Avalanche® 2000 II Hose - Snow Making Hose
•
0 likes•39 views
This document summarizes the specifications of an Avalanche 2000 II snowmaking hose produced by JGB Enterprises. The hose features a black thermoplastic liner that reduces friction compared to conventional liners, as well as a woven polyester reinforcement and cover. It can operate down to -55 degrees Fahrenheit and is available in standard lengths of 50 and 100 feet, as well as custom lengths. It uses internally expanded aluminum or quick disconnect couplings. Pressure and burst ratings are provided for different inner diameters. Contact information and locations are listed for JGB Enterprises.
Report
Share
Report
Share
Download to read offline
Recommended
Ellis Patents 2 Hole Cable Cleat Aluminium - Spec Sheet
This document contains specifications for a series of two-hole aluminum cable clamps. It includes the part numbers, dimensions, weight, cable diameter range, and fixing details for 12 different clamp models. It also summarizes the results of impact resistance, electro-mechanical force, temperature, flame, and load testing performed on the clamps according to an international standard for cable cleats.
High Speed Servo Robot Spot Welding With Quality
servo motors, spot welding, weld qulity, chisel check, weld containment, weld process control, spot welding new AHSS steel
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge Hose
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge HoseJGB Enterprises, Inc.
JGB Private Brand - Eagle Orange/Clear Suction and Discharge Hose - This suction and discharge hose is constructed of flexible PVC and a rigid PVC helix with synthetic braiding. It is easy to drag, lightweight and flexible, and perfect for fish suctioning or rental/construction pumping. Banding coils for this hose are also available.
1-1/2" to 10" ID
-13°F to 140°FJ-FLEX® Hydraulic Hose Solutions
JGB Enterprises, Inc. carries Hydraulic Hose in the sizes, lengths & vacuum ratings for any low to high-pressure apparatus. Most of our Hydraulic Hoses come with a choice of covers depending on usage conditions. Along with our bulk hose, JGB custom assembles Hydraulic Hose in many variations. We also carry hydraulic Fittings, Adapters, and Couplers to work with any type of hydraulic systems with any pressure rating requirements. JGB can provide low pressure hose to ultra-high pressure hydraulic hose for arduous operating conditions needing extremely high flexibility.
Coating aug 2013 newsletter handout oem lo
Our Extreme Wear Solutions serve aerospace, mining, oil & gas and agriculture designed to reduce costly downtime, reduce wearable part repair costs and reduce maintenance by extending service cycles.
Ptfe flex imperial smoothbore brochure
The document discusses an imperial range of hoses made of PTFE that are suitable for transferring electrically resistive fluids at high flow rates. Antistatic liners and stainless steel braided options are available. The hoses can operate in temperatures ranging from -60°C to +260°C and are used globally in industries such as industrial, chemical, pharmaceutical, automotive, and food. Technical specifications and part numbers are provided for standard wall hoses in sizes from 1/4" to 1".
Bimed cable gland explosion proof and industrial
Bimed began in 1978 manufacturing medical and mechanical components. It is now a family-owned company with over 300 employees and a 20,000 square meter facility in Istanbul, Turkey. Bimed produces a range of products including cable glands, pressure balance elements, connectors, gas springs, and disposable medical products. These products are sold globally and conform to relevant quality and safety standards.
Find Silicon Wafer Suppliers in West Palm Beach
This document provides information on the manufacturing services offered by a certified company, including polishing one or two sides of surfaces, etching and deposition processes, reclaim services, and distributing cassettes and shipping containers for wafers. The company can polish silicon wafers with resistivities between 0.001-50 ohm-cm and offers EPI solar grade quality polishing.
Recommended
Ellis Patents 2 Hole Cable Cleat Aluminium - Spec Sheet
This document contains specifications for a series of two-hole aluminum cable clamps. It includes the part numbers, dimensions, weight, cable diameter range, and fixing details for 12 different clamp models. It also summarizes the results of impact resistance, electro-mechanical force, temperature, flame, and load testing performed on the clamps according to an international standard for cable cleats.
High Speed Servo Robot Spot Welding With Quality
servo motors, spot welding, weld qulity, chisel check, weld containment, weld process control, spot welding new AHSS steel
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge Hose
Eagle Orange/Clear Suction and Discharge Hose – Water Suction and Discharge HoseJGB Enterprises, Inc.
JGB Private Brand - Eagle Orange/Clear Suction and Discharge Hose - This suction and discharge hose is constructed of flexible PVC and a rigid PVC helix with synthetic braiding. It is easy to drag, lightweight and flexible, and perfect for fish suctioning or rental/construction pumping. Banding coils for this hose are also available.
1-1/2" to 10" ID
-13°F to 140°FJ-FLEX® Hydraulic Hose Solutions
JGB Enterprises, Inc. carries Hydraulic Hose in the sizes, lengths & vacuum ratings for any low to high-pressure apparatus. Most of our Hydraulic Hoses come with a choice of covers depending on usage conditions. Along with our bulk hose, JGB custom assembles Hydraulic Hose in many variations. We also carry hydraulic Fittings, Adapters, and Couplers to work with any type of hydraulic systems with any pressure rating requirements. JGB can provide low pressure hose to ultra-high pressure hydraulic hose for arduous operating conditions needing extremely high flexibility.
Coating aug 2013 newsletter handout oem lo
Our Extreme Wear Solutions serve aerospace, mining, oil & gas and agriculture designed to reduce costly downtime, reduce wearable part repair costs and reduce maintenance by extending service cycles.
Ptfe flex imperial smoothbore brochure
The document discusses an imperial range of hoses made of PTFE that are suitable for transferring electrically resistive fluids at high flow rates. Antistatic liners and stainless steel braided options are available. The hoses can operate in temperatures ranging from -60°C to +260°C and are used globally in industries such as industrial, chemical, pharmaceutical, automotive, and food. Technical specifications and part numbers are provided for standard wall hoses in sizes from 1/4" to 1".
Bimed cable gland explosion proof and industrial
Bimed began in 1978 manufacturing medical and mechanical components. It is now a family-owned company with over 300 employees and a 20,000 square meter facility in Istanbul, Turkey. Bimed produces a range of products including cable glands, pressure balance elements, connectors, gas springs, and disposable medical products. These products are sold globally and conform to relevant quality and safety standards.
Find Silicon Wafer Suppliers in West Palm Beach
This document provides information on the manufacturing services offered by a certified company, including polishing one or two sides of surfaces, etching and deposition processes, reclaim services, and distributing cassettes and shipping containers for wafers. The company can polish silicon wafers with resistivities between 0.001-50 ohm-cm and offers EPI solar grade quality polishing.
Techfluid Drilling & Production Hose
Techfluid manufactures our own bonded rubber Mud, Cement and Tensioner hoses with spirally laid high tensile steel cable reinforcement and one-piece bonded in end couplings. The hoses are mandrel built in continuous lengths up to 70 metres and vulcanised to form a fully bonded hose offering high integrity and excellent flexibility. Our range covers pressures up to 15,000psi in sizes up to 16”.
Prysmian BICON 370 2 Bolt Cable Cleats - Spec Sheet
The document provides specifications for the Aluminium Two Bolt Cleat, an LUL approved cable cleat for securing cables. The cleat can be used for cable diameters between 51-200mm, is manufactured from aluminum alloy, and has a two-piece, two fixing design. It is suitable for use in both low and high voltage cable applications and across a wide range of temperatures from -60°C to +105°C. Variants include epoxy coated versions for harsh environments and optional rubber liners.
25kV Cable Termination - 3M Cold Shrink 95-EP-631-2 - Network Rail PADS Approved
25kV Cable Termination - 3M Cold Shrink 95-EP-631-2 - Network Rail PADS ApprovedThorne & Derrick International
25kV Cable Joints & Cable Terminations
3M Cold Shrink High Voltage Cable Joints and Cable Terminations carry Network Rail approvals for 6.35/11kV, 25kV and 19/33kV polymeric power cables. Prysmian 25kV single core power cables are used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C. electrified lines. T&D UK provide on-going 25kV cable jointer training either in house or on site for 3M Cold Shrink joints and terminations.
High Voltage Rail Cable Joints & Cable Terminations - 6.35/11kV, 12.7/22kV and 19/33kV cables distribute three phase A.C. electrical power supplies at nominal system voltages of 11kV, 22kV and 33kV to Network Rail traction substations on D.C. electrified lines. 25kV two core concentric cables are mainly used to deliver 25kV single phase electrical power supplies, typically, to Network Rail feeder stations on A.C. electrified lines. 25kV single core cables are mainly used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C electrified lines - T&D stock heat shrink and cold shrink cable joints and terminations for all these rail cable applications.
Hellermann Tyton Cable Ties - Hazardous Area Oil & Gas
This document discusses innovative product solutions for hazardous environments from a company. It describes their design process and development competence, including two flagship products - a PEEK plastic cable tie that withstands high temperatures and an automated metal tying system. It also provides product details, specifications and applications for these solutions.
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes Thorne & Derrick International
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
This document provides specifications for various models of stainless steel cable ties from the MBT series. It lists the width, length, maximum bundle diameter, material, packaging, and product codes for each tie size. The ties are made of stainless steel 304 or 316 and are designed for use in harsh and corrosive environments. They provide high strength, reliability, and fire resistance. Some models have additional features like double wrapping or polyester coating.
QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV Cables
QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV CablesThorne & Derrick International
2-4/0 (35-120)
-
-
2/0-300 (70-150)
2-4/0 (35-120)
-
4/0-500 (120-240)
2/0-250 (70-150)
250-500
2/0-300 (70-150)
2-4/0 (35-120)
2-2/0 (35-70)
7664-S-HSG-8 200kV
0.83-1.53 (21,1-38,9)
500-750Dairy Delivery Hose and Dairy Hose Assemblies
We at JGB Enterprises, Inc. take great care to ensure your product comes out tasting just as great as it did going in. JGB Enterprises supplies hoses and fittings that meet 3A, FDA and USDA standards for the pure transfer of solids and liquids. Dairy Delivery Hose and Dairy Hose Assemblies are for milk, beer, wine, distillery and beverage (edible liquid) transfer processing facilities; To Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required. Dairy Delivery Hose are ideal for applications requiring flexible and/or tight bend connections. All hoses are FDA/USDA compliant & conforms to a 3-A Sanitary Standard.
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...Thorne & Derrick International
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.Prysmian BICON 374 Plastic Two Bolt Cable Cleats - Spec Sheet
The two-piece plastic two bolt cleat is suitable for securing cables with diameters between 50-94mm. It is manufactured from black nylon 66 that is resistant to corrosion from oils and chemicals as well as UV light and weather. The cleat has a two-piece, two fixing design and can be double stacked on common fixings while operating in temperatures from -25°C to +85°C.
3M 8423-6 Cold Shrink Tube
3M Brand PST Cold Shrink Connector Insulators are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The insulators are made of EPDM rubber and are installed by removing the core, allowing the tube to shrink and form a waterproof seal around the cable or connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
nForcer product_data_sheet_
nForcer-20 is a multi-functional drilling fluid additive that contains iron oxide nanoparticles. It can be used with all drilling fluid types at low concentrations, provides superior filtration control and fracture pressure increases. The additive is a red liquid that is insoluble in water but readily dissolves in oil-based fluids. It is packaged in 1000L IBC totes and should be stored in a dry area away from heat and sunlight.
Thomson bsa veethread_specsheet
This document provides information on precision lead screws and supernuts from Ball Screws and Actuators (BS&A). It lists features such as low cost, customization options, variety of sizes, corrosion resistance, and vibration reduction compared to ball screws. It also provides details on material properties, temperature and load limits, accuracy grades, and self-locking characteristics. The document is intended to help customers understand and select the appropriate lead screw solutions for their linear motion needs.
Adjustable steel props leaflet
Adjustable steel props are designed to support floors and beams temporarily. They are manufactured from an outer tube and inner tube welded together to be lightweight. Props come in sizes No.0 to No.4 and are guaranteed to be delivered within 3 days of an order. All props are manufactured according to ISO quality standards.
DU pre-insulated-tubing-series-2200
This document provides information on Unitherm's Series 2200 pre-insulated tubing. It is comprised of an inner process tube, fiberglass insulation, and an outer protective PVC jacket. It is designed to transport fluids like steam or gas at temperatures up to 400°F while maintaining a maximum jacket temperature of 140°F. Additional features include compact design, low heat loss, durability, and cost savings over field fabrication. It has applications in steam, condensate, gas, and liquid transport lines.
Custom Plastic Pipe Extrusions- Product Catalog
Download this catalog for custom plastic extrusions used in various industries with high quality materials in different sizes and colors.
Donit Case Study: Steam Trap Valve Seal
One of our customers was faced with steam trap valve challenge. We are talking about saturated and superheated
steam at 46 bar and 400°C. Previous graphite gasket materials applied to the valve broke up during installation, as
they were instable and prone to friction movement. Pieces of remaining gasket had to be removed and seating of the
gasket to be cleaned.
RAYCHEM RPG CABLE TIE STOCKIST-AKBAR TRADING EST-Stainless Steel Ball Lock Ca...
Stainless Steel Ball Lock Cable Ties, CoatedStainless Steel Ball Lock Cable Ties, Heavy DutyBall Lock Cable Ties FeaturesWedge Lock MechanismMultiColour Spectrum TiesStainless Steel Ball Lock Cable Ties, Spring Type UncoatedStainless Steel Ball Lock Cable Ties, Spring Type CoatedStainless Steel Cable Ties, Ladder Type, UncoatedStainless Steel Cable Ties, Ladder Type, CoatedStainless Steel Cable Ties, Releasable Type, UncoatedStainless Steel Cable Ties, Releasable Type, PPA 571 Coated
Stainless Steel Band for Corrosive Atmospheric ApplicationCenter Punch Preformed ClampsR-Loc Alfa-Numeric Characters (Marker Tags)Type ApprovalsCarrier Strips - Coated / UncoatedRigorous Tests & Physical Properties of R-Loc Clamping ProductsR-Loc Marker Plates & TagsLaboratory Testing Facilities for R-Loc Clamping ProductsR-Loc Custom Marked Tags (Laser & Embossed)Pre-cut Assembled Straps - Jaw TypePre-cut Assembled Straps - Wing TypeStainless Steel Band for High Tensile ApplicationUtility BandsHeavy Duty BandsBands & Buckles Application ProcessPPA 571 Coated Bands for Highly Corrosive ApplicationsPVC Coated BandsAll Purpose Bands-for easy and fast installationAluminium Perforated Strip-for easy and fast installationToolsBuckles-Jaw TypeBuckles-Wing TypeBuckles-Screw TypeSign Mounting Brackets
8443-2 3M Silicone Rubber Cold Shrink Insulators
This document provides a summary of 3M's 8440 Series silicone rubber cold shrink connector insulators. It describes the product as open-ended, tubular sleeves that are factory expanded and shrink to form a tight seal when installed. The document lists the product's key features such as being simple to install without tools or heat, resisting moisture and chemicals, and having an operating temperature range of -55°C to 260°C. It also provides application examples, specifications, test data on performance properties, and ordering information.
X-500 400ML
---------------------
WDB CO., LTD
Phòng 101, lầu 1, số 6, đường Thiên Phát, Phường Trương Quang Trọng, Thành phố Quảng Ngãi, Tỉnh Quảng Ngãi, Việt Nam
☎️ (0255) 6 28 28 28
info@wdb.ltd
Gray PVC Discharge Hose – Water Discharge Hose
Gray PVC Discharge Hose is for light duty water discharge service in agricultural, quarry, irrigation, mining, construction and industrial applications.
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
Red heavy duty lay flat water discharge hose for use with higher working pressures in agricultural, quarry, mining, industrial, and construction applications. It is reinforced with two spiral plies and longitudinal synthetic cords for strength, and comes with standard short shank aluminum, malleable, or brass couplings.
1.5" to 8" ID
More Related Content
What's hot
Techfluid Drilling & Production Hose
Techfluid manufactures our own bonded rubber Mud, Cement and Tensioner hoses with spirally laid high tensile steel cable reinforcement and one-piece bonded in end couplings. The hoses are mandrel built in continuous lengths up to 70 metres and vulcanised to form a fully bonded hose offering high integrity and excellent flexibility. Our range covers pressures up to 15,000psi in sizes up to 16”.
Prysmian BICON 370 2 Bolt Cable Cleats - Spec Sheet
The document provides specifications for the Aluminium Two Bolt Cleat, an LUL approved cable cleat for securing cables. The cleat can be used for cable diameters between 51-200mm, is manufactured from aluminum alloy, and has a two-piece, two fixing design. It is suitable for use in both low and high voltage cable applications and across a wide range of temperatures from -60°C to +105°C. Variants include epoxy coated versions for harsh environments and optional rubber liners.
25kV Cable Termination - 3M Cold Shrink 95-EP-631-2 - Network Rail PADS Approved
25kV Cable Termination - 3M Cold Shrink 95-EP-631-2 - Network Rail PADS ApprovedThorne & Derrick International
25kV Cable Joints & Cable Terminations
3M Cold Shrink High Voltage Cable Joints and Cable Terminations carry Network Rail approvals for 6.35/11kV, 25kV and 19/33kV polymeric power cables. Prysmian 25kV single core power cables are used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C. electrified lines. T&D UK provide on-going 25kV cable jointer training either in house or on site for 3M Cold Shrink joints and terminations.
High Voltage Rail Cable Joints & Cable Terminations - 6.35/11kV, 12.7/22kV and 19/33kV cables distribute three phase A.C. electrical power supplies at nominal system voltages of 11kV, 22kV and 33kV to Network Rail traction substations on D.C. electrified lines. 25kV two core concentric cables are mainly used to deliver 25kV single phase electrical power supplies, typically, to Network Rail feeder stations on A.C. electrified lines. 25kV single core cables are mainly used to carry 25kV electrical power supplies from Network Rail track-side switching stations to the overhead line equipment on A.C electrified lines - T&D stock heat shrink and cold shrink cable joints and terminations for all these rail cable applications.
Hellermann Tyton Cable Ties - Hazardous Area Oil & Gas
This document discusses innovative product solutions for hazardous environments from a company. It describes their design process and development competence, including two flagship products - a PEEK plastic cable tie that withstands high temperatures and an automated metal tying system. It also provides product details, specifications and applications for these solutions.
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes Thorne & Derrick International
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Helashrink heatshrink boots and moulded shapes in conjunction with specialist heatshrink tubing make it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems.
Hellermann Tyton Helashrink heatshrink boots (straight and right-angled) and moulded shapes are available for the complete range of electrical and electronic harnessing applications. Heat shrink boots and shapes can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished with minimum weight and bulk using Hellermann Tyton Helashrink heat shrink components.
Hellermann Tyton Heat Shrink Moulded Shapes & Boots - Overview....
Hellermann Tyton Helashrink heat shrinkable shapes, end caps and cable break-out boots with and without inner adhesive. Hellermannn Tyton heat shrink backshells, 2-way outlet shapes, 3-way outlet shapes, 4-way outlet shapes, 5-way outlet shapes up to 6-way outlet shapes. Hellermann Tyton heat shrink right angle boot 90°, 45°C angle, T-shapes, Y-outlet, VG-style shapes. Heat shrink cable end caps for low voltage applications, two components epoxy adhesive and hot melt tape.
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
This document provides specifications for various models of stainless steel cable ties from the MBT series. It lists the width, length, maximum bundle diameter, material, packaging, and product codes for each tie size. The ties are made of stainless steel 304 or 316 and are designed for use in harsh and corrosive environments. They provide high strength, reliability, and fire resistance. Some models have additional features like double wrapping or polyester coating.
QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV Cables
QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV CablesThorne & Derrick International
2-4/0 (35-120)
-
-
2/0-300 (70-150)
2-4/0 (35-120)
-
4/0-500 (120-240)
2/0-250 (70-150)
250-500
2/0-300 (70-150)
2-4/0 (35-120)
2-2/0 (35-70)
7664-S-HSG-8 200kV
0.83-1.53 (21,1-38,9)
500-750Dairy Delivery Hose and Dairy Hose Assemblies
We at JGB Enterprises, Inc. take great care to ensure your product comes out tasting just as great as it did going in. JGB Enterprises supplies hoses and fittings that meet 3A, FDA and USDA standards for the pure transfer of solids and liquids. Dairy Delivery Hose and Dairy Hose Assemblies are for milk, beer, wine, distillery and beverage (edible liquid) transfer processing facilities; To Transfer of milk, juice, beer, soft drinks, pharmaceuticals, cosmetics or water-based products requiring an FDA sanitary hose. It is also suitable for many dry bulk products via suction, pneumatic or gravity where a sanitary hose is required. Dairy Delivery Hose are ideal for applications requiring flexible and/or tight bend connections. All hoses are FDA/USDA compliant & conforms to a 3-A Sanitary Standard.
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...Thorne & Derrick International
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.Prysmian BICON 374 Plastic Two Bolt Cable Cleats - Spec Sheet
The two-piece plastic two bolt cleat is suitable for securing cables with diameters between 50-94mm. It is manufactured from black nylon 66 that is resistant to corrosion from oils and chemicals as well as UV light and weather. The cleat has a two-piece, two fixing design and can be double stacked on common fixings while operating in temperatures from -25°C to +85°C.
3M 8423-6 Cold Shrink Tube
3M Brand PST Cold Shrink Connector Insulators are open-ended, tubular rubber sleeves that are factory expanded and assembled onto a removable core. They are used to provide primary electrical insulation and physical protection for cable splices and connections rated up to 1000 volts. The insulators are made of EPDM rubber and are installed by removing the core, allowing the tube to shrink and form a waterproof seal around the cable or connection. They can be used for indoor, outdoor, overhead, buried, or submerged applications without additional heat or adhesives.
nForcer product_data_sheet_
nForcer-20 is a multi-functional drilling fluid additive that contains iron oxide nanoparticles. It can be used with all drilling fluid types at low concentrations, provides superior filtration control and fracture pressure increases. The additive is a red liquid that is insoluble in water but readily dissolves in oil-based fluids. It is packaged in 1000L IBC totes and should be stored in a dry area away from heat and sunlight.
Thomson bsa veethread_specsheet
This document provides information on precision lead screws and supernuts from Ball Screws and Actuators (BS&A). It lists features such as low cost, customization options, variety of sizes, corrosion resistance, and vibration reduction compared to ball screws. It also provides details on material properties, temperature and load limits, accuracy grades, and self-locking characteristics. The document is intended to help customers understand and select the appropriate lead screw solutions for their linear motion needs.
Adjustable steel props leaflet
Adjustable steel props are designed to support floors and beams temporarily. They are manufactured from an outer tube and inner tube welded together to be lightweight. Props come in sizes No.0 to No.4 and are guaranteed to be delivered within 3 days of an order. All props are manufactured according to ISO quality standards.
DU pre-insulated-tubing-series-2200
This document provides information on Unitherm's Series 2200 pre-insulated tubing. It is comprised of an inner process tube, fiberglass insulation, and an outer protective PVC jacket. It is designed to transport fluids like steam or gas at temperatures up to 400°F while maintaining a maximum jacket temperature of 140°F. Additional features include compact design, low heat loss, durability, and cost savings over field fabrication. It has applications in steam, condensate, gas, and liquid transport lines.
Custom Plastic Pipe Extrusions- Product Catalog
Download this catalog for custom plastic extrusions used in various industries with high quality materials in different sizes and colors.
Donit Case Study: Steam Trap Valve Seal
One of our customers was faced with steam trap valve challenge. We are talking about saturated and superheated
steam at 46 bar and 400°C. Previous graphite gasket materials applied to the valve broke up during installation, as
they were instable and prone to friction movement. Pieces of remaining gasket had to be removed and seating of the
gasket to be cleaned.
RAYCHEM RPG CABLE TIE STOCKIST-AKBAR TRADING EST-Stainless Steel Ball Lock Ca...
Stainless Steel Ball Lock Cable Ties, CoatedStainless Steel Ball Lock Cable Ties, Heavy DutyBall Lock Cable Ties FeaturesWedge Lock MechanismMultiColour Spectrum TiesStainless Steel Ball Lock Cable Ties, Spring Type UncoatedStainless Steel Ball Lock Cable Ties, Spring Type CoatedStainless Steel Cable Ties, Ladder Type, UncoatedStainless Steel Cable Ties, Ladder Type, CoatedStainless Steel Cable Ties, Releasable Type, UncoatedStainless Steel Cable Ties, Releasable Type, PPA 571 Coated
Stainless Steel Band for Corrosive Atmospheric ApplicationCenter Punch Preformed ClampsR-Loc Alfa-Numeric Characters (Marker Tags)Type ApprovalsCarrier Strips - Coated / UncoatedRigorous Tests & Physical Properties of R-Loc Clamping ProductsR-Loc Marker Plates & TagsLaboratory Testing Facilities for R-Loc Clamping ProductsR-Loc Custom Marked Tags (Laser & Embossed)Pre-cut Assembled Straps - Jaw TypePre-cut Assembled Straps - Wing TypeStainless Steel Band for High Tensile ApplicationUtility BandsHeavy Duty BandsBands & Buckles Application ProcessPPA 571 Coated Bands for Highly Corrosive ApplicationsPVC Coated BandsAll Purpose Bands-for easy and fast installationAluminium Perforated Strip-for easy and fast installationToolsBuckles-Jaw TypeBuckles-Wing TypeBuckles-Screw TypeSign Mounting Brackets
8443-2 3M Silicone Rubber Cold Shrink Insulators
This document provides a summary of 3M's 8440 Series silicone rubber cold shrink connector insulators. It describes the product as open-ended, tubular sleeves that are factory expanded and shrink to form a tight seal when installed. The document lists the product's key features such as being simple to install without tools or heat, resisting moisture and chemicals, and having an operating temperature range of -55°C to 260°C. It also provides application examples, specifications, test data on performance properties, and ordering information.
X-500 400ML
---------------------
WDB CO., LTD
Phòng 101, lầu 1, số 6, đường Thiên Phát, Phường Trương Quang Trọng, Thành phố Quảng Ngãi, Tỉnh Quảng Ngãi, Việt Nam
☎️ (0255) 6 28 28 28
info@wdb.ltd
What's hot (20)
Prysmian BICON 370 2 Bolt Cable Cleats - Spec Sheet
Prysmian BICON 370 2 Bolt Cable Cleats - Spec Sheet
25kV Cable Termination - 3M Cold Shrink 95-EP-631-2 - Network Rail PADS Approved
25kV Cable Termination - 3M Cold Shrink 95-EP-631-2 - Network Rail PADS Approved
Hellermann Tyton Cable Ties - Hazardous Area Oil & Gas
Hellermann Tyton Cable Ties - Hazardous Area Oil & Gas
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Heat Shrink Cable Boots, Transitions & Moulded Shapes
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
Hellermann Tyton Stainless Steel Cable Ties with Ball-Lock
QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV Cables
QT111 Cold Shrink Silicone Rubber 3M Cable Terminations For MV HV Cables
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Prysmian BICON 374 Plastic Two Bolt Cable Cleats - Spec Sheet
Prysmian BICON 374 Plastic Two Bolt Cable Cleats - Spec Sheet
RAYCHEM RPG CABLE TIE STOCKIST-AKBAR TRADING EST-Stainless Steel Ball Lock Ca...
RAYCHEM RPG CABLE TIE STOCKIST-AKBAR TRADING EST-Stainless Steel Ball Lock Ca...
Similar to Avalanche® 2000 II Hose - Snow Making Hose
Gray PVC Discharge Hose – Water Discharge Hose
Gray PVC Discharge Hose is for light duty water discharge service in agricultural, quarry, irrigation, mining, construction and industrial applications.
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
Red heavy duty lay flat water discharge hose for use with higher working pressures in agricultural, quarry, mining, industrial, and construction applications. It is reinforced with two spiral plies and longitudinal synthetic cords for strength, and comes with standard short shank aluminum, malleable, or brass couplings.
1.5" to 8" ID
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge Hose
This document provides specifications for Green/Clear PVC Suction & Discharge Hose from JGB Enterprises. It lists various sizes of hoses with their dimensions, minimum bend radii, vacuum and pressure ratings, burst pressures, weights, and standard lengths. The hoses feature smooth inner and outer surfaces, an elliptical helix for strength and flexibility, and transparency for viewing material flow. They are suitable for uses like dewatering pumps, mining, water suction, agriculture, drainage, and irrigation between -10°F and 140°F.
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge Hose
Green/Clear PVC Suction & Discharge Hose - Water Suction and Discharge Hose - Standard Duty Green/Clear PVC Suction Hose is a MSHA approved flame-resistant suction and discharge hose for use in mines, pumps, irrigation lines, drain lines, air seeders, agricultural liquid fertilizer, rock dusting, rental and construction dewatering, trash, and standard-duty water suction or de-watering. Smooth inner and outer surface. MSHA Approved. Water suction – standard duty hose.
Eagle Water Jetting Hose – Waterblast Hose
Eagle Water Jetting Hose – High Pressure Water Jetting Hose - Waterblast Hose - Stripping layers from hard surfaces, strip mining and washdown applications.
3M Cold Shrink QS-III Inline Splice Kits 35kV - 5467A, 5467A-WG, 5468A, 5468A-WG
3M Cold Shrink QS-III Inline Splice Kits 35kV - 5467A, 5467A-WG, 5468A, 5468A-WGThorne & Derrick International
The document provides product information for 3M Cold Shrink QS-III Inline Splice Kits for splicing jacketed concentric neutral and concentric neutral power cables rated for 35kV. The kits are for splicing copper or aluminum cables ranging from 1/0 AWG to 1000 kcmil. They use a cold shrink design and silicone rubber construction. Testing shows the splices meet or exceed IEEE standards for 35kV voltage class ratings.M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous Areas
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous AreasThorne & Derrick International
The document describes a flameproof barrier gland for use with flexible conduit systems. It has nickel plated brass construction with a compound barrier seal. It can be used in hazardous zones 1, 2, 21, and 22. It has IP66-IP69K ratings for indoor and outdoor use from -60°C to +85°C. It connects various liquid tight flexible conduits for applications in petrochemical plants, refineries, and other industries.Nvd 805 check valve
This document provides specifications for the Danfoss NVD 805 non-return valve. It is available in sizes from DN50 to DN600, with Kv values ranging from 39.4 to 11269 m3/h. It features a double plate closing system with a return spring and metal-elastomer sealing. It is designed for horizontal or vertical installation in pumping, water supply, and general industrial applications handling water or glycol mixtures up to 50% and temperatures from 10 to 100°C.
Mil qualified-connectors-pei-genesis
The document provides contact location information for ITT connector products worldwide. It lists specific location details including addresses and phone/fax numbers for offices in Germany, Hong Kong, Italy, and the UK, as well as the USA. It also includes a table of contents for specifications and product information on Cannon CA-Bayonet connectors.
JGB Industrial Hose – Industrial Rental Catalog
Hoses, Fittings, Hose Assemblies
JGB Enterprises, Inc. presents Suction Hose, Discharge Hose, Air Hose, Hydraulic Hose, Pressure Washer / Wash Down Hose, Miscellaneous Hose, Cam Locks, Water Shanks, Bauer Style Fittings, King Combination Nipples, Strainers & Skimmers, Air Hose, Universal “Chicago” Fittings, Quick Couplings, Ground Joint “Boss“ Fittings.
Eagle Contractors Water Hose - Water Washdown Hose
JGB Enterprises Eagle Contractors Water Hose is traditional black rubber water hose assembly with bend restrictor reinforced with spiral polyester yarns and coupled with standard M x F Garden Hose Thread (GHT) solid brass fittings. It is available in 25, 50, 75, and 100 foot lengths.
5/8" and 3/4" ID
Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-6
Cold Shrink Tubes 3M
3M 8427-6 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8427-12
Cold Shrink Tubes 3M
3M 8427-12 Cold Shrink Tubes 17.5mm-33.0mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8427-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8428-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8428-12
Cold Shrink Tubes 3M
3M 8428-12 Cold Shrink Tubes 24.0mm-49.3mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8428-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8429-9
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8429-9 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 229mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-9 - Typical Applications
* Insulation and sealing of inline cable splices and electrical connectors
* Primary electrical insulation up to 1kV for cold shrink cable repairs
* Conduit and cable breakout sealing - moisture barrier
* Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8428-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8428-6 Cold Shrink Tubes 24.0mm-49.3mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8428-6 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold shrink splice kit 3 m 8428 18
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is withdrawn. PST tubes provide insulation, protection from water and chemicals, and can be used for both indoor and outdoor applications including direct burial.
Cold Shrink Splice Kit 3M 8427-16
3M produces Cold Shrink EPDM Tubes called PST Connector Insulators that are used to insulate electrical connections. The tubes are made of EPDM rubber and come in various sizes to accommodate different cable diameters. They are pre-stretched and shrink to form a waterproof seal around connections when a removable core is pulled out. PST tubes provide insulation for cable splices and connections rated up to 1000 volts both indoors and outdoors. They can be directly buried, submerged, or used overhead and install without heat or flame simply using hands.
Cold Shrink Splice Kit 3M 8429-6
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Tubes 3M
3M 8429-6 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 152mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-6 - Typical Applications
* Insulation and sealing of inline cable splices and electrical connectors
* Primary electrical insulation up to 1kV for cold shrink cable repairs
* Conduit and cable breakout sealing - moisture barrier
* Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Cold Shrink Splice Kit 3M 8429-12
Cold Shrink Tubing for LV Cable Splices, Repair, Protection & Insulation - 3M
Cold Shrink Splice Kit 3M 8429-12
Cold Shrink Tubes 3M
3M 8429-12 Cold Shrink Tubes 32.2mm-67.8mm Diameters - 305mm Length
3M Cold Shrink Splices & Splicing Kits are designed using the unique cold shrink delivery system developed by 3M - cold shrink tubes are supplied pre-stretched on a removable core for efficiency and ease of installation.
Cold shrink tubes provide a constant radial pressure and seal without adhesive allowing for cable or pipe expansion and contraction after installation - 3M Cold Shrink is simple and fast to install, no tools or "hot-working" required for use in potentially explosive and hazardous area atmospheres, including Zones 1 and Zones 2.
3M Cold Shrink Splice Tubes 8429-12 - Typical Applications
Insulation and sealing of inline cable splices and electrical connectors
Primary electrical insulation up to 1kV for cold shrink cable repairs
Conduit and cable breakout sealing - moisture barrier
Tubes available in EPDM rubber and silicone (Low Smoke & Fume LSF)
Cold Shrink Tubes 3M : EPDM rubber cold shrink tubes provide cable sealing, protection and insulation for low voltage (LV) power cables up to 1000 volts. Tough EPDM 3M cold shrink rubber tubes are suitable for underground cable joints and direct burial. Resistant to acids and alkalis. Resistant to fungi, ozone and UV light to seal, protect and insulate outdoor cables.
How ?
3M Cold Shrink tubes are open-ended, tubular rubber sleeves, which are factory expanded onto a removable core. The core is removed after the cold shrink tube has been positioned for installation over an inline connection, splice or cable lug, allowing the cold shrink tube to shrink and form a waterproof seal. Cold shrink tubes provide a quicker, safer and easier sealing solution for cables and pipes than heat shrink - no "hot-work" permit required for oil, gas and petrochemical site installations. T&D stock an extensive range of 3M Cold Shrink Tubes and Tubing.
3M Cold Shrink Tubes meet worldwide standards ANSI, IEEE, VDE, JCAA, REA and CSA.
Similar to Avalanche® 2000 II Hose - Snow Making Hose (20)
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
Eagle Red PVC HD Discharge Hose – Water Discharge Hose
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge Hose
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge Hose
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge Hose
Eagle PVC Water Suction Hose – Green/Clear PVC Water Suction & Discharge Hose
3M Cold Shrink QS-III Inline Splice Kits 35kV - 5467A, 5467A-WG, 5468A, 5468A-WG
3M Cold Shrink QS-III Inline Splice Kits 35kV - 5467A, 5467A-WG, 5468A, 5468A-WG
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous Areas
M25 Conduit ATEX & Flameproof EXD Barrier Glands Zone 1 & Zone 2 Hazardous Areas
Eagle Contractors Water Hose - Water Washdown Hose
Eagle Contractors Water Hose - Water Washdown Hose
More from JGB Enterprises, Inc.
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...JGB Enterprises, Inc.
Sandblast hose specifically designed for use in all abrasive blast applications and suitable for all blasting media. Thunderblast® hose features a static conductive natural rubber tube with four ply high tensile steel wire reinforcement, and an abrasion resistant SBR cover. It is available in 200 ft. rolls or 50 assemblies coupled with quick disconnects or nozzle holder ends.
1/2", 3/4", and 1" ID
-22°F to +185°F
Steel NPT Wire Strainer - Hose Accessories
Square Hole Ring Welded Basket Strainer. The Steel NPT Wire Basket Strainer can be fixed to suction lines or non-return valves to filter any large particles that may cause pump damage.
Pressure Wash Hose & Gun Kit - Hose Accessories
Pressure Wash Hose and Gun Kit - Hose Accessories. Designed for use on pressure washer machines with working pressures up to 4000 psi and temperatures up to 300°F. Comes in 100 ft. lengths.
J-FLEX Hydraulic Hose – Specialty Snow Grooming
J-FLEX specialty, medium to high pressure hydraulic hose for snow making.
High Pressure SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire. Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
J-FLEX® 2M 2SN/SAE 100R2AT for medium to high pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
J-FLEX® Hot Oil 2SC Hose – Hydraulic Oilfield Hose
Hydraulic Oilfield Hose. High Temperature Oil Hose - 2350 PSI - Specially formulated high temperature oil hose.
J-FLEX 16 SAE 100R16 Hose - Hydraulic Hose
Medium - High Pressure Hydraulic Hose. SAE 100R16 hydraulic hose consists of 1 or 2 braids of steel-wire reinforcement, and is used for high-pressure hydraulic applications requiring high flexibility and tight bends. The cover is oil and weather resistant synthetic rubber.
This hose is designed to be used with hydraulic oils, minerals, and vegetable lubricants. It is a medium pressure hydraulic hose with various cover available. It comes standard with an anti-abrasion synthetic rubber cover.
1/4" to 1" ID
-40° to 212°F
J-FLEX 15M SAE 100R15 Hose - Hydraulic Hose
High Peak Pressure Hydraulic Hose with Improved Flexibility. SAE 100R15 hydraulic hose is only for use with petroleum-based hydraulic fluids. The hose has multiple spiral plies of heavy wire wrapped in alternating directions. A braid or ply of material may be used over or within the inner tube and/or over the wire reinforcement to bind the wire and rubber.
This hose is compatible with biodegradable hydraulic fluids like vegetable oil as well as mineral and glycol based hydraulic fluids. It consists of an inner tube of oil-resistant special synthetic rubber, 4 or 6 spiral plies of heavy wire wrapped in nating directions, and an oil, abrasion, and weather-resistant special rubber cover. A MSHA cover is available.
3/4" to 1-1/2" ID
-40°F to +248°F (+257 °F discontinuous)
J-FLEX 12M SAE 100R12 Hose - Hydraulic Hose
High Pressure Hydraulic Hose. SAE 100R12 hydraulic hose for petroleum and water-based hydraulic fluid. It contains 4 spiral plies of heavy wire wrapped in alternating directions. One braid or ply of material may be used over the inner tube and/or over the wire reinforcement binding the synthetic rubber to the wire.
Reinforced with four high tensile steel spirals, this hose is designed for hydraulic systems with high peak pressures and arduous operating conditions. The special synthetic cover is designed to resist hydraulic oil, weather, and abrasion. The synthetic rubber tube is resistant to mineral, vegetable, and glycol based hydraulic oils. A MSHA cover is available.
3/8" to 2" ID
-40°F to 248°F (257°F intermittent)
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose - Hydraulic systems with high peak pressures and arduous operating conditions needing extremely high flexibility. Due to its extreme flexibility, XFlex is perfect for use in extraordinarily tight positions. Tube: Oil-resistant synthetic rubber.
J-FLEX 4 SAE 100R4 Hydraulic Hose - Aromatic Resistant Hydraulic Return Hose
SAE 100R4 hydraulic hose with one or more plies of woven or braided textile fibers and a spiral of body wire. It is used most often for return and suction lines in low pressure and vacuum applications.
This hose is for use in low pressure hydraulic systems to return the oil to tank for reuse. It is resistant to aromatic content less than 40%. Working pressures range from 56 to 300 PSI depending on ID size. It comes in lengths up to 200 feet.
3/4" to 3" ID
-40°F to 212°F
J-FLEX 2SN5K Exceeds 100R2AT Hose - Hydraulic Hose
J-FLEX 2SN5K Exceeds 100R2AT hose was developed to withstand punishing conditions such as pulsating pressures, hose flexing, and temperature fluctuations with petroleum based hydraulic fluids. A MSHA accepted cover is available for this hose cover. This has extraordinary flexibility; excellent bend radii properties; superior performance under flex-impulse conditions; exceptional long life.
J-FLEX® 1 SAE 100R1AT/1SN Hose – Hydraulic Hose
Designed for low to medium pressure hydraulic systems in industry and agriculture. The synthetic rubber tube is resistant to hydraulic fluids, and the MSHA approved synthetic rubber cover is abrasion and ozone resistant. Various covers are available for this hose.
1/4" to 1" ID
-40°F to 212°F (max 248° intermittent)
EAGLE VAC Hose - Material Handling Hose
EAGLE VAC Hose - Special Design Abrasive Suction Hose. Special hose for high performance suction equipment for transport of dry or wet media such as mud, sand or blasting media.
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose - Polyurethane Lined Hose for Abrasives Handling.
For abrasive material handling such as pellets, rocks, sands, chips, grains transfer; sand shot line, bark blow line, lawn/mulch/straw collection; industrial vacuum cleaning.
. Eagle Tank® Truck 300 PSI Hose - Corrugated Hose - Oilfield Hose
Eagle Tank® Truck 300 PSI Hose - a corrugated, oil resistant, petroleum suction & discharge hose designed for the transport off mineral oil products and fuel mixtures with up to 50% aromatic content.
2", 3", 4", 6" & 8" ID
-40°F to 180°F
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose. The hose is constructed of a black oil and fuel-resistant rubber tube and reinforced with synthetic textile and a twin steel wire helix for heavy-duty suction of petroleum products at 150 psi. It is for use in bulk petroleum stations, tank trucks, and in-plant oil service. The cover is abrasion, ozone, weather, heat & oil resistant.
1-1/2" to 8" ID
Eagle Honey Bee Liquid Suction & Wastewater Hose
This document provides information on the Eagle Honey Bee Hose from JGB Enterprises for pumping, rental, construction dewatering, trash pumps, septic and wastewater handling applications. It lists specifications for polyethylene tube and rib reinforced hoses in 2-inch and 3-inch diameters with temperature ranges from -40°F to 150°F. Features highlighted include superior flexibility, remaining flexible in sub-zero temperatures, being crush resistant and easy to slide, and having leak proof cuffed ends.
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose. Specially designed for use in portable, work-over and seismograph drilling rigs, this hose is reinforced with 4 or 6 spiral wires and has a cover that is abrasion, ozone, hydrocarbon and flame resistant. The tube is oil resistant synthetic rubber. It can withstand temperatures up to 200° F (+93° C) in constant operation.
1" to 3" ID
-40°F to 200°F
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose designed for anti-static tank truck vapor recovery.
Features:
Biofuel Compatible - Revolutionary polyurethane compound! Specially designed to handle gasoline, ethanol (Meeting ASTM D5798, D4806 or D6751 criteria.), diesel and biodiesel (Meeting ASTM D5798, D4806 or D6751 criteria.) vapors... and still keeps all the other great features and benefits!
Non-permeable polyurethane construction -won’t swell or become stiff like conventional TPR/rubber hoses.
Long life reduces operating costs.
Lightweight - much lighter than conventional TPR/rubber hoses.
Superior flexibility - especially in sub-zero weather!
“See-through” construction - for visual confirmation if fuel backs up into the vapor recovery system.
Grounding Wire - Durable multi-strand copper wire dissipates static electricity. Physically extract wire from the rigid helix and bond to the metal coupling (or by other means) to ground.
Easy Slide Helix - Rigid counter clockwise helix design protects hose tube from cover wear; allows hose to slide easily over rough surfaces
Eagle Pump® HD 150 PSI Hose - Water Suction & Discharge Hose
This hose is a water suction and discharge hose made of natural and synthetic rubber for use in medium to heavy-duty industrial and construction applications.
2" to 12" ID
More from JGB Enterprises, Inc. (20)
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...
Thunderblast® Sandblast Hose 2/4 Ply - Material Handling Hose - Bulk Transfer...
J-FLEX® Hot Oil 2SC Hose – Hydraulic Oilfield Hose
J-FLEX® Hot Oil 2SC Hose – Hydraulic Oilfield Hose
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose
J-FLEX® XFlex Hose - J-FLEX® 4SH XFLEX Hydraulic Hose
J-FLEX 4 SAE 100R4 Hydraulic Hose - Aromatic Resistant Hydraulic Return Hose
J-FLEX 4 SAE 100R4 Hydraulic Hose - Aromatic Resistant Hydraulic Return Hose
J-FLEX 2SN5K Exceeds 100R2AT Hose - Hydraulic Hose
J-FLEX 2SN5K Exceeds 100R2AT Hose - Hydraulic Hose
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose
Eagle UREMAT & UREMAT HD Hose - Material Handling Hose
. Eagle Tank® Truck 300 PSI Hose - Corrugated Hose - Oilfield Hose
. Eagle Tank® Truck 300 PSI Hose - Corrugated Hose - Oilfield Hose
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose
Eagle Tank® Truck 150 Hose - Petroleum Hose - Petro Transfer Hose
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose
Eagle Slim Hole Rotary Hose - Oilfield Drilling Hose - Rotary Drilling Hose
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose
Eagle PU Vapor Recovery Hose - Tank Truck Vapor Recovery Hose - Petroleum Hose
Eagle Pump® HD 150 PSI Hose - Water Suction & Discharge Hose
Eagle Pump® HD 150 PSI Hose - Water Suction & Discharge Hose
Recently uploaded
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
The Genesis of BriansClub.cm Famous Dark WEb Platform
BriansClub.cm, a famous platform on the dark web, has become one of the most infamous carding marketplaces, specializing in the sale of stolen credit card data.
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Leaders who possess self-awareness deeply understand their emotions, strengths, and weaknesses.
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Building Your Employer Brand with Social Media
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Top mailing list providers in the USA.pptx
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night Mastering B2B Payments Webinar from BlueSnap
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Creative Web Design Company in Singapore
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
“After being the most listed dog breed in the United States for 31
years in a row, the Labrador Retriever has dropped to second place
in the American Kennel Club's annual survey of the country's most
popular canines. The French Bulldog is the new top dog in the
United States as of 2022. The stylish puppy has ascended the
rankings in rapid time despite having health concerns and limited
color choices.”
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The Radar reflects input from APCO’s teams located around the world. It distils a host of interconnected events and trends into insights to inform operational and strategic decisions. Issues covered in this edition include:
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Recently uploaded (20)
The Genesis of BriansClub.cm Famous Dark WEb Platform
The Genesis of BriansClub.cm Famous Dark WEb Platform
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
Satta Matka Dpboss Matka Guessing Kalyan Chart Indian Matka Kalyan panel Chart
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
The Heart of Leadership_ How Emotional Intelligence Drives Business Success B...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Fin...
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
How are Lilac French Bulldogs Beauty Charming the World and Capturing Hearts....
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
The APCO Geopolitical Radar - Q3 2024 The Global Operating Environment for Bu...
Avalanche® 2000 II Hose - Snow Making Hose
- 1. Snowmaking Avalanche ® 2000 II JGB Enterprises ® Application: Designed for snowmaking, featuring a high performance construction. Tube: Black, fused thermoplastic which produces an extremely smooth waterway, significantly reducing friction loss compared to conventional liners. Reinforcement: Woven filament polyester Cover: Woven filament polyester Temperature: As low as -55°F (Working) Branding: AVALANCHE® 2000 II Lengths: 50’ and 100’ standard lengths; (* Any Length Available Upon Request) Couplings: Internally expanded aluminum male NPT threaded couplings or high-perfomance, quick disconnect couplings. Part # Nom ID Test Pressure Burst Pressure in mm psi Mpa psi Mpa 023-0249-0802 1 1/2 38.1 800 5.52 2000 13.79 023-0329-0802 2 50.8 800 5.52 2000 13.79 023-0409-0802 2 1/2 63.5 800 5.52 1500 10.34 JGB ® Headquarters Liverpool, NY 13088 (315) 451-2770 Buffalo Branch Cheektowaga, NY 14225 (716) 684-8224 Southeast Hub Charlotte, NC 28273 (704) 588-9920 St. Louis Branch St. Louis, MO 63123 (314) 487-3144 Williston Branch Williston, ND 58801 (701) 774-2195 Houston Branch Pasadena, TX 77503 (281) 930-7777 Click for directions: Download the JGB® Mobile App Connect with us: www.jgbhose.com ISO 9001:2015 Certified ! WARNING: Cancer and - Reproductive Harm www.P65Warnings.ca.gov