1. Ernesto Alberto Avila Salcedo
Oaxaca # 600
Col. La Sierrita
Frontera Coahuila Mex.
866 1075229 Cel.
866 6356556 home
e-mail. avilasalcedo@outlook.com
OBJETIVE: To be part of a company where I can Use my current skills, as well as learn .
New Technologies to improve my effectiveness as an Manager.
EDUCATION: Universidad Autonoma del Noreste TORREON COAH.
Bachelor’s Degree- Industrial Engineer 2000 – 2004
Principal Topic- Manufacturing
PROFESIONAL
EXPERIENCE:
Manufacturing Manager – Actual
Lear Corporation, Frontera Coahuila Mex.
 Responsible to controlled all the lines in to the plant
 Responsible to Supervisors coordinate
 Responsible to reduce scrap indicators
 Responsible for increase productivity
 Responsible to programming line production
 4 months training on Holland Michigan for this position
 Responsible to transfer and manual press production
 Coordination of service department ( tool room and manto)
BU Sewing Manager on CNI Brenamex Acu February 2015 –August 2015
 Responsible to controlled the sewing lines in to the plant
 Responsible to 16 Supervisors
 Responsible to reduce scrap indicators
 Responsible for increase productivity
 Responsible for more than 600 people on production

2. Production Sewing and Cutting Manager December 2013-February 2015
JCI, Monclova Coahuila Mex.
 Responsible to controlled the sewing and cutting lines in to the plant
 Responsible to 4 Supeintendent coordinate and 25 Supervisors
 Responsible to reduce scrap indicators
 Responsible for increase productivity
 Responsible for more than 1800 people on production
Production Sewing BU Manager September 2012 – December 2013
HFI Mex., Frontera Coahuila Mex.
 Responsible to controlled the sewing lines in to the plant
 Responsible to Supervisors coordinate
 Responsible to reduce scrap indicators
 Responsible for increase productivity
 Responsible to engineering coordinate
 Responsible to Quality coordinate
 Responsible to Planners coordinate
Production Manager - April 2010- September 2012
Lear Corporation, Frontera Coahuila Mex.
 Responsible to controlled all the lines in to the plant
 Responsible to Supervisors coordinate
 Responsible to reduce scrap indicators
 Responsible for increase productivity
 Responsible to programming line production
 4 months training on Holland Michigan for this position
 Responsible to transfer and manual press production
 Coordination of service department ( tool room and manto)
Quality Superintendent - July 2007 – March 2010
Lear Corporation, Frontera Coahuila Mex.
 Responsible to controlled all the lines in to the plant
 Responsible to coordinate at all the Quality Engineers
 Responsible to coordinate the Laboratory
 Responsible to make a Quality Alerts and Implement new poke yokes
 Responsible for cut & etch on the welder
 Responsible for all welders lines
Quality Enginner June 2006 – July 2007
Takata de Mexico, Frontera Coahuila Mex.
 Responsible to controlled 5 Production Lines
 Responsible to customer attend and response
 Responsible to reduce the ppm’s and ippm’s
 Responsible to make a Quality Alerts and Implement new poke yokes

3. Product Engineer- March 2003 – March 2006
Cooper Standard Automotive, Division fluid systems, Torreon Coahuila Mexico
Area EGR’s, transfill tubes, dipstick tubes and water lines
- Responsible for product preplanning coordination from design stage to start
. Production at plant level
- Responsible for receive and launch new products at plant level, reviewing prints,
Define process and coordinate launch meeting to define equipment and tooling
Required for new products
- Responsible of order the equipment, construction and manage the budget for
each new part number launched
- Responsible of complete the APQP books, PPAP, FMEA and Control Plan, also
to approve the PAP’s components.
- Responsible to define the packaging proposal and attend pre-production pilot run
in the Engine plants and Assembly plants.
Design Engineer September 2002 March 2003
 New tooling design in Mechanical Program for a new projects
Tool Maker(Tube Benders) March 1998 – September 2002
Cooper Standard Automotive, Division fluids systems, Torreon Coahuila Mex.
 Responsible for build benders, press and tooling for end-forms tubes
 Responsible for components order
 Responsible for prototype constructions
 Responsible for tooling adjustment
Welder - April 1995 - December 1997
Mid west trailer supply Wichita Ks. USA
 Responsible for weld and cut the transversal direction
PROFESSIONAL
SKILLS:
 Knowledge in LEADS, BRIGHPORT, APQP 2004, PPAP, FMEA, KAN
BAN,. KAISEN, PNEUMATIC and WELD
 Word, Exel, Mechanical, Powerpoint and Autocad
 Fluent on Spanish and English languages
 Courses: Empowering, Ts 16949, TPM ( Total Productive Maintenance ),
APQP SMED, Efective Manager, Management, 5s and GDT