8 40-cs-fg-ep-series
•
0 likes•54 views
This document provides product data on a line of calcium sulfonate thickened greases certified for incidental food contact. The greases are NSF H-1 registered and comply with FDA regulations, offering corrosion protection and resistance to water washout. They are suitable for use in various food processing equipment and are available in drums and pails in different viscosity grades.
Report
Share
Report
Share
Download to read offline
Recommended
Tds cassida fluid hf series eng (1)
CASSIDA FLUID HF series are synthetic hydraulic fluids developed for food manufacturing machinery. They are carefully blended synthetic fluids and additives that meet stringent food industry requirements. The fluids are NSF certified under ISO 21469 and registered as NSF H1 for incidental food contact. They provide good anti-wear performance and protection against corrosion to minimize maintenance costs while being compatible with seals and gaskets.
Tds cassida grease md 2 eng
CASSIDA GREASE MD 2 is a high performance silicone grease developed for lubricating taps, valves, and fittings with EPDM seals in food and beverage processing equipment. It is resistant to hot water, steam, and disinfectants. It is NSF H1 registered and produced according to quality and hygiene standards for the food industry. CASSIDA GREASE MD 2 is recommended for lubricating various taps, meters, and fittings used for water and drinks.
TDS CASSIDA GREASE LTS 1
CASSIDA GREASE LTS 1 is a high performance, low temperature grease specially formulated for food and beverage processing equipment. It is NSF H1 and ISO 21469 certified and made according to quality and hygiene standards. CASSIDA GREASE LTS 1 has excellent low temperature performance down to -50°C, good water resistance and oxidation stability, and prevents corrosion while providing good adhesion. It has a neutral odor and taste and is suitable for plain and rolling element bearings, central lubrication systems, joints, and as an anti-rust film.
TDS CASSIDA GREASE FC SERIES
CASSIDA GREASE FC 1 and 2 are high performance greases developed for lubricating bearings and seals operating at extreme temperatures, especially in food processing equipment. They are based on a synthetic thickener and carefully selected additives to withstand high heat and meet food safety standards. Registered by NSF for incidental food contact, they provide lubrication in environments with chemicals, acids, and high temperatures from -25°C to 260°C. The greases have excellent resistance to washout and compatibility with various materials used in food machinery.
Renolin clp gear oil range
The RENOLIN CLP gear oil range provides high performance lubrication for industrial gears. It has outstanding extreme pressure characteristics and load carrying capacity. The oils meet numerous industry specifications and approvals. They provide excellent wear protection, corrosion protection, oxidation resistance, and protection against micropitting. The RENOLIN CLP oils are suitable for lubricating enclosed industrial gears operating under heavy or shock loads.
fs-pdf-if-process-l3-life-sciences-en
The document discusses Sefar's GMP compliant filter products for the pharmaceutical industry. Sefar has perfected its manufacturing processes to meet strict GMP guidelines. It produces a range of filter products including bags, liners, discs and fabrics that are tailored for uses such as fluid bed drying, centrifugation, and filtration. These products are manufactured in cleanrooms and include features such as customizable labeling and traceability to meet pharmaceutical industry standards.
Renolit mo 2
This document provides product information for RENOLIT MO 2 grease. It notes that the information provided is typical data for the current product and that improvements may be made in the future. The grease contains lithium soap, high viscosity mineral oil, and black solid lubricants including molybdenum disulfide and graphite, providing excellent wear protection. It is recommended for lubricating vehicle components like CV joints. The grease has a dark gray appearance and works in a temperature range of -20°C to +130°C.
Kluberoil 4-uh1-n-series Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberoil 4 UH1 N is a synthetic gear and multipurpose oil for use in the food and pharmaceutical industries. It meets various industry standards including being registered as NSF H1 and FDA compliant. It has a high oxidation stability and resistance to wear and corrosion, providing long service life. The product is available in various viscosity grades suitable for different applications and temperatures in the food and pharmaceutical sectors.
Recommended
Tds cassida fluid hf series eng (1)
CASSIDA FLUID HF series are synthetic hydraulic fluids developed for food manufacturing machinery. They are carefully blended synthetic fluids and additives that meet stringent food industry requirements. The fluids are NSF certified under ISO 21469 and registered as NSF H1 for incidental food contact. They provide good anti-wear performance and protection against corrosion to minimize maintenance costs while being compatible with seals and gaskets.
Tds cassida grease md 2 eng
CASSIDA GREASE MD 2 is a high performance silicone grease developed for lubricating taps, valves, and fittings with EPDM seals in food and beverage processing equipment. It is resistant to hot water, steam, and disinfectants. It is NSF H1 registered and produced according to quality and hygiene standards for the food industry. CASSIDA GREASE MD 2 is recommended for lubricating various taps, meters, and fittings used for water and drinks.
TDS CASSIDA GREASE LTS 1
CASSIDA GREASE LTS 1 is a high performance, low temperature grease specially formulated for food and beverage processing equipment. It is NSF H1 and ISO 21469 certified and made according to quality and hygiene standards. CASSIDA GREASE LTS 1 has excellent low temperature performance down to -50°C, good water resistance and oxidation stability, and prevents corrosion while providing good adhesion. It has a neutral odor and taste and is suitable for plain and rolling element bearings, central lubrication systems, joints, and as an anti-rust film.
TDS CASSIDA GREASE FC SERIES
CASSIDA GREASE FC 1 and 2 are high performance greases developed for lubricating bearings and seals operating at extreme temperatures, especially in food processing equipment. They are based on a synthetic thickener and carefully selected additives to withstand high heat and meet food safety standards. Registered by NSF for incidental food contact, they provide lubrication in environments with chemicals, acids, and high temperatures from -25°C to 260°C. The greases have excellent resistance to washout and compatibility with various materials used in food machinery.
Renolin clp gear oil range
The RENOLIN CLP gear oil range provides high performance lubrication for industrial gears. It has outstanding extreme pressure characteristics and load carrying capacity. The oils meet numerous industry specifications and approvals. They provide excellent wear protection, corrosion protection, oxidation resistance, and protection against micropitting. The RENOLIN CLP oils are suitable for lubricating enclosed industrial gears operating under heavy or shock loads.
fs-pdf-if-process-l3-life-sciences-en
The document discusses Sefar's GMP compliant filter products for the pharmaceutical industry. Sefar has perfected its manufacturing processes to meet strict GMP guidelines. It produces a range of filter products including bags, liners, discs and fabrics that are tailored for uses such as fluid bed drying, centrifugation, and filtration. These products are manufactured in cleanrooms and include features such as customizable labeling and traceability to meet pharmaceutical industry standards.
Renolit mo 2
This document provides product information for RENOLIT MO 2 grease. It notes that the information provided is typical data for the current product and that improvements may be made in the future. The grease contains lithium soap, high viscosity mineral oil, and black solid lubricants including molybdenum disulfide and graphite, providing excellent wear protection. It is recommended for lubricating vehicle components like CV joints. The grease has a dark gray appearance and works in a temperature range of -20°C to +130°C.
Kluberoil 4-uh1-n-series Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberoil 4 UH1 N is a synthetic gear and multipurpose oil for use in the food and pharmaceutical industries. It meets various industry standards including being registered as NSF H1 and FDA compliant. It has a high oxidation stability and resistance to wear and corrosion, providing long service life. The product is available in various viscosity grades suitable for different applications and temperatures in the food and pharmaceutical sectors.
(EOR/MEOR/BERO/oil recovery)Bero™ biosurfactant：laboratory experiment report+...
Scale dissolving capability, Sand consolidation capability, Wax inhibition experiment, Effect of temperature, Core plugging removal tests
Allplex fmg-us-series Mr Tùng - 0987 988 407 | www.khodaumo.com
The ALLPLEX FMG US Series are aluminum complex thickened semi-synthetic greases created for food, beverage, and pharmaceutical applications. They provide excellent wear protection, water resistance over a broad temperature range, and prevent corrosion and oxidation. Special additives help the greases stay in place during wash-down cycles, improving equipment life. The greases are ideal for lubricating production equipment in various food processing operations and may be applied by brush or grease gun. Proper cleaning is required for maximum hygiene for H1 lubrication approval.
ORIENTATION REPORT SYED MOHSAN RAZA (1)
The document provides an orientation report on the tube production process at Service Industries, a Pakistani company that manufactures tires and tubes. It discusses the company's history and market leadership. The aim of the report is to assess the tube section's organization, manufacturing process, materials used including natural and butyl rubber, nozzle types, production capacity, and the sequence of processes involved in tube production. Key steps covered include compound mixing, refining, feeding, extrusion, inspection and packaging. Production details like temperature settings and equipment sizes are provided.
Cstore - All Purpose Cleaning Program
How APC (All Purpose Cleaner) can save you time, money and increase your CVP (Customer Value Perspective)
Renolin high gear
RENOLIN HighGear is an industrial gear oil developed by FUCHS with a new additive technology called Plastic Deformation (PD) that allows it to form protective tribo layers and reduce surface roughness under extreme loads. It has excellent anti-wear and extreme pressure performance to prevent scuffing, scoring, and other damage. Field tests show it can stop damage and increase component lifetime in heavy gear units operating at high temperatures and loads.
Greyhound Chromatography Q - Range Vials, Caps & Septa
The extensive range of Q-Range autosampler and storage vials and caps, caters for almost every conceivable storage requirement from microlitre to millilitre volumes, in clear or amber glass and plastic materials. Complete with screw, crimp and snap top closures and standard or speciality septa and liners. Our products are designed to suit all the major Instrument manufacturers' equipment, including Agilent, Hitatchi, PerkinElmer, Shimadzu, Thermo Scientific, Varian, Waters etc..
Olio per ingranaggi Texaco Meropa - Fornid
Texaco Meropa si presenta come un olio per ingranaggi che assicura una elevata stabilità terminca ed un'ottima resistenza all'ossidazione. I Texaco Meropa distribuiti su Fornid assicurano una lubrificazione ottimale di tutti gli ingranaggi industriali
Greyhound Chromatography HPLC Pumps
This document provides information on HPLC pumps from Greyhound Chromatography, including specifications and ordering details for various pump models. It describes pumps for isocratic and gradient applications across a range of flow rates and pressures. Models include single piston and dual piston pumps, as well as constant pressure and high pressure pumps. Replacement parts and accessories are also listed. The document aims to help customers select the appropriate pump for their HPLC system and application needs.
Kaiser Pastillation and Benefits
This document discusses different pastillation systems provided by KAISER Process and Belt Technology for producing uniform granules from molten products. It describes the Rollomat, Rollosizer, ZN and GS systems which can handle products with varying viscosities and temperatures. The Rollomat uses an inner-geared hollow cylinder to deposit drops onto a cooling belt, while the Rollosizer achieves higher capacities with low viscosity products using a perforated rotating cylinder. The ZN and GS systems use needle or piston arrangements respectively to form drops. The document also provides an overview of KAISER's experience, capabilities in designing complete processing lines, and applications for various industries.
Wellington Laboratories Certified Reference Standards & Materials
Wellington Laboratories Certified Reference Standards & Materials Greyhound Chromatography and Allied Chemicals
For Over 35 years Wellington Laboratories Inc. has been internationally recognised as a trusted source of high quality reference standard solutions for use in environmental/analytical testing and toxicological research. Wellington Laboratories offers an extensive inventory of individual certified reference standards and solution mixtures of native and mass-labelled halogenated organic compounds including polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, polychlorinated biphenyls, halogenated flame retardants and perfluorinated compounds. Wellington Laboratories also offer a variety of calibration sets and support solutions designed to be used for common regulatory methods or modified in-house methods.
Wellington’s Reference Standards are used mainly in Environmental/analytical testing and toxicological research. Wellington offers an extensive inventory of individual certified reference standards and solution mixtures of native and mass-labelled halogenated organic compounds including polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, polychlorinated biphenyls, halogenated flame retardants and perfluorinated compounds. Wellington also offer a variety of calibration sets and support solutions designed to be used for common regulatory methods of modified in-house methods.
Ait Smart Caps HPLC Safety Solutions
Protect health, Minimise solvent evaporation, Maintain accurate solvent concentrations, No external contamination of eluent.
Smart Healthy Caps are designed to comply with the increasing safety regulations of the modern laboratory and are manufactured from inert, chemically resistant materials, such as PTFE and polypropylene.
The use of Smart Healthy Caps can reduce harmful solvent evaporation from solvent inlet reservoirs by up to 80%, protecting health and keeping the HPLC eluent concentration accurate for several days. This is achieved by the use of a one-way check valve which allows air to enter the bottle for pressure equalization, but eliminates solvent vapour emissions.
Smart Healthy Caps also protect solvents against external contamination and are available to fit a wide range of bottle types and sizes. They can be supplied with 1 to 5 outlet ports to accommodate multiple HPLCs. Tubing (1/ 8˝ or 1/ 16˝ od.) is securely fixed with use of the AIT universal fitting which requires no ferrule or flanging of the tube.
Smart Healthy Caps are designed to fit a complete range of bottle threads either directly or through the use of a suitable adaptor.
Etalon Product Catalogue | ENG - v2019
This document provides setup recommendations for spraying various automotive refinishing materials from Etalon using DeVilbiss spray guns. It lists the recommended gun, fluid tip size, air cap, and inlet air pressure for spraying one-component primers, two-component primers, clearcoats, and more. Spraying parameters like fluid tip size, air cap, and inlet pressure can be adjusted based on the specific material being sprayed to achieve optimal application results.
Eagle OILVAC® 150 PSI Hose – Corrugated Hose - Oilfield Hose
Eagle OILVAC® 150 PSI Hose – Corrugated Hose - Oilfield Hose - this hose is for use in oilfield vacuum tank service for frack solutions and slurries as well as handling crude oil. It is not for use with refined petroleum products. Use for applications with up to 35% aromatic content.
2", 3", 4", 6" & 8" ID
-22°F to 176°F
Jet oil 254 pds
Mobil Jet Oil 254 is a synthetic lubricant designed for aircraft gas turbine engines. It has superior thermal and oxidation stability compared to earlier generation lubricants, helping to prevent deterioration and deposits. It maintains low viscosity at low temperatures for reliable lubrication during starting, while resisting evaporation at high operating temperatures. Testing shows it reduces oxidation and deposit formation compared to typical turbine oils. It is compatible with engines and materials commonly used in gas turbine construction.
Umang neutral pellets
This document provides information on various types of pellet cores that can be used for encapsulation, including their compositions, properties, and applications. It describes sugar pellets, starch pellets, lactose pellets, calcium carbonate pellets, tartaric acid pellets, mannitol pellets, silica pellets, and MCC pellets. For each type, it provides details on grade, particle size ranges, and uses as seed cores for drug layering or coating in formulations requiring controlled or sustained release.
Renolin gp oils
RENOLIN GP Oils are a range of general purpose mineral oils prepared from highly refined base oils. They have inherent resistance to degradation and excellent water and air separation properties. The oils can be used in circulatory, total loss, and gear systems as well as industrial and automotive applications. Specific grades are suitable for use as mould release oils, vacuum pumps, steam cylinder units, and other equipment where a non-additive mineral oil is required.
TDS CASSIDA GREASE MD 2
CASSIDA GREASE MD 2 is a high performance silicone lubricant specially developed for lubricating valves, tapes and fittings containing EPDM seals in the food and beverage processing industry. It is resistant to hot water, steam and disinfectants. It is NSF H1 registered for potential incidental food contact and produced according to ISO quality and hygiene standards. CASSIDA GREASE MD 2 lubricates valves and fittings at temperatures from -40°C to 200°C and is compatible with EPDM and other elastomers commonly used in food systems.
Mak hydrol msds
These oils are blended hydraulic fluids recommended for general hydraulic equipment in control and power transmission systems. They exhibit good oxidation resistance, anti-rust properties, anti-wear properties, and anti-foam properties. The oils meet Indian standards IS 3098 and IS 10522 for various viscosity grades and provide characteristics such as density, kinematic viscosity, viscosity index, pour point, and flash point within typical ranges.
Kluberfood nh1-64-422 Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberfood NH1 64-422 is a synthetic grease developed for use in food processing equipment. It provides good wear protection, sealing protection to prevent moisture ingress, and supports hygienic requirements. The grease is NSF H-1 registered, making it suitable for incidental food contact. It can be applied by standard grease equipment to lubricate bearings and machines used in food production, such as grain and feed manufacturing, and helps enable a safe production process in accordance with regulations.
Prime overview internet version
Prime Equipment Group, Inc. is a USA-based manufacturer of poultry processing equipment that has earned over more than two decades the trust of the industry by supplying innovative, reliable and hard-working solutions for nearly every point on the modern processing line.
ProOne Brochure
The document discusses ProOne's lubrication and fuel technologies. It describes ProOne's FuelMaximizer product as a fuel catalyst that offers benefits like significantly reduced fuel consumption, lower emissions, increased lubricity to protect engines, and prevention of corrosion and carbon build-up. It also describes ProOne's lubricant products which use an XPL+ technology to bond to metal and reduce heat, friction, and wear. This technology offers benefits such as reducing costs, extending equipment life, increasing productivity, and lowering energy consumption and downtime.
Gazpromneft Hydraulic HD Hydrauliköl
This document provides information on Gazpromneft Hydraulic HD premium anti-wear hydraulic fluids. It is intended for use in hydraulic systems in industrial applications and heavy-duty machinery, especially high pressure pumps, machine tools, presses, and systems with gears and bearings. The fluids provide benefits such as high performance over long periods, protection from corrosion and deposits, thermal and oxidation stability, demulsibility, anti-foam and anti-wear properties, and compatibility with common hydraulic system components. Specifications met by the fluids are listed, along with typical physical property data for different viscosity grades.
More Related Content
What's hot
(EOR/MEOR/BERO/oil recovery)Bero™ biosurfactant：laboratory experiment report+...
Scale dissolving capability, Sand consolidation capability, Wax inhibition experiment, Effect of temperature, Core plugging removal tests
Allplex fmg-us-series Mr Tùng - 0987 988 407 | www.khodaumo.com
The ALLPLEX FMG US Series are aluminum complex thickened semi-synthetic greases created for food, beverage, and pharmaceutical applications. They provide excellent wear protection, water resistance over a broad temperature range, and prevent corrosion and oxidation. Special additives help the greases stay in place during wash-down cycles, improving equipment life. The greases are ideal for lubricating production equipment in various food processing operations and may be applied by brush or grease gun. Proper cleaning is required for maximum hygiene for H1 lubrication approval.
ORIENTATION REPORT SYED MOHSAN RAZA (1)
The document provides an orientation report on the tube production process at Service Industries, a Pakistani company that manufactures tires and tubes. It discusses the company's history and market leadership. The aim of the report is to assess the tube section's organization, manufacturing process, materials used including natural and butyl rubber, nozzle types, production capacity, and the sequence of processes involved in tube production. Key steps covered include compound mixing, refining, feeding, extrusion, inspection and packaging. Production details like temperature settings and equipment sizes are provided.
Cstore - All Purpose Cleaning Program
How APC (All Purpose Cleaner) can save you time, money and increase your CVP (Customer Value Perspective)
Renolin high gear
RENOLIN HighGear is an industrial gear oil developed by FUCHS with a new additive technology called Plastic Deformation (PD) that allows it to form protective tribo layers and reduce surface roughness under extreme loads. It has excellent anti-wear and extreme pressure performance to prevent scuffing, scoring, and other damage. Field tests show it can stop damage and increase component lifetime in heavy gear units operating at high temperatures and loads.
Greyhound Chromatography Q - Range Vials, Caps & Septa
The extensive range of Q-Range autosampler and storage vials and caps, caters for almost every conceivable storage requirement from microlitre to millilitre volumes, in clear or amber glass and plastic materials. Complete with screw, crimp and snap top closures and standard or speciality septa and liners. Our products are designed to suit all the major Instrument manufacturers' equipment, including Agilent, Hitatchi, PerkinElmer, Shimadzu, Thermo Scientific, Varian, Waters etc..
Olio per ingranaggi Texaco Meropa - Fornid
Texaco Meropa si presenta come un olio per ingranaggi che assicura una elevata stabilità terminca ed un'ottima resistenza all'ossidazione. I Texaco Meropa distribuiti su Fornid assicurano una lubrificazione ottimale di tutti gli ingranaggi industriali
Greyhound Chromatography HPLC Pumps
This document provides information on HPLC pumps from Greyhound Chromatography, including specifications and ordering details for various pump models. It describes pumps for isocratic and gradient applications across a range of flow rates and pressures. Models include single piston and dual piston pumps, as well as constant pressure and high pressure pumps. Replacement parts and accessories are also listed. The document aims to help customers select the appropriate pump for their HPLC system and application needs.
Kaiser Pastillation and Benefits
This document discusses different pastillation systems provided by KAISER Process and Belt Technology for producing uniform granules from molten products. It describes the Rollomat, Rollosizer, ZN and GS systems which can handle products with varying viscosities and temperatures. The Rollomat uses an inner-geared hollow cylinder to deposit drops onto a cooling belt, while the Rollosizer achieves higher capacities with low viscosity products using a perforated rotating cylinder. The ZN and GS systems use needle or piston arrangements respectively to form drops. The document also provides an overview of KAISER's experience, capabilities in designing complete processing lines, and applications for various industries.
Wellington Laboratories Certified Reference Standards & Materials
Wellington Laboratories Certified Reference Standards & Materials Greyhound Chromatography and Allied Chemicals
For Over 35 years Wellington Laboratories Inc. has been internationally recognised as a trusted source of high quality reference standard solutions for use in environmental/analytical testing and toxicological research. Wellington Laboratories offers an extensive inventory of individual certified reference standards and solution mixtures of native and mass-labelled halogenated organic compounds including polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, polychlorinated biphenyls, halogenated flame retardants and perfluorinated compounds. Wellington Laboratories also offer a variety of calibration sets and support solutions designed to be used for common regulatory methods or modified in-house methods.
Wellington’s Reference Standards are used mainly in Environmental/analytical testing and toxicological research. Wellington offers an extensive inventory of individual certified reference standards and solution mixtures of native and mass-labelled halogenated organic compounds including polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, polychlorinated biphenyls, halogenated flame retardants and perfluorinated compounds. Wellington also offer a variety of calibration sets and support solutions designed to be used for common regulatory methods of modified in-house methods.
Ait Smart Caps HPLC Safety Solutions
Protect health, Minimise solvent evaporation, Maintain accurate solvent concentrations, No external contamination of eluent.
Smart Healthy Caps are designed to comply with the increasing safety regulations of the modern laboratory and are manufactured from inert, chemically resistant materials, such as PTFE and polypropylene.
The use of Smart Healthy Caps can reduce harmful solvent evaporation from solvent inlet reservoirs by up to 80%, protecting health and keeping the HPLC eluent concentration accurate for several days. This is achieved by the use of a one-way check valve which allows air to enter the bottle for pressure equalization, but eliminates solvent vapour emissions.
Smart Healthy Caps also protect solvents against external contamination and are available to fit a wide range of bottle types and sizes. They can be supplied with 1 to 5 outlet ports to accommodate multiple HPLCs. Tubing (1/ 8˝ or 1/ 16˝ od.) is securely fixed with use of the AIT universal fitting which requires no ferrule or flanging of the tube.
Smart Healthy Caps are designed to fit a complete range of bottle threads either directly or through the use of a suitable adaptor.
Etalon Product Catalogue | ENG - v2019
This document provides setup recommendations for spraying various automotive refinishing materials from Etalon using DeVilbiss spray guns. It lists the recommended gun, fluid tip size, air cap, and inlet air pressure for spraying one-component primers, two-component primers, clearcoats, and more. Spraying parameters like fluid tip size, air cap, and inlet pressure can be adjusted based on the specific material being sprayed to achieve optimal application results.
Eagle OILVAC® 150 PSI Hose – Corrugated Hose - Oilfield Hose
Eagle OILVAC® 150 PSI Hose – Corrugated Hose - Oilfield Hose - this hose is for use in oilfield vacuum tank service for frack solutions and slurries as well as handling crude oil. It is not for use with refined petroleum products. Use for applications with up to 35% aromatic content.
2", 3", 4", 6" & 8" ID
-22°F to 176°F
Jet oil 254 pds
Mobil Jet Oil 254 is a synthetic lubricant designed for aircraft gas turbine engines. It has superior thermal and oxidation stability compared to earlier generation lubricants, helping to prevent deterioration and deposits. It maintains low viscosity at low temperatures for reliable lubrication during starting, while resisting evaporation at high operating temperatures. Testing shows it reduces oxidation and deposit formation compared to typical turbine oils. It is compatible with engines and materials commonly used in gas turbine construction.
Umang neutral pellets
This document provides information on various types of pellet cores that can be used for encapsulation, including their compositions, properties, and applications. It describes sugar pellets, starch pellets, lactose pellets, calcium carbonate pellets, tartaric acid pellets, mannitol pellets, silica pellets, and MCC pellets. For each type, it provides details on grade, particle size ranges, and uses as seed cores for drug layering or coating in formulations requiring controlled or sustained release.
Renolin gp oils
RENOLIN GP Oils are a range of general purpose mineral oils prepared from highly refined base oils. They have inherent resistance to degradation and excellent water and air separation properties. The oils can be used in circulatory, total loss, and gear systems as well as industrial and automotive applications. Specific grades are suitable for use as mould release oils, vacuum pumps, steam cylinder units, and other equipment where a non-additive mineral oil is required.
TDS CASSIDA GREASE MD 2
CASSIDA GREASE MD 2 is a high performance silicone lubricant specially developed for lubricating valves, tapes and fittings containing EPDM seals in the food and beverage processing industry. It is resistant to hot water, steam and disinfectants. It is NSF H1 registered for potential incidental food contact and produced according to ISO quality and hygiene standards. CASSIDA GREASE MD 2 lubricates valves and fittings at temperatures from -40°C to 200°C and is compatible with EPDM and other elastomers commonly used in food systems.
Mak hydrol msds
These oils are blended hydraulic fluids recommended for general hydraulic equipment in control and power transmission systems. They exhibit good oxidation resistance, anti-rust properties, anti-wear properties, and anti-foam properties. The oils meet Indian standards IS 3098 and IS 10522 for various viscosity grades and provide characteristics such as density, kinematic viscosity, viscosity index, pour point, and flash point within typical ranges.
Kluberfood nh1-64-422 Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberfood NH1 64-422 is a synthetic grease developed for use in food processing equipment. It provides good wear protection, sealing protection to prevent moisture ingress, and supports hygienic requirements. The grease is NSF H-1 registered, making it suitable for incidental food contact. It can be applied by standard grease equipment to lubricate bearings and machines used in food production, such as grain and feed manufacturing, and helps enable a safe production process in accordance with regulations.
Prime overview internet version
Prime Equipment Group, Inc. is a USA-based manufacturer of poultry processing equipment that has earned over more than two decades the trust of the industry by supplying innovative, reliable and hard-working solutions for nearly every point on the modern processing line.
What's hot (20)
(EOR/MEOR/BERO/oil recovery)Bero™ biosurfactant：laboratory experiment report+...
(EOR/MEOR/BERO/oil recovery)Bero™ biosurfactant：laboratory experiment report+...
Allplex fmg-us-series Mr Tùng - 0987 988 407 | www.khodaumo.com
Allplex fmg-us-series Mr Tùng - 0987 988 407 | www.khodaumo.com
Greyhound Chromatography Q - Range Vials, Caps & Septa
Greyhound Chromatography Q - Range Vials, Caps & Septa
Wellington Laboratories Certified Reference Standards & Materials
Wellington Laboratories Certified Reference Standards & Materials
Eagle OILVAC® 150 PSI Hose – Corrugated Hose - Oilfield Hose
Eagle OILVAC® 150 PSI Hose – Corrugated Hose - Oilfield Hose
Kluberfood nh1-64-422 Mr Tùng - 0987 988 407 | www.khodaumo.com
Kluberfood nh1-64-422 Mr Tùng - 0987 988 407 | www.khodaumo.com
Similar to 8 40-cs-fg-ep-series
ProOne Brochure
The document discusses ProOne's lubrication and fuel technologies. It describes ProOne's FuelMaximizer product as a fuel catalyst that offers benefits like significantly reduced fuel consumption, lower emissions, increased lubricity to protect engines, and prevention of corrosion and carbon build-up. It also describes ProOne's lubricant products which use an XPL+ technology to bond to metal and reduce heat, friction, and wear. This technology offers benefits such as reducing costs, extending equipment life, increasing productivity, and lowering energy consumption and downtime.
Gazpromneft Hydraulic HD Hydrauliköl
This document provides information on Gazpromneft Hydraulic HD premium anti-wear hydraulic fluids. It is intended for use in hydraulic systems in industrial applications and heavy-duty machinery, especially high pressure pumps, machine tools, presses, and systems with gears and bearings. The fluids provide benefits such as high performance over long periods, protection from corrosion and deposits, thermal and oxidation stability, demulsibility, anti-foam and anti-wear properties, and compatibility with common hydraulic system components. Specifications met by the fluids are listed, along with typical physical property data for different viscosity grades.
Delrin 100 AF Data Sheet and Properties
This data sheet and properties information has been uploaded and shared by Emco Industrial Plastics. This plastics distributor, manufacturer and fabrication company has everything that you need for your engineering and tooling needs.
To purchase Delrin AF visit http://www.emcoplastics.com/materials/delrin/delrin-af-100/
Pu tube-material in SIngapore
Aluminum piping for compressed air is a new concept which is basically using Push In fittings to join aluminum pipe. It takes a very limited amount of time and no tools are required for the same. It can be used for pressures upto 17 bar and because of the fact that all fittings and pipes are made in aluminum there is a good durability of the system and the air system remains corrosion free and leakage free for years. Owing to the beautiful system design, it becomes very easy to re-open and again assemble the fittings from the pipe so mobility is increased and it becomes very easy to dismantle an entire pneumatic system and relocate it or modify it as per the user's requirements.
Rig-Chem Products Bulletin
1. The document lists various products from Rigchem including drilling mud additives, cleaners, and corrosion inhibitors.
2. Key products mentioned include CC-1250M, a proprietary blend for removing synthetic mud, Defoamer W-1 for controlling foam, and PDR-4000/6000 which remove pipe dope and hydrocarbons from casing and work strings.
3. Many of the products are described as environmentally friendly and made to replace more hazardous chemicals commonly used in the past.
Polylub gly-151-501-801 Mr Tùng - 0987 988 407 | www.khodaumo.com
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.
New silicone copolymer lubricants
The document introduces Dow Corning's new line of phenyl-fluoro siloxane copolymer lubricants. These lubricants offer improved thermal stability and wear resistance compared to traditional silicone lubricants due to their copolymer structure. Grease and fluid formulations were developed with different phenyl-fluoro ratios to balance thermal stability and wear performance. Testing showed the copolymer lubricants outperformed polyol ester and PFPE lubricants in high temperature performance, corrosion resistance, and wear resistance. The new Molykote G-900x grease series was highlighted as a competitive alternative to PFPE lubricants for applications from -35°C to 220°C.
Renolin unisyn clp range
RENOLIN UNISYN CLP is a fully-synthetic industrial gear lubricant based on polyalphaolefins that provides improved ageing resistance, excellent load-carrying capacity and wear protection. It is recommended for use in environments with extreme temperatures and can provide longer oil-change intervals than mineral oils. It meets various industry specifications and is approved by several manufacturers. The lubricant has benefits such as low foaming, good viscosity properties, and excellent wear and corrosion protection for use in highly-stressed components.
Nordel selection guide
The document provides information on NORDEL EPDM products from Dow, which are ethylene propylene diene monomer polymers available with a wide range of ethylene contents. The polymers offer improved performance characteristics such as yield, reduced scrap, and cleanliness. NORDEL EPDM polymers are sold in bale and pellet forms. Tables and figures provide details on properties and applications of various grades of NORDEL EPDM and how they compare in testing. The document also summarizes FDA compliance of grades.
Nuto h series datasheet eng
The document describes Nuto H Series hydraulic oils produced by Mobil Industrial in Vietnam. The oils are intended for industrial and mobile hydraulic applications requiring anti-wear lubricants. They offer effective oxidation resistance, corrosion protection, and filterability to prevent filter blockage in the presence of water. The oils meet specifications for anti-wear performance, protecting pumps and extending pump life. They are suitable for systems using various pump types where mild anti-wear properties are required and where small amounts of water contamination are unavoidable.
Texaco Rando HD ISO 32, 48, 68 - Olio idraulico Fornid
Olio idraulico Texaco Rando HD per sistemi idraulici pompe ad alta velocità, pompe a ingranaggi o palette
2010 Amco Clear Catalog
This document provides information about turbidity standards and instrumentation from GFS Chemicals Inc. It includes:
1) A list of individual turbidity standards for various instruments in values from 0.0 NTU to 7500 NTU.
2) Information on haze standards and total suspended solids standards.
3) Descriptions of turbidity standard kits including primary standard kits, secondary standard kits, and deluxe standard kits containing both primary and secondary standards.
Polymer Product Technical Datasheet Template
Here is a “Polymer Product Technical Datasheet Template“. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
Velvex Industrial Oil - Nandan Petrochem Ltd
In pursuit of excellence, NPL has introduced its brand Velvex For Total Industrial Lubricant
Solutions to the Industrial oil users. Keeping customer benefits and service at the forefront,
Velvex has been developed to provide complete satisfaction with simultaneously offering value for money to its esteemed customers.
Motul DS Universal 10w30 / 20w40 - Fornid
This document summarizes the specifications and performance of DS Universal Multigrade 10W-30 and 20W-40 multipurpose lubricants. It is formulated for non-turbocharged gasoline and diesel engines, transmissions without wet brakes, and hydraulic lifter systems. The lubricant meets various industry specifications and provides anti-oxidation, anti-corrosion, anti-rust, anti-foam, and detergent properties to ensure engine cleanliness and protection of heavily loaded parts. It can be used as a single lubricant for engines, transmissions, and hydraulic systems to avoid the risk of misuse or mixture.
TDS FM GEAR OIL SERIES
FM GEAR OIL 220 and 460 are lubricants designed for enclosed gears in food and beverage processing equipment. They are certified by NSF for ISO 21469 and registered by NSF Class H1 for potential incidental food contact. The gear oils provide good lubrication for a variety of applications under steel on steel and phosphor-bronze components between 0°C and 110°C. They are compatible with common seals and coatings used in food machinery.
Geartex EP-C - 8W140 - Olio per trasmissioni - Texaco - Fornid
Geartex EP-C - 8W140 - Olio per trasmissioni - Texaco - FornidFornid - Articoli tecnici e industriali
Geartex EP-C is a high performance automotive gear lubricant suitable for hypoid drive axles, steering systems, and non-synchronized transmissions requiring API GL-5. It provides reliable shear stability, low temperature fluidity for rapid lubrication, high performance EP protection against scuffing and wear, robust oxidation stability, and compatibility with elastomers. It is approved against specifications including API, Daimler, MAN, US Military, Volvo, and ZF.Kluberlub be-41-1501 Mr Tùng - 0987 988 407 | www.khodaumo.com
Klüberlub BE 41-1501 is a heavy-duty grease developed for large, low-speed rolling bearings subjected to high loads. It has a high base oil viscosity, excellent wear protection, and contains solid lubricants for use under starved lubrication conditions. Testing showed the grease meets requirements for very high load and shock applications in industries like material handling. It is suitable for lubricating the bearings in machines like roller presses and rotary crushers.
Barrierta i-series Mr Tùng - 0987 988 407 | www.khodaumo.com
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA's four viscosity grades.
Barrierta i-series 2 Mr Tùng - 0987 988 407 | www.khodaumo.com
This document describes BARRIERTA lubricants, which are high-quality, high-temperature lubricants based on perfluorinated polyether oil. BARRIERTA lubricants offer benefits such as excellent thermal stability, low evaporation rates, and compatibility with a wide range of plastics and elastomers. They are suitable for applications such as bearings, guides, electrical contacts, chains, and plastic-plastic friction points operating at extreme temperatures or in aggressive environments. The document provides information on product codes, properties, applications, and packaging of BARRIERTA lubricants.
Similar to 8 40-cs-fg-ep-series (20)
Polylub gly-151-501-801 Mr Tùng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr Tùng - 0987 988 407 | www.khodaumo.com
Texaco Rando HD ISO 32, 48, 68 - Olio idraulico Fornid
Texaco Rando HD ISO 32, 48, 68 - Olio idraulico Fornid
Geartex EP-C - 8W140 - Olio per trasmissioni - Texaco - Fornid
Geartex EP-C - 8W140 - Olio per trasmissioni - Texaco - Fornid
Kluberlub be-41-1501 Mr Tùng - 0987 988 407 | www.khodaumo.com
Kluberlub be-41-1501 Mr Tùng - 0987 988 407 | www.khodaumo.com
Barrierta i-series Mr Tùng - 0987 988 407 | www.khodaumo.com
Barrierta i-series Mr Tùng - 0987 988 407 | www.khodaumo.com
Barrierta i-series 2 Mr Tùng - 0987 988 407 | www.khodaumo.com
Barrierta i-series 2 Mr Tùng - 0987 988 407 | www.khodaumo.com
Recently uploaded
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
this notes have been created
by Eric36 at nyamata ttc
after readings
pe book for y2sme .
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Recently uploaded (20)
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Eric Nizeyimana's document 2006 from gicumbi to ttc nyamata handball play
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
8 40-cs-fg-ep-series
- 1. PRODUCT DATA “These products are certified OU Kosher Pareve” *NSF International H-1 Registered NSF ISO21469 Certification DESCRIPTION LUBRIPLATE CS-FG EP Series are calcium sulfonate thickened incidental food contact greases which offer premium performance properties. All ingredients used to manufacture these products comply with FDA 21 CFR 178.3570 and meet the requirements for NSF H1. These greases also have excellent corrosion protection, and superior water washout properties. APPLICATIONS Meat Processing Plants Canneries Dairies Breweries Carton & Packaging Equipment Food Processing & Handling Equipment Bottling Plants Many others where incidental food contact is a possibility ADVANTAGES Base oil is 100% USP white oil, 100 cSt viscosity @ 40°C Superior protection from rust and corrosion Excellent resistance to water washout and spray off Outstanding high-temperature properties Typical Test Data – See Back STORAGE RECOMMENDATIONS Product should be stored in a dry covered area between 40°F to 120°F, away from direct sunlight. Open containers, temperature, and moisture may alter normal shelf-life. PACKAGING AVAILABLE CS-FG EP-2 CS-FG EP-1 415 lb. Drum L0138-040 L0155-040 120 lb. Drum L0138-039 L0155-039 35 lb. Pail L0138-035 L0155-035 Case 40/15.5 oz. Cartridges L0138-098 *** *NSF International H-1 Registration No. 151136 155256 (Meets former USDA 1998 Guidelines) PACKAGING AVAILABLE CS-FG EP-0 CS-FG EP-00 415 lb. Drum L0154-040 L0153-040 120 lb. Drum L0154-039 L0153-039 35 lb. Pail L0154-035 L0153-035 *NSF International H-1 Registration No. 155255 155254 (Meets former USDA 1998 Guidelines) *Registered H-1 by NSF International for use in food processing facilities as a lubricant or anti-rust agent on equipment in which there may be incidental contact involving the lubricated part and the edible product. ISO-9001 Registered Quality System. ISO-21469 Compliant. 8 - 40 Sales, Service & Distribution Center Newark, NJ 07105 Phone: 973-589-9150 Fax: 973-589-4432 Manufacturing, Sales, Service & Distribution Center Toledo, OH 43605 Phone: 419-691-2491 Fax: 419-693-3806 Sales and Tech Service Support Phone: 1-800-733-4755 LUBRIPLATE CS-FG EP SERIES CS-FG EP-2, CS-FG EP-1, CS-FG EP-0, CS-FG EP-00
- 2. Printed in USA Revised 8/22/2017 PROPERTY TEST METHOD TYPICAL RESULTS* ASTM CS-FG EP-2 CS-FG EP-1 CS-FG EP-0 CS-FG EP-00 NLGI Grade 2 1 0 00 Color Visual Beige Beige Beige Beige Texture Visual Smooth Smooth Smooth Smooth Dropping Point, °C D-2265 316°C + 316°C + 217°C - Worked Penetration, 60 Double Strokes, dmm D-217 265 – 295 310-340 355-385 400-430 Mechanical Stability: Worked Penetration, 10,000 Double Strokes: % Change D-217 < 3.0 < 3.0 < 3.8 < 8 Roll Stability: % Change D-1831 < 3.0 < 3.5 - - Timken OK Load, kg D-2509 60 lbs. 50 lbs. - - 4-Ball EP: LWI, kgf D-2596 50 45 45 45 Weld Point, kg D-2596 400 400 400 300 4-Ball Wear, mm D-2266 0.50 0.52 0.57 0.57 Fretting Wear, mg D-4170 8.7 mg 0.2 mg 0.2 mg 0.2 mg Bearing Rust Protection D-1743 Pass Pass Pass Pass Salt Fog Corrosion, 1 mil d.f.t., 48 hrs B-117 Pass Pass Pass Pass Wheel Bearing Leakage, grams D-4290 < 3 < 5 20.12g - Bearing Life Performance, hours D-3527 150+ 125 100 100 Bomb Oxidation, 100 hours @ 99°C, PSI Drop D-942 < 1 0 0 0 Water Washout, % removed D-1264 < 1 < 5 - - Water Spray Off, % removed D-4049 29.6 - - - Oil Separation, % loss D-1742 < 0.5 - - - Copper Strip Corrosion D-4048 1b 1b 1b 1b Elastomer Compatibility: D-4289 AMS 3217/3B CR Type 70 hours @ 100CC Percent Swell +3.4 +3.6 +3.7 +3.7 Hardness Change, Durometer A Points -1.2 -1.0 -1.0 -1.0 Base Oil Viscosity, cSt: D-445 @ 100°C 11.7 11.7 11.7 11.7 @ 40°C 105 105 105 105 Viscosity Index 100 100 100 100 Emcor Corrosion, 3% NaCI D-6138 2,2 - - - Emcor Corrosion Distilled Water #1 #1 #1 #1 Lincoln Ventmeter: @ 77°F @ 30°F @ 0°F K95400 260 psi 552 psi 1,554 psi - 31 psi (@-20°C)83 psi 31 psi -