Danosa Acoustic Insulation
•
0 likes•61 views
DANOSA acoustic insulation systems provide complete solutions to improve acoustic quality inside buildings. The systems are designed to reduce transmission of airborne and structural noises between rooms by insulating the entire "acoustic box" including floors, walls, ceilings, pipes, and drains. The portfolio includes multilayer systems capable of insulating over the entire acoustic frequency range as well as absorbing impulse noises.
Report
Share
Report
Share
Download to read offline
Recommended
Sound insulation
This document discusses sound insulation in buildings. It defines noise and sound insulation, and explains that sound insulation materials work to reduce transmission of sound through walls, floors, and partitions, while sound absorbers reduce reflection. General considerations for sound insulation include locating buildings away from noise sources, planning room layouts, using resilient flooring, and installing expansion joints. Common sound insulating materials are rigid materials like masonry, porous materials, and flexible porous materials like felt and mineral wool. Vertical barriers like walls and partitions can be insulated using techniques like cavity wall construction, double walls, and porous partition walls. Noise control in residential buildings involves siting away from noise, using landscaping, limiting hard surfaces, false ceilings, isol
Sound insulation experiment
The document summarizes an experiment that tested the effectiveness of different common materials for sound insulation. The materials tested included expanded polystyrene foam, stainless steel, wood, and paper. The experiment measured the sound reduction index and transmitted coefficient of each material at different frequencies. The results showed that stainless steel was the most effective at sound insulation, while expanded polystyrene foam and paper were the least effective. Common soundproofing techniques for homes using different materials were also discussed.
sharad mishra,envirotech systems,acoustic doors, acoustic metal doors,acousti...
sharad mishra,envirotech systems,acoustic doors, acoustic metal doors,acoustic wooden doors,acoustic sound proof door,acoustic enclose doors, audio matrix booth door, doors, sliding folding doors, partition doors fire doors
Alkorgreenroofgarden
The document discusses Renolit's AlkorGreen roofing system and the benefits of green roofs. It provides background on Renolit's 30+ years of experience and describes the key components of the AlkorGreen system, including waterproofing membranes, drainage layers, and sedum/substrate layers. It then outlines the different types of extensive, semi-intensive, and intensive green roofs and their characteristics. Finally, it summarizes the environmental, economic, and development benefits of green roofs, such as reduced energy costs, increased roof lifespan, stormwater management, and aesthetic value.
Sound absorbing material
This document discusses using rock wool as a sound absorbing material in floors. It provides background on building acoustics and defines rock wool. It describes the manufacturing process for rock wool and its properties as a thermal and acoustic insulator. Key points covered include using rock wool bats between floor joists, its fire resistance, recycled content, and importance for both thermal and sound insulation.
Materials and Usage of Treatment for Thermal Insulation
Thermal insulation reduces heat transfer between objects and retains heat inside buildings. Various materials like fiberglass, rock wool, and polystyrene foam are used to insulate roofs, walls, windows, and other building elements. Proper insulation maintains indoor comfort, reduces energy costs, and lessens heat gain/loss. Common insulation methods include cavity walls, air gaps, reflective barriers, and double or triple glazing. Factors like costs, required insulation levels, and energy savings determine the best insulation approach for a building.
Development of Sound Absorption Materials using Natural Fibers for Automobile...
Development of Sound Absorption Materials using Natural Fibers for Automobile...Sricharan Ananthkumar
Based on the literature review, it was observed that natural fibre based fibre mats have potential application for automotive interior sound absorption. The natural fibre based materials also offer benefits such as bio-degradability. Acoustical Details (Sound Isolation)
Detail Slides on MATERIALS , DETAILS and TECHNIQUES
Architectural Techniques for installing acoustical material
Recommended
Sound insulation
This document discusses sound insulation in buildings. It defines noise and sound insulation, and explains that sound insulation materials work to reduce transmission of sound through walls, floors, and partitions, while sound absorbers reduce reflection. General considerations for sound insulation include locating buildings away from noise sources, planning room layouts, using resilient flooring, and installing expansion joints. Common sound insulating materials are rigid materials like masonry, porous materials, and flexible porous materials like felt and mineral wool. Vertical barriers like walls and partitions can be insulated using techniques like cavity wall construction, double walls, and porous partition walls. Noise control in residential buildings involves siting away from noise, using landscaping, limiting hard surfaces, false ceilings, isol
Sound insulation experiment
The document summarizes an experiment that tested the effectiveness of different common materials for sound insulation. The materials tested included expanded polystyrene foam, stainless steel, wood, and paper. The experiment measured the sound reduction index and transmitted coefficient of each material at different frequencies. The results showed that stainless steel was the most effective at sound insulation, while expanded polystyrene foam and paper were the least effective. Common soundproofing techniques for homes using different materials were also discussed.
sharad mishra,envirotech systems,acoustic doors, acoustic metal doors,acousti...
sharad mishra,envirotech systems,acoustic doors, acoustic metal doors,acoustic wooden doors,acoustic sound proof door,acoustic enclose doors, audio matrix booth door, doors, sliding folding doors, partition doors fire doors
Alkorgreenroofgarden
The document discusses Renolit's AlkorGreen roofing system and the benefits of green roofs. It provides background on Renolit's 30+ years of experience and describes the key components of the AlkorGreen system, including waterproofing membranes, drainage layers, and sedum/substrate layers. It then outlines the different types of extensive, semi-intensive, and intensive green roofs and their characteristics. Finally, it summarizes the environmental, economic, and development benefits of green roofs, such as reduced energy costs, increased roof lifespan, stormwater management, and aesthetic value.
Sound absorbing material
This document discusses using rock wool as a sound absorbing material in floors. It provides background on building acoustics and defines rock wool. It describes the manufacturing process for rock wool and its properties as a thermal and acoustic insulator. Key points covered include using rock wool bats between floor joists, its fire resistance, recycled content, and importance for both thermal and sound insulation.
Materials and Usage of Treatment for Thermal Insulation
Thermal insulation reduces heat transfer between objects and retains heat inside buildings. Various materials like fiberglass, rock wool, and polystyrene foam are used to insulate roofs, walls, windows, and other building elements. Proper insulation maintains indoor comfort, reduces energy costs, and lessens heat gain/loss. Common insulation methods include cavity walls, air gaps, reflective barriers, and double or triple glazing. Factors like costs, required insulation levels, and energy savings determine the best insulation approach for a building.
Development of Sound Absorption Materials using Natural Fibers for Automobile...
Development of Sound Absorption Materials using Natural Fibers for Automobile...Sricharan Ananthkumar
Based on the literature review, it was observed that natural fibre based fibre mats have potential application for automotive interior sound absorption. The natural fibre based materials also offer benefits such as bio-degradability. Acoustical Details (Sound Isolation)
Detail Slides on MATERIALS , DETAILS and TECHNIQUES
Architectural Techniques for installing acoustical material
Sound insulation
Sound insulation is the process of soundproofing an enclosed space to prevent sound from filtering in or out. Various materials can be used for sound insulation like fiberglass wool, rock wool, glass wool, mass loaded vinyl, cork, green glue and foam panels. These materials work by absorbing, reflecting or damping sound vibrations. Sound insulation is important in environments like recording studios, homes and offices to reduce noise transfer between spaces and for human health and safety.
Sound insulation of buildings(10 10-'15)
This document discusses sound insulation in buildings. It defines noise and describes how noise is transmitted through air, building structures, and structural members. It differentiates between sound insulation and sound absorption. Acceptable noise levels are outlined for different building types like hospitals, classrooms, and residences. Construction methods for sound insulation are described, including walls, floors, windows, doors, and machine mounting. Walls can be made of rigid, porous, or double materials. Floors can use resilient surfaces or floating constructions. Windows and doors work best when air tight. Proper placement of buildings and isolation of noise sources are also important for sound insulation.
New microsoft power point presentation
Soundproof curtains are a flexible and economical method for noise reduction in industrial and manufacturing applications. They can be used to create sound barrier walls, partial barriers, and machine enclosures. The degree of sound absorption depends on factors like the fabric weight, depth between the curtain and wall, and pleating. Acoustical curtains both block noise and absorb sounds using a quilted fiberglass blanket with a 1lb noise barrier septum. Envirotech Systems offers insulating ceiling tiles that provide strength, durability, and sound attenuation while remaining affordable. Their mineral fiber tiles have good fire resistance and absorb 41dB of sound.
Acostic Barriers
The proposed materials are intended to be light structures, recyclable or degradable and with high noise reduction efficiency, being proper in buildings structures, noise barrier structures and automotive components.
Key words: acoustic, composite, noise control, absorption, Kundt’s tube, noise barriers
Porta Cabin Presentation
The document describes the materials and specifications for roof and wall cladding, partitions, fire rating, flashing, doors, windows, and electrical components of prefabricated building modules. The roof and wall cladding and partitions have an outer layer of 0.7mm thick galvanized iron coated with white plastic, and insulation of 80mm or 50mm thick polyurethane foam. Doors and windows are also specified. The materials and construction meet appropriate fire and insulation standards. Electrical works include embedded conduits and junction boxes. The modules are single kitchen and bathroom units produced by AMCO Engineering in Rawalpindi, Pakistan.
Water proofing compound
Waterproofing compounds are materials used to render surfaces impermeable to water. Common compounds include neoprene, butyl, EPDM, PVC, and polyurethane. Neoprene is a synthetic rubber resistant to heat, chemicals, and weathering. Butyl rubber was developed in the 1930s and is used in fuel lines and tires due to its impermeability. EPDM is a lightweight rubber membrane used for waterproofing that is flexible and withstands heat and weathering. PVC and polyurethane membranes are also used for roofing and provide strength, flexibility, and resistance to weathering for decades. The major causes of waterproofing failure are poor workmanship and surface preparation.
Sound absorption and sound absorbers
The property of surface by which sound energy (kinetic energy) is converted into other form of energy, generally heat energy (due to friction) and get absorbed.
There is no royal road for making a particular room acoustically good. It mainly depends on the ideas of the engineer or the Architect. Each case is to be studied separately and after proper thinking and calculations, suitable materials may be specified.
Laminated doors manufacturer and exporter company in india
Gujcon is an ISO certified wooden doors manufacturing company in India founded in 1988. It produces high quality and internationally standard wooden doors using advanced German and Dutch machinery. Key products include eco-friendly eco green doors, fire rated doors, FRP doors, laminated doors, solid wood doors, and veneer doors. The company collaborates with international brands like Masonite and uses technologies from countries like Germany, Netherlands, and South Korea to manufacture doors.
Office textiles
This document discusses different types of office textiles including their fibers, fabrics, and purposes. It describes carpets for insulating feet and reducing sound, curtains for blocking light and drafts, window blinds made of materials like wood and fabric, tablecloths for protecting tables, cubicles for isolating workers, wall coverings for noise reduction, and rugs for decoration, clean areas, and insulation. The document provides details on common fibers like polyester, nylon, cotton, and wool and fabrication methods including weaving, knitting, and non-woven construction.
Some Acoustics Material
ACOUSTICS PLASTERBOARD
ACOUSTICS PULP (PLASTER)
ACOUSTICS TILES (PANELS)
FIBREGLASS BLANKET
PLASTICS PANELS
Wooden doors manufacturer & supplier company in india gujcon surat
Gujcon is one of the Best Wooden Doors Manufacturing, Supplier & Exporter Company in India. In this PPT we have introduced our company & our products of Doors
ppt of thermal insulating materials
Thermal insulation is used in air conditioning systems to reduce heat transfer. It prevents heat gain or loss through piping and helps inhibit condensation. Insulation materials include fiberglass, mineral wool, cellulose, polyurethane foam, and polystyrene. Each material has advantages - fiberglass is cheap but requires safe handling; cellulose is fire resistant and eco-friendly; and polyurethane foam performs well overall but has environmental impacts. The document evaluates the properties and applications of common insulation materials.
Building insulation
Building insulation is used to provide thermal, acoustic, fire, and impact insulation in buildings. It works by reducing heat transfer to help maintain comfortable temperatures. Common places for insulation include walls, attics, basements, floors, and ducts. Insulation saves energy, cuts operating costs, and improves occupant comfort by creating a more uniform temperature environment. The type of insulation used depends on factors like a building's needs and the material's health and environmental impacts.
ANNEX
ANNEX GLOBAL is a construction materials trading company based in Hyderabad, India that was established in 2015. The company imports and sells a wide range of products including gypsum boards, PVC false ceilings, doors, and other building materials. Gypsum board is a type of panel made of a gypsum core and paper facing that is used for interior walls and ceilings. It offers advantages such as ease of installation, fire resistance, sound isolation, durability, economy, and versatility. ANNEX GLOBAL provides high quality gypsum boards in various colors, patterns, and designs to add value to building interiors.
Ecotone Systems Private Limited
Ecotone Systems is India's leading manufacturer of acoustic products for noise control. It pursues market leadership through customer focus, quality products, and innovation. The company produces a wide range of acoustic solutions, including movable walls, sound-absorbing panels, and hanging baffles. Its products provide noise control and optimize space usage while minimizing environmental impact through sustainable designs.
Thermal insulation materials
This document discusses insulation materials and their properties. It defines insulation and divides it into three temperature ranges: low, intermediate, and high. It describes the generic types of insulation as fibrous, cellular, or granular and the forms they take such as boards, blankets, or foams. The document lists important thermal, mechanical, and chemical properties to consider when selecting insulation materials. These include thermal conductivity, fire resistance, moisture resistance, and more. It provides an overview of major insulation materials including calcium silicate, fiberglass, mineral wool, elastomeric foam and others.
Acoustic materials
This document discusses various types of acoustic materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common materials like acoustic foam panels, fabric wrapped panels, and ceiling tiles. Sound absorbers are porous materials that eliminate sound reflections, while diffusers scatter sound waves. Barrier materials reduce airborne sound transmission. Prices for different acoustic materials range from Rs. 100-2500 per square foot depending on the type, thickness, and material.
Acoustic & Materials
“a science that deals with the production, control, transmission, reception, and effects of sound.”
it is the science of controlling sound within buildings.
GT Acoustical-material for sound management pptx
Acoustic System Material for Sound management at the organisations or theatres.
Acoustical materials
This document discusses various types of acoustical materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common sound absorbing materials like acoustical foam panels, fabric-wrapped panels, wall coverings, ceiling tiles, and baffles. These materials use porous materials like foam, fiberglass, and fabrics to absorb sound waves. The document also briefly mentions sound diffusers which scatter sound reflections instead of absorbing them.
Acoustics and design of movie theatre
The document discusses the acoustics considerations for designing movie theatres. It outlines that acoustics involves the study of sound and how to achieve good acoustics in buildings. For theatres, important aspects include flooring, wall and ceiling finishes, and furniture layout. The document then provides details on acoustic flooring systems, wall fabrics and panels, ceiling tiles, and theatre seating options that help enhance sound quality. It also presents a case study of the acoustics design for a multiplex theatre in Gurgaon, India, covering its structure, plan, section details, and electrical, lighting and fire safety systems.
Arpan
The document provides details about Ravindralaya Auditorium in Lucknow, India. It describes the auditorium's capacity of 777 people, stage dimensions of 40ft x 40ft, and 14 rows of ground seating and 10 rows of balcony seating. Acoustical materials used include wooden wall panels, plastered brick walls, and different ceiling types. The auditorium was built in 1964 and is used for cultural, political and entertainment events.
More Related Content
What's hot
Sound insulation
Sound insulation is the process of soundproofing an enclosed space to prevent sound from filtering in or out. Various materials can be used for sound insulation like fiberglass wool, rock wool, glass wool, mass loaded vinyl, cork, green glue and foam panels. These materials work by absorbing, reflecting or damping sound vibrations. Sound insulation is important in environments like recording studios, homes and offices to reduce noise transfer between spaces and for human health and safety.
Sound insulation of buildings(10 10-'15)
This document discusses sound insulation in buildings. It defines noise and describes how noise is transmitted through air, building structures, and structural members. It differentiates between sound insulation and sound absorption. Acceptable noise levels are outlined for different building types like hospitals, classrooms, and residences. Construction methods for sound insulation are described, including walls, floors, windows, doors, and machine mounting. Walls can be made of rigid, porous, or double materials. Floors can use resilient surfaces or floating constructions. Windows and doors work best when air tight. Proper placement of buildings and isolation of noise sources are also important for sound insulation.
New microsoft power point presentation
Soundproof curtains are a flexible and economical method for noise reduction in industrial and manufacturing applications. They can be used to create sound barrier walls, partial barriers, and machine enclosures. The degree of sound absorption depends on factors like the fabric weight, depth between the curtain and wall, and pleating. Acoustical curtains both block noise and absorb sounds using a quilted fiberglass blanket with a 1lb noise barrier septum. Envirotech Systems offers insulating ceiling tiles that provide strength, durability, and sound attenuation while remaining affordable. Their mineral fiber tiles have good fire resistance and absorb 41dB of sound.
Acostic Barriers
The proposed materials are intended to be light structures, recyclable or degradable and with high noise reduction efficiency, being proper in buildings structures, noise barrier structures and automotive components.
Key words: acoustic, composite, noise control, absorption, Kundt’s tube, noise barriers
Porta Cabin Presentation
The document describes the materials and specifications for roof and wall cladding, partitions, fire rating, flashing, doors, windows, and electrical components of prefabricated building modules. The roof and wall cladding and partitions have an outer layer of 0.7mm thick galvanized iron coated with white plastic, and insulation of 80mm or 50mm thick polyurethane foam. Doors and windows are also specified. The materials and construction meet appropriate fire and insulation standards. Electrical works include embedded conduits and junction boxes. The modules are single kitchen and bathroom units produced by AMCO Engineering in Rawalpindi, Pakistan.
Water proofing compound
Waterproofing compounds are materials used to render surfaces impermeable to water. Common compounds include neoprene, butyl, EPDM, PVC, and polyurethane. Neoprene is a synthetic rubber resistant to heat, chemicals, and weathering. Butyl rubber was developed in the 1930s and is used in fuel lines and tires due to its impermeability. EPDM is a lightweight rubber membrane used for waterproofing that is flexible and withstands heat and weathering. PVC and polyurethane membranes are also used for roofing and provide strength, flexibility, and resistance to weathering for decades. The major causes of waterproofing failure are poor workmanship and surface preparation.
Sound absorption and sound absorbers
The property of surface by which sound energy (kinetic energy) is converted into other form of energy, generally heat energy (due to friction) and get absorbed.
There is no royal road for making a particular room acoustically good. It mainly depends on the ideas of the engineer or the Architect. Each case is to be studied separately and after proper thinking and calculations, suitable materials may be specified.
Laminated doors manufacturer and exporter company in india
Gujcon is an ISO certified wooden doors manufacturing company in India founded in 1988. It produces high quality and internationally standard wooden doors using advanced German and Dutch machinery. Key products include eco-friendly eco green doors, fire rated doors, FRP doors, laminated doors, solid wood doors, and veneer doors. The company collaborates with international brands like Masonite and uses technologies from countries like Germany, Netherlands, and South Korea to manufacture doors.
Office textiles
This document discusses different types of office textiles including their fibers, fabrics, and purposes. It describes carpets for insulating feet and reducing sound, curtains for blocking light and drafts, window blinds made of materials like wood and fabric, tablecloths for protecting tables, cubicles for isolating workers, wall coverings for noise reduction, and rugs for decoration, clean areas, and insulation. The document provides details on common fibers like polyester, nylon, cotton, and wool and fabrication methods including weaving, knitting, and non-woven construction.
Some Acoustics Material
ACOUSTICS PLASTERBOARD
ACOUSTICS PULP (PLASTER)
ACOUSTICS TILES (PANELS)
FIBREGLASS BLANKET
PLASTICS PANELS
Wooden doors manufacturer & supplier company in india gujcon surat
Gujcon is one of the Best Wooden Doors Manufacturing, Supplier & Exporter Company in India. In this PPT we have introduced our company & our products of Doors
ppt of thermal insulating materials
Thermal insulation is used in air conditioning systems to reduce heat transfer. It prevents heat gain or loss through piping and helps inhibit condensation. Insulation materials include fiberglass, mineral wool, cellulose, polyurethane foam, and polystyrene. Each material has advantages - fiberglass is cheap but requires safe handling; cellulose is fire resistant and eco-friendly; and polyurethane foam performs well overall but has environmental impacts. The document evaluates the properties and applications of common insulation materials.
Building insulation
Building insulation is used to provide thermal, acoustic, fire, and impact insulation in buildings. It works by reducing heat transfer to help maintain comfortable temperatures. Common places for insulation include walls, attics, basements, floors, and ducts. Insulation saves energy, cuts operating costs, and improves occupant comfort by creating a more uniform temperature environment. The type of insulation used depends on factors like a building's needs and the material's health and environmental impacts.
ANNEX
ANNEX GLOBAL is a construction materials trading company based in Hyderabad, India that was established in 2015. The company imports and sells a wide range of products including gypsum boards, PVC false ceilings, doors, and other building materials. Gypsum board is a type of panel made of a gypsum core and paper facing that is used for interior walls and ceilings. It offers advantages such as ease of installation, fire resistance, sound isolation, durability, economy, and versatility. ANNEX GLOBAL provides high quality gypsum boards in various colors, patterns, and designs to add value to building interiors.
Ecotone Systems Private Limited
Ecotone Systems is India's leading manufacturer of acoustic products for noise control. It pursues market leadership through customer focus, quality products, and innovation. The company produces a wide range of acoustic solutions, including movable walls, sound-absorbing panels, and hanging baffles. Its products provide noise control and optimize space usage while minimizing environmental impact through sustainable designs.
Thermal insulation materials
This document discusses insulation materials and their properties. It defines insulation and divides it into three temperature ranges: low, intermediate, and high. It describes the generic types of insulation as fibrous, cellular, or granular and the forms they take such as boards, blankets, or foams. The document lists important thermal, mechanical, and chemical properties to consider when selecting insulation materials. These include thermal conductivity, fire resistance, moisture resistance, and more. It provides an overview of major insulation materials including calcium silicate, fiberglass, mineral wool, elastomeric foam and others.
Acoustic materials
This document discusses various types of acoustic materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common materials like acoustic foam panels, fabric wrapped panels, and ceiling tiles. Sound absorbers are porous materials that eliminate sound reflections, while diffusers scatter sound waves. Barrier materials reduce airborne sound transmission. Prices for different acoustic materials range from Rs. 100-2500 per square foot depending on the type, thickness, and material.
What's hot (17)
Laminated doors manufacturer and exporter company in india
Laminated doors manufacturer and exporter company in india
Wooden doors manufacturer & supplier company in india gujcon surat
Wooden doors manufacturer & supplier company in india gujcon surat
Similar to Danosa Acoustic Insulation
Acoustic & Materials
“a science that deals with the production, control, transmission, reception, and effects of sound.”
it is the science of controlling sound within buildings.
GT Acoustical-material for sound management pptx
Acoustic System Material for Sound management at the organisations or theatres.
Acoustical materials
This document discusses various types of acoustical materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common sound absorbing materials like acoustical foam panels, fabric-wrapped panels, wall coverings, ceiling tiles, and baffles. These materials use porous materials like foam, fiberglass, and fabrics to absorb sound waves. The document also briefly mentions sound diffusers which scatter sound reflections instead of absorbing them.
Acoustics and design of movie theatre
The document discusses the acoustics considerations for designing movie theatres. It outlines that acoustics involves the study of sound and how to achieve good acoustics in buildings. For theatres, important aspects include flooring, wall and ceiling finishes, and furniture layout. The document then provides details on acoustic flooring systems, wall fabrics and panels, ceiling tiles, and theatre seating options that help enhance sound quality. It also presents a case study of the acoustics design for a multiplex theatre in Gurgaon, India, covering its structure, plan, section details, and electrical, lighting and fire safety systems.
Arpan
The document provides details about Ravindralaya Auditorium in Lucknow, India. It describes the auditorium's capacity of 777 people, stage dimensions of 40ft x 40ft, and 14 rows of ground seating and 10 rows of balcony seating. Acoustical materials used include wooden wall panels, plastered brick walls, and different ceiling types. The auditorium was built in 1964 and is used for cultural, political and entertainment events.
Ach paneles sandwich panels mineral wool
In Paneles ACH we have a wide knowledge in fire resistance and acoustic solutions, industrial enclosures and refrigeration systems. In this presentation you will be able to learn a little bit more about our products: mineral wool panels, acoustic screens and barriers, PUR-PIR polyhuretane foam panel, C and Z Profiles, wood panels
Thomas Memphis Presentation
he ROCKWOOL™ provided event at the Marshall County Facility and The Peabody Memphis; hosted by Todd Kimmel along with Keith P. Nelson and presented by ROCKWOOL™.
Thank you for your attendance, participation, and discussions, at the Cladding Summit. We sincerely hope that you found the presentations informative and engaging.
ROCKWOOL is committed to the continued development of high value educational presentations and seminars. Your thoughts and feedback will help to improve our efforts to deliver more value for you and future participants.
Acoustical materials
Acoustical materials are designed to absorb sound that would otherwise be reflected. Foam panels and tiles made from materials like polyurethane and glass fiber are widely used as sound absorbers. They are applied in walls, ceilings and as freestanding panels. Fabric wrapped panels and acoustic wall coverings provide sound absorption while also decorating interior spaces. Baffles and banners hung from ceilings are an economical way to reduce reverberation in large spaces like auditoriums and gymnasiums. Porous materials like glass fiber and open cell foams absorb sound through both solid and gas phases as sound propagates through their structure.
Acoustic material
This document discusses various acoustic materials used for sound absorption, diffusion, and noise control. It provides details on stackable foam panels, fabric wrapped panels, ceiling clouds, fiberglass blankets and rolls, pyramidal and quadratic diffusers, and acoustic barriers. The materials discussed are suitable for a variety of spaces including recording studios, theaters, offices, homes and more. They help reduce reverberation, echoes, and noise in an aesthetically pleasing way while also being durable and fire resistant.
Ecotone Grooved Panels and Acoustical Ceiling Tiles
This document provides information about acoustic grooved panels manufactured by Ecotone Systems. Key details include:
- The panels have grooves and holes to achieve a high acoustic absorption coefficient and aesthetic appearance.
- Specifications include a thickness of 16mm, dimensions of 2440x575mm, and materials of pre-laminated high density MDF board.
- Ecotone Systems is an ISO 9001:2015 certified company that designs and manufactures acoustic panels for walls, ceilings, and furniture to provide noise control.
Soundtect 3-D Brochure 2016
Soundtect develops acoustic wall and ceiling panels that not only address reverberation issues but also add design features to rooms. Their panels are made from 70% recycled materials and can achieve NRC ratings up to 1.0. They have several panel designs like Wave, Cubism, and Forest that provide acoustic absorption while also having eye-catching visual patterns. Soundtect provides information on the performance, specifications, installation, and care of their different acoustic panel products.
Sontext catalogue 2020
Sontext manufactures and installs a range of decorative and acoustic wall and ceiling products. The company was established in 1999 and has supplied products for projects including performing arts centers, sports complexes, recording studios, and boardrooms. Sontext offers sound absorbing panels and ceiling tiles to reduce reverberation. Their flagship product is the Serenity fabric wall and ceiling panel, which uses a fabric covering to provide acoustic absorption while allowing for design flexibility. The panels have been tested to reduce noise and can be installed using various methods like suspended ceiling grids or wall mounting systems.
Sontext Catalogue 2023.pdf
Sontext manufacture and market a wide range of acoustic panels, to reduce noise and improve sound quality. Available in the Middle East, UK and Ireland, Australia, and Asia.
Acoustical technology
This document discusses various types of acoustical materials used to control sound. It describes sound absorbers like acoustical foam panels, fabric wrapped panels, and ceiling tiles that are used to eliminate sound reflections and reduce reverberation. These products are used in recording studios, broadcast facilities, and other commercial and industrial spaces. The document also provides details on the construction and specifications of one such acoustical wall panel.
Acoustic material market survey.pptx
The document discusses different types of acoustic materials used for noise control, including sound absorbers, diffusers, barriers, and reflectors. It provides examples of common materials for each type, such as acoustic foam panels, fabric wrapped panels, and ceiling tiles for absorbers; pyramidal and quadratic diffusers for diffusers; and mass loaded vinyl, metal sheet barriers, and sound curtains for barriers. Price ranges and applications are provided for selected materials.
Architectural acoustics.pptx
Architectural acoustics involves designing buildings to control noise and achieve good speech intelligibility or enhance music quality. Site planning techniques like increasing distance from noise sources, using noise barriers, and orienting buildings away from highways can reduce noise impacts on residential developments. Architectural design features like single-story homes, courtyards, and placing less sensitive rooms nearest noise sources can also reduce interior noise levels. Effective noise barriers include earth berms, walls, fences, and dense plantings which block the line of sight between noise sources and receivers.
Sound insulation
This document discusses sound insulation and soundproofing. It defines key terms like sound, decibel, and reverberation. Sound insulation refers to reducing sound transmission through building elements like walls and floors. Different materials have varying abilities to absorb or block sound transmission. Common sound insulating materials include glass/rock wool, foamed plastics, quiet batts, and studio foam. Proper room arrangement, solid walls, planning for single-story structures, balcony placement, and courtyards can help reduce unwanted noise in buildings. Mass and rigidity help materials resist sound, while openings decrease sound blocking ability.
Soundtect 3-D brochure 2016
Soundtect produces acoustic wall and ceiling panels that address reverberation issues while adding design features to rooms. The panels are made from 70% recycled materials and have performance levels up to 1.0 NRC. They come in visually appealing patterns that balance acoustic function with design. Soundtect offers panels with various designs, colors, and specifications that can be used to enhance both commercial and residential spaces acoustically and aesthetically.
Acoustic material market survey.pdf
The document discusses various types of acoustic materials used for soundproofing, including sound absorbers, diffusers, barriers, and reflectors. It provides examples of common materials for each type such as acoustic foam panels, fabric wrapped panels, ceiling tiles, and mineral wool rolls for absorbers. For diffusers it mentions pyramidal, quadratic, and polycylindrical styles. Barriers include mass loaded vinyl, composite foams, and metal sheet curtains. Price ranges and specifications are given for many products.
Similar to Danosa Acoustic Insulation (20)
Ecotone Grooved Panels and Acoustical Ceiling Tiles
Ecotone Grooved Panels and Acoustical Ceiling Tiles
Recently uploaded
2024 Slides: Sales Productivity: A Deep Dive into Daily Success
Slides from the Demandbase customer lab on Sales Productivity
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA ...
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN
ChartMogul Sales Deck Example - SaaS payment analytics
Chart Mogul Sales Deck for example purposes only.
Cold Call Campaigns: Strategies for Success
"Cold Call Campaigns Success visually represent data and information related to the effectiveness of cold calling in sales and marketing strategies. These graphics use a combination of charts, graphs, and illustrations to convey key insights and statistics in a concise and engaging manner.
The infographics may include data on conversion rates, lead generation, call-to-sale ratios, and other metrics to showcase the impact of cold calling on business growth. They can also highlight best practices, tips, and strategies for optimizing cold call campaigns to improve success rates.
By presenting complex information in a visually appealing format, these infographics make it easier for viewers to understand and digest the content quickly. This makes them an effective tool for businesses looking to communicate the benefits of cold calling and its role in driving sales success.
Overall, infographics on Cold Call Campaigns Success serve as a valuable resource for sales professionals, marketers, and business owners seeking to enhance their cold calling strategies and achieve greater success in their campaigns.
Recently uploaded (7)
2024 Slides: Sales Productivity: A Deep Dive into Daily Success
2024 Slides: Sales Productivity: A Deep Dive into Daily Success
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA ...
8328958814SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA ...
ChartMogul Sales Deck Example - SaaS payment analytics
ChartMogul Sales Deck Example - SaaS payment analytics
Danosa Acoustic Insulation
- 1. DANOSA ACOUSTIC INSULATION SYSTEMS are complete solutions designed to achieve proper acoustic quality inside buildings. All products comprising the acoustic box of the premis- es to be insulated are designed to reduce or prevent the transmission of airborne and structural noises between the various rooms in a building. ACOUSTIC INSULATION COMPLETE SOLUTION DESIGNED TO IMPROVE ACOUSTIC QUALITY INSIDE BUILDINGS
- 2. COMPLETE SOLUTION ACOUSTIC INSULATION ADVANTAGES: • Multilayer systems capable of insulating acoustically over the entire range of acoustic frequencies. • Systems capable of acoustically insulating impulse noises. • Systems for preventing acoustic bridges in pipes and drainpipes. • Systems designed to function as floating boxes inside the premises. • Solutions with acoustic materials that absorb airborne noises. • Solutions using materials with acoustic mass for attenuating the resonance of light-weight elements. • Solutions for preventing impact noise. • Self-adhesive products for easy application. • Resale sizes appropriate for all types of applications. • Systems tested and evaluated by certified European laboratories. • System technically evaluated by independent European organisations. APPLICATIONS: Types of buildings: • Buildings for public or private residential use. • Health facilities such as hospitals and clinics. • Teaching facilities such as schools, day care centres and universities. • Administrative buildings and office spaces. • Public buildings such as shopping centres and parking facilities. • Commercial premises such as night clubs, gyms and music studios. For more information, visit our website at www.danosa.com or contact one of our technical advisers at +34 949 88 82 10 or danosa@danosa.com D.L.GU188-2015 Application Acoustic insulation Product Description Value (dB) Floors Absorber IMPACTODAN® Flexible sheet of chemically cross-linked, closed-cell polyethylene sheet. ΔL 18-27 Rw 54 - 66 Floors Absorbent and anti-res- onant acoustic material FONODAN® 900 A two-layer material made of a self-adhesive, high-density membrane and a chemically cross-linked polyethylene. ΔRw 4 - 5 Δ Ln 20 - 24 Floors Absorber CONFORDAN® Flexible sheet chemically cross-linked polyethylene closed cell coated with a film of aluminized plastic. Δ Ln 16-24 Walls and Ceilings Anti-resonant acoustic material M.A.D 4 High-density bitumen sheet covered on both exterior sides with a high-quality polyethylene film. ΔRw 4 - 6 Anti-resonant acoustic material Synthetic M.A.D High-density EPDM sheet ΔRw 3 - 5 Low and medium frequencies ACUSTIDAN® Two-layer product composed of a high-density bitumen sheet and an absorbent material made of cotton fibre and recycled cloth. Rw 39 - 54 Low, medium and high frequencies DANOFON® Two-layer product composed of a high-density bitumen sheet and an absorbent material made of cotton fibre and recycled cloth. Rw 48 - 63 Medium-, high- and low-frequency impulse noise SONODAN® PLUS SELF-ADHESIVE Multilayer product composed of cross-linked polyethylene, a double, high-densi- ty bitumen sheet and a rockwool absorbent panel. Rw 52 - 67 Medium and high frequencies ROCDAN® 231 Flexible, light panel of mineral wool. Rw 34 - 54 Metallic wall profiles Absorbent and anti-res- onant acoustic material FONODAN® 50 A two-layer material made of a self-adhesive, high-density membrane and a chemically cross-linked polyethylene. ΔRw 3 - 4 Pipes Absorbent and anti-res- onant acoustic material FONODAN® BJ A two-layer material made of a self-adhesive, high-density membrane and a chemically cross-linked polyethylene. ILsingle 12 ILdoble 17 FONODAN® 900 IMPACTODAN® CONFORDAN® FONODAN® 50 ROCDAN® 231 PARQUET REINFORCED MORTAR BASE ACUSTIDAN® M.A.D. FONODAN® BJ