Diesel Lubricity Improver | Petroleum Logistics
•
0 likes•6 views
The Diesel Lubricity Improvers offered by Petroleum Logistics provide boundary lubrication between moving fuel system components. We want to assist refiners in meeting the demands for fuel lubricity in the present while preparing for cleaner-burning fuels in the future. To prevent early wear on parts like fuel injector pumps and injectors, gasoline must fulfill minimum lubricity criteria.
Report
Share
Report
Share
Download to read offline
Recommended
IRJET- Engine Oil Color Monitoring System
This document describes a system to monitor engine oil condition using a turbidity sensor and microcontroller. The system takes oil samples at intervals of 2000km and 3000km from a vehicle. A turbidity sensor measures the sample's turbidity and a microcontroller controls LEDs to indicate the oil condition - green for fresh, blue for medium usage, and red for heavily used. The system aims to help owners change oil only when fully used to avoid unnecessary changes. It was developed by engineering students and described turbidity sensing and microcontroller components used to monitor engine oil degradation over mileage.
Lubrication Engineers Inc.Green Fleet Management
This document describes a fleet management program that aims to make fleets more efficient and environmentally friendly. It discusses challenges facing fleet operators related to costs and sustainability. The program focuses on condition-based maintenance using oil analysis to safely extend oil change intervals. Using enhanced lubricants can increase reliability and asset life while reducing waste. Implementing best practices for fuel quality, lubricant selection, storage, and training can help fleets maximize their green potential and reduce operating costs over time.
improving fuel efficiency of motorcycle oils final
New technology development for the fuel and lubricants in the automotive industry specifically motorcycle oil
0s lubrication+&+maintenance
This document provides information about lubrication and maintenance for vehicles. It includes sections about fluid types and specifications, fluid fill/check locations, and recommended maintenance schedules. The maintenance schedules list routine maintenance to be done either every 7,500 miles or 6,000 miles depending on vehicle use conditions. Emission control system maintenance must be done as specified to ensure proper functioning of the emissions system.
Bio-lubricants for Tropics to Save Energy and Environment
Engine oil is comprised of a base fluid enhanced with additives. We developed a novel bio-based additive pack for engine oils. It comprises neither Sulfur nor Phosphorus and enables application of palm olein as a base fluid for tropical countries. Such bio-oil enhances fuel economy of an engine up to 30% and radically extends longevity of the engine as wear rate can be 25-50 (!) times slower in comparison with the best synthetic engine oils. We work on similar bio-oils for countries with moderate climate too.
Fundamentals of Lubrication for CADPI.pdf
The document provides an overview of lubrication topics including definitions of lubricants and their functions, types of friction, lubrication regimes, importance of viscosity, API ratings, lubricant formulations, additives, international standards, service categories, and Phoenix's product portfolio. It describes key lubrication concepts such as the different lubrication regimes, factors that influence viscosity selection, additive functions, and performance standards for various Phoenix lubricant products.
ENGINE OIL, Coolant, AC.pptx
Engine oil provides protection, cooling, and lubrication to engine parts to increase engine life and performance. Viscosity is important for oil to properly flow and lubricate. Different types of base oils include mineral, synthetic, and semi-synthetic. Engine oil ratings like API, ILSAC, and ACEA indicate standards and specifications. Brake fluid transfers pressure in the brake lines and must meet DOT standards for moisture resistance. Coolant is a mixture of water and antifreeze that circulates through the engine to regulate temperature. Automotive air conditioning uses refrigerants like R134a in a closed loop system involving a compressor, condenser, expansion valve, and evaporator to cool and dehumidify air
Tbn the right oil for the right application lubrizol-2007
The document discusses total base number (TBN) in engine oils. Tighter emissions regulations are increasing performance requirements for oils. TBN is a key part of balancing oil formulations to meet specifications related to durability, emissions control, and fuel economy. The two common methods for measuring TBN - ASTM D2896 and D4739 - respond differently to different acid sources, with D4739 capturing depletion from more acid types. Field tests show TBN decreases over time with engine use, demonstrating the need to carefully manage TBN levels to prevent damage.
Recommended
IRJET- Engine Oil Color Monitoring System
This document describes a system to monitor engine oil condition using a turbidity sensor and microcontroller. The system takes oil samples at intervals of 2000km and 3000km from a vehicle. A turbidity sensor measures the sample's turbidity and a microcontroller controls LEDs to indicate the oil condition - green for fresh, blue for medium usage, and red for heavily used. The system aims to help owners change oil only when fully used to avoid unnecessary changes. It was developed by engineering students and described turbidity sensing and microcontroller components used to monitor engine oil degradation over mileage.
Lubrication Engineers Inc.Green Fleet Management
This document describes a fleet management program that aims to make fleets more efficient and environmentally friendly. It discusses challenges facing fleet operators related to costs and sustainability. The program focuses on condition-based maintenance using oil analysis to safely extend oil change intervals. Using enhanced lubricants can increase reliability and asset life while reducing waste. Implementing best practices for fuel quality, lubricant selection, storage, and training can help fleets maximize their green potential and reduce operating costs over time.
improving fuel efficiency of motorcycle oils final
New technology development for the fuel and lubricants in the automotive industry specifically motorcycle oil
0s lubrication+&+maintenance
This document provides information about lubrication and maintenance for vehicles. It includes sections about fluid types and specifications, fluid fill/check locations, and recommended maintenance schedules. The maintenance schedules list routine maintenance to be done either every 7,500 miles or 6,000 miles depending on vehicle use conditions. Emission control system maintenance must be done as specified to ensure proper functioning of the emissions system.
Bio-lubricants for Tropics to Save Energy and Environment
Engine oil is comprised of a base fluid enhanced with additives. We developed a novel bio-based additive pack for engine oils. It comprises neither Sulfur nor Phosphorus and enables application of palm olein as a base fluid for tropical countries. Such bio-oil enhances fuel economy of an engine up to 30% and radically extends longevity of the engine as wear rate can be 25-50 (!) times slower in comparison with the best synthetic engine oils. We work on similar bio-oils for countries with moderate climate too.
Fundamentals of Lubrication for CADPI.pdf
The document provides an overview of lubrication topics including definitions of lubricants and their functions, types of friction, lubrication regimes, importance of viscosity, API ratings, lubricant formulations, additives, international standards, service categories, and Phoenix's product portfolio. It describes key lubrication concepts such as the different lubrication regimes, factors that influence viscosity selection, additive functions, and performance standards for various Phoenix lubricant products.
ENGINE OIL, Coolant, AC.pptx
Engine oil provides protection, cooling, and lubrication to engine parts to increase engine life and performance. Viscosity is important for oil to properly flow and lubricate. Different types of base oils include mineral, synthetic, and semi-synthetic. Engine oil ratings like API, ILSAC, and ACEA indicate standards and specifications. Brake fluid transfers pressure in the brake lines and must meet DOT standards for moisture resistance. Coolant is a mixture of water and antifreeze that circulates through the engine to regulate temperature. Automotive air conditioning uses refrigerants like R134a in a closed loop system involving a compressor, condenser, expansion valve, and evaporator to cool and dehumidify air
Tbn the right oil for the right application lubrizol-2007
The document discusses total base number (TBN) in engine oils. Tighter emissions regulations are increasing performance requirements for oils. TBN is a key part of balancing oil formulations to meet specifications related to durability, emissions control, and fuel economy. The two common methods for measuring TBN - ASTM D2896 and D4739 - respond differently to different acid sources, with D4739 capturing depletion from more acid types. Field tests show TBN decreases over time with engine use, demonstrating the need to carefully manage TBN levels to prevent damage.
Power Oil And Lubes PPT
This document discusses lubrication of medium speed diesel engines. It covers topics like the properties required for lubrication in internal combustion engines including bearing lubrication, piston cooling, cylinder lubrication, and cam shaft/gear lubrication. It also discusses recent engine design trends that impact lubrication like higher combustion pressures and describes how this affects properties like viscosity and detergency needed in lubricating oils. The document provides an overview of used oil analysis and how it can help identify issues like ingression of fuel or combustion byproducts into the oil from sources like leakage. It provides an example analysis of engine #1 where rises in viscosity and drops in base number indicate likely fuel ingression that could be addressed by identifying and fixing the ingress source.
XFT_Commercial_Introduction_White_Paper
This document introduces Xtreme Fuel Treatment, a fuel additive distributed by Syntek Global, to commercial and industrial users. It details results from testing showing improvements in fuel economy, emissions reductions, decreased maintenance costs, and overall savings. The summary provides an overview of the product's benefits and performance based on evaluations in the trucking, transportation, mining, construction and power generation industries.
Bypass Filtration in Diesel Engine
Close analysis of oil purification system used in diesel engines and the role of bypass filtration system in contamination control
Engine Oil
a presentation about ( Engine Oil ) to Petrochemical lecture
Outline:
• Engine oil introduction
• Types of Engine Oil
• Oil Consumption for cars
• What are the reasons for high oil consumption in cars?
• What is motor oil?
• Detergents
• Anti - wear additives
• Modifiers
• Anti - Foam additives
• Rust & corrosion
• Viscosity index improves
• Pour - point depressant
Hope you like it and benefits you.
Toronto future directions - 2015
The document summarizes a presentation given by Lubrizol Corporation on industry trends related to efficiency and implications for lubricants. Key points include: regulations are driving improvements in efficiency to reduce emissions; testing methods need to evolve to measure efficiency gains from lubricants; lubricants must balance the demands of thinner viscosities to reduce friction while still protecting engines under more demanding conditions.
Fuel Management
This document summarizes the results of a study testing the effects of Hydrotex synthetic lubricants versus mineral oil-based lubricants on fuel economy. The study found that the Hydrotex lubricants improved fuel economy by over 5%, which more than pays for the cost of the synthetic lubrication program. It also reduced emissions. A separate study on diesel fuel additives found they improved fuel economy by 4-10% and reduced particulate matter by up to 71% and other emissions. The additives were also found to clean fuel injectors and fuel systems.
Implications Of ULSD Or Low Sulphur Regime
The document discusses the implications of removing sulphur from diesel and gasoline fuels under the Euro IV fuel regime. Sulphur is removed through hydro-treatment at refineries to reduce emissions, but this removal also eliminates natural lubricity compounds and conductivity properties. As a result, lubricity and static dissipater additives are now required to be dosed. The removal of sulphur also promotes microbial growth, requiring biocides to be added. After-treatment additives are now necessary to provide functions like cleaning, lubrication, and conductivity that were previously inherent in fuels.
BIO2.1 Understanding Diesel Fuel
The document provides an overview of biodiesel technical training on understanding diesel fuel presented by the National Biodiesel Board. It discusses the objectives to understand diesel and biodiesel fuel quality standards and their effects on engine performance and emissions. Key points covered include ASTM fuel specifications for diesel including cetane number, distillation temperatures, viscosity, carbon residue and sulfur content which impact engine operation. It also discusses emissions regulations that have made diesel fuel requirements more stringent over time.
Alfa laval-tratamiento-de-oil-modelo-p-y-s
This document provides technical information about Alfa Laval's S-separator and P-separator systems for treating fuel and lubricating oils on ships and in power plants. It describes the characteristics of different types of oils, including heavy fuel oils, marine diesel oils, and lubricating oils. It explains that conventional purifier systems have limitations in treating heavy fuel oils over 991 kg/m3 density, while the S-separator uses Alcap technology to automatically adjust to various oil properties. The P-separator is designed for lighter, more consistent oils. Both separators offer improved separation efficiency and reduced operating costs compared to previous models.
Lubrication fundamentals
Lubrication is one of the main preventative maintenance activities.
Lubricants have a wide range of properties that impact their physical and chemical properties Knowing about these properties is important in determining which lubricant is best for which situation.
Oil analysis identifies early signs of contamination, fluid degradation and abnormal wear before they cause costly and permanent damage to equipment.
summer Training report
The document provides an acknowledgement expressing gratitude to various individuals who supported a project. It thanks the principal, project director, head of department, project instructor, HR manager, and other lecturers for their advice, support, feedback, and encouragement. It also thanks friends for their inspiration and cooperation and parents for their constant encouragement and support, which were important for the project's success.
Enhancement in viscosity of diesel by adding vegetable oil
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
International Journal of Engineering and Science Invention (IJESI)
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Tata motors workshop
The document provides information about Tata Motors including:
- It was founded in 1945 by J.R.D. Tata and is headquartered in Mumbai.
- Tata Motors produces automobiles and engines and owns Jaguar & Land Rover. Some of its popular vehicles include commercial, passenger, and utility vehicles.
- Ratan Tata, who received several prestigious awards for his work, served as the chairman of Tata Motors.
Engine Oil Categories 2013
This document discusses motor oil selection and provides information about API and ILSAC certification marks that identify quality motor oils. It outlines the current and obsolete API service categories and ILSAC standards that oils may be rated for, noting the performance characteristics of each. The document advises following vehicle manufacturer recommendations for oil viscosity and certification standards.
Fuel additives
This document discusses fuel additives and when they are needed or not needed. It states that fuel additives are available for petrol and diesel engines in India and are made by companies like Chevron and 3M. The primary functions of additives are to clean fuel injectors, reduce exhaust gases, and prevent corrosion. Additives can boost performance and efficiency while extending engine life. Additives may be needed in extreme hot or cold weather, especially anti-gel additives for diesel in cold weather. Additives can also be used when a vehicle will be idle for a long time to help it start smoothly. New vehicles generally do not need additives for the first 1-2 years, and additives should be avoided while a vehicle
Report on Summer Training by Sayan Roy
The document provides details about the author's summer training at an Indian Oil Corporation lube blending plant. It describes the plant's production capacity and certification. It then discusses the process of blending lubricants which involves storing base oils and additives in tanks, blending them in kettles, and packaging the finished lubricants. Quality control and safety procedures are also summarized. The document includes sections on the definition and purpose of lubricants, their classifications, and the types of base oils used.
45 s. d. mane
The document describes the design of an oil-fired furnace for heating applications such as heat treatment and metal melting in foundries. It includes details of the used engine oil characteristics, burner design dimensions, and furnace construction to allow for swirling flame propagation and even heating. Testing showed successful aluminum melting could be achieved using the furnace, addressing issues with traditional solid fuels and providing productive use of waste engine oil.
Engine Oil Additive FM (1016)
Engine Oil Additive - FM is available in two blends: FM-Conditioner and FM-Protect. FM-Conditioner conditions worn engine components over 1,500-2,000 miles prior to using FM-Protect long term. Both blends contain nanodiamonds in a graphene shell that deliver benefits like friction reduction, increased load bearing capability, reduced pollution, temperature stability, and extended engine and oil life. Engine Oil Additive - FM can be added to gasoline or diesel engines and is recommended in amounts ranging from 1.6 to 15 oz depending on engine oil capacity. Independent laboratory testing confirms the product's performance claims.
DRY SUMP LUBRICATING SYSTEM BY G.DINESHPIRAN
This document discusses dry sump lubricating systems. It describes how a dry sump system works by using a scavenging pump to draw oil from the engine crankcase into an external oil tank, and then an oil pump circulates the oil through the engine. Dry sump systems are used in large stationary, marine, and aircraft engines because they allow for more engine layout flexibility. The document also covers the basic functions and properties of engine lubricating oil, including viscosity and pour point, and discusses different types of lubricating oils like mineral and vegetable oils as well as common lubricating oil additives.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
More Related Content
Similar to Diesel Lubricity Improver | Petroleum Logistics
Power Oil And Lubes PPT
This document discusses lubrication of medium speed diesel engines. It covers topics like the properties required for lubrication in internal combustion engines including bearing lubrication, piston cooling, cylinder lubrication, and cam shaft/gear lubrication. It also discusses recent engine design trends that impact lubrication like higher combustion pressures and describes how this affects properties like viscosity and detergency needed in lubricating oils. The document provides an overview of used oil analysis and how it can help identify issues like ingression of fuel or combustion byproducts into the oil from sources like leakage. It provides an example analysis of engine #1 where rises in viscosity and drops in base number indicate likely fuel ingression that could be addressed by identifying and fixing the ingress source.
XFT_Commercial_Introduction_White_Paper
This document introduces Xtreme Fuel Treatment, a fuel additive distributed by Syntek Global, to commercial and industrial users. It details results from testing showing improvements in fuel economy, emissions reductions, decreased maintenance costs, and overall savings. The summary provides an overview of the product's benefits and performance based on evaluations in the trucking, transportation, mining, construction and power generation industries.
Bypass Filtration in Diesel Engine
Close analysis of oil purification system used in diesel engines and the role of bypass filtration system in contamination control
Engine Oil
a presentation about ( Engine Oil ) to Petrochemical lecture
Outline:
• Engine oil introduction
• Types of Engine Oil
• Oil Consumption for cars
• What are the reasons for high oil consumption in cars?
• What is motor oil?
• Detergents
• Anti - wear additives
• Modifiers
• Anti - Foam additives
• Rust & corrosion
• Viscosity index improves
• Pour - point depressant
Hope you like it and benefits you.
Toronto future directions - 2015
The document summarizes a presentation given by Lubrizol Corporation on industry trends related to efficiency and implications for lubricants. Key points include: regulations are driving improvements in efficiency to reduce emissions; testing methods need to evolve to measure efficiency gains from lubricants; lubricants must balance the demands of thinner viscosities to reduce friction while still protecting engines under more demanding conditions.
Fuel Management
This document summarizes the results of a study testing the effects of Hydrotex synthetic lubricants versus mineral oil-based lubricants on fuel economy. The study found that the Hydrotex lubricants improved fuel economy by over 5%, which more than pays for the cost of the synthetic lubrication program. It also reduced emissions. A separate study on diesel fuel additives found they improved fuel economy by 4-10% and reduced particulate matter by up to 71% and other emissions. The additives were also found to clean fuel injectors and fuel systems.
Implications Of ULSD Or Low Sulphur Regime
The document discusses the implications of removing sulphur from diesel and gasoline fuels under the Euro IV fuel regime. Sulphur is removed through hydro-treatment at refineries to reduce emissions, but this removal also eliminates natural lubricity compounds and conductivity properties. As a result, lubricity and static dissipater additives are now required to be dosed. The removal of sulphur also promotes microbial growth, requiring biocides to be added. After-treatment additives are now necessary to provide functions like cleaning, lubrication, and conductivity that were previously inherent in fuels.
BIO2.1 Understanding Diesel Fuel
The document provides an overview of biodiesel technical training on understanding diesel fuel presented by the National Biodiesel Board. It discusses the objectives to understand diesel and biodiesel fuel quality standards and their effects on engine performance and emissions. Key points covered include ASTM fuel specifications for diesel including cetane number, distillation temperatures, viscosity, carbon residue and sulfur content which impact engine operation. It also discusses emissions regulations that have made diesel fuel requirements more stringent over time.
Alfa laval-tratamiento-de-oil-modelo-p-y-s
This document provides technical information about Alfa Laval's S-separator and P-separator systems for treating fuel and lubricating oils on ships and in power plants. It describes the characteristics of different types of oils, including heavy fuel oils, marine diesel oils, and lubricating oils. It explains that conventional purifier systems have limitations in treating heavy fuel oils over 991 kg/m3 density, while the S-separator uses Alcap technology to automatically adjust to various oil properties. The P-separator is designed for lighter, more consistent oils. Both separators offer improved separation efficiency and reduced operating costs compared to previous models.
Lubrication fundamentals
Lubrication is one of the main preventative maintenance activities.
Lubricants have a wide range of properties that impact their physical and chemical properties Knowing about these properties is important in determining which lubricant is best for which situation.
Oil analysis identifies early signs of contamination, fluid degradation and abnormal wear before they cause costly and permanent damage to equipment.
summer Training report
The document provides an acknowledgement expressing gratitude to various individuals who supported a project. It thanks the principal, project director, head of department, project instructor, HR manager, and other lecturers for their advice, support, feedback, and encouragement. It also thanks friends for their inspiration and cooperation and parents for their constant encouragement and support, which were important for the project's success.
Enhancement in viscosity of diesel by adding vegetable oil
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
International Journal of Engineering and Science Invention (IJESI)
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Tata motors workshop
The document provides information about Tata Motors including:
- It was founded in 1945 by J.R.D. Tata and is headquartered in Mumbai.
- Tata Motors produces automobiles and engines and owns Jaguar & Land Rover. Some of its popular vehicles include commercial, passenger, and utility vehicles.
- Ratan Tata, who received several prestigious awards for his work, served as the chairman of Tata Motors.
Engine Oil Categories 2013
This document discusses motor oil selection and provides information about API and ILSAC certification marks that identify quality motor oils. It outlines the current and obsolete API service categories and ILSAC standards that oils may be rated for, noting the performance characteristics of each. The document advises following vehicle manufacturer recommendations for oil viscosity and certification standards.
Fuel additives
This document discusses fuel additives and when they are needed or not needed. It states that fuel additives are available for petrol and diesel engines in India and are made by companies like Chevron and 3M. The primary functions of additives are to clean fuel injectors, reduce exhaust gases, and prevent corrosion. Additives can boost performance and efficiency while extending engine life. Additives may be needed in extreme hot or cold weather, especially anti-gel additives for diesel in cold weather. Additives can also be used when a vehicle will be idle for a long time to help it start smoothly. New vehicles generally do not need additives for the first 1-2 years, and additives should be avoided while a vehicle
Report on Summer Training by Sayan Roy
The document provides details about the author's summer training at an Indian Oil Corporation lube blending plant. It describes the plant's production capacity and certification. It then discusses the process of blending lubricants which involves storing base oils and additives in tanks, blending them in kettles, and packaging the finished lubricants. Quality control and safety procedures are also summarized. The document includes sections on the definition and purpose of lubricants, their classifications, and the types of base oils used.
45 s. d. mane
The document describes the design of an oil-fired furnace for heating applications such as heat treatment and metal melting in foundries. It includes details of the used engine oil characteristics, burner design dimensions, and furnace construction to allow for swirling flame propagation and even heating. Testing showed successful aluminum melting could be achieved using the furnace, addressing issues with traditional solid fuels and providing productive use of waste engine oil.
Engine Oil Additive FM (1016)
Engine Oil Additive - FM is available in two blends: FM-Conditioner and FM-Protect. FM-Conditioner conditions worn engine components over 1,500-2,000 miles prior to using FM-Protect long term. Both blends contain nanodiamonds in a graphene shell that deliver benefits like friction reduction, increased load bearing capability, reduced pollution, temperature stability, and extended engine and oil life. Engine Oil Additive - FM can be added to gasoline or diesel engines and is recommended in amounts ranging from 1.6 to 15 oz depending on engine oil capacity. Independent laboratory testing confirms the product's performance claims.
DRY SUMP LUBRICATING SYSTEM BY G.DINESHPIRAN
This document discusses dry sump lubricating systems. It describes how a dry sump system works by using a scavenging pump to draw oil from the engine crankcase into an external oil tank, and then an oil pump circulates the oil through the engine. Dry sump systems are used in large stationary, marine, and aircraft engines because they allow for more engine layout flexibility. The document also covers the basic functions and properties of engine lubricating oil, including viscosity and pour point, and discusses different types of lubricating oils like mineral and vegetable oils as well as common lubricating oil additives.
Similar to Diesel Lubricity Improver | Petroleum Logistics (20)
Enhancement in viscosity of diesel by adding vegetable oil
Enhancement in viscosity of diesel by adding vegetable oil
International Journal of Engineering and Science Invention (IJESI)
International Journal of Engineering and Science Invention (IJESI)
Recently uploaded
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
What do the symbols on vehicle dashboard mean?
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (17)
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
Diesel Lubricity Improver | Petroleum Logistics
- 1. DIESEL LUBRICITY IMPROVER By Petroleum Logistics 01
- 2. 02 Petroleum Logistics LUBRICITY IMPROVER DEFINITION To prevent early wear on parts like fuel injector pumps and injectors, gasoline must fulfil minimum lubricity criteria. A decrease in fuel lubricity is a normal side effect of treating fuels to remove sulphur or reduce aromatic levels. The Diesel Lubricity Improvers offered by Petroleum Logistics provide boundary lubrication between moving fuel system components. We want to assist refiners in meeting the demands for fuel lubricity in the present while preparing for cleaner- burning fuels in the future. Additionally, we hope to actively participate in the lubricity standard development process alongside the industry and its clients.
- 3. Diesel Lubricity Additive Study According to the posters, it is "known knowledge" that ULSD fuel, which contains just 15 PPM of sulphur, is insufficient to adequately lubricate a diesel engine and its parts (fuel injectors, fuel pump, etcetera). It may be true for older diesel engines, but modern diesels are built to cope with the new fuel, thus it is difficult to recommend any fuel lubricant as "essential," even though it may be useful.
- 4. 03 DIFFERENT TYPES OF METHODS HAVE BEEN DEVELOPED TO MEASURE FUEL LUBRICITY: VEHICLE TESTS The parts of the fuel system may then be dismantled and wornness assessed. The benefit of this test is that it is the most accurate representation of actual operating circumstances and that it measures all wear-related failures, not only those related to boundary lubrication. However, tests of this kind are highly costly and time-consuming and do not lend themselves to evaluating a lot of fuel mixtures. PUMP RIG TESTS A fuel injection pump is installed on a test stand and is powered by an electric motor during a pump rig test. For a certain amount of time, fuel is cycled through the pump. The pump and any connected equipment can then be taken apart and checked for wear and other negative effects.
- 5. Applications of Lubricity Improver Petroleum Logistics PRACTICAL Lubricity recovered Better engine performance Increase of engine life-time ENVIRONMENTAL Meet required lubricity specifications of low Sulphur diesel fuels Can be made from Vegetal Oil
- 6. Properties of Lubricity Improver Dry Contact or Dry Lubrication Boundary Lubrication Mixed Film Lubrication Full Film Lubrication
- 7. ONLINE FORM www.petroleumlogistics.com MOBILE PHONE +44 (0) 1206 266 75 EMAIL ADDRESS petroleumlogistics194@gmail.com CONTACT DETAILS