This document is a curriculum vitae for Ghulam Shabbir that outlines his professional qualifications and experience in health, safety, and environment management. It details his academic and technical qualifications including degrees in law and arts as well as certifications in health, safety, and fire safety management. The CV describes over 18 years of experience in mechanical engineering and 10 years of experience in health, safety, and environmental management roles. It provides an overview of Ghulam Shabbir's responsibilities, projects, and areas of expertise in ensuring compliance with health, safety, and fire safety standards.
I. SCOPE
II. DEFINITION
III. FIRE EMERGENCIES - GENERAL
1. On discovering a fire:
2. On hearing the alarm:
3. If trapped in an office/ room:
4. If caught in smoke:
5. If forced to advance through flames:
IV. GENERAL SPILL RESPONSE PROCEDURES
1. ASSESS THE RISK
2. PROTECT PERSONAL
3. CONFINE THE SPILL
4. CONTAIN THE LEAK/ RELEASE AT THE SOURCE
5. CLEAN UP/ REINSTATEMENT OF THE SITE.
6. SPILL FROM FUEL TANKS:
7. SPILL OR RELEASE FROM SMALL SIZE CONTAINERS
8. Chemical and Solvent Spills:
9. Toxic Fumes
V. MEDICAL EMERGENCY
ANY PERSON WITNESSING A MEDICAL EMERGENCY
Response to Medical Emergency
First Aid Tips:
1. Bleeding
2. Burns, Chemical and Thermal.
3. Chocking
4. Fainting and Shock
5. Fractures and Sprains
6. Poisoning and Overdose
7. Seizure
8. Shock
9. Unconscious/ Unresponsive
VI. ORGANIZATION CHART OF RESPONSE TEAM
VII. ROLES AND RESPONSIBILITIES
VIII. EMERGENCY ESCAPE ROUTE AND ASSEMBLY POINT
I. SCOPE
II. DEFINITION
III. FIRE EMERGENCIES - GENERAL
1. On discovering a fire:
2. On hearing the alarm:
3. If trapped in an office/ room:
4. If caught in smoke:
5. If forced to advance through flames:
IV. GENERAL SPILL RESPONSE PROCEDURES
1. ASSESS THE RISK
2. PROTECT PERSONAL
3. CONFINE THE SPILL
4. CONTAIN THE LEAK/ RELEASE AT THE SOURCE
5. CLEAN UP/ REINSTATEMENT OF THE SITE.
6. SPILL FROM FUEL TANKS:
7. SPILL OR RELEASE FROM SMALL SIZE CONTAINERS
8. Chemical and Solvent Spills:
9. Toxic Fumes
V. MEDICAL EMERGENCY
ANY PERSON WITNESSING A MEDICAL EMERGENCY
Response to Medical Emergency
First Aid Tips:
1. Bleeding
2. Burns, Chemical and Thermal.
3. Chocking
4. Fainting and Shock
5. Fractures and Sprains
6. Poisoning and Overdose
7. Seizure
8. Shock
9. Unconscious/ Unresponsive
VI. ORGANIZATION CHART OF RESPONSE TEAM
VII. ROLES AND RESPONSIBILITIES
VIII. EMERGENCY ESCAPE ROUTE AND ASSEMBLY POINT
HSE professional with twelve years plus experience in the construction/manufacturing industry – buildings, infrastructure, pre-cast concrete and fabrication of heavy steel structures/equipment in oil/gas sector with basic qualifications in Electrical engineering and additional qualifications in health safety and environment. Highly pro-active and articulate in communication and possessing excellent leadership, management and persuasive skills to bring about changes in the work culture particularly on health, safety and environmental issues.
More than 17 years of professional experience in the implementation & monitoring of Health, Safety and Environment management system and procedures as per OHSAS18001 and ISO 14001requirements. J3.Project Reliance Refinery Jamnagar (Gujarat) Pipe rack, LIN & LOX Tank. S.S Spool , U.G Pipe line. DIL 2X300 MW Power Project Chandrapur (Chimeney 275 m height , cooling tower, T.G, Boiler etc). AL Munnera, AL Raha project Abudhabi , UAE (Construction of Multistoried buildings, Circular Residential Towers, Town houses & Villas). DUBAL, DX. Technology Development Project (Bus bar, Pot line) Dubai (UAE). Emirates Aluminum smelter complex Project, (Cast House) Abudhabi. DUBAI FESTIVAL CITY (High rise Building, Shopping Mall, tunnel, Culvert etc.). BPCL Refinery India CRUDE DISTILLATION & VACUUM DISTILLATION UNIT HEAT EXCHANGER, SRU, LPG & FIRE WATER VALVE SYST.Lafarge cement Plant. Fabrication, Erection & Maintenance of all TATA STEEL PLANTS, i.e. G.C.P, Gas holder, Hot strip mill, Cold rolling Mill wire and Rod mill & Power Plant. Power plant Maintenance work.
Safe Day Sir,
I introduce myself as a self motivated, hardworking individual having 6 years experience in the field of Health, Safety & Environmental with standard of ISO 9001 ISO 14001 and OSHAS 18001.
Review of my credentials will confirm that I have served as a catalyst for Occupational Health and Safety in the Petro chemical and construction industry, with complete accountability complemented by over 5 years of experience.
Recently I was associated with SAMSUNG ENGINEERING (EPC) (With knowledge of EHSMS) as HSE/Safety supervisor My goal is to transit my enthusiasm, creativity & experience into a position, where I continue to provide the strategic/ tactical leadership critical to retaining valued customers of an organization.
I am certain that my presence in your team will prove to be beneficial to your organization. As such, I would welcome an opportunity to speak with you to evaluate your needs & share my ideas.
My detailed resume is enclosed for your kind reference.
Hopefully the detail in my CV, glimpse of my personal and professional background will serve as the foundation to a longer standing relationship.
I appreciate your consideration and look forward to hearing from you.
ABID MAHMOOD
HSE/ Engineer-Officer
+971552587710
+971504213588
1. Page 1 of 4
CURRICULUM VITAE
Name: Ghulam Shabbir Father: Noor Muhammad
Date of Birth: 5 April 1969 CNIC NO: 42000-0461590-1
Contact No: 03002554928 E-Mail: gshabbirus_4u@yahoo.com
Postal Address: House No. R.507 Sector 8.C Gulshan –E–Zahoor Abye Sinea Line Karachi 74400
PROFESSIONAL OBJECTIVE:
To Obtain a Career-Oriented Position That Offers the Development Opportunity in “Health Safety & Environment” of
an Organization.
QUALIFICATION (ACADEMIC):
LLB
BA
SSC Science
QUALIFICATION (TECHNICAL):
4 years DAE (Mechanical)
Boiler Engineer class III from Lahore Board of engineers Government of Punjab
PROFESSIONAL COURSES:
Diploma in Health Safety and Environment Management System (S.D.C Government of Pakistan). GOLD
MEDALIST
Fire Fighting and Damage Control Course NBCD (PN Engineering School Karsaz).
Safety Officer Course from Skill Development Council of Pakistan.
Certification for attending workshop on waste management system workshop (Managed by engineering institute of
Pakistan and NED University).
First Aid & Rescue Operation Course.
ISO 9001: 2015(QMS) awareness course from INTERTEK Pakistan.
IOSH UK certification.
Fire Fighting Level II UK Certification.
OHSAS 18001 LEAD AUDITOR from ESNEK (under authority IRCA UK Ref NO: A17555).
First Aid Level II UK Certification.
OSHA 30 Hrs USA Certification.
Scaffolding Supervisor Course (P&T Institute).
Industrial Fire Prevention Course (P&T Institute).
Chemical Stocking & Stacking Safety Course (PHMA).
Permit To Work Safety Procedure Course (P&T Institute).
Behavior Based Safety Course (P&T Institute).
Lifting Operation and Heavy Equipment Safety (P&T Institute).
Career Counseling Course (P&T Institute).
Construction Safety Course (P&T Institute).
Fire and Safety Risk Assessment Course (P&T Institute).
Confined Space Entry Safety Course (P&T Institute).
Small Vessel Charge & Box up Safety Certification Course (P.N Engineering Board).
Work At Height Safety Course (P&T Institute).
Communication and Leadership Course (Safecon).
Communication and Leadership Course (P&T Institute).
ISO OHSAS 18001 Documentation and ISO 14001 Documentation Course (PHMA).
Fir engineering course (Nationwide association of passive fire installers and specifies UK).
Basic Sectional Training Course (Government of Sind Civil Defence).
2. Page 2 of 4
IN HOUSE TRAININGS:
Safe Entry in Confined Spaces and Safe Work Operation Training.
Fire Prevention & House Keeping Importance Training.
Fire Tender Safe Operation Training.
Fire Fighting Techniques and Approaches Safety Training.
Rigging & Lifting Safety Training.
Advance Fire and Safety Auditing Training.
Environmental Protection Techniques Training.
Incident Investigation & Root Cause Analysis.
Work At Heights Safe Operation Training.
Ladder & Scaffolding Safety Training.
Excavation & Trenches Safety Training.
HSE Management System Audit & Follow Up.
Waste Management Planning & Implementation Training.
Machinery Guarding & Interlocking (Lock Out & Tag Out) Training.
Permit to work types and protocol.
Incident reporting and investigation.
Driving and vehicle safety.
Oil spillage and control response Mock Drill training.
Earth quake and bomb Threat emergency response training.
Incident control and command and emergency response team training.
Fire fighting awareness and hot work safety procedure training.
PROFESSIONAL EXPERIENCE SUMMARY:
Having more than 18 years of proven track record practical experience in Mechanical Engineering, Furthermore, 10
years on going experience in the field of Health, Safety & Environmental Management System with different
Scenario, which includes the experience to operate and maintain the following portable and fix Fire Fighting
Equipment.
Portable stored pressure fire extinguishers ( Water, Foam, CO2 and Dry Chemical Powder)
CO2/ AFFF and Dry Chemical Powder Fire extinguisher Trolley mounted.
Self Contained Compressed Air Breathing Apparatus (SCCABA).
Fire Fighting and Damage Control Diesel Engine driven Portable Pumps.
Main Fire Fighting Pump Electric Driven 500GPM to 750GPM.
Fixed Foam (AFFF) Fire Fighting System (Foam Generation and Monitor).
Fixed CO2 suppression System.
Fixed Fire Extinguishing System. (Fire hydrants, fire hose reels, water sprinkler system).
Fixed FM 200 Clean Agent Gas Suppression System for confined spaces (Data Base, LT Rooms, store of chemicals,
lubricants and paints etc.
Installation & Repair of Fire Water Lines and Fire Hydrants and Fire Hose Reels etc.
WORK EXPERIENCE WITH DIFFERENT ORGANIZATIONS:
1. Safety and Fire Fighting as well as Project officer for 06 years in Betas Trade International (fabrication, reverse
engineering and re- engineering firm) Karachi. (Up to 2009AD) Firm has been engaged to work with Karachi
Shipyard and different Organizations.
2. Worked with Al-Mumtaz Traders having head office at Gujranwala. I was deputed at Sarah Corporation Karachi as
project officer on site for technical staff, HSE and fire fighting officer. (Dismantling of dying and printing machinery)
(Up to December 2011).
3. Fire & Safety Officer for 02 years MGF engineering Services and did liaison with different factories / organizations
(Up to 2013).
4. In Charge HSE Department at Mustaqim Dyeing & Printing Industries (Pvt.) Ltd. as well as MDPI Group HSE
(Continue till to date since 1st
April 2014)
3. Page 3 of 4
JOB RESPONSIBILITIES:
Inspection & Audit of Fire & Safety Equipment and Fire Pumps (Pump room), (Through HSE Staff).
Inspection on Site as well as Signing & authorizing work permits on site for all spark potential activities.
Inspection of fire hydrants, fire hose reels, fire water monitors & rescue items.
Attending daily, weekly, monthly & quarterly meetings with all Senior Management.
Fire risk Assessment & report writing.
Incidents Investigation and report writing, with submission of recommendations and suggestions to management for
improving the health and safety of persons and property as well as to take measure with prior consent of the
management to create healthy clean and tidy environment at work places and to protect atmosphere and to make the
waste management plan.
Ensuring Safe Storage, handling and transportation of chemical and Inspection of critical work and other work
places.
Conducting Drills (Fire Fighting Mock Drills, Oil Spill Drills, First Aid and Rescue of injured person drills time to
time educating the employees.
Planning and preparing with concern HODs Emergency Response Team to response in case of actual fire occurs.
Preparing and Posting Evacuations Plan with marking of passage, exit routes and assembly points.
Ensuring safe working during all critical events for example work at height and work in the confined space at all
levels.
Ensuring & Encouraging use of PPEs by all employees.
Target risk assessment of different departments, actions and process to avoid accidents, incidents and near miss and
to record all proceedings in the course of T.R assessment and fair and impartial reporting to the management.
Writing / editing / review Different SOPs to ensure safe working system.
Review company safety policy and recommending necessary changes to management if necessary.
To attend safety operation committee meetings and to render suggestion / recommendation for safe working system.
PREPARING TRAINING MATERIAL & DELIVERING LECTURES ON FOLLOWING TOPICS:
a Fire fighting theory & practical training. p Water sprinkling system.
b First aid & rescue training. m CO2 / FM 200 suppression system.
c Maintenance of fixed fire fighting system. n Fire tender operations.
d Breathing apparatus maintenance. o On site construction safety training.
e Confined space safe entry. p Fire detection and fire protection system.
f Permit to work. q Near miss incident, accident reporting.
g Work place safety. r Incident command & control system.
h Behavior based safety. s Onsite training of PPEs.
i Lifting & rigging safety. t Onsite training on fire pumps operation.
j Chemical storage & safe handling. u Emergency response team mock drills.
k Refilling of fire extinguishers. v Duties & responsibilities of ERT.
l AFFF fire fighting system. w Rehearsalof emergency evacuation.
m Function of different fire extinguishers. x Protocol for flammable chemicals.
n Steam drenching / suppression system. y Protocol for work at height.
o All types of firefighting equipments. z Lockout & Tag out system.
COMPLIANCE RESPONSIBILITIES:
1. To accompany different auditors while conducting factory audit.
2. To attend Pre audit meetings with auditors and compliance department.
3. To address different HSE related issues by liaison and follow up with different departments.
4. To ensure compliance HSE Department on basis of zero tolerance as required by Walmart standard.
5. To ensure compliance as per IWAY Standard of IKEA. (Chapter 8 of (I WAY & I MUST).
6. To coordinate with management and compliance department to complete different tasks assigned by different
auditors.
7. To ensure fire and safety equipments inspection as well as audit Walmart latest fire safety training.
4. Page 4 of 4
RECENT NEW PROJECTS DESIGNED AND EXECUTED:
1. DCP, Foam type and Water type fire extinguishers In-house Refilling System.
2. CO2 Suppression / Flooding System for Electrical LT Room.
3. Designed new attachment for fire tender to overcome time delay while feeding through water tankers.
4. Gas line and fire water line drawings with isolation valves and made available at all main gates of factory.
5. Kill cards showing grid marking, exit and emergency exit routes, hazard identification, Gas and fire water line
isolation valves, electric DBs and main breakers.
6. Edited different SOPs especially about Fire Fighting System & HSE Management System.
7. Managed training literature for different topics of trainings.
8. Completed fire windows project.
PROFESSIONAL MEMBERSHIP:
FPAP (Regular member of fire Protection Association of Pakistan).
COMPUTER:
Well familiar with windows XP (MS office & Internet).
LANGUAGES:
Urdu, Punjabi and English (Fully Conversant).
I always prefer to share my knowledge, experience and believe in that learning never
ends.
REFERENCE:
Will be provided if required.