Explain the functions of the different types of meristems found in pl.pdf
•
0 likes•2 views
Explain the functions of the different types of meristems found in plants. Be able to distinguish between secretory tissues. Solution In plants, meristems are resent broadly of three types namely: 1. Apical meristem 2. intercalary Meristem 3. Lateral meristem 1. APICAL MERISTEM This is present at the root and shoot apex of the plant and is actively dividing zone. Shoot apcal meristem causes plant to grow up and root apical meristem causes thr roots to grow down in the soil. Apical meristems keep dividing and result in the primary growth of plant and the tissues formed as their division as named as Protoderm and Procambium. 2. INTERCALARY MERISTEM Intercalary meristem is found between the mature tisues like nodes and internodes. It functions to regulate the regenration of Tissues when the leaves and grasses are grazed by herbivores. This meristem is found mainly in monocot plants. 3. LATERAL MERISTEM This type of meristems is developed late in the plant life cycle and thus it is also known as secondary meristem. It functions in the secondary growth of plant where plant grows in girth not in height. Cork cambium fascisular cambium and interfascicular cambium are types of lateral meristems..
Report
Share
Report
Share
Download to read offline
Recommended
Biljna tkiva
Plant tissues fall into two categories: meristematic and permanent tissues. Meristematic tissues, like apical and lateral meristems, allow for growth through cell division. Apical meristems cause primary growth in shoots and roots as cells divide and elongate. Permanent tissues, such as parenchyma, collenchyma, and sclerenchyma, take on mature forms to carry out functions like photosynthesis, storage, and structural support. Parenchyma is one of the most common permanent tissues found throughout plant organs.
Apical Meristem
Apical meristem, region of cells capable of division and growth in the root and shoot tips in plants. Apical meristems give rise to the primary plant body and are responsible for the extension of the roots and shoots. Unlike most animals, plants continue to grow throughout their entire life span because of the unlimited division of these and other meristems.
Meristematic tissue
1) Meristematic tissue contains undifferentiated cells that actively divide throughout a plant's life to form specialized structures like leaves, flowers, roots and shoots.
2) The tissue is usually found at root and shoot tips and helps increase plant length and girth.
3) Meristematic tissue is classified based on origin, development stage, position and function - including apical, intercalary and lateral meristems that contribute to height, internodal length and thickness.
Meristematic tissue
The document discusses plant tissues. It defines tissue as a group of organized cells with common origin, function and structure. There are three main types of tissues in plants: meristematic, permanent and specialized tissues. Meristematic tissue is made of actively dividing cells found in growing regions and gives rise to permanent tissues through cell differentiation. Permanent tissues include epidermis, ground and vascular tissues which make up the basic structure of plants. Specialized tissues are further classified into external and internal secretory tissues.
meristematictissue-740 (1).pd
The document discusses plant tissues. It defines tissue as a group of organized cells with common origin, function and structure. There are three main types of tissues in plants: meristematic, permanent and specialized tissues. Meristematic tissue is made of actively dividing cells found in growing regions and gives rise to permanent tissues through cell differentiation. Permanent tissues include epidermis, ground and vascular tissues which make up the basic structure of plants. Specialized tissues are further classified into external and internal secretory tissues.
Plant tissues final
This document provides information on plant tissues and the differences between monocot and dicot plants. It begins with an introduction to plant tissues, including meristematic and permanent tissues. It then describes the key tissues like epidermis, parenchyma, collenchyma, sclerenchyma and vascular tissues. Next, it highlights the differences between monocots and dicots with regards to their seed leaves, vascular bundles, flower parts, mature leaves and roots. It also provides microscopic images of monocot and dicot structures. The document concludes with information about practical training on plant identification which includes a list of drugs and their powder and tissue section microscopic analysis.
Plant tissues and its types (part I)
This document discusses meristematic tissue in plants. It begins by defining meristematic tissue as a group of cells that remain in a continuous state of division and growth. It then lists the key characteristics of meristematic cells, such as being immature, thin-walled, and having abundant cytoplasm and nuclei. The document goes on to explain that meristems allow for continuous growth throughout a plant's life, unlike in animals where growth stops once adult size is reached. It classifies meristems based on development stage, origin, position in the plant, and function. Apical, intercalary, and lateral meristems are described based on their position. The role of meristems in primary and secondary
Plant structure, growth, and reproduction by Campbell Biology 7th edition
Plants have organs composed of tissues and cells. The three basic plant organs are roots, stems, and leaves. Plants grow through cell division and elongation via apical and lateral meristems. Meristems allow plants to grow continuously, unlike animals. Flowering plants reproduce sexually through flowers containing modified leaves called sepals, petals, stamens, and carpels. Pollination allows fertilization and seed production, completing the plant life cycle.
Recommended
Biljna tkiva
Plant tissues fall into two categories: meristematic and permanent tissues. Meristematic tissues, like apical and lateral meristems, allow for growth through cell division. Apical meristems cause primary growth in shoots and roots as cells divide and elongate. Permanent tissues, such as parenchyma, collenchyma, and sclerenchyma, take on mature forms to carry out functions like photosynthesis, storage, and structural support. Parenchyma is one of the most common permanent tissues found throughout plant organs.
Apical Meristem
Apical meristem, region of cells capable of division and growth in the root and shoot tips in plants. Apical meristems give rise to the primary plant body and are responsible for the extension of the roots and shoots. Unlike most animals, plants continue to grow throughout their entire life span because of the unlimited division of these and other meristems.
Meristematic tissue
1) Meristematic tissue contains undifferentiated cells that actively divide throughout a plant's life to form specialized structures like leaves, flowers, roots and shoots.
2) The tissue is usually found at root and shoot tips and helps increase plant length and girth.
3) Meristematic tissue is classified based on origin, development stage, position and function - including apical, intercalary and lateral meristems that contribute to height, internodal length and thickness.
Meristematic tissue
The document discusses plant tissues. It defines tissue as a group of organized cells with common origin, function and structure. There are three main types of tissues in plants: meristematic, permanent and specialized tissues. Meristematic tissue is made of actively dividing cells found in growing regions and gives rise to permanent tissues through cell differentiation. Permanent tissues include epidermis, ground and vascular tissues which make up the basic structure of plants. Specialized tissues are further classified into external and internal secretory tissues.
meristematictissue-740 (1).pd
The document discusses plant tissues. It defines tissue as a group of organized cells with common origin, function and structure. There are three main types of tissues in plants: meristematic, permanent and specialized tissues. Meristematic tissue is made of actively dividing cells found in growing regions and gives rise to permanent tissues through cell differentiation. Permanent tissues include epidermis, ground and vascular tissues which make up the basic structure of plants. Specialized tissues are further classified into external and internal secretory tissues.
Plant tissues final
This document provides information on plant tissues and the differences between monocot and dicot plants. It begins with an introduction to plant tissues, including meristematic and permanent tissues. It then describes the key tissues like epidermis, parenchyma, collenchyma, sclerenchyma and vascular tissues. Next, it highlights the differences between monocots and dicots with regards to their seed leaves, vascular bundles, flower parts, mature leaves and roots. It also provides microscopic images of monocot and dicot structures. The document concludes with information about practical training on plant identification which includes a list of drugs and their powder and tissue section microscopic analysis.
Plant tissues and its types (part I)
This document discusses meristematic tissue in plants. It begins by defining meristematic tissue as a group of cells that remain in a continuous state of division and growth. It then lists the key characteristics of meristematic cells, such as being immature, thin-walled, and having abundant cytoplasm and nuclei. The document goes on to explain that meristems allow for continuous growth throughout a plant's life, unlike in animals where growth stops once adult size is reached. It classifies meristems based on development stage, origin, position in the plant, and function. Apical, intercalary, and lateral meristems are described based on their position. The role of meristems in primary and secondary
Plant structure, growth, and reproduction by Campbell Biology 7th edition
Plants have organs composed of tissues and cells. The three basic plant organs are roots, stems, and leaves. Plants grow through cell division and elongation via apical and lateral meristems. Meristems allow plants to grow continuously, unlike animals. Flowering plants reproduce sexually through flowers containing modified leaves called sepals, petals, stamens, and carpels. Pollination allows fertilization and seed production, completing the plant life cycle.
Plant tissues
This document provides information about plant tissues. It begins by defining tissues as groups of closely associated cells that perform related functions. It then discusses the main types of plant tissues: meristematic tissues, which are undifferentiated and allow for plant growth; permanent tissues, including dermal tissue (epidermis and periderm), ground tissues (parenchyma, collenchyma, sclerenchyma), and vascular tissues (xylem and phloem). Each tissue type is described in terms of its structure, location in plants, and functions. The document presents this information through definitions, descriptions, diagrams and a table.
Plant tissues copy
Plant tissues are specialized collections of cells that perform specific functions. There are two main types of plant tissues: meristematic tissues and permanent tissues. Meristematic tissues are undifferentiated tissues responsible for growth, consisting of apical, intercalary, and lateral meristems. Permanent tissues are differentiated tissues, which can be living or dead, and include simple tissues like parenchyma, collenchyma, and sclerenchyma, as well as complex tissues like xylem and phloem. Each tissue type has a distinct structure and role in plant structure and function.
Plant growth and development
Plant growth and development occurs through various processes. Leaves grow from leaf primordia in the shoot apical meristem and develop through unfolding of the leaf blade. Roots grow from the root apical meristem through cell division and differentiation. Stems provide support and transport of water and nutrients through primary growth in length and secondary growth in thickness. Tubers are storage and reproductive structures that develop from thickened stems or roots. Plant growth is driven by mechanisms like seed germination, photosynthesis, and plant hormones that regulate cell division and expansion.
Plant Tissues
This powerpoint presentation is mainly about the type of plant tissues, major parts of plant with their modifications.
plant tissue presentation
definition,figure,function of plant tissue,. types of plant tissue ,structure ,advantage,disadvantage of plant tissue and end .
Plant tissues and organs
The document summarizes plant tissues and organs. It describes the main cell types in plants including parenchyma, collenchyma and sclerenchyma cells which provide structure and support. It also discusses vascular tissues like xylem and phloem which transport water and nutrients. Xylem transports water and minerals from roots to leaves while phloem transports carbohydrates. The document also outlines the three main tissue systems - vascular, dermal and ground tissues. Meristematic tissues contain stem cells that allow continuous growth. Leaves contain mesophyll and epidermal tissues for photosynthesis and gas exchange.
(1) Plant Tissues.ppt
Plant tissues fall into two categories: meristematic and permanent. Meristematic tissues are places where cell division occurs and include apical, intercalary, and lateral meristems. Apical meristems are located at shoot and root tips and cause primary growth. Dicots also have lateral meristems, which cause secondary growth and increase stem diameter. Permanent tissues include the epidermis, xylem, phloem, cortex, pith, and fibers. The epidermis covers plant surfaces and contains stomata. Xylem conducts water and phloem transports food. Fibers provide strength and support.
Planttissues by pooja 1
Plant tissues can be divided into two main types - meristematic and permanent tissues. Meristematic tissues are actively dividing and responsible for growth. They are found in apical, lateral, and intercalary meristems. Permanent tissues have stopped dividing and perform specific functions. These include dermal tissues like epidermis and periderm, ground tissues like parenchyma and sclerenchyma, and vascular tissues for transport, like xylem and phloem. Xylem transports water and nutrients upward and is composed of tracheids and vessel elements. Phloem transports organic nutrients in all directions and contains sieve tube elements.
types of meristems.
This document summarizes the different types of meristematic tissue in plants. Meristematic tissue consists of actively dividing cells that allow plants to grow and develop different cell types. There are three main types of meristematic tissue based on origin: promeristem, primary meristem, and secondary meristem. Additionally, meristematic tissue can be categorized based on position as apical, intercalary, or lateral meristems. Finally, meristematic tissue types can be distinguished based on their function in forming epidermal, vascular, or ground tissues systems or based on their plane of cell division as rib, plate, or mass meristems.
Meristematic tissue
It explains about what is plant tissue & both the types i.e meristem & permanent tissue. It also explains about the general characteristic, and how it has been classified based on origin, position, function and plane. It also furnish further information regarding the above
Plant leaf
Plant leaves help to sustain life on earth as they generate food for both plant and animal life. The leaf is the site of photosynthesis in plants. Photosynthesis is the process of absorbing energy from sunlight and using it to produce food in the form of sugars. Leaves make it possible for plants to fulfill their role as primary producers in food chains. Not only do leaves make food, but they also generate oxygen during photosynthesis and are major contributors to the cycle of carbon and oxygen in the environment. Leaves are a part of the plant shoot system, which also includes stems and flowers.
1. Plant leaves are very important structures as they help to maintain life on earth by generating food (sugars) via photosynthesis.
2. Leaves can have different shapes and sizes. The basic components of leaves in flowering plants (angiosperms) include the blade, the petiole, and the stipules.
3. There are three main tissues found in leaves: the epidermis, the mesophyll, as well as vascular tissue. Each tissue type is composed of layers of cells.
In addition to performing photosynthesis, some plants have other highly specialized functions. Examples include carnivorous plants that can 'eat' insects.
4. Some animals, like the Indian leafwing butterfly, mimic leaves to camouflage themselves from predators.
Plant tissues
A plant tissue is a cell or a group of cells that give rise to large number of cell, which is collectively called tissues.
Planttissues by pooja
Plant tissues are classified into meristematic tissues and permanent tissues. Meristematic tissues consist of actively dividing cells found in specific regions of plants, such as the tips of stems and roots, and are responsible for growth. There are three types of meristematic tissue: apical, lateral, and intercalary. Permanent tissues derive from meristematic tissues and take on permanent shapes and functions. There are three types of permanent tissues - simple tissues like parenchyma, collenchyma and sclerenchyma, and complex tissues like xylem and phloem that make up the vascular system. Xylem transports water and minerals throughout the plant, while phloem transports sugars and nutrients.
Basic principles of Pharmacognosy
This document provides an overview of basic principles of pharmacognosy. It begins by defining pharmacognosy as the study of medicinal drugs obtained from plants or other natural sources. It then discusses plant cells, tissues, and the three main tissue systems - epidermal, ground, and vascular. Specific plant structures like stems, leaves, flowers, fruits, and seeds are also summarized in terms of their structure and function. The document provides a comprehensive introduction to plant anatomy and physiology relevant to the study of herbal medicines.
Plant tissues
This document summarizes the different types of plant tissues. It explains that plants are made of cells organized into tissues with specific functions. There are two main types of tissues - permanent tissues which include dermal, ground, and vascular tissues that provide structure and transport; and meristematic tissues which are dividing cells that produce new cells and allow for plant growth. The document provides details on the characteristics and roles of each type of tissue.
Plant Tissues
This document discusses plant tissues and their classification. There are two main types of plant tissues: meristematic and permanent tissues. Meristematic tissues are dividing tissues found in regions of growth called meristems, including apical, lateral, and intercalary meristems. Permanent tissues have stopped dividing and take on specialized functions, including simple tissues like epidermis, parenchyma, chlorenchyma, and sclerenchyma, as well as complex vascular tissues like xylem and phloem which transport water and nutrients throughout the plant.
Bio102 chapter 25 (1)
Plants have evolved structural adaptations for life on land, including mechanisms for transporting water and minerals throughout the plant and supporting structures to withstand gravitational and environmental forces. Plant cells contain cell walls, chloroplasts, and a large central vacuole. There are four main types of plant cells - parenchyma, collenchyma, sclerenchyma, and vascular cells. The basic structures of plants are roots, stems, leaves, and flowers. Roots anchor plants and absorb water and minerals, stems provide structure and transport, leaves perform photosynthesis, and flowers facilitate reproduction.
Roots, stems and leaves notes serena
This document provides information about plant anatomy and physiology. It discusses the main tissues and organs of plants including roots, stems, and leaves. Roots function to absorb water and nutrients from the soil. Stems transport water and nutrients between the roots and leaves. Leaves contain chloroplasts and carry out photosynthesis to produce food for the plant. The document also describes the three main tissue systems - dermal, vascular, and ground tissues - and their roles in plant structure and function.
Plants
This document provides an overview of the key structures and functions of plants. It discusses the main tissue systems - dermal, vascular and ground tissues - that make up plant bodies and allow them to transport water and nutrients. Roots are described as having important functions of nutrient/water uptake and transport. Stems are discussed as providing structure, support and a transport system between roots and leaves. Leaves are highlighted as the main photosynthetic organs. The document also covers plant diversity and types of plant reproduction including seeds and their protective structures.
PLANT TISSUES
This document discusses the three types of meristematic tissues in plants: apical meristems, intercalary meristems, and lateral meristems. Apical meristems are located at shoot and root tips and facilitate primary growth. Dicots have apical meristems in both shoots and roots, while monocots only have them in roots. Monocots also have intercalary meristems that allow leaf regrowth. Lateral meristems cause secondary growth in dicots by increasing stem diameter. The document also describes simple and complex permanent tissues, including parenchyma, collenchyma, sclerenchyma, xylem, and phloem.
A health program planning committee wants to address various health .pdf
A health program planning committee wants to address various health problems by developing
programs for each health problem at all four levels of the public health pyramid. What would be
some implications of this perspective on setting priorities and on the nature of the subsequent
community health assessment?
Solution
The bottom tire consists of Infrastructure development: The most essential and set with high
priority. As it affects a larger population .This includes development of basic infrastructures like
electricity, sanitation, clean drinking water, hospitals, transportation and above all education.
The second tire from bottom tire consists of Population based services: It includes public
awareness programmes through print and television media for control of disease and prevention
of population from getting affected. It is a less costly but has a greater impact on mass
population. Healthier food and clean drinking water should be made available to all. It holds the
second highest priority as it will decrease the chance of illness.
The third tire from bottom consists of enabling services. It provides health education and
promotion of health care products among a community. Immunization programmes and
increasing awareness among population regarding the impact of hazardous chemicals on their
health. Enforcement of laws if required for betterment of public health like avoid alcohol while
driving, no smoking zones etc. It holds the third highest priority as prevention is better than cure.
The top tire consists of direct health care: It includes availability clinical care for individuals
affected and their proper treatment in due course of time. This applies to a smaller population but
is also very essential for communities..
Which one of the following significantly contributes to the specifici.pdf
Which one of the following significantly contributes to the specificity of base pairing in double-
stranded DNA, i.e., limits base pairing to cytosine-guanine (C:G) or adenine-thymine (A:T)? the
right handedness of double-stranded DNA hydrogen bonding between bases base-stacking
interactions the phosphodiester bonds between phosphate groups and deoxyribose sugar
molecules
Solution
Answer:
Base-stacking interactions
Explanation:
The purine and pyrimidine bases are hydrophobic and relatively insoluble in water at the near-
neutral pH of the cell. At acidic or alkaline pH the bases become charged and their solubility in
water increases. Hydrophobic stacking interactions in which two or more bases are positioned
with the planes of their rings parallel (like a stack of coins) are one of two important modes of
interaction between bases in nucleic acids. The stacking also involves a combination of van der
Waals and dipole-dipole interactions between the bases. Base stacking helps to minimize contact
of the bases with water, and base-stacking interactions are very important in stabilizing the three-
dimensional structure of nucleic acids..
More Related Content
Similar to Explain the functions of the different types of meristems found in pl.pdf
Plant tissues
This document provides information about plant tissues. It begins by defining tissues as groups of closely associated cells that perform related functions. It then discusses the main types of plant tissues: meristematic tissues, which are undifferentiated and allow for plant growth; permanent tissues, including dermal tissue (epidermis and periderm), ground tissues (parenchyma, collenchyma, sclerenchyma), and vascular tissues (xylem and phloem). Each tissue type is described in terms of its structure, location in plants, and functions. The document presents this information through definitions, descriptions, diagrams and a table.
Plant tissues copy
Plant tissues are specialized collections of cells that perform specific functions. There are two main types of plant tissues: meristematic tissues and permanent tissues. Meristematic tissues are undifferentiated tissues responsible for growth, consisting of apical, intercalary, and lateral meristems. Permanent tissues are differentiated tissues, which can be living or dead, and include simple tissues like parenchyma, collenchyma, and sclerenchyma, as well as complex tissues like xylem and phloem. Each tissue type has a distinct structure and role in plant structure and function.
Plant growth and development
Plant growth and development occurs through various processes. Leaves grow from leaf primordia in the shoot apical meristem and develop through unfolding of the leaf blade. Roots grow from the root apical meristem through cell division and differentiation. Stems provide support and transport of water and nutrients through primary growth in length and secondary growth in thickness. Tubers are storage and reproductive structures that develop from thickened stems or roots. Plant growth is driven by mechanisms like seed germination, photosynthesis, and plant hormones that regulate cell division and expansion.
Plant Tissues
This powerpoint presentation is mainly about the type of plant tissues, major parts of plant with their modifications.
plant tissue presentation
definition,figure,function of plant tissue,. types of plant tissue ,structure ,advantage,disadvantage of plant tissue and end .
Plant tissues and organs
The document summarizes plant tissues and organs. It describes the main cell types in plants including parenchyma, collenchyma and sclerenchyma cells which provide structure and support. It also discusses vascular tissues like xylem and phloem which transport water and nutrients. Xylem transports water and minerals from roots to leaves while phloem transports carbohydrates. The document also outlines the three main tissue systems - vascular, dermal and ground tissues. Meristematic tissues contain stem cells that allow continuous growth. Leaves contain mesophyll and epidermal tissues for photosynthesis and gas exchange.
(1) Plant Tissues.ppt
Plant tissues fall into two categories: meristematic and permanent. Meristematic tissues are places where cell division occurs and include apical, intercalary, and lateral meristems. Apical meristems are located at shoot and root tips and cause primary growth. Dicots also have lateral meristems, which cause secondary growth and increase stem diameter. Permanent tissues include the epidermis, xylem, phloem, cortex, pith, and fibers. The epidermis covers plant surfaces and contains stomata. Xylem conducts water and phloem transports food. Fibers provide strength and support.
Planttissues by pooja 1
Plant tissues can be divided into two main types - meristematic and permanent tissues. Meristematic tissues are actively dividing and responsible for growth. They are found in apical, lateral, and intercalary meristems. Permanent tissues have stopped dividing and perform specific functions. These include dermal tissues like epidermis and periderm, ground tissues like parenchyma and sclerenchyma, and vascular tissues for transport, like xylem and phloem. Xylem transports water and nutrients upward and is composed of tracheids and vessel elements. Phloem transports organic nutrients in all directions and contains sieve tube elements.
types of meristems.
This document summarizes the different types of meristematic tissue in plants. Meristematic tissue consists of actively dividing cells that allow plants to grow and develop different cell types. There are three main types of meristematic tissue based on origin: promeristem, primary meristem, and secondary meristem. Additionally, meristematic tissue can be categorized based on position as apical, intercalary, or lateral meristems. Finally, meristematic tissue types can be distinguished based on their function in forming epidermal, vascular, or ground tissues systems or based on their plane of cell division as rib, plate, or mass meristems.
Meristematic tissue
It explains about what is plant tissue & both the types i.e meristem & permanent tissue. It also explains about the general characteristic, and how it has been classified based on origin, position, function and plane. It also furnish further information regarding the above
Plant leaf
Plant leaves help to sustain life on earth as they generate food for both plant and animal life. The leaf is the site of photosynthesis in plants. Photosynthesis is the process of absorbing energy from sunlight and using it to produce food in the form of sugars. Leaves make it possible for plants to fulfill their role as primary producers in food chains. Not only do leaves make food, but they also generate oxygen during photosynthesis and are major contributors to the cycle of carbon and oxygen in the environment. Leaves are a part of the plant shoot system, which also includes stems and flowers.
1. Plant leaves are very important structures as they help to maintain life on earth by generating food (sugars) via photosynthesis.
2. Leaves can have different shapes and sizes. The basic components of leaves in flowering plants (angiosperms) include the blade, the petiole, and the stipules.
3. There are three main tissues found in leaves: the epidermis, the mesophyll, as well as vascular tissue. Each tissue type is composed of layers of cells.
In addition to performing photosynthesis, some plants have other highly specialized functions. Examples include carnivorous plants that can 'eat' insects.
4. Some animals, like the Indian leafwing butterfly, mimic leaves to camouflage themselves from predators.
Plant tissues
A plant tissue is a cell or a group of cells that give rise to large number of cell, which is collectively called tissues.
Planttissues by pooja
Plant tissues are classified into meristematic tissues and permanent tissues. Meristematic tissues consist of actively dividing cells found in specific regions of plants, such as the tips of stems and roots, and are responsible for growth. There are three types of meristematic tissue: apical, lateral, and intercalary. Permanent tissues derive from meristematic tissues and take on permanent shapes and functions. There are three types of permanent tissues - simple tissues like parenchyma, collenchyma and sclerenchyma, and complex tissues like xylem and phloem that make up the vascular system. Xylem transports water and minerals throughout the plant, while phloem transports sugars and nutrients.
Basic principles of Pharmacognosy
This document provides an overview of basic principles of pharmacognosy. It begins by defining pharmacognosy as the study of medicinal drugs obtained from plants or other natural sources. It then discusses plant cells, tissues, and the three main tissue systems - epidermal, ground, and vascular. Specific plant structures like stems, leaves, flowers, fruits, and seeds are also summarized in terms of their structure and function. The document provides a comprehensive introduction to plant anatomy and physiology relevant to the study of herbal medicines.
Plant tissues
This document summarizes the different types of plant tissues. It explains that plants are made of cells organized into tissues with specific functions. There are two main types of tissues - permanent tissues which include dermal, ground, and vascular tissues that provide structure and transport; and meristematic tissues which are dividing cells that produce new cells and allow for plant growth. The document provides details on the characteristics and roles of each type of tissue.
Plant Tissues
This document discusses plant tissues and their classification. There are two main types of plant tissues: meristematic and permanent tissues. Meristematic tissues are dividing tissues found in regions of growth called meristems, including apical, lateral, and intercalary meristems. Permanent tissues have stopped dividing and take on specialized functions, including simple tissues like epidermis, parenchyma, chlorenchyma, and sclerenchyma, as well as complex vascular tissues like xylem and phloem which transport water and nutrients throughout the plant.
Bio102 chapter 25 (1)
Plants have evolved structural adaptations for life on land, including mechanisms for transporting water and minerals throughout the plant and supporting structures to withstand gravitational and environmental forces. Plant cells contain cell walls, chloroplasts, and a large central vacuole. There are four main types of plant cells - parenchyma, collenchyma, sclerenchyma, and vascular cells. The basic structures of plants are roots, stems, leaves, and flowers. Roots anchor plants and absorb water and minerals, stems provide structure and transport, leaves perform photosynthesis, and flowers facilitate reproduction.
Roots, stems and leaves notes serena
This document provides information about plant anatomy and physiology. It discusses the main tissues and organs of plants including roots, stems, and leaves. Roots function to absorb water and nutrients from the soil. Stems transport water and nutrients between the roots and leaves. Leaves contain chloroplasts and carry out photosynthesis to produce food for the plant. The document also describes the three main tissue systems - dermal, vascular, and ground tissues - and their roles in plant structure and function.
Plants
This document provides an overview of the key structures and functions of plants. It discusses the main tissue systems - dermal, vascular and ground tissues - that make up plant bodies and allow them to transport water and nutrients. Roots are described as having important functions of nutrient/water uptake and transport. Stems are discussed as providing structure, support and a transport system between roots and leaves. Leaves are highlighted as the main photosynthetic organs. The document also covers plant diversity and types of plant reproduction including seeds and their protective structures.
PLANT TISSUES
This document discusses the three types of meristematic tissues in plants: apical meristems, intercalary meristems, and lateral meristems. Apical meristems are located at shoot and root tips and facilitate primary growth. Dicots have apical meristems in both shoots and roots, while monocots only have them in roots. Monocots also have intercalary meristems that allow leaf regrowth. Lateral meristems cause secondary growth in dicots by increasing stem diameter. The document also describes simple and complex permanent tissues, including parenchyma, collenchyma, sclerenchyma, xylem, and phloem.
Similar to Explain the functions of the different types of meristems found in pl.pdf (20)
More from lejeunehayneswowel96
A health program planning committee wants to address various health .pdf
A health program planning committee wants to address various health problems by developing
programs for each health problem at all four levels of the public health pyramid. What would be
some implications of this perspective on setting priorities and on the nature of the subsequent
community health assessment?
Solution
The bottom tire consists of Infrastructure development: The most essential and set with high
priority. As it affects a larger population .This includes development of basic infrastructures like
electricity, sanitation, clean drinking water, hospitals, transportation and above all education.
The second tire from bottom tire consists of Population based services: It includes public
awareness programmes through print and television media for control of disease and prevention
of population from getting affected. It is a less costly but has a greater impact on mass
population. Healthier food and clean drinking water should be made available to all. It holds the
second highest priority as it will decrease the chance of illness.
The third tire from bottom consists of enabling services. It provides health education and
promotion of health care products among a community. Immunization programmes and
increasing awareness among population regarding the impact of hazardous chemicals on their
health. Enforcement of laws if required for betterment of public health like avoid alcohol while
driving, no smoking zones etc. It holds the third highest priority as prevention is better than cure.
The top tire consists of direct health care: It includes availability clinical care for individuals
affected and their proper treatment in due course of time. This applies to a smaller population but
is also very essential for communities..
Which one of the following significantly contributes to the specifici.pdf
Which one of the following significantly contributes to the specificity of base pairing in double-
stranded DNA, i.e., limits base pairing to cytosine-guanine (C:G) or adenine-thymine (A:T)? the
right handedness of double-stranded DNA hydrogen bonding between bases base-stacking
interactions the phosphodiester bonds between phosphate groups and deoxyribose sugar
molecules
Solution
Answer:
Base-stacking interactions
Explanation:
The purine and pyrimidine bases are hydrophobic and relatively insoluble in water at the near-
neutral pH of the cell. At acidic or alkaline pH the bases become charged and their solubility in
water increases. Hydrophobic stacking interactions in which two or more bases are positioned
with the planes of their rings parallel (like a stack of coins) are one of two important modes of
interaction between bases in nucleic acids. The stacking also involves a combination of van der
Waals and dipole-dipole interactions between the bases. Base stacking helps to minimize contact
of the bases with water, and base-stacking interactions are very important in stabilizing the three-
dimensional structure of nucleic acids..
Which of the following is true of a mainframe, or central, computer t.pdf
Which of the following is true of a mainframe, or central, computer that you may find in an
industrial application? It interfaces with manufacturing processes directly. It eliminates any need
for system firmware. It does away with most applications software. It receives information from
one or more workstations. Multiplexing is a means of in order to channel data. organizing the
transmission of signals from many lines onto one line transmitting signals by changing their
amplitude, frequency, or phase mixing and transmitting both synchronous and asynchronous
signals simultaneously mixing and transmitting both analog and digital signals simultaneously
The device shown isolates digital inputs and outputs from machinery grounds by emitting to a
phototransistor. visible light X rays infrared sound The primary purpose of interface hardware in
an industrial control system is to reduce the processor\'s overhead runtime. provide compatibility
between synchronous and asynchronous transmissions. provide a communications link between
the MPU and peripheral devices. connect the MPU to its internal registers.
Solution
1) Which of the following is true of a mainframe, or central, computer that you may
find in an industrial application?
A. It inter,faces with manufacturing processes directly.
B. It eliminates any need for system firmware.
C. It does away with most applications software.
D. It receives information from one or more workstations.
Answer:
A) It inter,faces with manufacturing processes directly.
2. Multiplexing is a means of----- in order to channel data.
A. organizing the transmission of signals from many lines onto one line
B. transmitting signals by changing their amplitude, frequency, or phase
C. mixing and transmitting both synchronous and asynchronous signals simultaneously
D. mixing and transmitting both analog and digital signals simultaneously
Answer:
A) organizing the transmission of signals from many lines onto one line.
4. The primary purpose of interface hardware in an industrial control system is to
A. reduce the processor\'s overhead runtime.
B. provide compatibility between synchronous and asynchronous transmissions.
C. provide a communications link between the MPU and peripheral devices.
D. connect the MPU to its internal registers.
Answer:
C) provide a communications link between the MPU and peripheral devices..
What type of security is there for a computer serverSolutionA.pdf
What type of security is there for a computer server?
Solution
Answer:
Security is the main concern to every IT organisation as it should be because everything is been
sent through the internet. It is responsibility of IT department manager to provide security to a
computer server. Here are the few types of security for a computer server :.
Which of the following is an economic system where the major means o.pdf
Which of the following is an economic system where the major means of production are
privately owned
Mercantilism
Monopoly
Normative system engineering
Capitalism
Utilitarianism
Mercantilism
Monopoly
Normative system engineering
Capitalism
Utilitarianism
Solution
Capitalism is a structure where mostly firms are owned and controlled by private individuals and
there is no interference by the government. The motive of the firms is to earn more and more
profits. Whereas in a socialist structure the firms are owned and controlled by the government
and the main aim is welfare of the society and not to earn profits..
Which of the following are affine properties (Which are preserved u.pdf
Which of the following are affine properties? (Which are preserved under affine
transformations?)
Distance, circularity, collinearity, magnitude of angle, midpoint of line segment.
Solution
An affine transformation preserves the collinearity relation between points such that points
which lie on the same line (called collinear points) continue to be collinear after the
transformation..
What is a muno and what is a scintillation What is a muno and .pdf
What is a muno and what is a scintillation?
What is a muno and what is a scintillation?
Solution
I suppose you were to ask about Muon and not Muno.
To put it simply, Muons are sub-atomic particles, and do not consitute any other known particle,
that is, they are fundamental particles. Muons are similar to electrons but heavier, in fact, 207
times heavier than electrons.
Muons are fundamental particles, still very unfamiliar for the fact that they are radioactive and
decay with an afterlife of 1.5 millionth of a second. Muons decay into an electron and two
neutrinos as per:
µ ---> e+ e + µ [muon ---> electron + electron antineutrino + muon neutrino]
Scintillation refers to the flashes that appear on a scintillation counter whenever a particle passes
through them. Scintillation counters exist for gamma, x-ray, beta, and alpha radiation. By the
amount of Scintillation energy produced, we can predict the properties of the particles..
A psychologist wishes to conduct a study on the effects of music dep.pdf
A psychologist wishes to conduct a study on the effects of music deprivation on high school
students. A high school class consists of the 30 students numbered in the list below. The
researcher establishes a treatment group of 15 students who will have their portable music
players replaced by experimental players that present the sound of water running. The control
group of 15 students will all get regular portable music players, stuffed full of their favorite
songs.Use the line of random numbers below to select the first 5 students to receive the
treatment. What is the name of the fourth student selected? 59784 44312 15954 09233 00046
74318 02610 57396 16843 38454
00 Aaron 01 Buffy 02 Chandler 03 Cindy 04 Drusilla 05 Eric 06 Fallon 07 Graham 08 heather
09 Hsin-Chi 10 Ismail 11 Jasmine 12 Kiefer 13 Lucia 14 Monte 15 Naomi 16 Otis 17 Polly 18
Quincy 19 Rachael 20 Sarah 21 Stacy 22 Tasha 23 Tuan 24 Ukiah 25 Valerie 26 Wahib 27
Xavier 28 Yolanda 29 Zachary
Solution
The given random can be arranged in two digits numbers as follows:
59, 78, 44, 43, 12, 15, 95, 40, 92, 33, 00, 04, 67, 43, 18, 02, 61, 05, 73, 96, 16, 84, 33, 84, 54
Out of these we have to select the numbers that are between 00 and 29. Selected numbers are as
follows:
12, 15, 00, 04, 18, 02, 05, 16,
So the five first selected students are as follows:
12- Kiefer
15- Naomi
00- Aaron
04- Drusilla
18- Quincy
------------
The name of the fourth student selected is Drusilla..
This week you surveyed many different groups of living things. What D.pdf
This week you surveyed many different groups of living things. What Domain of living things is
thought to have been the first form of life on Earth? Name one piece of evidence that exists for
the claim that these were the earliest living things?
Solution
Archaea are found in the harshest environments on Earth, and are the oldest known organisms on
Earth, appearing in the fossil record over 3.6 BILLION years ago
Archaea display unique capacities, such as methanogenesis and survival at temperatures higher
than 90 °C, that make them crucial for understanding the nature of the biota of early Earth..
Urn I contains 9 yellow marbles and 7 brown marbles. Urn II contains.pdf
Urn I contains 9 yellow marbles and 7 brown marbles. Urn II contains 10 yellow marbles and 6
brown marbles. Urn III contains 7 yellow marbles and 11 brown marbles. The probability that
Urn I will be selected is 0.42, th e probability that Urn II will be selected is 0.45, and the
probability that Urn III will be selected i s 0.13. Find each probability: D. The probability that
the marble selected was from Urn II, if it is known that the marble was yellow.
Solution.
The restriction enzyme EcoRI recognizes a 6 bp (palindromic) sequenc.pdf
The restriction enzyme EcoRI recognizes a 6 bp (palindromic) sequence. On average, how often
would this enzyme cut a random sequence of DNA? How many times would the enzyme cut the
E. coli genome? (The E. coli genome contains 4.6 x 106 bp).
Solution
There are 4 types of bases so the chances of each base to cut in the sequence is
(1/4) (1/4) (1/4) (1/4) (1/4) (1/4)= (1/4)6 base pairs=1/4096. Now as the DNA sequence is
completely random and we can expect that the enzyme may cut the DNA once every 4096 bases.
Now the E.coli genome contains 4.6 x 106 base pairs of sequence.
Then the cutting site will be in the whole E.coli genome is (4.6*106 /4096)= 1123 times..
The vertical motion of a mass attached to a spring is described by t.pdf
The vertical motion of a mass attached to a spring is described by the IVP
Solution
the associated equation is 1/4x^2+x+1=0 or x^2+4x+4=0 (x+2)^2=0 so the solution
is of the form x=Ae^(-2t)+Bte^(-2t) using x(0)=4 we get A=4 x\'(0)=-2A+B=2 B=10 x=4e^(-
2t)+10te^(-2t) x\'=-8e^(-2t)+10e^(-2t)-16te^(-2t)=0 2-16t=0 t=1/8 x\'>0 before 1/8 and x\'>0
after 1/8 So the maximum vertical is when t=1/8.
There are several types of bacterial toxins that are categorized as .pdf
There are several types of bacterial toxins that are categorized as spreading factors. One of those
is leukocidins. Do the 3 species of staphylococci you\'ve described produce leukocidins? What is
their function? How do they work?
Solution
Leukocidins are toxins secreted by Staphylococcus aureus, Streptococcus pyogenes, and S.
pneumoniae
Among the three important Staphylococci, viz., S. aureus, S.epidermidis, and S.saprophiticus,
leukocidins play a major role in the pathogenesis of S. aureus.
Leukocidins are toxins that kill leukocytes (lit., Leuko: for leukocytes and caedo: killing) with or
without lysis.
In Streptococcus aureus, they attacks neutrophils, disrupt their membrane that leads to the release
of the lysosomal contents, thereby, killing them..
the life span of the general population. is the distribution uni.pdf
the life span of the general population. is the distribution uniform, unimodal or bimodal?
the life span of the general population. is the distribution uniform, unimodal or bimodal?
the life span of the general population. is the distribution uniform, unimodal or bimodal?
Solution
the life span of the general population follows exponential distribution.It is unimodel..
1.2.3.4.SolutionThe number of observations per cell was 3To.pdf
1.2.3.4.
Solution
The number of observations per cell was: 3
Total df=23
Total observation = 24
Interaction Df=3
Df for amplifier and position are (1 and 3) any order
Number of factors for amplifier and position = (2 and 4) any order
Observations per cell = 24/(2*4) =3
Two-factor ANOVA with replication
The two factors are PVC and Temperature.
Each cell having 3 observations or replications..
A volume of 0.0125 m3 at a temperature of 1300C and pressure at 90kP.pdf
A volume of 0.0125 m3 at a temperature of 1300C and pressure at 90kPa has the temperature
increased by 150oF.
What is the new volume?
Solution
increase in temperature = 150 F = 65.556 C
As process is not mentioned, considering isobaric process (p=Constant)
New volume = Vf
= (Tf*Vi/Ti)
= 0.0125 * (1300+65.556)/1300
= 0.01313 m3.
Please help!!!I can change a link layer protocol and the applicati.pdf
Please help!!!
I can change a link layer protocol and the application layer protocol does not need to know or be
made aware of the change. Explain why?
Solution
Answer :-
The protocols are like a pile of building blocks stacked one upon another. Because of this
appearance, the structure is often called a stack or protocol stack.
A layer does not define a single protocol it defines a data communications function that may be
performed by any number of protocols. Therefore, each layer may contain multiple protocols,
each providing a service suitable to the function of that layer. For example, a file transfer
protocol and an electronic mail protocol both provide user services, and both are part of the
Application Layer.
1) Application Layer :-
The Application Layer is the level of the protocol hierarchy where user-accessed network
processes reside. In this text, a TCP/IP application is any network process that occurs above the
Transport Layer. This includes all of the processes that users directly interact with as well as
other processes at this level that users are not necessarily aware of.
2) Presentation Layer :-
For cooperating applications to exchange data, they must agree about how data is represented. In
OSI, the Presentation Layer provides standard data presentation routines. This function is
frequently handled within the applications in TCP/IP, though TCP/IP protocols such as XDR and
MIME also perform this function.
3) Session Layer :-
As with the Presentation Layer, the Session Layer is not identifiable as a separate layer in the
TCP/IP protocol hierarchy. The OSI Session Layer manages the sessions (connections) between
cooperating applications. In TCP/IP, this function largely occurs in the Transport Layer, and the
term “session” is not used; instead, the terms “socket” and “port” are used to describe the path
over which cooperating applications communicate.
4) Transport Layer:
Much of our discussion of TCP/IP is directed to the protocols that occur in the Transport Layer.
The Transport Layer in the OSI reference model guarantees that the receiver gets the data exactly
as it was sent. In TCP/IP, this function is performed by the Transmission Control Protocol
(TCP). However, TCP/IP offers a second Transport Layer service, User Datagram Protocol
(UDP), that does not perform the end-to-end reliability checks.
5) Network Layer :-
The Network Layer manages connections across the network and isolates the upper layer
protocols from the details of the underlying network. The Internet Protocol (IP), which isolates
the upper layers from the underlying network and handles the addressing and delivery of data, is
usually described as TCP/IP’s Network Layer.
6) Data Link Layer :-
The reliable delivery of data across the underlying physical network is handled by the Data Link
Layer. TCP/IP rarely creates protocols in the Data Link Layer. Most RFCs that relate to the Data
Link Layer discuss how IP can make use of existing data link protocols.
7) Physi.
4. (a) Negate the statement Sarah has a spaceship and has three f.pdf
4. (a) Negate the statement \'\'Sarah has a spaceship and has three fingers and is from Venus\'\'
and convert it to formal logic. (b) Simplify the statement from (a) as much as possible using
equivalence rules.
Solution
a) sarah neither have spaceship nor has three fingers nor is from venus.
b)s: sarah
S: spaceship
t: three fingers
v:venus
s-->S ^ t ^ v.
Match the bones in column A with the features in column B. Place the .pdf
Match the bones in column A with the features in column B. Place the letter of your choice in
the space provided. (Some answers are used more than once.) a. Ethmoid bone b. Frontal bone
c. Occipital bone d. Parietal bone e. Sphenoid bone f. Temporal bone
Solution
correct answers
a) Ethmoid bone - 2) Cribriform plate
b) Frontal lobe - 8) middle nosal concha
c) Occipital bone - 5) foramen magnum
d) Parietal bone - 1) form sagittal, coronal , squamous and lambdiod sutures
e) Sphenoid bone - 10) Sella turcica
f) Temporal bone - 11) Styloid process.
1. Prepare and analize the common statement for An.pdf
1.
Prepare and analize the common statement for Anandam Manufacturing Company. Show all
calculations.
2.
Prepare and analize the cash flow statement for Anandam Manufacturing Company. Show all
calculations.
3.
Calculate the ratios based on case Exhibit 3. Show all calculations. Based on financial analysis
of financial statements, would a loan officer grant a loan to Anandam financial company?
EXHIBIT 3: INDUSTRY AVERAGE OF KEY RATIos Sector Average Ratio 2:301 Current
ratio Acid test ratio (quick ratio) 120 Receivable tunover ratioimes turnover 52 days Receivable
days Inventory turmover ratio Inventory days Long-term detttototal debt Debt-to-equity ratio
Gross profit rato Net profit ratio Retun on equity Retum on total assets 4.85 times 75 days 24%
35% 40% 18% 22% 10% Total asset turnover ratio Ti Fixed asset turnover ratio Current asset
tunover ratio3 interest coverage ratio (tmes 10 nterest earned Warking captal smover ratio Retu
on ed sset
Solution
1….Common -size Income statement 2012-13 % to Total sales 2013-14 % to Total sales
2014-15 % to Total sales Analysis of % to Total sales proportion Sales Cash 200 10.00%
480 10.00% 800 10.00% Credit 1800 90.00% 4320 90.00% 7200 90.00% Total Sales 2000
100.00% 4800 100.00% 8000 100.00% COGS 1240 62.00% 2832 59.00% 4800 60.00%
COGS has reduced in the last 2 yrs. Gross profit 760 38.00% 1968 41.00% 3200 40.00% so,
G/P has increased Operating Expenses: Gen.adm.& sell.exp. 80 4.00% 450 9.38% 1000
12.50% % to sales has doubled in 2013-14 & increased by more than 25% in 2014-15
Depreciation 100 5.00% 400 8.33% 660 8.25% Has increased by 3% in the last 2 yrs.
Int.exp.(on borrowings) 60 3.00% 158 3.29% 340 4.25% Has slightly increased in 2014-15
Profit before tax(PBT) 520 26.00% 960 20.00% 1200 15.00% PBT% has reduced gradually in
both the yrs.due to increase in all operating expenses esp.gen admn.& sell exp. Tax at 30% 156
7.80% 288 6.00% 360 4.50% Decrease % due to decrease in profit % Profit after tax(PAT) 364
18.20% 672 14.00% 840 10.50% PAT% has reduced gradually in both the yrs.due to increase in
all operating expenses esp.gen admn.& sell exp. Common-size Balance
Sheet Assets % to Total % to Total % to Total Fixed assets(net of dep) 1900 74.22%
2500 44.64% 4700 51.33% Assets have decreased to the total Current assets Cash & Cash
equivalents 40 1.56% 100 1.79% 106 1.16% Slight variation in ratio to total Accounts
Receivables 300 11.72% 1500 26.79% 2100 22.94% Has increased in 2013-14 & again
decreased in 2014-15 Inventories 320 12.50% 1500 26.79% 2250 24.57% Has increased in
2013-14 & again decreased in 2014-15 Total 2560 100.00% 5600 100.00% 9156 100.00%
Equity & Liabilities Equity share capital($ 10) 1200 46.88% 1600 28.57% 2000 21.84%
Decreased steadily in all the 2 yrs. Reserves & surplus 364 14.22% 1036 18.50% 1876 20.49%
Increased steadily in both 2 yrs.due to increase in $ net income in those yrs. Long-term
borrowings 736 28.75% 1236 22.07% 2500 27.30% Decreased in 2013-14 & again increased i.
More from lejeunehayneswowel96 (20)
A health program planning committee wants to address various health .pdf
A health program planning committee wants to address various health .pdf
Which one of the following significantly contributes to the specifici.pdf
Which one of the following significantly contributes to the specifici.pdf
Which of the following is true of a mainframe, or central, computer t.pdf
Which of the following is true of a mainframe, or central, computer t.pdf
What type of security is there for a computer serverSolutionA.pdf
What type of security is there for a computer serverSolutionA.pdf
Which of the following is an economic system where the major means o.pdf
Which of the following is an economic system where the major means o.pdf
Which of the following are affine properties (Which are preserved u.pdf
Which of the following are affine properties (Which are preserved u.pdf
What is a muno and what is a scintillation What is a muno and .pdf
What is a muno and what is a scintillation What is a muno and .pdf
A psychologist wishes to conduct a study on the effects of music dep.pdf
A psychologist wishes to conduct a study on the effects of music dep.pdf
This week you surveyed many different groups of living things. What D.pdf
This week you surveyed many different groups of living things. What D.pdf
Urn I contains 9 yellow marbles and 7 brown marbles. Urn II contains.pdf
Urn I contains 9 yellow marbles and 7 brown marbles. Urn II contains.pdf
The restriction enzyme EcoRI recognizes a 6 bp (palindromic) sequenc.pdf
The restriction enzyme EcoRI recognizes a 6 bp (palindromic) sequenc.pdf
The vertical motion of a mass attached to a spring is described by t.pdf
The vertical motion of a mass attached to a spring is described by t.pdf
There are several types of bacterial toxins that are categorized as .pdf
There are several types of bacterial toxins that are categorized as .pdf
the life span of the general population. is the distribution uni.pdf
the life span of the general population. is the distribution uni.pdf
1.2.3.4.SolutionThe number of observations per cell was 3To.pdf
1.2.3.4.SolutionThe number of observations per cell was 3To.pdf
A volume of 0.0125 m3 at a temperature of 1300C and pressure at 90kP.pdf
A volume of 0.0125 m3 at a temperature of 1300C and pressure at 90kP.pdf
Please help!!!I can change a link layer protocol and the applicati.pdf
Please help!!!I can change a link layer protocol and the applicati.pdf
4. (a) Negate the statement Sarah has a spaceship and has three f.pdf
4. (a) Negate the statement Sarah has a spaceship and has three f.pdf
Match the bones in column A with the features in column B. Place the .pdf
Match the bones in column A with the features in column B. Place the .pdf
1. Prepare and analize the common statement for An.pdf
1. Prepare and analize the common statement for An.pdf
Recently uploaded
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
Main Java[All of the Base Concepts}.docx
This is part 1 of my Java Learning Journey. This Contains Custom methods, classes, constructors, packages, multithreading , try- catch block, finally block and more.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.The History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective UpskillingExcellence Foundation for South Sudan
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...National Information Standards Organization (NISO)
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.Recently uploaded (20)
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Azure Interview Questions and Answers PDF By ScholarHat
Azure Interview Questions and Answers PDF By ScholarHat
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Your Skill Boost Masterclass: Strategies for Effective Upskilling
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Pollock and Snow "DEIA in the Scholarly Landscape, Session One: Setting Expec...
Explain the functions of the different types of meristems found in pl.pdf
- 1. Explain the functions of the different types of meristems found in plants. Be able to distinguish between secretory tissues. Solution In plants, meristems are resent broadly of three types namely: 1. Apical meristem 2. intercalary Meristem 3. Lateral meristem 1. APICAL MERISTEM This is present at the root and shoot apex of the plant and is actively dividing zone. Shoot apcal meristem causes plant to grow up and root apical meristem causes thr roots to grow down in the soil. Apical meristems keep dividing and result in the primary growth of plant and the tissues formed as their division as named as Protoderm and Procambium. 2. INTERCALARY MERISTEM Intercalary meristem is found between the mature tisues like nodes and internodes. It functions to regulate the regenration of Tissues when the leaves and grasses are grazed by herbivores. This meristem is found mainly in monocot plants. 3. LATERAL MERISTEM This type of meristems is developed late in the plant life cycle and thus it is also known as secondary meristem. It functions in the secondary growth of plant where plant grows in girth not in height. Cork cambium fascisular cambium and interfascicular cambium are types of lateral meristems.