The Genesis Remote Mount Signal Master Module provides precision synchronization and independent horn control for Genesis strobes and horns. It is shipped pre-assembled and contains no user-serviceable parts. The module requires a dedicated notification appliance circuit for the strobe circuit and allows the horn circuit to be cascaded with other modules on one NAC. Installation instructions are provided and involve verifying wiring, making connections, and mounting the module in an electrical box.
Buy the Edwards Signaling 2452THS-1575-W at JMAC Supply.
https://www.jmac.com/Edwards_Signaling_2452THS_15_75_W_p/edwards-2452ths-15-fslash-75-w.htm?=slideshare
The Genesis Remote Mount Signal Master Module provides precision synchronization and independent horn control for Genesis strobes and horns. It is shipped pre-assembled and contains no user-serviceable parts. The module requires a dedicated notification appliance circuit for the strobe circuit and allows the horn circuit to be cascaded with other modules on one NAC. Installation instructions are provided and involve verifying wiring, making connections, and mounting the module in an electrical box.
Buy the Edwards Signaling 2452THS-1575-W at JMAC Supply.
https://www.jmac.com/Edwards_Signaling_2452THS_15_75_W_p/edwards-2452ths-15-fslash-75-w.htm?=slideshare
1) The document provides an operating manual for the SAGA1-L10 Industrial Remote Controller made by Gain Electronic Co., Ltd. It details specifications, parts, operation instructions, troubleshooting tips, and warranty information.
2) Warranty covers defects in materials and manufacturing for one year from shipment. The buyer pays shipping to Gain for repairs, while Gain pays return shipping. The warranty excludes consumable parts and defects caused by improper installation, maintenance, modification, operation, or software/interfacing.
3) Precautions for installing the receiver include placing it as far as possible from frequency inverters and power cables to avoid interference, and mounting it on top of the electrical control box rather than inside.
Catalog mikro mikro mk301a-dienhathe.vnDien Ha The
The document describes an earth leakage relay, the MK301A/302A. It has features like a trip starting indicator, detection of no connection to the current transformer, and relay tripped indicator. It provides protection against electrical interference. The MK302A also has additional features like a safety output contact, earth leakage level indicators, and remote reset and test functions. The document provides technical specifications for the relay like voltage ranges, setting ranges, contact ratings, and environmental conditions.
The document provides an overview of Linear Technology's LTC295x push button controller family for applications requiring push button on/off control. It describes the features and capabilities of various push button controllers, including adjustable on/off timers, interrupt logic, supply monitoring, and wide operating voltage ranges. Selection tables and timing comparisons are provided to differentiate the parts and identify the best fit for specific applications.
This document provides instructions for installing and using the GR-105 Auto Valve. The valve uses Z-wave technology to remotely control gas flow. It can be installed on main ball valves for gas ductwork by attaching brackets and connecting the manipulator shaft to the valve handle. For bottled gas, the manipulator installs between the original angle valve and pressure reducing valve. If a gas alarm fails, the clutch can be pulled down to manually turn the handle until it reaches the dead point.
This document provides information about the Qubino Flush 1 relay Z-Wave module. The module can be used to switch electrical devices on or off through the Z-wave network or a wall switch. It measures power consumption and supports a digital temperature sensor. The module is designed to be installed in a wall switch box behind a traditional wall switch. It can support mono-stable or bi-stable switches and has configuration parameters for functions like input type and power reporting.
The document describes the design of a low-cost burglar alarm system for an apartment building. It involves analyzing the problem, specifying system requirements, selecting appropriate input and output devices, and designing the electronic control subsystem. The subsystem uses logic gates like OR, AND, and INVERTERS to process signals from a door reed switch, pressure mat, and arm key switch to trigger an alarm buzzer when the system is armed and either the door opens or pressure mat is activated. The system is then tested on a breadboard before evaluation.
This document lists the components and their quantities needed for an energy meter project including integrated circuits like the 7805 and AT89S52, resistors, capacitors, diodes, a crystal, transformer, LCD display, relays, connectors, wires, and packaging materials like a PCB board, soldering lead, CD and DVD. A manager has authorized the listed components and quantities.
This document contains a bill of materials for a conventional automatic transfer switch (ATS) system. It lists 7 items including power relay contacts, pilot lights, magnetic contactors, terminal lugs, wire, and a description of the ATS system to connect individual electrical units.
1) The document provides an operating manual for the SAGA1-L10 Industrial Remote Controller made by Gain Electronic Co., Ltd. It details specifications, parts, operation instructions, troubleshooting tips, and warranty information.
2) Warranty covers defects in materials and manufacturing for one year from shipment. The buyer pays shipping to Gain for repairs, while Gain pays return shipping. The warranty excludes consumable parts and defects caused by improper installation, maintenance, modification, operation, or software/interfacing.
3) Precautions for installing the receiver include placing it as far as possible from frequency inverters and power cables to avoid interference, and mounting it on top of the electrical control box rather than inside.
Catalog mikro mikro mk301a-dienhathe.vnDien Ha The
The document describes an earth leakage relay, the MK301A/302A. It has features like a trip starting indicator, detection of no connection to the current transformer, and relay tripped indicator. It provides protection against electrical interference. The MK302A also has additional features like a safety output contact, earth leakage level indicators, and remote reset and test functions. The document provides technical specifications for the relay like voltage ranges, setting ranges, contact ratings, and environmental conditions.
The document provides an overview of Linear Technology's LTC295x push button controller family for applications requiring push button on/off control. It describes the features and capabilities of various push button controllers, including adjustable on/off timers, interrupt logic, supply monitoring, and wide operating voltage ranges. Selection tables and timing comparisons are provided to differentiate the parts and identify the best fit for specific applications.
This document provides instructions for installing and using the GR-105 Auto Valve. The valve uses Z-wave technology to remotely control gas flow. It can be installed on main ball valves for gas ductwork by attaching brackets and connecting the manipulator shaft to the valve handle. For bottled gas, the manipulator installs between the original angle valve and pressure reducing valve. If a gas alarm fails, the clutch can be pulled down to manually turn the handle until it reaches the dead point.
This document provides information about the Qubino Flush 1 relay Z-Wave module. The module can be used to switch electrical devices on or off through the Z-wave network or a wall switch. It measures power consumption and supports a digital temperature sensor. The module is designed to be installed in a wall switch box behind a traditional wall switch. It can support mono-stable or bi-stable switches and has configuration parameters for functions like input type and power reporting.
The document describes the design of a low-cost burglar alarm system for an apartment building. It involves analyzing the problem, specifying system requirements, selecting appropriate input and output devices, and designing the electronic control subsystem. The subsystem uses logic gates like OR, AND, and INVERTERS to process signals from a door reed switch, pressure mat, and arm key switch to trigger an alarm buzzer when the system is armed and either the door opens or pressure mat is activated. The system is then tested on a breadboard before evaluation.
This document lists the components and their quantities needed for an energy meter project including integrated circuits like the 7805 and AT89S52, resistors, capacitors, diodes, a crystal, transformer, LCD display, relays, connectors, wires, and packaging materials like a PCB board, soldering lead, CD and DVD. A manager has authorized the listed components and quantities.
This document contains a bill of materials for a conventional automatic transfer switch (ATS) system. It lists 7 items including power relay contacts, pilot lights, magnetic contactors, terminal lugs, wire, and a description of the ATS system to connect individual electrical units.
This document provides instructions for the Floodline Groundhog MK 2 leak and flood detection system. It describes the system's indicators, controls, operation, and installation. The system uses probes and additional sensors to detect conductive liquids and generate alarms. It can be set to automatically or manually reset after alarms and the sensitivity is adjustable for different sensor types. Installation and wiring instructions are included.
The AI-1 is an 8-channel analog input module that can be installed in an Electro-Voice N8000 system. It features balanced inputs, 24-bit A/D conversion, and a dynamic range of 117dB. The module processes audio signals with 48-bit word length and provides additional analog inputs to the system with sampling at 48kHz and a delay of 1.375ms. It is installed by removing the rear panel blind, inserting the module, and securing it with screws.
The document describes a Samsung SMT-3232 32-inch LED monitor. It supports resolutions up to 1920 x 1080 with a contrast ratio of 5000:1 and response time of 8ms. It has video inputs including HDMI, DVI, VGA, and component. It has OSD display functions and optional VESA mounting and a stand. Dimensions are 721.4 x 420.3 x 49.9mm without the stand.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Building Production Ready Search Pipelines with Spark and MilvusZilliz
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
1. Installation Sheet 29APR05 P/N: 3100612 REV: 3.0
Genesis Ceiling Strobe 1 / 2
Genesis Ceiling Strobe
Product information
The Genesis Ceiling Strobe is a visible fire alarm notification
appliance designed for indoor ceilings and walls. See Table 1
for a list of model numbers.
The strobe includes a field configurable switch for selecting the
desired candela output. The candela output setting is locked in
place and remains visible after final installation.
This strobe features an enhanced synchronization circuit to
comply with the latest requirements of UL 1971 Signaling
Devices for the Hearing Impaired and the latest Canadian
standard CAN/ULC S526-02. Synchronized operation requires
a separately installed synchronization control module. See
Table 2 for a list of compatible synchronization modules.
Install this device in accordance with applicable requirements
in the latest editions of the NFPA codes and standards and
Canadian Electrical Code, Part 1, Section 32, CAN/ULC S524-
01, Standard for the Installation of Fire Alarm Systems, and in
accordance with the local authorities having jurisdiction.
Table 1: Models
Description Number
Strobe,
15 to 95 multi-cd, white
ADTGC-VM MGC-VM
EGC-VM XLSGC-VM
GC-VM ZGC-VM
GC-VM-LG
Strobe,
15 to 95 multi-cd, white,
with FIRE marking
ADTGCF-VM MGCF-VM
EGCF-VM XLSGCF-VM
GCF-VM ZGCF-VM
GCF-VM-LG
Strobe,
15 to 95 multi-cd, red,
with FIRE marking
EGCFR-VM
GCFR-VM
MGCFR-VM
Table 2: Compatible synchronization modules
Description Model number
Auto-Sync Output
Module
SIGA-CC1S SIGA-MCC1S
SIGA-CC1S-LG SIGA-MCC1S-LG
Genesis Signal Master -
Remote Mount
ADTG1M-RM MG1M-RM
EG1M-RM XLSG1M-RM
G1M-RM ZG1M-RM
G1M-RM-LG
Specifications
Operating voltage
Regulated 16 to 33 Vdc, 16 to 33 Vfwr
This device was tested to the Regulated 24 Vdc/fwr
operating voltage limits of 16 V and 33 V. Do not apply
80% and 110% of these values for system operation.
Strobe operating current: See Table 3
Light output: Selectable at 15, 30, 75, and 95 cd
Synchronization: Meets UL 1971 requirements. Maximum
allowed resistance between any two devices is 20 Ω.
Refer to specifications for the synchronization control
module, this strobe, and the control panel to determine
allowed wire resistance.
Wire size: 12 to 18 AWG (2.50 to 0.75 sq mm)
Compatible electrical boxes
North American 4 in square electrical box, 2-1/8 in deep
(no extension ring)
Operating environment
Temperature: 32 to 120 °F (0 to 49 °C)
Humidity: 0 to 93% RH, noncondensing at 90 °F (32 °C)
Agency listings: Meets year 2004 UL requirements for
standards UL1638 and UL1971 (see Figure 1) and
Canadian requirements for standards CAN/ULC S526-02
and CAN/ULC S524-01
Table 3: Strobe operating current in RMS (A)
15 cd 30 cd 75 cd 95 cd
Vdc 0.109 0.151 0.281 0.318
Vfwr 0.131 0.194 0.379 0.437
Vdc = Volts direct current, regulated and filtered
Vfwr = Volts full wave rectified
Operating currents shown above were measured by UL at 16
Vdc and 16 Vfwr.
100
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
95
100
0 5 10 15
20
25
30
35
40
45
50
55
60
65
70
75
80
85
90
-5-10-15
-20
-25
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
-85
-90
Angle
Percentage of rated output
Horizontal and vertical outputs reflect the same pattern.
Figure 1: UL 1971 minimum light output (% of rating vs. angle)
2. P/N: 3100612 REV: 3.0 29APR05 Installation Sheet
2 / 2 Genesis Ceiling Strobe
Installation Instructions
Warning: To reduce the risk of shock, disconnect all power
and allow 10 minutes for stored energy to dissipate before
handling.
Caution: Electrical supervision requires the wire run to be
broken at each terminal. Do not loop the signaling circuit field
wires around the terminals.
To install the strobe:
1. Remove the cover by depressing the tab on the side of the
unit with a small screwdriver. Turn the cover
counterclockwise to release.
2. If temporal strobe (private mode) operation is desired, cut
jumper JP1. See Figure 2.
3. Connect the strobe terminals to the signal circuit field
wiring. You must observe polarity for the unit to function
properly. See Figure 3.
4. Slide the candela switch to the desired candela output (15,
30, 75, or 95 cd) by aligning it with the indicator below the
switch. See Figure 4.
5. Mount the unit onto a compatible electrical box. See
Figure 5.
6. Replace the cover by positioning the alignment arrows
together and rotating the cover clockwise.
7. Test the unit for proper operation.
To change the from 1 fps (public
mode) to temporal (private mode) cut jumper JP1
strobe signal output
JP1
Figure 2: Strobe setting
Note: If the strobe is set to temporal (private mode), this
device is no longer UL 1971 listed and FM Approved but is UL
1638 listed.
S+
S+
S-
S-
To next
device or
end of line
device
++
To listed
fire alarm
control
panel
Figure 3: Wiring diagram
95
75
15
30
Candela switch
Indicator
Figure 4: Candela switch
Figure 5: Mounting diagram
Maintenance
This unit is not serviceable or repairable. Should the unit fail to
operate, contact the supplier for replacement.
Perform a visual inspection and an operational test twice a
year or as directed by the local authority having jurisdiction.