This document discusses Techeyon Computer Services' data center environmental cleaning services. Regular cleaning is important to prevent dust and other contaminants from accumulating and potentially causing errors or downtime. Techeyon offers a variety of cleaning services tailored to individual clients' needs, including cleaning raised floors and voids, server cabinets, communication racks, and other areas. All work is supervised by certified technicians and aims to maintain cleanroom standards. Maintaining a clean environment is crucial to ensuring optimal operation and performance of data center equipment.

1. 1
Techeyon Computer Services (TCS)
specialists in Data Centre “Environmental IT Services.”
With constant movement of staff, equipment and supplies throughout a computer operations area,
it is inevitable that the room becomes contaminated, due to the natural introduction of dust, dirt and
debris.
If uncontrolled, this contamination can become a problem to the trouble-free operation of the
system by causing errors, malfunctions and eventually costly down time. These contaminants over
time, find their way into most parts of the media subsystem and media. Contamination may not
show an immediate effect upon the performance of data but will penetrate and accumulate silently
until it does.
Sun Microsystems, in their best practices guide, recommends that Computer Rooms are cleaning
on a six monthly cycle.
These contaminants must be removed by a company that is experienced in this specialist field, as
incorrect dust control can disturb these contaminants, releasing them into the voids (causing the
very problems that you are attempting to cure). HEPA filters must be used to remove contaminants
as small as .3 micron (66 times smaller than a typical zinc whisker).
All of our computer room services are tailor made to individual companies requirements.
All Services are supervised on site by a fully certified Comptia A+
technician. All units are fully checked on completion of service. All
works standardized to comply with ISO 14644-1 Part

2. 2
Data Centre Environmental Services
Services Available include:
1.Floor Void / Sub Floor Dust Control
2.Ceiling Void Dust Control
3.Server Cabinets
4.Communication(switch)Racks
5.Light Diffusers
6.Floor Surfaces
7.Static Dissipative Floor finishing
8.UPS Cabinets
9.A/C Units & Ducting
10.Battery Pack Racks
11.Furniture & Wall Mounted Equipment
12.Walls, Baseboards, Doors and windows
Cleanrooms and associated controlled environments, ISO 14644-1 Part 1: Classification of air cleanliness(excerpt from introduction).
Cleanrooms and associated controlled environments provide for the control of airborne particulate contamination to levels appropriate for accomplishing contamination-
sensitive activities. Products and processes that benefit from the control of airborne contamination include those in such industries as aerospace, microelectronics,
pharmaceuticals, medical devices, food, and healthcare.
This part of ISO 14644 assigns ISO classification levels to be used for the specification of air cleanliness in cleanrooms and associated controlled environments. It also
prescribes the standard method of testing as well as the procedure for determining the concentration of airborne particles.
Excerpt

3. 3
Raised floor voids should be cleaned regularily to stop dust migrating to
the servers and control equipment. Desco and ACL anti static fluids are
used to ensure optimum service is delivered.
It is via forced air from the A/C that the majority of dust is circulated
around the room, eventually migrating to the servers and other Kit.
Raised Floors
Contamination by dust dirt and debris will migrate throughout
the sub floor and ceiling voids via the air conditioning.

4. 4
It is of paramount importance that dust is not
allowed to enter the control equipment, where it
can cause system failures due to fans, boards
and components being covered in a blanket of
dust.
Keeping cabinets dust free is an important step
to help ensure optimum working conditions for
server, switch and other Kit enclosed.
Server Cabinets and Comms Racks

5. 5
Other Relevant Areas In a Data Centre
A complete wall to
ceiling service will
ensure that dust is
kept to a minimum in
the room.
A regular service may
save thousands of
dollars in the long run.
Be proactive not
reactive

6. 6
Floor Surface Treatment
An additional treatment with Desco Statguard® Static
Dissipative Cross-Linked Floor Finish will dissipate
static charges as well as limit static charge generation
charges. It also provides a high gloss finish that
resists wear and lasts 12 months or longer.
Statguard® technology eliminates the need for static
control tile or floor mats. It is ideal for clean room and
electronic manufacturing, assembly, and test areas.
It also ensures the floor is a safe walking surface (slip
resistance) under UL Classification.
The floor surface is a magnet for dust and debris.
Keeping the visible surfaces clean is another crucial
area that should be kept in prestine condition

7. 7
We service both the public and private sector, including.......
Banks, Law firms, Manufacturing, Marketing, Government, Schools, Universities, Logistical services & Small Businesses
A few of our Clients

8. 8
Environmental Dust Control
Approximately 80% of dust and dirt that enters food preparation
and storage areas does so on the soles of feet of staff and
customers(Source: 3M) 10% is carried by carts, boxes, produce
and sundries entering the room. The remaining 10% is
airbourne particulates.
The contamination control tiles situated at the entrance storage rooms Etc (pictured
above), prevent up to 90% of dust and dirt from entering the room at ground level.
When installed and maintained properly, the contamination control tile provides
important benefits such as:
• Reduction in the amount of dirt and debris entering the room / area.
• Collects and retains contamination over a range of particle sizes from 2 to 10
microns
• Removed particles are contained within the mat not allowing them to become
airborne.
Stop dirt at the door with a Techeyon Contamination Control Mat.
Also referred to as sticky/ tacky mats because the surface traps dirt as foot traffic or
wheels pass over the tacky surface of the mat.
Quality adhesive coating ensures maximum performance on each sticky mat sheet.
Peel off daily to expose a fresh sheet.
Numbered tabs indicate the number of remaining sheets left on your sticky mat.
Each mats lasts 30 days (one month).