Dennis Magnaye is an experienced auditor and consultant seeking a position utilizing his qualifications in quality assurance and control. He has over 20 years of experience auditing quality management systems and products in various industries. His expertise includes ISO 9001, ISO 17025, ISO 14001, and ISO 18001 standards. He is a licensed mechanical engineer in the Philippines with experience in design, construction, and project management.

1. DENNIS L. MAGNAYE
E-mail address: dlmagnaye@yahoo.com
Mobile Nos. +971 50 1541695
Page 1 of 11
OBJECTIVE
To work in an organization where I can share my experiences and qualifications as an experienced
auditor and consultant for Quality Assurance and Quality Control processes to help in achieving the
established targets and at the same time learn additional information that will help me in my
professional life.
SUMMARY OF QUALIFICATIONS
 LEAD AUDITOR (Passed the Lead Auditor Training Course – Neville Clark Philippines (Accredited
by IRCA – International Registry of Certified Auditors) for Quality Management Systems
standards.
 Vast experience in the field of Quality Management Systems auditing as Quality System Auditor
for Third Party Product Certification (deformed steel bars for concrete reinforcement; plastic
pipes and fittings for water & industrial application; steel, galvanized and black iron pipes and
fittings; coated steel sheets; steel wire nails; steel wires for pre cast & post tensioning;
pneumatic tires; LPG steel cylinders for household and automotive use, different types of
thermal insulation products, solar collectors for solar water heating systems, ready mix
concretes, pre cast concrete blocks, among others.
 Vast experience in the design and implementation of product certification activities as per ISO
17065 that include different types of product certification schemes.
 Vast Experience in the design and establishment, documentation, implementation, and
maintenance of Quality Management System as per ISO 9001
 Vast Experience in design and establishment, documentation, implementation, and maintenance
of Laboratory & Calibration’s Quality Management System as per ISO 17025
 Vast Experience in design and establishment, documentation, implementation, and maintenance of
bodies providing inspection activities as per ISO 17020
 Vast Experience in design and establishment, documentation, implementation, and maintenance of
bodies providing audit and certification of management system as per ISO 17021

2. Page 2 of 11
 Vast experienced Auditor for Quality Management System (ISO 9001), as well as Quality Assurance
and Quality Control
 Vast Experienced Auditor for Laboratory Management System (ISO 17025), particularly for mechanical
laboratories
 Experienced Auditor for Environmental Management System (ISO 14001)
 Experienced Auditor for Occupational Health And Safety Management Systems (ISO 18001)
 Experience in design and establishment, documentation, implementation, and maintenance of
Environmental Management System as per ISO 14001
 Experience in design and establishment, documentation, implementation, and maintenance of
Occupational Health And Safety Management Systems as per ISO 18001
 Vast Experience in the products and services’ standardization process as per international practice
 Vast Experienced in the development of training modules for Standards and Conformity Assessment
Procedures (Management Systems)
 Experienced in providing trainings for standards and conformity assessment activities (Management
Systems)
 Well verse in the interpretation of international standards, foreign standards and product
specifications
 Has attended various trainings and seminars for quality management system standards and
conformity assessment procedures
 Knowledgeable in Mechanical Engineering principles and theories
 MECHANICAL ENGINEER (Passed the Philippine’s Board Examination for Mechanical Engineers) -
License Mechanical Engineer / Board Passer, October 1996, License Number 0050795
 Experienced in the Design, Implementation, Quality Assurance and Quality Control, and Supervision of
Mechanical, Plumbing, HVAC and Fire Protection Works (MEP Works)
 Experience in the interpretation of Design plan for mechanical construction
 Experience in the preparation of bill of materials and costing of Plumbing, HVAC and Fire Protection
Works (Construction Field)
 Well versed with Microsoft Office Applications (Word, Excel, Power Point, Access, Project, etc.)
 Fluent in written and oral communication in English Language
 With valid UAE Driving License (RTA License # 1312796)

3. Page 3 of 11
WORKEXPERIENCES
INSPECTION AND CERTIFICATION SECTION
DUBAI CENTRAL LABORATORY DEPARTMENT
DUBAI MUNICIPALITY
UNITED ARAB EMIRATES
Inspection and Certification Section of Dubai Central Laboratory Department (DCLD) is a Product
Certification Body (PCB) directly under Dubai Municipality. A government product certification body that
is accredited to ISO Guide 65 by Dubai Accreditation Department. The Department is involved in
calibration services, construction material testing, food testing, environmental testing, jewelry testing,
product quality certification & other activities related to Conformity Assessment.
PRODUCTS QUALITY ENGINEER – 30 June 2011 – Present
PRODUCTS QUALITY OFFICER – 30 July 2007 – 30 June 2011
 Prepare and supervise the implementation of the quality system, work plans, programs and
instructions related to the product certification activities of the DCL-ICS
 Conducts factory and product audits relative to the DCL-ICS product certification schemes
(Quality Management System & Factory Production and Quality Control)
 Conducts assessment of laboratories and inspection bodies that form part of the DCL-ICS product
certification schemes
 Prepare work plans related to the issuance of compliance certificates for products from factories
and trading shops and other imported goods within the market of Dubai; and discuss these plans
with the direct supervisor for approval and implementation
 Prepare and approve the daily and weekly working programs submitted by the concerned staff
for issuance of compliance certificates to different products and submit to the direct supervisor
for approval
 Review and check the applications for licensing and registration of factories, to assure the
compliance of these applications to the laws and legislations specified for products certification,
and to check the correctness of the data and information provided in the documents submitted,
and forward all to direct supervisor within the appropriate time
 Follow up the regular and sudden inspection plans on factories, trading shops and different
markets; for the purpose of checking their compliance to the requirements of certification
schemes

4. Page 4 of 11
 Supervise the implementation of the specific working plans and programs related to withdrawal
of samples from products subject to certification; to assure their compliance to the standard
specifications through follow up and testing and to take appropriate actions according to the
specific rules and procedures
 Inspect regularly and suddenly factories, shops and other companies under the certification
scheme; to assure their commitment and conformance to rules, specifications and conditions
required, and to submit the report of findings and proposed recommendations to the direct
supervisor
 Prepare work procedures specific for effective product quality monitoring to assure its
compliance with certification scheme requirements and submit to the direct supervisor for
approval
 Issue violations and fines according to the approved laws and regulations, to any parties under
certification schemes for any nonconformance and deviations from the standard specifications
and the criteria of approved product quality
 Submit appropriate suggestion and recommendation for the improvement of work procedures
and any other matters related to product testing and certifying, in accordance with the approved
local, regional, and international standard specifications
 Review and check the compliance certificates issued to any products from factories and shops
and forward to direct supervisor for final approval
 Review the data and information entered in the computer systems and programs which are
related to certification process and update these systems regularly and continually according to
work requirements.
 Prepare monthly and annual reports for the accomplished activities within the section in
accordance with working programs and plans, including statistical data, and to submit any
recommendations and suggestion related to improvement of work and forward to direct
supervisor on time for final approval
 Provide appropriate suggestions and recommendations to improve and develop the productivity
and work performance effectively and efficiently
 Assist in the documentation of the Quality System regarding the implementation of the
management system in accordance with the requirements of ISO Guide 65
 Do any other required tasks related to work according to need

5. Page 5 of 11
WORKEXPERIENCES
STANDARDS CONFORMITY DIVISION
BUREAU OF PRODUCT STANDARDS
DEPARTMENT OF TRADE AND INDUSTRY
PHILIPPINES
Standards Conformity Division (SCD) of Bureau of Product Standards (BPS) is directly under the
Department of Trade and Industry (DTI). BPS is the National Standards Body that is member to the
International Organization for Standardization (ISO). A government product certification body that is
accredited to ISO Guide 65 and is mandated by law to certify products within the Philippines. Bureau of
Product Standards is involved in calibration, electrical, chemical, consumer and construction material
testing, standardization, product quality certification & others.
PRODUCTS MANAGER – August 2000 - July 2007
 Reviews and evaluates ISO 9000 Quality Management System and product audit reports of
companies prior to recommendation for the issuance of the Philippine Standard (PS) Safety
and/or Quality Certification Mark License
 Plans and coordinates the Bureau’s international participation to standardization concerning the
development and implementation of memorandum of understanding/mutual recognition
arrangements (MOU/MRA) on conformity assessments
 Audits and analyzes the Quality Management System and products of companies to determine
compliance with the requirements of the PS Safety and/or Quality Certification Mark Scheme
 Reviews and evaluates technical documents of importer’s application for Import Commodity
Clearance (ICC) and results of laboratory test on its imported products as the basis for the
issuance or denial of the ICC and the subject product
 Conducts product inspection and sampling for the necessary independent test to determine
product compliance with the specific standard
 Witnesses in-plant testing in the company or independent testing at the BPS accredited or
recognized testing laboratories in relation to the product assessment
 Render technical assistance and guidance to clients on the requirements of standards and the
Bureau’s product certification schemes
 Conducts investigation and gives technical opinion on complaints regarding product safety and
quality

6. Page 6 of 11
 Assist the senior staff in, among others, the conduct of seminars and dialogues with industry
sectors and other government agencies in matters of mandatory standards implementation
 Documents guidelines, procedure relative to the implementation of the Product Certification
activities of the Bureau of Product Standards
 Conducts assessment to the BPS sub-contractors relative the implementation of its Product
Certification Scheme as per international standards such as ISO 17025 and ISO 17020
 Conducts on site assessment on the Philippines Accreditation Office’ applicants for Laboratory
Accreditation as per ISO 17025

7. Page 7 of 11
WORKEXPERIENCES
STANDARDS DEVELOPMENT DIVISION
BUREAU OF PRODUCT STANDARDS
DEPARTMENT OF TRADE AND INDUSTRY
PHILIPPINES
Standards Development Division (SDD) of Bureau of Product Standards (BPS) is directly under the
Department of Trade and Industry (DTI). BPS is the National Standards Body that is member to the
International Organization for Standardization (ISO). As a National Standards Body, it is in charge of
developing Philippine National Standards. Bureau of Product Standards is involved in calibration,
electrical, chemical, consumer and construction material testing, standardization, and product quality
certification & others.
PROJECTS OFFICER – November 1998 - July 2000
 Conducts researches on the products to be standardized and evaluating specifications,
procedures, test methods and sampling procedures. Conducts study, evaluation and making
comparative analysis on the technical differences of international and other foreign standards for
the Technical Committee’s deliberation
 Formulate Philippine National Standards through standardization in the Technical Committee for
the use of the industries
 Help the industries to be globally competitive through the alignment of PNS with the ISO
standards
 Voting on NWIP, ISO/CD, ISO/DIS, ISO/FDIS after consultation with the industries concerned
 BPS/Technical Committee (TC) handled,
1. BPS/TC 6 Gas Cylinders
2. BPS/TC 11 Steels
2.1 SC 1 Long Products (deformed steel bars)
2.2 SC 2 Flat Products (Metal Sheets)
3 BPS/TC 61 Ferrous Pipes and Fittings
3.1 SC 1 Steel Pipes and Tubes
3.2 SC 2 Cast Iron Pipes, Fittings and their Joints

8. Page 8 of 11
 ISO/Technical Committee handled,
1. ISO/TC 5 Metallic Pipes and Metallic Fittings
2. ISO/TC 11 Boilers and Pressure Vessels
3. ISO/TC 17 Steels
4. ISO /TC 44 Welding and Allied Processes
5. ISO/TC 58 Gas Cylinder
6. ISO /TC 135 Non-destructive Testing
 Attending Inter-Agency meeting as assigned by my Supervisor in relation to standardization activities

9. Page 9 of 11
WORKEXPERIENCES
MAGNACOR CONSTRUCTION AND DEVELOPMENT CORPORATION
PHILIPPINES
July 1997 – October 1998
Magnacor Construction and Development Corporation (MCDC) is a private construction organization
engage in the design, construction, supervision, and maintenance of vertical construction works. Its
scope covers Mechanical and Electro- Mechanical works such as Heating Ventilating and Air Conditioning
(HVAC), Fire Protection, Plumbing & Sanitary, and Civil Works.
COST ENGINEER
 In charge of the preparation of the budgetary proposal for the bidding of HVAC, fire protection
and plumbing works in the construction such as the itemized breakdown of materials, labors and
miscellaneous materials
 Attendance during the pre-bidding and post bidding activities together with the Project Management
group and the Owner to discuss with them the technical specification of the products to be used on
the jobsite
DESIGN ENGINEER
 In charge of the preparation of the design calculations, material specifications and design plans for the
HVAC, fire protection and plumbing works
PROJECT ENGINEER
 Project Supervision to make sure that the scope of works are finished on time
 Preparation of the bar chart to guide the supervisor and his staff on the project duration
 Inspection of the materials delivered on site to check for its conformance to product
specifications
 Preparation of the billing statements of the works done in percentage of the total works
(percentage billing)

10. Page 10 of 11
WORKEXPERIENCES
RAYCOR AIRCONTROL SYSTEM
PHILIPPINES
November 1996 – June 1997
RAYCOR AIRCONTROL SYSTEM is a private construction organization engage in the design, construction,
supervision, and maintenance of vertical construction works. Its scope covers Mechanical and Electro-
Mechanical works such as Heating Ventilating and Air Conditioning (HVAC).
COST ENGINEER
 In charge of the preparation of the budgetary proposal for the bidding of HVAC, fire protection
and plumbing works in the construction such as the itemized breakdown of materials, labors and
miscellaneous materials
 Attendance during the pre-bidding and post bidding activities together with the Project Management
group and the Owner to discuss with them the technical specification of the products to be used on
the jobsite
DESIGN ENGINEER
 In charge of the preparation of the design calculations, material specifications and design plans for the
heating, ventilating and air conditioning units (HVAC)

11. Page 11 of 11
EDUCATIONALQUALIFICATIONS
BACHELOR OF SCIENCE IN MECHANICAL ENGINEERING
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
1991-1996
LIPA CITY SCIENCE HIGH SCHOOL
SECONDARY EDUCATION
SCHOLAR
1987-1991
PADRE IMO LUNA MEMORIAL ELEMENTARY SCHOOL
PRIMARY EDUCATION
10th
Honor
1981-1987
PROFESSIONALQUALIFICATIONS
MECHANICAL ENGINEERING LICENSURE EXAMINATION
PHILIPPINE PROFESSIONAL REGULATORY COMMISSION (PRC) LICENSE # 0050795 (NOVEMBER 1996)
LEAD ASSESSOR TRAINING COURSE (ISO 9001)
NEVILLE CLARK PHILIPPINES (ACCREDITED BY IRCA)
PROFESSIONALINFORMATIONS
NATIONALITY : FILIPINO
BIRTHDATE : 23 SEPTEMBER 1974
BIRTHPLACE : SAN JOSE, BATANGAS, PHILIPPINES
HEIGHT : 165 CM
WEIGHT : 70 KG
PASSPORT NO. : EB8141963