1. The document provides a safety data sheet for Diethyl Phthalate (DEP), including its identification information, hazards, composition, safe handling and storage recommendations, physical and chemical properties, toxicity, and regulatory information.
2. DEP is not classified as hazardous but can cause eye and skin irritation. It is slightly soluble in water and readily biodegradable. Acute toxicity testing shows low oral and dermal toxicity but possible reproductive effects.
3. Precautions are recommended for handling including use of gloves, eye protection and adequate ventilation. DEP should be stored in a cool, well-ventilated area in original containers.
This document provides information on the installation, operation and maintenance of a York YCAJ-Series air cooled liquid chiller. It includes sections on supplier information, product description, transportation, installation, commissioning, operation, maintenance, troubleshooting, technical data, spare parts, and de-commissioning. Safety is emphasized, with warnings about hazards involving high temperatures, pressures, voltages, rotating parts, and refrigerant systems. The manual must be read thoroughly before working on the chiller.
Valeo Braking Systems Brake Fluid DOT 5.1 material safety data sheet 402407 4...Hugo Vallet
Valeo Braking Systems Brake Fluid DOT 5.1 material safety data sheet 402407 402408 402409
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID DOT 5.1
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
Valeo Braking Systems Brake Fluid DOT 4 material safety data sheet 402401 402...Hugo Vallet
Valeo Braking Systems Brake Fluid DOT 4 material safety data sheet
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID DOT 4
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
Valeo Braking Systems Brake Fluid DOT 4+ material safety data sheet 402406Hugo Vallet
This document provides a safety data sheet for a brake fluid product called BRAKE FLUID DOT 4+. It contains information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations and regulatory information. The product contains several hazardous ingredients including diethylene glycol, triethylene glycol monobutyl ether, and diethylene glycol monomethyl ether.
This document is a material safety data sheet for Liqtro Hydraulic S 68, a hydraulic lubricant containing zinc additives. It presents information on the product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product does not require classification based on health, environmental, or physical hazards. It has a flash point above 200 degrees Celsius and does not pose significant health effects.
Valeo Braking Systems Brake Fluid DOT3 material safety data sheet 402413Hugo Vallet
Valeo Braking Systems Brake Fluid DOT3 material safety data sheet 402413
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID DOT 3
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
This document provides a material safety data sheet for Liqtro Hydraulic ZD 68 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and stability. The product contains additives to improve lubricant performance and refined mineral base oil. It presents low health, environmental and physical hazards when handled properly.
This document provides information on Liqtro Extremo CD SAE 30 API Service CD lubricant. It identifies the product and company details in section 1. Section 2 discusses the product's health, environmental, and physical hazards. No significant health effects or hazardous ingredients are expected. The product has a flash point above 200°C and does not require classification based on hazards. Sections 3-7 cover first aid measures, firefighting, accidental spill response, handling and storage, and exposure control. Section 8 lists the product's physical and chemical properties, such as its liquid state, color, odor, and viscosity. Section 9 notes the product is stable and does not undergo hazardous polymerization.
This document provides information on the installation, operation and maintenance of a York YCAJ-Series air cooled liquid chiller. It includes sections on supplier information, product description, transportation, installation, commissioning, operation, maintenance, troubleshooting, technical data, spare parts, and de-commissioning. Safety is emphasized, with warnings about hazards involving high temperatures, pressures, voltages, rotating parts, and refrigerant systems. The manual must be read thoroughly before working on the chiller.
Valeo Braking Systems Brake Fluid DOT 5.1 material safety data sheet 402407 4...Hugo Vallet
Valeo Braking Systems Brake Fluid DOT 5.1 material safety data sheet 402407 402408 402409
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID DOT 5.1
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
Valeo Braking Systems Brake Fluid DOT 4 material safety data sheet 402401 402...Hugo Vallet
Valeo Braking Systems Brake Fluid DOT 4 material safety data sheet
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID DOT 4
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
Valeo Braking Systems Brake Fluid DOT 4+ material safety data sheet 402406Hugo Vallet
This document provides a safety data sheet for a brake fluid product called BRAKE FLUID DOT 4+. It contains information on product identification, hazards, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations and regulatory information. The product contains several hazardous ingredients including diethylene glycol, triethylene glycol monobutyl ether, and diethylene glycol monomethyl ether.
This document is a material safety data sheet for Liqtro Hydraulic S 68, a hydraulic lubricant containing zinc additives. It presents information on the product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product does not require classification based on health, environmental, or physical hazards. It has a flash point above 200 degrees Celsius and does not pose significant health effects.
Valeo Braking Systems Brake Fluid DOT3 material safety data sheet 402413Hugo Vallet
Valeo Braking Systems Brake Fluid DOT3 material safety data sheet 402413
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE FLUID DOT 3
- use of the substance/preparation: Functional fluids (brake fluid) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
This document provides a material safety data sheet for Liqtro Hydraulic ZD 68 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, and stability. The product contains additives to improve lubricant performance and refined mineral base oil. It presents low health, environmental and physical hazards when handled properly.
This document provides information on Liqtro Extremo CD SAE 30 API Service CD lubricant. It identifies the product and company details in section 1. Section 2 discusses the product's health, environmental, and physical hazards. No significant health effects or hazardous ingredients are expected. The product has a flash point above 200°C and does not require classification based on hazards. Sections 3-7 cover first aid measures, firefighting, accidental spill response, handling and storage, and exposure control. Section 8 lists the product's physical and chemical properties, such as its liquid state, color, odor, and viscosity. Section 9 notes the product is stable and does not undergo hazardous polymerization.
Valeo Braking Systems Brake Cleaner material safety data sheet 402029Hugo Vallet
Valeo Braking Systems Brake Cleaner material safety data sheet 402029
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE CLEANER
- use of the substance/preparation: Functional fluids (brake cleaner) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
This document is a material safety data sheet for Liqtro Turbine 68 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies the product and company details, summarizes that the product presents low health, environmental, and physical hazards. It provides first aid measures in case of inhalation, skin contact, eye contact or ingestion and outlines firefighting measures, handling and storage guidelines, exposure controls, and disposal considerations for the product.
This document is a material safety data sheet for Liqtro Hydraulic S 37, a hydraulic lubricant containing zinc additives. It presents information on the product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product does not require classification based on health, environmental, or physical hazards. It has a flash point above 200 degrees Celsius and does not pose significant health effects.
This document provides a material safety data sheet for Liqtro Hydraulic S 46 hydraulic lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other details. The product contains zinc-based additives and is classified as a low hazard that requires no special protective equipment for normal handling. Spills should be cleaned up with absorbent materials and preventing environmental contamination.
This document provides information on Liqtro Neat Cutting Oil A ISO VG 32. It is a mineral cutting oil formulated with EP additives and fatty esters to be chlorine-free with good lubricity and load capacity for light to medium machining. It presents low health, environmental, and fire/explosion hazards. Proper handling involves storing in a cool, well-ventilated area away from heat and ignition sources. Exposure controls include eye and skin protection, and the product can be disposed by burning in appropriate equipment or via the landfill.
This document provides a material safety data sheet for LIQTRO HYDRAULIC ZD 46 hydraulic lubricant. It describes the product as a hydraulic lubricant containing additives like zinc alkyl dithiophosphate and refined mineral base oil. The document indicates the product presents low health, environmental, and physical/chemical hazards. No significant health effects are expected from exposure. In case of fire, use carbon dioxide, foam, dry chemical or water to extinguish. Handle and store in a cool, well-ventilated place away from ignition sources and incompatible materials.
This document provides safety information for Liqtro Extremo 10W motor oil. It contains additives to improve lubrication as well as refined mineral base oil. No significant health hazards are expected from exposure. In the event of skin contact, wash with soap and water; eye contact should be flushed for 15 minutes. The product is combustible and protective equipment should be worn in the event of a fire. Spills should be cleaned up with absorbent materials and disposal procedures followed. When handling and storing, containers should be kept closed in a cool, well-ventilated area.
This document provides safety information for Liqtro Neat Cutting Oil B ISO VG 32. It summarizes that the product is a mineral cutting oil formulated with EP additives and fatty esters, intended for medium to heavy duty operations. The product does not contain any hazardous ingredients according to European regulations. It also presents handling guidelines including storing in a cool, well-ventilated area and wearing protective equipment like gloves and eye protection when handling.
This document is a material safety data sheet for Liqtro Turbine 46 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document outlines that the oil does not pose significant health hazards or require special precautions during normal use and handling, but may cause mild irritation with prolonged skin or eye contact. Instructions are provided for proper storage, spill response, firefighting, and disposal of the product.
This document is a material safety data sheet for Liqtro IGO 460, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of a fire, use water, foam or dry chemical extinguishers. Exposure is not expected to be a problem in well-ventilated areas, but prolonged skin contact may cause mild discomfort. It has a flash point above 200°C and does not require special disposal methods.
This document provides information on Liqtro Enduro Supra SAE 15W-40 motor oil, including:
- It is formulated for API SL performance and protects against deposits while reducing oil consumption.
- Contact information is provided for the blending plant and laboratory in Bekasi, Indonesia and the office in Jakarta.
- The product does not require classification based on health, environmental, or physical/chemical hazards. It can burn only when heated above the flash point.
- In case of inhalation, skin contact, or ingestion, remove the affected individual from exposure and seek prompt medical attention. For fires, use water spray, dry chemical, or foam to extinguish.
This document is a material safety data sheet for LIQTRO EXTREMO CH4 SAE 20W-50 API SERVICE CH4/SJ motor oil. It describes the product as a multigrade lubricant containing additives to improve lubricant performance. The document lists the product manufacturer and provides information on health, fire, and environmental hazards. It also includes details on first aid measures, firefighting measures, accidental release measures, storage, exposure controls, physical properties, and stability of the product.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 100, a hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage measures, firefighting guidelines, first aid instructions, and disposal considerations. The lubricant contains additives such as zinc alkyl dithiophosphate and refined mineral oil, and poses low health, environmental and physical hazards when handled properly.
This document is a material safety data sheet for Liqtro Turbine 32 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies no significant health hazards, low fire and explosion risk, and lists handling and storage guidelines. It provides contact information for the product manufacturer and summarizes first aid measures in case of inhalation, skin contact, eye contact or ingestion.
This document provides a material safety data sheet for LIQTRO Forming C, a metal forming lubricant. It identifies the product and company responsible for its distribution. The product does not pose significant health hazards and is not classified as dangerous. In the event of a fire, appropriate extinguishing methods should be used and protective equipment worn by firefighters. Proper handling and storage procedures are outlined to prevent risks like spills, exposure, and flammability issues.
This document provides information on Liqtro Enduro Supra SAE 20W-50 motor oil, including:
- It is formulated from selected high quality base oils and additives to provide protection against deposits, degradation, and evaporation.
- No significant health hazards are expected under normal conditions. It is not classified as hazardous to the environment.
- In case of fire, use carbon dioxide, foam, dry chemical or water fog. Personnel should wear self-contained breathing apparatus.
- If spilled, absorb with materials like sawdust and dispose properly. Prevent spill from entering water systems.
- Store in a cool, well-ventilated area away from heat and ignition sources
This document is a material safety data sheet for LIQTRO Forming A, a metal forming lubricant. It provides information on product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product contains EP, lubricity and anti-wear additives and provides tool and mold protection during metal forming. It does not contain any hazardous ingredients according to European regulations.
This document provides information on the product Liqtro TGO 140 SAE 140, a heavy-duty automotive gear lubricant. It identifies the product and company details. The product does not contain any hazardous ingredients according to European regulations. While no significant health effects are expected, it is recommended to use proper protective equipment like eye protection and gloves when handling. The product is stable and avoiding extreme heat. In case of fire, use water spray, foam or dry chemical to extinguish.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 32 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, stability, toxicological information, ecological impacts, and disposal considerations. The product contains additives to improve lubricant performance and refined mineral base oil, but does not require classification for health, environmental, or physical hazards. Proper precautions like ventilation and protective equipment are recommended for handling.
This document provides information on Liqtro Enduro Supra SAE 10W-30 motor oil, including:
- It is formulated for API SL performance and protects against deposits while resisting degradation.
- Contact information is provided for the blending plant and laboratory in Bekasi, Indonesia and the office in Jakarta.
- The product does not require classification based on health or environmental hazards. It can burn upon heating to high temperatures.
- If exposed, flush skin and eyes with water and seek medical attention if ingested in large amounts. Use proper protective equipment for firefighting.
- Store in a cool, well-ventilated area and handle carefully in containers. Avoid heat,
This document provides a material safety data sheet for Liqtro IGO 320, a gear lubricant. It lists the product name and company identification. It describes that the product has no significant health effects and is a low hazard. It provides first aid measures for inhalation, skin contact, eye contact and ingestion. It also details fire fighting measures, spill handling, storage, exposure control, physical and chemical properties, and stability.
Valeo Braking Systems Brake Cleaner material safety data sheet 402029Hugo Vallet
Valeo Braking Systems Brake Cleaner material safety data sheet 402029
SAFETY DATA SHEET in accordance with Regulation (EC) No 1907/2006 and Regulation (CE) N. 453/2010.
- trade name: BRAKE CLEANER
- use of the substance/preparation: Functional fluids (brake cleaner) for automobile industry.
- identification of the company: Valeo Service UK LTD
Heming Road - Washford - Redditch – Worcs B98 ODZ - England
- Website: www.valeoservice.co.uk
- Emergency telephone number: 844 892 0111 (24 hrs)
Learn more about Valeo Multi-Specialist DNA on www.valeoservice.co.uk
Valeo, automotive technology, naturally
This document is a material safety data sheet for Liqtro Turbine 68 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies the product and company details, summarizes that the product presents low health, environmental, and physical hazards. It provides first aid measures in case of inhalation, skin contact, eye contact or ingestion and outlines firefighting measures, handling and storage guidelines, exposure controls, and disposal considerations for the product.
This document is a material safety data sheet for Liqtro Hydraulic S 37, a hydraulic lubricant containing zinc additives. It presents information on the product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product does not require classification based on health, environmental, or physical hazards. It has a flash point above 200 degrees Celsius and does not pose significant health effects.
This document provides a material safety data sheet for Liqtro Hydraulic S 46 hydraulic lubricant. It lists the product and company identification, hazards identification, composition/information on ingredients, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls/personal protection, physical and chemical properties, stability and reactivity, toxicological information, and other details. The product contains zinc-based additives and is classified as a low hazard that requires no special protective equipment for normal handling. Spills should be cleaned up with absorbent materials and preventing environmental contamination.
This document provides information on Liqtro Neat Cutting Oil A ISO VG 32. It is a mineral cutting oil formulated with EP additives and fatty esters to be chlorine-free with good lubricity and load capacity for light to medium machining. It presents low health, environmental, and fire/explosion hazards. Proper handling involves storing in a cool, well-ventilated area away from heat and ignition sources. Exposure controls include eye and skin protection, and the product can be disposed by burning in appropriate equipment or via the landfill.
This document provides a material safety data sheet for LIQTRO HYDRAULIC ZD 46 hydraulic lubricant. It describes the product as a hydraulic lubricant containing additives like zinc alkyl dithiophosphate and refined mineral base oil. The document indicates the product presents low health, environmental, and physical/chemical hazards. No significant health effects are expected from exposure. In case of fire, use carbon dioxide, foam, dry chemical or water to extinguish. Handle and store in a cool, well-ventilated place away from ignition sources and incompatible materials.
This document provides safety information for Liqtro Extremo 10W motor oil. It contains additives to improve lubrication as well as refined mineral base oil. No significant health hazards are expected from exposure. In the event of skin contact, wash with soap and water; eye contact should be flushed for 15 minutes. The product is combustible and protective equipment should be worn in the event of a fire. Spills should be cleaned up with absorbent materials and disposal procedures followed. When handling and storing, containers should be kept closed in a cool, well-ventilated area.
This document provides safety information for Liqtro Neat Cutting Oil B ISO VG 32. It summarizes that the product is a mineral cutting oil formulated with EP additives and fatty esters, intended for medium to heavy duty operations. The product does not contain any hazardous ingredients according to European regulations. It also presents handling guidelines including storing in a cool, well-ventilated area and wearing protective equipment like gloves and eye protection when handling.
This document is a material safety data sheet for Liqtro Turbine 46 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document outlines that the oil does not pose significant health hazards or require special precautions during normal use and handling, but may cause mild irritation with prolonged skin or eye contact. Instructions are provided for proper storage, spill response, firefighting, and disposal of the product.
This document is a material safety data sheet for Liqtro IGO 460, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of a fire, use water, foam or dry chemical extinguishers. Exposure is not expected to be a problem in well-ventilated areas, but prolonged skin contact may cause mild discomfort. It has a flash point above 200°C and does not require special disposal methods.
This document provides information on Liqtro Enduro Supra SAE 15W-40 motor oil, including:
- It is formulated for API SL performance and protects against deposits while reducing oil consumption.
- Contact information is provided for the blending plant and laboratory in Bekasi, Indonesia and the office in Jakarta.
- The product does not require classification based on health, environmental, or physical/chemical hazards. It can burn only when heated above the flash point.
- In case of inhalation, skin contact, or ingestion, remove the affected individual from exposure and seek prompt medical attention. For fires, use water spray, dry chemical, or foam to extinguish.
This document is a material safety data sheet for LIQTRO EXTREMO CH4 SAE 20W-50 API SERVICE CH4/SJ motor oil. It describes the product as a multigrade lubricant containing additives to improve lubricant performance. The document lists the product manufacturer and provides information on health, fire, and environmental hazards. It also includes details on first aid measures, firefighting measures, accidental release measures, storage, exposure controls, physical properties, and stability of the product.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 100, a hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage measures, firefighting guidelines, first aid instructions, and disposal considerations. The lubricant contains additives such as zinc alkyl dithiophosphate and refined mineral oil, and poses low health, environmental and physical hazards when handled properly.
This document is a material safety data sheet for Liqtro Turbine 32 oil. It describes the product as a non-EP gas and steam turbine oil formulated to provide satisfactory viscosity and lubrication properties. The document identifies no significant health hazards, low fire and explosion risk, and lists handling and storage guidelines. It provides contact information for the product manufacturer and summarizes first aid measures in case of inhalation, skin contact, eye contact or ingestion.
This document provides a material safety data sheet for LIQTRO Forming C, a metal forming lubricant. It identifies the product and company responsible for its distribution. The product does not pose significant health hazards and is not classified as dangerous. In the event of a fire, appropriate extinguishing methods should be used and protective equipment worn by firefighters. Proper handling and storage procedures are outlined to prevent risks like spills, exposure, and flammability issues.
This document provides information on Liqtro Enduro Supra SAE 20W-50 motor oil, including:
- It is formulated from selected high quality base oils and additives to provide protection against deposits, degradation, and evaporation.
- No significant health hazards are expected under normal conditions. It is not classified as hazardous to the environment.
- In case of fire, use carbon dioxide, foam, dry chemical or water fog. Personnel should wear self-contained breathing apparatus.
- If spilled, absorb with materials like sawdust and dispose properly. Prevent spill from entering water systems.
- Store in a cool, well-ventilated area away from heat and ignition sources
This document is a material safety data sheet for LIQTRO Forming A, a metal forming lubricant. It provides information on product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, and regulatory information. The product contains EP, lubricity and anti-wear additives and provides tool and mold protection during metal forming. It does not contain any hazardous ingredients according to European regulations.
This document provides information on the product Liqtro TGO 140 SAE 140, a heavy-duty automotive gear lubricant. It identifies the product and company details. The product does not contain any hazardous ingredients according to European regulations. While no significant health effects are expected, it is recommended to use proper protective equipment like eye protection and gloves when handling. The product is stable and avoiding extreme heat. In case of fire, use water spray, foam or dry chemical to extinguish.
This document provides a material safety data sheet for Liqtro Hydraulic ZD 32 hydraulic lubricant. It lists the product and company identification, hazards, composition, safe handling and storage, exposure controls, physical and chemical properties, stability, toxicological information, ecological impacts, and disposal considerations. The product contains additives to improve lubricant performance and refined mineral base oil, but does not require classification for health, environmental, or physical hazards. Proper precautions like ventilation and protective equipment are recommended for handling.
This document provides information on Liqtro Enduro Supra SAE 10W-30 motor oil, including:
- It is formulated for API SL performance and protects against deposits while resisting degradation.
- Contact information is provided for the blending plant and laboratory in Bekasi, Indonesia and the office in Jakarta.
- The product does not require classification based on health or environmental hazards. It can burn upon heating to high temperatures.
- If exposed, flush skin and eyes with water and seek medical attention if ingested in large amounts. Use proper protective equipment for firefighting.
- Store in a cool, well-ventilated area and handle carefully in containers. Avoid heat,
This document provides a material safety data sheet for Liqtro IGO 320, a gear lubricant. It lists the product name and company identification. It describes that the product has no significant health effects and is a low hazard. It provides first aid measures for inhalation, skin contact, eye contact and ingestion. It also details fire fighting measures, spill handling, storage, exposure control, physical and chemical properties, and stability.
This document provides a material safety data sheet for Liqtro Enduro Ultra Full Synthetics SAE 10W-40 motor oil. It describes the product as a multigrade lubricant containing additives to improve lubricant performance and refined mineral base oil. The document states that the product does not contain any hazardous ingredients and presents low health, environmental, and fire/explosion hazards when handled properly. Exposure controls including ventilation, protective equipment, and limits are outlined.
This document is a material safety data sheet for Liqtro IGO 150, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of skin or eye contact, flush the affected area with water. It should be stored in a cool, well-ventilated area and handled with care, as the containers may contain pressure. The product does not require special protective equipment under normal conditions. It has a flash point above 200 degrees Celsius and will not react with water or oxidizing agents.
This document provides information on Liqtro Extremo 10W motor oil. It identifies the product and company details. The product contains additives like polyolefin amide alkyleneamine borate and does not require classification for health, environmental or physical hazards. In the event of exposure, the document outlines first aid measures. It also provides information on firefighting measures, handling and storage, exposure controls, physical and chemical properties, stability, toxicology and disposal considerations.
This document provides information on the material safety data sheet for Liqtro Extremo CF SAE 40 API Service CF lubricant. It contains additives that improve lubricant performance including polyolefin amide alkyleneamine borate and zinc alkyl dithiophosphate. The product poses low health, environmental and physical/chemical hazards. It has a flash point above 200°C and does not require classification as a dangerous substance. Proper personal protective equipment should be worn when handling.
This document provides a safety data sheet for Loctite 406 adhesive. It lists the product identifier and supplier contact information in Section 1. Section 2 identifies the product as a skin and eye irritant that may cause respiratory irritation. Section 3 provides the chemical composition, listing ethyl 2-cyanoacrylate as the main component. Section 4 gives first aid measures for inhalation, skin contact, eye contact and ingestion. Section 5 covers firefighting and Section 6 addresses accidental release measures. Sections 7-8 address safe handling, storage, exposure controls and personal protection when working with the product.
This safety data sheet provides information on LOCTITE LB 8021 400ML EFAT. It identifies the product, supplier contact information, product hazards, and composition. The main hazards are that it is an extremely flammable aerosol and pressurized container that may burst if heated. It contains butane, propane, and pentane. Exposure controls and protective equipment are recommended for handling.
This document is a material safety data sheet for Liqtro IGO 220, a gear lubricant containing additives to improve lubricant performance. It presents no significant health hazards but can form flammable mixtures when heated. In the event of skin or eye contact, flush the affected area with water. It should be stored in a cool, well-ventilated area and handled with care, as the containers may contain pressure. The product does not require special protective equipment under normal conditions. It has a flash point above 200 degrees Celsius and will not react with water or oxidizing agents.
This document provides information on Liqtro Enduro SF motor oil. It identifies the product and company details. The product is classified as non-hazardous and poses low risk of fire or explosion. Exposure can cause mild eye or skin irritation. In the event of contact, wash with water and seek medical attention if issues persist. The product contains no hazardous ingredients and has no significant health or environmental effects. It can be handled and stored safely at normal temperatures and pressures.
This safety data sheet provides information on Loctite 401, an adhesive containing 50-100% ethyl 2-cyanoacrylate. It lists the product identification, composition, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection for safe use. The sheet identifies skin and eye irritation as well as respiratory irritation as the main health hazards and provides guidance on personal protective equipment.
This document provides information on the material safety data sheet for Liqtro Extremo SAE 40 API Service CF4/SG lubricant. Some key points:
- It is a monograde lubricant containing additives to improve lubricant performance including polyolefin amide alkyleneamine borate and zinc alkyl dithiophosphate.
- It presents low health, environmental, and physical/chemical hazards. No significant health effects are expected.
- In the event of inhalation, skin contact, eye contact, or ingestion, first aid measures such as ventilation, flushing with water, and calling medical assistance are recommended.
- The product is stable and hazardous polymer
Compressor ISO VG 100 (Material Safety Data Sheet)Eko Kiswanto
This document provides a material safety data sheet for Liqtro Compressor 100 ISO VG 100 lubricant. It identifies the product as an ashless lubricant for compressors that does not contain any hazardous ingredients according to European regulations. The document lists the product identification and company details, summarizes that there are minimal health and environmental hazards, and provides guidance on handling, storage, exposure controls, and disposal of the product.
This document is a material safety data sheet for Liqtro Neat Cutting Oil Chlorine 32. It provides information on product identification, hazards, composition, safe handling and storage, firefighting measures, accidental release measures, exposure controls, physical and chemical properties, stability, toxicological information, ecological impact, and disposal considerations. The product is a mineral neat cutting oil formulated for metal applications where lubricity and non-staining properties are important. It does not contain any hazardous ingredients according to European regulations.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Comparative analysis between traditional aquaponics and reconstructed aquapon...bijceesjournal
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
UNLOCKING HEALTHCARE 4.0: NAVIGATING CRITICAL SUCCESS FACTORS FOR EFFECTIVE I...amsjournal
The Fourth Industrial Revolution is transforming industries, including healthcare, by integrating digital,
physical, and biological technologies. This study examines the integration of 4.0 technologies into
healthcare, identifying success factors and challenges through interviews with 70 stakeholders from 33
countries. Healthcare is evolving significantly, with varied objectives across nations aiming to improve
population health. The study explores stakeholders' perceptions on critical success factors, identifying
challenges such as insufficiently trained personnel, organizational silos, and structural barriers to data
exchange. Facilitators for integration include cost reduction initiatives and interoperability policies.
Technologies like IoT, Big Data, AI, Machine Learning, and robotics enhance diagnostics, treatment
precision, and real-time monitoring, reducing errors and optimizing resource utilization. Automation
improves employee satisfaction and patient care, while Blockchain and telemedicine drive cost reductions.
Successful integration requires skilled professionals and supportive policies, promising efficient resource
use, lower error rates, and accelerated processes, leading to optimized global healthcare outcomes.
1. Page 1 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifiers
Product Name : DIETHYL PHTHALATE (DEP)
CAS-No. : 84-66-2
EC No. : 201-550-6
SYNONYMS : Diethyl 1,2-1,2-Benzenedicarboxylate; Ethyl Phthalate: Neantine; Palatinol A;
O-Benzenedicarboxylic Acid Diethyl Esther; Placidol E; 1,2-Benzenedicarboxylic
Acid, Diethyl Ester; Phthalic Acid, Diethyl Ester; Phthalol; Dep; "Kodaflex" Dep
Plasticizer; Rcra U088; C12H14O4
1.2 Relevant identified uses of the substance or mixture and uses advised against
Identified uses: Laboratory chemicals, Manufacture of substances
1.3 Details of the supplier of the safety data sheet
Company: AARTI INDUSTRIES LTD.
Udyog Kshetra, 2nd Floor, LBS Marg,
Mulund Goregaon Link Road,
Mulund (W), Mumbai– 400 080, India
Telephone: 0091-22-67976666 / 25918195
Fax: 0091-22-25653185 / 25653234
Email ID info@aartigroup.com
------------------------------------------------------------------------------------------------------------------------------
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008
This substance is not classified as dangerous according to Directive 67/548/EEC
2.2 Label elements
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC
2.3 Other hazards
None
------------------------------------------------------------------------------------------------------------------------------
SECTION 3: Composition/information on ingredients
3.1 Substances
Synonyms: DEP
Formula: C12H14O4
Molecular Weight: 222,24 g/mol
CAS-No.: 84-66-2
EC-No.: 201-550-6
No components need to be disclosed according to the applicable regulations.
SECTION 4: First aid measures
4.1 Description of first aid measures
General advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
2. Page 2 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact: Wash off with soap and plenty of water. Consult a physician.
In case of eye contact: Flush eyes with water as a precaution.
If swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labeling (see section 2.2)
and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available
------------------------------------------------------------------------------------------------------------------------------
SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
No data available
------------------------------------------------------------------------------------------------------------------------------
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
6.3 Methods and materials for containment and cleaning up
Keep in suitable, closed containers for disposal.
6.4 Reference to other sections
For disposal see section 13.
------------------------------------------------------------------------------------------------------------------------------
SECTION 7: Handling and storage
7.1 Precautions for safe handling
For precautions see section 2.2.
3. Page 3 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
7.2 Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
7.3 Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated
------------------------------------------------------------------------------------------------------------------------------
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Components with workplace control parameters
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Full contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Splash contact
Material: Nitrile rubber
Minimum layer thickness: 0,11 mm
Break through time: 480 min
Test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN
374, contact the supplier of the CE approved gloves. This recommendation is advisory only and
must be evaluated by an industrial hygienist and safety officer familiar with the specific situation
of anticipated use by our customers. It should not be construed as offering an approval for any
specific use scenario.
Body Protection
Impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
4. Page 4 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
Respiratory protection
Respiratory protection not required. For nuisance exposures use type OV/AG (US) or type ABEK
(EU EN 14387) respirator cartridges. Use respirators and components tested and approved under
appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge
into the environment must be avoided.
------------------------------------------------------------------------------------------------------------------------------
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
Colour: light yellow
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: -3 °C – lit.
point
f) Initial boiling point and 298 - 299 °C - lit.
boiling range
g) Flash point 156,0 °C - closed cup
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower flammability Lower explosion limit: 0,75 %(V)
or explosive limits
k) Vapour pressure < 28 hPa at 25 °C
l) Vapour density 7,7 - (Air = 1.0)
m) Relative density 1,12 g/cm3 at 25 °C
n) Water solubility 0,932 g/l at 20 °C - OECD Test Guideline 105 - slightly soluble
o) Partition coefficient: log Pow: 2,2 at 41 °C
noctanol/water
p) Auto-ignition temperature 457,0 °C
q) Decomposition temperature no data available
r) Viscosity 11,53 mm2/s at 20 °C -
s) Explosive properties no data available
t) Oxidizing properties no data available
9.2 Other safety information
Relative vapour density 7,7 - (Air = 1.0)
------------------------------------------------------------------------------------------------------------------------------
SECTION 10: Stability and reactivity
10.1 Reactivity: no data available
10.2 Chemical stability: Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions: no data available
10.4 Conditions to avoid: no data available
10.5 Incompatible materials: Oxidizing agents, acids
10.6 Hazardous decomposition products: Other decomposition products - no data available In the event of
fire: see section 5
5. Page 5 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
------------------------------------------------------------------------------------------------------------------------------
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 Oral - rat - 8.600 mg/kg
Remarks: Behavioral:Somnolence (general depressed activity).
LC50 Inhalation - rat - 6 h - > 4.640 mg/m3
LD50 Dermal - rat - male and female - > 10.000 mg/kg
Skin corrosion/irritation
Skin - rabbit
Result: No skin irritation - 24 h
Serious eye damage/eye irritation
Eyes - rabbit
Result: Moderate eye irritation
Respiratory or skin sensitisation
- Mouse
Result: Did not cause sensitisation on laboratory animals. (OECD Test Guideline 429)
Germ cell mutagenicity
mouse
lymphocyte
Result: negative
Ames test
S. typhimurium
Result: negative
Carcinogenicity
Carcinogenicity - mouse - Skin
Tumorigenic: Equivocal tumorigenic agent by RTECS criteria. Liver: Tumors.
This product is or contains a component that is not classifiable as to its carcinogenicity based on its IARC,
ACGIH, NTP, or EPA classification.
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Reproductive toxicity - rat - Intraperitoneal
Effects on Fertility: Post-implantation mortality (e.g., dead and/or resorbed implants per total number of
implants). Effects on Embryo or Fetus: Fetotoxicity (except death, e.g., stunted fetus). Specific
Developmental Abnormalities: Musculoskeletal system.
Reproductive toxicity - mouse - male - Oral
Paternal Effects: Spermatogenesis (including genetic material, sperm morphology, motility, and count).
Paternal Effects: Prostate, seminal vessicle, Cowper's gland, accessory glands. Effects on Newborn: Live
birth index (# fetuses per litter; measured after birth).
Developmental Toxicity - rat - Oral
Specific Developmental Abnormalities: Musculoskeletal system.
Developmental Toxicity - mouse - Skin
Effects on Embryo or Fetus: Fetotoxicity (except death, e.g., stunted fetus). Specific Developmental
Abnormalities: Musculoskeletal system.
6. Page 6 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
Repeated dose toxicity - rat - male and female - Oral - No observed adverse effect level - 150 mg/kg
RTECS: TI1050000
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
------------------------------------------------------------------------------------------------------------------------------
SECTION 12: Ecological information
12.1 Toxicity
Toxicity to fish static test LC50 - Oncorhynchus mykiss (rainbow trout) - 12 mg/l - 96 h
Toxicity to daphnia and static test LC50 - Daphnia magna (Water flea) - 90 mg/l - 48 h
other aquatic invertebrates
Toxicity to algae static test EC50 - Desmodesmus subspicatus (Scenedesmus
subspicatus) – 23 mg/l - 72 h
(OECD Test Guideline 201)
12.2 Persistence and degradability
Biodegradability aerobic - Exposure time 28 d
Result: 94,6 % - Readily biodegradable.
12.3 Bioaccumulative potential
Bioaccumulation Lepomis macrochirus (Bluegill) - 21 d
- 0,00942 mg/l
Bioconcentration factor (BCF): 117
12.4 Mobility in soil
No data available
12.5 Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
Harmful to aquatic life.
------------------------------------------------------------------------------------------------------------------------------
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Product: Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging: Dispose of as unused product.
------------------------------------------------------------------------------------------------------------------------------
7. Page 7 of 7
SAFETY DATA SHEET
(EC) NO. 1907/2006 (REACH), (EC) NO 1272/2008 (CLP)
Diethyl Phthalate (01-2119486682-27-0004)
SECTION 14: Transport information
14.1 UN number
ADR/RID: - IMDG: - IATA: -
14.2 UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
14.3 Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
14.4 Packaging group
ADR/RID: - IMDG: - IATA: -
14.5 Environmental hazards
ADR/RID: NO IMDG Marine pollutant: NO IATA: NO
14.6 Special precautions for user
No data available
------------------------------------------------------------------------------------------------------------------------------
SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
15.2 Chemical Safety Assessment
For this product a chemical safety assessment was not carried out
------------------------------------------------------------------------------------------------------------------------------
SECTION 16: Other information
Further information
The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a
guide. The information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the
product. AARTI INDUSTRIES LIMITED shall not be held liable for any damage resulting from handling or from
contact with the above product.