,
1991, vol. 15,
nov./dec.
10. 10
CHAPTER: 5 CASTING PROCESS
5.1 INTRODUCTION
It is the process of manufacturing in which molten metal is poured in the cavity,
known as mold cavity, so that solidified metal takes the shape of the cavity. The
solidified metal is called Casting and the process is called Casting Process.
Mold cavity is prepared by patterns. It is always larger in size than the actual casting.
Fig. 5.1 (a) shows various terms related to casting process.
Fig. 5.1 (a) Terms Related To Casting Process
Classification of Casting Processes is shown in fig. 5.1 (b).
Fig. 5.1 (b) Classification of Casting Processes
11. 11
5.2 CASTING PROCESS CARRIED OUT AT FINE CAST
1. Melting Practice:
As Fine Cast is producing Grey iron castings, they are equipped with a cupola and two
tilting type induction furnaces (of 1 ton melting capacity). In usual running, one induction
furnace is operated and other is prepared in terms of refractory lining. Induction furnace
is better than cupola in terms of melting time and composition control of the desired melt.
Typical charge calculation (of 1 ton) include 500 kg of bead scrap, 130 kg of steel scrap,
350 kg of return riser, 180 kg of pig iron, 8 kg of silicon, 9 kg of carbon, 800 gm of
manganese and 600 gm of INOCULATION (Graphite and Silicon- to improve
machinability and reduce chances of defects in casting). Before transferring the molten
metal into pouring ladle at 15000
c, sample melt is poured into Carbon Equivalent Meter
cup, in order to check Carbon and Silicon content. It must be within prescribed limits.
2. Sand Preparation:
Mainly Kheda and Jhagadiya sands are used as silica sand. For the cores, oil is added as
binders and mulled properly to obtain thorough and homogeneous mixture called core
sand. Cores are made manually using this sand and are allowed to set for 8 hours.
Generally, cores required tomorrow are made a day before. Previously, they were using
Molasses as binder; there core backing i.e. heating was necessary. Molding sand has
totally different composition of ingredients as compared to core sand. It uses reclaimed
sand and for one lot 15 kg of bentonite powder (to improve GCS), 1 kg of coal dust
powder (to improve gas formation) and 20 liters of water are added and the mixture is
mulled. The molding sand is conveyed to the molding machines via conveyor-belt
system.
3. Mold Making & Core setting:
Here, molding sand is rammed either manually or by machines into the molding boxes
depending upon the sizes of the castings. Machine rammers are using vibrations and
squeezing action for this purpose. Pin lifting mechanism is incorporated in the machines.
Sometimes, mold heating is also done to remove excess moisture from it. Generally, cope
part is molded with gating and riser system and venting is also provided. Cores and molds
of larger castings are painted to reduce chances of defects in castings. During this phase,
core is assembled with the molding boxes and mold is made available ready for pouring.
Mold and core hardness are frequently checked during the operation.
4. Pouring:
The ready molds are transferred to the pouring area and molten metal is poured in it from
the tilting type ladle which runs with the help of overhead crane. Pouring rate is
controlled by the operator himself. Pouring ladle also has refractory brick lining to
minimize heat losses. After completely filling the mold, riser and sprue openings are
covered with the sand to minimize heat losses.
5. Fettling & Knockout:
After the solidification of the casting, the mold and core is broken at knockout machine
with the help of vibrations. After this the sprue, runners and risers are separated out of the
casting and the sand of the broken mold is sent to the reclamation unit. In reclamation,
12. 12
metallic particles and other impurities are separated out from the sand and the sand is
made useful again. Casting is then shot blasted so that clean metal surface exposes. Any
indication of defect appears at this stage. Then, casting is sent for grinding and other
operations either of quality check or of machining.
6. Sand Testing:
The most important phase of casting is testing the properties of the molding and core
sands to ensure desired properties in them. Sand samples are tested frequently in a day
i.e. 8-10 times a day. Sand is tested for compactibility, permeability, green compressive
strength, active clay content, moisture content, etc. Though it seems very simple but any
wrong decision during sand testing leads to major failure in the output, as sand is the
heart of sand casting processes. Fig. 5.2 (b) shows all these steps as flow diagram.
Fig. 5.2 (a) Steps Involved in Casting Process
7. Spectroscopy:
The Company has facility of checking various compositional elements of the cast metal.
The equipment used for this purpose is called SPECTRO METER. It uses spark produced
by high pressure Argon gas for the checking. Within 2-3 minutes, proportion of different
21 elements is known. Spectometer is available at HIMSONS CAST premises.
Spectrometer is shown in fig. 5.2 (b).
Fig. 5.2 (b) Spectrometer
13. 13
CHAPTER: 6 CASTING DEFECTS
6.1 TYPES OF DEFECTS
Fig. 6.1 shows Classification of Casting Defects based on Conformance Criteria.
Fig. 6.1 Classification of Casting Defects based on Conformance Criteria
Courtesy of efoundry.iitb.ac.in
6.2 VARIOUS CASTING DEFECTS & THEIR CAUSES
1. Flash:
This defect forms thin protrusion of metal at the parting line of mold on the castings.
This is due to improper closure of the mold boxes i.e. insufficient clamping force on
the cope and drag. This defect always increases rework on the castings. It is shown in
fig. 6.2 (a).
2. Mismatch:
Due to incorrect closure of the mold boxes, another defect appears called mismatch.
Here either cope or drag shifts along parting line so casting is rejected. Sometimes
shifting of the patterns during molding causes this defect. It is shown in fig. 6.2 (b).
3. Cold shut:
It is caused when two streams of metal which are too cold meet but do not fuse
together. The causes of this defect are incorrect design of casting, gating system and
riser as well as incorrect temperature of the melt. Generally, this defect can be
inspected visually as it happens on the surface of the castings. It is shown in fig. 6.2
(c).
4. Misrun:
If the mold cavity is partially filled due to rapid solidification at thinner sections,
defect called misrun takes place. If the casting has abrupt thickness changes or design
of gating and risering systems are incorrect then this defect is predominant. It is
shown in fig. 6.2 (d).
14. 14
5. Inclusions:
Inclusions are any foreign materials present in the cast metal. These may be in the
form of oxides, slag, dirt, sand or nails. Common sources of these inclusions are
impurities with the molten metal, sand and dirt from the mold not properly cleaned,
break away sand from the mold, core or gating system, gas from the metal and
foreign items picked on the mold cavity while handling. Inclusions are reduced by
using correct grade of molding sand and proper ramming of it.
6. Blow holes:
It is often observed and its causes are the entrapment of gases and air within the
solidifying casting. Probable causes to this are poor mold venting, excessive binder in
the core and mold, less permeable molding sand (fine sand), fast pouring rate,
incorrect gating system design (turbulence), etc. It is located either internally or
beneath the surface (subsurface), so it can be detected by RADIOGRAPHY in which
it appears as DARK SPOT. It is shown in fig. 6.2 (e).
7. Gas porosity:
This also occurs due to gas entrapment. But the difference between Blow holes & Gas
porosity lies within their size. Gas porosity is small in size and is seen in a group of
small cavities internally, whereas blow holes are relatively larger in size. Causes for
this defect are same as that for blow holes. It can be detected by RADIOGRAPHY in
which it appears as cluster. It is shown in fig. 6.2 (f).
8. Shrinkage porosity:
It is the most frequently occurring defect. The reason behind this is the solidification
shrinkage that takes place during the solidification process. However, it can be
eliminated by proper design and placement of riser or feeder. More complex castings
need more than one feeder at the locations where hot spots are generated. Size of
shrinkage porosity is large relatively so it is often called shrinkage cavity. Distinction
between shrinkage and gas porosity is that the shrinkage porosity has rough surface
while gas porosity has smooth surface. This defect also occurs internally, generally
near the hot spot. So, it can be detected by RADIOGRAPHY. Shrinkage Cavity is
shown in fig. 6.2 (g).
9. Shrinkage Related Other Defects:
If shrinkage occurs at the centre line of the section, then it is centre line shrinkage.
If shrinkage occurs at the corner of the casting, then it is corner shrinkage.
Pipe is the only defect which is DESIRABLE. It should occur in the feeders to
ensure that feeder has successfully performed its function. It is shown in fig. 6.2 (h).
10. Hot tears or Cold Cracks:
Hot tears are irregular internal or external cracks occurring immediately after the
metals have solidified. Hot tears occur on poorly designed castings having abrupt
section changes or having no proper fillets or corner radii, wrongly placed chills. Hot
tears are also caused due to poor collapsibility of the cores. If the core does not
collapse when the casting is contracting over it, stress will be set up in the casting
15. 15
which leads to its failure. If sufficient time is not given to the casting for solidifying
and if one starts shake out operation then also chances of having hot tears increase.
Hot tears can be reduced by improved design of casting, proper directional
solidification, uniform cooling rates, correct shakeout temperature and control of
mold hardness. It is shown in fig. 6.2 (i).
11. Distortion:
This defect occurs especially when very long thin castings are cast. It is shown in fig.
6.2 (j).
(a) (b) (c)
(d) (e) (f)
(g) (h)
17. 17
CHAPTER: 7 NEED OF GATING & FEEDING SYSTEMS
7.1 INTRODUCTION TO GATING SYSTEM
It is a passageway for molten metal.
It is needed for Proper filling of mold cavity to ensure good quality casting.
7.2 ELEMENTS OF GATING SYSTEM
All the elements of Gating System can be easily visualize from the fig. 7.2.
It comprises of Pouring Cup or Pouring Basin, Sprue, Sprue Well, Runners, Ingates
and Runner Extensions.
Fig. 7.2 Elements of Gating System
7.3 NEED OF GATING SYSTEM
To regulate the flow of molten metal into mold cavity
To ensure the complete filling of mold cavity before freezing
To minimize the turbulent flow which can cause absorption of gasses, oxidation of
the metal and erosion of mold surfaces
To promote temperature gradients favorable for proper directional solidification
To incorporate traps for separating the inclusions from the molten metal
7.4 INTRODUCTION & NEED OF FEEDING SYSTEM
It includes risers or feeders, feed-aids & neck.
It is considered separately because it has different function than Gating system.
Risers are added reservoirs designed to feed liquid metal to the solidifying casting as
a means for compensating for solidification shrinkage.
This is only possible if riser solidifies at last.
Riser is located near the section that will solidify (i.e. at the thickest section) at last in
order to promote directional solidification.
18. 18
In other words, feeder shifts the HOT SPOT from the casting into itself.
Function of Riser is shown in fig. 7.4.
Without Riser With Riser
Fig. 7.4 Function of Riser
Courtesy of efoundry.iitb.ac.in
19. 19
CHAPTER: 8 DESIGN OF GATING & FEEDING SYSTEMS
8.1 TYPES OF GATING SYSTEM
According to Orientation
Horizontal & Vertical; fig. 8.1 (a) to (e)
According to Position
Top, Bottom & Parting Line; fig. 8.1 (f), (g), (h)
According to Number of Gates
Single Gate & Multiple Gates
According to Gating Ratio
Pressurized & Non-Pressurized
(a) (b)
(c) (d) (e)
(f) (g) (h)
Fig. 8.1 Types of Gating Systems
20. 20
8.2 GATING SYSTEM DESIGN
1. Pouring Cup & Pouring Basin
Any one of these is necessary so as to direct the flow of the molten metal from
pouring ladle to the mold cavity.
Pouring Basin, in addition to this, provides better slag trap and smooth cavity
filling properties i.e. reduces turbulence and vortexing at the sprue entrance.
Pouring cup is funnel shaped cup at the top of the sprue.
2. Sprue
It is tapered (and not parallel which causes higher mold erosion) with its bigger
end at the top to receive the liquid metal. The smaller end is connected to the
runner.
It will thus allow continuous feeding of molten metal into mold cavity.
Round sprue has minimum surface exposed to cooling and offers lowest
resistance to flow of metal.
There is less turbulence in a rectangular sprue.
3. Gate
It is a channel which connects runner with the mold cavity. Runner connects sprue
base with the gates.
Molten metal enters the mold cavity through gates.
It should feed liquid metal to the casting at a rate consistent with rate of
solidification.
A small gate is used for casting which solidifies slowly and vice-versa. More than
one gate may be used to feed a fast freezing casting.
A gate should not have sharp edges.
There are varieties of Top, Bottom & Parting line gates which are used in
practice.
All these elements of gating system are shown in fig. 8.2 (a).
Fig. 8.2 (a) Elements of Gating System
21. 21
4. Governing Equations
First equation is Reynold’s equation which gives the value of a dimensionless
number which indicates whether flow of fluid is turbulent or not. Generally,
turbulent flow occurs if the value of Reynold’s number exceeds the value 4000.
𝑅𝑒 =
𝜌𝑉𝐷
𝜇
Continuity equation of fluids is very important as it is used for designing the
sprue. This law holds good for only those ducts, tubes or channels which run full.
𝑄 = 𝐴1 𝑉1 = 𝐴2 𝑉2
Bernoulli’s equation is also very useful in the gating system design. This is
because it is used to find out the velocity of the molten metal at sprue base, given
the height of the sprue.
𝑉1
2
2𝑔
+ 1 +
𝑃1
𝜌𝑔
=
𝑉2
2
2𝑔
+ 2 +
𝑃2
𝜌𝑔
Note that this equation is written neglecting the loss of head during the flow.
By manipulating this equation, we get
𝑉2 = 2𝑔 𝑠
Another important equation is Darcy- Weisbach equation. It is basically an
equation of loss of head during fluid flow through pipes due to friction.
𝑓 =
𝑓𝐿𝑉2
2𝑔𝐷
Choke: It is that part of gating system which possesses smallest cross- sectional
area. In pressurized gating system, gate serves as choke. So, very high velocity
will lead to excessive mold erosion and turbulence in the fluid flow.
Area of the Choke is calculated by using modified form of Bernoulli’s equation.
𝐶𝐴 =
𝑊
𝑐𝜌𝑡 2𝑔𝐻
22. 22
Pouring Time: Selection of optimum pouring time is major problem in foundries.
Some empirical formulas are setup to find the pouring time for a particular size &
shape of the casting. Here, only Grey Cast Iron is taken into consideration.
For Castings weighing more than 1000 lbs
𝑃𝑜𝑢𝑟𝑖𝑛𝑔 𝑡𝑖𝑚𝑒 = 𝐾 0.95 +
𝑇
0.853
𝑤
3
𝑠𝑒𝑐𝑜𝑛𝑑𝑠
For Castings weighing less than 1000 lbs
𝑃𝑜𝑢𝑟𝑖𝑛𝑔 𝑡𝑖𝑚𝑒 = 𝐾 0.95 +
𝑇
0.853
𝑤 𝑠𝑒𝑐𝑜𝑛𝑑𝑠
Where K= Fluidity factor
=
Fluidity of specific iron
40
8.3 FEEDING SYSTEM
Feeding system includes Risers or Feeders, Feed-aids & Neck connection.
Risers or Feeders are used to compensate the liquid metal for Liquid to Solid
shrinkage.
It is extremely useful to avoid the hot spots and hence shrinkage defects in the
castings.
Always feeders must solidify at last. This is only possible if Modulus of the feeder is
larger than Modulus of the castings.
Feed-aids include Sleeves, Chills, Padding, Fins, Exothermic materials, etc.
These are extensively used in foundries as they improve the yield by improving the
effectiveness of the risers. Fig. 8.3 (a) & (b) shows Chills & Sleeves respectively.
Neck is the connection between the Riser and Casting. Typical figure for this is
shown as fig. 8.3 (c).
(a) Chills (b) Sleeves
Courtesy of efoundry.iitb.ac.in
23. 23
(c) Various Neck Connections
Fig. 8.3 Feed aids & Neck Connections
8.4 METHODS OF RISER DESIGN
A. Chvorinov’s Rule:
It states that freezing time is proportional to (V/A)2
. It means if metal in riser has
to remain liquid for a longer time, V/A should be large or A/V should be small.
According to this rule, riser should be cylindrical (round) rather than square or
rectangular of equivalent mass.
Spherical risers are the best by this criteria but due to difficulties in molding,
feeding and fettling, they are not practicable.
t freezing or t solidification = k (Volume/Surface Area)2
According to this rule,
ts sphere > ts cylinder > ts bar > ts plate
B. Modulus Method:
Modulus is nothing but ratio of Volume and Surface area.
Empirically, M feeder ≥ 1.2 M casting
After this, appropriate h/d ratio is assumed & dimensions of riser are calculated.
C. Caine’s Method:
It is based on an experimentally determined hyperbolic relationship between
relative volumes and relative solidification rates of riser and casting to produce
shrinkage free castings.
24. 24
Reason for taking Surface area to Volume ratio is that, surface area represents the
heat dissipation and the volume (within which mass of liquid is present), represents
quantity of heat.
Relative freezing time
Quantity of metal required
for compensating shrinkage
So, Caine’s Equation:
Where
a= freezing chara. Constant
b= liquid- solid shrinkage
c= relative freezing rate of
riser & casting
Caine’s curve is basically a hyperbola having specific values of constants a, b and
c as discussed above. It is shown in fig. 8.4 (a).
Fig. 8.4 (a) Caine’s Curve
01-x
ratiofreezingxwhere
1,or x1
V
A
V
A
V
A
V
A
riser
casting
risercasting
0
,
V
V
c
r
b)(y
ion ratios contractwhere, y i
bb or y
c
by
a
x
abyx
byx
)(
))(1(
0))(1(
25. 25
D. NRL (Naval Research Laboratory) Method:
A further and simplified development of the Caine’s approach was that of Bishop,
who used the concept of a shape factor to replace the surface area to volume ratio
used in the earlier relationship.
The shape factor
where L, W and T are the length, breadth and thickness of the section concerned.
General Procedure:
I. Calculate shape factor for critical section.
II. Derive the value of V riser/ V casting from the NRL graph as shown in fig. 8.4
(b).
III. With known V casting, V riser can be found out.
IV. Various alternative h/d combinations are selected.
Fig. 8.4 (b) NRL Graph
T
WL
S
26. 26
CHAPTER: 9 WORK FLOW AS PER METHODOLOGY
9.1 Study of Casting Defects in Cast Parts:
Detailed study of various casting defects is completed (As described in Chapter 6).
9.2 Analyzing Probable Causes of Frequently Occurring Defects:
Detailed study of probable causes of various casting defects is completed (As
described in Chapter 6).
9.3 Analyzing Rejection Rates Due to Defects for Casting:
Monthly rejection of concerned casting, EP20, is shown in Chapter 2 (Fig. 2.1 & 2.2).
Contribution of various defects to rejection rate of EP20 is shown in fig. 9.3.
Fig. 9.3 Analysis of Rejection Rate
Mold & Core surfaces of EP20 casting are painted with thinner.
Because of this, surface of the castings become smooth and chances of getting Blow
holes also reduces.
From the fig. 9.3, it is clear that Shrinkage is major problem.
Frequency of rejection due to cold shut is high because casting has very intricate
shape & may be due to improper gating & feeding system design.
9.4 Solid Modeling of Casting Using Pro-E:
Human Can’t Survive Without O2 , likewise any Casting Simulation Software Can’t
Proceed Without Solid Model of the Casting.
Also, the file format of the solid model is universal which is .STL (Fig. 9.4.1).
0
1
2
May '13 June '13 July '13 August '13
QtyRejected
Month
Shrinkage
Cold Shut
Crack
Mismatch
27. 27
Some of the software need solid models along with Gating & Feeding systems & core
assembled mold box modeled with it as input.
Few advanced software help solving this difficulty. They assist in designing Gating &
Feeding Systems based on some criteria. Also they automatically recognize features
to create core automatically.
Another compulsion is that we must use 3D solid model & not either wire frame
model or surface model.
This is because in wire frame or surface model mass and volumetric properties of cast
metal cannot be known.
Any casting has basically Three types of features:
1. Base Features:
They define overall shape of casting.
Its shape can be rectangular block, cylinder, sphere, spiral, L bracket, etc.
2. Local Feature:
It can be Depression or Protrusion on the base feature.
Ex: Hole, Pocket, Slot, Boss, Rib, etc.
3. Connecting or Modifying Feature:
They are used to connect two or more features.
Ex: Taper, Chamfer, Fillet, Draft, etc.
Any Casting can be modeled by using various features, as mentioned above, available
in various modeling software.
There are varieties of software available in market for solid modeling but we adopted
Pro-E.
PRO-E is basically Parametric software.
So, using Pro-E 5.0, we have modeled EP20 casting from the photographs available
to us. Detailed drawing was not given to us because of privacy policy.
Fig. 9.4 shows the development of solid model of EP20 casting in different phases.
Fig. 9.4 (a) Phase 1
29. 29
Fig. 9.4 (d) Phase 4
Fig. 9.4 Various Phases of Solid Modeling
Fig. 9.4.1 STL file of EP20 part
30. 30
9.5 Manual Gating System & Riser Designs for Casting:
Methods of designing various elements of Gating and Feeding Systems are very well
understood and are explained in Chapter 8.
GATING SYSTEM:
Essential Input Parameters
Density of Gray Cast Iron, ρ = 7.1 gm/cm3
Average section thickness, T = 15 mm
Fluidity of Gray Cast Iron = 30 inch
Weight of casting, W = 240 kg
Nozzle coefficient, c = 0.9
Gating Ratio = 1:4:4
Effective Head, H = 462.5 mm
Cross section of runner and ingate = Rectangular
Ratio of height to width for runner = 1:2
Ratio of height to width for ingate = 1:2
No. of ingates = 4
Calculated Parameters (Refer page 21 & 22, chapter 8 for governing equations)
Pouring time, t = 28.328 seconds
Choke area, A = 440.138 mm2
Diameter at top of the pouring cup = 150 mm
Diameter at top of the downsprue = 90 mm
Diameter at sprue base = 75 mm
Area of sprue base = 4417.86 mm2
Area of runner and gates = 1104.47 mm2
Dimensions of runner: height = 23.5 mm & width = 47 mm
Area of one gate = 276.12 mm2
Dimensions of gate: height = 11.75 mm & width = 23.5 mm
Various elements of gating system are shown in the form of 3d models in fig.
9.5.1. Note that these models are based on designed values.
(a) (b) (c)
Fig. 9.5.1 Models of Various Elements of Gating System
31. 31
FEEDING SYSTEM:
Essential Input Parameters
Volume of casting, V = 33.80 X 106
mm3
Surface area of casting, A = 3.45 X 106
mm2
Existing method of Feeding at Fine Cast
No. of Feeders = 10
Modulus of casting, MC = 9.8 or approx. 10
Modulus of Riser, MR = 1.25MC = 12.5
Cross section of riser used in existing method is shown in fig. 9.5.2.
Fig. 9.5.2 Cross section of existing riser
Proposed method
No. of feeders = 2 or 4
Cross section of riser = Cylindrical
May or may not have Neck
General configuration of the riser for sign convension is as per fig. 9.5.3.
Fig. 9.5.3 Sign convention for proposed riser geometry
32. 32
9.6 Study of the Casting Simulation Software:
Simulation is the process of imitating a real phenomenon using a set of mathematical
equations implemented in a computer program. It is used to Predict or Prevent the
process growth.
Metal casting is subject to an almost infinite number of influences. A few major
factors related to casting geometry, material, and process, are listed below:
1. Casting Geometry:
Part features, including convex regions (external corners), concave regions
(internal corners), cored holes, pockets, bosses, ribs, and various junctions (2D
and 3D), all of which affect the flow and solidification of metal.
Layout in mould, including number of cavities, and their relative location (inter-
cavity gap and cavity-to-wall gap), which affect the amount of heat absorbed by
the mould.
Feed-aids, including number, shape, size and location of insulating sleeves and
covers, chills (external or internal), and padding, which affect the rate of heat
transfer from the relevant portion of the mould.
2. Casting material:
Thermo-physical properties of the metal/alloy, including its density, specific heat,
thermal conductivity, latent heat, volumetric contraction during solidification,
coefficient of linear expansion, viscosity and surface tension.
Thermo-physical properties of mold, core and feed-aid materials, including
density, specific heat, thermal conductivity, coefficient of linear expansion.
Changes in properties with composition and temperature, relevant transformations
(grain shape, structure, distribution), and resultant mechanical properties.
3. Process:
Turbulent flow of molten metal in the mould with splashing, stream separation
and rejoining, mould erosion, gas generation and escape through venting, coupled
with heat transfer leading to reduced fluidity.
Casting solidification with multiple modes of heat transfer (conduction,
convection and radiation) involving non-uniform transient heat transfer rate from
metal to mould, including latent heat liberation and moving liquid-solid boundary.
Solid state cooling with changes in mould shape and dimensions, leading to
residual stresses and/or deformation in cast part, and different grain structures
affecting the final properties in different regions.
Process parameters including actual composition of metal/alloy, mould size,
mould compaction, mould coating, mould temperature, pouring temperature and
rate, mould cooling, shake out.
It is no surprise that a complete and physically accurate simulation of metal casting
process is very difficult
33. 33
The key to developing a practically useful simulation program is to determine which
the most important factors are.
Some of the well-known casting simulation programs currently available to foundry
engineers are AutoCAST, CastCAE, Castflow, MAGMAsoft, MAVIS, Procast,
Sutcast, SOLIDcast, etc.
Use of simulation software may result in Quality enhancement, Yield improvement or
Rapid development of newer castings.
Factors Affecting Accuracy of Simulation:
1. Assumptions of mathematical model & model definition
2. Discretization or Pre-processing
3. Approximations during analysis (IHTC, material prop.)
4. Post-processing or Interpretation
Simulation Process Sequence:
1. Formulate the physics of process in PDE form
2. Discretize the geometry(FEM, FDM, FVM)
3. Write equations for all the nodes & generate matrices
4. Apply boundary conditions (IHTC, Feed aids, etc)
5. Solve the matrices
6. Present the results calculated
Disadvantages of Numerical Methods:
− In most of the software, numerical methods like FEM, FDM, FVM, BEM have
been used.
− Here, discretization is done & unsteady state heat transfer equations are applied
on them periodically.
− Hence, this method is time consuming. Also, input values mean a lot to this
method.
− This has been rectified by incorporating the geometry based method called MVM
(Modulus Vector Method).
Comparison between various methods:
− In general, FEM is preferred as it allows a wider choice of element shapes and
better accuracy. It requires manual effort to correctly generate element mesh.
− FDM & FVM based simulation programs are faster and easier to execute but
elements are cubic & brick type only.
34. 34
MVM (Modulus Vector Method):
− Method is also called GVM (Gradient Vector Method) or VEM (Vector Element
Method).
− It will show the location of hot spot in the casting without much computation.
− This method is better understood from the fig. 9.6 (a) & (b).
(a) (b)
Fig. 9.6 Modulus Vector Method
Courtesy of efoundry.iitb.ac.in
− A unit sphere is constructed around the point Pi and the surface of sphere is
divided into n number of equal regular polygons.
− Each polygon is defined by a set of bounding points Pijk, lying on the sphere.
− Let, Cijk be the centroid of the above polygon, and β be the solid angle subtended
by the polygon at the centre of the sphere Pi.
− Rays starting from Pi and passing through Pijk are projected to compute their
intersections P’ijk with the surface of the casting model.
− Each set of these points are connected to Pi to form pyramidal segments for each
elements.
− The modulus vector for any segment is defined as
Where V and A are volume and area of base of any pyramidal segment
respectively.
− In case of 2D geometry, the equation reduces to
Where A and S are Area and length of sector of any triangular segment
respectively.
− The direction and relative magnitude of the largest temperature gradient at Pi is
given by the resultant of the modulus vector for all the segments.
35. 35
− The direction of the largest thermal gradient at any point inside the casting will
show the path of molten metal feeding and hence the location of HOT SPOT.
Capabilities of Simulation Software:
− Solidification Simulation
− Flow Simulation (Marker & Cell method, Volume of fluid method)
− Coupled Simulation (Thermal-Flow-Stress Simulation, Thermal-Flow-
Microstructure Simulation)
Critical Inputs for Solidification Simulation:
− Part & Tooling Geometry
− Material properties
− Mesh type & size
− Boundary conditions
− Metallurgical models (Shrinkage, microstructure)
Critical Inputs for Mold Filling Simulation:
Same as above except that instead of metallurgical models, we have to feed Flow
models (Cold shut, air/gas entrapment, inclusion).
Examples of simulation by Software:
Solidification Simulation : Fig. 9.6.1 (a), (b) & (c)
(a) Hot spot (b) Temperature Distribution (c) Feed paths
Fig. 9.6.1 Examples of Solidification Simulation
Courtesy of efoundry.iitb.ac.in
36. 36
Mold Filling and Coupled Simulation : Fig. 9.6.2 (a), (b) & (c)
(a) Fill Time (b) Velocity (c) Solidification Time
Fig. 9.6.2 Examples of Mold Filling & Coupled Simulation
Courtesy of efoundry.iitb.ac.in
Trial Performed on the Online Software Resource (E-foundry):
(a) (b) (c)
Fig. 9.6.3 Trials for Result Interpretation
Courtesy of efoundry.iitb.ac.in
9.7 Solidification Simulation for Proposed Method & its Optimization:
Need of changing the existing method for EP20 can be visualized from the results of
simulation of that existing method.
− Fig. 9.7.1 (Page 37) shows the complete assembly of EP20 casting along with
existing method used in Fine Cast.
− Temperature scale used for the results is as per fig. 9.7 (Page 36).
− After simulating this whole assembly, the result obtained is as shown in fig. 9.7.2
(Page 37).
AMBIENT 12000
C
Fig. 9.7 Temperature scale
37. 37
Fig. 9.7.1 Existing method assembly for EP20
Fig. 9.7.2 Simulation result of existing method for EP20
38. 38
− So, it can be concluded that the risers put on the casting do not serve their
function of moving the hot spot from casting within them.
− Instead, there are chances of having fast freezing of risers themselves leading to
major defects in solidified casting.
As stated earlier, modified method has cylindrical risers with or without neck
provision. (Refer fig. 9.5.3)
For the purpose of optimizing the method in terms of chances of defects and casting
yield, large numbers of iterations are performed using simulation.
Firstly, location/s of hot spot/s is/are found out by performing simulation on the
model of the part without gating and feeding systems. The outcome to this is shown
in fig. 9.7.3.
Fig. 9.7.3 Simulation result of EP20 part model (Without Gating & Risers)
The temperature distribution shown in every result can be interpreted in the context of
fig. 9.7 (page 36).
So, there are two large hot spots at two short side ends and small hot spots near the
hole features.
Iterations can be performed by keeping these locations in mind and by varying the
dimensions of the risers.
Note that the Gating system is chosen which is the existing only. No change in Gating
system is incorporated as solidification simulation does not count for that.
The simulation is performed by considering Fine mesh size of molding sand.
39. 39
1. First modified method includes two no. of risers, both having d1= 50 mm, h1= 250
mm (Refer fig. 9.5.3, page 31) and no neck connection. The risers are placed above
two large hot spots. The simulation results, fig. 9.7.4, clearly show no sign of
improvement in terms of shifting of hot spots.
Fig. 9.7.4 Iteration-1 result
2. Second modified method includes two no. of risers, both having d1= 60 mm, h1=
250 mm (Refer fig. 9.5.3, page 31) and no neck connection. The risers are placed
above two large hot spots. Fig. 9.7.5 (page 40) shows that there is no significant
improvement even in this method.
3. Third modification includes two no. of risers, both having d1= 100 mm, h1= 220 mm
and have neck connection with d2= 60 mm and h2= 30 mm (Refer fig. 9.5.3, page 31).
The risers are placed above two large hot spots. Fig. 9.7.6 (page 40) shows that there
is some degree of improvement in this method.
4. Fourth modification incorporates four no. of risers; two of which have d1= 120 mm
and h1= 220 mm, placed above large hot spots, both having neck connection with d2=
60 mm and h2= 30 mm (Refer fig. 9.5.3, page 31), also there is fillet of 10 mm at
neck-riser connection. Other two risers are placed on smaller hot spots and have d1=
60 mm and h1= 250 mm, which do not have neck. This configuration shows
significant improvement in results over previous methods. See fig. 9.7.7 (page 41).
This is not good because of fillet and 4 no. of risers.
41. 41
Fig. 9.7.7 Iteration-4 result
5. Fifth trial includes two no. of risers, both having d1= 130 mm, h1= 220 mm and have
neck connection with d2= 70 mm and h2= 30 mm (Refer fig. 9.5.3, page 31). The
risers are placed above two large hot spots. Fig. 9.7.8 (Page 42) shows that there is
better improvement in this method in terms of no. of risers and hot spot intensity.
6. Sixth trial is performed using two no. of risers, one having d1= 140 mm, h1= 230
mm, d2= 70 mm and h2= 20 mm which is placed on larger hole side. Other riser has
d1= 140 mm, h1= 230 mm, d2= 60 mm and h2= 20 mm which is placed on smaller
hole side. Fig. 9.7.9 (Page 42) shows that there is better improvement in this iteration
in terms of hot spot intensity.
7. Seventh iteration has two no. of risers, one having d1= 150 mm, h1= 230 mm, d2= 70
mm and h2= 20 mm which is placed on larger hole side. Other riser has d1= 150 mm,
h1= 230 mm, d2= 60 mm and h2= 20 mm which is placed on smaller hole side. Fig.
9.7.10 (Page 43) shows that there is large drop in hot spot intensity.
8. Eighth modification also has two no. of risers, one having d1= 160 mm, h1= 230
mm, d2= 70 mm and h2= 20 mm which is placed on larger hole side. Other riser has
d1= 160 mm, h1= 230 mm, d2= 60 mm and h2= 20 mm which is placed on smaller
hole side. Fig. 9.7.11 (Page 43) shows the result of simulation which is even better
than previous trial.
44. 44
9. Ninth modification also has two no. of risers, one having d1= 175 mm, h1= 230 mm,
d2= 70 mm and h2= 20 mm which is placed on larger hole side. Other riser has d1=
175 mm, h1= 230 mm, d2= 60 mm and h2= 20 mm which is placed on smaller hole
side. Fig. 9.7.12 shows the result of simulation which is slightly better than previous
trial result.
Fig. 9.7.12 Iteration-9 result
10. Tenth trial has two no. of risers, one having d1= 200 mm, h1= 230 mm, d2= 70 mm
and h2= 20 mm which is placed on larger hole side. Other riser has d1= 200 mm, h1=
230 mm, d2= 60 mm and h2= 20 mm which is placed on smaller hole side. Fig. 9.7.13
(page 45) shows the result of simulation which almost nullifies effect of hot spot and
completely shifts the hot spots within risers.
For all these trials, excessive use of the foundry website named efoundry.iitb.ac.in ,
is made.
45. 45
Fig. 9.7.13 Iteration-10 result
After carefully observing all these simulated results, one has to optimize between
level of defect allowed and casting yield.
It is clear that by adopting 9th
or 10th
iterations, chances of defect (particularly
shrinkage) reduce drastically with large reduction in casting yield.
If customer allows some percentage of shrinkage defects then accordingly specific
iteration is chosen for actual casting process.
If the customers provide excessive tight tolerances for defects then the overall cost of
production increases due to increased foundry efforts and large drop of casting yield
because of selecting either 9th
or 10th
proposed method.
In this way simulation provides powerful tool to method engineers to optimize the
gating and feeding system through virtual and less time taking simulation trials.
46. 46
9.8 Comment on other frequently occurring defects:
Let’s again visit the temperature distribution of EP20 casting alone as shown in fig.
9.8.1.
Fig. 9.8.1 Simulation result of EP20
The solution for reducing or eliminating the HOT SPOTS i.e. WHITE LOCATIONS is
already obtained by optimizing the riser design and locations (Refer section 9.7).
The COLD SPOTS i.e. BLUE LOCATIONS indicates probable locations of occurring
the COLD SHUT. This is because; the blue regions are early freezing regions (fig. 9.7
and page 36). Due to large temperature gradients, chances of induced residual stresses
increase which may lead to cracking.
− The problem of COLD SPOT can be solved by performing very complex FLOW
SIMULATION process.
− Other way of reducing or eliminating these problems is to analyze the past records
to find out locations of these defects in previously cast EP20.
− After knowing these locations, appropriate amount of PADDING at appropriate
locations so as to minimize temperature difference.
− Padding may be BASE METAL type or FOREIGN MATERIAL type.
− This method is simply described as increasing the thickness of critical sections of
the casting.
Sometimes MISMATCH also occurs in the castings (Refer fig. 9.3 and page 26). This
cannot be eliminated by any simulation software. This is because of the nature of
defect i.e. only because of FOUNDRY PRACTICE. It has large dependence on
operator’s accuracy in clamping mold boxes and location accuracy of pattern plates
on molding machines.
47. 47
CONCLUSION
EP 20 Casting produced by FINE CAST foundry fails to provide the soundness
frequently due to defects such as Shrinkage, Cold shut, Crack and Mismatch.
Out of these defects, Shrinkage, Cold shut and Crack can be reduced by optimizing the
design of Gating and Feeding systems. Mismatch is the defect occurring due to operator
error or pattern plate positioning error and cannot be reduced or eliminated with an aid of
simulation software.
Since manual iterations for optimizing the design require huge amount of time and
money, it is customary to use Casting Simulation Software for this purpose.
Simulation software gives the results for solidification simulation, flow simulation as
well as coupled simulation by providing required inputs.
Solidification simulation gives the locations of hot spots in the solidified casting and feed
paths thus helps in determining riser/feeder location and geometry.
We have performed solidification simulation trials result of whose can be visualized by
temperature distribution and probable locations of occurrence of shrinkage can be known
and the problem can be rectified using proper rectification.
Flow simulation gives ideas about mold filling by which solidification time and mold
filling time can be known. Also, flow related defects can be predicted and may be
prevented. Flow related defects are cold shut, cracking, etc.
In short, simulation technique aims at improving casting yield as well as reduces
rejections which ultimately lead to the higher profits.
48. 48
REFERENCES
Research and Review Papers
1. K.D. Carlson, R.A. Hardin, Shouzhu Ou & C. Beckermann, “Development of new feeding
distance rules using casting simulation: Part 1. Methodology”, Metallurgical and
materials transactions B; vol 33 B, October 2002-731
2. K.D. Carlson, R.A. Hardin, Shouzhu Ou & C. Beckermann, “Development of new feeding
distance rules using casting simulation: Part 2. The new rules”, Metallurgical and
materials transactions B; vol 33 B, October 2002-741
3. B. Ravi, R.C. Creese & D. Ramesh, “Design for casting- A new paradigm for preventing
potential problems”, Transactions of the American Foundry Society, 107, 1999
4. K. Singh, P.K. Reddy, D. Joshi, K. Subburaj & B. Ravi, “3D junctions in castings:
Simulation based DFM Analysis and Guidelines”, INAE- ICAMT 2008, Feb. 6-8, 2008
5. B.G. Thomas, “Issues in thermal-mechanical modeling of casting processes”, Iron &
Steel inst. Of Japan International, Vol.35, No. 6, 1995,pp.737-743
6. Mark Jolly, “Casting Simulation: How well do reality and virtual casting match? State of
the art review”, Int. J. Cast Metals Res., 2002, 14, 303-313
7. Z. Guo, N. Saunders, A.P. Miodownik & J.-Ph. Schille’, “Modeling of materials
properties and behavior critical to casting simulation”, Materials science and
engineering A 413-414 (2005) 465-469
8. Dr. B. Ravi, “Casting Simulation and Optimization: Benefits, Bottlenecks, and best
Practices”, Tech. paper for Indian Foundry journal Jan. 2008 Special issue
9. Dr. B. Ravi, D. Joshi & K. Singh, “Part, Tooling and method optimization driven by
Castability analysis and cost model”, 68th
world foundry congress, Chennai, 7-10 feb.
2008
10. T.R. Vijayaram, S. Sulaiman, A.M.S. Hamouda & M.H.M. Ahmad, “Numerical
simulation of casting solidification in permanent metallic molds”, Journal of materials
processing technology 178 (2006) 29-33
11. Dr. B. Ravi, “Casting simulation- Best practices”, Trans. Of 58th
IFC, Ahmedabad
(2010)
12. B. Ravi & M.N. Srinivasan, “Feature recognition and analysis for molded components”
13. Dr. B. Ravi, “Computer aided casting method design, simulation and optimization”, Inst.
Of Indian Foundry men (Indore chapter), 13 march 2008
14. V.M. Gopinath, A. Venkatesan & A. Rajadurai, “Simulation of casting solidification and
its grain structure prediction using FEM”, Journal of materials processing technology
168 (2005) 10-15
15. B. Ravi & M.N. Srinivasan, “Casting solidification analysis by modulus vector method”,
Int. J. Cast metals Res. 1996, 9,1-7
16. K.S. Chan, K. Pericleous & M. Cross, “Numerical simulation of flows encountered
during mold filling”, Appl. Math. Modeling, 1991, vol. 15, nov./dec.
49. 49
Reference Books & Other Resources
17. R.A. Flinn, “Fundamentals of Metal Casting”, Adison-Wesley Publishing Company Inc.
18. R.W. Heine, C.R. Loper & P.C. Rosenthal, “Principles of Metal Casting”, Tata McGraw
Hill Education Pvt. Ltd.
19. Peter Beeley, “Foundry Technology”, Butterworth Heinemann Pub.
20. B. Ravi, “Metal Casting- Computer aided Design & Analysis”, PHI Learning Pvt. Ltd.
21. P.N. Rao, “Manufacturing Technology- Foundry, Forming and Welding”, Tata Mcgraw
Hill Education Pvt. Ltd.
22. O.P. Khanna, “A Textbook of Foundry Technology”, Dhanpat Rai Publications Pvt. Ltd.
23. Web Resource: efoundry.iitb.ac.in