Planos tecnicos
•
0 likes•456 views
This document contains engineering drawings across 3 sheets. Sheet 1 provides overall dimensions for a design and calls out details A and B to be shown at increased scales on further sheets. Sheet 2 contains enlarged detail views of sections A and B at the specified scales. Sheet 3 provides a section view of detail D-D at a scale of 1:1 and includes no other information.
Report
Share
Report
Share
Download to read offline
Recommended
Grifo
The document appears to be a technical drawing or engineering specification sheet. It contains numeric measurements in different units for items A through D in rows 1 through 6. At the bottom are additional numeric values that may correspond to dimensions or specifications. The sheet was designed by Alejo and approved on 6/06/2016.
Entrega grifo final Juan Ospina
This engineering drawing document contains details for sheet 1 of 1, including three sections labeled A, B, and C with dimensions and a scale of 1:1 or 2:1. It was drawn by Juan Ozpina on June 6, 2016 for an unspecified title, size, and revision number.
Plano y modelado grifería Mónica Cadena
The document contains technical drawings for plumbing fixtures (griferia) with measurements in millimeters. It includes general plans and a side view of the plumbing fixtures with labeled dimensions. The drawings were created by Mónica Cadena on May 6, 2016 and include a title block with her name and the date.
Presentacion final
This document contains engineering drawings for a faucet called "Grifo Armonia" including:
- Isometric, top, front and side views of the faucet at a scale of 1:3
- Isometric, top, front and side views of the faucet handle at a scale of 1:1
- Isometric, front, top and side views of the faucet base at scales of 1:1 and 1:2
- Cross sections A-A and B-B at a scale of 1:2
- Front and side views of the faucet with cross sections at a scale of 1:2
- Detail views A and B of parts at a
Grifo javier
The document contains engineering drawings for a faucet or tap including dimensions and specifications. There are three sheets showing different views of the faucet with labels for parts and scales. The drawings include details like dimensions, tolerances, titles, dates, and approval signatures.
Llavero javier
The document contains engineering drawings for a keychain including dimensions and views. It includes a top view with dimensions, a section view cutting through the center, and an enlarged detail view of one end. The drawings were created by Javier Combita, checked by Oscar Fernandez, and approved on April 5, 2016 for the keychain project.
BRACKET.0001
This document contains engineering drawings for a bracket, including dimensions, tolerances, and bend specifications. Fifteen bends are specified, most at 90 degrees but some at 44 or 88 degrees, with radii ranging from 0.016 to 0.75 inches. The drawing includes two tables with dimensional specifications across eight numbered rows and bend details across fifteen numbered rows.
Flat Pattern SM Ex2.PDF
This document contains a technical drawing with the following information:
1) It includes rotation commands to create a 3D part including DOWN and UP rotations of 90 and 75 degrees.
2) It lists the material as AISI 1020 and labels the scale as 1:2.
3) In addition to geometric dimensions, it specifies tolerances of 0.2 for zero place dimensions, 0.1 for one place, and 0.01 for two place dimensions. Angular tolerances are listed as 0.5 degrees.
Recommended
Grifo
The document appears to be a technical drawing or engineering specification sheet. It contains numeric measurements in different units for items A through D in rows 1 through 6. At the bottom are additional numeric values that may correspond to dimensions or specifications. The sheet was designed by Alejo and approved on 6/06/2016.
Entrega grifo final Juan Ospina
This engineering drawing document contains details for sheet 1 of 1, including three sections labeled A, B, and C with dimensions and a scale of 1:1 or 2:1. It was drawn by Juan Ozpina on June 6, 2016 for an unspecified title, size, and revision number.
Plano y modelado grifería Mónica Cadena
The document contains technical drawings for plumbing fixtures (griferia) with measurements in millimeters. It includes general plans and a side view of the plumbing fixtures with labeled dimensions. The drawings were created by Mónica Cadena on May 6, 2016 and include a title block with her name and the date.
Presentacion final
This document contains engineering drawings for a faucet called "Grifo Armonia" including:
- Isometric, top, front and side views of the faucet at a scale of 1:3
- Isometric, top, front and side views of the faucet handle at a scale of 1:1
- Isometric, front, top and side views of the faucet base at scales of 1:1 and 1:2
- Cross sections A-A and B-B at a scale of 1:2
- Front and side views of the faucet with cross sections at a scale of 1:2
- Detail views A and B of parts at a
Grifo javier
The document contains engineering drawings for a faucet or tap including dimensions and specifications. There are three sheets showing different views of the faucet with labels for parts and scales. The drawings include details like dimensions, tolerances, titles, dates, and approval signatures.
Llavero javier
The document contains engineering drawings for a keychain including dimensions and views. It includes a top view with dimensions, a section view cutting through the center, and an enlarged detail view of one end. The drawings were created by Javier Combita, checked by Oscar Fernandez, and approved on April 5, 2016 for the keychain project.
BRACKET.0001
This document contains engineering drawings for a bracket, including dimensions, tolerances, and bend specifications. Fifteen bends are specified, most at 90 degrees but some at 44 or 88 degrees, with radii ranging from 0.016 to 0.75 inches. The drawing includes two tables with dimensional specifications across eight numbered rows and bend details across fifteen numbered rows.
Flat Pattern SM Ex2.PDF
This document contains a technical drawing with the following information:
1) It includes rotation commands to create a 3D part including DOWN and UP rotations of 90 and 75 degrees.
2) It lists the material as AISI 1020 and labels the scale as 1:2.
3) In addition to geometric dimensions, it specifies tolerances of 0.2 for zero place dimensions, 0.1 for one place, and 0.01 for two place dimensions. Angular tolerances are listed as 0.5 degrees.
Assem GU Explode.PDF
This document contains a technical drawing of a gear unit assembly with 8 parts. It includes a scale, title block with revision date, part numbers, materials, quantities and other annotations to fully specify the assembly. Dimensions and tolerances are provided to manufacture and inspect the parts.
Cam Valve Assem Drawing.PDF
This document is an exploded view assembly drawing of a cam valve assembly with bill of materials. The assembly consists of 6 main parts: a shoulder screw, rocker arm, cam, valve, spring, and body. The drawing shows the parts in their exploded positions with labels and dimensions. The bill of materials lists each part number, name, material, and quantity.
Vent.PDF
The document is an engineering drawing that includes:
- Dimensions and tolerances for internal and external features of a 3D part.
- Section views, detail views, and notes specifying geometric features like holes, radii, and thicknesses.
- The part number, title, scale, material, date, and name of the designer.
Assem Draw Mouse.PDF
This document contains assembly drawings and bill of materials for a computer mouse. The drawings include orthographic views and exploded views of the mouse components. The bill of materials lists 4 parts - the bottom housing, top housing, buttons, and screws - along with their quantities and materials. Assembly and manufacturing notes are also provided.
Planos section 2
The document appears to be a technical drawing sheet showing a cross section of a part called the "MAIN PART / SECTION 2" for a product called the "CRABBY VALV". It includes labels for dimensions and features like "A", "B", "C", and "D". The drawing is sheet 5 of 5, was drawn by Diego Moreno, checked by Oscar Fernandez, and approved on February 6, 2016.
Buzzer.PDF
The document contains a technical drawing with multiple views and details of a mechanical part. Dimensions, tolerances, and notes are provided to fully specify the geometry and manufacturing requirements. Reference numbers are included to identify features and relate different views.
Weldments Demo
The document appears to be an engineering drawing showing the dimensions and features of a welded assembly. It includes labeled views and measurements for various parts that are to be welded together, including rectangular sections of different lengths, thicknesses and widths. The drawing also lists the date it was drawn, the part number, title and other production details.
Project 8-35
This engineering drawing shows the details for a Homework Project 8-35, including dimensions for 8 different parts labeled A through D. It was drawn by Brian Terrill on February 1st, 2016 for a project measuring 95 inches by 50 inches.
EX7-72
This document contains drawings and a bill of materials for a bench vice. The drawings include section, top, front and side views showing the dimensions and assembly of the parts. The bill of materials lists 11 components of the vice including the base, sliding jaw, jaw plates, vice screw, collar, special key, handle rod and ball, slide key, set screws, flat head machine screws and taper pins along with their quantities and materials.
12777 coastal single pages part26
This document contains product information and specifications for sash window pulleys. It includes descriptions of square and radiused end ball bearing pulleys with different finishes. Dimensions and tolerances are provided. A new ball bearing pulley product is highlighted.
นำเสนอคุ้มกันวัยใส
This document contains various statistical data organized into tables and lists. The data includes percentages, counts, and numerical values related to categories 1 through 5. The document also describes 4 statistical models labeled G&B TR5 with associated statistical values.
Vise base2
This document contains a scale drawing of a vise base part with labeled dimensions. It includes a parts list identifying the material and part number for the vise base component. Dimensioned details are provided showing features of the vise base including holes, slots, and rounded edges.
Vise base4
This document contains technical drawings and specifications for parts of a vise. It includes 6 section views labeled D-D through F-F and 2 detail views J-J and K-K. It also contains a parts list with 14 numbered items, including materials, part numbers, quantities and descriptions of parts like the jaw plate, vise screw, collar, special key and handle components. Dimensioned drawings and notes provide information on hole sizes, threads, and other details to manufacture or assemble the parts.
Dobladora de caños
The document appears to be engineering drawings for a tube bending machine. It includes two sheets showing technical specifications and measurements for various parts of the machine. Key details shown are dimensions in millimeters for the machine base, bending plate, and other components. Tolerances and materials are specified, along with a title identifying it as drawings for a tube bending machine.
ViseEXPLODED
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up a vise. It includes 10 numbered parts for the vise made of materials like steel and SAE alloys. The parts include items like the vise base, sliding jaw, jaw plate, vise screw, collar, and handle components.
gate 2014 sol
This document contains the answer keys for the GATE 2014 exam for the Chemical Engineering section. It lists 56 questions from the exam and provides the correct answer or range of marks for each multiple choice or numerical answer question.
Ut t04
The document contains two tables showing measurements for points on a shell plan and roof plan. The shell plan table lists point numbers, measurements for 15 points, and notes N/A for some empty cells. The roof plan table similarly lists 6 points and measurements, along with labels for various locations around the roof perimeter.
Capex
This document outlines historical and projected capital expenditures (Capex), depreciation & amortization (D&A), and other key metrics for an asset from 2014-2027. It shows:
1) Capex has increased each period from $1.3B in 2014 to a forecasted $35.2B in 2025 while D&A has also risen from $231.9M to a projected $17B for 2027.
2) Various Capex-to-revenue and D&A-to-revenue percentages are provided for comparison over time.
3) D&A is forecasted out annually showing declining amounts each year as assets depreciate.
Boiler 3 & 4 Assembly
This document discusses converting Boilers 3 and 4 from coal to gas at the Acacia Boilers plant. Boilers 3 and 4 will be modified to run on gas instead of coal to reduce emissions. The conversion of these two boilers to gas will help the Acacia Boilers plant lower its environmental impact.
1
This document appears to be a technical drawing with a front view of an object labeled with the title "Vista frontal". It contains basic labeling including letters A through D and notes that it is sheet 1 of 1, drawn on July 1, 2013. No other details about the object or its dimensions are provided in this short summary-level view.
NBN_DigitalCommunityStrategy_BusinessCase
The document discusses the need for investment in the National Broadband Network (NBN) in the Mildura-Wentworth region of Australia. It notes that the region is geographically isolated but economically important for agriculture. It currently has poor broadband infrastructure, impacting industries, education, healthcare and community. Investment in fast broadband through the NBN would boost economic growth, connectivity, and access to services. Existing strategies and infrastructure support improving broadband access, but a commitment is still needed to rollout the NBN in the region.
El poblamiento
El documento describe los dos tipos de asentamiento de la población: poblamiento rural y poblamiento urbano. Se diferencian principalmente por el número de habitantes, las actividades económicas y los servicios. También habla de la evolución de la población urbana a nivel mundial y de los diferentes tipos de planes urbanos como el irregular, ortogonal y radial.
More Related Content
What's hot
Assem GU Explode.PDF
This document contains a technical drawing of a gear unit assembly with 8 parts. It includes a scale, title block with revision date, part numbers, materials, quantities and other annotations to fully specify the assembly. Dimensions and tolerances are provided to manufacture and inspect the parts.
Cam Valve Assem Drawing.PDF
This document is an exploded view assembly drawing of a cam valve assembly with bill of materials. The assembly consists of 6 main parts: a shoulder screw, rocker arm, cam, valve, spring, and body. The drawing shows the parts in their exploded positions with labels and dimensions. The bill of materials lists each part number, name, material, and quantity.
Vent.PDF
The document is an engineering drawing that includes:
- Dimensions and tolerances for internal and external features of a 3D part.
- Section views, detail views, and notes specifying geometric features like holes, radii, and thicknesses.
- The part number, title, scale, material, date, and name of the designer.
Assem Draw Mouse.PDF
This document contains assembly drawings and bill of materials for a computer mouse. The drawings include orthographic views and exploded views of the mouse components. The bill of materials lists 4 parts - the bottom housing, top housing, buttons, and screws - along with their quantities and materials. Assembly and manufacturing notes are also provided.
Planos section 2
The document appears to be a technical drawing sheet showing a cross section of a part called the "MAIN PART / SECTION 2" for a product called the "CRABBY VALV". It includes labels for dimensions and features like "A", "B", "C", and "D". The drawing is sheet 5 of 5, was drawn by Diego Moreno, checked by Oscar Fernandez, and approved on February 6, 2016.
Buzzer.PDF
The document contains a technical drawing with multiple views and details of a mechanical part. Dimensions, tolerances, and notes are provided to fully specify the geometry and manufacturing requirements. Reference numbers are included to identify features and relate different views.
Weldments Demo
The document appears to be an engineering drawing showing the dimensions and features of a welded assembly. It includes labeled views and measurements for various parts that are to be welded together, including rectangular sections of different lengths, thicknesses and widths. The drawing also lists the date it was drawn, the part number, title and other production details.
Project 8-35
This engineering drawing shows the details for a Homework Project 8-35, including dimensions for 8 different parts labeled A through D. It was drawn by Brian Terrill on February 1st, 2016 for a project measuring 95 inches by 50 inches.
EX7-72
This document contains drawings and a bill of materials for a bench vice. The drawings include section, top, front and side views showing the dimensions and assembly of the parts. The bill of materials lists 11 components of the vice including the base, sliding jaw, jaw plates, vice screw, collar, special key, handle rod and ball, slide key, set screws, flat head machine screws and taper pins along with their quantities and materials.
12777 coastal single pages part26
This document contains product information and specifications for sash window pulleys. It includes descriptions of square and radiused end ball bearing pulleys with different finishes. Dimensions and tolerances are provided. A new ball bearing pulley product is highlighted.
นำเสนอคุ้มกันวัยใส
This document contains various statistical data organized into tables and lists. The data includes percentages, counts, and numerical values related to categories 1 through 5. The document also describes 4 statistical models labeled G&B TR5 with associated statistical values.
Vise base2
This document contains a scale drawing of a vise base part with labeled dimensions. It includes a parts list identifying the material and part number for the vise base component. Dimensioned details are provided showing features of the vise base including holes, slots, and rounded edges.
Vise base4
This document contains technical drawings and specifications for parts of a vise. It includes 6 section views labeled D-D through F-F and 2 detail views J-J and K-K. It also contains a parts list with 14 numbered items, including materials, part numbers, quantities and descriptions of parts like the jaw plate, vise screw, collar, special key and handle components. Dimensioned drawings and notes provide information on hole sizes, threads, and other details to manufacture or assemble the parts.
Dobladora de caños
The document appears to be engineering drawings for a tube bending machine. It includes two sheets showing technical specifications and measurements for various parts of the machine. Key details shown are dimensions in millimeters for the machine base, bending plate, and other components. Tolerances and materials are specified, along with a title identifying it as drawings for a tube bending machine.
ViseEXPLODED
This parts list contains information about the materials, part numbers, quantities, and descriptions for parts that make up a vise. It includes 10 numbered parts for the vise made of materials like steel and SAE alloys. The parts include items like the vise base, sliding jaw, jaw plate, vise screw, collar, and handle components.
gate 2014 sol
This document contains the answer keys for the GATE 2014 exam for the Chemical Engineering section. It lists 56 questions from the exam and provides the correct answer or range of marks for each multiple choice or numerical answer question.
Ut t04
The document contains two tables showing measurements for points on a shell plan and roof plan. The shell plan table lists point numbers, measurements for 15 points, and notes N/A for some empty cells. The roof plan table similarly lists 6 points and measurements, along with labels for various locations around the roof perimeter.
Capex
This document outlines historical and projected capital expenditures (Capex), depreciation & amortization (D&A), and other key metrics for an asset from 2014-2027. It shows:
1) Capex has increased each period from $1.3B in 2014 to a forecasted $35.2B in 2025 while D&A has also risen from $231.9M to a projected $17B for 2027.
2) Various Capex-to-revenue and D&A-to-revenue percentages are provided for comparison over time.
3) D&A is forecasted out annually showing declining amounts each year as assets depreciate.
Boiler 3 & 4 Assembly
This document discusses converting Boilers 3 and 4 from coal to gas at the Acacia Boilers plant. Boilers 3 and 4 will be modified to run on gas instead of coal to reduce emissions. The conversion of these two boilers to gas will help the Acacia Boilers plant lower its environmental impact.
1
This document appears to be a technical drawing with a front view of an object labeled with the title "Vista frontal". It contains basic labeling including letters A through D and notes that it is sheet 1 of 1, drawn on July 1, 2013. No other details about the object or its dimensions are provided in this short summary-level view.
What's hot (20)
Viewers also liked
NBN_DigitalCommunityStrategy_BusinessCase
The document discusses the need for investment in the National Broadband Network (NBN) in the Mildura-Wentworth region of Australia. It notes that the region is geographically isolated but economically important for agriculture. It currently has poor broadband infrastructure, impacting industries, education, healthcare and community. Investment in fast broadband through the NBN would boost economic growth, connectivity, and access to services. Existing strategies and infrastructure support improving broadband access, but a commitment is still needed to rollout the NBN in the region.
El poblamiento
El documento describe los dos tipos de asentamiento de la población: poblamiento rural y poblamiento urbano. Se diferencian principalmente por el número de habitantes, las actividades económicas y los servicios. También habla de la evolución de la población urbana a nivel mundial y de los diferentes tipos de planes urbanos como el irregular, ortogonal y radial.
Planos geológicos, geotécnicos y de vías
Este documento contiene información sobre planos geológicos, geotécnicos y de vías. Los planos geológicos muestran características del subsuelo como estructuras y rocas. Los planos geotécnicos proveen datos cuantitativos y cualitativos sobre el suelo y rocas para proyectos de ingeniería. Los planos de vías ilustran sistemas viales como carreteras, autopistas y calles para facilitar la movilidad.
Geografia los planos y sus elementos
El documento habla sobre los planos urbanos, sus elementos y cómo se han vuelto más precisos con la tecnología. Explica que los planos muestran la ciudad desde arriba y contienen calles, manzanas y lugares de interés. Usan colores, símbolos y dibujos para distinguir elementos y los puntos cardinales para orientarse. También tienen valor histórico para ver cómo ha cambiado una ciudad. El texto concluye con una actividad donde Luis usa un plano de su ciudad para organizar una visita de lugares para su primo cojeando
El diseño industrial.Normalización
El documento describe los principios de normalización en el diseño industrial y técnico, incluyendo formatos, líneas, rotulación, escalas y acotación. Explica que la normalización busca estandarizar medidas, características y seguridad para favorecer el comercio. Detalla los diferentes tipos de formatos, líneas, rotulación, escalas y convenciones para acotar dimensiones en dibujos técnicos.
Ras 2000 (presentacion)
Este documento presenta un resumen del Reglamento Técnico del Sector de Agua Potable y Saneamiento Básico de Colombia. Describe los objetivos, alcances, procedimientos y niveles de complejidad para el desarrollo de proyectos en este sector, así como los requisitos para la identificación, justificación, diseño y evaluación socioeconómica de los mismos.
Norma sismo-resistente-NSR-10 completa
Este documento presenta las principales modificaciones técnicas y científicas realizadas para actualizar el Reglamento Colombiano de Construcción Sismo Resistente NSR-10. Se tuvieron en cuenta las últimas versiones de normas internacionales y se incluyeron nuevos temas como las estructuras de guadua. Los mapas de amenaza sísmica fueron actualizados usando más datos sismológicos e investigaciones sobre la tectónica del país. Los parámetros de diseño sísmico ahora se definen con dos valores en lugar de uno para mejor describ
Clase 4 dibujo tecnico Mod02. Sistema de representación Ortogonal
Este documento describe los sistemas de representación utilizados en dibujo técnico, incluyendo proyecciones, sistemas ortogonales y elementos de las proyecciones. Explica los tipos de proyecciones como proyección cónica, paralela y ortogonal, y los elementos clave de las proyecciones como el centro de proyección, plano de proyección y línea de proyección. También cubre el sistema diedrico, triédrico y de Monge para representar objetos tridimensionales en dos o más planos de proyección.
Construccion De Estructuras De Concreto Reforzado
El documento describe diferentes tipos de acero y elementos estructurales de concreto armado. Explica que el acero de refuerzo se usa comúnmente en varillas de diferentes diámetros para reforzar el concreto. También describe elementos como columnas, vigas, losas y cimientos, incluyendo sus características y usos.
LAS VISTAS DE UN OBJETO
El documento explica los pasos para obtener las tres vistas (plano de alzado, planta y perfil) de un objeto tridimensional. Se proyectan los vértices del objeto sobre los planos de proyección para obtener las líneas y caras. Las tres vistas están relacionadas y se pueden girar para situarlas en el mismo plano, mostrando mejor su correspondencia.
Viewers also liked (10)
Clase 4 dibujo tecnico Mod02. Sistema de representación Ortogonal
Clase 4 dibujo tecnico Mod02. Sistema de representación Ortogonal
Recently uploaded
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
Revolutionizing the Digital Landscape: Web Development Companies in India
Discover unparalleled creativity and technical prowess with India's leading web development companies. From custom solutions to e-commerce platforms, harness the expertise of skilled developers at competitive prices. Transform your digital presence, enhance the user experience, and propel your business to new heights with innovative solutions tailored to your needs, all from the heart of India's tech industry.
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
Storytelling For The Web: Integrate Storytelling in your Design Process
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
一比一原版(UW毕业证)西雅图华盛顿大学毕业证如何办理
UW毕业证学历书【微信95270640】做UW文凭、办UW文凭、买UW文凭Q微信95270640买办国外文凭UW毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UW学历文凭、UW假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理西雅图华盛顿大学西雅图华盛顿大学毕业证假文凭流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！实伙伴平时山娃上学阿黑也摇头晃脑地跟去暑假用不着上学阿黑更是天天围着山娃转山娃上山除了察看埋下的野兽铁夹子看护早上逐上山的大黄牛外也觅着采草药摘红菇积攒起来拿到镇上卖山娃知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思片
Graphic Design Tools and Software .pptx
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
Top Interior Designers in Bangalore.pdf1
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
UNIT IV-VISUAL STYLE AND MOBILE INTERFACES.pptx
Visual Style and Aesthetics: Basics of Visual Design
Visual Design for Enterprise Applications
Range of Visual Styles.
Mobile Interfaces:
Challenges and Opportunities of Mobile Design
Approach to Mobile Design
Patterns
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Actions and Commands:
Tap, Swipe, and Pinch
Rotate and Shake -Buttons -Menu Bars – Menus
Toolbars - Links- Action Panels
Hover Tools - Keyboard Actions- Drag-and-Drop
Typed Commands-Affordance-Direct Manipulation.
Forms and Controls:
Basics of Form Design
Patterns.
Technoblade The Legacy of a Minecraft Legend.
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Timeless Principles of Good Design
Timeless Principles of Good Design from my 2015 Presentation at TYPO SF
Recently uploaded (20)
Revolutionizing the Digital Landscape: Web Development Companies in India
Revolutionizing the Digital Landscape: Web Development Companies in India
Storytelling For The Web: Integrate Storytelling in your Design Process
Storytelling For The Web: Integrate Storytelling in your Design Process
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Virtual Tour Application Powerpoint for museum of edinburgh
Virtual Tour Application Powerpoint for museum of edinburgh
Planos tecnicos
- 2. 1 1 2 2 3 3 4 4 A A B B C C D D SHEET 1 OF 2 DRAWN CHECKED QA MFG APPROVED anderson 6/06/2016 DWG NO TITLE SIZE C SCALE REV 35.27 20.00 38.59 19.53 106.29 9.49 66.75 48.07 49.02 9.51 16.20 20.83 68.21
- 3. DETAIL A SCALE 3 : 1 DETAIL B SCALE 5 : 1 A B 1 1 2 2 3 3 4 4 A A B B C C D D SHEET 2 OF 2 DRAWN CHECKED QA MFG APPROVED anderson 6/06/2016 DWG NO TITLE SIZE C SCALE REV 14.08 8.00 10.00 10.00 2.55 1.13
- 4. SECTION D-D SCALE 1 : 1 D D 1 1 2 2 3 3 4 4 A A B B C C D D SHEET 3 OF 3 DRAWN CHECKED QA MFG APPROVED anderson 6/06/2016 DWG NO grifo1 TITLE SIZE C SCALE REV