Employee manual time card
•
2 likes•655 views
This document appears to be a timesheet tracking hours worked on a project over several weeks by an individual in different roles including as a site foreman, engineer, and project manager. It shows the number of days and hours logged each week from weeks 1 through 5, along with signatures from the site foreman, engineer, and project manager.
Report
Share
Report
Share
Download to read offline
Recommended
Gantt Chart
This document outlines the schedule for a construction project from schematic design through completion. It includes phases for design, authority submissions, contract documentation, construction such as site works, structural work and building works, interior design, landscape work, and project completion over a period of 65 weeks from 2018 to 2020. Key milestones include schematic design, design development, submission for planning approval, tender award, practical completion of works, and project handover.
1Q06 Results Presentation
The document discusses a company's financial performance and position. It reported a net loss for the period due to lower sales and higher costs. However, it had positive cash flow from operations due to reductions in inventory and receivables. The company has taken actions to improve its financial position, such as reducing costs and delaying some payments.
Retargets control
The document analyzes retarget impacts across multiple projects from September 2007 to February 2008. It shows that projects with retargets took more days and duration to complete compared to projects without retargets. Project F saw the largest impact with more than 4 retargets extending the duration by 800%. Overall, most implemented projects and local projects saw retargets, while regional projects and projects without retargets were less common.
Suburban Steel Maintenance Building Presentation
This is a presentation that was prepared for my Estimating Class on the Suburban Steel Maintenance Building.
GENAIR - MAIN EXTRACTION SYSTEM
This document contains plans and 3D views of a main extraction system for a building project located at Cnr of Menirva and Renico Crescent, Lea Glen, Johannesburg. The plans include a plan view on level +7389, a plan view showing base plate positions, and a 3D view of the system. Key elements labeled include REM5, REM10, REM11, REM12, REM13, REM21, REM22, REM23, and REM24.
Dos lagos 112111 sheet - a601-01 - wall sections
This document contains a wall section drawing showing three levels - a ground level at 0', a second level at 10', and a roof level at 19'. It includes labels for the scale of 3/8" = 1'-0", the date and time of 1/28/2013 4:14:45 PM, the sheet name of Wall Sections, and was drawn by an instructor for a project called DOS LAGOS using Autodesk Revit software.
Resource Levelling - PMBOK - Example
This document contains a Gantt chart showing the scheduling and resource allocation for a construction project. The chart shows the activities, their durations, start and finish dates, and the laborers assigned to each activity on each day. It also shows the project undergoing three levels of scheduling - before leveling, intermediate leveling, and after complete leveling - to optimize the resource allocation and reduce float. The total project duration is 18 days.
Planos tecnicos
This document contains engineering drawings across 3 sheets. Sheet 1 provides overall dimensions for a design and calls out details A and B to be shown at increased scales on further sheets. Sheet 2 contains enlarged detail views of sections A and B at the specified scales. Sheet 3 provides a section view of detail D-D at a scale of 1:1 and includes no other information.
Recommended
Gantt Chart
This document outlines the schedule for a construction project from schematic design through completion. It includes phases for design, authority submissions, contract documentation, construction such as site works, structural work and building works, interior design, landscape work, and project completion over a period of 65 weeks from 2018 to 2020. Key milestones include schematic design, design development, submission for planning approval, tender award, practical completion of works, and project handover.
1Q06 Results Presentation
The document discusses a company's financial performance and position. It reported a net loss for the period due to lower sales and higher costs. However, it had positive cash flow from operations due to reductions in inventory and receivables. The company has taken actions to improve its financial position, such as reducing costs and delaying some payments.
Retargets control
The document analyzes retarget impacts across multiple projects from September 2007 to February 2008. It shows that projects with retargets took more days and duration to complete compared to projects without retargets. Project F saw the largest impact with more than 4 retargets extending the duration by 800%. Overall, most implemented projects and local projects saw retargets, while regional projects and projects without retargets were less common.
Suburban Steel Maintenance Building Presentation
This is a presentation that was prepared for my Estimating Class on the Suburban Steel Maintenance Building.
GENAIR - MAIN EXTRACTION SYSTEM
This document contains plans and 3D views of a main extraction system for a building project located at Cnr of Menirva and Renico Crescent, Lea Glen, Johannesburg. The plans include a plan view on level +7389, a plan view showing base plate positions, and a 3D view of the system. Key elements labeled include REM5, REM10, REM11, REM12, REM13, REM21, REM22, REM23, and REM24.
Dos lagos 112111 sheet - a601-01 - wall sections
This document contains a wall section drawing showing three levels - a ground level at 0', a second level at 10', and a roof level at 19'. It includes labels for the scale of 3/8" = 1'-0", the date and time of 1/28/2013 4:14:45 PM, the sheet name of Wall Sections, and was drawn by an instructor for a project called DOS LAGOS using Autodesk Revit software.
Resource Levelling - PMBOK - Example
This document contains a Gantt chart showing the scheduling and resource allocation for a construction project. The chart shows the activities, their durations, start and finish dates, and the laborers assigned to each activity on each day. It also shows the project undergoing three levels of scheduling - before leveling, intermediate leveling, and after complete leveling - to optimize the resource allocation and reduce float. The total project duration is 18 days.
Planos tecnicos
This document contains engineering drawings across 3 sheets. Sheet 1 provides overall dimensions for a design and calls out details A and B to be shown at increased scales on further sheets. Sheet 2 contains enlarged detail views of sections A and B at the specified scales. Sheet 3 provides a section view of detail D-D at a scale of 1:1 and includes no other information.
Training confined space entry holewatch man [compatibility mode]
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuation
Risk assessment for testing & commissioning of cranes
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Electricity, Electrical Safety, Electrocution,
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.
Drivign permit form
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.
Defensive driving azmeel
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.
Weekly welding machine checklist
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.
Weekly scaffolding checklist
A weekly scaffolding inspection checklist was completed for a construction site. The competent person inspected the scaffolding's tag and information, bracing, clamps, ties, safety rails, platforms, planks, and ladders. Any issues were noted as good or poor. The inspection ensures the scaffolding is properly constructed and maintained for worker safety.
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
Weekly first aid room checklist
The weekly first aid room checklist documents 15 items to be inspected in the first aid room including medical waste bins, beds, toiletries, equipment, and appliances. The form is to be completed by the project male nurse, concurred by the safety manager, and returned at the end of the week to the contractor safety manager.
Weekly excavation checklist
This weekly inspection checklist documents an excavation site inspection. It lists the competent person who performed the inspection, the excavation location and date. It then lists 15 items that were checked for safety compliance, including daily inspections of the excavation and adjacent areas, use of proper PPE, adequate sloping or shoring of deep excavations, and protections from falling material, water accumulation, and cave-ins. Upon completion of the inspection, the contractor supervisor signs off to confirm the excavation meets safety standards.
Weekly ambulance checklist
This document contains a weekly ambulance checklist for Association of Abu-Nayyan, Azmeel & Saudi Tumpane dated [DATE]. It lists 47 items related to the general vehicle components, engine compartment, and underside that are inspected for an ambulance with Make [MAKE] and Model [MODEL]. The inspected ambulance is designated to Nurse Mahdi Ameen Jaffar and driven by Mr. Hilal Sha. The checklist notes the condition of each item as good, fair, needing repair, or not applicable. Signatures are included from the inspector, driver, nurse, and safety manager to acknowledge the inspection.
Weekly air compressor check list
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.
Water tanker log sheet
This document is a log sheet to record water tanker details for filling a test water tank. It contains columns to note the date, time in, time out, quantity of water filled, driver details, tanker registration number, and representatives from the client and contractor who witnessed the filling. The total time taken to fill the tank is also recorded.
Water cooler monthly
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.
Vehicle plant daily inspection log
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.
Toilet cleaning check list
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.
Scissor lift 2 daily inspection log
The document is a checklist for inspecting a scissor lift. It contains questions to check for debris, overhead obstructions, the work surface's ability to support the lift, and the environment's suitability. It also has sections to check that required personal protective equipment is available and in good condition, that the operator is trained and authorized, and that the overall machine condition is acceptable. Additional sections check that ground and platform controls function properly, emergency controls work from the ground, outriggers function if equipped, lug nuts are tight, cables and wires are secure, guardrails are in good condition, and placards/warnings are legible. The checklist also prompts inspecting fluid levels, for leaks, loose/missing parts
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
More Related Content
More from Azmeel Contracting Company
Training confined space entry holewatch man [compatibility mode]
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuation
Risk assessment for testing & commissioning of cranes
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.com
Electricity, Electrical Safety, Electrocution,
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.
Drivign permit form
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.
Defensive driving azmeel
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.
Weekly welding machine checklist
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.
Weekly scaffolding checklist
A weekly scaffolding inspection checklist was completed for a construction site. The competent person inspected the scaffolding's tag and information, bracing, clamps, ties, safety rails, platforms, planks, and ladders. Any issues were noted as good or poor. The inspection ensures the scaffolding is properly constructed and maintained for worker safety.
Weekly generator check list
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.
Weekly first aid room checklist
The weekly first aid room checklist documents 15 items to be inspected in the first aid room including medical waste bins, beds, toiletries, equipment, and appliances. The form is to be completed by the project male nurse, concurred by the safety manager, and returned at the end of the week to the contractor safety manager.
Weekly excavation checklist
This weekly inspection checklist documents an excavation site inspection. It lists the competent person who performed the inspection, the excavation location and date. It then lists 15 items that were checked for safety compliance, including daily inspections of the excavation and adjacent areas, use of proper PPE, adequate sloping or shoring of deep excavations, and protections from falling material, water accumulation, and cave-ins. Upon completion of the inspection, the contractor supervisor signs off to confirm the excavation meets safety standards.
Weekly ambulance checklist
This document contains a weekly ambulance checklist for Association of Abu-Nayyan, Azmeel & Saudi Tumpane dated [DATE]. It lists 47 items related to the general vehicle components, engine compartment, and underside that are inspected for an ambulance with Make [MAKE] and Model [MODEL]. The inspected ambulance is designated to Nurse Mahdi Ameen Jaffar and driven by Mr. Hilal Sha. The checklist notes the condition of each item as good, fair, needing repair, or not applicable. Signatures are included from the inspector, driver, nurse, and safety manager to acknowledge the inspection.
Weekly air compressor check list
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.
Water tanker log sheet
This document is a log sheet to record water tanker details for filling a test water tank. It contains columns to note the date, time in, time out, quantity of water filled, driver details, tanker registration number, and representatives from the client and contractor who witnessed the filling. The total time taken to fill the tank is also recorded.
Water cooler monthly
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.
Vehicle plant daily inspection log
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.
Toilet cleaning check list
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.
Scissor lift 2 daily inspection log
The document is a checklist for inspecting a scissor lift. It contains questions to check for debris, overhead obstructions, the work surface's ability to support the lift, and the environment's suitability. It also has sections to check that required personal protective equipment is available and in good condition, that the operator is trained and authorized, and that the overall machine condition is acceptable. Additional sections check that ground and platform controls function properly, emergency controls work from the ground, outriggers function if equipped, lug nuts are tight, cables and wires are secure, guardrails are in good condition, and placards/warnings are legible. The checklist also prompts inspecting fluid levels, for leaks, loose/missing parts
More from Azmeel Contracting Company (20)
Training confined space entry holewatch man [compatibility mode]
Training confined space entry holewatch man [compatibility mode]
Risk assessment for testing & commissioning of cranes
Risk assessment for testing & commissioning of cranes
Recently uploaded
Community pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
How to Fix the Import Error in the Odoo 17
An import error occurs when a program fails to import a module or library, disrupting its execution. In languages like Python, this issue arises when the specified module cannot be found or accessed, hindering the program's functionality. Resolving import errors is crucial for maintaining smooth software operation and uninterrupted development processes.
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS Template 2023-2024 by: Irene S. Rueco
Advanced Java[Extra Concepts, Not Difficult].docx
This is part 2 of my Java Learning Journey. This contains Hashing, ArrayList, LinkedList, Date and Time Classes, Calendar Class and more.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
clinical examination of hip joint (1).pdf
described clinical examination all orthopeadic conditions .
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
ANATOMY AND BIOMECHANICS OF HIP JOINT.pdf
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)Academy of Science of South Africa
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.Recently uploaded (20)
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
Executive Directors Chat Leveraging AI for Diversity, Equity, and Inclusion
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
RPMS TEMPLATE FOR SCHOOL YEAR 2023-2024 FOR TEACHER 1 TO TEACHER 3
Digital Artefact 1 - Tiny Home Environmental Design
Digital Artefact 1 - Tiny Home Environmental Design
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Pride Month Slides 2024 David Douglas School District
Pride Month Slides 2024 David Douglas School District
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
South African Journal of Science: Writing with integrity workshop (2024)
South African Journal of Science: Writing with integrity workshop (2024)
Employee manual time card
- 1. Days HRS Project Signature Days Hrs Project Signature Normal To 21 6 Week 1 22 7 Week 2 23 8 Week 3 24 9 Week 4 25 10 Week 5 26 11 27 12 28 13 29 14 30 15 31 16 1 17 2 18 3 19 4 20 5 SITE FOREMAN ENGINEER PROJECT MANAGER Summary EPC OF JIC COOLING PLANT (098 -C58) Name Trade Employee Code / ID Manual Time Card Company Month