This manual provides instructions for safely using a product. It warns that the product contains a non-removable mains plug incorporating a fuse. It instructs the user to never use the plug without the fuse cover and to only replace the fuse with the same value. It also warns of electric shock and laser radiation hazards and instructs the user to only allow qualified service personnel to repair the product.
The document describes the MMF-300-10 ten-input monitor module, which interfaces between a control panel and normally open contact devices. It has ten addressable inputs that can be used for devices like pull stations, contacts, or flow switches. Each input has a status indicator and the module mounts in different cabinet options. It operates in either Class A or Class B and has features like removable terminal blocks and the ability to disable unused addresses.
The document provides installation and operating instructions for the Yaesu ATAS-120 Active Tuning Antenna System. The ATAS-120 is a motorized mobile antenna that resonates without the need for expensive resonating whips. It mounts to standard mounts and connects to compatible Yaesu transceivers. The instructions cover installation, operation, and safety cautions such as ensuring a solid ground connection and not touching the radiating element while transmitting.
This document provides safety precautions and instructions for servicing a Color Television. It outlines checks to perform after repairing the original issue to ensure safety, including checking for short circuits, replacing all protective devices, inspecting solder joints, and performing an AC leakage test. It also covers topics like fire and shock hazards, implosion risks, X-radiation from high voltage circuits, and proper product installation guidelines. Graphic symbols used to indicate safety information and their meanings are defined.
This 3 sentence summary provides the key details about the document:
The document provides specifications for the BC548/BC548A/BC548B/BC548C NPN general purpose amplifier transistors. It includes maximum ratings for voltage, current and temperature, as well as thermal and electrical characteristics such as current gain, saturation voltage, and noise figure. The transistors are designed for use as general purpose amplifiers and switches requiring up to 300mA of collector current.
This service manual provides instructions and safety precautions for servicing a color television. It includes specifications for the TV models, a circuit block diagram, instructions for adjustment modes, and troubleshooting guides. The document outlines proper installation procedures and contains sections describing integrated circuits and other electronic components used in the TV.
This document provides specifications for the BC556/557/558/559/560 series of PNP epitaxial silicon transistors. It lists the absolute maximum ratings and electrical characteristics such as collector-emitter voltage, collector current, and DC current gain for different transistor types. The transistors can be used for switching and amplification applications and come in a TO-92 package.
This document summarizes the specifications and characteristics of the BC546/547/548/549/550 NPN epitaxial silicon transistor. It includes maximum ratings, electrical characteristics, typical characteristics like static and transfer characteristics, and package dimensions for the TO-92 package. The transistors can be used for high or low voltage, low noise applications and complement other transistors in the BC556-BC560 range.
This document provides specifications for the V-Pass fingerprint reader manufactured by Bioscrypt, Inc. It describes the physical dimensions, materials, fingerprint sensor, color, weight, mounting options, and environmental specifications of the reader. It also outlines the electrical specifications and certifications the reader has received.
The document describes the MMF-300-10 ten-input monitor module, which interfaces between a control panel and normally open contact devices. It has ten addressable inputs that can be used for devices like pull stations, contacts, or flow switches. Each input has a status indicator and the module mounts in different cabinet options. It operates in either Class A or Class B and has features like removable terminal blocks and the ability to disable unused addresses.
The document provides installation and operating instructions for the Yaesu ATAS-120 Active Tuning Antenna System. The ATAS-120 is a motorized mobile antenna that resonates without the need for expensive resonating whips. It mounts to standard mounts and connects to compatible Yaesu transceivers. The instructions cover installation, operation, and safety cautions such as ensuring a solid ground connection and not touching the radiating element while transmitting.
This document provides safety precautions and instructions for servicing a Color Television. It outlines checks to perform after repairing the original issue to ensure safety, including checking for short circuits, replacing all protective devices, inspecting solder joints, and performing an AC leakage test. It also covers topics like fire and shock hazards, implosion risks, X-radiation from high voltage circuits, and proper product installation guidelines. Graphic symbols used to indicate safety information and their meanings are defined.
This 3 sentence summary provides the key details about the document:
The document provides specifications for the BC548/BC548A/BC548B/BC548C NPN general purpose amplifier transistors. It includes maximum ratings for voltage, current and temperature, as well as thermal and electrical characteristics such as current gain, saturation voltage, and noise figure. The transistors are designed for use as general purpose amplifiers and switches requiring up to 300mA of collector current.
This service manual provides instructions and safety precautions for servicing a color television. It includes specifications for the TV models, a circuit block diagram, instructions for adjustment modes, and troubleshooting guides. The document outlines proper installation procedures and contains sections describing integrated circuits and other electronic components used in the TV.
This document provides specifications for the BC556/557/558/559/560 series of PNP epitaxial silicon transistors. It lists the absolute maximum ratings and electrical characteristics such as collector-emitter voltage, collector current, and DC current gain for different transistor types. The transistors can be used for switching and amplification applications and come in a TO-92 package.
This document summarizes the specifications and characteristics of the BC546/547/548/549/550 NPN epitaxial silicon transistor. It includes maximum ratings, electrical characteristics, typical characteristics like static and transfer characteristics, and package dimensions for the TO-92 package. The transistors can be used for high or low voltage, low noise applications and complement other transistors in the BC556-BC560 range.
This document provides specifications for the V-Pass fingerprint reader manufactured by Bioscrypt, Inc. It describes the physical dimensions, materials, fingerprint sensor, color, weight, mounting options, and environmental specifications of the reader. It also outlines the electrical specifications and certifications the reader has received.
The document provides operating instructions for several Panasonic high definition video camera models. It includes safety precautions, instructions on using batteries and AC adapters, product identification markings, cleaning instructions, technical support contact information, and other important details for setting up and using the cameras properly.
The document provides safety instructions and operating guidelines for a multifunction printer, including how to power on the device, load paper, and clear jams. It also outlines basic fax functions like transmission modes, setting originals, and dialing, as well as how to register settings like quick dials and groups.
This document provides technical specifications and schematics for electrical equipment. It includes:
- Rated voltages, insulation voltages, frequencies, and other technical specifications.
- A schematic diagram of the power supply, control circuits, overvoltage protection, voltmeter, and auxiliary 230VAC circuit including a transformer and UPS.
- Component identification numbers, types, and connection details.
- Revision details and approvals.
Taxi led display installation manual(e10 and h1)Max Dan
Tips:
Check the all AC power connections are properly before turn on the power.
l Turn off the power, including LED Board, Terminal Computer, System Box and
Monitor before doing any maintenance.
l Do not touch the power supply when the power is on.
T748 a v surround sound receiver english manualweerawatplc
This owner's manual provides instructions for operating an AV surround sound receiver. It includes sections on safety instructions, identification of controls on the front and rear panels, instructions for using the remote control, and guidance for different operation modes including listening to radio (AM/FM and DAB) and customizing system settings. The document provides a comprehensive guide to setting up and using the receiver system safely and effectively.
T748 a v surround sound receiver english manualweerawatplc
This owner's manual provides instructions for operating an AV surround sound receiver. It includes important safety instructions and describes the controls and connections on the front and rear of the receiver. The manual explains how to set up the receiver for initial use and locate it properly for ventilation. It also provides setup instructions for listening to radio stations and presets, as well as using the various surround sound modes for movies and music.
The document provides instructions for an HD camcorder. It begins with important warnings about safety, copyright, and FCC compliance. It then provides 3 sentences or less on each of the following sections: controls and connections, power supply, recording media, recording video, customization options like custom settings and buttons, and audio functions. The document is an instruction manual that concisely outlines the camcorder's key features and functions.
The Datavideo TLM-700 is a 7-inch LCD monitor with the following key features:
- It has two composite video inputs and can automatically detect NTSC and PAL signals.
- Individual controls for brightness, contrast, color, and tint (NTSC only).
- A wide viewing angle and high resolution 1440 x 234 pixel screen.
- Can be powered by a 12V adapter or regulated 12V supply, making it suitable for field use.
- Comes with a carrying case for protection during transport.
This document contains safety instructions for operating a JVC BR-HD50 HD video cassette recorder. Key points include:
1. Read all instructions carefully before operating the unit and keep the instructions handy for future reference.
2. Do not place the unit near water or in an unstable location and ensure proper ventilation to prevent overheating.
3. Refer any service needs to qualified personnel, as opening the unit yourself may expose you to electric shock. Only have repairs done by approved service technicians using proper replacement parts.
This document provides instructions for a JVC BR-HD50 HD video cassette recorder. It includes important safety guidelines and information about features such as:
- Recording and playing back HD video in 720p format.
- Outputting digital video and audio via an HDMI terminal to view HD on compatible monitors.
- Outputting analog HD/SD video via a component output terminal.
- Inputting and outputting analog video via composite and Y/C terminals for recording in DV format.
This document is the owner's manual for the 01V96i audio mixer. It contains instructions and specifications for the device. The manual covers safety precautions, an overview of the control surface and rear panel, operating basics for the display and controls, connection and setup instructions, a tutorial on basic operations, troubleshooting information, and specifications for the device.
The document provides important safety instructions for using an electrical device. It warns of dangerous voltages within the product and instructs users to read all warnings, follow instructions, and not use the device near water. It also cautions users to protect the power cord, only use attachments specified by the manufacturer, and refer servicing to qualified personnel. Failure to heed the warnings could result in electric shock or damage to the device.
1) This document is the operation manual for the SHARP Projector model XV-Z20000/DT-5000.
2) It provides important safety warnings and instructions on setting up, connecting, and operating the projector.
3) The manual covers basic operation instructions including turning the projector on/off, selecting inputs, adjusting the image size, and contains troubleshooting information.
The document provides operating instructions for the AG-HPX500P/E P2 memory card camera-recorder, which features a 2/3-inch lens mount, support for multiple HD and SD formats including variable frame rates, 4 P2 card slots for extended recording, and menus for adjusting settings like white balance, shutter speed, and audio levels.
This document provides instructions for operating a JVC remote control panel. It begins with safety precautions and an overview of features. The document then discusses setup, shutter and gain settings, white balance and black balance adjustment, scene files, adjusting the indicator brightness, input/output ports, the selection DIP switch, operable features, operating the connected camera, and specifications. Troubleshooting tips and a table of contents are also included.
The Datavideo TLM-702 is a dual 7-inch LCD monitor unit for rack mounting. It has the following key features:
- Two 7-inch LCD screens with adjustable brightness, contrast, color, and tint
- Pivoting mounts to adjust screen angle
- Two video inputs and bypass outputs per screen
- Tally lights and aspect ratio selection
- Runs on 12V power for field use
The Datavideo TLM-702 is a dual 7-inch LCD monitor unit for rack mounting. It has the following key features:
- Two 7-inch LCD screens with adjustable brightness, contrast, color, and tint
- Pivoting mounts to adjust screen angle
- Two video inputs and bypass outputs per screen
- Tally lights and aspect ratio selection
- Runs on 12V power for field use
This user's manual provides instructions for safely using a printer product. It explains how to power on and off the printer, load and cut media, set the media heating system temperature, start printing, and replace ink cartridges when empty. Additional chapters cover operation of the printer's media take-up system and maintenance/cleaning procedures. The manual emphasizes reading it fully to understand the printer's performance and functions.
This document discusses lockout/tagout procedures for equipment maintenance at a concentrate plant. It defines key terms, outlines the steps for locking out equipment including verifying isolation and restoring energy. Special considerations for contractors, shift changes and abandoned locks are also reviewed. Quizzes are included to reinforce the proper lockout/tagout procedures.
The document provides operating instructions for several Panasonic high definition video camera models. It includes safety precautions, instructions on using batteries and AC adapters, product identification markings, cleaning instructions, technical support contact information, and other important details for setting up and using the cameras properly.
The document provides safety instructions and operating guidelines for a multifunction printer, including how to power on the device, load paper, and clear jams. It also outlines basic fax functions like transmission modes, setting originals, and dialing, as well as how to register settings like quick dials and groups.
This document provides technical specifications and schematics for electrical equipment. It includes:
- Rated voltages, insulation voltages, frequencies, and other technical specifications.
- A schematic diagram of the power supply, control circuits, overvoltage protection, voltmeter, and auxiliary 230VAC circuit including a transformer and UPS.
- Component identification numbers, types, and connection details.
- Revision details and approvals.
Taxi led display installation manual(e10 and h1)Max Dan
Tips:
Check the all AC power connections are properly before turn on the power.
l Turn off the power, including LED Board, Terminal Computer, System Box and
Monitor before doing any maintenance.
l Do not touch the power supply when the power is on.
T748 a v surround sound receiver english manualweerawatplc
This owner's manual provides instructions for operating an AV surround sound receiver. It includes sections on safety instructions, identification of controls on the front and rear panels, instructions for using the remote control, and guidance for different operation modes including listening to radio (AM/FM and DAB) and customizing system settings. The document provides a comprehensive guide to setting up and using the receiver system safely and effectively.
T748 a v surround sound receiver english manualweerawatplc
This owner's manual provides instructions for operating an AV surround sound receiver. It includes important safety instructions and describes the controls and connections on the front and rear of the receiver. The manual explains how to set up the receiver for initial use and locate it properly for ventilation. It also provides setup instructions for listening to radio stations and presets, as well as using the various surround sound modes for movies and music.
The document provides instructions for an HD camcorder. It begins with important warnings about safety, copyright, and FCC compliance. It then provides 3 sentences or less on each of the following sections: controls and connections, power supply, recording media, recording video, customization options like custom settings and buttons, and audio functions. The document is an instruction manual that concisely outlines the camcorder's key features and functions.
The Datavideo TLM-700 is a 7-inch LCD monitor with the following key features:
- It has two composite video inputs and can automatically detect NTSC and PAL signals.
- Individual controls for brightness, contrast, color, and tint (NTSC only).
- A wide viewing angle and high resolution 1440 x 234 pixel screen.
- Can be powered by a 12V adapter or regulated 12V supply, making it suitable for field use.
- Comes with a carrying case for protection during transport.
This document contains safety instructions for operating a JVC BR-HD50 HD video cassette recorder. Key points include:
1. Read all instructions carefully before operating the unit and keep the instructions handy for future reference.
2. Do not place the unit near water or in an unstable location and ensure proper ventilation to prevent overheating.
3. Refer any service needs to qualified personnel, as opening the unit yourself may expose you to electric shock. Only have repairs done by approved service technicians using proper replacement parts.
This document provides instructions for a JVC BR-HD50 HD video cassette recorder. It includes important safety guidelines and information about features such as:
- Recording and playing back HD video in 720p format.
- Outputting digital video and audio via an HDMI terminal to view HD on compatible monitors.
- Outputting analog HD/SD video via a component output terminal.
- Inputting and outputting analog video via composite and Y/C terminals for recording in DV format.
This document is the owner's manual for the 01V96i audio mixer. It contains instructions and specifications for the device. The manual covers safety precautions, an overview of the control surface and rear panel, operating basics for the display and controls, connection and setup instructions, a tutorial on basic operations, troubleshooting information, and specifications for the device.
The document provides important safety instructions for using an electrical device. It warns of dangerous voltages within the product and instructs users to read all warnings, follow instructions, and not use the device near water. It also cautions users to protect the power cord, only use attachments specified by the manufacturer, and refer servicing to qualified personnel. Failure to heed the warnings could result in electric shock or damage to the device.
1) This document is the operation manual for the SHARP Projector model XV-Z20000/DT-5000.
2) It provides important safety warnings and instructions on setting up, connecting, and operating the projector.
3) The manual covers basic operation instructions including turning the projector on/off, selecting inputs, adjusting the image size, and contains troubleshooting information.
The document provides operating instructions for the AG-HPX500P/E P2 memory card camera-recorder, which features a 2/3-inch lens mount, support for multiple HD and SD formats including variable frame rates, 4 P2 card slots for extended recording, and menus for adjusting settings like white balance, shutter speed, and audio levels.
This document provides instructions for operating a JVC remote control panel. It begins with safety precautions and an overview of features. The document then discusses setup, shutter and gain settings, white balance and black balance adjustment, scene files, adjusting the indicator brightness, input/output ports, the selection DIP switch, operable features, operating the connected camera, and specifications. Troubleshooting tips and a table of contents are also included.
The Datavideo TLM-702 is a dual 7-inch LCD monitor unit for rack mounting. It has the following key features:
- Two 7-inch LCD screens with adjustable brightness, contrast, color, and tint
- Pivoting mounts to adjust screen angle
- Two video inputs and bypass outputs per screen
- Tally lights and aspect ratio selection
- Runs on 12V power for field use
The Datavideo TLM-702 is a dual 7-inch LCD monitor unit for rack mounting. It has the following key features:
- Two 7-inch LCD screens with adjustable brightness, contrast, color, and tint
- Pivoting mounts to adjust screen angle
- Two video inputs and bypass outputs per screen
- Tally lights and aspect ratio selection
- Runs on 12V power for field use
This user's manual provides instructions for safely using a printer product. It explains how to power on and off the printer, load and cut media, set the media heating system temperature, start printing, and replace ink cartridges when empty. Additional chapters cover operation of the printer's media take-up system and maintenance/cleaning procedures. The manual emphasizes reading it fully to understand the printer's performance and functions.
This document discusses lockout/tagout procedures for equipment maintenance at a concentrate plant. It defines key terms, outlines the steps for locking out equipment including verifying isolation and restoring energy. Special considerations for contractors, shift changes and abandoned locks are also reviewed. Quizzes are included to reinforce the proper lockout/tagout procedures.
2. !
ffi GettingStart
$l9ofir ftfxorE
hndng
lhe mainrlead onthisequipm€nt rupplied
is with a
TOREDUCE RIs(OF
fHT SHOCX, NOT
TLECfNIC DO móuldedplug in@.poratinga fuse.lhe valueof the tus€
REMOW]Hf (OR
COVER BACK), is indi.ated on ttÉ pin faceof the piug.lf it rcquiret
PARÍSART REFER
NOUS€R-SERVìCEABLE INSIDE. of
replacÍng, fuseapproved 851362 the s?mer3ting
a to
TOQUATIF{ÉD
SEBVICING PTRSONNÉL
SÉRVICE
AffiA
Neverusetheplug withthetus€(over ominèdif the
ro,$ ,sdeîachable. a replacement
I tusecover
requir€d, mustbeof théiameol@r asthe pinfa.e of
it '5
the piug.Repla.em€nt covefr areavailablefrom your
Thirsymbol indicat€itang€lour vohagèquot; lf the ftted plug it not ruìtablefor the powerpoìhtsìn
inside product
the that presenteriik of
a
)our hoùre thecable not longenough rea.ha
or is to
el€ctficshockor p€rsonalinjury power point,you shouldobtain a euitablerafety
apprcvedextensionleador conJuhyour dealerfot
Ihissymbol important
indi(ates ìnstrudioh!
the
accompahylng Product-
Howev€r, therèis no altenative îo cuning of the plùg,
if
Donot Installrhie
equipment Lonnned
rpace$ch ar emoveùe tuseandthentatuly dirpose ofthe plus.Do
'nd not conneft th€ plug to a mainsja&, asthe.e i5 a ,isk of
a bookcase ímilBr unit.
or
shek hazard ftom the baredflenbl€ .o!d.
W nuilc : Topevent damagewhich mayresukin nre
o, eleflriLshoÉlha2a'd. note(poserh8
do lo dis.onnectîhe appantusfrom the maint thè pjug
applianceto or moistuÉ.
rain muf be pulled out fron thè mainerode! thèrcforethe
CAUTIONHDD& DVDne<order
: AN
USEs lN4Sl8LE mains pluqshallbe readit op€fable.
LASER EEAM WHICH CAUSE
CAN HAZASDOUS
8AD]ATION EXPOSURE If DIRtCItD 8[ 5URT fhe product unhac.ompaningthirurermanual is
TOOPEFATE & DVDRecorder
HOD CORRECILY li.ei.€d unds cenain lnlellènual prop€rryrìghti of
A5INffiUC]ED, <eftainîhird panies.lhis licenceis limited to plivate nÒft
commercial by ènd-user
usè úns'rmel'for licenced
ctuTtolrt
THISPRODUCTUTìLIZEs
ALAsER. No rightsar€grantedfor rommercialùse-
UsE CONIIOLS
OF 08ADJUÍMENIS PERFORMANCE
OR Th€licencedoer not coverany prod!.t unìi other th.n
OFPROCEDURES ]HAN-IIIOSE
O-IHER SPECIFIEDH€8EIN rhi! productunit and the lìcencedoe! not extendto any
MAYRESULTIN HAZARDOUS NADìATION EXPO5IJRE. unlicenced produd unitor procesr to
confoming l5o/
DONOT OPEN COVERs DONOTREPAIR
AND IEC1I 172-3or ISOIEC13818-l ueedor sold in
YOURsETF- 5E8VìCING QIJATIFIED
8ÉfER IO (ombination thisproduct
with unil.The li@nce only
PERSONNEL, covè6 the ùsèof this prcdu(t unit to €ncod€and/or
de(ode audio1il€sconfo.mingto lhe ISO/IEC 72-3or
M
Ibisp.odu.tsatisfe5 rcgùlationswh€n
CE 5hielded lsO/lEC 1381&3. íghts aregnnted underthis
No licence
cabl€! and connectors ured to conn€d the unit to
are for productfeatufesor funclionr thÀt do not confom tó
otherequìpm€nt, prevent
To eléctmagnelìc rhè lso/lEcr r 172-3 lsollE( I 3818'3.
0r
inrederence suchasradiosand
with electic appliances.
t€kvisio.s, useshieldedc.bl€t d connedoGfor