Esp
•Download as DOCX, PDF•
0 likes•287 views
The document discusses key telecommunications infrastructure terms including a national fibre backbone, local loop connections to homes and businesses, global private Ethernet networks, and teledensity which measures telephone connections per capita.
Report
Share
Report
Share
Recommended
Ton Koonen Tu Eindhoven
Conferentie Greening the Enterprise,
IT Executive, 25 november 2009
Science meets IT
Wat heeft de Nederlandse wetenschap eigenlijk in de naaste toekomst te bieden op het gebied van duurzaamheid. Discussie met Nederlandse topwetenschappers Prof.ir. Ton Koonen en
Prof. dr. ir. Gerard Smit.
Moderator: Roel Croes (mede-oprichter en bestuurslid Stichting GreenICT)
Prof.ir. Ton Koonen (hoogleraar Technische Universiteit Eindhoven)
Prof. dr. ir. Gerard Smit (hoogleraar Universiteit Twente)
Media Concept and classification of Media
This document discusses different types of media used for data transmission and their characteristics. It describes guided media such as twisted pair cables, coaxial cables, and fiber optics, as well as unguided media like VSAT and satellites. It then explains several transmission characteristics including attenuation, noise, signal-to-noise ratio, and propagation delay.
Chapter03 a - network media
This document discusses networking basics, including the two main types of networks (circuit-switched and packet-switched), how data is transmitted over networks using baseband and broadband signaling, common factors that can distort transmissions like attenuation and interference, different types of transmission media like copper cables, fiber optic, and wireless, and the function of the network interface card.
12 14tes
Fiber optics use thin strands of glass called optical fibers to transmit light signals over long distances. Optical fibers have a core that carries the light and a cladding layer that reflects the light down the core. There are two main types: single-mode fibers that carry infrared laser light and multi-mode fibers that carry infrared LED light. A fiber-optic system includes a transmitter that produces light signals, optical fibers that conduct the signals, optional optical regenerators that boost weak signals, and receivers that decode the light signals back into electrical signals. Fiber optics have advantages over copper wire like being thinner, having higher data capacity, less signal degradation, and lower power requirements to transmit signals over long distances.
Fiber optics 1-4
Fiber optic links consist of a transmitter that converts an electrical signal to an optical signal using a laser or LED, a fiber optic cable to transmit the light, and a receiver that converts the light back to an electrical signal. The type of light source used, such as an LED or laser, depends on the speed and distance needed for the link. Proper power levels and low losses are required for an accurate signal at the receiver.
Week 3 basic network media
This document discusses basic network media and cabling types. It introduces common network terms and examines the physical aspects of connecting computers. The three primary cable types are coaxial, twisted-pair, and fiber-optic. Coaxial cable uses thinnet or thicknet variants and BNC connectors. Twisted-pair includes unshielded and shielded variants in categories that support different data speeds. Fiber-optic cable transmits data via light pulses and is immune to interference.
Utp & fiber 1
1) Structured cabling uses UTP cable with RJ45 connectors running between faceplates, patch panels, and patch cords to connect devices.
2) Fiber optic cabling uses glass fiber and connectors like SC, ST or LC run between fiber patch panels and fiber patch cords.
3) Proper cable installation, testing and maintenance following cabling rules ensures a high performance network infrastructure.
Brochure V3.6
Lemko's Node1 and Node2 products are 4G core network solutions that virtualize network functions and distribute them to cell sites, eliminating the need for channel-based backhaul. They provide low latency and support high data traffic, while simplifying network design and reducing total cost of ownership. The documents describe various models that support different cellular standards and can be configured for different power sources, environmental conditions, and interfaces.
Recommended
Ton Koonen Tu Eindhoven
Conferentie Greening the Enterprise,
IT Executive, 25 november 2009
Science meets IT
Wat heeft de Nederlandse wetenschap eigenlijk in de naaste toekomst te bieden op het gebied van duurzaamheid. Discussie met Nederlandse topwetenschappers Prof.ir. Ton Koonen en
Prof. dr. ir. Gerard Smit.
Moderator: Roel Croes (mede-oprichter en bestuurslid Stichting GreenICT)
Prof.ir. Ton Koonen (hoogleraar Technische Universiteit Eindhoven)
Prof. dr. ir. Gerard Smit (hoogleraar Universiteit Twente)
Media Concept and classification of Media
This document discusses different types of media used for data transmission and their characteristics. It describes guided media such as twisted pair cables, coaxial cables, and fiber optics, as well as unguided media like VSAT and satellites. It then explains several transmission characteristics including attenuation, noise, signal-to-noise ratio, and propagation delay.
Chapter03 a - network media
This document discusses networking basics, including the two main types of networks (circuit-switched and packet-switched), how data is transmitted over networks using baseband and broadband signaling, common factors that can distort transmissions like attenuation and interference, different types of transmission media like copper cables, fiber optic, and wireless, and the function of the network interface card.
12 14tes
Fiber optics use thin strands of glass called optical fibers to transmit light signals over long distances. Optical fibers have a core that carries the light and a cladding layer that reflects the light down the core. There are two main types: single-mode fibers that carry infrared laser light and multi-mode fibers that carry infrared LED light. A fiber-optic system includes a transmitter that produces light signals, optical fibers that conduct the signals, optional optical regenerators that boost weak signals, and receivers that decode the light signals back into electrical signals. Fiber optics have advantages over copper wire like being thinner, having higher data capacity, less signal degradation, and lower power requirements to transmit signals over long distances.
Fiber optics 1-4
Fiber optic links consist of a transmitter that converts an electrical signal to an optical signal using a laser or LED, a fiber optic cable to transmit the light, and a receiver that converts the light back to an electrical signal. The type of light source used, such as an LED or laser, depends on the speed and distance needed for the link. Proper power levels and low losses are required for an accurate signal at the receiver.
Week 3 basic network media
This document discusses basic network media and cabling types. It introduces common network terms and examines the physical aspects of connecting computers. The three primary cable types are coaxial, twisted-pair, and fiber-optic. Coaxial cable uses thinnet or thicknet variants and BNC connectors. Twisted-pair includes unshielded and shielded variants in categories that support different data speeds. Fiber-optic cable transmits data via light pulses and is immune to interference.
Utp & fiber 1
1) Structured cabling uses UTP cable with RJ45 connectors running between faceplates, patch panels, and patch cords to connect devices.
2) Fiber optic cabling uses glass fiber and connectors like SC, ST or LC run between fiber patch panels and fiber patch cords.
3) Proper cable installation, testing and maintenance following cabling rules ensures a high performance network infrastructure.
Brochure V3.6
Lemko's Node1 and Node2 products are 4G core network solutions that virtualize network functions and distribute them to cell sites, eliminating the need for channel-based backhaul. They provide low latency and support high data traffic, while simplifying network design and reducing total cost of ownership. The documents describe various models that support different cellular standards and can be configured for different power sources, environmental conditions, and interfaces.
Fiber optics 1-6
Ethernet has evolved from using coaxial cable to a star topology using hubs and switches connected by UTP cable or fiber optics. FDDI was the first standard developed for high-speed local area networks using fiber optics in a dual counter-rotating ring topology. IBM's ESCON network connected mainframe peripherals in a switched star architecture using fiber optics, starting at 4.5 MB/sec and increasing to 10 MB/sec. Today most large networks use fiber optics in the backbone and UTP cabling at the desktop, allowing speeds up to 100 Mbps to individual devices. Fiber optics is also used in cellular networks, wireless LANs, utility grids, security systems, building management, industrial process control,
Network media (cable)
This document discusses different types of network media that can be used to connect devices, including bounded and unbounded media. Bounded media uses physical cables like coaxial, twisted-pair, and fiber-optic cabling to transmit signals. Considerations for choosing a cable type include speed needs, number of devices, topology, cost, installation difficulty, bandwidth, and resistance to interference. Coaxial cable uses a central conductor surrounded by insulation and shielding, while twisted-pair cable comes in unshielded and shielded varieties. Fiber-optic cable transmits data through pulses of light down thin glass or plastic cores and has the highest bandwidth but also highest cost. Unbounded media uses wireless technologies like radio waves instead of
Transmission Media
This document defines and classifies different types of transmission media used for computer networks. It discusses bounded media such as twisted pair cable, coaxial cable, fiber optic, microwave, and infrared. It provides details on twisted pair cable, coaxial cable, infrared, microwaves, and fiber optic cable. It compares UTP and STP cables and discusses the advantages and disadvantages of each transmission medium. It acknowledges the teacher for support and lists references used.
Lecture 21
This document discusses different types of transmission media used in networking. It describes wired/guided media such as twisted pair cable, coaxial cable, and fiber optic cable. It explains that twisted pair cable is the most commonly used due to its low cost and ease of installation. The document also covers wireless/unguided media and provides examples of radio transmission and microwave transmission. It defines key terms related to transmission media and networking hardware, such as connectors like RJ11, RJ45, and BNC.
Local And Wide Area Networking (Networking Media - Physical Cable)
This document discusses several types of cabling used for computer networking. It describes coaxial cable, which uses a central conductor surrounded by insulating sheets and a protective jacket. It is an older technology not widely used now. Twisted pair cable is then discussed, which uses pairs of copper wires to transmit data and support standards like Ethernet. Different categories of twisted pair cable are explained with their characteristics and speed capabilities. Optical fiber is also summarized, explaining how it transmits data using light signals through a glass or plastic core instead of electrical signals. Wireless networking is briefly introduced as using wireless access points and network interface cards to transmit electromagnetic signals through the air.
Presentation
This document discusses different types of guided media, including twisted pair cable, coaxial cable, and fiber optic cable. It provides details on the characteristics of each type of cable, such as their uses, advantages, and disadvantages. Twisted pair cable is commonly used for short distance digital data transmission at speeds up to 9600 bits per second. Coaxial cable has higher bandwidth and can transmit signals over longer distances compared to twisted pair. Fiber optic cable has the highest bandwidth capability and is less susceptible to interference, but is the most expensive option.
Lemko X5T
The document introduces Lemko's X5TM High Power Portable Swarming Node system. The X5TM virtualizes the EPC and IMS core at each eNodeB, eliminating the need for data to traverse a centralized core. A single X5TM provides LTE voice, SMS, data and video coverage over 10 km. Multiple X5TM nodes can form a scalable in-band mesh network for larger coverage areas or higher capacity. The X5TM is compact, powerful, rugged and suitable for UAV/UAS deployments, providing up to 10 watts of power and 20 MHz of bandwidth.
Cabling
The document provides information about networking cables and their uses. It discusses:
- IP addresses and how they uniquely identify devices on the internet.
- Common cable types like twisted pair, coaxial, and fiber optic cables. It provides details on their characteristics and uses.
- Guidelines for properly installing cables, such as labeling, separation from interference, and using cable protectors on floor cables.
2019 types of network cables
2019 types of computer network or system network cables such as coaxial , Twisted Pair and Fiber Optic Cables , by eng. Osama Ghandour .
Internet
The document introduces the reader to the world of the internet. It states that the internet is a "network of networks" connecting many different systems around the world.
Internet
The document introduces the reader to the world of the internet. It states that the internet is a "network of networks" that connects millions of computers together globally. The document appears to be providing an introduction to what the internet is at a high level.
Medium for trasmission data hardware
This document discusses several types of media used for data transmission including:
- Twisted-pair cable which consists of two insulated copper wires twisted together and uses RJ45 connectors.
- Coaxial cable which has a central wire surrounded by insulation and a braided shield, used in cable TV and Ethernet networks.
- Fibre optic cable which uses glass or plastic strands to transmit data via light pulses and is as thin as a human hair.
- Radio waves and microwaves which transmit data at different frequency ranges and are used for wireless technologies like satellites, WiFi, and mobile networks.
- Modems which convert digital and analog signals to transmit data over telephone or cable lines.
Network Cabling
Network cabling is the medium used to transmit information between network devices. There are several types of cable used in local area networks (LANs) including unshielded twisted pair (UTP), fiber optic, and wireless. UTP is the most common and comes in categories that support different transmission speeds. Fiber optic cable can transmit signals over much longer distances than copper cables. Wireless networks use radio signals, infrared, or lasers to transmit information without cables but have disadvantages related to security and interference. Proper installation of network cables follows guidelines such as leaving slack, testing connections, and labeling cables.
Netwok cable(edisi bahasa kebangsan)
Network cables are used to connect network devices like computers, printers, and scanners to share resources and transfer data. Different cable types like twisted pair, fiber optic, and coaxial cables are used depending on the network's topology, protocol, size, and distance between devices. While wireless networking is increasingly popular, most computer networks today still use physical cables to transmit signals between points.
5. what is network cabling
The document discusses different types of network cabling used in local area networks (LANs), including unshielded twisted pair (UTP), shielded twisted pair (STP), coaxial cable, and fiber optic cable. It describes the characteristics of each cable type and notes that the choice depends on the network's topology, protocol, and size. Wireless LANs are also discussed, along with their advantages of mobility and easy setup, and disadvantages of security issues, interference, and inconsistent connections compared to wired networks.
Medium of transmission data by marwan inayat
This document discusses different types of transmission media including twisted pair cables, coaxial cables, fiber optics, microwave transmission, and satellite. It provides details on each medium, such as their advantages and disadvantages as well as common applications. Guided media like twisted pair, coaxial cable, and fiber optic cable provide a physical conduit for transmitting signals while unguided media like microwave and satellite transmit electromagnetic waves without a physical path.
networkmedia presentation1
Network media refers to the physical paths over which electrical signals travel between network components. There are two types of network transmission: bounded/guided transmission, where signals are confined to a specific path using cables like twisted-pair, coaxial, or fiber-optic; and unbound transmission, which extends beyond cabling and includes radio waves, microwaves, and infrared waves. Unbound transmission provides larger bandwidth and wide area capabilities but operates at very high frequencies. Common methods for reducing noise in network signals include signal averaging, analog filtering using passive low-pass and high-pass filters, and active filters which incorporate amplifying components.
01. network topologies & cable
The document discusses different network topologies including token ring, linear bus, star, and tree topologies. It also covers transmission media such as twisted pair, coaxial cable, and optical fiber. Key aspects summarized include that token ring networks use a ring topology with a token passing protocol to ensure only one device can transmit at a time, while star topologies connect devices through a central hub to isolate devices. Linear bus topologies use a main cable to connect all devices.
GUIDED MEDIA
this topic covered guided media including twisted pair cable, coaxial cable and fiber optic cable and their working process advantages and applications.
Overview of digital communication in HSN and Multimedia
Overview of digital communication in hsn, digital communication in multimedia and application, Overview of digital communication in high speeed networking, Overview of digital communication in hsn
Mobile Wallets in Kyrgyzstan and Kenya
e-MFP Rural Outreach and Innovation Action Group (ROI AG)
Webinar: Innovations in Rural Finance Series
Exploration of the technology specifics of CIS countries (especially Kyrgyzstan) and how this impacts innovation in rural finance. There will also be a discussion of why African or Latin American success stories may not be transposable to the CIS region and how the concept of these stories should be adapted to fit the CIS context.
Presented by:
• Etienne Mottet (Innovation Analyst, BFC)
http://roi.bfconsulting.com/
Базовый курс интернет маркетинга. День 1.
День 1.
Аудитория интернета
Термины интернет маркетинга
Тактики присутствия в интернете
More Related Content
What's hot
Fiber optics 1-6
Ethernet has evolved from using coaxial cable to a star topology using hubs and switches connected by UTP cable or fiber optics. FDDI was the first standard developed for high-speed local area networks using fiber optics in a dual counter-rotating ring topology. IBM's ESCON network connected mainframe peripherals in a switched star architecture using fiber optics, starting at 4.5 MB/sec and increasing to 10 MB/sec. Today most large networks use fiber optics in the backbone and UTP cabling at the desktop, allowing speeds up to 100 Mbps to individual devices. Fiber optics is also used in cellular networks, wireless LANs, utility grids, security systems, building management, industrial process control,
Network media (cable)
This document discusses different types of network media that can be used to connect devices, including bounded and unbounded media. Bounded media uses physical cables like coaxial, twisted-pair, and fiber-optic cabling to transmit signals. Considerations for choosing a cable type include speed needs, number of devices, topology, cost, installation difficulty, bandwidth, and resistance to interference. Coaxial cable uses a central conductor surrounded by insulation and shielding, while twisted-pair cable comes in unshielded and shielded varieties. Fiber-optic cable transmits data through pulses of light down thin glass or plastic cores and has the highest bandwidth but also highest cost. Unbounded media uses wireless technologies like radio waves instead of
Transmission Media
This document defines and classifies different types of transmission media used for computer networks. It discusses bounded media such as twisted pair cable, coaxial cable, fiber optic, microwave, and infrared. It provides details on twisted pair cable, coaxial cable, infrared, microwaves, and fiber optic cable. It compares UTP and STP cables and discusses the advantages and disadvantages of each transmission medium. It acknowledges the teacher for support and lists references used.
Lecture 21
This document discusses different types of transmission media used in networking. It describes wired/guided media such as twisted pair cable, coaxial cable, and fiber optic cable. It explains that twisted pair cable is the most commonly used due to its low cost and ease of installation. The document also covers wireless/unguided media and provides examples of radio transmission and microwave transmission. It defines key terms related to transmission media and networking hardware, such as connectors like RJ11, RJ45, and BNC.
Local And Wide Area Networking (Networking Media - Physical Cable)
This document discusses several types of cabling used for computer networking. It describes coaxial cable, which uses a central conductor surrounded by insulating sheets and a protective jacket. It is an older technology not widely used now. Twisted pair cable is then discussed, which uses pairs of copper wires to transmit data and support standards like Ethernet. Different categories of twisted pair cable are explained with their characteristics and speed capabilities. Optical fiber is also summarized, explaining how it transmits data using light signals through a glass or plastic core instead of electrical signals. Wireless networking is briefly introduced as using wireless access points and network interface cards to transmit electromagnetic signals through the air.
Presentation
This document discusses different types of guided media, including twisted pair cable, coaxial cable, and fiber optic cable. It provides details on the characteristics of each type of cable, such as their uses, advantages, and disadvantages. Twisted pair cable is commonly used for short distance digital data transmission at speeds up to 9600 bits per second. Coaxial cable has higher bandwidth and can transmit signals over longer distances compared to twisted pair. Fiber optic cable has the highest bandwidth capability and is less susceptible to interference, but is the most expensive option.
Lemko X5T
The document introduces Lemko's X5TM High Power Portable Swarming Node system. The X5TM virtualizes the EPC and IMS core at each eNodeB, eliminating the need for data to traverse a centralized core. A single X5TM provides LTE voice, SMS, data and video coverage over 10 km. Multiple X5TM nodes can form a scalable in-band mesh network for larger coverage areas or higher capacity. The X5TM is compact, powerful, rugged and suitable for UAV/UAS deployments, providing up to 10 watts of power and 20 MHz of bandwidth.
Cabling
The document provides information about networking cables and their uses. It discusses:
- IP addresses and how they uniquely identify devices on the internet.
- Common cable types like twisted pair, coaxial, and fiber optic cables. It provides details on their characteristics and uses.
- Guidelines for properly installing cables, such as labeling, separation from interference, and using cable protectors on floor cables.
2019 types of network cables
2019 types of computer network or system network cables such as coaxial , Twisted Pair and Fiber Optic Cables , by eng. Osama Ghandour .
Internet
The document introduces the reader to the world of the internet. It states that the internet is a "network of networks" connecting many different systems around the world.
Internet
The document introduces the reader to the world of the internet. It states that the internet is a "network of networks" that connects millions of computers together globally. The document appears to be providing an introduction to what the internet is at a high level.
Medium for trasmission data hardware
This document discusses several types of media used for data transmission including:
- Twisted-pair cable which consists of two insulated copper wires twisted together and uses RJ45 connectors.
- Coaxial cable which has a central wire surrounded by insulation and a braided shield, used in cable TV and Ethernet networks.
- Fibre optic cable which uses glass or plastic strands to transmit data via light pulses and is as thin as a human hair.
- Radio waves and microwaves which transmit data at different frequency ranges and are used for wireless technologies like satellites, WiFi, and mobile networks.
- Modems which convert digital and analog signals to transmit data over telephone or cable lines.
Network Cabling
Network cabling is the medium used to transmit information between network devices. There are several types of cable used in local area networks (LANs) including unshielded twisted pair (UTP), fiber optic, and wireless. UTP is the most common and comes in categories that support different transmission speeds. Fiber optic cable can transmit signals over much longer distances than copper cables. Wireless networks use radio signals, infrared, or lasers to transmit information without cables but have disadvantages related to security and interference. Proper installation of network cables follows guidelines such as leaving slack, testing connections, and labeling cables.
Netwok cable(edisi bahasa kebangsan)
Network cables are used to connect network devices like computers, printers, and scanners to share resources and transfer data. Different cable types like twisted pair, fiber optic, and coaxial cables are used depending on the network's topology, protocol, size, and distance between devices. While wireless networking is increasingly popular, most computer networks today still use physical cables to transmit signals between points.
5. what is network cabling
The document discusses different types of network cabling used in local area networks (LANs), including unshielded twisted pair (UTP), shielded twisted pair (STP), coaxial cable, and fiber optic cable. It describes the characteristics of each cable type and notes that the choice depends on the network's topology, protocol, and size. Wireless LANs are also discussed, along with their advantages of mobility and easy setup, and disadvantages of security issues, interference, and inconsistent connections compared to wired networks.
Medium of transmission data by marwan inayat
This document discusses different types of transmission media including twisted pair cables, coaxial cables, fiber optics, microwave transmission, and satellite. It provides details on each medium, such as their advantages and disadvantages as well as common applications. Guided media like twisted pair, coaxial cable, and fiber optic cable provide a physical conduit for transmitting signals while unguided media like microwave and satellite transmit electromagnetic waves without a physical path.
networkmedia presentation1
Network media refers to the physical paths over which electrical signals travel between network components. There are two types of network transmission: bounded/guided transmission, where signals are confined to a specific path using cables like twisted-pair, coaxial, or fiber-optic; and unbound transmission, which extends beyond cabling and includes radio waves, microwaves, and infrared waves. Unbound transmission provides larger bandwidth and wide area capabilities but operates at very high frequencies. Common methods for reducing noise in network signals include signal averaging, analog filtering using passive low-pass and high-pass filters, and active filters which incorporate amplifying components.
01. network topologies & cable
The document discusses different network topologies including token ring, linear bus, star, and tree topologies. It also covers transmission media such as twisted pair, coaxial cable, and optical fiber. Key aspects summarized include that token ring networks use a ring topology with a token passing protocol to ensure only one device can transmit at a time, while star topologies connect devices through a central hub to isolate devices. Linear bus topologies use a main cable to connect all devices.
GUIDED MEDIA
this topic covered guided media including twisted pair cable, coaxial cable and fiber optic cable and their working process advantages and applications.
Overview of digital communication in HSN and Multimedia
Overview of digital communication in hsn, digital communication in multimedia and application, Overview of digital communication in high speeed networking, Overview of digital communication in hsn
What's hot (20)
Local And Wide Area Networking (Networking Media - Physical Cable)
Local And Wide Area Networking (Networking Media - Physical Cable)
Overview of digital communication in HSN and Multimedia
Overview of digital communication in HSN and Multimedia
Viewers also liked
Mobile Wallets in Kyrgyzstan and Kenya
e-MFP Rural Outreach and Innovation Action Group (ROI AG)
Webinar: Innovations in Rural Finance Series
Exploration of the technology specifics of CIS countries (especially Kyrgyzstan) and how this impacts innovation in rural finance. There will also be a discussion of why African or Latin American success stories may not be transposable to the CIS region and how the concept of these stories should be adapted to fit the CIS context.
Presented by:
• Etienne Mottet (Innovation Analyst, BFC)
http://roi.bfconsulting.com/
Базовый курс интернет маркетинга. День 1.
День 1.
Аудитория интернета
Термины интернет маркетинга
Тактики присутствия в интернете
ICT Development in Kyrgyzstan - Presentation for University of Washington
The document discusses information and communication technology (ICT) development in Kyrgyzstan. It provides an overview of the current situation of ICT and telecommunications in the country, including government policies to support the industry and statistics on mobile, internet, and fixed telephone access. The document outlines Kyrgyzstan's goals to modernize its telecommunications network through projects that expand telephone access to rural areas, install fiber optic infrastructure, and advance the overall development of the technology industry in support of an information society.
Laser Communication
The document discusses the current fiber optic backbone network in the US and upgrades that have been done to extend its reach and increase bandwidth capabilities. While most recent fiber laying efforts have focused on extending the backbone to new central offices, only 5% of buildings have a direct connection, though over 75% are within a mile of the backbone. The document then shifts to discussing wireless optical communication technologies for providing high bandwidth wireless network connectivity as an alternative to laying new fiber lines.
Sonet Sdh Dwdm
SONET/SDH are digital fiber optic transmission standards developed independently in the US and Europe to transmit data at high speeds over fiber optic cables. SONET defines a hierarchy of electrical signaling levels called STS and uses synchronous TDM multiplexing. It can transmit data from 155 Mbps to 2.5 Gbps and supports ring topologies. SONET defines layers for signal transmission including path, line, section and physical layers. SDH is the international version of SONET and uses similar framing and network elements like multiplexers, regenerators and cross-connects to transmit digital signals over fiber optic networks. DWDM further increases fiber capacity by transmitting multiple wavelengths/channels over the same fiber using wavelength division
The Top Skills That Can Get You Hired in 2017
We analyzed all the recruiting activity on LinkedIn this year and identified the Top Skills employers seek. Starting Oct 24, learn these skills and much more for free during the Week of Learning.
#AlwaysBeLearning https://learning.linkedin.com/week-of-learning
Viewers also liked (6)
ICT Development in Kyrgyzstan - Presentation for University of Washington
ICT Development in Kyrgyzstan - Presentation for University of Washington
Recently uploaded
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
When it comes to unit testing in the .NET ecosystem, developers have a wide range of options available. Among the most popular choices are NUnit, XUnit, and MSTest. These unit testing frameworks provide essential tools and features to help ensure the quality and reliability of code. However, understanding the differences between these frameworks is crucial for selecting the most suitable one for your projects.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
Finale of the Year: Apply for Next One!
Presentation for the event called "Finale of the Year: Apply for Next One!" organized by GDSC PJATK
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Recently uploaded (20)
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
Nunit vs XUnit vs MSTest Differences Between These Unit Testing Frameworks.pdf
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Esp
- 1. National fibre backbone Local loop Global Ethernet Teledensity