Offering a wide range of Industrial and Engineering products such as Gasket, Spiral Wound Gasket, PTFE Products, PTFE Products, Asbestos Products, Non-asbestos Products, Packing Sheets, Jointing Sheets, Graphite Products, Rubber Products, Insulation Products, Sealing Products and others.
Get more details visit us : http://www.gasket.net.in/
Epoxy covering is the application of extra shielding echelon to floorboards. There are different sorts of covering like epoxy covering, cement covering, elastomeric covering, etc. are available that you to apply on your floor
Epoxy covering is the application of extra shielding echelon to floorboards. There are different sorts of covering like epoxy covering, cement covering, elastomeric covering, etc. are available that you to apply on your floor. There are different sorts of coverage that are appropriate for various aims such as floor covering, wall or roof.
Where Can I Get Best Industrial Epoxy Floors Detroitariaemily
Floors play an important role in the interior beauty of your building no matter whether it is industrial or commercial building. The industrial epoxy floors Detroit is beautiful, seamless and hygienic protects from bacteria
Chitra Insultec Pvt. Ltd. is an ISO 9001:2015certified organization engaged in manufacturing and of Construction Chemicals ,Protective Wall-Terrace Coatings, Waterproofing,Tile adhesives, Plasticizers, water repellents,wood primer etc.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
Offering a wide range of Industrial and Engineering products such as Gasket, Spiral Wound Gasket, PTFE Products, PTFE Products, Asbestos Products, Non-asbestos Products, Packing Sheets, Jointing Sheets, Graphite Products, Rubber Products, Insulation Products, Sealing Products and others.
Get more details visit us : http://www.gasket.net.in/
Epoxy covering is the application of extra shielding echelon to floorboards. There are different sorts of covering like epoxy covering, cement covering, elastomeric covering, etc. are available that you to apply on your floor
Epoxy covering is the application of extra shielding echelon to floorboards. There are different sorts of covering like epoxy covering, cement covering, elastomeric covering, etc. are available that you to apply on your floor. There are different sorts of coverage that are appropriate for various aims such as floor covering, wall or roof.
Where Can I Get Best Industrial Epoxy Floors Detroitariaemily
Floors play an important role in the interior beauty of your building no matter whether it is industrial or commercial building. The industrial epoxy floors Detroit is beautiful, seamless and hygienic protects from bacteria
Chitra Insultec Pvt. Ltd. is an ISO 9001:2015certified organization engaged in manufacturing and of Construction Chemicals ,Protective Wall-Terrace Coatings, Waterproofing,Tile adhesives, Plasticizers, water repellents,wood primer etc.
http://marispolymers.com/products/waterproofing-systems/inverted-flat-roof-waterproofing/
Inverted flat roof waterproofing combined with a thermal insulation is essential for a buildings waterproofing and energy saving thermal insulation. The MARISEAL SYSTEM® inverted flat roof waterproofing method offers a simple build-up waterproofing, that features a protected waterproofing membrane and loose laying insulation boards.
The inverted waterproofing insulation system is applicable for all types of flat roofs, as it offers an efficient solution for new construction but also for renovation of old flat roofs as is it possible to install an inverted roof over an existing roof build up.
OTR Wheel Engineering and all of its associated divisions are recognized as being the largest supplier of foam filled tire/wheel assemblies in United States by volume of foam pumped annually. A big part of OTR Wheel Engineering’s business is being a major supplier of mounted tire/wheel assemblies to Original Equipment Manufacturers (OEM’s) that manufacture rubber tired equipment. Many of the OEM’s that we service either build equipment or have customers that demand foam filled tires.
Industrial epoxy floors michigan are the bestariaemily
For instance, there are quite a number of workers who move from one location to the other as they perform their various duties. In some cases, there are various spillages here and there. This can make surfaces quite unpleasant if the right flooring system was not considered.
Here, there and Everywhere "ADHERE"-Nothing else comes near manufacturing advance Construction Chemicals and Decorative Coatings having a proven track records over a two decade, with unmatchable uniqueness of its own."ADHERE BONDS"
At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
http://www.rubberflooringuk.com Classico Rubber Gym Flooring is extremely wear resistant so well suited to areas where there is heavy footfall for example stadiums. Heavy Duty Rubber Gym Mats Also Reduce Noise From Heavy Foot Movement and are specially suited for Weight Lifting, Dumblles Etc. They are also ideal for putting beneath exercise machines to absorb noise and vibration.
Have you ever wondered exactly what Sika does? With so many different products in different market sectors, we have a wide range of solutions for construction and industry. This presentation gives a good overview of our business and our market sectors - roofing, flooring, sealing and bonding, automotive, waterproofing, concrete, refurbishment, and industry.
Ecotile Flooring Ltd manufacture PVC interlocking floor tiles that can be loose laid over any hard surface with minimal preparation. No downtime. ESD version available.
Responsive industries is worlds one of the best floors manufacture company. We provide pvc flooring, vinyl flooring, leather cloth, Artificial Leather, Commercial Vinyl Flooring, PVC Leather.
Flotex combina la funcionalidad de un pavimento flexible con las propiedades antideslizantes y acústicas normalmente asociadas a las moquetas. Flotex es un pavimento higiénico y resistente, 100% impermeable; el único pavimento textil realmente lavable.
Flotex ofrece un pavimento cálido, confortable e higiénico, adecuado para todo tipo de aplicaciones comerciales. Gracias al efectivo tratamiento antimicrobiano Sanitized®, Flotex garantiza una protección constante frente a las bacterias y el desarrollo de los ácaros del polvo.
http://bit.ly/1HbPqLo
OTR Wheel Engineering and all of its associated divisions are recognized as being the largest supplier of foam filled tire/wheel assemblies in United States by volume of foam pumped annually. A big part of OTR Wheel Engineering’s business is being a major supplier of mounted tire/wheel assemblies to Original Equipment Manufacturers (OEM’s) that manufacture rubber tired equipment. Many of the OEM’s that we service either build equipment or have customers that demand foam filled tires.
Industrial epoxy floors michigan are the bestariaemily
For instance, there are quite a number of workers who move from one location to the other as they perform their various duties. In some cases, there are various spillages here and there. This can make surfaces quite unpleasant if the right flooring system was not considered.
Here, there and Everywhere "ADHERE"-Nothing else comes near manufacturing advance Construction Chemicals and Decorative Coatings having a proven track records over a two decade, with unmatchable uniqueness of its own."ADHERE BONDS"
At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
At Shivam Enterprises, we ensure 100% customer satisfaction to our customers with our expertise in delivering good quality products. We specializes in manufacturing tile Adhesive, tile mate products, Grouts, Epoxy, Wall putty, AAC BLOCK ADHESIVE, Floor hardener etc.
http://www.rubberflooringuk.com Classico Rubber Gym Flooring is extremely wear resistant so well suited to areas where there is heavy footfall for example stadiums. Heavy Duty Rubber Gym Mats Also Reduce Noise From Heavy Foot Movement and are specially suited for Weight Lifting, Dumblles Etc. They are also ideal for putting beneath exercise machines to absorb noise and vibration.
Have you ever wondered exactly what Sika does? With so many different products in different market sectors, we have a wide range of solutions for construction and industry. This presentation gives a good overview of our business and our market sectors - roofing, flooring, sealing and bonding, automotive, waterproofing, concrete, refurbishment, and industry.
Ecotile Flooring Ltd manufacture PVC interlocking floor tiles that can be loose laid over any hard surface with minimal preparation. No downtime. ESD version available.
Responsive industries is worlds one of the best floors manufacture company. We provide pvc flooring, vinyl flooring, leather cloth, Artificial Leather, Commercial Vinyl Flooring, PVC Leather.
Flotex combina la funcionalidad de un pavimento flexible con las propiedades antideslizantes y acústicas normalmente asociadas a las moquetas. Flotex es un pavimento higiénico y resistente, 100% impermeable; el único pavimento textil realmente lavable.
Flotex ofrece un pavimento cálido, confortable e higiénico, adecuado para todo tipo de aplicaciones comerciales. Gracias al efectivo tratamiento antimicrobiano Sanitized®, Flotex garantiza una protección constante frente a las bacterias y el desarrollo de los ácaros del polvo.
http://bit.ly/1HbPqLo
El pavimento seleccionado para las zonas de acceso juega un papel fundamental en el diseño de los edificios modernos: minimiza los costes de mantenimiento, conserva el aspecto del edificio a lo largo del día y evita la entrada de suciedad y otros contaminantes.
Además, se trata del primer contacto con el cliente. Con sus pavimentos textiles (Coral) y rígidos (Nuway) para zonas de acceso, Forbo Flooring ofrece una gran variedad de soluciones para cada situación.
http://bit.ly/1HLYog0
(https://www.monoplastics.com/) We are amongst the prominent manufacturers and Suppliers of the wide assortment of Poly and HDPE Sheet. These are used by the clients for their perfect performance and lightweight.
(www.monoplastics.com) We are amongst the prominent manufacturers and Suppliers of the wide assortment of Poly and HDPE Sheet. These are used by the clients for their perfect performance and lightweight.
Octopus tile adhesive is a high-performance tile adhesive brand by KABANI Group. Octopus Presents 5 types of adhesive products that is ideal for both interior and exterior tiling applications. It is easy to use and provides a strong, durable bond that is resistant to moisture, water, and most chemicals. If you are looking for a high-quality tile adhesive, then Octopus Tile Adhesive is the perfect choice. Octopus is certified by ANSI: A118.4 ET, EN: 12004/ ISO 13007: C2TES1, IS 15477: 2019: TYPE 2 TS 1 certifications. Our products are designed to be easy to use, providing strong adhesion and long-lasting results.
El sistema Colorex
Colorex se puede utilizar en cualquier sitio. Puede instalarse encolándolo directamente sobre el hormigón, como parte de un sistema de suelos practicables o como sistema de loseta autoportante. Todas las versiones están disponibles en dos niveles de conductividad: EC Alta Exigencia y SD Exigencia Media.
Además, la versión en loseta autoportante se ofrece también en una versión antiestática (Basic plus) y con resistencia al deslizamiento (R11 plus) con el fin de completar la oferta de soluciones de alta tecnología. Colorex EC es apto para salas blancas, laboratorios farmacéuticos, centros de producción y quirófanos.
http://bit.ly/1QrVuBH
EVEREST COMPOSITES PVT. LTD. is fast growing company with a strong technology base in the Composite area of fibre reinforced plastics. Since 1991, our company rapidly became leader in the development and manufacture of quality FRP, GRC, & PUF Panel Products in India.
Over 20 years of expertise in this field, we have built a clientele that associates reliable and best quality products with EVEREST.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
3. Solving your flooring
problems.
Ecotile is a privately owned manufacturing company founded
in 1996. We produce premium, durable PVC flooring suitable
forindustrialuse.Wehaveprovidedbespokeflooringsolutions
to hundreds of leading businesses worldwide. Our ISO9001
& ISO14001 certifications validate our commitment to our
customers and our continual improvement.
Ecotile pride ourselves on
working in partnership with
customers who value the highest
levels of service, quality, safety
and technical expertise. With
a never ending commitment
towards solving every flooring
problem, we can ensure that
the highest quality standards are
achieved 100% of the time.
With offices and distribution
channels all over the world, we
are able to provide any business
or consumer with safe, durable
PVC flooring.
“AtEcotilewecontinuallyinvestin
internationaltesting,certification
and approval processes in order
to provide total confidence to
our customers. In parallel, we
frequently work with customers
to resolve legacy issues that
they have experienced with an
inappropriate flooring system.”
- James Gedye, CEO & Founder
4. Celebrating 20 Years
1996 James Gedye sets up Ecotile
Flooring Ltd from the bedroom of
his home in a quiet suburb of North
London.
1998 We move into our very first
industrial premises; a small factory
and office in Barnet, Hertfordshire
2001 Weopenanewmanufacturing
facility in North Yorkshire & we
employ Lucinda O’Reilly straight
from university who promptly
secures us our first ever six figure
order from Plysu Manufacturing.
2005 After winning our first
export order from Multimedia
Fibre Networks Data Centre in
Amsterdam & becoming the
preferred floor supplier of Robert
Bosch, we open a new warehouse
and office facility in Potters Bar,
Hertfordshire.
2006 We win our largest ever
contract to fit a warehouse and
logistic centre for Scottish &
Southern Energy’s (SSE) new
southern regional HQ
2009 Michael Ollivere, a highly
qualified injection mouldings and
plastics expert joins the team and
begins work on a new factory.
2013 Lucinda O’Reilly and Michael
Ollivere are both appointed
directors. We doubled in size since
the opening of the new factory in
2009.
2009 The machinery and technical
aspects of the factory are fine-tuned
as James and Michael turn a dream
into a reality and open the Ecotile
Factory.
5. 2015 International sales account
for over 40% of turnover for the
first time.
2016 We celebrate our 20 Year
anniversary.
2017 We open a new warehouse
in Europe, & a new sales office in
Dubai to extend our reach even
further.
2017 We launch a new product range
that allows us to provide outdoor
flooring solutions suitable for events,
sports courts and wet areas.
2017 We’re awarded TWO Queen’s
Awards for Enterprise (The most
prestigious business award in
the UK) in recognition of our
achievements in Innovation and
our contribution to International
Trade.
2017 To meet growing demand, we
expand our manufacturing capability
with the addition of another injection
moulding machine.
6. Our Vision:
To be the largest interlocking floor tile manufacturer in the world; a
company recognised for quality, reliability and service.
The key driving forces behind Ecotile Flooring:
01 Being operationally excellent & efficient in everything we do
02 Maximising every opportunity
03 Achieving & maintaining the highest quality standards
04 Encouraging innovation & empowering our team
05 Making work & employment rewarding, interesting & valued
06 Providing solutions to flooring problems large & small
7. For us, being green is
standard practice.
We understand that many industrial practices have a negative
impactontheworldaroundusandthatthisisagrowingconcern
withconsumers.Itisbecauseofthisthatourambitiontocreate
a zero waste policy has been at the heart of our business for
many years. Ecotile is an ISO 14001 certified company with an
ongoing environmental management system.
Unlike most traditional flooring,
Ecotile is 100% recyclable. At the
end of their life-span tiles can
be granulated and re-used to
manufacture more tiles.
As an environmentally responsible
company we will arrange to collect
any excess material, old tiles or off-
cuts completely free of charge.
We use a unique manufacturing
process that allows us to optimise
the use of recycled material and
significantly reduce the energy
required to produce tiles. The
twin shot injection moulding
process requires far less energy
than traditional injection moulding
processes.
What About VOCs?
Volatile Organic Compounds or
VOCs are organic chemicals that
have a high vapour pressure at
room temperature. This causes
molecules to evaporate or separate
from the solid compound and enter
the surrounding air. This can be
toxic.
Volatile Organic Compounds are
something we take very seriously
here at Ecotile, and whilst trace
elements are unavoidable from
modifiers and non PVC based
additives, we work hard to ensure
our VOC levels are significantly
less than any other resin based or
conventional flooring systems.
8. We have created simple and reliable
solutions for both commercial and
heavy industrial envrionments.
9. E500/5 A light duty tile
Ecotile 500/5 is the entry level version of the Ecotile
floor range. The thinnest of our tiles (5mm), designed for
commercial, domestic and light industrial applications.
The tiles are quick and simple to install over any hard
surface to create a tough and hardwearing floor that will
help to reduce dust and noise and improve the appearance
of your facility.
The E500/5 is only suitable for foot traffic and will not be
able to withstand vehicle traffic (over 350 kg) or heavy
impact.
10. E500/6 The hidden joint tile for commerce
The Ecotile 500/6 has a hidden joint with a push fit seam
and bevelled edge. The tile gives a similar appearance to
a traditional vinyl finish. The 6mm tile was designed to
provide an alternative for customers who do not want or
like the visible open joint design.
The hidden dovetail joint offers better protection to water
ingress and is therefore more popular within shops,
commerce and similar environments. This tile is not
recommended in high traffic or industrial areas.
12. E500/7 The original interlocking tile
Ecotile 500/7 is the original loose lay interlocking floor tile.
It is 7mm thick with an open joint dovetail design. Ideal for
the vast majority of applications, Ecotile 500/7 is a heavy
duty floor covering that can withstand high point loading,
impact and vibration. Suitable for vehicle traffic including
fork lift trucks (as a guide up to 3.5 ton unladen weight).
In addition, The E500/7 offers good thermal and
acoustic insulation and excellent resistance to impact
and vibration. It is most popular in warehouses, factories
and garages.
14. E500/10 The ultra heavy duty tile
The ultra-heavy duty interlocking floor tile is exceptionally
tough, resistant to impact, heavy loads and high traffic
movements. E500/10 is the highest specification tile we
produce. As with the entire range, it is designed to be
loose laid and quick and simple to install.
Ecotile 500/10 can be used to repair and protect existing
busy warehouse and factory floors where access time is
limited.
The 10mm tile has been used in aircraft hangars, fire
stations, passenger terminals & engineering plants.
16. ESD conductive or dissipative floor tiles
Ecotile ESD floor tiles are a static dissipative or
conductive flooring system designed for use in areas where
components or individuals need to be protected from the
risk of electrostatic damage. This includes electronic
sub-assembly areas or facilities where combustible/
explosive materials are handled, typically in an industrial
or manufacturing environment.
The conductive properties of ecotile ESD floors will last
for the lifetime of the tile and if grounded and maintained
in accordance with our instructions the tiles will create
a safe conductive floor surface that can be used as your
primary ground.
BS EN 61340-5 / IEC 61340 Approved.
18. Floor signs and logos.
Add impact to your floor by incorporating permanent floor
markings. Ecotile Flooring are able to incorporate almost
any logo or image into your floor to create a permanent
and highly visual sign or message. The logo tiles are
manufactured by a CNC water laser jet machine which
ensures a clean and precise cut.
Statutory Health and Safety Regulations require every
company to display the appropriate health and safety signs
throughout the workplace. We are able to manufacture the
full range of warning signs (black & yellow), prohibitory
signs (red & white) and mandatory signs (blue and white).
19. How is the E500 range
made?
EachEcotileisinjectionmouldedusingeithervirginorrecycled
material depending on the product. All recycled material
is strictly controlled and graded. The recycled material we
use has a lower filler content (fillers are particles added to
material) than the virgin material used by our competitors.
Therefore our tiles are more durable, less likely to mark or
scuff, and are guaranteed not to warp or deform.
Most floor coverings only have a
limited life span due to wear or are
scrapped for refurbishment. The
majority of waste floor coverings
will end up in landfill causing
contamination and damage to the
environment.
This is because once a floor has
been adhered to the floor, it cannot
be re-used. Not only can our tiles
be recycled, there is also a strong
market for pre-owned tiles, so you
can rest assured that when the
time comes to replace your floor it
will not end up in landfill.
Our recycled range of tiles are
made from regranulated Ecotile.
They are dyed either graphite or
black at our factory. The granulate
is then transported and follows the
same manufacturing process as our
other tiles.
The majority of the Ecotile range is
manufactured from pre-dyed virgin
PVC pellets.
The pellets are transported via
hoses into our injection moulding
machine where they are turned
into a liquid PVC.
The liquid is then injected into a
mould and a tile is created. One
of our programmed robotic arms
carries the tile to a drying rack
where it is left to cool for several
minutes.
Once cool, the robotic arm will lift
the tile and place it carefully on top
of the other finished tiles.
When a cycle is complete, the tiles
are transported to storage racks by
our factory team and are ready to
be packaged and distributed.
20. Introducing Lifestyle: The all-weather tile
LIfestyle is manufactured from polypropylene; a 100%
recyclable thermoplastic polymer that has been UV
stabilised.
To accommodate for harsh weather, the tile has been
designed with a structured linear system of holes that allow
water to drain away. They also enable excellent airflow
whichhelpsthetilestostaycoolinfluctuatingtemperatures
– A perfect solution for swimming pool surrounds that get
really hot & hard to walk on in hot countries.
Ideal solution for outdoor events, exhibitions, pool
surrounds & sports courts.
22. Ecotile products use unique interlocking
joints that can be connected together with
a tap of a mallet. The tiles can be cut with a
guillotine, Stanley knife or a table saw with a
medium blade.
Installation
Unlike epoxy resin, polyurethane,
floor paint and other intrusive
flooring products, Ecotile flooring
can be laid directly over almost any
hard surface.
Cracking, paint delamination,
preparation, dust, dirt, damp &
contamination problems can all be
eliminated with a quick and simple
flooring solution.
In the majority of cases, Ecotile
can be installed without adhesives,
screeds or membranes.
Our product is well-known for the
way it can be loose laid quickly,
easily and without the need for
specialist tools.
23. Over the last 20 years we have worked with some of the world’s largest businesses
in some of the toughest industrial situations.
We are proud to be trusted by so many well-known businesses worldwide. Our
customers trust Ecotile to provide great industrial flooring that combines strength
and versatility with smart bespoke design. That’s exactly what we give them.
Accreditations.
Queen’s Award for Enterprise 2017: Innovation
Queen’s Award for Enterprise 2017: International Trade
ISO9001 Quality Standard
ISO 14001 Environmental Standard
CE Mark
BFI S1 Fire Rating
R10 Anti-Slip Ratings
BS EN 61340-5 / IEC 61340 (ESD flooring)
REACH compliant
Achilles Approved
Ü Mark
24. UK, Europe & The Americas Middle East, Africa & Asia
01582 788 232
Unit 15
North Luton Industrial Estate,
Sedgwick Road,
Luton, LU4 9DT
info@ecotileflooring.com
www.ecotileflooring.com
+971 (0)4 818 3105
+971 (0)55 813 7598
Office No. 09, 2nd Floor,
Clover Bay Tower,
Al Abraj Street, PO Box 123997,
Business Bay, Dubai, UAE.
Other Contacts
Germany: +49 (0) 62518032908
www.ecotileboden.com
France: +33 (0)2 37 64 02 86
www.ecotilefrance.com