The applicant, Md Saddam Hussain, is applying for the position of Mechanical Engineer/Mechanical Supervisor. He has over 3 years of experience in mechanical maintenance and has worked on preventative and corrective maintenance of equipment like centrifugal pumps, plate and frame heat exchangers, and shell and tube heat exchangers. He has also worked on projects involving chemical cleaning, hydrotesting, and commissioning of pipelines. He highlights his technical skills in areas like autoCAD, Pro-E, ANSYS, and maintenance procedures.

1. COVER LETTER
To,
H R Department,
Sub: Application for the post of Mechanical Engineer /Mechanical Supervisor
Dear Sir/Madam,
I would like to take this opportunity to introduce myself and express my interest in being a part of
your esteemed organization.
Being a dedicated, self-motivated and sincere individual, I look forwards to being a part of an
organization that will give me an excellent working environment and a great potential for
developing professionally as well as personally.
With this in mind, I have attached a brief outline of my educational and professional history for y
our review. Should you find my profile of interest I would be more then eager to meet with you
to discuss any opportunity you may have within your organization.
I am awaiting a favorable response.
Yours sincerely,
Md Saddam Hussain

2. Md Saddam Hussain
B.TECH (Mechanical) Gewal Bigha near Maulana
Masjid.
25, Male Dist-Gaya, State-Bihar-823001.
Indian
Phone: 0571968352, 08019878128
tabishmd847@gmail.com,
Passport No: L5535528
Career Objective:
To join an organization as Mechanical Engineer where I can give practical approach to my
knowledge and talent as per my job requirement in an efficient manner, which would be helpful in
the company growth and would strengthen my career also.
Work Experience
➢ 18th February 2014 – Present working.
Mechanical Engineer (Supervisor in INDUSTRIAL SERVICES ON LINES CO.LTD,)
P.O BOX 10314 Tareeq -124, JUBAIL INDUSTRIAL CITY KINGDOM OF SAUDI ARABIA
-31961
Work Experience
 Performed corrective predictive maintenance and preventative maintenance on equipments
centrifugal pump (Mechanical seal repair, Alignment, and Vibration monitoring).
 Plate and frame heat exchanger servicing (Chemical cleaning, Hydro jetting, re –gasketting, Hydro
test, and die penetrate test of the plate).
 Shell and tube heat exchanger maintenance (Chemical cleaning, Hydro jetting, Hydro test and
pneumatic test).
 Bundle pulling of the shell and tube heat exchanger.
 Maintenance of the Diaphragm pump, jetting machine.
 and operation of the equipment (Air compressor, Air dryer, Steam boiler, Oil flushing pump, Jetting
machine and Generator). Evaluated maintenance records of mechanical equipment on a regular
basis and ensured that equipments were effectively.
 Good understanding of mechanical maintenance methods and procedures and standards
Ability to interpret mechanical maintenance methods and safety procedures.
 Operational knowledge of boilers, auxiliary rotary equipments.
 Outstanding ability to interpret technical manuals and schematics drawing.

3. Heat Exchanger to carry out the work of
Shell and tub heat exchanger
-boiler heat,
-boiler
Manual cleaning, Hydro jetting, of heat exchanger,
Tube cleaning of complete Maintenance heat exchanger & hydro Testing.
Pipeline Service to carry out the work of
-commissioning and commissioning
Preparing the looping drawing for the site.
(AUTOCAD P&ID, PFD and Iso metric drawing) and mobilization the site for chemical
cleaning, oil flushing, soda ash circulation, pigging, steam blowing and nitrogen purging.
Prepared schedule for project and procured necessary raw materials and man power for
project and Hydro test of the fittings.
Site Mobilization.
➢ 1) Chemical Cleaning of HRSG Boiler and bfw line Qurrayaha Combined cycle power
plant, Qurrayaha.
➢ 2) Chemical cleaning of cooling water line Saudi key an ( Sabic),
➢ 3) Acetic Acid Transfer in Aromatic area ,Ibn Rasheed (Yanbu) ,
➢ 4) Sulfuric Acid transfer in Alkylation unit Satorp.
➢ 5) Chemical cleaning LP,HP,MP steam line and BFW line ,Oil flushing lube oil line unit
pKG-3 and PKG-4 unit (SRU 1,2,3& 4) and steam blowing suffer handling line in Wasit
Gas Plant (Aramco),
➢ Hydro jetting in fin fan heat exchanger internal tube cleaning PDH Area emergency shutdown,
TASNEE ( Sabic)
➢ 6) Catalyst unloading from the reactor, Chemical Cleaning cooling water line, Plate heat
exchanger and process gas line in shutdown project, CHEAMNOL.
➢ 7) Dry ice blasting in furnace ,Saudi Chevron (Schem)
➢ 8) Degreasing waste water neutralization from HRSG boiler (Ma’adeen Plant)
➢ 9) Chemical cleaning of blow down line in Saudi Chevron(Schem)
➢ 10) Hydro jetting of internal tube cleaning Swcc (saline water conversion plant )

4. Professional strength
Chemical Testing Experience:
 1) Alkalinity testing in degreasing method.
 2) Acid Concentration testing in acid Pickling
 3) Testing of iron value
 4) Testing of ph value ,conductivity ,Tds ,Turbidity etc
 5) Iron value checking through EDTA method.
 6)Testing the Nas value through particle count meter
 quality Inspection Engineer in JBM GROUP(Thai Summit Neel Auto Pvt.Ltd)
C-1, MIDC, Chakan Industrial Area, Chakan, Distt. Pune - 410501, Maharashtra
August 2013 – January 2014 (6 months)
 Check the production process and check all spare parts, Piston,
Cylinder block, connecting rod, LH coverers, RH covers Denting, painting, finishing.
Extensive knowledge of designing, using, repairing and maintaining machines
and tool. Possess excellent decision -making and time management skills.
Ability to solve complex problems by using scientific rules and methods.
Extensive knowledge of designing techniques, tools, and principles involved in production
technical plans, blueprints, drawings, and models.
Possess comprehensive knowledge of circuit boards, chips, and electronic equipment.
Familiar with quality control, production processes, costs, and techniques for increasing
effective manufacture and distribution of goods.
Ability to work under pressure and handle multiple tasks.
1 Month Vocational Training in HEC (HEAVY ENGINEERING CORPORATION LIMITED),DHURWA,
RANCHI, JHARKHAND June-July 2012.
Experienced all the activities in the FFP (FOUNDRY FORGE PLANT), HMBP (HEAVY MACHINE
BUILDING PLANT) AND HMTP (HEAVY MACHINE TOOLS PLANT) worked on the project named
‘Practical Exposure of Various Activities in Casting and Forgings.
I have got the excellent feedbacks for my training project work during the vocational training.
I have been taking part in extracurricular activities.
Design & Analysis OF Radial Engine. The model is designed in pro-E
and translated to Ansys 13.0.
Worked on Design OF Steam Turbine And Control Systems.
Training and Projects:
Mainly I worked on Main Project:
Mini Project:

5.  Done AutoCAD 2012 - 2013.
 Done Pro-E 2013.
 Done Ansys 13.0 2013.
 Languages: C AND DS.
 Operating system : Windows XP/2007/2003 SERVER
 Software Application : MS-Word , MS-PowerPoint
 Reading.
 Travelling.
 Listening songs.
.
Date of Birth - 5th
Aug1992
Father’s Name - Abdul Sattar
Mother’s Name - Mumtaj Shrien
Marital status - Unmarried
Permanent Address - 8, Gewal Bigha near Maulana Masjid .Gaya, B i h a r -823001.
Blood Group - O-positive
English.
Urdu.
Hindi
I hereby declare that the information furnished above is true to the best of my knowledge.
Date: 22-06-2016.
Place: Saudi Arabia Md Saddam Hussain
Personnel Information
Computer Skills
Certifications
Interests and Hobbies:
Languages Known:
Declaration