This document contains the curriculum vitae of Ramy Khalifa Engab, a Libyan national born in 1990. It outlines his educational background including a diploma in corrosion inspection from 2007 and a B.S. in petroleum engineering from 2011. It also details his work experience including over 5 years as a plant inspector conducting inspections and non-destructive testing at oil refineries in Libya. His responsibilities included inspection and testing of equipment according to international standards and participating in maintenance and turnaround projects.

1. Full Name : Ramy Khalifa Engab
Date & Place of Birth : 22101990 , Tripoli - Libya
Marital State : Single
Nationality : Libyan
Address : Tripoli / Libya
Passport No : 287691
Mobil No. : 00218-914429956
E-mail : ramy.engab@yahoo.com
Linkedin Account ID : Ramy Enagb
EDUCATIONS & QUALIFICATIONS:
 Diploma in Corrosion Basics and Inspection of the Petroleum Industry
Specific Training Centre / Azzawiya-Libya -2007.
 B.S in petroleum engineering. Ben-Rushed University Tripoli/Libya in 2011
EMPLOYMENT AND WORK EXPERIENCE:
One year (since 11/03/2008 to 15/03/2009) Practical experience as Junior Plant
Inspector in petrochemical industry (RASCO) in Inspection & Corrosion Engineering
Division.
Over Four years (since 15/03/2009) Practical experience as Plant Inspector & in
refining industry (LERCO) in Inspection & Corrosion Engineering Unit.

RESPONSIBLITIES & DUTIES:
From 11/03/2008to 15/03/2009 as a Junior Plant Inspector:
 Inspection of pressure vessels : towers , columns & drums according to
ASME standards.
 Inspection of all types of heat exchangers ( heaters, coolers, condensers ,
plate heat exchangers according to ASME standards.
 Inspection of Heaters& furnaces according to API standards.
 Inspection of atmospheric and pressurized tanks (fixed roof and floating)
(water tanks, fuel oil tanks, acid tanks, crude tanks, kerosene tanks and
LPG tanks according to API 620 ,620 & 653 .
 Inspection of pipe lines and their supports.
 Inspection of all types of valves ( welded, flanged, gate , globe)
 Perform cold pressure testing of safety valves.
 Perform hydrostatic test on the pressurized equipment (pipe lines, vessels,
drums, boilers, desalination unit, heat exchangers) in accordance to codes.
CURRICULUM VITAE

2. 2
From 11/03/2009up to presentdate as a Plant Inspector& NDT
Technician:
 Ultrasonic thickness measurement of heavy wall pipe works, drums , tanks and
pressure vessels according to EN-1712/13/14 standard by using the following device
:- * DM-4E.
 Dye penetrant testing on welding joints and machinery parts by spraying according to
EN-571-1 standard.
 Magnetic particle testing using permanent magnetic yoke and AC magnetic yoke wet
continuous technique and dry powder for hot temp. equipment on welding joints and
various equipment.) according to EN-1290 standard .
 Perform the shop & the in-service inspection under the QA (quality
assurance) and ISO 2000 & 9001 (as a plant inspector).
 Inspection of pressure vessels : towers , columns & drums according to
ASME standards.
 Inspection of all types of heat exchangers ( heaters, coolers, condensers ,
plate heat exchangers according to ASME standards.
 Inspection of Heaters& furnaces according to API standards.
 Inspection of atmospheric and pressurized tanks (fixed roof and floating)
(water tanks, fuel oil tanks, acid tanks, crude tanks, kerosene tanks and
LPG tanks according to API 620 ,620 & 653 .
 Inspection of pipe lines and their supports.
 Inspection of all types of valves ( welded, flanged, gate , globe)
 Perform cold pressure testing of safety valves.
 Perform hydrostatic test on the pressurized equipment (pipe lines, vessels,
drums, boilers, desalination unit, heat exchangers) in accordance to codes.
 Issuing welding procedures , performing welders examinations & following
all welding activities at site .
 Issuing painting procedures , following up all painting activities at site ,
perform all related examinations such as surface profile test, wet & dry film
thickness check , holidays test , adhesive test.
 Monitoring heater’s tube condition using infra- red camera.
 Been participated in several Fabrication & Maintenance projects performed
by several contractors for LERCO as a follow-up site inspector & a member
of the project committee for the technical department including the
following activities:-
1- Preparing a full and detailed scope of work of the project and the repairing
activities to be carried out based on the recommendations as per inspection
report.
2- Participating within the project department with in the reviewing of the
contractors bids for the project in order to select the proper contractor for
the project ( this including reviewing contractor’s proposals , scope of
work offered by contractor, site visits for the contractors camp , & site
inspection for the contractors facilities )
3- Approving all contractor’s technicians whom are going to participate in
maintenance activities ex: Welders, Painters, Grit plasters etc.… and
carrying any required approving tests for the technicians ex welding,
painting tests.

3. 3
4- Following all the activities to be carried out and accepting all repairing
procedures after passing the required Inspection tests carried by me or the
contractor’s inspector Ex :- (Mobilization , scaffolding , cleaning , civil &
foundation works , welding , grit pasting, painting, demobilization).
5- Documenting all the work activity and helping the planning department
along with the contractor in editing the Final Activity Report.
6- Issuing The Final Acceptance Certificate for the project and the repairing
activities been done.
 ATTENDED PROJECTS :-
PROJECT DESECRIPTION
2100-RFT-1 fuel oil Tank
Re-bottoming the whole bottom
plates/Foundation works
2100-KT-11 &12 kerosene
tanks
Re-bottoming the whole bottom
plates/Foundation works / annual ring patch
plates and complete repainting
24” Kero- shipping line
Fabricating new modification for the shipping
line in total length 700 m
Firefighting system
Dismantle , installing Modifications (Flanges) ,
repairing, comp-repainting for 6’’ 8” 2”
firefighting rings (pipes) of all tank farm in total
of 21 tanks
2100-ST-1&2 slop tanks
Repairing tank roof & annual ring and complete
repainting
ATTENDED TURN AROUND ACTIVITIES :
PLANT TURN AROUND DATE
Ethylene
2010
Refinery
2008 , 2010 & 2012
Zawiya oil Refinery 2010
 Updated ‫ــ‬ 02/8/2016 ‫ــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــــ‬
Languages - Arabic as Mother Tongue
- PET Qualifications English for Speakers of Other Languages
References Available upon request