This document provides a summary and presentation on powered industrial equipment safety. It notes that managers and supervisors are responsible for employee safety around this equipment. It also discusses OSHA statistics on accidents involving this equipment, including common causes. The presentation provides tips for safely operating various powered industrial equipment in different environments and scenarios. It emphasizes the importance of training, maintenance, and following safety procedures to reduce accidents.
Forklifts can be dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing)because the driver did not see them. Owing to their size and weight, injuries resulting from forklifts are generally very serious. Accidents involving them are often caused by poor supervision and a lack of training. The following forklift safety tips will help you and those you work with stay safe around forklifts. Thanks to the Health and Safety Authority.
Forklifts can be dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing)because the driver did not see them. Owing to their size and weight, injuries resulting from forklifts are generally very serious. Accidents involving them are often caused by poor supervision and a lack of training. The following forklift safety tips will help you and those you work with stay safe around forklifts. Thanks to the Health and Safety Authority.
These slides focus on safety alerts posted by the Mine Safety Health Administration for 2016. There are printouts at the end to make the presentation interactive.
A short refresher course in safe forklift operation. available for presentation online or at your workplace with checklists, planning, scheduling tips and information. contact Eric at erickay84@gmail.com
Accidents caused by powered industrial trucks (PIT), commonly called forklifts or lift trucks, can arise due to a misuse of the machinery itself, as well as poor or unsafe working conditions. As an employer, the biggest opportunity for reducing these incidents is to prepare your team and monitor the state of your workplace.
Proper forklift training is important for avoiding property damage, injury, or even death. But - are your trainers passing along the right knowledge when it comes to safety? Trainers who will be training your forklift operators are essentially the last line of defense in stopping untrained or unskilled operators from operating a forklift. This course trains the trainer, making sure safety remains a cornerstone of your operations.
Attendees who complete this training will receive certification and will be able to train and certify other operators to OSHA standard.
Please understand this is for reference and not for training.
Safety First, Compliance Training is not authorizing the use of this Power
Point Presentation for any purpose other than a review and does not warrant
the content for misrepresentation. Any form of use, wether whole or in part
will constitute violation of this agreement.
You can understand I can not monitor your interpretation of this presentation
and will not be available to defend you not knowing your conversations or
content of class conversations. Please understand.
Feel free to contact us for any other training you maybe in need of for
aerials, skid-steer, forks or other training need you may have.
Regards,
Denise
Denise Almonte
Safety First, Compliance Safety Training
708-977-9106
These slides focus on safety alerts posted by the Mine Safety Health Administration for 2016. There are printouts at the end to make the presentation interactive.
A short refresher course in safe forklift operation. available for presentation online or at your workplace with checklists, planning, scheduling tips and information. contact Eric at erickay84@gmail.com
Accidents caused by powered industrial trucks (PIT), commonly called forklifts or lift trucks, can arise due to a misuse of the machinery itself, as well as poor or unsafe working conditions. As an employer, the biggest opportunity for reducing these incidents is to prepare your team and monitor the state of your workplace.
Proper forklift training is important for avoiding property damage, injury, or even death. But - are your trainers passing along the right knowledge when it comes to safety? Trainers who will be training your forklift operators are essentially the last line of defense in stopping untrained or unskilled operators from operating a forklift. This course trains the trainer, making sure safety remains a cornerstone of your operations.
Attendees who complete this training will receive certification and will be able to train and certify other operators to OSHA standard.
Please understand this is for reference and not for training.
Safety First, Compliance Training is not authorizing the use of this Power
Point Presentation for any purpose other than a review and does not warrant
the content for misrepresentation. Any form of use, wether whole or in part
will constitute violation of this agreement.
You can understand I can not monitor your interpretation of this presentation
and will not be available to defend you not knowing your conversations or
content of class conversations. Please understand.
Feel free to contact us for any other training you maybe in need of for
aerials, skid-steer, forks or other training need you may have.
Regards,
Denise
Denise Almonte
Safety First, Compliance Safety Training
708-977-9106
Presentation of Atlet´s range or narrow aisle forklift trucks. Man-down or man-up trucks for stackning or picking in very narow aisles. For efficient stacking in rail or wire guided aisles.
Forklifts are a common sight in many industries. Whether used in warehouses, retail
applications or elsewhere, these vehicles are crucial tools in the daily operations of many
businesses. Because of this frequent level of use, however, many operators and nearby
pedestrians become complacent regarding safety protocols. This complacency can have many
ill effects, including asset damage, employee discipline, fines, injury, and even death.
The presentation provides real value and practices that you can use to make improvements in your workplace. Topics covered include:
- Pre- forklift operation best practices
- Comprehensive understanding OSHA regulations
- Improvements to minimize likelihood of fines
- Enhancements to decrease damage of forklifts
Safety Man and Machine Presentation June-2019 Rev-1
Every Year a significant number of people get injured and killed by accidents involving vehicles in the workplace
Forklifts are extremely useful workplace vehicles, as long as they are used safely and properly by operators who have been trained and are deemed competent to use them. Forklifts are dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing). Forklift accidents can cause serious injury, death, property and product damage. Accidents can be prevented if risk assessment are conducted, safe work procedures are followed, regular Tool Box Talks are conducted and HSE continuous surveillance observations of work tasks are performed periodically.
Common Forklift Hazards:
• Overloading
• Unsafe Stacking
• Speeding
• Unauthorized operation of forklift
• Untrained forklift operators.
• Pedestrians and forklifts moving in the same place.
• Obstruction in the path e.g. overhead, uneven ground surfaces, blind corners etc.
• Reversing
Common Safe Practices:
• Prior to use, forklifts must be inspected by a competent person, & inspection sticker should be posted on it.
• Only trained and authorized operators can operate a forklift.
• Carry out daily forklift pre-operation checks using checklist.
• Report to supervisor any forklift damage or problem.
• Don’t use a forklift to lift a worker.
• Check the load loads carefully before moving them for stability and damage.
• Slow down and sound the horn at crossings, and locations where view is blocked.
• Do not authorize anyone to stand or walk under the load or forklift machinery.
• Be aware of the height of the load, mast and overhead guard of the forklift when entering or existing buildings.
• Don’t handle loads that are above the weight capacity of the forklift.
• Follow the speed limit.
• Flagmen must be available while forklift is in operation.
• Focus on the travelling path and keep a clear view of it.
• When leaving a forklift, pull the parking brake, lower the forks and neutralize the controls.
• Don’t drive and raise load at the same time
• Don’t make sudden sharp turns
• Don’t brake suddenly when the forklift is loaded.
• Watch out for overhead structures (e.g. pipes & beams)
• Follow traffic management.
• Use rear view mirrors and camera while reversing.
1. Powered Industrial Equipment
Awareness
By: David Pastore
Distribution Department
630-529-5787 davidpastore@yahoo.com
2. Managers and Supervisors have the responsibility to ensure the safety
of their employees and co-workers at all times.
It is also the responsibility that our employees follow the rules for
operating powered industrial equipment safely.
EVERYONE needs to be aware of the working environment especially
when in close contact with powered industrial equipment.
The National Safety Council recommends that all managers take a
“Powered Industrial Equipment” training class. I put together this
presentation to educate ALL EMPLOYEES, so there is an complete
understanding of what to look for when around powered industrial
equipment.
By adhering to these rules, it will provide a safe work environment. It
is everyone’s responsibility to ensure that individuals are operating
powered industrial equipment safely at all times.
Please take the time to look at the following presentation and review
whenever you would like to refresh your understanding of the do’s and
don’ts of operating powered industrial equipment.
4. Breakdown of the 680,400 accidents
90,000 employees injured
100 deaths
Source: Powered industrial truck accidents report through OSHA’s
“First report of serious accidents” 1985-1990
5. Causes of P.I.E. accidents in
percentages
7
Ran off loading dock
12.2 Elevated employee on lift
Struck by falling load 14.4
Struck by PIT 18.8
25.3
Tip over of PIT
0 5 10 15 20 25 30
6. Causes of P.I.E. accidents in
percentages
Faulty powered lift 3.1
Employees overcome by fumes 4.4
P.I.E. struck material 4.4
4.4
Lost control of the P.I.E.
Improper maintenance procedures 6.1
0 1 2 3 4 5 6 7
7. Causes of P.I.E. accidents in
percentages
1 Electrocutions
Improper use of P.I.E. 2.6
Employee fell from P.I.E. 3.1
Unloading unchocked trailer 3.1
0 0.5 1 1.5 2 2.5 3 3.5
10. Benefits of Powered Industrial
Equipment
Assist in the movement of materials
Reduce employee injuries
11. Powered Industrial Equipment
operating abilities and environments
Pedestrians area
Blind spots
Indoors/Outdoors
Narrow aisles
Building columns
Operate 24 hours per day
Turning radius
12. Powered Industrial Equipment
and Pedestrians
Pedestrians contribute to accidents
Pedestrians do not understand stopping distances
Pedestrians try to “beat” P.I.E.
Pedestrians can DIE
13. Methods used to reduce Powered
Industrial Equipment Accidents
Training of drivers
Maintenance of equipment
Managed daily operations
14. Pre Safety Check
A pre-safety check must be performed at the beginning of each shift.
Checklist will be filled out and displayed on all operating vehicles at
all times.
Defects must be reported to supervisor
A “Do Not Operate” tag is placed on vehicle and is taken out of service
until repairs can be made.
All safety check off tags are to be turned in at the end of each shift and
kept for a year .
15. Pre Safety Inspection Tags
Tags must be displayed on vehicle while operating P.I.E.
“Green for go , Red for lock out”.
16. Always wear a Seatbelt! It’s the law!
Always look to see if an operator is wearing a seat belt. If operator is not
wearing a seat belt ask them to please put one on and then report the incident
to their supervisor. Wearing a seat belt is not up to the operator
it’s the law!
17. The rules for unattended vehicles
Never get off vehicle and leave running if your more then 15 feet away or if the vehicle is out of sight.
Never park on an incline.
Never park in front of a door way or exit.
Never park truck on a dock.
Never park in a trailer.
Always park truck in a designated area with attachments at
ground level, shut down controls and set emergency brake.
No! Never leave unattended Yes! Proper placement of No! Never park across dock
vehicle’s parked in aisles. vehicle when not in use. plate or on an incline.
18. 1.Operating P.I.E. in a working environment
Operators must be aware of their working environments. Complacency by
the operator who assumes no one is around can be disastrous.
This picture was taken while the work area was fully staffed!
19. 2.Operating P.I.E. in a working environment
Operators must be aware of their working environments. Complacency by
the operator who assumes no one is around can be disastrous.
This picture was taken a few seconds later than the last slide but at a different angle.
20. 3.Operating vehicle in a working environment
Most accidents take place at shift change and or break time. Operators must
be extremely cautious when operating P.I.E. during these times.
As you can see from the pictures our loading dock is in close proximity
to our employee exit area. Operators should be extremely cautious at
shift time and /or break time.
21. 4. Operating P.I.E. in a working environment
Drive slow.
Avoid spinning vehicle.
Slow down at cross sections , sound horn and proceed with caution.
Make sure pedestrians know you are there and make eye contact.
Slow down at cross sections and then proceed with caution. Make eye
contact letting workers know that you are in their work area.
22. 5.Operating P.I.E. in a working environment
Never drive up to a fixed object to retrieve something.
Never drive up to someone or walk up to P.I.E.
Never let someone walk up to you.
Never drive up to Keep your Never drive up to a
someone or walk distance. fixed object to
up to an operating retrieve something
truck!
23. Driving with or without a load
Drive in reverse when transporting a load that is unstable or blocks view.
Proceed with caution when load is unstable.
Empty attachments should be 4 inches from the floor.
Always go up and down an incline with the load trailing.
Drive in reverse when view is Attachments 4 inches from floor
blocked. when traveling empty
24. Operating P.I.E. in a warehouse environment
Are operators approaching loads correctly?
Are operators raising and lowering loads while stationary?
Are operators aware of their overhead environment?
Are operators performing housekeeping?
Are operators stacking pallets correctly?
Are operators moving in and out of racking environments
cautiously?
Are operators trying to lift more than vehicle can support?
Are operators following all the rules for operating in a storage
environment? no passing, no horse play, no riders and no reaching
out of vehicle.
25. Stacking and unstacking
Always approach head on and square, never
stack or unstack while turning.
Approaching head on Never stack or unstack while
turning P.I.E.
26. Storing or retrieving a pallet from a
rack position
Right way is to line up squarely Wrong way is turning
with rack before lifting or while lifting or lowering.
lowering pallet.
27. Rules of the road
Always follow another P.I.E. by three lengths.
Never pass another moving vehicle.
Avoid wide turns.
Slow down at intersection and blind spots, sound horn, and proceed with
caution.
Keep three truck lengths when
Don’t pass while traveling.
following another operator.
28. Operating P.I.E. on a dock and in and out of trucks
Are operators inspecting trucks before loading or unloading?
Are wheel chocks being used correctly?
Are drivers proceeding with caution when entering and exiting trailers or rail
cars?
Wheels must Locking
mechanism Trailer must Proceed with
be chocked be inspected caution when
must be
engaged for defects loading or
unloading
trailers.
29. Types of Power Walkers at Berlin
We have three types of power walkers at Berlin Industries:
1) Power rider walkers - this is the only walker hat can be ridden.
2) Power walker only.
3) Blue Giant with stabilizer bars which should only be used to remove half
size pallets from press delivery system.
Powered Walker Power Walker Specialized Power
Rider Only Walker
30. Operating powered walkers
correctly
Proper way of Proper way to operate
operating powered powered rider walker.
walker.
31. Oversized pallets
Use extended forks.
Buddy system when loading, unloading and
stacking.
Oversized Use fork Buddy system
pallets extensions
38. This person is to close to the P.I.E.
operator
Losing control
of this roll at
this level could
result in the
death of this
individual
sweeping the
floor.
Note: This picture was
staged in a controlled
situation, the clamp is
not attached to the roll.
42. The End
. The next time you are around
powered industrial equipment keep
and eye open and put “Safety First”.
Thank you for taking the time to view
this presentation.