Eliminazione strisciamento ruota muletto
•
0 likes•95 views
Eliminazione strisciamento ruota muletto
Report
Share
Report
Share
Recommended
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
ABS 3D PRINTED AND PAINTED WITH CONDUCTIVE PAINT
The document discusses a 3D printed ABS part that was painted with conductive paint. The part was tested and found to have a resistance of approximately 50 Ohms on a scale of 100 Ohms. The document is confidential and unauthorized copying is prohibited.
PLA DISSOLVED INTO NOT DANGEROUS LIQUID
This document discusses dissolving PLA plastic into a liquid. It notes that PLA can be dissolved into a liquid that is not dangerous. The document is confidential and unauthorized copying is not permitted.
CLEAR BOTTLE 3D PRINTED
This document discusses a 3D printed clear bottle. It is a confidential document from Keytech S.r.l. dated June 29, 2016 and is not authorized for commercial use due to copyright. Unauthorized copying of the confidential documents is not permitted.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
Recommended
SMOOTHED PLA TEST 2
This document discusses confidential testing of smoothed PLA material conducted on May 17, 2016. It contains copyrighted information from Keytech S.r.l and warns against unauthorized copying of the confidential documents and test results.
Burned Residual Material Remouved
Burned residual material was removed from a site on three separate occasions in May and July 2016. The documents related to the work are confidential and unauthorized copying is prohibited according to the copyright of Keytech S.r.l., an Italian company. Burned material was removed from the site multiple times.
SAME PART
The document discusses 3D printed parts that can be coated with PTFE and painted. It notes that the document contains confidential information and unauthorized copying is prohibited. It also mentions making parts without paint.
ABS 3D PRINTED AND PAINTED WITH CONDUCTIVE PAINT
The document discusses a 3D printed ABS part that was painted with conductive paint. The part was tested and found to have a resistance of approximately 50 Ohms on a scale of 100 Ohms. The document is confidential and unauthorized copying is prohibited.
PLA DISSOLVED INTO NOT DANGEROUS LIQUID
This document discusses dissolving PLA plastic into a liquid. It notes that PLA can be dissolved into a liquid that is not dangerous. The document is confidential and unauthorized copying is not permitted.
CLEAR BOTTLE 3D PRINTED
This document discusses a 3D printed clear bottle. It is a confidential document from Keytech S.r.l. dated June 29, 2016 and is not authorized for commercial use due to copyright. Unauthorized copying of the confidential documents is not permitted.
SMOOTHED PLA
The document contains notices from Keytech S.r.l. stating that it is confidential and copyrighted by the company on May 14, 2016. It warns against unauthorized copying and details are about smoothed PLA filament. The document repeats this information over multiple pages.
Trasparency increasing
The document discusses a new treatment that increases the transparency of printed documents. It notes the date of June 25, 2016 and contains warnings about confidentiality and unauthorized copying. The treatment is said to increase transparency when applied to printed documents.
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
New object
This document from Keytech S.r.l. dated December 25, 2015 declares that it contains confidential information. It warns that unauthorized copying of the documents is prohibited. The document appears to relate to intellectual property or trade secrets that Keytech aims to protect from disclosure.
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
CONDUCTIVITY TEST 1
The document discusses a conductivity test and contains confidential information from Keytech S.r.l. dated November 8, 2016. Unauthorized copying of the confidential documents is not permitted.
Zortrax M200 and PLA LAYER CLAY 01
Zortrax M200 and PLA LAYER CLAY 01
(clay effect)
Zortrax M200 in original version
zhips profile printing
0,14 mm layer heigh
6 hours printing
First printing and post processing test with m200 and new clear filament
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
PLA LAYER GOLD 1 COLOUR
This document provides information on a filament testing project. It specifies that the object created is not for sale and any unauthorized copying is prohibited. The filament being tested is PLA LAYER GOLD 1 COLOUR.
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
PLA RENEGADE - FIRST TEST PRINTING -
The document discusses a test printing of a 3D printed object called PLA Renegade using a layer height of 0.15mm. It notes the documents related to the test printing are confidential and unauthorized copying is prohibited. The test printing achieved the planned layer height of 0.15mm.
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
PBT FILAMENT ON ZORTRAX M200
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
More Related Content
Viewers also liked
SMOOTHED DSF 3D PRINTING FILAMENT
This document discusses a smoothed DSF 3D printing filament and contains repeated warnings about confidentiality and unauthorized copying. It is copyrighted by Keytech S.r.l. as of September 8, 2016.
SMOOTHED PLA TEST 4
The document appears to be a technical report or test results for a smoothed PLA material. It contains repetitive information indicating multiple pages or sections. The document and its contents are confidential, and unauthorized copying is not permitted. It includes a copyright notice for Keytech S.r.l. for the year 1408/16.
New object
This document from Keytech S.r.l. dated December 25, 2015 declares that it contains confidential information. It warns that unauthorized copying of the documents is prohibited. The document appears to relate to intellectual property or trade secrets that Keytech aims to protect from disclosure.
BEFORE AND AFTER
The document discusses confidential documents and unauthorized copying. It mentions that copying of confidential documents is not allowed without permission. The document is copyrighted by Keytech S.r.l. and dated August 31, 2016.
PLA LAYER GOLD PRINTED ON ZORTRAX M200
PLA LAYER GOLD PRINTED ON ZORTRAX M200
- printed on Zortrax M200 without hw or sw modifyied
- zglass profile
- 0,14 mm layer heigh
CONDUCTIVITY TEST 1
The document discusses a conductivity test and contains confidential information from Keytech S.r.l. dated November 8, 2016. Unauthorized copying of the confidential documents is not permitted.
Zortrax M200 and PLA LAYER CLAY 01
Zortrax M200 and PLA LAYER CLAY 01
(clay effect)
Zortrax M200 in original version
zhips profile printing
0,14 mm layer heigh
6 hours printing
First printing and post processing test with m200 and new clear filament
The document discusses a confidential test of printing and post-processing with a M200 3D printer and new clear filament. The test involved the first printing and post-processing with the M200 and new clear filament material. Details of the test were not provided to protect confidentiality.
PLA LAYER GOLD 1 COLOUR
This document provides information on a filament testing project. It specifies that the object created is not for sale and any unauthorized copying is prohibited. The filament being tested is PLA LAYER GOLD 1 COLOUR.
POLYPROPYLENE 35 % GLASS FIBER ON ZORTRAX M200
The document discusses printing polypropylene with 35% glass fiber on a Zortrax M200 3D printer. It notes the copyright and confidential nature of the document and warns against unauthorized copying. The material is repeatedly described as polypropylene with 35% glass fiber tested on the Zortrax M200 printer.
PLA RENEGADE - FIRST TEST PRINTING -
The document discusses a test printing of a 3D printed object called PLA Renegade using a layer height of 0.15mm. It notes the documents related to the test printing are confidential and unauthorized copying is prohibited. The test printing achieved the planned layer height of 0.15mm.
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
PBT FILAMENT ON ZORTRAX M200
This document discusses testing PBT filament on a Zortrax M200 3D printer. It contains confidential information from Keytech S.r.l. and unauthorized copying of the document is not permitted. The document provides information on printing with PBT filament on the Zortrax M200 printer.
Viewers also liked (13)
First printing and post processing test with m200 and new clear filament
First printing and post processing test with m200 and new clear filament
More from Stefano Corinaldesi
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved with not dangerous and not flammable stripper
TEK 1960 MSDS EN
TEK 1960 MSDS EN
http://www.zcory.com/prodotto/solvente-non-pericoloso-per-resine-liquide-viscose-tek1960/
MSDS TEK1969_EN_1
This safety data sheet provides information on a product called TEK 1969. It identifies the product and company details, lists the product's hazards and classifications, and provides guidance on handling, storage, disposal, transportation, and other safety information. The product contains a polymer based alcohol ethoxylate and is classified as non-hazardous but requires a safety data sheet under European regulations.
More from Stefano Corinaldesi (20)
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved
Eliminazione strisciamento ruota muletto
- 1. Eliminazione strisciamento ruota muletto Copyright Keytech S.r.l. 04/04/16 Confidential documents, unauthorized copying Strisciamento ruota muletto strisciamento ruota muletto eliminata PRIMA DOPO