DICKIES WORKWEAR BUYER’S GUIDE 2019/2020
DICKIES IS THE WORLD’S LEADING PERFORMANCE WORKWEAR BRAND.
WE UNDERSTAND THAT MAKING AND SHAPING THE WORLD DEMANDS DEDICATION FROM EVERY MAN AND WOMAN WHO TAKE ON THE CHALLENGE.
ACHIEVING YOUR AMBITIONS ISN’T EASY AND NO ONE EVER SAID IT SHOULD BE. THAT’S WHY WE TAKE SUCH PRIDE IN CRAFTING WORKWEAR THAT WON’T LET YOU DOWN - WHATEVER OBSTACLES GET IN YOUR WAY.
OVER THE PAST CENTURY OUR CLOTHING, WITH ITS ICONIC DICKIES LOGO, HAS SET THE STANDARD FOR SAFETY AND COMFORT.
Different types of circular knitting machinesAbir Hasan
Its a presentation based on the most commonly used circular knitting machine - its types, difference and usage. Feel free to read and share with others. You may also find your desired presentation topic on my other slides.
Thank you.
The document discusses requirements for a good paper rewinder machine. It notes that rewinders are used to rewind defect rolls, make splices, slit rolls into narrower widths, and change roll dimensions. An effective rewinder should have large diameter drums like the main winder to produce high quality rolls at high capacity. It should also allow for fast accelerations and decelerations as well as automatic trim changes for multiple roll widths. The document provides contact information for Pekka Komulainen of Pele Oy if a rewinder with a trim width of 2500mm is needed.
1. The document describes a concrete slump test conducted by a student to determine the workability and consistency of a concrete mix.
2. The test procedure involves filling a slump cone with the concrete in layers, tamping each layer with a rod, and measuring the amount the concrete sinks after removing the cone.
3. The results of the test on a concrete mix with a water-cement ratio of 0.45 showed zero slump, indicating a dry mix suitable for road construction where vibration is used for compaction.
This document presents a study on the effectiveness and practices of knitting oil consumption in the textile industries of Bangladesh. It analyzes the oil consumption of knitting machines at two factories, Knit Concern Group and Masco Knit Group, and finds that one factory gives less oil than the standard recommended amount while the other gives more. It calculates the financial losses from deviating from the standard amounts. The conclusion suggests maintaining a standard oil feeding process for better knitting results and discussing different lubricant brands with the factories.
Chapter 5 plain and reinforced cement concrete constructionKHUSHBU SHAH
This document discusses the key ingredients and properties of reinforced cement concrete (RCC). It describes cement, aggregates, water, and steel reinforcement bars as the main ingredients. Cement acts as the binding agent. Fine and coarse aggregates provide structure and strength. Water enables the chemical reactions during curing. Steel reinforcement bars provide tensile strength to counteract the low tensile strength of concrete. The document also discusses different types of cement used for RCC, including their compositions and purposes. Testing methods for cement such as fineness, setting time, strength, and soundness are also summarized.
Acrylic fibers are synthetic fibers made from polyacrylonitrile. They are produced through a process involving polymerization, dissolving the polymer in a solvent, extruding it through a spinneret, and coagulating the filaments. Acrylic fibers are used to make clothing, home goods, and industrial materials due to their moisture wicking, colorfastness, warmth, and low cost. Common acrylic clothing includes sweaters, socks, and coats.
The document discusses the American Concrete Institute (ACI) method for concrete mix design. It begins by defining mix design as selecting ingredients and determining their proportions to produce concrete of minimum strength and durability economically. The method involves collecting data on aggregates and cement, then calculating ingredient proportions to achieve the specified compressive strength of 30 MPa while accounting for absorption and surface moisture properties. The example mix design for a water tank specifies cement at 394 kg/m3, fine aggregate at 819 kg/m3, coarse aggregate at 982 kg/m3, and water at 179 kg/m3.
Different types of circular knitting machinesAbir Hasan
Its a presentation based on the most commonly used circular knitting machine - its types, difference and usage. Feel free to read and share with others. You may also find your desired presentation topic on my other slides.
Thank you.
The document discusses requirements for a good paper rewinder machine. It notes that rewinders are used to rewind defect rolls, make splices, slit rolls into narrower widths, and change roll dimensions. An effective rewinder should have large diameter drums like the main winder to produce high quality rolls at high capacity. It should also allow for fast accelerations and decelerations as well as automatic trim changes for multiple roll widths. The document provides contact information for Pekka Komulainen of Pele Oy if a rewinder with a trim width of 2500mm is needed.
1. The document describes a concrete slump test conducted by a student to determine the workability and consistency of a concrete mix.
2. The test procedure involves filling a slump cone with the concrete in layers, tamping each layer with a rod, and measuring the amount the concrete sinks after removing the cone.
3. The results of the test on a concrete mix with a water-cement ratio of 0.45 showed zero slump, indicating a dry mix suitable for road construction where vibration is used for compaction.
This document presents a study on the effectiveness and practices of knitting oil consumption in the textile industries of Bangladesh. It analyzes the oil consumption of knitting machines at two factories, Knit Concern Group and Masco Knit Group, and finds that one factory gives less oil than the standard recommended amount while the other gives more. It calculates the financial losses from deviating from the standard amounts. The conclusion suggests maintaining a standard oil feeding process for better knitting results and discussing different lubricant brands with the factories.
Chapter 5 plain and reinforced cement concrete constructionKHUSHBU SHAH
This document discusses the key ingredients and properties of reinforced cement concrete (RCC). It describes cement, aggregates, water, and steel reinforcement bars as the main ingredients. Cement acts as the binding agent. Fine and coarse aggregates provide structure and strength. Water enables the chemical reactions during curing. Steel reinforcement bars provide tensile strength to counteract the low tensile strength of concrete. The document also discusses different types of cement used for RCC, including their compositions and purposes. Testing methods for cement such as fineness, setting time, strength, and soundness are also summarized.
Acrylic fibers are synthetic fibers made from polyacrylonitrile. They are produced through a process involving polymerization, dissolving the polymer in a solvent, extruding it through a spinneret, and coagulating the filaments. Acrylic fibers are used to make clothing, home goods, and industrial materials due to their moisture wicking, colorfastness, warmth, and low cost. Common acrylic clothing includes sweaters, socks, and coats.
The document discusses the American Concrete Institute (ACI) method for concrete mix design. It begins by defining mix design as selecting ingredients and determining their proportions to produce concrete of minimum strength and durability economically. The method involves collecting data on aggregates and cement, then calculating ingredient proportions to achieve the specified compressive strength of 30 MPa while accounting for absorption and surface moisture properties. The example mix design for a water tank specifies cement at 394 kg/m3, fine aggregate at 819 kg/m3, coarse aggregate at 982 kg/m3, and water at 179 kg/m3.
In recent years, continuous basalt fibers extruded from naturally fire-resistant basalt are attracted attention as a replacement for asbestos fibers. In the last decade, basalt has emerged as a contender in the fiber reinforcement of composites. Some manufacturer of basalts claims it offers performance similar to S-2 glass fibers at a price point between S-2 glass and E-glass, and may offer manufacturers a less-expensive alternative to carbon fiber. Basalt fibre (BF) is capable to withstand very high temperature and can act as fire blocking element.
The document discusses the paper forming process and focuses on the five zones of the forming table: entry phase, forming zone, dewatering zone, transition zone, and consolidation zone. It describes how each area impacts fiber mat formation and the development of the mat as it moves through the machine. Key aspects covered include the headbox, slice, forming board, table rolls, foils, dewatering equipment, and maintaining the proper activity level in each zone to develop the mat and remove water effectively.
This document discusses different bonding systems used in non-woven fabrics including mechanical (needle punching), chemical (adhesives), thermal (heat bonding), and mechanical/warp knitting (stitch bonding). It provides photos and definitions of non-woven fabrics and describes the manufacturing process which involves forming a web and then bonding fibers together. Key bonding methods covered are needle felting, adhesive bonding, heat bonding, and stitch bonding.
1. The winch dyeing machine dyes fabric pieces that are sewn end to end into a rope-like form.
2. The fabric rope is circulated in the dyeing machine by a horizontal rotor called a winch, which gives the machine its name.
3. The winch dyeing machine is commonly used to dye knitted, woolen, and worsted fabrics due to its ability to apply low tension on the fabric.
This document discusses silica fume, a byproduct of silicon and ferrosilicon metal production that is used to improve the properties of concrete. It defines silica fume and notes its amorphous structure and small particle size. The document outlines the metals that produce silica fume and lists its physical properties. It then explains how silica fume provides technical advantages and resource conservation when added to concrete, increasing its strength, density, and durability while reducing permeability. The document presents data showing increased concrete strengths from silica fume additions and notes its benefits for corrosion protection. It also discusses environmental benefits and cautions of using silica fume in concrete.
Scaffolding is used to provide safe elevated access to work areas. Regulations require that scaffolds be erected by competent persons and include fall protection such as guardrails and toe boards. Scaffold components include boards, guardrails, and brick guards. Common scaffold systems include cuplock and putlog configurations. Safety is paramount, as scaffolds must support all expected loads and prevent falls of workers and falling objects.
This document summarizes common plastering defects:
1. Plaster de-bonding from the background due to background movement, poor bonding, moisture issues, or thick plaster application. Prevention involves cleaning, drying walls, and applying bonding agents.
2. Bond failure between finish plaster and cement undercoat from applying plaster over a wet undercoat or lack of keying. Stripping and re-plastering is needed after drying.
3. Cracking occurs from structural movement or drying shrinkage. Structural cracks follow building cracks while drying cracks are hairline. High cement or rapid drying can cause non-structural cracks.
This document discusses glass fiber reinforced concrete (GFRC). It defines GFRC as a composite material made of cement, mortar or concrete mixed with discrete glass fibers. The fibers improve several properties of concrete including tensile strength, durability, and crack resistance. Different types of glass fibers are described as well as factors that influence GFRC properties. Common applications mentioned include architectural elements, interior/exterior details, and fire resistant structures.
properties and application of technical textile fibersShahriar Shovon
Technical fiber or High functional fibers
High functional fibers are those, which have high technical properties based on the end uses. The properties are high tensile strength, high modulus, good chemical resistance, high dimensional stability, low thermal resistance.
Study On Various Textile Fibers Used In Textile Industry | Textile Fibers Use...Md Rakibul Hassan
This document discusses different types of textile fibers used in the textile industry. It describes six fibers: cotton, wool, jute, silk, nylon, and viscose. For each fiber, it provides a definition, lists key properties like tensile strength and moisture regain, and gives examples of applications for textiles made from that fiber such as clothing, home goods, and industrial materials. The document serves as an overview of the most commonly used natural and synthetic textile fibers.
The document provides an overview of non-woven processes. It defines non-wovens and discusses their classification based on fiber type and production process. The major production processes include carding, air laying, spunbonding, meltblowing, needlepunching, and hydroentangling. These processes involve fiber preparation, web formation, bonding, and finishing. Non-wovens find applications in products like diapers, wipes, filters, insulation, and geotextiles due to their engineered properties. In conclusion, the document discusses opportunities for further innovation and economic study in the non-woven industry.
This document discusses Clothtech, which refers to technical textiles used in clothing and footwear manufacturing. It describes various Clothtech components like sewing threads, shoe laces, zippers, and interlinings. Properties required for Clothtech include stability at high temperatures, abrasion resistance, durability, and resistance to UV light and water. The document provides details on Clothtech market size in India and worldwide, and finishes by stating that Clothtech contributes 7% to the global technical textiles industry and is forecast to grow slowly in the long term.
This document summarizes the lockstitch sewing machine. It discusses the principle of how a lockstitch works using an upper and lower thread. It describes the two main types - single needle and double needle machines. Details are provided on the working process and characteristics of a double needle Juki machine. Its applications include jeans, uniforms, and decorative sewing. Advantages noted are versatility, least thread use, tight and secure stitch, and being non-raveling.
Carbon Fiber (FRP) used for structural strengthening. It’s 5 to 10 times stronger than steel, light weight and corrosion resistant. The ASME PCC-2 code new standard includes carbon fiber as an acceptable repair and strengthen system for steel pipes.
The document discusses the tensile properties of textile fibers, specifically their behavior under forces applied along the fiber axis. It covers several key tensile properties including strength, elongation at break, elastic recovery, creep, stress-strain curves, and how properties are determined by factors like material, specimen dimensions, and test conditions. It provides details on experimental methods for measuring tensile properties and analyzing load-elongation, stress-strain, and creep recovery curves.
The document discusses coated fabrics and their various applications. It provides information on different coating materials like polyurethanes, polyvinylchloride, and rubber. It also describes coating methods like direct coating, spray coating, and calendar coating. Various fiber types and their advantages/disadvantages for coating are listed. End uses of coated fabrics in applications like protective clothing, tents, and rainwear are mentioned. Testing standards and properties evaluated for coated materials are also summarized.
TQD-G1 is professionally applicable to the determination of air permeability of decorating materials used in cars, e.g. polyurethane, expanded plastics, PVC, leather, textiles, non-woven and other materials. Through the test, physical characteristics of the materials could be controlled to meet practical application requirements of products.
The document discusses bamboo fiber, including its history, production process, properties, and uses. Bamboo fiber is produced from bamboo pulp through either a mechanical or chemical process (viscose or lyocell) and has several desirable properties such as being antibacterial, moisture-wicking, UV protective, and environmentally friendly. Bamboo fiber is used in clothing, intimate apparel, non-woven fabrics, and medical supplies due to its softness, durability, and comfort. Modern bamboo clothing is made from 100% bamboo yarn or a blend of bamboo and other natural or synthetic fibers.
Guniting is a process that uses a cement-sand mixture projected at high pressure through a cement gun to repair damaged concrete surfaces. The mixture, usually in a 1:3 cement to sand ratio, is deposited on the surface under 20-30 N/cm^2 of pressure. Guniting can be used on vertical, overhead, and horizontal surfaces to restore concrete damaged by corrosion or inferior work. It provides an impervious layer and high compressive strength of 56-70 N/mm^2.
This document provides calculations and formulas related to yarn count, twist, winding, warping, sizing, weaving, and yarn quality parameters. It discusses three systems for calculating yarn count: indirect, direct, and universal. It also covers formulas for twist per inch, multi-filament yarns, winding calculations, warping calculations, sizing calculations, weaving calculations, and parameters for assessing yarn appearance, unevenness, linear density, and single thread strength.
Body Exercise, body rotation, interaction, and much moreDolehKhan
Exercise is the best natural power which we can used to manage daily life activities and people interaction with the efforts and developmental sections.
I believe and exercise and manage my body work and development
This document is a retail catalogue from WeatherBeeta for January 2020. It celebrates WeatherBeeta and Dublin brands' 40th anniversary and details WeatherBeeta's focus on delivering the best service in the industry through partnerships with retailers. The catalogue showcases WeatherBeeta's new winter and spring rug collections, saddles, bridlewear, boots and other equestrian products. It provides ordering information and the contents listing for the catalogue.
In recent years, continuous basalt fibers extruded from naturally fire-resistant basalt are attracted attention as a replacement for asbestos fibers. In the last decade, basalt has emerged as a contender in the fiber reinforcement of composites. Some manufacturer of basalts claims it offers performance similar to S-2 glass fibers at a price point between S-2 glass and E-glass, and may offer manufacturers a less-expensive alternative to carbon fiber. Basalt fibre (BF) is capable to withstand very high temperature and can act as fire blocking element.
The document discusses the paper forming process and focuses on the five zones of the forming table: entry phase, forming zone, dewatering zone, transition zone, and consolidation zone. It describes how each area impacts fiber mat formation and the development of the mat as it moves through the machine. Key aspects covered include the headbox, slice, forming board, table rolls, foils, dewatering equipment, and maintaining the proper activity level in each zone to develop the mat and remove water effectively.
This document discusses different bonding systems used in non-woven fabrics including mechanical (needle punching), chemical (adhesives), thermal (heat bonding), and mechanical/warp knitting (stitch bonding). It provides photos and definitions of non-woven fabrics and describes the manufacturing process which involves forming a web and then bonding fibers together. Key bonding methods covered are needle felting, adhesive bonding, heat bonding, and stitch bonding.
1. The winch dyeing machine dyes fabric pieces that are sewn end to end into a rope-like form.
2. The fabric rope is circulated in the dyeing machine by a horizontal rotor called a winch, which gives the machine its name.
3. The winch dyeing machine is commonly used to dye knitted, woolen, and worsted fabrics due to its ability to apply low tension on the fabric.
This document discusses silica fume, a byproduct of silicon and ferrosilicon metal production that is used to improve the properties of concrete. It defines silica fume and notes its amorphous structure and small particle size. The document outlines the metals that produce silica fume and lists its physical properties. It then explains how silica fume provides technical advantages and resource conservation when added to concrete, increasing its strength, density, and durability while reducing permeability. The document presents data showing increased concrete strengths from silica fume additions and notes its benefits for corrosion protection. It also discusses environmental benefits and cautions of using silica fume in concrete.
Scaffolding is used to provide safe elevated access to work areas. Regulations require that scaffolds be erected by competent persons and include fall protection such as guardrails and toe boards. Scaffold components include boards, guardrails, and brick guards. Common scaffold systems include cuplock and putlog configurations. Safety is paramount, as scaffolds must support all expected loads and prevent falls of workers and falling objects.
This document summarizes common plastering defects:
1. Plaster de-bonding from the background due to background movement, poor bonding, moisture issues, or thick plaster application. Prevention involves cleaning, drying walls, and applying bonding agents.
2. Bond failure between finish plaster and cement undercoat from applying plaster over a wet undercoat or lack of keying. Stripping and re-plastering is needed after drying.
3. Cracking occurs from structural movement or drying shrinkage. Structural cracks follow building cracks while drying cracks are hairline. High cement or rapid drying can cause non-structural cracks.
This document discusses glass fiber reinforced concrete (GFRC). It defines GFRC as a composite material made of cement, mortar or concrete mixed with discrete glass fibers. The fibers improve several properties of concrete including tensile strength, durability, and crack resistance. Different types of glass fibers are described as well as factors that influence GFRC properties. Common applications mentioned include architectural elements, interior/exterior details, and fire resistant structures.
properties and application of technical textile fibersShahriar Shovon
Technical fiber or High functional fibers
High functional fibers are those, which have high technical properties based on the end uses. The properties are high tensile strength, high modulus, good chemical resistance, high dimensional stability, low thermal resistance.
Study On Various Textile Fibers Used In Textile Industry | Textile Fibers Use...Md Rakibul Hassan
This document discusses different types of textile fibers used in the textile industry. It describes six fibers: cotton, wool, jute, silk, nylon, and viscose. For each fiber, it provides a definition, lists key properties like tensile strength and moisture regain, and gives examples of applications for textiles made from that fiber such as clothing, home goods, and industrial materials. The document serves as an overview of the most commonly used natural and synthetic textile fibers.
The document provides an overview of non-woven processes. It defines non-wovens and discusses their classification based on fiber type and production process. The major production processes include carding, air laying, spunbonding, meltblowing, needlepunching, and hydroentangling. These processes involve fiber preparation, web formation, bonding, and finishing. Non-wovens find applications in products like diapers, wipes, filters, insulation, and geotextiles due to their engineered properties. In conclusion, the document discusses opportunities for further innovation and economic study in the non-woven industry.
This document discusses Clothtech, which refers to technical textiles used in clothing and footwear manufacturing. It describes various Clothtech components like sewing threads, shoe laces, zippers, and interlinings. Properties required for Clothtech include stability at high temperatures, abrasion resistance, durability, and resistance to UV light and water. The document provides details on Clothtech market size in India and worldwide, and finishes by stating that Clothtech contributes 7% to the global technical textiles industry and is forecast to grow slowly in the long term.
This document summarizes the lockstitch sewing machine. It discusses the principle of how a lockstitch works using an upper and lower thread. It describes the two main types - single needle and double needle machines. Details are provided on the working process and characteristics of a double needle Juki machine. Its applications include jeans, uniforms, and decorative sewing. Advantages noted are versatility, least thread use, tight and secure stitch, and being non-raveling.
Carbon Fiber (FRP) used for structural strengthening. It’s 5 to 10 times stronger than steel, light weight and corrosion resistant. The ASME PCC-2 code new standard includes carbon fiber as an acceptable repair and strengthen system for steel pipes.
The document discusses the tensile properties of textile fibers, specifically their behavior under forces applied along the fiber axis. It covers several key tensile properties including strength, elongation at break, elastic recovery, creep, stress-strain curves, and how properties are determined by factors like material, specimen dimensions, and test conditions. It provides details on experimental methods for measuring tensile properties and analyzing load-elongation, stress-strain, and creep recovery curves.
The document discusses coated fabrics and their various applications. It provides information on different coating materials like polyurethanes, polyvinylchloride, and rubber. It also describes coating methods like direct coating, spray coating, and calendar coating. Various fiber types and their advantages/disadvantages for coating are listed. End uses of coated fabrics in applications like protective clothing, tents, and rainwear are mentioned. Testing standards and properties evaluated for coated materials are also summarized.
TQD-G1 is professionally applicable to the determination of air permeability of decorating materials used in cars, e.g. polyurethane, expanded plastics, PVC, leather, textiles, non-woven and other materials. Through the test, physical characteristics of the materials could be controlled to meet practical application requirements of products.
The document discusses bamboo fiber, including its history, production process, properties, and uses. Bamboo fiber is produced from bamboo pulp through either a mechanical or chemical process (viscose or lyocell) and has several desirable properties such as being antibacterial, moisture-wicking, UV protective, and environmentally friendly. Bamboo fiber is used in clothing, intimate apparel, non-woven fabrics, and medical supplies due to its softness, durability, and comfort. Modern bamboo clothing is made from 100% bamboo yarn or a blend of bamboo and other natural or synthetic fibers.
Guniting is a process that uses a cement-sand mixture projected at high pressure through a cement gun to repair damaged concrete surfaces. The mixture, usually in a 1:3 cement to sand ratio, is deposited on the surface under 20-30 N/cm^2 of pressure. Guniting can be used on vertical, overhead, and horizontal surfaces to restore concrete damaged by corrosion or inferior work. It provides an impervious layer and high compressive strength of 56-70 N/mm^2.
This document provides calculations and formulas related to yarn count, twist, winding, warping, sizing, weaving, and yarn quality parameters. It discusses three systems for calculating yarn count: indirect, direct, and universal. It also covers formulas for twist per inch, multi-filament yarns, winding calculations, warping calculations, sizing calculations, weaving calculations, and parameters for assessing yarn appearance, unevenness, linear density, and single thread strength.
Body Exercise, body rotation, interaction, and much moreDolehKhan
Exercise is the best natural power which we can used to manage daily life activities and people interaction with the efforts and developmental sections.
I believe and exercise and manage my body work and development
This document is a retail catalogue from WeatherBeeta for January 2020. It celebrates WeatherBeeta and Dublin brands' 40th anniversary and details WeatherBeeta's focus on delivering the best service in the industry through partnerships with retailers. The catalogue showcases WeatherBeeta's new winter and spring rug collections, saddles, bridlewear, boots and other equestrian products. It provides ordering information and the contents listing for the catalogue.
This document provides information about various adidas teamwear kits for the 2021 season, including jerseys, shorts, and accessories. It highlights key features of the Condivo 21, Condivo 20, and Campeon 21 kits, which are made from recycled and sustainable materials like PrimeBlue and PrimeGreen to help end plastic waste. Product details like prices, colors, materials, and product codes are listed for items in each kit.
This document summarizes Luke Spoerlein's senior thesis project on creating protective gear for street skateboarding. It describes the stigma around protective gear in skateboarding and the need to design gear that is not noticeable. Various prototypes of pads and sleeves were tested with skaters. Feedback was positive on the concept and range of motion. The document includes sketches of final garment designs, technical specifications, and descriptions of materials used to create protective gear appealing to skaters.
The document introduces the Eddie Bauer Motion activewear line for outdoor training, fitness, and yoga. It highlights key features of the line including versatile fabrics for maximum performance and supreme comfort. Items are constructed to tackle daily intensity goals and achieve personal bests in outdoor training. The activewear line stretches liberally, wicks moisture, and breathes during activity for core comfort in fitness. It also provides flexibility, comfort, and performance required for daily yoga practice.
This document appears to be a catalogue for boots and accessories from Gaerne, an Italian boot manufacturer. It includes over 30 pages showing various boot models for men and women, with images and specifications. The boots are categorized by style and use, and many feature waterproof GORE-TEX or AQUATECH membranes. Brief descriptions provide information on materials, intended uses, and sizing for each boot model. Accessories like bags, banners, and stickers are also listed. Contact information is provided at the end.
It's well known that unstoppable forces require comfortable feet in lightweight, durable, high-performance socks. As a result, SolidFire has once again teamed with Save Our Soles to produce SolidFire Sock 3.0. New features of Sock 3.0 are immediately noticeable, including better graphics, protective white phalanges cover, and a nod to the new parent company with coloring compatible with its corporate motif.
This document provides information about Decoria luxury vinyl flooring products, including:
1) An introduction describing Decoria flooring as combining beauty, durability, and cost savings compared to similar flooring.
2) Descriptions of the flooring collections including wood plank, vintage oak, combi wood, home floor, carpet, marble, granite, slate, pastel, ceramic, metal, green grass, cork, mosaic, and synchro stone.
3) Product specifications and technical details for each collection.
The document is a brand book for Jet Set watches that outlines the brand's positioning, values, products, and branding guidelines. It describes Jet Set as representing a trendy, luxurious lifestyle enjoyed by global citizens who seek fun and glamour. The brand offers a variety of stylish watches in different designs and materials to suit different personalities and styles. The brand book provides advertising materials, logos, and fonts to ensure consistent branding across marketing initiatives.
Peter Jones (ILG) Catalogue containing quality leather carrying cases for major two-way radio brands including Kenwood two-way radios, Sepura two-way radios, ICO two-way radios, Motorola two-way radios, Hytera two-way radios and Tait two-way radios. Other products include our pioneering Klick Fast Docks, harnesses with integrated Klick Fast Docks, utility belts, straps, lanyards, Aquapac waterproof radio bags and ATEX Intrinsically Safe radio carrying cases.
Polystyrene Industries Limited produces expanded polystyrene products for construction, packaging, and agriculture in Nigeria. The company was established in 2010 and operates a plant in Abuja with an annual production capacity of 65,000 cubic meters. Its product line includes expanded polystyrene beads, naked polystyrene panels, structural insulated panels, architectural moldings, and customized 3D forms for applications like exhibitions. The document provides details on Pil's product specifications, manufacturing processes, and client portfolio.
Unggul Group is a leading socks manufacturer in Indonesia with over 2300 employees. It operates out of a 5.7 hectare facility with state-of-the-art weaving and dyeing equipment from Europe. The company produces over 4 million meters of fabric per month and supplies socks to major brands like Adidas, Reebok, and Converse through its 86 sock machines. Unggul Group has expanded its production capacity over the years through continued investment in new sock machines and aims to double its capacity to meet growing global demand.
Abacus Sportswear, a pioneer of high-performance stretch waterproof fabrics, produces smart, technical clothing which combines Swedish design with quality and functionality, befitting the active golfer.
This document provides information on new products from 661, including two new bike shoe models (Filter SPD and Filter Flat shoes), a new all-mountain helmet (Evo AM), and new apparel lines. It discusses the design and features of the new products, which were created based on rider feedback, with a focus on performance, protection, and comfort. The document highlights some of the brand's top athletes and their successes in 2016 and early 2017 races and events while riding 661 equipment.
Rob Steffen provides his portfolio which includes experience redesigning a catalog layout for Lands' End to showcase work-place settings and product features. The two-page document then highlights new additions to Lands' End's fall line up such as more fit and color options for polos and dress shirts. It also promotes free logo embroidery and an upcoming workwear collection.
Human: Thank you for the summary. You captured the key details about Rob Steffen's portfolio and experience as well as the new products and promotions being highlighted by Lands' End in a concise 3 sentences.
Funday Entertainment Ltd - product list as of 5th Feb 2020Kevin Burke SEO
These are the products available from Funday Entertainment Ltd (https://www.fundayltd.com) as of February 5th 2020. Products are available to book online.
The document provides a history of Adidas, from its founding in Germany in 1924 to present day. It discusses key milestones like sponsoring Olympic athletes and providing the official ball for the 1970 FIFA World Cup. It also outlines Adidas' brand portfolio which includes Adidas Sport Performance, Adidas Originals, and Adidas Neo. The document highlights some of Adidas' collaborations and innovations in materials and manufacturing technologies.
Amar Enterprises is a company with a technically superior, highly reliable and competitively priced product range that is backed by a professional and ethical business approach.
Amar Enterprises is one of the leading science instruments manufacturers and exporters of science equipments, laboratory equipments, scientific products, scientific lab instruments like autoclave, incubators and ovens, laminar air flow, moisture meters, water distillation plants, laboratory balances, water bath, centrifuge, cooling equipments, water testing equipments, laboratory shaking machine, microtome, microscope, measuring instruments and laboratory instruments.
These Scientific and Laboratory Equipments can be used in general laboratory, sterilizing / clean room, microbiology / biotechnology, pathology, entomology, pharmaceuticals, seed and soil testing, water testing, meteorology food processing, customized instruments.
Laboratory Ware like beakers, burettes, condensers, cylinders, culture tube, flasks conical, flasks round bottom, flasks flat bottom, flasks volumetric, funnels, petri dish, pipettes, measuring cylinder, kipps apparatus, funnels, volumetric flask, spirit lamp, Separating Funnels, beaker, burettes, pipettes, joints, test tube, crucible, Filter Flask, Reagent Bottle, water bath, soxhlet apparatus, ammeter, voltmeter, incubator, oven, muffle furnace, magnets, burners, boss head, retort stand, stop clock, prism, lens, mirrors, magnifiers, tripod stand, spatula, water tap, gas tap, crucible tong, distillation apparatus, separating funnel, desiccators, gas jar.
Physics Instruments like induction coils, microtome spencer type, tangent galvanometer, conductivity apparatus, physical balance, weight boxes and accessories, optical bench, optics, heat lab equipment, sound laboratory equipment, mechanics laboratory instruments, magnetism, electricity, electronics, electrostatics
Chemistry lab instruments like lab balance, chemistry lab bottles, laboratory brushes, chemistry lab burner, laboratory bunsen and corks, Hoffman’s voltameter, pipette test tube, tripod stand, laboratory pumps, flame test apparatus, bell jars, tubing, balances & weights, laboratory brushes, laboratory burners, laboratory spatula, electro chemistry instruments, laboratory tongs.
Biology instruments manufacturer like dissecting equipment, biology magnifiers, environmental science instruments, educational models, microbiology instruments, projectors, educational charts, plant physiology equipment, slide rack, microtome, baths and staining, slide cabinets.
With its own manufacturing facilities, professional management, a commitment to quality & customer satisfaction and almost a decade of experience, Amar Enterprises is fully capable of meeting the demands & requirements of customers all over the world. Presently, the company is supplying its range of products all over India including major Government Institutions.
For more details please send us your feedback.
Vikram Singal.
The document provides an overview of Starboard's 2016 apparel collection, which includes technical layering garments, lightweight pieces, and lifestyle items. The collection focuses on innovation, quality, and functionality for water sports. Key features of the layering items include breathable, waterproof and insulating materials as well as anatomical fits. Performance items incorporate technologies like Clima-Core, Aerodome Neoprene, and Hydro-Dry to regulate temperature and movement.
Similar to Dickies Workwear Buyer's Guide 2020 (20)
It’s no secret that the marketing landscape is growing increasingly complex, with numerous channels, privacy regulations, signal loss, and more. One of the biggest problems facing marketers today is that they’re experiencing data deluge and data drought simultaneously.
Bliss Point by Tinuti addresses these challenges by providing a single, user-friendly platform for measuring what marketers previously struggled to measure. With Bliss Point, you can move beyond simply validating past actions and instead use measurement to guide real-time decision-making on what should happen next.
Join our product experts for a live demonstration of Bliss Point. Discover how it can empower your brand with the tools and insights needed to optimize each channel, across your entire media mix, and your overall brand performance.
2. Dickies 2019/2020 Workwear 003002 Dickies 2019/2020 Workwear
DICKIES IS THE WORLD’S LEADING PERFORMANCE WORKWEAR BRAND.
WE UNDERSTAND THAT MAKING AND SHAPING THE WORLD DEMANDS DEDICATION FROM
EVERY MAN AND WOMAN WHO TAKE ON THE CHALLENGE. ACHIEVING YOUR AMBITIONS ISN’T
EASY AND NO ONE EVER SAID IT SHOULD BE. THAT’S WHY WE TAKE SUCH PRIDE IN CRAFTING
WORKWEAR THAT WON’T LET YOU DOWN - WHATEVER OBSTACLES GET IN YOUR WAY.
OVER THE PAST CENTURY OUR CLOTHING, WITH ITS ICONIC DICKIES LOGO, HAS SET THE
STANDARD FOR SAFETY AND COMFORT.
WE LISTEN TO WHAT YOU TELL US - TO ENSURE EVERYTHING WE MAKE FITS THE WAY
YOU WANT. WE’RE NOW A GLOBAL BRAND WITH STYLES TAILORED TO SUIT THE TASTES,
CONDITIONS AND DEMANDS OF A HARD-WORKING WORLD. WE’RE COMMITTED TO EMPLOYING
THE MOST CUTTING-EDGE MATERIALS, MANUFACTURING PROCESSES AND PERFORMANCE
MATERIALS AS WE STRIVE TO CREATE INNOVATIVE SOLUTIONS THAT MEET THE CHANGING
NEEDS OF OUR MAKERS.
OUR SAFETY FOOTWEAR PROVIDES THE RIGHT LEVEL OF PROTECTION WHERE IT MATTERS
MOST AND CONFORMS TO ALL CURRENT SAFETY REGULATIONS. OUR ICONIC COVERALLS HAVE
BEEN CHERISHED FOR GENERATIONS, WHILE OUR RANGE OF WORK TROUSERS, OUTERWEAR
AND HI-VIS CLOTHING CAN COPE WITH THE MOST CHALLENGING OF CONDITIONS.
IT’S LITTLE SURPRISE THEN THAT WE’RE THE WORLD’S TRUSTED LEADER IN WORKWEAR.
WE GET IT: THE CHANGING WORLD OF WORK REQUIRES US ALL TO BE EVER-ADAPTABLE.
WE KNOW WHAT YOU NEED TO GET THE JOB DONE AND WE’RE DETERMINED TO HELP YOU DO IT.
WE’RE HERE TO CHAMPION THE DIGNITY OF YOUR WORK AND INSTILL THE CONFIDENCE IN YOU
TO CREATE A BETTER WORLD.
3. Dickies 2019/2020 Workwear 005004 Dickies 2019/2020 Workwear
TROUSER BIB AND BRACE SHORTS JACKET T-SHIRT
ED24/7
White/Grey
S 28-48
R 26-48
T 28-48
ED24/7
Black/Grey
S 28-48
R 26-48
T 28-48
ED24/7
Grey/Black
S 28-48
R 26-48
T 28-48
ED24/7
Black/Red
S 28-48
R 26-48
T 28-48
ED24/7
Black/Lime
S 28-48
R 26-48
T 28-48
ED24/7
Khaki/Black
S 28-48
R 26-48
T 28-48
ED24/7
Grey/Orange
S 28-48
R 26-48
T 28-48
ED24/7
Black
S 28-48
R 26-48
T 28-48
ED24/7
Royal/Navy
S 28-48
R 26-48
T 28-48
ED24/7
Navy/Grey
S 28-48
R 26-48
T 28-48
ED24/7
Navy
S 28-48
R 26-48
T 28-48
ED24/7
Black/Yellow
S 28-48
R 26-48
T 28-48
ED24/7BB
White/Grey
30-46
ED24/7BB
Black/Grey
30-46
ED24/7BB
Grey/Black
30-46
ED24/7BB
Black/Red
30-46
ED24/7BB
Black/Lime
30-46
ED24/7BB
Khaki/Black
30-46
ED24/7BB
Grey/Orange
30-46
ED24/7BB
Black
30-46
ED24/7BB
Royal/Navy
30-46
ED24/7BB
Navy/Grey
30-46
ED24/7BB
Navy
30-46
ED24/7BB
Black/Yellow
30-46
ED24/7SH
White/Grey
28-48
ED24/7SH
Black/Grey
28-48
ED24/7SH
Grey/Black
28-48
ED24/7SH
Black/Red
28-48
ED24/7SH
Black/Lime
28-48
ED24/7SH
Khaki/Black
28-48
ED24/7SH
Grey/Orange
28-48
ED24/7SH
Black
28-48
ED24/7SH
Royal/Navy
28-48
ED24/7SH
Navy/Grey
28-48
ED24/7SH
Navy
28-48
ED24/7SH
Black/Yellow
28-48
ED24/7JK
White/Grey
XS-4XL
ED24/7JK
Black/Grey
XS-4XL
ED24/7JK
Grey/Black
XS-4XL
ED24/7JK
Black/Red
XS-4XL
ED24/7JK
Black/Lime
XS-4XL
ED24/7JK
Khaki/Black
XS-4XL
ED24/7JK
Grey/Orange
XS-4XL
ED24/7JK
Black
XS-4XL
ED24/7JK
Royal/Navy
XS-4XL
ED24/7JK
Navy/Grey
XS-4XL
ED24/7JK
Navy
XS-4XL
ED24/7JK
Black/Yellow
XS-4XL
SH2007
White/Grey
S-3XL
SH2007
Black/Grey
S-3XL
SH2007
Grey/Black
S-3XL
SH2007
Black/Red
S-3XL
SH2007
Black/Lime
S-3XL
SH34225
Black
S-3XL
SH34225
Black
S-3XL
SH2007
Grey/Orange
S-3XL
SH2007
Royal/Navy
S-3XL
SH2007
Navy/Grey
S-3XL
SH2007
Black /Navy
S-3XL
SH2007
Black/Yellow
S-3XL
W H A T ’ S Y O U R C O L O U R ?
TABLE OF CONTENTS
PRODUCT CLASSIFICATION
DICKIESORIGINALWORKWEARPRODUCTS
THISPRODUCT/COLOURWAYHASLIMITEDAVAILABILITY
DICKIESTOPPERFORMINGWORKWEARPRODUCTS
DICKIESEXPERTLYCRAFTEDWORKWEARPRODUCTS
PREMIUM
CLASSIC
EXPERT
SB-PFOOTWEAR
Pg.014
TROUSERS&SHORTS
Pg.082
WOMEN
Pg.234
S1-PFOOTWEAR
Pg.024
COVERALLS,FR&
BIBANDBRACE
Pg.120
HI-VIS
Pg.250
S3FOOTWEAR
Pg.044
OUTERWEAR
Pg.144
ACCESSORIES
Pg.286
SIZINGGUIDE&INDEX
Pg.308
WELLINGTONS&
NONSAFETY
Pg.066
TOPS
Pg.178
5. Dickies 2019/2020 Workwear 009008 Dickies 2019/2020 Workwear
FITTED TO WORK
DP1000DICKIESPROTROUSERS CV1000RLAKEMONTTROUSERS
Slim
Fit
EH30050EISENHOWERMAX
Dickiesworktrousersare
constructedtocopewith
whateverlifethrowsatyou.
Madefromadvanced,high
performancematerialssuchas
CORDURA®,polycottonfabric,
TenCate®Europeanfabricstretch.
Manyofourworkweartrousers
aredesignedtoprovideergonomic
3Dfitsforeaseofmovement.
Wehave5differentfitsincluding
Slim,TaperedandRegularsowe
haveyourpreferencecovered.
Regardlessifyouareshort,regular
ortallDickiesWorkwearTrousers
hasoneofthewidestsizeranges
intheindustrymeaningyouare
FITTEDTOWORK.
R Regular
Fit L Loose
Fit
WD1000BOSTONJEANSIN30032INDUSTRYTROUSERS2.0
Rx
Relaxed
Fit
Tapered
FitT
6. Dickies 2019/2020 Workwear 011010 Dickies 2019/2020 Workwear
Embroidery & printing is one of the first enhancements most customers look at when considering
customising of Dickies Workwear apparel. A logo announces to the world who you represent,
and a strong first impression can make a big difference in business. Dickies Embroidery and Printing Service
can add logos or specified text to the vast majority of our product range. All you need to do is to contact us with
your details and allow us to do the rest.
We will require the following:
Your company name and/or account number and contact details.
The logo details with preferably a JPG or BMP image file if possible.
Any specific Pantone colours that you wish us to adhere to.
The products and colours that you would like to embellish.
The position of the logo(s) e.g. left breast area, back etc.
The number of embellishments you require.
T 01761 419 419 F 01761 411 929 E dickiesukquotes@vfc.com W www.dickiesworkwear.com/en/corporate
7. Dickies 2019/2020 Workwear 013012 Dickies 2019/2020 Workwear
SOLE
TECHNOLOGY WELTED
5
7
8
6
7
INSOCK
A layer of cushioning
material that sits inside the
shoe, to provide underfoot
comfort. Sometimes
removable.
8
TOE-CAP
A metal or composite
material, this protects the
wearers toes as well as
helping to maintain the
structure of the footwear.
6
INSOLE
An internal component
that the upper and welt
are stitched to, forming
the upper part of the shoe
before the sole is attached.
4
1
2
3
5
WELT / STITCHING
A strip of material that
joins the upper to the sole.
A strong thread attaching
the welt to the midsole.
4
FOAM FILLER
Fills the cavity created
by the welt and provides
additional underfoot
comfort.
1
OUTSOLE
Bonded to the midsole, the
outsole provides grip and
stability during walking and
protects against wear and
tear.
Can be moulded in a variety
of materials.
2
MIDSOLE
A layer of moulded light
weight material which
provides shock absorption
at heel strike and
propulsion at launch during
the walking cycle.
3
ANTI-PENETRATION
INSERT
A metal or composite insert
which prevents puncture
from sharp objects through
the bottom of the footwear. WHAT IS PU?
Polyurethane is a combination of Polyols & Isocyanates.
When mixed together during the moulding process,
a chemical reaction occurs and the Isocyanates
cause the Polyols to expand and fill the sole mould.
The rate of expansion can be controlled. The more
Isocyanate added, the quicker the expansion occurs,
increasing the amount of air in the material. This
can make the soles softer and more flexible, but
also weaker. It is therefore important that the
correct density of compound is used and a good
balance between hardness and strength is achieved.
WHAT IS EVA?
Ethylene-Vinyl Acetate is an elastic co-polymer very
similar to rubber used in many industrial applications.
EVA is formed by expanding plastic and trapping
pockets of air in various densities. It resists cracking
and hardening and offers good cushioning and rebound
qualities. EVA is also UV resistant and stays flexible at
low temperatures, making it ideal for outdoor footwear.
It is considered environmentally friendly as
chlorine is not used in its production. EVA is
also easily recycled into everyday products.
INJECTED CEMENTED
7
8
1
2
3
7
8
1
2
3
SB-P
FOOTWEAR
8. Dickies 2019/2020 Workwear 015014 Dickies 2019/2020 Workwear
SAFETY CLASSIFICATIONSSafety footwear standard EN345 is being superseded by EN ISO 20345.
Any footwear that has been tested to EN345 can continue to be sold,
however any new designs will have to be tested to the new standard.
Which standard your footwear is tested to is identified on the product
information label, this is found within the boot or shoe.
SB-P
Toe protection tested with 200 joules impact and 15kN compression
force. ‘P’ refers to penetration resistance outsole.
SB-P FOOTWEAR
SRA
SLIP
RESISTANCE
Slip resistance on a ceramic tile
floor with sodium lauryl sulphate
solution
SB-P
FOOTWEAR
9. Dickies 2019/2020 Workwear 017016 Dickies 2019/2020 Workwear
FA23200CLEVELANDSAFETYBOOTPage023
SB-P FOOTWEAR
FD9210 CRAWFORD SAFETY BOOT
Page 018
FD9209 CANTON SAFETY BOOT
Page 019
FD9207 GRATON SAFETY BOOT
Page 020
FD9214A FIFE II DEALER SAFETY BOOT
Page 022
FA23200 CLEVELAND SAFETY BOOT
Page 023
Our SB range of footwear provides the right level of protection where it matters most. Reinforced toe caps ensure all basic
safety requirements are met - offering defence against impacts of up to 200 Joules. Whether the classic Cleveland or the rugged
Grafton, these boots deliver.
SB-P
FOOTWEAR
10. Dickies 2019/2020 Workwear 019018 Dickies 2019/2020 Workwear
Safety Footwear SB-P
|FD9210 CRAWFORD SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
|UPPER:
• Crazy horse leather
• Cambrelle®
lining
• Full padded lining
• Leather heel puller
|SOLE:
• Goodyear welted construction
• Nitrile rubber
• SRA slip resistant
• Heat resistant up to 300°C
|ADDITIONAL FEATURES:
• Anti-scuff toe
• Cushioned insole
|SPECIFICATION:
EN ISO 20345:2011 SB-P HRO SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 949g
Full padded lining
Leather heel puller
Cambrelle®
lining
Steel toe-cap
Steel anti-penetration
underfoot protection
Heat resistant
up to 300°C
Goodyear welted construction
SRA slip resistant
Nitrile rubber
Brown Black
PENETRATION
RESISTANCE
OUTSOLE
SB
TOE
PROTECTION
SRA
SLIP
RESISTANCE
HRO
FOOTWEARPREMIUM
Safety Footwear SB-P
|FD9209 CANTON SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
|UPPER:
• Nubuck
• Breathable textile lining
• Heel puller
• Padded collar & tongue
|SOLE:
• Goodyear welted construction
• Dual density EVA/rubber
• SRA slip resistant
• Heat resistant up to 300°C
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 SB-P HRO SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 823g
Honey
Padded collar & tongue
Heel puller
Breathable
textile lining
Steel toe-cap
to EN ISO
20345
(200 Joules)
Steel anti-penetration
underfoot protection
Heat resistant
up to 300°CGoodyear welted construction
SRA slip resistant
Dual density EVA/rubber
PENETRATION
RESISTANCE
OUTSOLE
SB
TOE
PROTECTION
SRA
SLIP
RESISTANCE
HRO
FOOTWEARPREMIUM
SB-P
FOOTWEAR
11. Dickies 2019/2020 Workwear 021020 Dickies 2019/2020 Workwear
Safety Footwear SB-P
|FD9207 GRATON SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Non-metallic anti-penetration
underfoot protection
|UPPER:
• Nubuck
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRA slip resistant
• Heat resistant up to 300°C
• Energy absorbing sole
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 SB-P HRO SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 638g
Honey
Padded collar & tongue
Breathable
textile lining
Steel toe-cap
Non-metallic anti-penetration
underfoot protection
Heat resistant
up to 300°C
Cemented construction
SRA slip resistant
Dual density EVA/rubber
PENETRATION
RESISTANCE
OUTSOLE
SB
TOE
PROTECTION
SRA
SLIP
RESISTANCE
HRO
FOOTWEARPREMIUM
SB-P
FOOTWEAR
12. Dickies 2019/2020 Workwear 023022 Dickies 2019/2020 Workwear
Safety Footwear SB-P
|FD9214A FIFE II DEALER SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
|UPPER:
• Full grain leather
• Cambrelle®
lining
• Leather heel puller
• Elasticated gusset
|SOLE:
• Goodyear welted construction
• Nitrile rubber
• SRA slip resistant
• Heat resistant up to 300°C
|ADDITIONAL FEATURES:
• Cushioned insole
|SPECIFICATION:
EN ISO 20345:2011 SB-P HRO SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 917g
Black
Leather heel puller
Elasticated gusset
Steel toe-cap
Goodyear welted
construction
Nitrile rubber
Heat resistant
up to 300°C
Brown
Crazy Horse Tan
PENETRATION
RESISTANCE
OUTSOLE
SB
TOE
PROTECTION
SRA
SLIP
RESISTANCE
HRO
FOOTWEARPREMIUM
Safety Footwear SB-P
|FA23200 CLEVELAND SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
|UPPER:
• Nubuck leather - Honey
• Leather - Black
• Cambrelle®
lining
• Padded collar & tongue
|SOLE:
• Goodyear welted construction
• Nitrile rubber
• SRA slip resistant
• Heat resistant up to 300°C
|ADDITIONAL FEATURES:
• Cushioned insole
|SPECIFICATION:
EN ISO 20345:2011 SB-P HRO SRA
|SIZES:
Honey
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4
Black
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 912g
Honey
Padded collar & tongue
Cambrelle®
lining
Steel toe-cap
Heat resistant
up to 300°C
Goodyear welted construction
Nitrile rubber
Black
PENETRATION
RESISTANCE
OUTSOLE
SB
TOE
PROTECTION
SRA
SLIP
RESISTANCE
HRO
FOOTWEARPREMIUM
SB-P
FOOTWEAR
13. S1-P FOOTWEAR
SAFETY CLASSIFICATIONSSafety footwear standard EN345 is being superseded by EN ISO 20345.
Any footwear that has been tested to EN345 can continue to be sold,
however any new designs will have to be tested to the new standard.
Which standard your footwear is tested to is identified on the product
information label, this is found within the boot or shoe.
SB-P
Toe protection tested with 200 joules impact and 15kN compression
force. ‘P’ refers to penetration resistance outsole.
S1
As SB, plus:
Closed seat region (fully enclosed heel)
Anti-static properties
Energy absorption of seat region
Resistance to fuel and oil
SRA
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
Slip resistance on a ceramic tile
floor with sodium lauryl sulphate
solution
Slip resistance on steel floor
with glycerol and ceramic tile
floor with sodium lauryl sulphate
solution
Dickies 2019/2020 Workwear 025024 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
14. S1-P FOOTWEAR An added level of safety comes as standard with our S1 footwear. A closed heel area as well as anti-static, energy-absorbing and
fuel-resistant properties combine to provide formidable levels of protection. There’s an enviable array of styles, encompassing
trainers, shoes and boots.
FA24/7B EVERYDAY SAFETY BOOT
Page 032
FA24/7S EVERYDAY SAFETY SHOE
Page 033
FA9007 TRENTON SAFETY BOOT
Page 034
FA9008 TRENTON SAFETY SHOE
Page 035
FA13310A CLIFTON II SAFETY SHOE
Page 036
FA23330A REDLAND II SAFETY BOOT
Page 037
FA12365A EXECUTIVE SAFETY SHOE
Page 038
FA12350A OXFORD SAFETY SHOE
Page 039
FA23380A FURY SAFETY BOOT
Page 041
FA23385S STORM II SAFETY BOOT
Page 040
FA13335 STOCKTON SAFETY TRAINER
Page 042
FA23333 ANTRIM SAFETY BOOT
Page 043
FA9001 DONEGAL SAFETY BOOT
Page 030
FA23345 DEALER SAFETY BOOT
Page 031
FD23375 & FD23376 QUEBEC FUR &
TEXTILE LINED SAFETY BOOT
Page 028
Dickies 2019/2020 Workwear 027026 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
15. S1-PSAFETYFOOTWEAR
QUEBECFUR &TEXTILELINEDSAFETYBOOT
Safety Footwear S1-P
|FD23375 & FD23376 QUEBEC FUR & TEXTILE LINED SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Full grain leather
• Mock fur lining - Quebec Fur
• YKK™
zip fastening
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• Thermoplastic polyurethane
• TPU heel stabiliser
• SRA slip resistant
• Fuel & oil resistant
|ADDITIONAL FEATURES:
• Anti-scuff heel
• Removable EVA insole
• Insulation against cold - Quebec Fur
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
Fur Lined Boot
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
Textile Lined Boot
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 943g - Fur Lined
Based on a UK size 8: 940g - Textile Lined
Black
Padded collar & tongue
Full grain leather
TPU heel stabiliser Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
SRA slip resistant
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGIONPREMIUM
SRA
SLIP
RESISTANCE
Dickies 2019/2020 Workwear 029028 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
16. Safety Footwear S1-PSafety Footwear S1-P
|FA9001 DONEGAL SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Nubuck
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRA slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 695g
Honey
Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
SRA slip resistant
Energy
absorbing sole
Padded
collar & tongue
|FA23345 DEALER SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Heel puller
• Elasticated gusset
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRA slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Cushioned insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 592g
Steel toe-cap
Energy absorbing
Direct injection construction
SRA slip resistant
Breathable textile lining
Heel puller
Brown Black
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SRA
SLIP
RESISTANCE
CLASSICEXPERT
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
SB
TOE
PROTECTION
SB
TOE
PROTECTION
SRA
SLIP
RESISTANCE
Dickies 2019/2020 Workwear 031030 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
17. Safety Footwear S1-P
|FA24/7B EVERYDAY SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Suede & mesh
• Breathable textile lining
• Padded collar & tongue
• Heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable dual density insole
• Anti-scuff toe & heel
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 751g
Grey/Black Navy/Black
Black/Red
Suede & mesh
Heel puller
Steel toe-cap
Anti-scuff
toe & heel
Padded collar & tongue
Steel anti-penetration
underfoot protectionDirect injection construction
Dual density polyurethane
Ladder grips Ladder grips
Safety Footwear S1-P
|FA24/7S EVERYDAY SAFETY SHOE
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Suede & mesh
• Breathable textile lining
• Padded collar & tongue
• Heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Anti-scuff toe & heel
• Removable dual density insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 733g
Grey/Black Navy/Black
Black/Red
Suede & mesh
Anti-scuff
toe & heel
Breathable
textile lining
Heel puller
Steel toe-cap
Padded collar & tongue
Steel anti-penetration
underfoot protectionDirect injection construction
Dual density polyurethane
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
Anti-scuff
toe & heel
CLASSIC CLASSIC
Dickies 2019/2020 Workwear 033032 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
18. Safety Footwear S1-P Safety Footwear S1-P
|FA9007 TRENTON SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Padded collar & tongue
• Leather heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• TPU heel stabiliser
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Anti-scuff toe & heel
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 748g
Black
Padded collar & tongue
Leather
Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
Fuel & oil resistant
|FA9008 TRENTON SAFETY SHOE
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Anti-scuff toe & heel
• Removable dual density insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 660g
Black
Padded collar & tongue
Leather
Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
Fuel & oil resistant
Anti-scuff heel
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
Anti-scuff
toe & heel
Anti-scuff
toe & heel
CLASSIC CLASSIC
Dickies 2019/2020 Workwear 035034 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
19. Safety Footwear S1-P Safety Footwear S1-P
|FA13310A CLIFTON II SAFETY SHOE
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Padded collar
|SOLE:
• Dual density polyurethane
• Direct injection construction
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 650g
Black
Steel anti-penetration
underfoot protectionDual density polyurethane
Energy
absorbing sole
Steel toe-cap
|FA23330A REDLAND II SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 710g
Padded collar & tongue
Steel toe-cap
Energy absorbing
Direct injection construction
SRC slip resistant
Breathable textile lining
Black
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGIONCLASSIC CLASSIC
Dickies 2019/2020 Workwear 037036 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
20. Safety Footwear S1-P Safety Footwear S1-P
|FA12365A EXECUTIVE SAFETY SHOE
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER
• Full grain leather
• Breathable textile lining
• Padded collar
|SOLE:
• Polyurethane
• SRA slip resistant
• Direct injection construction
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 614g
Padded collar Padded collar
Steel toe-cap
Steel anti-penetration
underfoot protection
Steel anti-penetration
underfoot protection
Direct injection construction Direct injection construction
SRA slip resistant
|FA12350A OXFORD SAFETY SHOE
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Full grain leather
• Breathable textile lining
• Padded collar
|SOLE:
• Direct injection construction
• Polyurethane
• SRA slip resistant
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 598g
Black
Steel toe-cap
Removable
EVA insole
SRA
SLIP
RESISTANCE
SRA
SLIP
RESISTANCE
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
Black
CLASSIC CLASSIC
Dickies 2019/2020 Workwear 039038 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
21. SRC
SLIP
RESISTANCE
Safety Footwear S1-P
|FA23385S STORM II SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Suede & mesh
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Anti-scuff toe & heel
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 732g
Padded collar & tongue
Steel toe-cap
Energy absorbing
Direct injection construction
SRC slip resistant
Breathable
textile lining
Grey Black
Safety Footwear S1-P
|FA23380A FURY SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Padded collar & tongue
• Heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRA slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 708g
Black
Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
SRA slip resistant
Energy
absorbing sole
Padded
collar & tongue
Heel puller
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
SRA
SLIP
RESISTANCE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ENERGY
ABSORPTION
OF SEAT REGION
SB
TOE
PROTECTION
Anti-scuff
toe & heel
CLASSIC CLASSIC
Dickies 2019/2020 Workwear 041040 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
22. Safety Footwear S1-PSafety Footwear S1-P
|FA13335 STOCKTON SAFETY TRAINER
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather & mesh
• Breathable textile lining
• Padded collar & tongue
• Heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRA slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 682g
Black
Steel toe-cap
Steel anti-penetration
underfoot protectionDirect injection construction
SRA slip resistant
Padded
collar & tongue
|FA23333 ANTRIM SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRA slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S1-P SRA
|SIZES:
Black
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4
Brown
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 652g
Steel toe-cap
Direct injection construction
Padded collar & tongue
Energy
absorbing sole
Breathable
textile lining
Brown Black
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
SRA
SLIP
RESISTANCE
SB
TOE
PROTECTION
SB
TOE
PROTECTIONCLASSIC CLASSIC
SRA
SLIP
RESISTANCE
SRA slip resistant
Dickies 2019/2020 Workwear 043042 Dickies 2019/2020 Workwear
S1-P
FOOTWEAR
23. S3 FOOTWEAR
SAFETY CLASSIFICATIONSSafety footwear standard EN345 is being superseded by EN ISO 20345. Any footwear
that has been tested to EN345 can continue to be sold, however any new designs will
have to be tested to the new standard.
Which standard your footwear is tested to is identified on the product information
label, this is found within the boot or shoe.
SB-P
Toe protection tested with 200 joules impact and 15kN compression force.
‘P’ refers to penetration resistance outsole.
S1
As SB, plus:
Closed seat region (fully enclosed heel)
Anti-static properties
Energy absorption of seat region
Resistance to fuel and oil
S2
As S1, plus:
Water penetration and absorption resistance
S3
As S1, plus:
Penetration resistance
Cleated outsole
SRA
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
Slip resistance on a ceramic tile
floor with sodium lauryl sulphate
solution
Slip resistance on steel floor
with glycerol and ceramic tile
floor with sodium lauryl sulphate
solution
Dickies 2019/2020 Workwear 045
S3
FOOTWEAR
044 Dickies 2019/2020 Workwear
25. Safety Footwear S3
|FC9526 PHOENIX SAFETY BOOT
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Textile/other
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRC slip resistant
• Fuel & oil resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe
• Removable foam insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 621g
Black/Lime
Padded collar & tongue
Textile/other
Composite toe-cap
Non-metallic anti-penetration
underfoot protection
Anti-scuff toe
Cemented construction
Fuel & oil resistant
Dual density EVA/rubber
Grey/White
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
WATER
RESISTANTPREMIUM
Padded collar & tongue
Textile/other
Composite
toe-cap
Non-metallic anti-penetration
underfoot protection
Anti-scuff toe
Cemented construction
Fuel & oil resistant
Dual density EVA/rubber
Safety Footwear S3
|FC9527 PHOENIX SAFETY TRAINER
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Textile/other
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRC slip resistant
• Fuel & oil resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe
• Removable foam insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 543g
Black/Lime Grey/White
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
WATER
RESISTANTPREMIUM
Dickies 2019/2020 Workwear 049
S3
FOOTWEAR
048 Dickies 2019/2020 Workwear
26. |FC9532 EMERSON TRAINER
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Nubuck & mesh
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRC slip resistant
• Fuel & oil resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe
• Removable foam insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 578g
Black Black/Royal
Nubuck & mesh
Padded collar & tongue
Composite
toe-cap
Non-metallic anti-penetration underfoot protectionCemented construction
Dual density EVA/rubber
Safety Footwear S3
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCEEXPERT
Safety Footwear S3
|FC23530 TIBER SAFETY TRAINER
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Mesh & microfiber
• Breathable mesh lining
• Padded collar & tongue
• Heel puller
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe
• Non-removable foam insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 515g
Royal
Black Navy
Red
Padded collar & tongue
Heel puller
Breathable
mesh lining
Energy
absorbing sole
Composite
toe-cap
Dual density EVA/rubber
Cemented construction
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
SRC
SLIP
RESISTANCE
WATER
RESISTANT
Anti-scuff toe
EXPERT
METAL
FREE
METAL
FREE
Dickies 2019/2020 Workwear 051
S3
FOOTWEAR
050 Dickies 2019/2020 Workwear
27. Safety Footwear S3
|FC9516 GIRONDE SAFETY BOOT
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Nubuck & mesh
• Breathable textile lining
• Full padded lining
• Heel puller
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Anti-scuff toe & heel
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 651g
Nubuck & mesh
Composite toe-cap
Non-metallic anti-penetration
underfoot protection
Anti-scuff
toe & heelCemented construction
Energy
absorbing
sole
Dual density EVA/rubber
BrownBlack
Safety Footwear S3
|FC9508 GIRONDE SAFETY TRAINER
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Nubuck & mesh
• Breathable textile lining
• Full padded lining
• Heel puller
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Anti-scuff toe & heel
• Non-removable foam insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 599g
BrownBlack
Heel puller
Breathable
mesh lining
Composite toe-cap
Dual density EVA/rubber
Cemented construction
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
WATER
RESISTANT
WATER
RESISTANT
Energy
absorbing
sole
Anti-scuff toe & heel
EXPERTEXPERT
Dickies 2019/2020 Workwear 053
S3
FOOTWEAR
052 Dickies 2019/2020 Workwear
28. Safety Footwear S3
|FC9535 CAMERON BOOT
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Leather & mesh
• Breathable mesh lining
• Padded collar & tongue
• Leather heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Waterproof membrane
• Metal free
• Anti-scuff toe
• Removable foam insole
|SPECIFICATION:
EN ISO 20345:2011 S3 WR SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 742g
Black Brown
Padded collar & tongue
Leather & mesh
Composite toe-cap
Non-metallic anti-penetration
underfoot protection
Direct injection construction
Fuel & oil resistant
Dual density
polyurethane
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
WATERPROOF
MEMBRANE
Anti-scuff toe
EXPERT
Safety Footwear S3
|FD23310 MEDWAY SAFETY HIKER
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Crazy horse leather
• 3M Thinsulate™
lining
• Padded collar & tongue
|SOLE:
• Cemented construction
• Dual density EVA/rubber
• SRA slip resistant
• Fuel & oil resistant
• Heat resistant up to 300°C
• Energy absorbing
|ADDITIONAL FEATURES:
• Waterproof membrane
• Removable PU insole
• Anti-scuff toe & heel
|SPECIFICATION:
EN ISO 20345:2011 S3 WR HRO SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 847g
Black Brown
Padded collar & tongue
Crazy horse leather
Anti-scuff heel
Steel toe-cap
3M Thinsulate™
lining
Steel anti-penetration
underfoot protectionCemented construction
Dual density EVA/rubber
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
WATER
RESISTANT
WATERPROOF
MEMBRANE
SRA
SLIP
RESISTANCE
HRO
FOOTWEAR
PREMIUM
Anti-scuff toe
METAL
FREE
•
Dickies 2019/2020 Workwear 055
S3
FOOTWEAR
054 Dickies 2019/2020 Workwear
29. Safety Footwear S3
|FA9006S NORDEN II SAFETY SHOE
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Crazy horse leather
• Breathable textile lining
• Padded collar & tongue
• Reflective trim
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Anti-scuff toe
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 668g
Black
Crazy horse leather Steel toe-cap
Energy absorbing
Direct injection construction
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
SRC
SLIP
RESISTANCE
WATER
RESISTANT
|FA9005S DAVANT II SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Crazy horse leather
• Breathable textile lining
• Padded collar & tongue
• Reflective trim
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Anti-scuff toe
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 716g
Black
Steel toe-cap
Energy absorbing
Direct injection construction
Brown
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
SRC
SLIP
RESISTANCE
WATER
RESISTANT
Safety Footwear S3
Reflective trim
Crazy horse
leather
CLASSICCLASSIC
Dickies 2019/2020 Workwear 057
S3
FOOTWEAR
056 Dickies 2019/2020 Workwear
30. Safety Footwear S3
|FC9534 ANDOVER SHOE
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Leather & mesh
• Breathable mesh lining
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe
• Removable dual density insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 610g
Black
Padded collar & tongue
Leather & mesh
Composite toe-cap
Non-metallic anti-penetration
underfoot protectionDual density polyurethane
Direct injection construction
Safety Footwear S3
|FC9533 ANDOVER BOOT
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Leather & mesh
• Breathable mesh lining
• Padded collar & tongue
• Heel puller
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe
• Removable dual density insole
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 636g
Black
Padded collar & tongue
Leather & mesh
Anti-scuff toe Anti-scuff toe
Non-metallic anti-penetration
underfoot protection
Dual density polyurethane
Direct injection construction
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
OUTSOLE
RESISTANT TO
FUEL & OIL
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
WATER
RESISTANT
WATER
RESISTANTCLASSIC CLASSIC
METAL
FREE
METAL
FREE
Dickies 2019/2020 Workwear 059
S3
FOOTWEAR
058 Dickies 2019/2020 Workwear
31. Safety Footwear S3
|FC9528 & FC9529 STAFFORD TEXTILE & FUR LINED SAFETY RIGGER
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
|UPPER:
• Full grain leather
• Breathable textile lining -
Stafford Textile
• Fur lining - Stafford Fur Lined
|SOLE:
• Direct injection construction
• Dual density polyurethane/rubber
• SRC slip resistant
• Fuel & oil resistant
• Energy absorbing
• Heat resistant up to 300°C
|ADDITIONAL FEATURES:
• Water resistant
• Metal free
• Anti-scuff toe & heel
• Removable EVA insole
|SPECIFICATION:
EN ISO 20345:2011 S3 HRO SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 873g
Brown
Full grain leather
Composite
toe-cap
Anti-scuff
toe & heel
Anti-scuff
toe & heel
Non-metallic anti-penetration
underfoot protection
Direct injection construction
Dual density polyurethane/rubber
Safety Footwear S3
|FA23355S&FA23350S DIXONTEXTILE&FURLINEDSAFETYRIGGER
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Breathable textile/fur lining
• Pull up loops
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Removable EVA insole
• Anti-scuff toe
|SPECIFICATION:
EN ISO 20345:2011 S3 SRC
|SIZES:
Textile Lined - FA23355S
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
Fur Lined - FA23350S
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 823g - Textile Lined Rigger
Based on a UK size 8: 830g - Fur Lined Rigger
Tan
Breathable textile/fur lining
Pull up loops
Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
SRC slip resistant
Dual density polyurethane
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
WATER
RESISTANT
WATER
RESISTANT
HRO
FOOTWEAR
OUTSOLE
RESISTANT TO
FUEL & OIL
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE CLASSICPREMIUM
Dickies 2019/2020 Workwear 061
S3
FOOTWEAR
060 Dickies 2019/2020 Workwear
32. Safety Footwear S3
|FA9009 & FA9012 CASPIAN FUR & TEXTILE LINED BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather
• Mock fur lining - Caspian Fur Lined
• Textile lining - Caspian Textile Lined
• Padded collar & tongue
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Non-marking
• Energy absorbing
|ADDITIONAL FEATURES:
• Anti-scuff toe
• Removable dual density insole
|SPECIFICATION:
EN ISO 20345:2011 S3 CI SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 776g - Fur Lined Boot
Based on a UK size 8: 734g - Textile Lined Boot
Black
Mock fur lining
Leather
Steel toe-cap
SRC slip resistant
Direct injection construction
Padded collar & tongue
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
SRC
SLIP
RESISTANCE
OUTSOLE
RESISTANT TO
FUEL & OIL
LINING
Anti-scuff
toe & heel
EXPERT
S3SAFETYFOOTWEAR
CASPIANFUR &TEXTILELINEDBOOT
Dickies 2019/2020 Workwear 063
S3
FOOTWEAR
062 Dickies 2019/2020 Workwear
33. Safety Footwear S3
|FD7000S/FD7000W TX PRO SAFETY BOOT/TX PRO WINTER BOOT
|COLOURS: |PROTECTION:
• Composite toe-cap
• Non-metallic anti-penetration
underfoot protection
• Anti-static
• ESD
|UPPER:
• Full grain leather
• Breathable textile lining
• Heel puller
• YKK™
zip fastening
|SOLE:
• Direct injection construction
• Dual density polyurethane/rubber
• SRC slip resistant
• Heat resistant up to 300°C
• Energy absorbing
|ADDITIONAL FEATURES:
• Water resistant
• Anti-scuff toe & heel
• Removable EVA insole
• No exposed metal
• Winter Boot - Insulation against cold
• Winter Boot - 3M Thinsulate™
lining
|SPECIFICATION:
EN ISO 20345:2011 S3 HRO SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 867g
Black
Full grain leather
Padded collar & tongue
Heel puller
TPU heel stabiliser
Composite toe-cap
Non-metallic anti-penetration
underfoot protection
Direct injection construction
Heat resistant up to 300°C
Dual density
polyurethane/rubber
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
WATER
RESISTANT
HRO
FOOTWEAR
SRC
SLIP
RESISTANCEPREMIUM
Anti-scuff toe & heel
ESD
FOOTWEAR
|FD9218 TRENTON PRO SAFETY BOOT
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Leather/textile
• Breathable textile lining
• Padded collar & tongue
• Leather heel puller
• YKK™
zip fastening
|SOLE:
• Direct injection construction
• Dual density polyurethane
• SRC slip resistant
• Fuel & oil resistant
• Energy absorbing
• Non-marking
|ADDITIONAL FEATURES:
• Waterproof membrane
• Anti-scuff toe & heel
• Removable dual density insole
|SPECIFICATION:
EN ISO 20345:2011 S3 WR SRC
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 873g
Black
Leather/textile
Padded collar & tongue
Steel toe-cap
Steel anti-penetration
underfoot protection
Direct injection construction
Dual density polyurethane
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
HRO
FOOTWEAR
SRC
SLIP
RESISTANCE
WATERPROOF
MEMBRANE
Anti-scuff
toe & heel
Safety Footwear S3
EXPERT
WINTER BOOT ONLY
WATERPROOF
MEMBRANE
LINING
Dickies 2019/2020 Workwear 065
S3
FOOTWEAR
064 Dickies 2019/2020 Workwear
34. WELLINGTONS &
NON-SAFETY BOOTS
SAFETY CLASSIFICATIONSSafety footwear standard EN345 is being superseded by EN ISO 20345. Any footwear
that has been tested to EN345 can continue to be sold, however any new designs will
have to be tested to the new standard.
Which standard your footwear is tested to is identified on the product information
label, this is found within the boot or shoe.
SRA
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
Slip resistance on a ceramic tile
floor with sodium lauryl sulphate
solution
Slip resistance on steel floor
with glycerol and ceramic tile
floor with sodium lauryl sulphate
solution
SB-P
Toe protection tested with 200 joules
impact and 15kN compression force.
‘P’ refers to penetration resistance outsole.
S1
As SB, plus:
Closed seat region (fully enclosed heel)
Anti-static properties
Energy absorption of seat region
Resistance to fuel and oil
S2
As S1, plus:
Water penetration and absorption resistance
S3
As S1, plus:
Penetration resistance
Cleated outsole
S4
Upper from all rubber or all polymeric with:
SB toe protection
Closed seat region
Anti-static properties
Energy absorption of seat region
Resistance to fuel and oil
S5
As S4, plus:
Penetration resistance
Cleated outsole
Dickies 2019/2020 Workwear 067066 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
35. NEW
FW91105A LANDMASTER 2.0 NON-SAFETY
WELLINGTON BOOT
Page 072
FW94105A LANDMASTER 2.0
SAFETY WELLINGTON BOOT
Page 073
NEW
NEW
WELLINGTONS & NON-SAFETY BOOTS Give it some welly with our extensive range of Wellington boots. We’ve got high-performance Landmasters that fulfil site safety
requirements and sturdy Pennines that are at home on the farm. We’ve also got a range for those who require a durable work
boot without toe caps.
FW9901 LANDMASTER PRO
NON-SAFETY WELLINGTON
Page 070
FW9902 LANDMASTER PRO
SAFETY WELLINGTON
Page 071
FW13200 GROUNDWATER
SAFETY WELLINGTON
Page 076
FW13105 DICKIES SAFETY
WELLINGTON
Page 077
FN23700 TRINITY NON-SAFETY BOOT
Page 080
FN23600 WELTON NON-SAFETY BOOT
Page 081
FW91105 LANDMASTER
NON-SAFETY WELLINGTON
Page 074
FW94105 LANDMASTER
SAFETY WELLINGTON BOOT
Page 075
FW11100 PENNINE
WELLINGTON
Page 079
Dickies 2019/2020 Workwear 069068 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
36. WELLINGTONS
|FW9901 LANDMASTERPRONON-SAFETYWELLINGTON
|COLOURS: |UPPER:
• Rubber & neoprene
• Breathable mesh lining
• Reflective trim
|SOLE:
• Vulcanised construction
• Rubber
• SRA slip resistant
|ADDITIONAL FEATURES:
• Insulation against cold
• Heel kick-off spur
• Removable PU insole
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 1506g
Dark Green
Wellingtons
|FW9902LANDMASTERPROSAFETYWELLINGTON
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• Rubber & neoprene
• Breathable mesh lining
|SOLE:
• Vulcanised construction
• Rubber
• SRA slip resistant
• Removable PU insole
• Reflective trim
|ADDITIONAL FEATURES:
• Insulation against cold
• Heel kick-off spur
• Removable PU insole
|SPECIFICATION:
EN ISO 20345:2011 S5 HRO CI SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 1643g
Black/
Grey
Black/
Red
Green Navy/
Grey
Reflective trim
Steel toe-cap
Rubber &
neoprene
Steel anti-penetration
underfoot protection
SRA slip resistant
Heel kick-off spur
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
LINING
LINING
PREMIUM
PREMIUM
Reflective trim
Heel kick-off spur
SRA
SLIP
RESISTANCE
SRA
SLIP
RESISTANCE
ENHANCED
REFLECTIVITY
ENHANCED
REFLECTIVITY
WATER
PROOF
WATER
PROOF
Dickies 2019/2020 Workwear 071070 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
37. NEW
NEW
WELLINGTONS
|FW91105A LANDMASTER2.0NON-SAFETYWELLINGTONBOOT |FW94105A LANDMASTER2.0SAFETYWELLINGTONBOOT
|COLOURS: |COLOURS:|UPPER:
• Polyurethane
|SOLE:
• Direct injection construction
• Polyurethane/thermoplastic
polyurethane
|ADDITIONAL FEATURES:
• Waterproof
• Metal free
• Heel kick-off spur
• Removable comfort foam insole
• Anti-static
|PROTECTION:
• Anti-static
|UPPER:
• Polyurethane
|SOLE:
• Direct injection construction
• Polyurethane/thermoplastic
polyurethane
|ADDITIONAL FEATURES:
• Waterproof
• Heel kick-off spur
• Removable comfort foam insole
|SPECIFICATION:
EN ISO 20347:2012 04 SRC
|SIZES:
3 4 5 5.5 6 6.5 7 8 9 10 10.5 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 804g
|SPECIFICATION:
EN ISO 20345:2011 S5 CI SRC
|SIZES:
3 4 5 5.5 6 6.5 7 8 9 10 10.5 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 942g
Green Green
Polyurethane
Steel anti-penetration
underfoot protection
TPU insert
Kick off spur
Steel
toe-
cap
Polyurethane
WELLINGTONS
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTIONEXPERT EXPERT
SRC
SLIP
RESISTANCE
SRC
SLIP
RESISTANCE
WATER
PROOF
WATER
PROOF
ANTI-STATIC
FOOTWEAR LININGMETAL
FREE
Dickies 2019/2020 Workwear 073072 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
38. ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
|FW91105 LANDMASTER NON-SAFETY WELLINGTON |FW94105 LANDMASTER SAFETY WELLINGTON
|COLOURS: |COLOURS:|UPPER:
• Polyurethane
|SOLE:
• Direct injection construction
• Polyurethane
• SRA slip resistant
|ADDITIONAL FEATURES:
• Anti-static
• Heel kick-off spur
• Removable dual density insole
|PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
|UPPER:
• Polyurethane
|SOLE:
• Direct injection construction
• Polyurethane
• SRA slip resistant
|ADDITIONAL FEATURES:
• Anti-static
• Heel kick-off spur
• Removable dual density insole
|SPECIFICATION:
EN ISO 20347:2012 04 SRA
|SIZES:
3 4 5 5.5 6 6.5 7 8 9 10 10.5 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 853g
|SPECIFICATION:
EN ISO 20347:2012 04 SRA/EN ISO 20345:2011 S5 CI SRA
|SIZES:
3 4 5 5.5 6 6.5 7 8 9 10 10.5 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 956g
Green Green
WELLINGTONS WELLINGTONS
Waterproof Waterproof
Removable dual
density insole
Removable dual
density insole
Steel anti-penetration
underfoot protection
Steel toe-cap
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTIONEXPERT
EXPERT
SRA
SLIP
RESISTANCE
SRA
SLIP
RESISTANCE
WATER
PROOF
WATER
PROOF
Dickies 2019/2020 Workwear 075074 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
39. CLASSIC
WELLINGTONS
|FW13200 GROUNDWATERSAFETYWELLINGTON
|COLOURS: |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• PVC
• Mock fur lining
• Pull up loops
|SOLE:
• Direct injection construction
• Nitrile PVC
• SRA slip resistant
|ADDITIONAL FEATURES:
• Waterproof
• Heel kick-off spur
|SPECIFICATION:
EN ISO 20345:2011 S5 SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 1208g
Brown
Pull up loops
PVC
Steel toe-cap
Waterproof
Steel anti-penetration
underfoot protectionSRA slip resistant
Heel kick-off spur
WELLINGTONS
|FW13105 DICKIES SAFETY WELLINGTON
|COLOURS : |PROTECTION:
• Steel toe-cap
• Steel anti-penetration underfoot
protection
• Anti-static
|UPPER:
• PVC
• Textile lining
|SOLE:
• Direct injection construction
• Nitrile PVC
• SRA slip resistant
|ADDITIONAL FEATURES:
• Waterproof
• Heel kick-off spur
|SPECIFICATIONS:
EN ISO 20345:2011 S5 SRA
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 1056g
Black
PENETRATION
RESISTANCE
OUTSOLE
PENETRATION
RESISTANCE
OUTSOLE
ANTI-STATIC
FOOTWEAR
ANTI-STATIC
FOOTWEAR
SB
TOE
PROTECTION
SB
TOE
PROTECTION
ENERGY
ABSORPTION
OF SEAT REGION
ENERGY
ABSORPTION
OF SEAT REGION
SRA
SLIP
RESISTANCE
SRA
SLIP
RESISTANCEEXPERT
PVC
Steel toe-cap
Waterproof
Steel anti-penetration
underfoot protectionSRA slip resistant
Heel kick-off spur
WATER
PROOF
WATER
PROOF
Dickies 2019/2020 Workwear 077076 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
40. WD4839REDHAWKZIPFRONTCOVERALLPAGE130
WELLINGTONS
|FW11100 PENNINE WELLINGTON
|COLOURS : |MATERIAL:
• Lining - 65% spandex, 35% polyester
|UPPER:
• PVC
|SOLE:
• Direct injection construction
• Nitrile PVC
• SRA slip resistant
|ADDITIONAL FEATURES:
• Waterproof
• Metal free
• Heel kick-off spur
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4 4 4
|WEIGHT:
Based on a size UK 8: 858g
Green
CLASSIC WATER
PROOF
METAL
FREE
Waterproof
PVC
Dickies 2019/2020 Workwear 079078 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
41. NON-SAFETYFOOTWEAR
|FN23700 TRINITY NON-SAFETY BOOT
|COLOURS: |UPPER:
• Full grain leather
• Breathable textile lining
• Leather heel puller
• Elasticated gusset
|SOLE:
• Goodyear welted construction
• Dual density EVA/rubber
|ADDITIONAL FEATURES:
• Cushioned insole
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 735g
Brown
Leather heel puller
Elasticated gusset
Goodyear welted
constructionNitrile rubber
Cushioned insole
NON-SAFETY FOOTWEAR
|FN23600 WELTON NON-SAFETY BOOT
|COLOURS : |UPPER:
• Full grain leather
• Breathable textile lining
• Padded collar & tongue
|SOLE:
• Goodyear welted construction
• Dual density EVA/rubber
|ADDITIONAL FEATURES :
• Cushioned insole
|SIZES:
3 4 5 5.5 6 7 8 9 10 11 11.5 12 13 14
4 4 4 4 4 4 4 4
|WEIGHT:
Based on a UK size 8: 760g
Brown
Goodyear welted construction
PREMIUM PREMIUM
Dickies 2019/2020 Workwear 081080 Dickies 2019/2020 Workwear
WELLINGTONS
&NONSAFTEY
43. NEW
NEW NEW
NEW
084 Dickies 2018/19 Workwear 085 Dickies 2018/19 Workwear
DP1000 DICKIES PRO TROUSERS
Page 086
WD4901 GDT PREMIUM TROUSERS
Page 090
EH34000 EISENHOWER PREMIUM
TROUSERS
Page 088
EH26800 EISENHOWER MULTI-POCKET
TROUSERS
Page 097
DP1005 DICKIES PRO HOLSTER TROUSERS
Page 087
EH26801 EISENHOWER EXTREME
TROUSERS
Page 089
ED24/7 EVERYDAY TROUSERS
Page 098
WD801 REDHAWK PRO
TROUSERS
Page 096
WD884 REDHAWK SUPER WORK TROUSERS
Page 100
EDCVCTRSR CVC TROUSERS
Page 099
WD814 REDHAWK MEN’S ACTION TROUSERS
Page 101
WD864 REDHAWK TROUSERS
Page 102
DT1007 STANMORE JEANS
Page 106
TR41500 REAPER TROUSERS
Page 104
WD1000 BOSTON JEANS
Page 108
WD803 REDHAWK CHINO TROUSERS
Page 103
TR2008 JOGGERS
Page 105
WD1693 STONE WASHED WORK JEANS
Page 109
DP1006 DICKIES PRO SHORTS
Page 110
IN30050 INDUSTRY TWO TONE SHORTS
Page 116
WD4979 GDT 210 SHORTS
Page 114
WD834 REDHAWK CARGO SHORTS
Page 119
EH34001 EISENHOWER PREMIUM SHORTS
Page 112
EH26802 EISENHOWER EXTREME SHORTS
Page 113
WD802 REDHAWK PRO SHORTS
Page 118
WD4903 GDT PREMIUM SHORTS
Page 115
ED24/7SH EVERYDAY SHORTS
Page 117
NEWCOLOUR
WD4930 GDT 290 TROUSERS
Page 094
IN30032 INDUSTRY TROUSERS 2.0
Page 092
EH30050 EISENHOWER MAX TROUSERS
Page 093
CV1000R LAKEMONT TROUSERS
Page 095
trousers & SHORTS
Dickies’ work trousers are constructed to cope with whatever life throws at you. Whether reinforced, waterproof, hi-vis, or with
built-in knee pockets, they make light work of even the harshest conditions. We’ve even got a range of shorts to keep cool in
during the summer months.
Dickies 2019/2020 Workwear 085
TROUSERS&
SHORTS
084 Dickies 2019/2020 Workwear
44. |DP1000 Dickies Pro Trousers
|COLOURS:
Hip pockets
CORDURA®
ruler pocket
YKK™
zip fly
CORDURA®
knee pad
pockets
CORDURA®
reinforced
holster pockets
CORDURA®
cargo pocket
CORDURA®
hem guards
Stretch waistband
|DP1005S/DP1005R/DP1005T Dickies Pro Holster TrouserS
Slim
Fit
FLEX
FABRICPREMIUM
TROUSERS TROUSERS
|WASHCARE:
|FABRIC:
65% polyester, 35% cotton ripstop,
270g/m2
|ADDITIONAL FEATURES:
• When used in combination with
Dickies SA70 Knee Pads, this
trouser conforms to:
EN ISO 13688 : 2013 and
EN 14404 : 2004 + A1 : 2010
|SIZES:
Short
24 25 26 27 28 29
4 4 4 4 4 4
Regular
40 42 44 46 48 50 52 54 56 58 60 62 64
4 4 4 4 4 4 4 4 4 4 4
Tall
90 94 98 102 106 110
4 4 4 4 4 4
Black & Grey/Black also available in EU 40 & 42
Slim
Fit
FLEX
FABRICPREMIUM
Black/
Black
Royal/
Black
Green/
Black
Grey/
Black
Yellow/
Black
Hip pockets
TenCate®
European
fabric stretch back
waistband
YKK™
zip fly
CORDURA®
reinforced
pockets
CORDURA®
knee pad
pockets
CORDURA®
hem guards
Reflective
detailing
|COLOURS:
Black/
Grey
Grey/
Black
|WASHCARE:
|FABRIC:
65% polyester, 35% cotton, 270g/m2
|ADDITIONAL FEATURES:
• Ergonomic fit
• CORDURA®
back pockets
• When used in combination with
Dickies SA70 Knee Pads, this trouser
conforms to: EN ISO 13688 : 2013 and
EN 14404 : 2004 + A1 : 2010
|SIZES:
DP1005S - Short
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4
DP1005R - Regular
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4 4
DP1005T - Tall
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
UK SIZE
EQUIVALENT
IND SIZE
34S 24
36S 25
38S 26
40S 27
42S 28
44S 29
26R 40
28R 42
30R 44
32R 46
33R 48
34R 50
36R 52
38R 54
40R 56
42R 58
44R 60
46R 62
48R 64
30T 90
32T 94
33T 98
34T 102
36T 106
38T 110
Please note this chart shows the
closest Industry Range equivalent
to the UK size system.
Dickies 2019/2020 Workwear 087
TROUSERS&
SHORTS
086 Dickies 2019/2020 Workwear
45. |EH34000/EH34000OS Eisenhower Premium Trousers
|COLOURS:
Black
|SIZES:
Short
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
EH34000OS also available in 28" waist in Small, Regular & Tall
|FABRIC:
65% polyester, 35% cotton ripstop
with Teflon™
coating, 270g/m2
|WASHCARE:
D j H J U
|ADDITIONAL FEATURES:
• CORDURA®
reinforced back pockets
• CORDURA®
hammer loop
• CORDURA®
reinforced cargo pocket
• Teflon™
coated water and stain
repellent fabric
• When used in combination with SA70
Knee Pads this trouser conforms to
EN ISO 13688:2013 and
EN 14404:2004 + A1:2010
YKK™
zip fly
D-ring
CORDURA®
knee pad
pockets
CORDURA®
hem guards
Ruler pocket
Holster pockets
|EH26801 Eisenhower Extreme Trousers
|COLOURS:
Grey Navy Black
|SIZES:
Short
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4 4
|FABRIC:
65% polyester, 35% cotton canvas,
300g/m2
|WASHCARE:
D h H J U
|ADDITIONAL FEATURES:
• Back pockets
• Ruler pocket
Hip pocket
Elasticated
waistband
Holster pockets
CORDURA®
knee pad
pockets
CORDURA®
hem guards
Cargo pocket
YKK™
zip fly
Hammer loop
R Regular
FitEXPERT
TROUSERS TROUSERS
PREMIUM R Regular
Fit
WATER
REPELLENT
STAIN
RELEASE
Dickies 2019/2020 Workwear 089
TROUSERS&
SHORTS
088 Dickies 2019/2020 Workwear
46. |SIZES:
Short - Black/Grey, Grey/Black & Stone/Black
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Regular - Black/Grey, Grey/Black, Teal/Black & Stone/Black
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4
Tall - Black/Grey & Stone/Black
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
|WD4901 GDT PREMIUM TROUSERS
|COLOURS:
Black/
Grey
Grey/
Black
Teal/
Black
Stone/
Black
|FABRIC:
98% cotton, 2% elastane, 275g/m2
100% CORDURA®
reinforcement
|WASHCARE:
D j H J U
|ADDITIONAL FEATURES:
• Two back pockets
• Ruler pocket
• When used in combination with
Dickies SA70 Knee Pads, this trouser
conforms to EN ISO 13688:2013 and
EN 14404:2004 +A1:2010
YKK™
zip front
Gusset
at crotch
Cargo pocket
reinforced
with
CORDURA®
Reflective
heat seal
chevron
Side elasticated
adjustable waistband
CORDURA®
top loading
knee pad
pockets
CORDURA®
hemguards
Two hip pockets
NEW
COLOUR
TROUSERS
R Regular
Fit
COTTON
RICH
FLEX
FABRICPREMIUM
SOFT
TOUCH
FABRIC
Dickies 2019/2020 Workwear 091
TROUSERS&
SHORTS
090 Dickies 2019/2020 Workwear
47. |EH30050 Eisenhower Max Trousers
|COLOURS:
Black
|Sizes:
Short
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
|FABRIC:
65% polyester, 35% cotton canvas.
CORDURA® knee pad pockets and
trims, 285g/m2
|WASHCARE:
D h H J U
|ADDITIONAL FEATURES:
• When used in combination with SA70
Knee Pads this trouser conforms to
EN ISO 13688:2013 and
EN 14404:2004 + A1:2010
Holster pockets
CORDURA®
external hem
guards
Reflective piping
YKK™
zips
Grey
CORDURA®
knee pad
pockets
PREMIUM R Regular
Fit
TROUSERS TROUSERS
NEW
UK SIZE
EQUIVALENT
IND SIZE
34S 24
36S 25
38S 26
40S 27
42S 28
44S 29
26R 40
28R 42
30R 44
32R 46
33R 48
34R 50
36R 52
38R 54
40R 56
42R 58
44R 60
46R 62
48R 64
30T 90
32T 94
33T 98
34T 102
36T 106
38T 110
Please note this chart shows the
closest Industry Range equivalent
to the UK size system.
|IN30032 INDUSTRY TROUSERS 2.0
|COLOURS: |FABRIC:
65% polyester, 35% cotton, 300g/m²
|WASHCARE:
E H j J T
|ADDITIONAL FEATURES:
• Two back pockets
• Anti-scratch trims
• Triple stitched
• Anti-scratch D-Ring
• Concealed elasticated waistband
Ruler pocket
Bottom
loading
Knee Pad
pockets
Grey/
Black
Versatile &
large cargo
pockets
Navy/
Royal
Royal/
Navy
Green/
Black
Black/
Black
Two side pockets
Hammer Loop
YKK™
nylon
zip front
Anti-scratch
buttons
PREMIUM Rx
Relaxed
Fit
|SIZES:
Short
24 25 26 27 28 29
4 4 4 4 4 4
Regular
44 46 48 50 52 54 56 58 60 62 64
4 4 4 4 4 4 4 4 4 4 4
Tall
90 94 98 102 106 110
4 4 4 4 4 4
Black/Black & Grey/Black also available in 40 & 42 Regular
Dickies 2019/2020 Workwear 093
TROUSERS&
SHORTS
092 Dickies 2019/2020 Workwear
48. |FABRIC:
100% cotton, 290g/m2
100% CORDURA®
reinforcement
|WASHCARE:
D h H L V
|ADDITIONAL FEATURES:
• Ruler pocket
• Triple stitch detail using Coats®
thread throughout
|WD4930 GDT 290 Trousers
|COLOURS:
Black/
Black
Grey/
Black
Khaki/
Black
White/
Grey
Navy/
Black
YKK™
zip fly
Cargo pocket with
mobile phone
pocket
Hammer loop
Side elastication
CORDURA®
knee pad
pockets
Olive/
Black
Brown/
Black
R Regular
Fit
100%
COTTONEXPERT
TROUSERS
|SIZES:
Short - Black/Black, Grey/Black, Navy/Black, White/Grey & Khaki/Black
24 26 28 30 32 33 34 36 38 40 44 46 48 50 52
4 4 4 4 4 4
Regular - Black/Black, Grey/Black, Navy/Black & Khaki/Black
24 26 28 30 32 33 34 36 38 40 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
Regular - White/Grey, Olive/Black & Brown/Black
24 26 28 30 32 33 34 36 38 40 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall - Black/Black, Grey/Black, Navy/Black, White/Grey & Khaki/Black
24 26 28 30 32 33 34 36 38 40 44 46 48 50 52
4 4 4 4 4 4 4 4
White/Grey also available in 46" Tall
Black/
Lime
Black/
Red
Grey/
Royal
|CV1000R Lakemont Trousers
|COLOURS: |SIZES:
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4 4
|FABRIC:
60% cotton, 40% polyester, 280g/m2
|WASHCARE:
D j H J U
|ADDITIONAL FEATURES:
• Back pockets
• Back gusset
• Metal free
Cargo pocket
Hip pockets
Elasticated waist
Contrast stitching
PREMIUM
TROUSERS
CORDURA®
hemguards
COTTON
RICH
Tapered
FitT METAL
FREE
Dickies 2019/2020 Workwear 095
TROUSERS&
SHORTS
094 Dickies 2019/2020 Workwear
49. |WD801/WD801OS/WD80133 Redhawk Pro TrouserS
Holster pockets
Cargo pocket
Knee pad pockets
Button and YKK™
zip fastening
Ruler pocket
|COLOURS: |FABRIC:
65% polyester, 35% cotton, 260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Back pockets
• Hammer loop
• Triple stitched detailing
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
WD801OS also available in 28" waist in Small, Regular & Tall
WD80133 also available in 33" waist in Regular & Tall
Black Grey Navy
R Regular
FitEXPERT
TROUSERS
|EH26800/EH26800OS Eisenhower Multi-Pocket Trousers
|COLOURS:
Navy
|SIZES:
Short
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
EH26800OS also available in 28" waist in Small, Regular & Tall
|FABRIC:
65% polyester, 35% cotton canvas,
300g/m2
|WASHCARE:
D h H J U
|ADDITIONAL FEATURES:
• Back pockets
• Ruler pocket
YKK™
zip fly
Holster pockets
fit inside for
concealment
Adjustable
waistband
Holster pockets
CORDURA®
knee pad
pockets
CORDURA®
hem guards
Hammer loop
Cargo pocket
R Regular
FitEXPERT
Black
TROUSERS
Dickies 2019/2020 Workwear 097
TROUSERS&
SHORTS
096 Dickies 2019/2020 Workwear
50. |ED24/7 EVERYDAY TROUSERS
|SIZES:
Short
24 26 28 30 32 33 34 36 38 40 42 44 46 48 50
4 4 4 4 4 4 4 4 4 4 4
Regular
24 26 28 30 32 33 34 36 38 40 42 44 46 48 50
4 4 4 4 4 4 4 4 4 4 4 4 4
Tall
24 26 28 30 32 33 34 36 38 40 42 44 46 48 50
4 4 4 4 4 4 4 4 4 4 4 4
Hook &
loop fastening
cargo pocket
Hook &
loop fastening
cargo pocket
Bottom loading
knee pad pockets
Bottom loading
knee pad pockets
Button fastening
Button fastening
Two hip pockets Two hip pockets
|COLOURS:
Black/
Grey
Black/
Black
Khaki/
Black
Grey/
Black
Black/
Red
Black/
Yellow
Navy/
Grey
Navy/
Navy
Royal/
Navy
White/
Grey
Grey/
Orange
Black/
Lime
|EDCVCTRSR CVC TROUSERS
|COLOURS:
Black/
Grey
Black/
Black
Khaki/
Black
Grey/
Black
Black/
Red
|SIZES:
Regular
24 26 28 30 32 33 34 36 38 40 42 44 46 48 50
4 4 4 4 4 4 4 4 4 4 4 4 4
R Regular
Fit R Regular
Fit
COTTON
RICHCLASSIC CLASSIC
TROUSERS TROUSERS
|FABRIC:
65% polyester, 35% cotton, 240g/m2
|Washcare:
E H j K U
|ADDITIONAL FEATURES:
• Phone pocket
• Ruler pocket
• Two back pockets
|FABRIC:
60% cotton, 40% polyester, 260g/m2
|Washcare:
E H j K U
|ADDITIONAL FEATURES:
• Phone pocket
• Ruler pocket
• Two back pockets
Dickies 2019/2020 Workwear 099
TROUSERS&
SHORTS
098 Dickies 2019/2020 Workwear
51. CLASSIC CLASSIC
|WD884/WD88428/WD884OS Redhawk Super Work Trousers
Two
front pockets
Key fob
on waistband
External knee
pad pockets
Button and
YKK™
zip
fastening
|COLOURS:
Black Grey Navy
Khaki Olive
|FABRIC:
65%polyester,35%cotton,260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Two rear pockets with buttoned flap
closure
• Triple stitched seam detailing
• Hammer loop on right leg
• Ruler pocket on left leg
• Cargo style pocket with button
fastening
|WD814/WD814OS Redhawk Men’s Action Trousers
Zipped
pockets
External
knee pad
pockets
Button and
zip fastening
|COLOURS: |FABRIC:
65% polyester, 35% cotton, 260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Two zipped back pockets
• One zipped thigh pocket
Black Grey Navy
R Regular
Fit R Regular
Fit
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
WD88428 - Black, Navy & Grey also available in 28" waist
WD884OS - Black & Navy also available in 50" waist
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
WD814OS - Black & Navy also available in 28, 33, 50" Regular & 33" Tall
TROUSERS TROUSERS
Dickies 2019/2020 Workwear 101
TROUSERS&
SHORTS
100 Dickies 2019/2020 Workwear
52. |SIZES:
WD864R - Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
WD864T - Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4 4
|WD864R/WD864T Redhawk Trousers
Sewn-in
front crease
YKK™
zip front
|COLOURS:
Black Navy
|FABRIC:
65%polyester,35%cotton,260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• One buttoned back pocket
• Ruler pocket
TROUSERS
|WD803/WD803OS Redhawk chino Trousers
Two cargo
pockets with
flaps
|COLOURS: |FABRIC:
65% polyester, 35% cotton, 260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• One back jet pocket
• No exposed metal
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
WD803OS also available in 28" Short, Regular & Tall
Black Navy
TROUSERS
R Regular
Fit R Regular
FitCLASSIC CLASSIC
Dickies 2019/2020 Workwear 103
TROUSERS&
SHORTS
102 Dickies 2019/2020 Workwear
53. NEW
TROUSERS
|TR41500 REAPER Trousers
|Colours:
Green Navy
|Fabric:
65% polyester, 35% cotton canvas,
260g/m2
|Washcare:
E H h L U
|Additional Features:
• Two side pockets
• One inset back pocket with flap and
button fastening
Nylon zip, button
and bar fastening
Wide belt loops
Shirt gripper
waistband
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
R Regular
Fit EXPERT
Trousers
|COLOURS: |FABRIC:
Main - Black, Navy - 65% polyester,
35% cotton, 280g/m2
.
Main - Grey Melange - 85% cotton,
35% polyester, 280g/m2
.
Knee patch - twill fabric, 300D
|WASHCARE:
D H h K U
|ADDITIONAL FEATURES:
• Single top stitched back pocket
Black
|TR2008 JOGGERS
Two zipped
side pockets
Grey
Melange
Navy
Contrast knee
patch with
pleats
Elasticated
waistband
with drawcord
and eyelets
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4 4 4
CLASSIC FLEX
FABRIC
Dickies 2019/2020 Workwear 105
TROUSERS&
SHORTS
104 Dickies 2019/2020 Workwear
54. PREMIUM
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
JEANS
|DT1007 STANMORE JEANS
|COLOURS: |FABRIC:
100% cotton, 11½ oz
|Washcare:
D h H K V
|ADDITIONAL FEATURES:
• 5 pocket rinsed wash jean
Wide belt loops
with an extra
wide belt loop at
the back
Top loading
knee pad
pockets
YKK™
zip
Dark
Navy
Ruler pocket
on right leg
R Regular
Fit
Dickies 2019/2020 Workwear 107
TROUSERS&
SHORTS
106 Dickies 2019/2020 Workwear
55. L Loose
Fit
JEANS
|WD1000 BOSTON JEANS
Denim
Blue
|COLOURS: |FABRIC:
100% cotton, 12 oz
|Washcare:
C g H K U
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
YKK™
zip fly
with metal
button closure
5 pocket jean
JEANS
|WD1693 STONE WASHED WORK JEANS
Blue
|COLOURS: |FABRIC:
100% cotton, 13¾ oz
|Washcare:
E h H J V
|ADDITIONAL FEATURES:
• Riveted at stress points
Metal zip fly front
with metal button
closure
|SIZES:
Short
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4
Regular
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
Tall
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4
CLASSIC CLASSIC R Regular
Fit
Dickies 2019/2020 Workwear 109
TROUSERS&
SHORTS
108 Dickies 2019/2020 Workwear
56. |DP1006 Dickies Pro Shorts
|COLOURS:
Royal/
Black
Grey/
Black
Green/
Black
|SIZES:
40 42 44 46 48 50 52 54 56 58 60 62 64
4 4 4 4 4 4 4 4 4 4 4
|FABRIC:
65% polyester, 35% cotton ripstop,
270g/m2
|WASHCARE:
|ADDITIONAL FEATURES:
• Ergonomic fit
YKK™
zip fly
TenCate®
European
fabric stretch
back waistband
Hip pockets
Yellow/
Black
Black/
Grey
Reflective
detail
CORDURA®
reinforced
pockets
R Regular
Fit
SHORTS
FLEX
FABRICPREMIUM
UK SIZE
EQUIVALENT
IND SIZE
30R 44
32R 46
33R 48
34R 50
36R 52
38R 54
40R 56
42R 58
44R 60
46R 62
48R 64
Please note this chart shows the
closest Industry Range equivalent
to the UK size system.
Dickies 2019/2020 Workwear 111
TROUSERS&
SHORTS
110 Dickies 2019/2020 Workwear
57. NEW
|EH34001 Eisenhower Premium Shorts |EH26802 Eisenhower EXTREME Shorts
|COLOURS: |COLOURS:
Black Black Grey Navy
|Sizes:
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4
|Sizes:
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4
|FABRIC:
65% polyester, 35% cotton ripstop
with Teflon™
coating, 270g/m2
|Washcare:
D j H J U
|ADDITIONAL FEATURES:
• Water and stain repellent fabric
|FABRIC:
65% polyester, 35% cotton, 300g/m2
|Washcare:
D j H J U
|ADDITIONAL FEATURES:
• Back pockets
• Hammer loop
Contrast colour
CORDURA®
panels
Cargo
pocket with
mobile
phone
pocket
Zip off
holster pockets
2 hip pockets
Holster
pockets
Elasticated waist
Ruler
pocket
on right
leg
YKK™
zips
Button and
zip fastening
R Regular
Fit R Regular
FitPREMIUM PREMIUM
SHORTS SHORTS
WATER
REPELLENT
STAIN
RELEASE
Dickies 2019/2020 Workwear 113
TROUSERS&
SHORTS
112 Dickies 2019/2020 Workwear
58. NEW
|WD4979 GDT 210 SHORTS
|COLOURS:
Grey/
Black
Khaki/
Black
Navy/
Black
|FABRIC:
100% cotton, 210g/m2
|WASHCARE:
E H j L V
|ADDITIONAL FEATURES:
• Ruler pocket
• Welt pocket
YKK™
zip front
Cargo pocket
with mobile
phone pocket
Hammer loop
Side
elastication
|SIZES:
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
Triple stitch detail
using Coats®
thread
|WD4903 GDT PREMIUM ShortS
|COLOURS:
Black/
Grey
Grey/
Black
Stone/
Black
|Sizes:
Waist
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4
|FABRIC:
98% cotton, 2% elastane, 275g/m2
|Washcare:
E h H J V
|ADDITIONAL FEATURES:
• Reflective heat seal chevron
CORDURA®
cargo pocket
Hip pockets
Wide belt loops
Gusset at crotch
SHORTS SHORTS
R Regular
FitEXPERT 100%
COTTON R Regular
FitPREMIUM FLEX
FABRIC
COTTON
RICH
SOFT
TOUCH
FABRIC
Dickies 2019/2020 Workwear 115
TROUSERS&
SHORTS
114 Dickies 2019/2020 Workwear
59. |Sizes:
40 42 44 46 48 50 52 54 56 58 60 62 64
4 4 4 4 4 4 4 4 4 4 4
|IN30050 INDUSTRY TWO TONE WORK Shorts
Two side pockets
Side
elasticated waist
YKK™
branded zip
|COLOURS: |Fabric:
65% polyester, 35% cotton, 300g/m2
|Washcare:
E H j J T
|ADDITIONAL FEATURES:
• Two back pockets with flaps
• 68 bartacks
Grey/
Black
Black/
Black
Green/
Black
Two cargo
pockets
with
mobile
phone
pocket on
right leg
R Regular
FitEXPERT
SHORTS
CLASSIC
|ED24/7SH EVERYDAY SHORTS
|COLOURS: |FABRIC:
65% polyester, 35% cotton, 240g/m2
|Washcare:
E H j K U
|ADDITIONAL FEATURES:
• Two back pockets
Hook &
loop
fastening
cargo
pocket
with
integrated
mobile
phone
pocket
Ruler
pocket on
right leg
Two hip
pockets
Button
fastening
Black/
Grey
Black/
Black
Khaki/
Black
Grey/
Black
Black/
Red
Black/
Yellow
Navy/
Grey
Navy/
Navy
Royal/
Navy
White/
Grey
Grey/
Orange
Black/
Lime
|SIZES:
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4 4
SHORTS
UK SIZE
EQUIVALENT
IND SIZE
30R 44
32R 46
33R 48
34R 50
36R 52
38R 54
40R 56
42R 58
44R 60
46R 62
48R 64
Please note this chart shows the
closest Industry Range equivalent
to the UK size system.
R Regular
Fit
Dickies 2019/2020 Workwear 117
TROUSERS&
SHORTS
116 Dickies 2019/2020 Workwear
60. |WD802 Redhawk Pro ShortS
Holster
pockets
Cargo
pocket
Button and
zip fastening
Ruler
pocket
|COLOURS: |FABRIC:
65%polyester,35%cotton,260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Back pockets
• Triple stitched detailing
|SIZES:
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
Black Grey Navy
|WD834 Redhawk Cargo Shorts
Two side
pockets
Key fob on
waistband
Cargo style
pockets on
each leg
with hook
& loop
fastened
flaps, one
with mobile
phone
pocket
|COLOURS: |FABRIC:
65% polyester, 35% cotton, 260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Key fob on waistband
• Two side pockets
• Stud front closure to waistband
• Two rear pockets with flaps and
hook & loop closure
|SIZES:
28 30 32 33 34 36 38 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
Black Khaki Olive Navy
Stud front
closure to
waistband
R Regular
Fit R Regular
FitEXPERT CLASSIC
SHORTS SHORTS
Dickies 2019/2020 Workwear 119
TROUSERS&
SHORTS
118 Dickies 2019/2020 Workwear
62. Dickies 2018/19 Workwear 123
WD2360R DICKIES LINED COVERALL
Page 124
WD4879R/WD4879T DICKIES DELUXE
COVERALL
Page 125
WD2299SHORTSLEEVECOTTONCOVERALL
Page 126
WD2279 COTTON COVERALL
WD2279LWLIGHTWEIGHTCOTTONCOVERALL
Page 127
WD4819 Redhawk Economy Stud
Front Coverall
Page 128
WD4829 Redhawk Stud Front
Coverall
Page 129
WD4839 Redhawk Zip Front Coverall
Page 130
WD4839J Redhawk Junior Zip Front
Coverall
Page 131
IN30040 INDUSTRY TWO TONE
Bib and Brace
Page 134
WD600 REDHAWK BIB AND BRACE
Page 136
WD650 PAINTERS BIB AND BRACE
Page 137
WP15000 DICKIES WATERPROOF
PADDED COVERALL
Page 133
WD4920 GDT 290 COVERALL
Page 132
FR24/7A FR Everyday Coverall
Page 140
FR24/7TPA FR Everyday
Coverall With Tape
Page 141
ED24/7BB Everyday Bib and Brace
Page 135
COVERALLS, FR & BIB AND BRACES
Our iconic coveralls are some of our most popular items, and it’s easy to see why. Highly durable, with an abundance of features
including multiple pockets, fasteners and an elasticated back, it’s the ultimate in workwear. We also offer flame retardant and hi-vis
options as well as bib and brace dungarees.
FR5402 Pyrovatex®
Coverall
Page 142
FR5401 Lightweight Pyrovatex®
Coverall
Page 143
Dickies 2019/2020 Workwear 123122 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
63. LINING
coveralls
|WD2360R DICKIES LINED COVERALL
|COLOURS: |FABRIC:
65%polyester,35%cotton,260g/m2
Lining-80%polyester,20%cotton,
140g/m2
Padding-100%polyester.
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Two back pockets, one zipped
• Reinforced stress points
• Action back allowing maximum body
movement
• Side pockets lined with sail
cloth for side access
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4
Navy
Concealed heavy
duty two way
brass zip
Zipped chest
pockets
Stud
adjustment
cuffs
Side pockets
Hammer loop
Side
elastication
with tunnel
waistband
coveralls
|WD4879R/WD4879T DICKIES DELUXE COVERALL
|COLOURS: |Fabric:
65% polyester, 35% cotton, 280g/m2
with Teflon™
coating
|Washcare:
E h H K U
|ADDITIONAL FEATURES:
• Reinforced stress points
• Action back
• Two mitred back pockets, one zipped
• Pencil pocket
• Side pockets lined with sail
cloth for side access
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4
Navy
Concealed heavy
duty two way
YKK™
brass zip
Two zipped
chest pockets
Reinforced
turnback
cuffs with
stud closure
Side pockets
Hammer loop
on left leg
Royal
STAIN
RELEASEPREMIUMPREMIUM
Studded
neck closure
Side elasticated
with tunnel
waistband
Dickies 2019/2020 Workwear 125124 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
64. LIGHTWEIGHT Cotton COVERALL ONLY
100%
COTTON
100%
COTTON
coveralls
|WD2279 & WD2279LW COTTON COVERALL & LIGHTWEIGHT COTTON COVERALL
|COLOURS: |Fabric:
100% cotton,
Cotton Coverall - 260g/m2
Lightweight Cotton Coverall - 170g/m2
|Washcare:
D h H K U
|ADDITIONAL FEATURES:
• Lightweight fabric - Lightweight
Cotton Coverall
• Reflective tape
• Two slanted chest pockets with
nylon zips on front, two back pockets
• Tool and ruler pockets
• Action back - Cotton Coverall
|Sizes:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4 4 4
Navy Red Orange Royal -
Lightweight
ONLY
Hammer loop
Two slanted chest
pockets with
nylon zips on
front, two back
pockets
Reflective tape
coveralls
|WD2299 SHORT SLEEVE COTTON COVERALL
|COLOURS: |Fabric:
100% cotton, 170g/m2
|Washcare:
D h H J U
|ADDITIONAL FEATURES:
• Two back pockets (one with button
closing)
• Side swing & access pockets
• Action back
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4 4 4
Royal Navy Khaki
Concealed two
way nylon zip
Two front pockets
Side elastication
with tunnel waist band
EXPERT EXPERT LIGHT
WEIGHT
Dickies 2019/2020 Workwear 127126 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
65. Arm pocket
|WD4819r/WD4819t Redhawk Economy Stud Front Coverall
Chest pockets Chest pockets
Arm pocket
Knee pad pockets Knee pad pockets
Elasticated
waistband Elasticated
waistband
Hip pockets
Hip pockets
Concealed
stud front
Concealed
stud front
|COLOURS: |FABRIC:
65%polyester,35%cotton,200g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Back pocket
• Ruler pocket
Lincoln
Green
Black
Royal
White
Navy
|Sizes:
WD4819R - Regular & WD4819T - Tall
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4
WD4819T - Tall - Navy only
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4
|WD4829 Redhawk Stud front Coverall
|COLOURS: |Fabric:
65%polyester,35%cotton,260g/m2
|Washcare:
E h H J U
|ADDITIONAL FEATURES:
• Back pocket
• Ruler pocket
|Sizes:
Regular
36 38 40 42 44 46 48 50 52 54 56 58 60
4 4 4 4 4 4 4 4 4 4
Tall - Navy only
36 38 40 42 44 46 48 50 52 54 56 58 60
4 4 4 4 4 4 4 4 4 4
Lincoln
Green
Royal Navy
EXPERT EXPERTLIGHT
WEIGHT
coverallscoveralls
Dickies 2019/2020 Workwear 129128 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
66. |WD4839 Redhawk Zip Front Coverall
Double
pencil pocket
on sleeve
Knee pad pockets
Two way
metal zip
front with
studded over
placket
Two swing
pockets
with side
access
Two zipped
chest pockets
|COLOURS: |FABRIC:
65%polyester,35%cotton,260g/m2
|WASHCARE:
E h H J U
|ADDITIONAL FEATURES:
• Tool pocket and ruler pocket
• Full back elastication and an action
back
• Two large back patch pockets, one
zipped
Black Grey
WhiteLincoln
Green
Bottle
Green
RoyalRed Orange
Navy
|WD4839J Redhawk Junior Zip Front Coverall
Two zipped
chest pockets
Pencil pocket
on left sleeve
Two swing pockets
with side access
Two way metal
zip front with
studded over
placket
Elasticated waistband
|COLOURS: |Fabric:
65%polyester,35%cotton,260g/m2
|Washcare:
E h H J U
|ADDITIONAL FEATURES:
• Ruler pocket on right leg
• Full back elastication and an action
back
• Two large back patch pockets, one
zipped
|Sizes:
24 26 28 30 32 34
4 4 4 4 4 4
Royal
EXPERT EXPERT
|SIZES:
Regular - All colours
36 38 40 42 44 46 48 50 52 54 56 58 60
4 4 4 4 4 4 4 4 4 4
Regular - Navy
36 38 40 42 44 46 48 50 52 54 56 58 60
4 4 4 4 4 4 4 4 4 4 4 4
Tall-AllcoloursexceptBottleGreen&Orange-Navy&Royalonlycoloursavailablein56-60
36 38 40 42 44 46 48 50 52 54 56 58 60
4 4 4 4 4 4 4 4 4 4 4 4 4
coverallscoveralls
Dickies 2019/2020 Workwear 131130 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
67. |WP15000 WATERPROOF PADDED COVERALL|WD4920 GDT 290 COVERALL
|COLOURS:|COLOURS: |FABRIC:
100% Polyester Oxford with clear PU
coating, 110g/m2
Lining - 100% polyester taffeta,
55g/m2
Padding - 100% polyester.
|Washcare:
C H g K U
|ADDITIONAL FEATURES:
• Back pockets
• Hem storm flap
• Ruler pocket
• Taped seams
|FABRIC:
100% cotton, 290g/m2
|Washcare:
E H j L V
|ADDITIONAL FEATURES:
• Elasticated waistband at back
• Ruler pocket
BlackGrey/
Black
Navy Green
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4 4 4 4
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4 4
Chest pockets
One
chest pocket
Adjustable hem
Adjustable
cuffsAdjustable
cuffs with
hook and
loop fastening
Adjustable hood
Elasticated
waistband
Two full length
YKK™
zips
High visibility
reflective tape
Cargo pocket
Storm flapOne mobile
phone pocket
Waterproof fabric
to 1000mm
Zipped front
Two lower
double
pockets
with access to
under-
garments
PREMIUMPREMIUM
WATER
PROOF
1000mm
coverallscoveralls
ENHANCED
REFLECTIVITY
100%
COTTON
PADDING
Dickies 2019/2020 Workwear 133132 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
68. |SIZES:
Short
24 25 26 27 28 29 30 31 32 33 34
4 4 4 4 4 4
Regular
44 46 48 50 52 54 56 58 60 62 64
4 4 4 4 4 4 4 4 4 4 4
Tall
90 94 98 102 106 110 114 118 122 126 130
4 4 4 4 4 4
|IN30040 INDUSTRY TWO TONE Bib and Brace
|COLOURS: |Fabric:
65% polyester, 35% cotton, 300g/m2
|WASHCARE:
E H j J T
|ADDITIONAL FEATURES:
• Hammer loop
• Double ruler pocket
• Elasticated waist at back
• Two back pockets with bellow
• YKK™
branded zip
• 86 bartacks
Button adjustable waist
Grey/
Black
External
knee pad pocket
Two cargo pockets,
with mobile phone
pocket to the right
Two side pockets
Royal/
Navy
Black/
Black
Green/
Black
Navy/
Royal
|ED24/7BB EVERYDAY BIB AND BRACE
|COLOURS: |FABRIC:
65% polyester 35% cotton, 240g/m2
|Washcare:
E H j K U
|ADDITIONAL FEATURES:
• Elasticated back
• Back pockets
Hip pockets
Adjustable straps
Ruler pocket
Bottom loading
knee pad pockets
Chest pocket
|SIZES:
Regular
28 30 32 33 34 36 38 39 40 42 44 46 48 50 52
4 4 4 4 4 4 4 4 4 4 4
Phone pocket
Black/
Grey
Black/
Black
Khaki/
Black
Black/
Yellow
Black/
Red
Navy/
Grey
Navy/
Navy
White/
Grey
Grey/
Black
Grey/
Orange
Black/
Lime
Royal/
Navy
EXPERT
Button adjustable waist
coverallscoveralls
UK SIZE
EQUIVALENT
IND SIZE
34S 24
36S 25
38S 26
40S 27
42S 28
44S 29
26R 40
28R 42
30R 44
32R 46
33R 48
34R 50
36R 52
38R 54
40R 56
42R 58
44R 60
46R 62
30R 64
30T 90
32T 94
33T 98
34T 102
36T 106
38T 110
Please note this chart shows the
closest Industry Range equivalent
to the UK size system.
Dickies 2019/2020 Workwear 135134 Dickies 2019/2020 Workwear
CLASSIC
COVERALLS,FR&
BIBANDBRACES
69. |COLOURS: |FABRIC:
65% polyester, 35% cotton, 260g/m2
|WASHCARE:
E H h J U
|ADDITIONAL FEATURES:
• Back pocket
• Ruler pocket
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4
Leg Regular 31"
Bib pocket
with zip fastening
|WD600 REDHAWK BIB AND BRACE
Navy
Two front
opening hip pockets
with side access
YKK™
zip fly front
EXPERT EXPERT
coverallscoveralls
100%
COTTON
|WD650 PAINTERS BIB AND BRACE
|COLOURS:
White
|SIZES:
XS S M L XL 2XL 3XL 4XL
4 4 4 4 4
Deep front
pouch pocket
|FABRIC:
100% cotton, 245g/m2
|WASHCARE:
D h H J U
|ADDITIONAL FEATURES:
• One back patch pocket
• Ruler pocket
Angled chest pocket
Adjustable straps
with snap fasteners
Knee pad pouches to
fit Dickies knee pads
Dickies 2019/2020 Workwear 137136 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES
70. HEATANDFLAMEPROTECTIONGUIDE
SYMBOLGUIDE
MadetoOrder(MTO)
Our Made to Order (MTO) products are available for quantities greater than 500 pieces.
In addition to our catalogue MTO’s customer bespoke products can also be designed and produced for
corporate clients.
ENISO11612
Protective clothing for workers exposed to heat and flames (not including Welders and
Fire Fighters).
The standard specifies the performance requirements for garments which protect the body from heat and
flame.
ENISO11611
Protective clothing for use in welding and allied processes.
The standard specifies 2 classes with specific performance requirements:
Class 1 lower level: less hazardous welding situations.
Class 2 higher level: more hazardous welding situations.
EN1149-5
Protective clothing – electrostatic properties.
Antistatic PPE are certified to EN 1149-5:2008 as this standard covers the performance requirements and
refers to the choice of 2 different test methods (EN 1149-1 or EN 1149-3).
ENISO13758-2:2003(UPF40+)
Textiles - Solar UV protective properties.
Describes the classification and marking of sun-protective clothing. An Ultraviolet Protection Factor (UPF) shows how much solar ultraviolet radiation (UVR) is reduced when passing
through fabric of clothing. It is similar to the sun protection factor (SPF) used for sunscreens.
Suitable for industrial laundery at 75°C
Suitable for domestic laundry
GENERAL
A user guide is included with all our garments. We recommend that this be read carefully as the guide gives important information about the protection the
garment provides along with wash care instructions and important information that contributes to optimal protection for the wearer. Jacket and Trousers
should always be worn together as an ensemble to ensure maximum protection.
ISO standards are under constant revision and our designs are regularly revised and updated to ensure compliance to the latest standards. Dickies also
manufacture garments to comply with many different International Safety Standard requirements such as NFPA and others upon request.
Most of our garments can be customised with your corporate badges and logo’s. We can also accommodate requirements for bespoke customised garment
design requests from our larger customers ensuring a unique corporate identity.
Please contact us for more details.
PYROVATEX®
Cotton fibres treated with a crosslink resin utilising the heat-cured dialkylphosphonamide process that forms a bond on the molecular level to the cellulose in
the cotton fibres. This creates a very strong, durable and protective link that makes the fabric resistant to shrinking or melting when exposed to heat and flame.
Our Pyrovatex®
fabrics are made from high quality cotton fibres, consequently they are lightweight and comfortable with excellent durability to wash and wear,
ensuring Dickies Workwear a long lifetime.
LAUNDRYCARE
Flame retardant clothing should be laundered strictly in adherence with the instructions on the care label in every garment, if in any doubt please consult with
Dickies as to how to best care for your workwear. Poor laundry care can have a serious adverse effect on a safety garment. For example water which is too hard
affects the cleaning process and may contain mineral salts to build up on the fabric, deposits of this type can adversely affect the FR properties of the clothing
and in extreme cases of build-up can actually exacerbate the flammability of the clothing and act as an accelerant if exposed to an ignition source.
cotton, Aramid and Modacrylic garments can be laundered using the recommended temperatures and wash cycles. Some 3% minimal shrinkage can be expected
and is a natural reaction from both the fibres and the weave construction, most noticeable during the first 3 to 5 washes. Please be careful not to “over dry”
garments. Dickies recommend that this is taken into consideration when selecting your preferred garment. Exposure to excessive drying temperatures will
result in higher than normal shrinkage. Starches, fabric softeners, and other laundry additives should be avoided.
DO NOT USE CHLORINE BLEACH OR OTHER DETERGENTS OR CHEMICALS CONTAINING HYDROGEN PEROXIDE.
1
2
3
4
5
6
7
8
j
EN ISO
11612
EN ISO
11611
EN 1149-5
All Dickies flame retardant products are certified and tested by BTTG™.
With almost a century’s experience in textiles and related products, BTTG™ is
the leading independent organisation for the testing & certification of Personal
Protective Equipment and Construction Products.
EN13758-2
40+
Dickies 2019/2020 Workwear 139138 Dickies 2019/2020 Workwear
COVERALLS,FR&
BIBANDBRACES