Deep freezer
•Download as DOC, PDF•
0 likes•1,448 views
The document describes a deep freezer used for preparing and storing ice and water quality samples. It has a 300-liter capacity, temperature range of -20°C to +20°C, automatic operation, and is made of stainless steel inside and hot enameled outside. Additional features include a built-in voltage stabilizer, two doors and three trays, fully automatic and frost-free operation, self-draining defrosting, PUF insulation, and a low noise compressor.
Report
Share
Report
Share
Recommended
Refrigerator
This document provides specifications for a laboratory refrigerator. It is a vertical double door refrigerator with a 280 liter capacity. It runs on 140-280 VAC at 47-53 Hz and maintains a continuous temperature of 4°C. Key features include a built-in voltage stabilizer, two doors and three trays, self-draining defrosting, PUF insulation, and a locking system.
BOD Incubator by ACMAS Technologies Pvt Ltd.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/Xa4Je1
Incubator, bod
This document provides specifications for a biochemical oxygen demand incubator. The incubator has an inner chamber measuring approximately 0.5 x 0.5 x 0.8 meters made of stainless steel. It has a temperature range of 5 to 50 degrees Celsius controlled by a thermostat with an accuracy of ±0.5 degrees. Additional features include shelves, motorized air circulation, an insulated wall, and a glass door to monitor samples without temperature disturbance.
Bod or-low-temp-incubator
This document describes a low temperature incubator model ACM-I03429B made by Technocracy Pvt. Ltd. for testing biochemical oxygen demand of wastewater. The incubator has a temperature range of 2°C to 90°C and is used to determine levels of organic matter and nitrogen in wastewater samples. It has features like PID temperature control, LED display, forced air circulation and can be used for applications like BOD determinations, enzyme assays, and bacterial culturing.
Types of BOD Incubator by ACMAS Technologies Pvt Ltd.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/66xIhr
Economy Vacuum Ovens - SVAC1E, SVAC2E
The document describes vacuum ovens manufactured by SHEL LAB, including their applications and features. The vacuum ovens can be used for drying heat sensitive materials at lower temperatures than conventional ovens. They feature stainless steel chambers, tempered glass windows, and a selection of gasket materials for different applications. The document provides specifications for two economy series models, including their dimensions, capacity, temperature range, heat up time, and included shelves.
Water purifier, double distillation unit
This document provides specifications for a double distillation water purification unit. It distills water to a conductivity of 1.0 μS/cm or less at 25°C for generating reagent-grade water. The unit is made of quartz glass with a 1.5 liter/hour capacity. It runs on 220V power and includes a metallic stand, ring clamp, and operation manual. Safety features include over-heating protection and indicators.
Water bath, general purpose
A general purpose water bath has an inner size of approximately 0.4 x 0.3 x 0.1 meters, is made of stainless steel inside and stove enameled outside, and can maintain temperatures from ambient to 100°C with an accuracy of ±2°C. It has a stainless steel cover with 12 holes and features a drain cock or plug, double-walled insulation, and a pilot lamp to indicate thermostat operation.
Recommended
Refrigerator
This document provides specifications for a laboratory refrigerator. It is a vertical double door refrigerator with a 280 liter capacity. It runs on 140-280 VAC at 47-53 Hz and maintains a continuous temperature of 4°C. Key features include a built-in voltage stabilizer, two doors and three trays, self-draining defrosting, PUF insulation, and a locking system.
BOD Incubator by ACMAS Technologies Pvt Ltd.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/Xa4Je1
Incubator, bod
This document provides specifications for a biochemical oxygen demand incubator. The incubator has an inner chamber measuring approximately 0.5 x 0.5 x 0.8 meters made of stainless steel. It has a temperature range of 5 to 50 degrees Celsius controlled by a thermostat with an accuracy of ±0.5 degrees. Additional features include shelves, motorized air circulation, an insulated wall, and a glass door to monitor samples without temperature disturbance.
Bod or-low-temp-incubator
This document describes a low temperature incubator model ACM-I03429B made by Technocracy Pvt. Ltd. for testing biochemical oxygen demand of wastewater. The incubator has a temperature range of 2°C to 90°C and is used to determine levels of organic matter and nitrogen in wastewater samples. It has features like PID temperature control, LED display, forced air circulation and can be used for applications like BOD determinations, enzyme assays, and bacterial culturing.
Types of BOD Incubator by ACMAS Technologies Pvt Ltd.
We are manufacturing Weiber BOD Incubators and Lab Ovens for varied usages in various research and R&D laboratories across India and abroad. We are committed to provide international standard Bacteriological Incubator at reasonable prices, working closely with the industry captains and leading scientists to continuously improve and enhance the quality, reliability and efficiency of our products by incorporating various inputs provided by them, from time to time. For More Information Please Logon http://goo.gl/66xIhr
Economy Vacuum Ovens - SVAC1E, SVAC2E
The document describes vacuum ovens manufactured by SHEL LAB, including their applications and features. The vacuum ovens can be used for drying heat sensitive materials at lower temperatures than conventional ovens. They feature stainless steel chambers, tempered glass windows, and a selection of gasket materials for different applications. The document provides specifications for two economy series models, including their dimensions, capacity, temperature range, heat up time, and included shelves.
Water purifier, double distillation unit
This document provides specifications for a double distillation water purification unit. It distills water to a conductivity of 1.0 μS/cm or less at 25°C for generating reagent-grade water. The unit is made of quartz glass with a 1.5 liter/hour capacity. It runs on 220V power and includes a metallic stand, ring clamp, and operation manual. Safety features include over-heating protection and indicators.
Water bath, general purpose
A general purpose water bath has an inner size of approximately 0.4 x 0.3 x 0.1 meters, is made of stainless steel inside and stove enameled outside, and can maintain temperatures from ambient to 100°C with an accuracy of ±2°C. It has a stainless steel cover with 12 holes and features a drain cock or plug, double-walled insulation, and a pilot lamp to indicate thermostat operation.
Water bath, bacteriological
This document describes the specifications of a water bath used for incubating culture tubes in coliform analysis. The water bath has an inner size of approximately 0.4 x 0.3 x 0.15 meters, is made of stainless steel inside and stove enameled outside, and can maintain temperatures from ambient to 50°C with an accuracy of ±0.1°C. It has a double wall for insulation, a dome lid to hold test tubes vertically, and displays the internal water temperature.
CO2 Incubator Economy - SCO6WE, SCO12WE
This document summarizes the features of a CO2 incubator model. It has a PID microprocessor controller, heated outer door, tempered glass inner door, and maintains temperature uniformity while minimizing condensation. It has alarms for temperature and CO2 levels out of tolerance. It uses infrared sensors for fast CO2 recovery and stability. Extensive copper is used throughout to control contamination, and it maintains temperature, CO2 levels, and humidity to replicate mammalian environments for tissue and cell culture. It comes with a 5-year parts warranty and lifetime warranty on the water jacket chamber.
Heating unit ppt
LABOZ Inc. is the leading manufacturer, supplier, and exporter of Laboratory Products, Medical Products, Dental Equipments, autoclaves, and Dental Chairs such as 3 Ply Face Mask, Digital Glucometer, Cotton Medical Apron and much more. Our company is based in Ghaziabad, Uttar Pradesh and was established in the year 2010. Our utmost priority is to provide quality products to our customers and also first-class customer services. Healthcare equipment and supplies are prohibitively expensive for several caregiving facilities and there is an extreme lack of responsiveness and transparency.
Water geyser (heater)
This document specifies a water geyser (heater) that has a 120 liter capacity, heats water to 90°C with thermostatic control, and requires a 220 VAC ±25%, 47 to 53 Hz power supply for operation in a laboratory setting.
Incubator, bacteriological
This document specifies an incubator for bacteriological analysis with a stainless steel interior chamber, temperature range of 35-60 degrees Celsius controlled within 1 degree accuracy, digital display, 3 shelves, glass door, and includes a thermometer for measuring the interior temperature.
Compact Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/wWM2hi
Fume cupboard
The document specifies the requirements and features for a fume cupboard version 2, including an optimal air flow pattern, a water tap and sink, double socket electricity, fire proof inner surface, acid/alkali proof tiles, exhaust fan, ducting, double skin fabrication, and glass sliding front sash with counter weight to ventilate hazardous fumes safely during analysis.
Sample Preparation Equipment for Cement / limestone / plaster
Quality equipment for the preparation of samples for the cement industry. Laboratory mills, Pellet Press, Fluxers.
Cement Limestone Plaster - Sample Preparation equipment
Sample preparation equipment specially designed to control the quality and to R+D departments in the cement, limestone and plaster industries.
Testing/Manufacture/Salt Spray Test Chamber
The document describes salt spray chamber testing equipment. It provides specifications for various models of salt spray chambers, including model numbers 101A, 101B, 102A, and 102B. The chambers have stainless steel interiors and are designed to test corrosion resistance according to various standards like ASTM B117. Key features include temperature control between ambient and 60 degrees Celsius, atomizers to produce salt spray, and separate control panels.
Incubator shaker
We are manufacturers of Incubator shaker or orbital shakers in India since 1990. Our incubator shakers are widely
used for day to day bacteriological and varied laboratory applications requiring incubation as well as shaking tests
and procedures in variety of research and testing laboratories.
Sample cooler
The document describes sample coolers that provide efficient cooling for liquid, gas, or steam processes. The sample coolers have stainless steel construction for durability and use a double helical coil design to maximize heat exchange within a compact size. The removable shell allows for easy maintenance and cleaning. Models are available with different tube materials, sizes, and heat exchange areas to accommodate a variety of applications such as steam and water analysis systems.
Service ariston depok 0813-8024-0365
Service center ariston depok swh Sebuah pemanas air tenaga matahari (Water Heater) dapat menjadi solusi yang tepat untuk rumah anda. Jika anda frustrasi dengan biaya listrik rumah anda, mungkin sudah saatnya untuk menjangkau solusi energi yang lebih efisien. Anda bisa mendapatkan pemanas air lain yang jauh lebih efisien daripada yang anda miliki. Tenaga matahari tersedia melimpah tak terbatas untuk anda, ini solusi yang memberi manfaat untuk Anda
Avenger 91 particulate coalescing filter datasheet
The Avenger 91 filter provides flexibility for coalescing and particulate filtration applications. It has a large annulus making it well-suited for coalescing. It can handle temperatures up to 450°F and pressures up to 3,750 psig. Various element types like coalescers and stainless steel filters can be used. The 3 or 5 port designs allow for different installation configurations.
Genie 745 production gas sampling system datasheet
The Production Gas Sampling System (PGSS) provides a liquid-free, low pressure sample from natural gas streams for process control analysis. It extracts the sample using a direct-drive probe, removes liquids using a coalescing filter and membrane separator, and reduces pressure using a heated regulator without Joule-Thomson cooling effects. Optional heat tubing allows compatibility with low and high dew points. The PGSS mounts directly onto pipelines for accurate sampling close to wellheads.
Chhattisgarh
The World Bank conducted a final supervision mission in May 2014 to review a water resources project in Chhattisgarh, India. The project aimed to strengthen water resource management institutions and expand hydrological monitoring networks. Over 90% of allocated funds had been spent as of March 2014, with additional expenditures expected through May 2014. Key achievements included upgrading data centers, installing rain and groundwater monitoring equipment, conducting trainings, and publishing water resources data. The project improved availability of hydrological data for use in planning irrigation projects, infrastructure design, and other development activities in Chhattisgarh.
Punjab 8.4.14 edt
The document summarizes the Hydrology Project-II being implemented in Punjab, India. Key points:
- The Rs. 46.65 crore project aims to improve water resource data collection and management. Around 80% of the work and funding has been used.
- Networks to monitor groundwater, surface water, and rainfall have been installed across 700, 25, and 81 stations respectively. Digital equipment transmits data in real time.
- Three data centers have been constructed to store and analyze water data. A state data center in Mohali will house various water resource offices and laboratories.
- Observed hydrological data will be shared with state agencies, CGWB, and other users to inform water
Pcs 070514
The document provides an overview of the World Bank Monitoring Mission for the Hydrology Project Phase II in India from May 06-09, 2014. It summarizes the key achievements and post-project plans for each of the implementing agencies. The agencies include 13 state organizations and 8 central agencies. The objectives of HP-II were to extend and promote the sustained use of hydrological information systems to improve water resources planning and management. The estimated cost was Rs. 631.83 crore with funding from the World Bank. Several agencies had completed construction of data centers, monitoring equipment installations, and pilot studies. Plans after the project included continuing maintenance and operations, staff training, and further developing applications.
Odisha sw wb mission-may14
This document summarizes the progress and completion of the Odisha Hydrology Project-II. The key points are:
1) The project had a total revised cost of Rs. 13.46 crore and ran from April 2006 to May 2014 to strengthen surface water data collection and decision support systems in Odisha.
2) Financial progress shows that Rs. 891.04 crore was spent out of the total revised cost of Rs. 1346 crore. Major components included installing a real-time data acquisition system and developing decision support systems for drought monitoring and conjunctive surface and groundwater use.
3) Key achievements were establishing the concept for a real-time data acquisition system,
Mp surface water
The document summarizes a review meeting for the Hydrology Project Phase II in Madhya Pradesh, India. The project involves establishing surface water and groundwater monitoring stations. For surface water, 24 river gauge stations and 52 meteorological stations were set up across three river basins. For groundwater, 3750 observation wells and 625 piezometer wells were established. The project period was from 2004-2014 with a total cost of Rs. 24.67 crores. Major achievements included upgrading monitoring stations, establishing new stations, and developing decision support systems for reservoir management and groundwater planning. Lessons learned and plans for continuing activities after the project are also discussed.
Maharashtra sw_ce_050514
The document provides information on the financial targets and achievements of a hydrological project in India. It summarizes that as of March 2014, expenditure was Rs. 304.959 crores out of the revised target of Rs. 399.808 crores. It also describes various components of the project including institutional strengthening activities conducted, the development of decision support systems and real-time data systems for river basins, and studies carried out on optimizing monitoring networks and evaluating the impacts of water allocation changes. Lessons learned included the need for stronger central-state linkages and continued consultant support to meet project goals.
Kerala ground water
The document summarizes two hydrology projects in Kerala, India from 1996-2004 and 2006-2014. It provides financial details and physical progress updates on the projects, including building construction, staff hiring, equipment procurement, and the establishment of data dissemination and decision support systems. Key accomplishments include the development of applications to study conjunctive use, artificial recharge, reservoir operation, and more. Lessons learned include the benefits of integrated surface and groundwater management and adopting techniques from other agencies.
More Related Content
What's hot
Water bath, bacteriological
This document describes the specifications of a water bath used for incubating culture tubes in coliform analysis. The water bath has an inner size of approximately 0.4 x 0.3 x 0.15 meters, is made of stainless steel inside and stove enameled outside, and can maintain temperatures from ambient to 50°C with an accuracy of ±0.1°C. It has a double wall for insulation, a dome lid to hold test tubes vertically, and displays the internal water temperature.
CO2 Incubator Economy - SCO6WE, SCO12WE
This document summarizes the features of a CO2 incubator model. It has a PID microprocessor controller, heated outer door, tempered glass inner door, and maintains temperature uniformity while minimizing condensation. It has alarms for temperature and CO2 levels out of tolerance. It uses infrared sensors for fast CO2 recovery and stability. Extensive copper is used throughout to control contamination, and it maintains temperature, CO2 levels, and humidity to replicate mammalian environments for tissue and cell culture. It comes with a 5-year parts warranty and lifetime warranty on the water jacket chamber.
Heating unit ppt
LABOZ Inc. is the leading manufacturer, supplier, and exporter of Laboratory Products, Medical Products, Dental Equipments, autoclaves, and Dental Chairs such as 3 Ply Face Mask, Digital Glucometer, Cotton Medical Apron and much more. Our company is based in Ghaziabad, Uttar Pradesh and was established in the year 2010. Our utmost priority is to provide quality products to our customers and also first-class customer services. Healthcare equipment and supplies are prohibitively expensive for several caregiving facilities and there is an extreme lack of responsiveness and transparency.
Water geyser (heater)
This document specifies a water geyser (heater) that has a 120 liter capacity, heats water to 90°C with thermostatic control, and requires a 220 VAC ±25%, 47 to 53 Hz power supply for operation in a laboratory setting.
Incubator, bacteriological
This document specifies an incubator for bacteriological analysis with a stainless steel interior chamber, temperature range of 35-60 degrees Celsius controlled within 1 degree accuracy, digital display, 3 shelves, glass door, and includes a thermometer for measuring the interior temperature.
Compact Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
1800 °C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. For More Information Please Logon http://goo.gl/wWM2hi
Fume cupboard
The document specifies the requirements and features for a fume cupboard version 2, including an optimal air flow pattern, a water tap and sink, double socket electricity, fire proof inner surface, acid/alkali proof tiles, exhaust fan, ducting, double skin fabrication, and glass sliding front sash with counter weight to ventilate hazardous fumes safely during analysis.
Sample Preparation Equipment for Cement / limestone / plaster
Quality equipment for the preparation of samples for the cement industry. Laboratory mills, Pellet Press, Fluxers.
Cement Limestone Plaster - Sample Preparation equipment
Sample preparation equipment specially designed to control the quality and to R+D departments in the cement, limestone and plaster industries.
Testing/Manufacture/Salt Spray Test Chamber
The document describes salt spray chamber testing equipment. It provides specifications for various models of salt spray chambers, including model numbers 101A, 101B, 102A, and 102B. The chambers have stainless steel interiors and are designed to test corrosion resistance according to various standards like ASTM B117. Key features include temperature control between ambient and 60 degrees Celsius, atomizers to produce salt spray, and separate control panels.
Incubator shaker
We are manufacturers of Incubator shaker or orbital shakers in India since 1990. Our incubator shakers are widely
used for day to day bacteriological and varied laboratory applications requiring incubation as well as shaking tests
and procedures in variety of research and testing laboratories.
Sample cooler
The document describes sample coolers that provide efficient cooling for liquid, gas, or steam processes. The sample coolers have stainless steel construction for durability and use a double helical coil design to maximize heat exchange within a compact size. The removable shell allows for easy maintenance and cleaning. Models are available with different tube materials, sizes, and heat exchange areas to accommodate a variety of applications such as steam and water analysis systems.
Service ariston depok 0813-8024-0365
Service center ariston depok swh Sebuah pemanas air tenaga matahari (Water Heater) dapat menjadi solusi yang tepat untuk rumah anda. Jika anda frustrasi dengan biaya listrik rumah anda, mungkin sudah saatnya untuk menjangkau solusi energi yang lebih efisien. Anda bisa mendapatkan pemanas air lain yang jauh lebih efisien daripada yang anda miliki. Tenaga matahari tersedia melimpah tak terbatas untuk anda, ini solusi yang memberi manfaat untuk Anda
Avenger 91 particulate coalescing filter datasheet
The Avenger 91 filter provides flexibility for coalescing and particulate filtration applications. It has a large annulus making it well-suited for coalescing. It can handle temperatures up to 450°F and pressures up to 3,750 psig. Various element types like coalescers and stainless steel filters can be used. The 3 or 5 port designs allow for different installation configurations.
Genie 745 production gas sampling system datasheet
The Production Gas Sampling System (PGSS) provides a liquid-free, low pressure sample from natural gas streams for process control analysis. It extracts the sample using a direct-drive probe, removes liquids using a coalescing filter and membrane separator, and reduces pressure using a heated regulator without Joule-Thomson cooling effects. Optional heat tubing allows compatibility with low and high dew points. The PGSS mounts directly onto pipelines for accurate sampling close to wellheads.
What's hot (15)
Compact Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Compact Muffle Furnace (1800 °C) by ACMAS Technologies Pvt Ltd.
Sample Preparation Equipment for Cement / limestone / plaster
Sample Preparation Equipment for Cement / limestone / plaster
Cement Limestone Plaster - Sample Preparation equipment
Cement Limestone Plaster - Sample Preparation equipment
Avenger 91 particulate coalescing filter datasheet
Avenger 91 particulate coalescing filter datasheet
Genie 745 production gas sampling system datasheet
Genie 745 production gas sampling system datasheet
More from hydrologywebsite1
Chhattisgarh
The World Bank conducted a final supervision mission in May 2014 to review a water resources project in Chhattisgarh, India. The project aimed to strengthen water resource management institutions and expand hydrological monitoring networks. Over 90% of allocated funds had been spent as of March 2014, with additional expenditures expected through May 2014. Key achievements included upgrading data centers, installing rain and groundwater monitoring equipment, conducting trainings, and publishing water resources data. The project improved availability of hydrological data for use in planning irrigation projects, infrastructure design, and other development activities in Chhattisgarh.
Punjab 8.4.14 edt
The document summarizes the Hydrology Project-II being implemented in Punjab, India. Key points:
- The Rs. 46.65 crore project aims to improve water resource data collection and management. Around 80% of the work and funding has been used.
- Networks to monitor groundwater, surface water, and rainfall have been installed across 700, 25, and 81 stations respectively. Digital equipment transmits data in real time.
- Three data centers have been constructed to store and analyze water data. A state data center in Mohali will house various water resource offices and laboratories.
- Observed hydrological data will be shared with state agencies, CGWB, and other users to inform water
Pcs 070514
The document provides an overview of the World Bank Monitoring Mission for the Hydrology Project Phase II in India from May 06-09, 2014. It summarizes the key achievements and post-project plans for each of the implementing agencies. The agencies include 13 state organizations and 8 central agencies. The objectives of HP-II were to extend and promote the sustained use of hydrological information systems to improve water resources planning and management. The estimated cost was Rs. 631.83 crore with funding from the World Bank. Several agencies had completed construction of data centers, monitoring equipment installations, and pilot studies. Plans after the project included continuing maintenance and operations, staff training, and further developing applications.
Odisha sw wb mission-may14
This document summarizes the progress and completion of the Odisha Hydrology Project-II. The key points are:
1) The project had a total revised cost of Rs. 13.46 crore and ran from April 2006 to May 2014 to strengthen surface water data collection and decision support systems in Odisha.
2) Financial progress shows that Rs. 891.04 crore was spent out of the total revised cost of Rs. 1346 crore. Major components included installing a real-time data acquisition system and developing decision support systems for drought monitoring and conjunctive surface and groundwater use.
3) Key achievements were establishing the concept for a real-time data acquisition system,
Mp surface water
The document summarizes a review meeting for the Hydrology Project Phase II in Madhya Pradesh, India. The project involves establishing surface water and groundwater monitoring stations. For surface water, 24 river gauge stations and 52 meteorological stations were set up across three river basins. For groundwater, 3750 observation wells and 625 piezometer wells were established. The project period was from 2004-2014 with a total cost of Rs. 24.67 crores. Major achievements included upgrading monitoring stations, establishing new stations, and developing decision support systems for reservoir management and groundwater planning. Lessons learned and plans for continuing activities after the project are also discussed.
Maharashtra sw_ce_050514
The document provides information on the financial targets and achievements of a hydrological project in India. It summarizes that as of March 2014, expenditure was Rs. 304.959 crores out of the revised target of Rs. 399.808 crores. It also describes various components of the project including institutional strengthening activities conducted, the development of decision support systems and real-time data systems for river basins, and studies carried out on optimizing monitoring networks and evaluating the impacts of water allocation changes. Lessons learned included the need for stronger central-state linkages and continued consultant support to meet project goals.
Kerala ground water
The document summarizes two hydrology projects in Kerala, India from 1996-2004 and 2006-2014. It provides financial details and physical progress updates on the projects, including building construction, staff hiring, equipment procurement, and the establishment of data dissemination and decision support systems. Key accomplishments include the development of applications to study conjunctive use, artificial recharge, reservoir operation, and more. Lessons learned include the benefits of integrated surface and groundwater management and adopting techniques from other agencies.
Goa
The document summarizes the Hydrology Project-II implemented in Goa between 2006-2014 with funding from the World Bank. The key aspects include:
- Establishment of 11 river gauge stations, 4 automatic weather stations, and 6 automatic rain gauge stations to improve surface water and hydro-meteorological data collection.
- Installation of 47 open wells and 57 piezometers to monitor groundwater levels across 9 river basins in Goa.
- Construction of a new data center and level II+ laboratory to store, analyze and disseminate hydrological data to support water resource management and planning.
- Capacity building initiatives including training of over 200 local staff on hydrological monitoring and data management.
Gujarat surface water
This document provides expenditure details and progress updates for the Phase II (2006-2014) implementation of the Narmada, Water Resources, Water Supply and Kalpsar Department in Gujarat, India. It outlines spending on civil works, goods, consultancy, and trainings. It also describes the physical progress made in consolidating hydrological data, raising awareness, implementing decision support systems, and conducting purpose-driven studies. Proposals are made for continuing certain activities in potential Phase III of the project.
Cwprs
Central Water and Power Research Station (CWPRS) in Pune saw several advancements under the World Bank's Hydrology Project II (HP-II) including:
1) Technical trainings for over 100 CWPRS officers in areas like water resources planning, climate change impacts, and more.
2) Infrastructure upgrades including a Supervisory Control and Data Acquisition system, laboratory equipment, and renovated buildings.
3) Research activities such as optimizing stream gauge networks in Maharashtra's Bhima river basin and hydrographic surveys of the Tawa reservoir.
4) Over Rs. 4 crore was spent on civil works, equipment, trainings and other costs aligned with the goals of
Cpcb hp ii final supervision mission
The document summarizes the major activities and achievements of the Central Pollution Control Board's Hydrology Project-II regarding water quality monitoring. Some of the key points include:
- Installation of 10 real-time water quality monitoring stations on the Ganga and Yamuna rivers
- Development of a GIS-based water quality web portal to visualize historical and current water quality data
- Organization of 30 training workshops on water quality monitoring that reached over 750 laboratory staff
- Renovation of the CPCB water laboratory and development of water quality criteria and standards
The project aims to continue activities like annual maintenance of monitoring stations and the web portal, as well as propose new initiatives for the next phase including nationwide water pollution
Bbmb
The document describes BBMB's Real Time Decision Support System (RTDSS) project. The objectives are to incorporate advanced data acquisition and communication systems to help with operational management of Bhakra and Beas reservoirs. The system collects telemetry data from over 80 stations, including rainfall, water levels, snow levels. It also downloads satellite data and forecasts. The data is analyzed using hydrological and hydrodynamic models to forecast reservoir inflows and water levels to help with flood control and water distribution.
Andhra pradesh surface water
The World Bank conducted a final supervision and completion mission for the Hydrology Project in Andhra Pradesh from May 7-8, 2014. The project aimed to strengthen surface water data collection networks and build institutional capacity for hydrological data management and use. Key achievements included establishing 25 additional data collection stations, procuring IT equipment, developing a project website, and providing training. Expenditures totaled Rs. 4.13 crore against the revised project cost of Rs. 8.92 crore. Moving forward, the document discusses continuing project activities in Andhra Pradesh and potential areas of focus for a phase III of the Hydrology Project.
1. gujarat gw presentation wb_may-2014 7052014
This document provides a summary of the financial progress and achievements of the Gujarat - Ground Water hydrology project. Some key points:
- Total projected cost is 176.32 crore INR, of which 169.11 crore (96%) has been spent as of March 2014.
- Major activities include upgrading the piezometer network, procuring equipment like DWLRs, GIS data, and training programs.
- Key outcomes are improved groundwater data availability and monitoring networks, as well as awareness raising and decision support systems.
- Lessons learned include the importance of data quality control, coordination, and training to improve groundwater management.
Download-manuals-surface water-manual-surfacewatero&m-norms
This document outlines surface water monitoring procedures and maintenance norms for various types of stations and laboratories in India. It provides maintenance cost estimates for:
1. Standard and Autographic Rain Gauge stations, including costs for civil works, consumables, and staffing. The estimated annual cost is Rs. 5,750 for SRG stations and Rs. 8,200 for ARG stations.
2. Full Climate stations, including costs for civil works, equipment maintenance, consumables, and staffing. The estimated annual cost is Rs. 56,000.
3. GD (Gauge Discharge) stations of various types, including wading, bridge/cableway, and boat outfit stations. Annual maintenance costs are
Download-manuals-surface water-manual-illustrations-hydrologicalobservations
The document describes methods for hydrological observations including rainfall, water level, discharge, and inspection of observation stations. It contains sections on ordinary and recording rainfall observation, ordinary and recording water level observation, observation of discharge using current meters and floats, and inspection of rainfall and water level observation stations. The document was produced by the Ministry of Construction in Japan.
Download-manuals-surface water-manual-45howtoreviewmonitoringnetworks
This document provides guidance on how to review monitoring networks. It begins with an introduction on the objectives and physical characteristics that networks are based on. It then discusses the types of networks, including basic, secondary, dedicated, and representative networks. The document outlines the steps in network design, which include assessing data needs, setting objectives, determining required network density, reviewing the existing network, and conducting a cost-effectiveness analysis. Specific guidance is provided on reviewing rainfall and hydrometric networks.
Download-manuals-water quality-wq-training-44howtocarryoutcorrelationandspec...
This document provides information and instructions for conducting correlation and spectral analysis. It includes definitions of autocovariance, autocorrelation, cross-covariance, and cross-correlation functions. It also defines variance spectrum and spectral density functions. The document provides examples of applying these analytical techniques to time series data, including monthly rainfall and daily water level data. It demonstrates how these techniques can be used to identify periodicities and correlations in hydrological time series data.
Download-manuals-hydrometeorology-data processing-43statisticalanalysiswithr...
This document provides guidance on statistical analysis of rainfall and discharge data. It discusses graphical representation of data including histograms, line diagrams, and cumulative frequency diagrams. It also covers measures of central tendency, dispersion, skewness, kurtosis and percentiles. The document emphasizes that hydrological time series must meet stationarity conditions to be suitable for statistical analysis and discusses evaluating and accounting for trends and periodic components when analyzing rainfall and discharge data.
Download-manuals-ground water-manual-gw-volume8operationmanualdataprocessing...
This document provides operational details for groundwater data processing and analysis in India. It outlines the monitoring networks for water levels, quality, and hydro-meteorology. It describes the geological structures, soil types, typical groundwater issues, and the organizational setup of the responsible groundwater agency. The agency collects various dynamic data through monitoring networks to estimate groundwater resources and inform management recommendations in an annual groundwater yearbook.
More from hydrologywebsite1 (20)
Download-manuals-surface water-manual-surfacewatero&m-norms
Download-manuals-surface water-manual-surfacewatero&m-norms
Download-manuals-surface water-manual-illustrations-hydrologicalobservations
Download-manuals-surface water-manual-illustrations-hydrologicalobservations
Download-manuals-surface water-manual-45howtoreviewmonitoringnetworks
Download-manuals-surface water-manual-45howtoreviewmonitoringnetworks
Download-manuals-water quality-wq-training-44howtocarryoutcorrelationandspec...
Download-manuals-water quality-wq-training-44howtocarryoutcorrelationandspec...
Download-manuals-hydrometeorology-data processing-43statisticalanalysiswithr...
Download-manuals-hydrometeorology-data processing-43statisticalanalysiswithr...
Download-manuals-ground water-manual-gw-volume8operationmanualdataprocessing...
Download-manuals-ground water-manual-gw-volume8operationmanualdataprocessing...
Deep freezer
- 1. 40.011 DEEP FREEZER Approval Date: January 2008 Version: 2 Purpose • For preparation of ice as well as storage of samples. Ice is used in a cool box during transportation of water quality samples from the field to a laboratory. Specifications Capacity approx. 300 litres front loading facility range should cover -20°C to +20°C, automatic material stainless steel inside, hot enameled outside power supply starting voltage 160 to 260 VAC, 50 Hz running voltage 140 to 280 VAC, 50 Hz Features • built in voltage stabiliser • 2 doors and 3 trays • frost free type, fully automatic • self draining defrosting • PUF insulation • Low noise compressor Accessories • locking system Equipment Specification: DEEP FREEZER Version 2 40.011-1/1