The document summarizes an experiment to determine how much more a landlord pays to heat an apartment to 70 degrees rather than 60 degrees over winter. Data on furnace run times and outdoor temperatures was collected over several days at both temperatures. Calculations estimate the landlord pays an extra $15.38 per month to heat the apartment to 70 degrees for the tenant's evening hours based on an average outside temperature of 30 degrees. Limitations in the data collection methods are acknowledged.
GEORG Geothermal Workshop 2016 SESSION B2, Midstream. Presentation title: Feasibility study for utilizing an ORC cycle to cool medium temperature geothermal fluid to appropriate temperature for use at Seltjarnarnes district heating
Thermal Analysis of Passive Radiator for Inter Planetary Space ApplicationsShailesh Rajput
The study aims to appraise the merits of using Passive Radiators for Interplanetary Space Applications as it draws no power from the satellite system, and measuring its Effectiveness in Dissipating the heat developed inside the payload to space against Environmental Backloads incident over its surface from the Celestial Surroundings.
It maintains the desired temperature range by Controlling Conductive and Radiative Heat Paths through the selection of Geometrical Configurations and Thermo-Optical Properties of the surface in addition to savings in Mass and Power respectively which has always been a crucial element in spacecraft design and configuration.
A Parametric study is conducted to explore the scopes of using Passive Radiators. The entire system is Modelled and Simulated in FEA software UG NX 7.5 with a Flat Plate Radiator used in the initial Space Thermal Analysis. Correlations between Heat Transfer Capacity, Thermal Backloads, Radiator Area and the Operating Temperature are investigated to provide Design Guidelines for Consistent and Predictable Performance with minimum Degradation in a thermally stable orbit.
Jean-Paul Gibson: Transient Heat Conduction in a Semi-Infinite Plate Compare...Jean-Paul Gibson
The final project for a Thermo/Fluids Lab I took in school. A 12" long stainless rod was heated until six thermocouples attached to it all read 400K. The rod was then allowed to cool for 10 minutes while taking the temperature reading for each thermocouple every 30 seconds. ANSYS was used to compare the variance of actual temperatures as tested to what the theoretical values should be.
Webster Engineering, a leader in burner manufacturing and combustion control, now offers a combustion air temperature trim system that should give you a 2-3% savings in your fuel bill. With out the cost and complexity of a conventional O2 trim system.
GEORG Geothermal Workshop 2016 SESSION B2, Midstream. Presentation title: Feasibility study for utilizing an ORC cycle to cool medium temperature geothermal fluid to appropriate temperature for use at Seltjarnarnes district heating
Thermal Analysis of Passive Radiator for Inter Planetary Space ApplicationsShailesh Rajput
The study aims to appraise the merits of using Passive Radiators for Interplanetary Space Applications as it draws no power from the satellite system, and measuring its Effectiveness in Dissipating the heat developed inside the payload to space against Environmental Backloads incident over its surface from the Celestial Surroundings.
It maintains the desired temperature range by Controlling Conductive and Radiative Heat Paths through the selection of Geometrical Configurations and Thermo-Optical Properties of the surface in addition to savings in Mass and Power respectively which has always been a crucial element in spacecraft design and configuration.
A Parametric study is conducted to explore the scopes of using Passive Radiators. The entire system is Modelled and Simulated in FEA software UG NX 7.5 with a Flat Plate Radiator used in the initial Space Thermal Analysis. Correlations between Heat Transfer Capacity, Thermal Backloads, Radiator Area and the Operating Temperature are investigated to provide Design Guidelines for Consistent and Predictable Performance with minimum Degradation in a thermally stable orbit.
Jean-Paul Gibson: Transient Heat Conduction in a Semi-Infinite Plate Compare...Jean-Paul Gibson
The final project for a Thermo/Fluids Lab I took in school. A 12" long stainless rod was heated until six thermocouples attached to it all read 400K. The rod was then allowed to cool for 10 minutes while taking the temperature reading for each thermocouple every 30 seconds. ANSYS was used to compare the variance of actual temperatures as tested to what the theoretical values should be.
Webster Engineering, a leader in burner manufacturing and combustion control, now offers a combustion air temperature trim system that should give you a 2-3% savings in your fuel bill. With out the cost and complexity of a conventional O2 trim system.
Integrated Home Systems - Chapter 6 - Controlling Heating with IHSLeonardo ENERGY
Despite the fact that modern Integrated Home Systems (IHS) are perfectly capable of controlling a home’s heating system, we find that in practice this is often not the case. The reason for this is often more of a human and organizational nature rather than of a technical nature. Installers of IHS systems and heating often do not understand each other’s work, as a result of which prejudices are played out to avoid having to integrate. The heating specialist, for example, quickly thinks his earnings will be reduced from the moment the IHS system starts controlling the heating. We will see that this is seldom the case.
A second delicate point is that of responsibility. Who should be contacted when the heating is not working properly? Attention will have to be devoted to this point if integration is to be successfully achieved. The heating fitter typically fears they will no longer be able to perform fault analyses as a result of IHS control. Nothing is further from the truth.
In this chapter of the Integrated Home Systems course we will first look at the basic characteristics of a central heating system. We will then examine control via IHS. With the help of this chapter you should be able to enter into a conversation with the heating specialist. On the one hand, the purpose of that conversation will be to build a relationship of trust between both parties, and on the other to gather the necessary information (for both parties) to achieve a sound integration.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
More Related Content
Similar to Energy Consumption Project - Ryan Miller
Integrated Home Systems - Chapter 6 - Controlling Heating with IHSLeonardo ENERGY
Despite the fact that modern Integrated Home Systems (IHS) are perfectly capable of controlling a home’s heating system, we find that in practice this is often not the case. The reason for this is often more of a human and organizational nature rather than of a technical nature. Installers of IHS systems and heating often do not understand each other’s work, as a result of which prejudices are played out to avoid having to integrate. The heating specialist, for example, quickly thinks his earnings will be reduced from the moment the IHS system starts controlling the heating. We will see that this is seldom the case.
A second delicate point is that of responsibility. Who should be contacted when the heating is not working properly? Attention will have to be devoted to this point if integration is to be successfully achieved. The heating fitter typically fears they will no longer be able to perform fault analyses as a result of IHS control. Nothing is further from the truth.
In this chapter of the Integrated Home Systems course we will first look at the basic characteristics of a central heating system. We will then examine control via IHS. With the help of this chapter you should be able to enter into a conversation with the heating specialist. On the one hand, the purpose of that conversation will be to build a relationship of trust between both parties, and on the other to gather the necessary information (for both parties) to achieve a sound integration.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
8. Data Collected http:// spreadsheets.google.com/pub?key=pI7xEJgzMJemnkfIyVIxHUA Energy Consumption Project Date Research start time Research end time Thermostat setting min Inside temp max Inside temp Outside temp furnice turns on furnice turns off furnice time on time between intervals November 25, 2008 8:00 11:40 66 66 69 40 8:38 8:50 0:12 66 69 39 9:28 9:38 0:10 0:38 66 69 39 10:25 10:36 0:11 0:47 66 69 39 11:21 11:33 0:12 0:45 November 26, 2008 10:43 1:32 71 71 74 40 10:31 10:43 0:12 71 74 40 11:21 11:31 0:10 0:38 71 74 40 12:17 12:28 0:11 0:46 71 74 40 1:21 1:31 0:10 0:53 November 27, 2008 10:11 61 60 64 40 10:11 10:21 0:10 by 1:45 didn't turn back on 5:50 9:05 61 61 61 41 never turned on December 1, 2008 8:30 10:22 70 69 71 32 8:45 8:58 0:13 10:10 10:20 0:10 1:12 December 7, 2008 9:00 69 68 72 40 9:15 9:27 0:12 69 68 72 40 10:41 10:54 0:13 1:14 December 16,2008 8:19 60 60 62 28 8:19 8:31 0:12 60 60 62 30 9:27 9:39 0:12 0:56 60 60 62 31 10:49 11:00 0:11 1:10 60 60 62 36 12:15 12:26 0:11 1:15 December 17, 2008 7:00 70 70 74 23 9:00 9:13 0:13 9:50 10:03 0:13 0:37 10:39 10:51 0:12 0:36 11:32 11:44 0:12 0:41
9. Data collected (zoomed in) Outside temp furnace turns on furnace turns off furnace time on time between Furnace off/0n 40 8:38 8:50 0:12 39 9:28 9:38 0:10 0:38 39 10:25 10:36 0:11 0:47 39 11:21 11:33 0:12 0:45 40 10:31 10:43 0:12 40 11:21 11:31 0:10 0:38 40 12:17 12:28 0:11 0:46 40 1:21 1:31 0:10 0:53
10.
11.
12. How Fuel Consumption was Calculated Note: The .6 represents the amount of fuel (in gallons) the regulator on the furnace burns per hour.
13.
14.
15. Finding fuel consumed per Hour Using the plotted points, slope was calculated using the following equation: Inside Temperature Outside Temperature Slope (gas consumed/hour) 70 degrees 20 degrees .1224 60 degrees 30 degrees .0846 68 degrees 40 degrees .0929 70 degrees 40 degrees .1156
16. Using the slope to find extra fuel consumed over a month (4 hours a day) Averaging the two rows for Inside Temp of 70 degrees: I’m saving 14.28 – 10.2 = 4.1 gallons keeping the temperature at 60 instead of 70 degrees, when the outside temperature is around 30 degrees. Inside Temperature Outside Temperature Slope (gas consumed/hour) Gas Consumed (one month) 70 degrees 20 degrees .1224 14.7 60 degrees 30 degrees .0846 10.2 68 degrees 40 degrees .0924 11.1 70 degrees 40 degrees .1156 13.9 70 degrees 30 degrees .1190 14.28
17.
18.
19. Since I’m at it…. How much is my landlord paying a month to heat my place for those other 20 hours. Averaging the two rows for Inside Temp of 70 degrees: Inside Temperature Outside Temperature Slope (gas consumed/hour) Gas Consumed (one month) 70 degrees 20 degrees .1224 73.4 60 degrees 30 degrees .0846 50.8 68 degrees 40 degrees .0924 55.4 70 degrees 40 degrees .1156 69.3 70 degrees 30 degrees .1190 71.4