DROPS Training Certificate
•
0 likes•225 views
This certificate documents that Amol Deshmukh completed an e-learning course on dropped objects awareness and prevention. The course covered topics such as defining dropped objects, consequences of dropped objects, common causes, management, and prevention of dropped objects. Amol Deshmukh successfully completed an assessment at the end of the course, and the certificate is valid until 2018.
Report
Share
Report
Share
Download to read offline
Recommended
Rewriting DevOps
Six years is a long time to put up with a stack, a Senator, or an Ops approach. Craftsy has been working on a full rewrite of their core systems, and is reworking DevOps along the way. DevOps sounds good, but how do you bridge the material gap in skills and experience to bring Ops to dev, and dev to Ops? With iteration, humor, tools, and an open acceptance of failure.
Matthew Boeckman, VP - Infrastructure at Craftsy
Sandstorm or Significant? The evolving role of situational context in inciden...
Providing Situational Context to first responders is one of the most nuanced and critical success factors teams need as they manage and resolve incidents. It’s critical at all stages of incident management, from alert detection through postmortem. Provide no context, and you’ll materially impede resolution efforts. Overwhelm a team with data, and chaos ensues.
Dropped Objects Presentation - Aimed At Personnel Working In the Renewable En...
Dropped Objects Presentation - Aimed At Personnel Working In the Renewable En...Jonny Betts Grad IOSH
A brief presentation on Dropped Objects, information and prevention I created for use on an Offshore Wind Farm. Aimed at the Renewable Energy Industry, but beneficial to any industry where Working @ Height is undertaken.
As one of the highest causes of incidents at work it is vital that people are made aware of how to help prevent dropped objects from happening, as well as educated in the potential impact these objects can have.
The majority of dropped objects can be avoided with the correct mitigation and barriers in place but this will only be achieved by educating employees and employers alike to the dangers and ensuring potential issues are addressed.BLH Stop Drop safety system for all industries
simple unique design used among the industry leaders globally please pass this solution around to reduce injuries caused from Dropped Objects
Hazardous energy isolation
Hazardous energy isolation training presentation suited to heavy industry fixed and mobile plant applications. Mining industry Processing Plant specific.
Pipeline Construction Safety
The document provides guidelines on improving safety in pipeline construction. It discusses an organization called INGAA that develops safety guidelines for pipeline operators, construction companies, and equipment manufacturers. The document outlines principles of an effective safety culture and provides guidelines on excavation safety, working under utility lines, and pressure testing. For each topic, it describes hazards and recommendations. Key aspects covered include hazard assessment, roles and responsibilities, and methods to protect employees and the public. Communication is emphasized as essential for safely applying these and other construction guidelines.
ONTAP - Lock Out, Tag Out
Lock Out- Tag Out (LOTO) is the procedure to place a lock and tag on the energy source of malfunctioning industrial equipment to maintain it in a zero energy state during repairs. LOTO protects workers by locking out power to equipment before servicing and only allowing the qualified technician who removes the lock to restart it once repairs are complete. LOTO involves identifying energy sources like electricity, air, or steam; isolating them by closing valves or disconnecting lines; and applying locks and tags to prevent accidental startup until maintenance is finished.
LOTO - LOCK OUT TAG OUT
Dokumen tersebut memberikan informasi mengenai sistem Lock Out Tag Out (LOTO) yang digunakan untuk mengamankan peralatan ketika pekerja melakukan perawatan atau pekerjaan di dekat peralatan. Sistem LOTO melibatkan penguncian dan penandaan sumber energi peralatan untuk mencegah energi tidak sengaja menyala selama pekerjaan. Dokumen ini menjelaskan prosedur LOTO, peralatan yang dibutuhkan, serta bahaya yang mungkin timbul
Recommended
Rewriting DevOps
Six years is a long time to put up with a stack, a Senator, or an Ops approach. Craftsy has been working on a full rewrite of their core systems, and is reworking DevOps along the way. DevOps sounds good, but how do you bridge the material gap in skills and experience to bring Ops to dev, and dev to Ops? With iteration, humor, tools, and an open acceptance of failure.
Matthew Boeckman, VP - Infrastructure at Craftsy
Sandstorm or Significant? The evolving role of situational context in inciden...
Providing Situational Context to first responders is one of the most nuanced and critical success factors teams need as they manage and resolve incidents. It’s critical at all stages of incident management, from alert detection through postmortem. Provide no context, and you’ll materially impede resolution efforts. Overwhelm a team with data, and chaos ensues.
Dropped Objects Presentation - Aimed At Personnel Working In the Renewable En...
Dropped Objects Presentation - Aimed At Personnel Working In the Renewable En...Jonny Betts Grad IOSH
A brief presentation on Dropped Objects, information and prevention I created for use on an Offshore Wind Farm. Aimed at the Renewable Energy Industry, but beneficial to any industry where Working @ Height is undertaken.
As one of the highest causes of incidents at work it is vital that people are made aware of how to help prevent dropped objects from happening, as well as educated in the potential impact these objects can have.
The majority of dropped objects can be avoided with the correct mitigation and barriers in place but this will only be achieved by educating employees and employers alike to the dangers and ensuring potential issues are addressed.BLH Stop Drop safety system for all industries
simple unique design used among the industry leaders globally please pass this solution around to reduce injuries caused from Dropped Objects
Hazardous energy isolation
Hazardous energy isolation training presentation suited to heavy industry fixed and mobile plant applications. Mining industry Processing Plant specific.
Pipeline Construction Safety
The document provides guidelines on improving safety in pipeline construction. It discusses an organization called INGAA that develops safety guidelines for pipeline operators, construction companies, and equipment manufacturers. The document outlines principles of an effective safety culture and provides guidelines on excavation safety, working under utility lines, and pressure testing. For each topic, it describes hazards and recommendations. Key aspects covered include hazard assessment, roles and responsibilities, and methods to protect employees and the public. Communication is emphasized as essential for safely applying these and other construction guidelines.
ONTAP - Lock Out, Tag Out
Lock Out- Tag Out (LOTO) is the procedure to place a lock and tag on the energy source of malfunctioning industrial equipment to maintain it in a zero energy state during repairs. LOTO protects workers by locking out power to equipment before servicing and only allowing the qualified technician who removes the lock to restart it once repairs are complete. LOTO involves identifying energy sources like electricity, air, or steam; isolating them by closing valves or disconnecting lines; and applying locks and tags to prevent accidental startup until maintenance is finished.
LOTO - LOCK OUT TAG OUT
Dokumen tersebut memberikan informasi mengenai sistem Lock Out Tag Out (LOTO) yang digunakan untuk mengamankan peralatan ketika pekerja melakukan perawatan atau pekerjaan di dekat peralatan. Sistem LOTO melibatkan penguncian dan penandaan sumber energi peralatan untuk mencegah energi tidak sengaja menyala selama pekerjaan. Dokumen ini menjelaskan prosedur LOTO, peralatan yang dibutuhkan, serta bahaya yang mungkin timbul
Lockout tagout
The document discusses lockout/tagout procedures required by OSHA. It notes that written lockout/tagout programs and training are required. Every two minutes a fatality occurs and 170 injuries daily result from noncompliance. All affected employees must be notified and trained. Common energy sources like electricity must be identified, isolated through locking out or tagging out, and verified before equipment repairs. Proper lockout is crucial for safety.
An OSHA - LOTO Presentation
This presentation discusses OSHA's Lockout/Tagout standard (29 CFR 1910.147) and procedures to improve safety. It aims to help attendees understand how lockout/tagout (LOTO) is used to isolate hazardous energy sources and establish a zero energy state before maintenance to prevent injuries. LOTO is mandated by OSHA to address the top causes of accidents, which include failure to turn off equipment, accidental re-energization, and failure to dissipate stored energy. The presentation reviews how LOTO is applied in various industries and outlines OSHA's LOTO requirements and affected worker roles to ensure compliance.
8 steps-to-ensure-proper-lockout-tagout
Creative Safety Supply shares how you best to proceed with a Lockout Tagout scenario, ensuring the highest level of safety for your workers and employees. Are you following these standardized safe steps? https://www.lean-news.com/tools-continuous-improvement/
If you want to see some LOTO accessories, equipment and devices used to ensure compliance with standard safe identification, shutdown and maintenance of a defect piece of equipment, than read through this slide deck.
Lockout tagout
The document summarizes OSHA's lockout/tagout standard 1910.147. It covers the scope of the standard, definitions of key terms, requirements for an energy control program including procedures, training, periodic inspections, protective materials and devices. It describes the application and removal of lockout/tagout controls and exceptions for testing, outside personnel, group lockouts and shift changes. The overall purpose is to establish procedures to prevent unexpected startup of machines during service or maintenance which could cause injury to employees.
Lockout/Tagout Training (Contractor Version)
This training presentation targeted at Contractors and Electricians covers the importance of Lockout/Tagout as a form of mitigation, the necessary elements of an effective program for the control of hazardous energy along with the means of handling special cases within the program.
OSHA Construction Safety for Vehicles, Mobile Equipment, and Machinery
OSHA Construction Safety for Vehicles, Mobile Equipment, and MachineryThe Windsdor Consulting Group, Inc.
This document discusses operating heavy equipment safely around ground personnel. It identifies many types of heavy equipment that require safe operation near workers on foot. The goal is to prevent accidents between moving equipment and ground workers by ensuring operators can see workers and workers can be seen. Common causes of accidents are discussed, such as runovers from dump trucks backing up. The document provides guidance on management commitment, employee involvement, hazard controls, training, and operator responsibilities to help achieve a safe worksite where the risk of being struck by equipment is minimized.LOTO Training
Lock Out Tag Out (LOTO) is an important safety procedure to prevent unexpected startup of machines and equipment during service or maintenance. It involves shutting down and isolating machines, applying personal lockout devices, releasing stored energy, and verifying isolation before work. The six key steps are: 1) prepare for shutdown, 2) shutdown equipment, 3) isolate energy sources, 4) apply locks and tags, 5) release stored energy, and 6) verify isolation. Proper LOTO training and compliance is needed to protect authorized and affected employees from hazardous energy during service and maintenance work.
Facts of Life - a Talk for Boys on sex education
The document provides information about puberty and adolescence for young people. It discusses the physical, emotional, and social changes that occur during this time, and emphasizes the importance of obtaining accurate information about sexuality from reliable sources like parents and books. The document also aims to reduce stigma and misconceptions by normalizing common experiences like erections, wet dreams, and masturbation.
Occupational Safety and Health Management in Construction Industry
Management of occupational safety and health in construction industry. Module consists of related rules and regulations, OSHMS and HIRARC in work place. Discuss on OSHA 1994 and FMA 1967.
More Related Content
Viewers also liked
Lockout tagout
The document discusses lockout/tagout procedures required by OSHA. It notes that written lockout/tagout programs and training are required. Every two minutes a fatality occurs and 170 injuries daily result from noncompliance. All affected employees must be notified and trained. Common energy sources like electricity must be identified, isolated through locking out or tagging out, and verified before equipment repairs. Proper lockout is crucial for safety.
An OSHA - LOTO Presentation
This presentation discusses OSHA's Lockout/Tagout standard (29 CFR 1910.147) and procedures to improve safety. It aims to help attendees understand how lockout/tagout (LOTO) is used to isolate hazardous energy sources and establish a zero energy state before maintenance to prevent injuries. LOTO is mandated by OSHA to address the top causes of accidents, which include failure to turn off equipment, accidental re-energization, and failure to dissipate stored energy. The presentation reviews how LOTO is applied in various industries and outlines OSHA's LOTO requirements and affected worker roles to ensure compliance.
8 steps-to-ensure-proper-lockout-tagout
Creative Safety Supply shares how you best to proceed with a Lockout Tagout scenario, ensuring the highest level of safety for your workers and employees. Are you following these standardized safe steps? https://www.lean-news.com/tools-continuous-improvement/
If you want to see some LOTO accessories, equipment and devices used to ensure compliance with standard safe identification, shutdown and maintenance of a defect piece of equipment, than read through this slide deck.
Lockout tagout
The document summarizes OSHA's lockout/tagout standard 1910.147. It covers the scope of the standard, definitions of key terms, requirements for an energy control program including procedures, training, periodic inspections, protective materials and devices. It describes the application and removal of lockout/tagout controls and exceptions for testing, outside personnel, group lockouts and shift changes. The overall purpose is to establish procedures to prevent unexpected startup of machines during service or maintenance which could cause injury to employees.
Lockout/Tagout Training (Contractor Version)
This training presentation targeted at Contractors and Electricians covers the importance of Lockout/Tagout as a form of mitigation, the necessary elements of an effective program for the control of hazardous energy along with the means of handling special cases within the program.
OSHA Construction Safety for Vehicles, Mobile Equipment, and Machinery
OSHA Construction Safety for Vehicles, Mobile Equipment, and MachineryThe Windsdor Consulting Group, Inc.
This document discusses operating heavy equipment safely around ground personnel. It identifies many types of heavy equipment that require safe operation near workers on foot. The goal is to prevent accidents between moving equipment and ground workers by ensuring operators can see workers and workers can be seen. Common causes of accidents are discussed, such as runovers from dump trucks backing up. The document provides guidance on management commitment, employee involvement, hazard controls, training, and operator responsibilities to help achieve a safe worksite where the risk of being struck by equipment is minimized.LOTO Training
Lock Out Tag Out (LOTO) is an important safety procedure to prevent unexpected startup of machines and equipment during service or maintenance. It involves shutting down and isolating machines, applying personal lockout devices, releasing stored energy, and verifying isolation before work. The six key steps are: 1) prepare for shutdown, 2) shutdown equipment, 3) isolate energy sources, 4) apply locks and tags, 5) release stored energy, and 6) verify isolation. Proper LOTO training and compliance is needed to protect authorized and affected employees from hazardous energy during service and maintenance work.
Facts of Life - a Talk for Boys on sex education
The document provides information about puberty and adolescence for young people. It discusses the physical, emotional, and social changes that occur during this time, and emphasizes the importance of obtaining accurate information about sexuality from reliable sources like parents and books. The document also aims to reduce stigma and misconceptions by normalizing common experiences like erections, wet dreams, and masturbation.
Occupational Safety and Health Management in Construction Industry
Management of occupational safety and health in construction industry. Module consists of related rules and regulations, OSHMS and HIRARC in work place. Discuss on OSHA 1994 and FMA 1967.
Viewers also liked (9)
OSHA Construction Safety for Vehicles, Mobile Equipment, and Machinery
OSHA Construction Safety for Vehicles, Mobile Equipment, and Machinery
Occupational Safety and Health Management in Construction Industry
Occupational Safety and Health Management in Construction Industry
DROPS Training Certificate
- 1. Has successfully completed 1. What is a Dropped Object 2. Consequences of Dropped Objects 3. Common Causes of Dropped Objects 4. Management of Dropped Objects 5. Prevention of Dropped Objects 6. End of Course Assessment Date issued Signed: __________________ Mark Chandler Operations Director Expires Form QA-388 Rev 01 Amol Deshmukh Dropped Objects Awareness and Prevention E-Learning 17/11/2015 17/11/2018