Electrical Engineer 2

- 1 - - 1 -
SYED SALMAN
SR. ELECTRICAL ENGINEER POWER PLANT
REGISTERED PAKISTAN & SAUDI ENGINEERING COUNCIL
EXPERIENCE: 10 YEARS
EMAIL: nicesalman@hotmail.com
SKYPE: SALMAN.EJAZ5
CELL#:+92-333-0387905, +92-310-4006099
EPC Projects/Operation& Maintenance
-Troubleshooting and Problem Solving -Installation and Testing - Electrical Consultants Work
-Pre Cold Hot Commissioning -Project Management -Planning and Coordination
SUMMARY:
Professional Electrical Engineer of Combine cycle Power plant ,Substation, Over head transmission
lines ,Fertilizer, DRI Plant Petrochemical ,Oil and gas having 10 Years of Experience In depth expertise
of Design , Estimation, Tendering ,Detail Engineering, Construction, Pre Cold Hot Commissioning
Installation ,Testing trouble shooting plant maintenance using Condition Monitoring system for all
Electrical equipment ,overhauling of equipments, maintenance planning system, Electrical protection
field instrumentation, DCS SCADA PLC.
PROFESSIONAL EXPERTISE
BOP Balance of Plant System
EPC, EPCM BOT BOO LSTK Projects
Design & Detail Engineering
FAT/SAT Acceptance
Trouble shooting and Problem Solving
Installation Testing
Pre Cold Hot Commissioning
Project Planning & Management
RCM RCA FMEA FTA LOPA
Switch Gears HT MV LC AIS GIS
66KV 110KV 132KV 380KV SS
OHTL 380 & 132 KV
RMU & Capacitor Banks
SAP ERP CMMS
Crude Oil treatment Plant
Fire Alarm Fire Fighting
HVAC & Lighting System
SEC/ARAMCO Standard
Punch list NCR TCC PAC FAC
Desalination Water treatment
Preventive Predictive &
Corrective Maintenance
MCCs & LV Switch Board
Transformers & Reactors
Protection Relay
Field Instrumentation
Estimation Tendering
FEED Basic Detail Design
Spare Parts Management
HSE Plant Safety
Electrical Consultant
DCS SCADA PLC
Gas Turbines Generator
GCB GSU UAT IPBD SPBD
HT MV LV Motors
BCU LCC SAS RTU
VSD VFD Soft Starter
HT MV LV MOTORS
Primavera MS Project
)
EXPERIENCE: SEP-2012 – MAY 2015 (2 YEARS & 8 MONTH)
DESIGNATION: SR. ELECTRICAL ENGINEER MAINTENANCE
COMPANY PROFILE : SAUDI SERVICES FOR ELECTRO MECHANICAL WORKS LIMITED (SSEM)
LOCATION: RIYADH SAUDI ARABIA
WEBSITE: WWW.SSEM.COM.SA
SSEM is a subsidiary of Al-Rashid Group Saudi Arabia.
MAJOR ASSIGNMENT WITH SSEM
1-Rafha Saudi Arabia Siemens SGT-6 2X90MW, GE 2X30MW Gas Turbines Power Plants with HRSG Boiler
200MW Steam Turbines, Crude oil treatment Plant, Water treatment Plant and All BOP System
2-Quryat Saudi Arabia Siemens SGT-6 2X90MW Gas Turbines Power Plants with HRSG Boiler 200MW
Steam Turbines, Crude oil treatment Plant, Water treatment Plant and All BOP System
Installation Testing Commissioning Maintenance using RCM & Condition Monitoring Techniques.
3-NWC Riyadh Saudi Arabia Water transmission and Waster Water treatment Plants.

- 2 - - 2 -
Job Description:
Installation Testing Commissioning Maintenance using RCM & Condition Monitoring Techniques of
Duel Fuel DO CO Gas Turbines , Diesel Generators Black Start , HRSG , Fuel Oil treatment Plant ,
Water treatment Plant , Instrument Air & Plant Air Compressors, BOP System , EHV HV MV LV System
ABB, SF6 Breakers , SF6 Air and Oil Bushing Power Transformer up to 500MVA ,Shunt Reactor up to
80MVAR ,Isolator, Dis-connector Earth Switch Fast Earth Switch CTs PTs CVTs Surge Arrester Lightning
Arresters Grounding System,13.8-11KV-6.6KV AIS MV Switch Gears, 480V Intelligent and Conventional
Motor Control Centre (MCCs) Capacitor Banks, RMUs, Distribution Transformer,125V DC Batteries DC
Chargers DC Distribution Panels, 220V AC Distribution system, AC DC Lighting system, Cable duct
system Cable tray system in Tunnels and Building , Fire Fighting and Fire Alarm system , EHV HV MV
LV Control Cable ,Generator Protection Motor Protection TransformerProtection Feeder Protection
Transmission Lines Protection Distance protection Relay & Metering Panels and system , BCU LCC SAS
RTU Panels and Communication System ,Paging system , HVAC System , GCB GSU UAT SFC SEE IPBD
SPBD Electrical Equipment ,HT MV LV Motors , VSD VFD Soft starter , DCS SCADA PLC MCCs & IMCCs,
VSD, Soft Starter, MV LV Motors, Protection Relay & Metering Panel, DMR ,TFR & SOE Panels, Field
Instrumentation Control Valve Flow Level Pressure and temperature Transmitter etc
ROLES & RESPONSIBILITIES:
 Lead a team of 25 person including engineers, supervisors/ Forman, Electricians etc
 Installation and Testing of each and every types of Electrical Equipment.
 Development & implementation of Project Installation Commissioning & maintenance plans
 Compilation of equipment master data & PM Plans of all Electrical Equipment to be uploaded
in SAP MM & PM Modules.
 Prepares/arrange contract documents for Contracts in association with subordinate’s reports
and ensure inclusion of any additional installation by coordinating with other departments.
 Reviews with management/engineers the existing and potential projects in line within a
Company
 Conduct feasibility studies for various routine / non-routine capital projects meet / discuss
with higher authorities and user departments to finalize strategies, budget provisions and
execution plans.
 Plan and Implement inspection testing Schedule Non Schedule Preventive Predictive
Emergency Maintenance as per manufacturer guideline.
 Plan replacement of old faulty equipments and initiate procurement process.
 Plans/coordinate and supervise the installations and testing activities to ensure conformance
to design and equipment specifications.
 Plans, control and supervise the maintenance of electrical activities at various SEC
commercial, residential buildings, workshop facilities and recreational areas.
 Ensure availability of spares and tools and equipments for maintenance works as per standards.
 Reliability Centered maintenance RCM, Condition Monitoring of all electrical equipment Root
cause analysis, FMEA Failure mode effective analysis Fault tree analysis LOPA Layer of
protection Analysis, Risk Assessment and Hazop Study of Plant
 Conducting Root Cause Analysis of trips, equipment defects & preparing reports
 Maintenance planning to reduce downturn & optimizing plant availability
 Audit of PM/CM with planning department.
 Optimizing & Enhancing the PM plans based on previous records to maximize efficiency
 Shutdown planning for carrying out all shutdown jobs & reviewing the progress after shutdown
 Modification & engineering of Plant Systems for betterment
 Managing & ensuring safety at plant, conducting Walk Through Safety Audits, JSA & daily tool
box talk
 To assist HSE Dept. in OHSAS 18001:2007 & ISO 14001 certification
 Managing team of eight persons & assigning daily jobs
 Team building & cross discipline training of plant systems to staff
 Interviewing & evaluating candidates for hiring
 Procurement & Technical Evaluation of Spares, Tools & Materials & inventory management
 Follow up & expedition with planning & procurement for PR/PO
 Arranging & planning for services by contractors

- 3 - - 3 -
 Budget Planning & cost control with effective utilization
 Root cause analysis of breakdowns, trips & equipment failure
 Analyzing the contractors work & safety of the personnel
 Shutdown planning for carrying out all critical works
 Punch List compilation & resolution with contractor
 Close coordination with Procurement, Finance, Stores & Vendors/Suppliers
 Receives, codes, reviews, and processes new plant work orders using established planning
guidelines and computerized material management system on SAP.
 Interfaces with plant operations supervisors to pre-schedule equipment outages and coordinate
proper lock out/tag out, venting, draining etc. of equipment for scheduled maintenance
activities.
 Administers the day-to-day and outage maintenance planning requirements, including
preparing and maintaining outage Gant charts, and tracks and produces various maintenance
reports using the plant or corporate-based computerized software based management systems.
 Maintains records and logs and produces routine reports from written information or utilizing
computer resources.
 Initiates and updates inventory of material and equipment on day to day basis
 Develops and maintain job and job task work packages for the preventive.
 Address labor grievances so as to avoid interruption to the work in line with QP policies and
procedures.
 Attends / arranges prelease inspections for renting buildings/facility, ensure compliance with
Civil Defense Authority and prepare required standardization works.
 Provides necessary technical advice and support on electrical design requirements of existing
and new projects.
 Prepares/arrange contract documents for Contracts in association with subordinates reports
and ensure inclusion of any additional installation by coordinating with other departments.
 Distributes Notification to Senior Foreman, check and approve Release Orders submitted by
contractors and sign completion upon receipt of completed Services Entry Sheets from
subordinates. Spot check on works required to be done to ensure proper completion and
clearance of site.
 Controls and direct Senior Foreman and Technicians and ensure that all maintenance
schedules/dates are maintained by checking reports.
 Checks, review and comment on drawings submitted by other departments/Contractors
pertaining to Electrical works and ensure corporation standards are maintained and amend
changes in the maintenance point of view.
 Tendering, Budgeting, Drafting and Proposal Management.
 Experience with supplier equipment and workers in the Saudi Arabia Market.
 Knowledge & Expertise of compliances to the requirement of SEC Specification PTS and
Standards of Over head Transmission lines and GIS Substations up to 500KV
 Expertise in preparation of tender documents , contract procedures, technical specification,
evaluation of bids and preparation of BOQs etc.
 Prepare Procedures of site constructions.
 Selection and coordination with international firms specific to projects, MOUs, teaming
arrangement, association and authorization letters, sub consultancy agreements, joint
ventures agreement.
 Drafting and reviewing RFPs/Bid packages PO etc.
 Contract Negotiations, Clarifications, addendum, attending Pre-Bid & Post Bid clarification
meetings.
 Business Development activities and assistance to sales and business development team during
Techno-Commercialdiscussions with customers,
 Assisting management in business plans, operations review presentations & meetings to BOD.
 Responsible for updating proposal data base, status reports, competitors analysis, bid results &
analysis.
 Keeping and maintaining the data base up to date in line with internal & external ISO Audit
requirements and recommendations.

- 4 - - 4 -
 Ensure good and flawless documentation with clear backups ensuring and smooth handover of
acquired orders to executions team.

EXPERIENCE: JULY-2010- TO AUGUST 2012 (2 YEARS AND 1 MONTH)
DESIGNATION: DEPUTY MANAGER E&I
COMPANY PROFILE: TSML AL TUWAIRQI STEEL MILLS POWER PLANT AND DRI PLANT
LOCATION: BIN QASIM KARACHI PAKISTAN
WEBSITE: WWW.TSMLENGINEERING.COM
TSML is a Subsidary of Al Tuwairqi Holding Dammam Saudi Arabia
 Lead and manage a team of 15 People of Electrical maintenance Department.
 Preparation of maintenance plan on Computerized Maintenance Management system of Power
plant and Substation using SAP ERP system including PM Maintenance Module, Material
Management Module etc
 Optimizing maintenance resources by using adequate work identification planning and
scheduling tools and techniques
 Follow up maintenance in KPIs Key performance integrator gap closures review and
development of maintenance procedure.
 Plan replacement of old faulty equipments and initiate procurement process.
 Ensure availability of spares and tools and equipments for maintenance works as per standards.
 Ensure update status of inventories and creation of new material codes on SAP.
 Ensure safety as first priority in all job executed supervise complete JSA(Job safety
analysis),proper implementation of safety work permit (PTW),monthly safety audits and all
other safety reports as per OSHA standards.
 Perform equipment walk-down, safety walk-down & ensure safe turnover of equipment from
Contractor to Client.
 Leading and facilitating the failure investigation as required for equipment, generates reports
actions logs and follow up in their closures. Preparation of weekly and monthly reports
Presentations etc
 During operation and maintenance activities always identify areas of improvement with cost
effective solutions to higher management suggest up gradation in equipment specification as
per international standards.
 Ensure compliance with Project Technical Specifications, International Standards(IEC, IEEE,
ANSI), and OEM procedures and specifications
 Maintain records of O&M manuals and Electrical drawings of equipments installed in
Substations & Power plant.
 Reliability Centered maintenance RCM, Condition Monitoring of all electrical equipment Root
cause analysis, FMEA Failure mode effective analysis Fault tree analysis LOPA Layer of
protection Analysis, Risk Assessment and Hazop Study of Plant
 Conducting Root Cause Analysis of trips, equipment defects & preparing reports
 Daily Coordination with client, contractor & vendor to resolve issues
 Monitoring of functional and operational tests of various equipment in order to prepare the
equipment for the first start up.
 Review total Man Hours used in daily Maintenance activities etc
 Review/Approval of engineering documents and drawings, ECC and CCC packages, as-built
documents and test Procedures etc
 Inspection, Supervision & Witness of Site Testing & Commissioning
 Verification of the compliance of test results with the design and reliability requirements
 Preparation of inspection reports, certificates, progress reports and site correspondence
 Preparation and follow-up on Punch Lists & NCRs.
 Planning shutdown activities for closure of outstanding defects/issues

- 5 - - 5 -
 Assisting client’s maintenance department for carrying out smooth activities
 Daily Coordination with client, contractor & vendor to resolve issues.
EXPERIENCE: DEC 2008 – JULY 2010 (1 YEARS AND 7 MONTH)
DESIGNATION: DEPUTY MANAGER E&I
COMPANY PROFILE: TSML AL TUWAIRQI POWER PLANT AND DRI PLANT
LOCATION: BIN QASIM KARACHI PAKISTAN
TSML IS A SUBSIDIARY OF AL TUWAIRQI HOLDING DAMMAM SAUDI ARABIA
TSML IS RUNNING 35MW COMBINE CYCLE POWER PLANT WITH 6.5MW OF KAWASAKI GAS TURBINES,HRSG,12 MW
STEAM TURBINES, AIS/GIS SWITCH GEARS, POWER TRANSFORMERS, DCS FIELD INSTRUMENTATION ETC
 Lead a team of 6 People in maintenance planning section of Power Plant.
Management Module etc.
 Optimizing maintenance resources by using adequate work identification planning and
scheduling tools and techniques
EXPERIENCE: DEC-2006 TO DEC-2008 ( 2 YEARS)
DESIGNATION: E&I ENGINEER
COMPANY PROFILE: TSML AL TUWAIRQI DRI PLANT AND POWER PLANT
LOCATION: FTC FINANCE AND TRADE CENTRE KARACHI
TSML IS A SUBSIDIARY OF AL TUWAIRQI HOLDING DAMMAM SAUDI ARABIA
.
RESPONSIBLE FOR ALL WORK FROM EXECUTION TILL COMMISSIONING & POST-COMMISSIONING ACTIVITIES, REPORTING TO
MANAGER (E & I), LED A TEAM OF ENGINEERS, SUPERVISORS & TECHNICIANS. BRIEF RESPONSIBILITIES ARE AS FOLLOW:-
 Smooth execution of work at site according to approved standards & drawings
 Evaluation of feasibility of drawings with respect to site condition and make necessary
changes in coordination with design team to freeze final drawings
 Technical evaluations of tenders
 Procurement of materials & tools
 Planning & monitoring of activities within time, cost & quality constraints
 Prepare To do list, Check list & Punch list
 Monitor progress & prepare monthly progress reports
 Effective utilization of resources & Man-power management to increase productivity
 Prepare BoQ, estimating Man-hours, Material indenting & Bill verification
 Conflict & Risk Management & preparing root cause analysis
 Implementation of HSE Sop’s & conducting tool box talk
 Coordination with mechanical, Process & Procurement depts.
 Building competitive & motivated team
 Dealing & negotiations with vendor
EXPERIENCE: AUG-2006 TO DEC-2006 ( 3 MONTH)
DESIGNATION: DCS ENGINEER
COMPANY PROFILE: LUCKY CEMENT LIMITED
LOCATION: NOORIABAD KARACHI
WEBSITE: WWW.LUCKY-CEMENT.COM

- 6 - - 6 -
LUCKY CEMENT IS A SUBSIDIARY OF YUNUS BROTHERS PAKISTAN
INSTALLATION AND COMMISSIONING ENGINEER SIEMENS S7 PCS DCS
OPERATION AND MAINTENANCE OF 60 MW HSD POWER PLANT
EXPERIENCE: SEP-2005 TO SEP-2006 ( 1 YEAR)
DESIGNATION: E&I ENGINEER (MAINTENANCE PLANNING
COMPANY PROFILE: SITARA ENERGY LIMITED
LOCATION: FAISALABAD PAKISTAN
WEBSITE: www.sitara.com.pk/sitara-energy-ltd
SITARA ENERGY LIMITED IS 80 MW POWER PLANT IPP IN FAISALABAD PAKISTAN
Management Module etc.
MAJOR ASSINGMENT:
1) Electrical Consultant Power Generation AL Tuwairqi Group Pakistan & Saudi Arabia. (Till date).
2) Electrical Engineer 250MW Power Plant & 380/132KV BSP GIS Substation Bishah Saudi Arabia.
3) Electrical & Instrumentation Engineer 200 MW Rafha Power Plant Saudi Arabia.
Siemens 2x SGT 2000E Gas Turbines (70MW Each) 2x GE Gas Turbines (30MW Each) with Auxiliaries
and Complete Balance of Plant System including Crude oil treatment Plant.
4) Electrical Engineer 132/33KV/13.8 KV Rafha GIS Sub Station Saudi Arabia.
5) Electrical Engineer SGT 2000E 140 MW Quryat Power Plant.
6) E&I Engineer Kawasaki (GPB-70) 35 MW Combine Cycle GTG Power Plant Bin Qasim Karachi
Pakistan.
7) E&I Design Engineer for Arab Steel (Al-Tuwairqi Holding Dammam) Project.
8) Electrical Design Engineer for Diesel Generator 110 MW Power Plant of Altuwairq Holding
Dammam KSA
9) E&I Engineer 2X GE PG-9171E 500 MW Combine Cycle GTG Power Plant with HRSG and Steam
Turbine.
10) Electrical Engineer Project 10xCaterpillar & Hyundai Generator 50MW Power Plant in Faisalabad.
11) E&I Engineer Tuwairqi Steel Mills Limited (DRI Plant in Karachi Pakistan).
12) E&I Engineer Sitara Energy Power Plant Faisalabad Pakistan.
13) E&I Engineer Lucky Cement HSD Generators Power Plant Karachi Pakistan.
14) BP British Petroleum Project related to Equipment Sizing, Selection & Technical Evaluation of
Equipment.
HSE Exposure
Fully conversant with health, safety & environmental requirement for process plants as Quality
Management system ISO 9001-2008 OSHA Implement proper PTW Permit to work system, Lock out tag
out procedures, JSA Job safety procedure Monthly safety audits weekly safety presentations etc
HIGHLIGTED MAINTENANCE SKILLS:
 Maintenance of GSU 2x250MVA Power Transformer (Hysoung Korea) with OLTC(MR) &
2x30MVA UAT Unit Aux Transformer
 Maintenance of 3 x 9A5 TEWAC Generator (GE).
 Maintenance of ABB ACS 5000 GCB MV drive)
 Maintenance of MV & LV Motors up to 6150KW
 Maintenance of 13.8 KV 6.6kV & 480V Switchgears, Dry Type Transformers & VFD’s
 UPS, DC System, BSDG & EDG systems preventative maintenance

- 7 - - 7 -
 Maintenance of GE PG9171 GAS TURBINES 128MW EACH
 Maintenance of EMERSON & HONEY WELL DCS SYSTEM
 Maintenance of All Field Instrumentation of Power Plant
International Standards
IEC, ISO, ANSI/ISA, NFPA, NEC, AGA, SEC, ARAMCO etc.
Technical Trainings & Seminars
(a) 12-Days Experion PKS R300/C200 DCS (Distributed Control System) Training including Experion
Server, C200 Controller, Fail Safe Controller, Analog/Digital/Hart I/Os.(JRD Tata Honeywell
Automation Centre India ).
(b) Training Course of Siemens Simocode Pro V IMCC and 3RW44 Soft Starter E5 Professional
Conducted By Siemens Jeddah in Dammam Saudi Arabia.
(c) Trainings on Siemens Siprotech & ABB REC RET REB REL Series Protection Relays (Pakistan).
(d) On Site Training on Condition Monitoring system during operation and Maintenance of Plant by
SKF.
(e) On Site Training on Emerson Ovation DCS Complete Power Plant & Sub Station Monitoring
System.
(f) CO2 Fire Detection and Suppression System for Gas Turbine.
(g) Different Training on Emotional Intelligence and Operational Managements.
(h) Completed Training Course of Alstom/Areva Micom Series Protection Relays (Feeder
Management Relays P14X, Motor Management Relays P24X, Transformer Protection Relays
P63X and Generator Protection Relay P34X including Hands on Micom S1 Studio V3 and
Alstom/Areva T&D Automation Product.(Alstom/Areva).
(i) Primavera Project Planning Software Training.
(j) Different Seminar and Presentation of Siemens, ABB, Schneider, GE, Kawasaki, DESCON etc
FAT & SAT (Factory and Site Acceptance Test)
Factory Acceptance Test of 400 V Motor Control centre (Tiepco KSA)
Factory Acceptance Test of 11KV & 6.6KV Switch gear (ArevaT&D Pakistan).
Site Acceptance Test of ABB 6.6KV MV Motors and MV Drive.(TSML)
Factory acceptance test of Siemens 400 V LV Motors, LDBs, DCDB(Siemens )
Factory acceptance test of MV LV Cables (Pakistan Cables Limited).
Site Acceptance of CAT(Allied Engineering 1.6 MW Emergency Diesel Generator.(TSML)
Factory Acceptance Test of Power and Distribution Transformer(Siemens)
Project Management
‘Management by Objectives’.
‘Effective Communication Skills’
‘Developing Leader Ship Skills’.
Qualification
B.E. (Electronics) Specialization in Electrical Power, Instrumentation & Control System from Sir-Syed
University of Engineering & Technology Karachi, Pakistan,1st
Division in Year 2005.
Software Skills
 Engineering Design ETAP and other engineer software
 Miscellaneous Primavera Project Planner, Auto-CAD, MS Office/ Project
Siprotech & Micom V3.1 Relay Software, Maximo CMMS.
International Standards
IEC, ISO, ANSI/ISA, NFPA, NEC, AGA, SEC,ARAMCOetc.
Major Vendor List as per Expertise
Siemens, GE, Kawasaki, Dossan, Hyundai ,Hyosung Caterpillar Wartsila Jenbacher ABB Schneider
Alstom Dresser Rand, Honeywell Emerson Yokogawa Fisher Metso Atlas capco etc

Electrical Engineer 2

More Related Content

What's hot

Viewers also liked

Similar to Electrical Engineer 2

Electrical Engineer 2