D-005 Iso Container Frame
•
3 likes•7,273 views
The document is a fabrication drawing for a corner piece of an ISO container. It provides dimensions and specifications for the corner piece including steel plates, reinforcing webs, casted corners, and pipe dimensions. Notes indicate dimensions may need revision if corner piece dimensions vary and all dimensions are in millimeters unless otherwise noted.
Report
Share
Report
Share
Download to read offline
Recommended
D-001 Tank General Assembly
This document contains drawings and specifications for an ISO tank and container assembly. It includes:
1) Scale drawings of the side view and individual components of a 15,000 liter ISO tank housed within a 20-foot ISO container frame.
2) A parts list identifying the 20-foot ISO frame and 15,000L stainless steel tank.
3) General notes providing details on the tank such as the stainless steel material, pressure ratings, dimensions, access manways, valves, and fittings.
Ansi+b+16 9+reducciones
The document is a catalog listing technical specifications for tubular fittings of various diameters, wall thicknesses, and standards. It provides the nominal diameter, outer diameter, length, and wall thicknesses for fittings according to different SCH (Schedule) standards, as well as the mass of each fitting. Sizes range from 3/4" to 10" nominal diameter and SCH 10 to SCH 160 wall thicknesses.
pipe shedule chart
This document provides specifications for pipe dimensions including nominal pipe size, outside diameter, schedule/wall thickness, and weight. It lists pipe sizes from 1/8 inch to 2-1/2 inches in nominal increments along with the corresponding dimensions and weights in both US customary and metric units. A wide variety of schedule designations are specified for each size providing variation in wall thickness and therefore weight.
Chris brooks storage tanks inspection, maintenance and failure
API 653 tank inspections are important to identify problems and prevent tank failures. Inspections should be conducted by certified inspectors following proper protocols, including visual and ultrasound thickness testing and vacuum testing of floor seams. Tank maintenance includes regular visual inspections, keeping records, and conducting API-653 inspections every five years. Common causes of catastrophic tank failures include improper welding procedures resulting in a lack of weld fusion, not using certified welders, weld deterioration over time, overfilling tanks, and using contractors not qualified to API standards.
M&R Class
1) Tunnel rail damages on containers are often caused during vessel operations when containers are improperly seated on bomb carts. When found, the damaged container should be temporarily repaired at OOS1 within an hour to minimize trucker wait times.
2) Kinked corner posts are usually caused by incorrect stacking on vessels and result in the container needing flatbed delivery for safety. Bent corner castings may also require flatbed delivery.
3) Major damages that compromise a container's structural integrity, such as severed rail connections or large cuts in the sidewalls, render the container unsafe to transport.
Nb 23 2011 part 3 repairs
This document provides information about the National Board Inspection Code for 2011, including its various committees and subgroups that were involved in developing the code. It lists the members of these committees and subgroups, which include representatives from government regulatory agencies, insurance companies, manufacturers, and others. The document also provides contact information for the National Board headquarters and other facilities.
Piping sample report
1. A visual inspection was conducted on the gas gathering sub-header and header circuit at a well room in accordance with API-570 standards, identifying areas needing repair.
2. Significant coating failure and corrosion were found throughout the sub-headers, with wall loss up to 0.020 inches in some areas. U-bolts were also near failure due to corrosion.
3. Recommended repairs included removing corrosion from supports, installing single point contacts, replacing bolts, and cleaning and recoating piping to prevent further corrosion. Ultrasonic thickness readings were above minimums.
Recommended
D-001 Tank General Assembly
This document contains drawings and specifications for an ISO tank and container assembly. It includes:
1) Scale drawings of the side view and individual components of a 15,000 liter ISO tank housed within a 20-foot ISO container frame.
2) A parts list identifying the 20-foot ISO frame and 15,000L stainless steel tank.
3) General notes providing details on the tank such as the stainless steel material, pressure ratings, dimensions, access manways, valves, and fittings.
Ansi+b+16 9+reducciones
The document is a catalog listing technical specifications for tubular fittings of various diameters, wall thicknesses, and standards. It provides the nominal diameter, outer diameter, length, and wall thicknesses for fittings according to different SCH (Schedule) standards, as well as the mass of each fitting. Sizes range from 3/4" to 10" nominal diameter and SCH 10 to SCH 160 wall thicknesses.
pipe shedule chart
This document provides specifications for pipe dimensions including nominal pipe size, outside diameter, schedule/wall thickness, and weight. It lists pipe sizes from 1/8 inch to 2-1/2 inches in nominal increments along with the corresponding dimensions and weights in both US customary and metric units. A wide variety of schedule designations are specified for each size providing variation in wall thickness and therefore weight.
Chris brooks storage tanks inspection, maintenance and failure
API 653 tank inspections are important to identify problems and prevent tank failures. Inspections should be conducted by certified inspectors following proper protocols, including visual and ultrasound thickness testing and vacuum testing of floor seams. Tank maintenance includes regular visual inspections, keeping records, and conducting API-653 inspections every five years. Common causes of catastrophic tank failures include improper welding procedures resulting in a lack of weld fusion, not using certified welders, weld deterioration over time, overfilling tanks, and using contractors not qualified to API standards.
M&R Class
1) Tunnel rail damages on containers are often caused during vessel operations when containers are improperly seated on bomb carts. When found, the damaged container should be temporarily repaired at OOS1 within an hour to minimize trucker wait times.
2) Kinked corner posts are usually caused by incorrect stacking on vessels and result in the container needing flatbed delivery for safety. Bent corner castings may also require flatbed delivery.
3) Major damages that compromise a container's structural integrity, such as severed rail connections or large cuts in the sidewalls, render the container unsafe to transport.
Nb 23 2011 part 3 repairs
This document provides information about the National Board Inspection Code for 2011, including its various committees and subgroups that were involved in developing the code. It lists the members of these committees and subgroups, which include representatives from government regulatory agencies, insurance companies, manufacturers, and others. The document also provides contact information for the National Board headquarters and other facilities.
Piping sample report
1. A visual inspection was conducted on the gas gathering sub-header and header circuit at a well room in accordance with API-570 standards, identifying areas needing repair.
2. Significant coating failure and corrosion were found throughout the sub-headers, with wall loss up to 0.020 inches in some areas. U-bolts were also near failure due to corrosion.
3. Recommended repairs included removing corrosion from supports, installing single point contacts, replacing bolts, and cleaning and recoating piping to prevent further corrosion. Ultrasonic thickness readings were above minimums.
Asme viii Div. 1 presentation rev.0
This document provides an overview and introduction to ASME Section VIII Division 1, which establishes rules for the construction of pressure vessels. It discusses the historical context that led to the development of pressure vessel codes, an overview of ASME's codes and standards, key definitions, and the design requirements and considerations specified in Section VIII Division 1. The document covers topics such as material selection, corrosion allowances, minimum thickness requirements, design pressure, and loadings that must be considered in pressure vessel design.
vns iso tank transport
The document discusses different types of tank containers used to transport liquids, including ISO tank containers, special tank containers, and intermediate bulk containers (IBCs). It provides details on ISO tank specifications, components of ISO tanks, the market for tank containers, and the differences between standard ISO tanks and special tanks.
I Beam Standard Specifications _Details
This document provides specifications for rolled steel beams used in India according to Indian standards, including the designation, weight per meter, sectional area, depth of section, width of flange, and thickness of flange and web for various ISJB, ISLB, and ISMB beams. Dimensions and weights are given for over 50 different beam types.
Diseños
Este documento presenta el diseño de una grúa pluma con una capacidad máxima de carga de 12 toneladas para su uso en puertos deportivos. Incluye el análisis y cálculo estructural de todos los componentes de la grúa, como la pluma, la columna, la placa base y el sistema de elevación. También describe los detalles de fabricación e instalación necesarios para su construcción. El objetivo es proporcionar una solución para elevar y mover cargas pesadas de forma segura en este tipo de puertos.
Vertical vessel loading calculation
The document outlines the process for designing vertical vessel foundations, including determining the vessel type, design considerations, calculation criteria, and steps. The key steps are: (1) sketching the vessel and foundation, (2) determining equipment and load data, (3) calculating gravity, wind, and seismic loads, (4) checking soil bearing capacity, sliding, and overturning, (5) structurally designing the pedestal with vertical bars, horizontal ties, and top face bars, and (6) calculating anchor forces. The purpose is to ensure the foundation can safely support the vertical vessel according to Saudi Aramco standards.
Guide for the design of crane supporting steel structures
This document provides guidelines for the design of crane-supporting steel structures. It covers loads specific to these structures, design for repeated loads and fatigue, classification of structures, design and construction measures, and topics related to rehabilitation and upgrading of existing structures. The document contains several chapters that describe loads, fatigue design procedures, classification of crane service, examples of duty cycle analyses, design and construction checklists, and other topics such as clearances, attachments, and welding standards.
Catalog lobe pumps for ice cream freezer
This document provides specifications for improved pumps for continuous freezers used to produce ice cream. It includes models, RPMs, flow rates up to 3000 liters/hour, part numbers, weights, and installation instructions. The pumps are compatible replacements that are high quality and manufactured in various configurations.
Storage tank inspection presentation
The document discusses several water and waste water management solutions from James Fisher Tank Inspection including:
1) A lead discriminator that can identify and locate service pipes without excavation in 30 seconds to 3 minutes.
2) 3D SONAR technology that can map settlements in harbors, tanks, and storage facilities with a survey time of 45 minutes and a maximum range and depth of 40 meters and 200 meters respectively.
3) Techniques for in-situ stress measurement in concrete and steel reinforcement to test and monitor concrete structures.
Api 650 & 653 questions closed book with answers
This document contains 100 multiple choice practice questions related to API standards 650 and 653 for aboveground storage tanks. The questions cover topics such as welding procedures, inspections, repairs, alterations, testing and qualifications. Correct answers are provided for each question. The purpose of the document is to test knowledge of the requirements and recommendations in API 650 and 653 for ensuring the integrity and safety of aboveground storage tanks.
Api 575 rev.2
This document provides guidelines and recommendations for inspecting existing atmospheric and low-pressure storage tanks. It covers the scope and types of tanks, reasons for inspection, causes of deterioration, inspection frequency and methods. Key areas addressed include leak testing of tank bottoms, integrity of repairs and alterations, and maintaining inspection records. Definitions of important terms are also provided.
Forklift Fork Maintenance: Caliper Guide from Cascade Corporation
Use the Fork Inspection Kit developed by Cascade to promote safety in the workplace. One of the keys to safe lift truck operations begins with inspecting your forks for wear and damage. Follow the quick and easy steps outlined in the Fork Inspection Kit to ensure the safety of your facility and keep you in compliance with ANSI/ITSDF B56.1-2009.
50313261 calculos-orejas-de-izamiento
El ingeniero John Jurado realizó cálculos para determinar el espesor necesario de una oreja de izamiento y el tamaño de un filete para un proyecto llamado Casacará. Para la oreja, con una carga de 10000 libras aplicada a una distancia de 2 pulgadas y usando acero ASTM A-36, el espesor calculado fue de 3/8 pulgadas. Para el filete, con la misma carga, el tamaño calculado fue de 1/8 pulgadas.
3eslingas cable
Este documento proporciona información sobre el uso y selección de eslingas de cable de acero. Explica cómo determinar el diámetro del cable necesario basado en el peso a elevar y aplicando un factor de seguridad de 6. También describe los diferentes tipos de eslingas, recomendaciones para su uso, y cuándo una eslinga debe ser reemplazada debido al desgaste.
Engineering & Design of Pipe Supports
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
Padeye calculation example
This document provides design details and checks for a lifting shackle, sling, and padeye assembly. Key points include:
1. The sling and shackle are selected to have sufficient minimum breaking load capacity to safely lift the design load of 8417 kN, with safety factors applied according to standards.
2. The padeye dimensions are checked against criteria for the pin hole diameter, thickness, radii, and plate sizes. Stress checks are performed at critical locations like the pin hole.
3. Forces acting on the assembly are calculated based on the design load and orientation. Stresses are analyzed at points on the padeye to ensure values are below allowable limits.
INSPECTION OF PRESSURE VESSELS TO ASME Section VIII Div. 1.pdf
The document discusses a seminar presentation on inspection of pressure vessels according to ASME Section VIII Division 1. The presentation outline covers what is authorized inspection, an overview of ASME codes, code stamps, inspection responsibilities of manufacturers and authorized inspectors, the scope and organization of ASME Section VIII, and inspection requirements of Section VIII Division 1.
Peaking & Banding
Peaking and banding refer to the roundness and straightness of shell plates around vertical and horizontal joints in storage tanks. Peaking is measured using a horizontal sweep board along vertical joints, while banding is measured using a vertical sweep board along horizontal joints. Acceptance criteria per API standards allow for peaking deviations of up to 13 mm and banding deviations of up to 13 or 25 mm depending on the standard. Proper measurement procedures involve visually inspecting the tank, positioning the sweep board accurately, and taking measurements at a minimum of 8 locations around the tank circumference.
My Design Projects_2
The document contains several technical drawings of mechanical parts with dimensions. The drawings include views and details of parts like dust bins, doors, rollers, shafts, racks, shelves and covers. Dimensioning and tolerances are provided in inches and millimeters. The drawings appear to be for manufacturing various components of a mechanical assembly.
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - E0C
This document contains structural drawings for Alleyn's Lower School including:
1. Floor plans of the ground floor and first floor showing reinforced concrete walls, slabs, columns, and windposts.
2. A roof plan showing timber trusses, steel beams, and a prefabricated brick cornice.
3. Elevations and sections of staircases and structural details.
4. Schedules of structural columns, steel beams, timber rafters and general notes for contractors regarding dimensions and construction.
More Related Content
What's hot
Asme viii Div. 1 presentation rev.0
This document provides an overview and introduction to ASME Section VIII Division 1, which establishes rules for the construction of pressure vessels. It discusses the historical context that led to the development of pressure vessel codes, an overview of ASME's codes and standards, key definitions, and the design requirements and considerations specified in Section VIII Division 1. The document covers topics such as material selection, corrosion allowances, minimum thickness requirements, design pressure, and loadings that must be considered in pressure vessel design.
vns iso tank transport
The document discusses different types of tank containers used to transport liquids, including ISO tank containers, special tank containers, and intermediate bulk containers (IBCs). It provides details on ISO tank specifications, components of ISO tanks, the market for tank containers, and the differences between standard ISO tanks and special tanks.
I Beam Standard Specifications _Details
This document provides specifications for rolled steel beams used in India according to Indian standards, including the designation, weight per meter, sectional area, depth of section, width of flange, and thickness of flange and web for various ISJB, ISLB, and ISMB beams. Dimensions and weights are given for over 50 different beam types.
Diseños
Este documento presenta el diseño de una grúa pluma con una capacidad máxima de carga de 12 toneladas para su uso en puertos deportivos. Incluye el análisis y cálculo estructural de todos los componentes de la grúa, como la pluma, la columna, la placa base y el sistema de elevación. También describe los detalles de fabricación e instalación necesarios para su construcción. El objetivo es proporcionar una solución para elevar y mover cargas pesadas de forma segura en este tipo de puertos.
Vertical vessel loading calculation
The document outlines the process for designing vertical vessel foundations, including determining the vessel type, design considerations, calculation criteria, and steps. The key steps are: (1) sketching the vessel and foundation, (2) determining equipment and load data, (3) calculating gravity, wind, and seismic loads, (4) checking soil bearing capacity, sliding, and overturning, (5) structurally designing the pedestal with vertical bars, horizontal ties, and top face bars, and (6) calculating anchor forces. The purpose is to ensure the foundation can safely support the vertical vessel according to Saudi Aramco standards.
Guide for the design of crane supporting steel structures
This document provides guidelines for the design of crane-supporting steel structures. It covers loads specific to these structures, design for repeated loads and fatigue, classification of structures, design and construction measures, and topics related to rehabilitation and upgrading of existing structures. The document contains several chapters that describe loads, fatigue design procedures, classification of crane service, examples of duty cycle analyses, design and construction checklists, and other topics such as clearances, attachments, and welding standards.
Catalog lobe pumps for ice cream freezer
This document provides specifications for improved pumps for continuous freezers used to produce ice cream. It includes models, RPMs, flow rates up to 3000 liters/hour, part numbers, weights, and installation instructions. The pumps are compatible replacements that are high quality and manufactured in various configurations.
Storage tank inspection presentation
The document discusses several water and waste water management solutions from James Fisher Tank Inspection including:
1) A lead discriminator that can identify and locate service pipes without excavation in 30 seconds to 3 minutes.
2) 3D SONAR technology that can map settlements in harbors, tanks, and storage facilities with a survey time of 45 minutes and a maximum range and depth of 40 meters and 200 meters respectively.
3) Techniques for in-situ stress measurement in concrete and steel reinforcement to test and monitor concrete structures.
Api 650 & 653 questions closed book with answers
This document contains 100 multiple choice practice questions related to API standards 650 and 653 for aboveground storage tanks. The questions cover topics such as welding procedures, inspections, repairs, alterations, testing and qualifications. Correct answers are provided for each question. The purpose of the document is to test knowledge of the requirements and recommendations in API 650 and 653 for ensuring the integrity and safety of aboveground storage tanks.
Api 575 rev.2
This document provides guidelines and recommendations for inspecting existing atmospheric and low-pressure storage tanks. It covers the scope and types of tanks, reasons for inspection, causes of deterioration, inspection frequency and methods. Key areas addressed include leak testing of tank bottoms, integrity of repairs and alterations, and maintaining inspection records. Definitions of important terms are also provided.
Forklift Fork Maintenance: Caliper Guide from Cascade Corporation
Use the Fork Inspection Kit developed by Cascade to promote safety in the workplace. One of the keys to safe lift truck operations begins with inspecting your forks for wear and damage. Follow the quick and easy steps outlined in the Fork Inspection Kit to ensure the safety of your facility and keep you in compliance with ANSI/ITSDF B56.1-2009.
50313261 calculos-orejas-de-izamiento
El ingeniero John Jurado realizó cálculos para determinar el espesor necesario de una oreja de izamiento y el tamaño de un filete para un proyecto llamado Casacará. Para la oreja, con una carga de 10000 libras aplicada a una distancia de 2 pulgadas y usando acero ASTM A-36, el espesor calculado fue de 3/8 pulgadas. Para el filete, con la misma carga, el tamaño calculado fue de 1/8 pulgadas.
3eslingas cable
Este documento proporciona información sobre el uso y selección de eslingas de cable de acero. Explica cómo determinar el diámetro del cable necesario basado en el peso a elevar y aplicando un factor de seguridad de 6. También describe los diferentes tipos de eslingas, recomendaciones para su uso, y cuándo una eslinga debe ser reemplazada debido al desgaste.
Engineering & Design of Pipe Supports
This presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P.
Padeye calculation example
This document provides design details and checks for a lifting shackle, sling, and padeye assembly. Key points include:
1. The sling and shackle are selected to have sufficient minimum breaking load capacity to safely lift the design load of 8417 kN, with safety factors applied according to standards.
2. The padeye dimensions are checked against criteria for the pin hole diameter, thickness, radii, and plate sizes. Stress checks are performed at critical locations like the pin hole.
3. Forces acting on the assembly are calculated based on the design load and orientation. Stresses are analyzed at points on the padeye to ensure values are below allowable limits.
INSPECTION OF PRESSURE VESSELS TO ASME Section VIII Div. 1.pdf
The document discusses a seminar presentation on inspection of pressure vessels according to ASME Section VIII Division 1. The presentation outline covers what is authorized inspection, an overview of ASME codes, code stamps, inspection responsibilities of manufacturers and authorized inspectors, the scope and organization of ASME Section VIII, and inspection requirements of Section VIII Division 1.
Peaking & Banding
Peaking and banding refer to the roundness and straightness of shell plates around vertical and horizontal joints in storage tanks. Peaking is measured using a horizontal sweep board along vertical joints, while banding is measured using a vertical sweep board along horizontal joints. Acceptance criteria per API standards allow for peaking deviations of up to 13 mm and banding deviations of up to 13 or 25 mm depending on the standard. Proper measurement procedures involve visually inspecting the tank, positioning the sweep board accurately, and taking measurements at a minimum of 8 locations around the tank circumference.
What's hot (20)
Guide for the design of crane supporting steel structures
Guide for the design of crane supporting steel structures
Forklift Fork Maintenance: Caliper Guide from Cascade Corporation
Forklift Fork Maintenance: Caliper Guide from Cascade Corporation
INSPECTION OF PRESSURE VESSELS TO ASME Section VIII Div. 1.pdf
INSPECTION OF PRESSURE VESSELS TO ASME Section VIII Div. 1.pdf
Similar to D-005 Iso Container Frame
My Design Projects_2
The document contains several technical drawings of mechanical parts with dimensions. The drawings include views and details of parts like dust bins, doors, rollers, shafts, racks, shelves and covers. Dimensioning and tolerances are provided in inches and millimeters. The drawings appear to be for manufacturing various components of a mechanical assembly.
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - E0C
This document contains structural drawings for Alleyn's Lower School including:
1. Floor plans of the ground floor and first floor showing reinforced concrete walls, slabs, columns, and windposts.
2. A roof plan showing timber trusses, steel beams, and a prefabricated brick cornice.
3. Elevations and sections of staircases and structural details.
4. Schedules of structural columns, steel beams, timber rafters and general notes for contractors regarding dimensions and construction.
181015 muna-fichas nebulizada-email
This document provides specifications for metal pipe clamps and accessories made by BIS. It includes details on materials, coatings, certifications, applications, and specifications for different clamp and accessory sizes. Performance characteristics include corrosion resistance up to 1000 hours in salt spray testing, noise insulation according to DIN 4109, and fire safety certification starting at M10 sizes. Technical data and specifications are provided for each product, including dimensions, material, load ratings, and other details.
MAIN CANOPY BAJAJ HR(22.09.2016)
This document provides structural calculations for the main canopy of a building located in Mumbai. It includes STAAD analysis of the steel structure, material properties, load assumptions, and results of the analysis. Key sections analyzed include the outer MS frame, inner MS frame, supporting MS pipes and tubes. Loads considered are self-weight, wind load, and live load. The analysis checks the steel structure for deflection under these loads.
Building technology 1 Project 1 Drawing compilation
Industrialised building system
by Ong Min Junn, Ong Jia Hui, Sonia Mancxia, Tan Wen Hao, Ryan Kerry Jee, Izzat Jafri
3. Hansons lodge.pdf
The document contains plans and specifications for renovations to Hanson's Lodge, including:
- A site plan showing the layout of the proposed residence, carport, and other site features.
- Floor plans, elevations, and sections detailing the framing, finishes, and fixtures of the building.
- Schedules specifying windows, doors, framing sizes and materials to be used.
- Engineering details for concrete footings and structural requirements.
- Notes indicating all work must comply with the relevant building codes and standards.
Angle Head Drawing-3-23-16
This document contains engineering drawings for the design of a right angle head for a milling machine. It includes detailed drawings showing the exploded view of the assembly, individual part drawings with tolerances and notes, a parts list with materials, vendors and quantities. Dimensioned section views and tolerance information are provided to fully specify the geometry of the components.
Siemens Sitrans F VA 250
Due to its full metal design, the SITRANS FVA250 variable area meter with a standard length of 250 mm (9.84 inch) can be used to measure many different types of liquids and gases passing through closed piping. The robust design means that it can also be used in harsh conditions. The various types of flange connec- tions, linings and float materials satisfy the requirements of the pharmaceutical and chemical industries.
The measured value is displayed directly on the scale with the standard version. For process monitoring and control, the device can be equipped with a transmitter (MEM) as well as limit switches.
Jawanza Bassue Design Portfolio
This document is Jawanza Bassue's design portfolio from summer 2016. It contains 22 pages showcasing various engineering design projects including parts for wind turbines, a heat sink, engine mounts, and aircraft components. The portfolio includes 3D models, technical drawings, descriptions, and analyses of each project. It also contains sketches, web designs, and information about Bassue's education and work experience in aerospace engineering.
Ct mt 00000005mag_combibox
This document provides information on CombiBox electromagnetic clutch-brake modules. It includes:
- Program schedules and technical data for CombiBox types 10, 09, and 06 which differ in clutch and brake configurations.
- Dimensional drawings and specifications for CombiBox units with various shaft in/shaft out, bore in/bore out, and bore in/shaft out configurations.
- Ordering information examples and details on flange dimensions, torque ratings, and voltage requirements.
Customization and modular options are available to adapt CombiBoxes to specific construction and electrical needs.
1
This document summarizes the design of a concrete beam (B65) using ETABS 2016 and ACI 318-08 code. It provides the beam details, material properties, design code parameters, and results of the flexural, shear, and torsion design including required reinforcement. The beam is 348cm long with a cross section of 25cm x 40cm. The flexural design requires a minimum of 32mm2 of reinforcement on the bottom and top. For shear and torsion, the design shear capacity is exceeded requiring additional shear reinforcement of #45 bars spaced at 4.17cm.
Drawings of Revit project for D type qtr.
The document contains construction plans and details for proposed Type D and Type C housing blocks and an officers' club building at Orient Area. It includes layout plans, section details, foundation details, beam and roof details, and reinforcement details. Dimensions and specifications are provided for structural elements including walls, columns, beams, slabs, and staircases.
LDavis_work_examples
This document contains work examples and specifications for manufacturing turbine blades and related components out of nickel alloys like Inconel. It includes summaries of 4 product launches for OEM manufacturing of turbine blades and compressor discs and 1 for component repair. It also provides details on the materials, number of operations, and specifications for components like dimensions, tolerances and surface finishes. Engineering drawings with additional details are referenced.
Istana Bandar Jugrah Sections
This document contains architectural plans and sections of a building with multiple floors. The plans show floor layouts including rooms, corridors, balconies, courtyards and other features. Dimensions are provided for floor levels, ceiling heights, and total building height. Sections cut through the building show details of floor configurations and relative room positions.
SCWR ISO6432 - Cilindro Mini ISO CKD.PDF
Cilindro Pneumático ISO ISO6432 - CKD CORPORATION
Intercambiável:
Em conformidade com o padrão ISO6432,
fácil de usar e em conformidade com a intercambialidade.
Opção em Aço INOX:
Adequado para muitos ambientes e aplicações diferentes.
O design metálico prateado brilhante proporciona uma aparência elegante.
Sensores padrão CKD aplicável:
Opção com diferentes sensores, em diferentes posições
φ8~φ16 - Equipado com suporte de sensor e junta de bloqueio
φ20、25 - O sensor é encaixado diretamente no suporte
apresentando contato de três lados, sem rotação,
seguro, confiável e facilmente ajustável
Assem2_FINAL.PDF
The document contains engineering drawings and specifications for 14 metal parts with part numbers LB001 through LB014. It includes dimensions, materials, quantities and supplier information for a metal fabrication project for Lalitha Metal Fabricators. Engineering drawings show views and dimensions for the individual parts and their assembly.
ICS 5000 UK version
Brochure from Schiedel. This forms part of our flue and chimney range and can be used with acknowledgement to Schiedel Chimney Systems Ltd. as well as a link to the original source at www.schiedel.com/uk
Schiedel's chimney flue range includes flue systems for residential and commercial applications. A typical flue installation includes steel chimney pipe or mineral pipe or module components from the heat source appliance (a stove, biomass or gas appliance for example) to it's termination point above the roof. Support is required for internal and external chimney systems.
Schiedel specialise in wood burning appliances and flues, which are a renewable way of avoiding constant gas or electricity usage when looking at a secondary heat source. Even heat pumps are problematic with severe temperature drops, so a secondary source is always needed.
Unki Warehouse Portal Frame Design - Prokon Design Sheets REV01
This document summarizes the section sizes, material properties, boundary conditions, and loading for a portal frame structure. It includes tables showing the section designation, dimensions, properties, and material of various structural members. It also describes the fixed and pinned supports at nodes, as well as the dead and live loads on the roof and walls. Finally, it lists the load combinations to be analyzed for the ultimate and serviceability limit states.
Ck21 presentation team 3
This document contains information for the 46 Westgate building project including:
- Site information and adjacent plots
- Building plans from basement to roof level showing room layouts and dimensions
- Structural design details such as foundations, retaining walls, steel columns and beams
- Notes from a CK21 meeting and details on using mega-nodes for construction
- The planned construction process from foundations to secondary structure
- Tasks for the following week including MEP modeling and clash removal
Craig & Derricott Switch Disconnectors Catalogue
This document provides information on switch disconnectors, fuse combination switches, and changeover switches from Craig & Derricott. It includes details on their i-switch range which combines modern styling with cost-effective design. The i-switch range includes IP41 and IP65 sealed enclosures in moulded plastic, deep drawn steel, and stainless steel. It provides electrical and mechanical specifications for isolator interiors rated from 20A to 80A.
Similar to D-005 Iso Container Frame (20)
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - E0C
SAMPLE REVIT DRAWINGS-SUNIT K DHINGRA-COMPLETE - E0C
Building technology 1 Project 1 Drawing compilation
Building technology 1 Project 1 Drawing compilation
Unki Warehouse Portal Frame Design - Prokon Design Sheets REV01
Unki Warehouse Portal Frame Design - Prokon Design Sheets REV01
D-005 Iso Container Frame
- 1. Corner Piece SCALE 1 / 10 1 1 2 2 3 3 4 4 5 5 6 6 A A B B C C D D DESIGNED BY CHECKED BY W.Z. DWG NO SIZE SCALE FABRICATION DRAWINGS QTY. SIZE INCHES REF. NO. 20' ISO Frame, UN Portable Tank 15,000 L (ASME VIII Div 1) xxxxx xxxxxx OCEANIC ENGINEERING W.L.L. CLIENT CONTRACTOR DESIGNER ISO CONTAINER DETAIL DRAWING AS SHOWN AS SHOWN 1 its 0001 D-005 A3 ALL DIMENSIONS ARE IN MM UNLESS NOTED OTHERWISE NIZAM ISO 4016 - 60 X 60 X 3 - 2340 (TYP. 4) CASTED TOP LEFT CORNER (TYP. 2) REINFORCING WEB (TYP.8) 12 348 303 45.0 CASTER BOTTOM LEFT CORNER (TYP. 2) ISO 4019 - 60 X 60 X 3 - 2110 (TYP. 4) ISO 4019 - 60 X 60 X 3 - 5740 (TYP. 4) ISO 657-1-L40 X 40 X 4 X 2305 (TYP.6) ISO 4019 120 X 60 X 3 5740 (TYP. 2) ISO 4019 - 100 X 50 X 3 - 5950 (TYP. 2) STEEL PLATE 20 MM THICKNESS ISO 657-1- L 40 X 40 X4 2365MM 1" PIPE 420 MM 420 2440 2590 950 812641 731 6100 180 145 125 180 125 GENERAL NOTE: 1- Steel section dim. & length based on the corner piece dim. in case of the dimeneion various in the corner piece the steel sections should be revised accordingly 420 ISO 657 L40X40X4 420 MM 440 2305 ISO 657 L40X40X4 2305 MM ( TYP.6) 1143 2110 5740 5950 2340 2110 5740.00 1040 80 91 53 R7 348 53 295 98 R7 45