Tire Change
•
4 likes•586 views
To change a flat tire, engage the parking brake and put the transmission in park or reverse. Place a brick under the tire and jack the car up. Loosen the lug nuts and remove the flat tire. Replace it with the spare and securely tighten the lug nuts in a star pattern. Remove the jack and brick, and store the flat tire and tools.
Report
Share
Report
Share
Recommended
How To Change A Tire1
1. To change a tire, remove the hubcap if present and loosen the lug nuts counterclockwise using a lug wrench. Place the jack under the car in the location specified by the owner's manual and raise it until it contacts the frame.
2. Jack up the car further to lift the wheel off the ground, then remove the lug nuts and flat tire. Put the spare tire on and hand tighten the lug nuts.
3. Lower the car most of the way, then fully tighten the lug nuts before driving to a tire shop to repair the flat.
How To Change A Tire
The document provides instructions for changing a flat tire, including:
1) Check your tires regularly for proper pressure and tread wear to prevent issues.
2) If you get a flat while driving, pull over safely and turn on your hazard lights.
3) Find a level, stable place to change the tire and engage the parking brake before jacking up the car.
How to change your tire
The document provides step-by-step instructions for changing a tire. It begins with preparing the vehicle by applying the parking brake and placing blocks in front of and behind the wheels. It then instructs how to take out the spare tire and jack, position the jack under the frame, and raise the jack until it is supporting the vehicle. The steps continue with removing the hubcap and nuts, taking off the flat tire, putting on the spare tire, and tightening the nuts. The final steps are to lower the vehicle, finish tightening, and dispose of the flat tire.
How to change a tire
Changing a tire involves 10 steps: 1) pulling over safely, 2) using hazard lights and parking brake, 3) checking for necessary materials like a jack, wrench and spare tire, 4) loosening the lug nuts, 5) lifting the vehicle with the jack, 6) removing the lug nuts and tire, 7) placing the spare tire on, 8) replacing the lug nuts, 9) lowering the vehicle and tightening in an alternating pattern, and 10) fully lowering and finishing tightening. It's important to have the necessary tools like a jack and spare tire in your vehicle in case of an emergency flat tire.
How to bombard
This document provides steps for efficiently changing a tire during a racing pit stop. It outlines preparing the necessary tools like a jack, lug nuts, and impact wrench. It also recommends marking the jacking point on the car for quick access. The steps then describe jacking the car, removing the lug nuts, putting on the spare tire, and tightening the lug nuts in an alternating pattern for safety. Finally, it advises dropping the jack and signaling the driver that the pit stop is complete.
Original presentation
This document provides instructions for changing a flat tire, including how to safely park the car, gather the necessary tools (spare tire, jack, tire iron, wheel chocks), loosen the lug nuts, jack up the car, remove the flat tire, install the spare tire, tighten the lug nuts, and lower the car. It emphasizes safely securing the car with the parking brake and wheel chocks before jacking it up. Finally, it recommends taking the car to a tire shop for professional servicing after using the spare tire for temporary use.
How+To+Change+A+Tire
This document provides instructions for changing a flat tire in 7 steps:
1. Choose a safe location to change the tire and pull over.
2. Retrieve tools like a lug wrench from the vehicle.
3. Loosen the lug nuts on the flat tire.
4. Jack up the vehicle and remove the flat tire.
5. Position the spare tire and tighten the lug nuts enough to hold it in place.
6. Lower the vehicle back down.
7. Fully tighten the lug nuts on the spare tire.
Book 10 l3
To change a flat tire, you need to take the spare tire, lug wrench, and jack from the trunk. Loosen the lug nuts on the flat tire, jack up the car, remove the flat tire and replace it with the spare. Tighten the lug nuts on the spare tire by hand until you can't turn them further, then lower the car and finish tightening the nuts. Replace any removed hub caps and store the flat tire and tools back in the trunk.
Recommended
How To Change A Tire1
1. To change a tire, remove the hubcap if present and loosen the lug nuts counterclockwise using a lug wrench. Place the jack under the car in the location specified by the owner's manual and raise it until it contacts the frame.
2. Jack up the car further to lift the wheel off the ground, then remove the lug nuts and flat tire. Put the spare tire on and hand tighten the lug nuts.
3. Lower the car most of the way, then fully tighten the lug nuts before driving to a tire shop to repair the flat.
How To Change A Tire
The document provides instructions for changing a flat tire, including:
1) Check your tires regularly for proper pressure and tread wear to prevent issues.
2) If you get a flat while driving, pull over safely and turn on your hazard lights.
3) Find a level, stable place to change the tire and engage the parking brake before jacking up the car.
How to change your tire
The document provides step-by-step instructions for changing a tire. It begins with preparing the vehicle by applying the parking brake and placing blocks in front of and behind the wheels. It then instructs how to take out the spare tire and jack, position the jack under the frame, and raise the jack until it is supporting the vehicle. The steps continue with removing the hubcap and nuts, taking off the flat tire, putting on the spare tire, and tightening the nuts. The final steps are to lower the vehicle, finish tightening, and dispose of the flat tire.
How to change a tire
Changing a tire involves 10 steps: 1) pulling over safely, 2) using hazard lights and parking brake, 3) checking for necessary materials like a jack, wrench and spare tire, 4) loosening the lug nuts, 5) lifting the vehicle with the jack, 6) removing the lug nuts and tire, 7) placing the spare tire on, 8) replacing the lug nuts, 9) lowering the vehicle and tightening in an alternating pattern, and 10) fully lowering and finishing tightening. It's important to have the necessary tools like a jack and spare tire in your vehicle in case of an emergency flat tire.
How to bombard
This document provides steps for efficiently changing a tire during a racing pit stop. It outlines preparing the necessary tools like a jack, lug nuts, and impact wrench. It also recommends marking the jacking point on the car for quick access. The steps then describe jacking the car, removing the lug nuts, putting on the spare tire, and tightening the lug nuts in an alternating pattern for safety. Finally, it advises dropping the jack and signaling the driver that the pit stop is complete.
Original presentation
This document provides instructions for changing a flat tire, including how to safely park the car, gather the necessary tools (spare tire, jack, tire iron, wheel chocks), loosen the lug nuts, jack up the car, remove the flat tire, install the spare tire, tighten the lug nuts, and lower the car. It emphasizes safely securing the car with the parking brake and wheel chocks before jacking it up. Finally, it recommends taking the car to a tire shop for professional servicing after using the spare tire for temporary use.
How+To+Change+A+Tire
This document provides instructions for changing a flat tire in 7 steps:
1. Choose a safe location to change the tire and pull over.
2. Retrieve tools like a lug wrench from the vehicle.
3. Loosen the lug nuts on the flat tire.
4. Jack up the vehicle and remove the flat tire.
5. Position the spare tire and tighten the lug nuts enough to hold it in place.
6. Lower the vehicle back down.
7. Fully tighten the lug nuts on the spare tire.
Book 10 l3
To change a flat tire, you need to take the spare tire, lug wrench, and jack from the trunk. Loosen the lug nuts on the flat tire, jack up the car, remove the flat tire and replace it with the spare. Tighten the lug nuts on the spare tire by hand until you can't turn them further, then lower the car and finish tightening the nuts. Replace any removed hub caps and store the flat tire and tools back in the trunk.
Efficient Steps for Installation of the Wheel Hub Assembly
The wheel assembly is responsible for the smooth movement of your car. If you find that the wheel hub assembly is malfunctioning, then it is advised to get it replaced. You can do it all by yourself with some simple procedures like to prepare your car, remove the tires and brakes, remove the old wheel assembly, install the new wheel assembly, and at last evaluate the new assembly. See the mentioned slides to know the efficient steps for installation of the wheel hub assembly.
EVANNEX Glove Box Bumper Installation for Model S and X
This document provides installation instructions for a Glove Box Bumper product for Tesla Model S and Model X vehicles. It lists the necessary tools, which is just a tape measure or ruler. The instructions then describe a 3 step process for positioning and adhering the bumper to the inside of the glove box door using double-sided tape. The bumper is intended to improve storage efficiency in the glove box.
Window Control Covers
This document provides installation instructions for Window Control Covers for Tesla Model S and Model X vehicles. It begins with a disclaimer that the manufacturer is not responsible for any vehicle damage during installation or use of the product. It then lists the quick start installation steps, which include removing adhesive covers, adding extra adhesive strips to some pieces, positioning the covers and pressing firmly to adhere them. It notes that the smaller passenger side and rear covers install similarly without extra adhesive. The document concludes by stating the covers are intended for permanent installation but can be removed by prying, though the adhesive will be weakened and may not re-adhere properly.
7 safety techniques for operating a forklift
A forklift is a vehicle used to transport heavy and stored materials within a warehouse. It must always be operated according to safety rules and by licensed and trained individuals wearing protective gear like hard hats and high-visibility vests. The operator must perform pre-use checks of the forklift, drive safely following speed limits, and secure any loads being transported. Proper operation and parking procedures must always be followed to safely complete tasks and prevent accidents.
EVANNEX EcoHitch for Tesla Model S Install Guide Final
This document provides installation instructions for installing a 2" or 1.25" EcoHitch on a 2012-2016 Tesla Model S. The installation involves removing underbody panels, bumper fascia, and other components to access attachment points for the hitch. Detailed steps and diagrams are provided to guide removal and installation of over 20 components. Safety is emphasized throughout and it is recommended to have the installation performed by a professional.
cambiar el aceite a un motor
Changing the oil in your car involves 5 steps:
1. Gather the necessary supplies like an oil drain pan, wrenches, funnel, and new oil and oil filter. Position the car on a level surface.
2. Drain the old oil from the oil pan by loosening the drain plug and letting it fully drain into a container. Replace the drain plug when finished.
3. Remove the old oil filter using an oil filter wrench and coat the gasket of the new filter with oil before screwing it back into place.
4. Add new oil through the filler cap using a funnel. Replace the filler cap and check the oil level after starting the engine.
5.
EVANNEX Trunk Organizer for Tesla Model X
This document provides installation instructions for the Trunk OrganizerTM product for the Tesla Model X. It can be installed by simply placing it in the trunk well of the Model X without tools. The instructions list 5 quick steps: 1) remove the organizer from the box, 2) fold down rear seats and clear trunk well, 3) place organizer in trunk well with the higher side facing front, 4) add removable dividers as desired, and 5) fill organizer and replace trunk lid. The organizer is meant to provide storage solutions for items in the trunk well.
EVANNEX Rear Center Console for Tesla Model S Instructions
The document provides installation instructions for installing the RCCI rear center console in a Tesla Model S. It describes using a wire clothes hanger tool to pull a strap through the rear seat to attach the RCCI to an anchor bar accessible from the trunk. It then connects the front of the RCCI to the lower front edge of the rear seat with a strap and hook. Removal is the reverse process of undoing the straps. It also provides notes about matching wood veneers and ensuring the rear strap is securely attached for safety.
HILL START SLIDES
This document provides instructions for safely performing a hill start maneuver in a truck. It describes the risks of uncontrolled rolling back during a hill start and outlines the correct procedure to minimize roll back. The key steps are to engage the wheel lock, fully accelerate, pull the directional lever from park to drive once momentum is felt, and keep the accelerator flat until full traction is regained. Releasing the wheel lock or brakes too early can cause the truck to roll back, as can failing to engage the wheel lock before changing gears. Performing a hill start requires care and following the proper steps.
BlackVue Dash Cam Installation
This document provides step-by-step instructions for installing a Tesla dashcam, specifically a BlackVue DR650GW-2CH HD camera. It outlines gaining access to areas of the vehicle to route wires, running the camera power cable and rear camera cable through the headliner and footwell, and mounting the front camera below the rearview mirror. The installation takes approximately 4 hours and requires removing various plastic panels, using tools like a wire snake to push cables through tight spaces in the headliner, and cleanly managing the wires.
Bike maintainance level 1
This document provides instructions for setting up and maintaining a bicycle. It covers bike anatomy, sizing, fitting, wheel removal and installation, fixing flats, cassette removal and installation, brake maintenance, and front and rear derailleur indexing. The document includes diagrams and step-by-step instructions for these maintenance and repair tasks.
Tips for Off-Roading
Sit high to see the terrain ahead, engage all-wheel drive or switch to center differential when on trails to slow wheels and allow steady power over obstacles, and lower tire pressure for more traction on soft surfaces. Bring tow straps and floor mats in case stuck, and mats can help get unstuck on less serious issues. Know your vehicle's maximum incline to prevent damage, check water depths before crossing, and saw the steering wheel to create traction when lost.
How to change a tire
To change a blown tire:
1. Pull over to a safe, flat location, set the parking brake, and turn on your hazard lights.
2. Retrieve the jack, lug wrench, and spare tire from the trunk and loosen the lug nuts on the flat tire.
3. Jack up the car and remove the lug nuts and flat tire, then mount the spare tire and hand-tighten the lug nuts.
How to change brakes powerpoint
The document provides instructions for changing brake pads and rotors on a vehicle. It lists the necessary tools which include a jack, jack stands, lug wrench, sockets, C-clamp, combination wrench, gloves, air compressor, torque wrench, bungee cord, brake cleaner, new brake pads and rotors. The steps outlined are to raise the vehicle, remove the tire, push the piston into the caliper with a C-clamp, remove the caliper bolts and bracket, pull out the rotor, clean and install the new rotor and bracket, replace the brake pads and caliper, and reinstall the tire. Safety is emphasized throughout the process.
How to training series - changing a tire on the roadside
This document provides instructions for changing a flat tire on the roadside. It begins by describing a real situation where an IHG revenue manager named Steve had a flat tire while driving in Australia. It then outlines the 16 step process to change the tire that Steve followed after watching an instructional video. The steps include securing the vehicle, locating the spare tire and tools, jacking up the car, removing the lug nuts and flat tire, and installing the spare tire. The document concludes by testing the user's knowledge with a questionnaire and encouraging them to provide feedback on their experience.
How to change your tire
The document provides step-by-step instructions for changing a tire, beginning with finding a safe, flat place to change the tire and applying the parking brake. It details applying the jack under the frame near the flat tire, loosening and removing the nuts and tire, putting on the spare tire and tightening the nuts, and finally putting the flat tire in the trunk. The summary is completed in 14 steps.
How To Change A Tyre
To change a tire, you will need a jack, wheel wrench, spare tire, and clean cloth. First, park in a safe, level area away from traffic and turn on hazard lights. Use the wheel wrench to loosen the nuts, then jack up the vehicle at the indicated jacking point. Remove the nuts and tire, then mount the spare and tighten the nuts in a star pattern. Finally, lower the vehicle and fully tighten the nuts before stowing your tools.
2004 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2004 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2004 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2004 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2003 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2003 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2003 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2003 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2001 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2001 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2001 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2001 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2002 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2002 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2002 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2002 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Suspension system
The document provides instructions for replacing the front shock absorber on a vehicle. It first describes the purpose and function of shock absorbers, which use springs to determine vehicle posture and dampers to suppress vibration. It then gives step-by-step instructions for removing the old shock absorber, installing new bushings and grommets, placing the new shock absorber in position, and finishing up the installation. Tests for checking shock absorber condition are also described.
More Related Content
What's hot
Efficient Steps for Installation of the Wheel Hub Assembly
The wheel assembly is responsible for the smooth movement of your car. If you find that the wheel hub assembly is malfunctioning, then it is advised to get it replaced. You can do it all by yourself with some simple procedures like to prepare your car, remove the tires and brakes, remove the old wheel assembly, install the new wheel assembly, and at last evaluate the new assembly. See the mentioned slides to know the efficient steps for installation of the wheel hub assembly.
EVANNEX Glove Box Bumper Installation for Model S and X
This document provides installation instructions for a Glove Box Bumper product for Tesla Model S and Model X vehicles. It lists the necessary tools, which is just a tape measure or ruler. The instructions then describe a 3 step process for positioning and adhering the bumper to the inside of the glove box door using double-sided tape. The bumper is intended to improve storage efficiency in the glove box.
Window Control Covers
This document provides installation instructions for Window Control Covers for Tesla Model S and Model X vehicles. It begins with a disclaimer that the manufacturer is not responsible for any vehicle damage during installation or use of the product. It then lists the quick start installation steps, which include removing adhesive covers, adding extra adhesive strips to some pieces, positioning the covers and pressing firmly to adhere them. It notes that the smaller passenger side and rear covers install similarly without extra adhesive. The document concludes by stating the covers are intended for permanent installation but can be removed by prying, though the adhesive will be weakened and may not re-adhere properly.
7 safety techniques for operating a forklift
A forklift is a vehicle used to transport heavy and stored materials within a warehouse. It must always be operated according to safety rules and by licensed and trained individuals wearing protective gear like hard hats and high-visibility vests. The operator must perform pre-use checks of the forklift, drive safely following speed limits, and secure any loads being transported. Proper operation and parking procedures must always be followed to safely complete tasks and prevent accidents.
EVANNEX EcoHitch for Tesla Model S Install Guide Final
This document provides installation instructions for installing a 2" or 1.25" EcoHitch on a 2012-2016 Tesla Model S. The installation involves removing underbody panels, bumper fascia, and other components to access attachment points for the hitch. Detailed steps and diagrams are provided to guide removal and installation of over 20 components. Safety is emphasized throughout and it is recommended to have the installation performed by a professional.
cambiar el aceite a un motor
Changing the oil in your car involves 5 steps:
1. Gather the necessary supplies like an oil drain pan, wrenches, funnel, and new oil and oil filter. Position the car on a level surface.
2. Drain the old oil from the oil pan by loosening the drain plug and letting it fully drain into a container. Replace the drain plug when finished.
3. Remove the old oil filter using an oil filter wrench and coat the gasket of the new filter with oil before screwing it back into place.
4. Add new oil through the filler cap using a funnel. Replace the filler cap and check the oil level after starting the engine.
5.
EVANNEX Trunk Organizer for Tesla Model X
This document provides installation instructions for the Trunk OrganizerTM product for the Tesla Model X. It can be installed by simply placing it in the trunk well of the Model X without tools. The instructions list 5 quick steps: 1) remove the organizer from the box, 2) fold down rear seats and clear trunk well, 3) place organizer in trunk well with the higher side facing front, 4) add removable dividers as desired, and 5) fill organizer and replace trunk lid. The organizer is meant to provide storage solutions for items in the trunk well.
EVANNEX Rear Center Console for Tesla Model S Instructions
The document provides installation instructions for installing the RCCI rear center console in a Tesla Model S. It describes using a wire clothes hanger tool to pull a strap through the rear seat to attach the RCCI to an anchor bar accessible from the trunk. It then connects the front of the RCCI to the lower front edge of the rear seat with a strap and hook. Removal is the reverse process of undoing the straps. It also provides notes about matching wood veneers and ensuring the rear strap is securely attached for safety.
HILL START SLIDES
This document provides instructions for safely performing a hill start maneuver in a truck. It describes the risks of uncontrolled rolling back during a hill start and outlines the correct procedure to minimize roll back. The key steps are to engage the wheel lock, fully accelerate, pull the directional lever from park to drive once momentum is felt, and keep the accelerator flat until full traction is regained. Releasing the wheel lock or brakes too early can cause the truck to roll back, as can failing to engage the wheel lock before changing gears. Performing a hill start requires care and following the proper steps.
BlackVue Dash Cam Installation
This document provides step-by-step instructions for installing a Tesla dashcam, specifically a BlackVue DR650GW-2CH HD camera. It outlines gaining access to areas of the vehicle to route wires, running the camera power cable and rear camera cable through the headliner and footwell, and mounting the front camera below the rearview mirror. The installation takes approximately 4 hours and requires removing various plastic panels, using tools like a wire snake to push cables through tight spaces in the headliner, and cleanly managing the wires.
Bike maintainance level 1
This document provides instructions for setting up and maintaining a bicycle. It covers bike anatomy, sizing, fitting, wheel removal and installation, fixing flats, cassette removal and installation, brake maintenance, and front and rear derailleur indexing. The document includes diagrams and step-by-step instructions for these maintenance and repair tasks.
Tips for Off-Roading
Sit high to see the terrain ahead, engage all-wheel drive or switch to center differential when on trails to slow wheels and allow steady power over obstacles, and lower tire pressure for more traction on soft surfaces. Bring tow straps and floor mats in case stuck, and mats can help get unstuck on less serious issues. Know your vehicle's maximum incline to prevent damage, check water depths before crossing, and saw the steering wheel to create traction when lost.
What's hot (12)
Efficient Steps for Installation of the Wheel Hub Assembly
Efficient Steps for Installation of the Wheel Hub Assembly
EVANNEX Glove Box Bumper Installation for Model S and X
EVANNEX Glove Box Bumper Installation for Model S and X
EVANNEX EcoHitch for Tesla Model S Install Guide Final
EVANNEX EcoHitch for Tesla Model S Install Guide Final
EVANNEX Rear Center Console for Tesla Model S Instructions
EVANNEX Rear Center Console for Tesla Model S Instructions
Similar to Tire Change
How to change a tire
To change a blown tire:
1. Pull over to a safe, flat location, set the parking brake, and turn on your hazard lights.
2. Retrieve the jack, lug wrench, and spare tire from the trunk and loosen the lug nuts on the flat tire.
3. Jack up the car and remove the lug nuts and flat tire, then mount the spare tire and hand-tighten the lug nuts.
How to change brakes powerpoint
The document provides instructions for changing brake pads and rotors on a vehicle. It lists the necessary tools which include a jack, jack stands, lug wrench, sockets, C-clamp, combination wrench, gloves, air compressor, torque wrench, bungee cord, brake cleaner, new brake pads and rotors. The steps outlined are to raise the vehicle, remove the tire, push the piston into the caliper with a C-clamp, remove the caliper bolts and bracket, pull out the rotor, clean and install the new rotor and bracket, replace the brake pads and caliper, and reinstall the tire. Safety is emphasized throughout the process.
How to training series - changing a tire on the roadside
This document provides instructions for changing a flat tire on the roadside. It begins by describing a real situation where an IHG revenue manager named Steve had a flat tire while driving in Australia. It then outlines the 16 step process to change the tire that Steve followed after watching an instructional video. The steps include securing the vehicle, locating the spare tire and tools, jacking up the car, removing the lug nuts and flat tire, and installing the spare tire. The document concludes by testing the user's knowledge with a questionnaire and encouraging them to provide feedback on their experience.
How to change your tire
The document provides step-by-step instructions for changing a tire, beginning with finding a safe, flat place to change the tire and applying the parking brake. It details applying the jack under the frame near the flat tire, loosening and removing the nuts and tire, putting on the spare tire and tightening the nuts, and finally putting the flat tire in the trunk. The summary is completed in 14 steps.
How To Change A Tyre
To change a tire, you will need a jack, wheel wrench, spare tire, and clean cloth. First, park in a safe, level area away from traffic and turn on hazard lights. Use the wheel wrench to loosen the nuts, then jack up the vehicle at the indicated jacking point. Remove the nuts and tire, then mount the spare and tighten the nuts in a star pattern. Finally, lower the vehicle and fully tighten the nuts before stowing your tools.
2004 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2004 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2004 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2004 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2003 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2003 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2003 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2003 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2001 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2001 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2001 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2001 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
2002 HONDA ODYSSEY Service Repair Manual
This is the Highly Detailed factory service repair manual for the2002 HONDA ODYSSEY, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2002 HONDA ODYSSEY Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Maintenance
Engine
Control System
Mechanical
Fuel Service Specifications
Emission Control
Intake Exhaust Cooling
Lube
Ignition Starting Charging
Auto Transmission Clutch
Manual Transmission
Transfer Propeller Shaft
Drive Shaft
Differential
Axle Suspension
Tire & Wheel
Brake Control
Brake
Parking Brake
Steering Column
Power Steering
Air Condition
Suppl Restraint System
Seat Belt
Engine Immobilizer
Cruise Control
Wiper & Washer
Door Lock
Meter Audio/Visual
Horn
Windshield/Glass Mirror
Instrument Panel
Seat
Engine Hood/ Door
Exterior & Interior
Electrical
Multiplex/ Can Communication
And much more
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2002 HONDA ODYSSEY Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Suspension system
The document provides instructions for replacing the front shock absorber on a vehicle. It first describes the purpose and function of shock absorbers, which use springs to determine vehicle posture and dampers to suppress vibration. It then gives step-by-step instructions for removing the old shock absorber, installing new bushings and grommets, placing the new shock absorber in position, and finishing up the installation. Tests for checking shock absorber condition are also described.
Brake pads
Brake pads are wearing car parts located in the brake caliper that are subjected to high temperatures and wear during braking. The document provides instructions on how to check brake pads for wear and replace worn pads. It advises that front brake pads typically last 18,600-27,900 miles while rear pads last around 37,200 miles. The 8 step process for replacing pads involves loosening wheel bolts, pushing the piston back, removing the old pads, cleaning the caliper, inserting the new pads, and pressing the brake pedal to set the pads. Proper pad replacement ensures safe braking performance.
Hi Lift Jack Workshop for 4x4 Offroad Vehicles
Slides from a workshop detailing the correct use of a Hi Lift Jack for safe recovery during an offroad excursion.
Chapter 5 : Clutches and Brakes
The document discusses clutches and brakes. It describes the functions of clutches as engaging or disengaging components without starting or stopping the driver, and can provide slower engagement, quick engagement, overload protection, and prevention of accidental reversal. It discusses types of clutches including mechanical, electrical, and hydraulic clutches. It provides details on disassembling and reassembling clutches and brake components, and a checklist for clutch and brake maintenance procedures.
Changing Motorcycle Tires: A DIY Guide
You are all ready for a good ride with friends and fellow riders. You safety check your ride to make sure it is roadworthy, the front tire is flat. You are in luck, the tube inside the tire is the problem, not the tire, and you will only have to get a new inner tube. You decide to do the tire fix yourself.
nothing but awesome
The document provides step-by-step instructions for performing an engine tune-up, which includes checking and replacing the air filter and spark plugs. It discusses the procedures for removing and installing spark plugs, including inspecting, cleaning, and regapping new spark plugs. Similar procedures are outlined for checking and replacing the air filter and fuel filter. Indicators of when filters need replacement are also listed, such as reduced gas mileage or strange engine noises.
How To style A Plastic company Card
1) The document provides instructions for removing an old belt and installing a new one on a car.
2) It describes using a tensioner tool to loosen the tensioner and loop the new belt around pulleys.
3) It also emphasizes the importance of checking tire pressure regularly using a tire gauge.
Cycle
The document provides instructions for various bicycle maintenance tools and procedures, including:
1) Summarizes different hex/Allen keys, Torx keys, screwdrivers, spanners/wrenches, socket wrench sets, cone wrenches, pumps, valves, rubber repair kits, plastic rings, oil bottles, chain tools, and spoke wrenches that are useful for bicycle maintenance.
2) Describes how to patch a hole in an inner bicycle tire tube using sandpaper, glue, and a rubber patch from a repair kit.
3) Provides steps for removing and mounting a rear bicycle tire, including removing screws and spacers, taking the tire off the rim, finding
Brakes and Tires
This document provides information about brake systems, how to inspect brakes, and how to change tires. It discusses the components of disc and drum brakes and explains how brakes work to slow or stop a vehicle. Tips are given for brake inspection, such as checking for leaks and pad thickness. The process of changing a tire is outlined, including using wheel chocks for safety. Information is also given on tire wear indicators and disposal fees. The document promotes Crawford's Auto Repair and provides details on their services.
Note 5 maintenance component
Clutches and brakes transfer motion between mechanical components by engaging or disengaging. Clutches allow components to spin freely or stop rotation, while brakes only allow stopping of rotation. There are several types of clutches including friction, jaw, centrifugal, overrunning, torque limiting, and tooth clutches. Brakes work on the same principles as clutches but are designed only to stop rotation. Proper maintenance of clutches and brakes includes regular inspection and adjustment or replacement of worn components.
ONTAP - Vehicle Lift Safety
This document provides guidance on safely operating vehicle lifts. It emphasizes the importance of proper training, understanding lift capacities, identifying manufacturer-recommended lift points, and ensuring safety mechanisms like latches are engaged before working under a lifted vehicle. Key points covered include inspecting the vehicle and lift pads before raising, centering weight over the lift frame, avoiding overloading the lift, and never going under a vehicle unless it is fully supported.
Similar to Tire Change (20)
How to training series - changing a tire on the roadside
How to training series - changing a tire on the roadside
Recently uploaded
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Direct losses from downtime in 1 minute = $5-$10 thousand dollars. Reputation is priceless.
As part of the talk, we will consider the architectural strategies necessary for the development of highly loaded fintech solutions. We will focus on using queues and streaming to efficiently work and manage large amounts of data in real-time and to minimize latency.
We will focus special attention on the architectural patterns used in the design of the fintech system, microservices and event-driven architecture, which ensure scalability, fault tolerance, and consistency of the entire system.
Apps Break Data
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
Dandelion Hashtable: beyond billion requests per second on a commodity server
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Mutation Testing for Task-Oriented Chatbots
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Leveraging the Graph for Clinical Trials and Standards
Katja Glaß
OpenStudyBuilder Community Manager - Katja Glaß Consulting
Marius Conjeaud
Principal Consultant - Neo4j
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
High performance Serverless Java on AWS- GoTo Amsterdam 2024
Java is for many years one of the most popular programming languages, but it used to have hard times in the Serverless community. Java is known for its high cold start times and high memory footprint, comparing to other programming languages like Node.js and Python. In this talk I'll look at the general best practices and techniques we can use to decrease memory consumption, cold start times for Java Serverless development on AWS including GraalVM (Native Image) and AWS own offering SnapStart based on Firecracker microVM snapshot and restore and CRaC (Coordinated Restore at Checkpoint) runtime hooks. I'll also provide a lot of benchmarking on Lambda functions trying out various deployment package sizes, Lambda memory settings, Java compilation options and HTTP (a)synchronous clients and measure their impact on cold and warm start times.
GNSS spoofing via SDR (Criptored Talks 2024)
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
"Choosing proper type of scaling", Olena Syrota
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
Recently uploaded (20)
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
"$10 thousand per minute of downtime: architecture, queues, streaming and fin...
Dandelion Hashtable: beyond billion requests per second on a commodity server
Dandelion Hashtable: beyond billion requests per second on a commodity server
Leveraging the Graph for Clinical Trials and Standards
Leveraging the Graph for Clinical Trials and Standards
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectors
High performance Serverless Java on AWS- GoTo Amsterdam 2024
High performance Serverless Java on AWS- GoTo Amsterdam 2024
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan