Curriculum Vitae 3

1 | P a g e
CURRICULUM VITAE
Address : Perum Nusa Indah Blok D-4 No.3
Pos Code 29433 RW.22 Kel.Mangsang Kec.sei beduk Kota Batam
HP. +6285360400292, e-mail : irwan.syaputra.el@gmail.com
Full Name : Irwan Syaputra, Amd
Place and Date of Birth : Medan, May 08th 1985
Sex : Male
Religion : Moslem
Status : Married
Height / Weight : 170 cm / 50 Kg
Graduated : Polytechnic of North Sumatera
Major : Electrical
IPK : 3.04
Nationality : Indonesian
Address : Perum Nusa Indah Blok D-4
No.3 Tnj Piayu Batam
Mobile Phone : +6285360400292
1992 - 1998: State Elementary School No. 064958 Medan
1998 - 2001: State Junior High School No.6 Medan
2001 - 2004: State Senior High School No.8 Medan
2005 - 2008: Polytechnic of Nort Sumatra, Eletric major
Concentration of Instrument and Controlling
 2016 till now
PT. Exabb Energy Nusantara with project Electrical and Contracting at
Ship Repair and Service As Site Supervisor Electrical and Instrument.
Job responsibilities as followed:
~ To ensure making schedules are meet plan owner and client.
~ assigning work and training employees.
~ Given more motivate electricians to increase their productivity and meet
work goals.
~ To ensure the proper maintenance of equipment, compliance with
electrical codes and adherence to safety regulations.
~ I has assist with electrical system installation, troubleshooting and repair
as needed.
~ Modify electrical systems and circuits if necessary.
~ as well as contributing to improved designs and manufacturing processes
are other common job functions.
~ In addition have administrative duties such as purchase supplies, ensure
adequate inventory, plan budgets, prioritize purchases, prepare cost estimates
and document their purchases.
Personal Details
Working
Experience
Education
Background

2 | P a g e
CURRICULUM VITAE
~I am also keep records of electrical operations, payrolls and timesheets.
Some electrical supervisors play a role in hiring, firing and evaluating
employees.
 2015 till 2016
PT. TPE Indonesia with name project is Yamal at Subcon PT SMOE
Indonesia as QC Electrical and Instrument.
Job responsibilities as followed :
~Performing and to do mechanical completion and pre-commissioning and
prepare to report the result activity as document Inspection project.
~Make sure and created Inspection Test Report and giving offering advice if any
abnormality and wrongly while build project with referring specification and
procedure project.
~Ensure and checking material specification and selection are met requirement
standard project.
~Ensure Electrical, Instrument, equipment are properly function during Testing
process.
~Scheduling and coordination with supervision should be tight deadline .
~Ensuring calibration instrument and electrical are calibrated certificate and have
while pre-commissioning and commissioning.
~Inspection processing Pulling cable, Dressing, Tagging process for power
cable, Control Cable, and Signal cable.
~Supporting Installation Cable Ladder routing and Sub cable way, bracket
panel, and Support for electrical equipment multiple.
~Supporting termination work such as cable glanding, connection, and tagging
process.
~Good knowledge Electrical Equipment such as Generator, Main Switch Board,
Distribution Board, Junction Box, Lighting, Switching, socket, Smock detector,
Starter panel, Control Panel, Motor pump, Blower, Frequency Driver and ETC.
~Have capabilities to used Multi Tester, Insulation Tester, Ampere Meter, Local
Area Network Tester and Phasa Tester.
~Good knowledge pre commissioning, Testing, and Commissioning process
such as Continuity Test (Looping check), Insulation Test, Starter Panel Control
Test, and Generator Load Test.
~Capability to reading Single Line Diagram, circuit electric installation, Wiring
Diagram MCB, DB, Control Starter Panel, Generator, Motor and Transformer,
Cable Ladder Routing and layout electrical equipment.
 2013 till 2015
PT. Ciba Vision Responsible position as Jr Engineer of Water
Treatment Plant System at Facility Department.
~Support production to getting yield target with maintain and supply distribution

3 | P a g e
CURRICULUM VITAE
USP (US pharmacopeia) water, UPW (ultra purified water), Saline with H2O2,
Saline with Copolymer, Saline Hydration and Saline Packaging system process.
~Ensure Facilities and water system utilities and other related function are
available and it are compliance state.
~Inspection and monitoring report to control pipes line distribution, Tanks
storage, UV Sterilize, UV chlorination and UV Ozone destruction, Control
Valves, Manual Valves, Pressure safety Valves, Pressure Indicator Transmitter,
Sensor Level Transmitter, Flow control Transmitter, Equipment, panel Control
PLC, Pumps Distribution, HMI display control, Vessel membrane ETC.
~Ensure timely Preventive Maintenance, Repair, Troubleshoot, Analyze and
calibration instrument, equipment and machine process.
~Perform to validation annual are implemented such as Installation
Qualification, Operational Qualification, Performance Qualification, pre-
commissioning, and Commissioning procedure.
~Make sure Safety and Maintenance Control procedure are performed
accordingly.
~Perform to establish corrective action and preventive action for analyzing,
investigating and identifies possible the root causes of the problem and even
trouble happening with used Fishbone Analysis (Machine, Method, Material,
Man, Environment and Process) and Five Why Analysis.
~Ensure spare part consumption are available during PM and repair with control
registration part and request for quotation ordering part.
~Perform to repair, analysis, trouble shooting and handling machine such as
Pump, Valve, Solenoid, Compressor Air, Ciller Supply and Boiler Machine,
HMI(Display Touch Screen Indicator) control, PLC Siemens and Allen Bradley,
sensor and mechanism machine process with referenced standard operating
procedure (SOP) and Quality requirement.
~Ensure chemicals consumption (Hydrogen Peroxide, Sodium Hypo-chloride,
Sodium Hydrochloride, Hydrochloride Acid, Sodium Chloride, Copolymer,
Sodium Borate, Boride Acid, Di Basic and Mono Basic ) are using with
appropriate and has follow instruction as MSDS requirement.
~Conduct to key performance index with referred to getting better target than
previously.
~Monitor and update machine performance report as Overall Equipment
Effectiveness.
~Ensure and Comply to implemented are relevant ISO 9001 (Quality product
standard) and ISO 14001 (Environment management standard)
~Conduct to on the job training for new hires and retraining as and when deemed
necessary.
 2012 till 2013
PT.EPSON Responsible position as Electrical Maintenance of IK-
Department.
~Support production in line for remodeling, new model introduction and
rework procedure.

4 | P a g e
CURRICULUM VITAE
~Monitoring and update performance record with reduce down time during
production processed.
~Repair, Analyze and Troubleshooting problem and defect product and
machine level.
~Analyze, modification and improvement PLC program as error alert while
instrument, Equipment, and mechanism machine performing.
~Conduct to Kaizen improvement as high increase machine efficiency and
effectiveness.
~Support to Engineering to test analysis failure production process and
product while running processed.
~Comply to implement all related quality requirement ISO 9001.
 2010 till 2012
PT Panasonic Electronic Device Responsible Position as Electrical
Maintenance of Production Engineering.
~Support production in line process with start flow from Blasting M/C,
Stacking Element, Bending and Cutting , Welding, Molding, Curing,
Inspection and Sealing product.
~Monitoring and update performance record with reduce down time during
production processed.
~Repair, Analyze and Troubleshooting problem and defect product and
machine level.
~Alignment and Adjustment CAM Follower positioning , chuck, Die cutting
and mechanism machine.
~Conduct to improvement as high increase machine efficiency and
effectiveness.
~Support to Engineering to test analysis failure production process and
product while running processed.
~Repair and Troubleshooting Equipment testing, sensor, solenoid, power
supply, Laser body marking, electric control.
~Comply to implement all related quality requirement ISO 9001.
 2008 till 2010
PT.ADD-PLUS Technologies Indonesia as Electrical Technician
At Engineering Department – Kenwood Division.
Job Responsibilities as followed:
~Support production in Line setup for model change, new model introduction
and rework procedure.
~Detect, Indentify and Troubleshoot defect and problem at Process, Product,
Equipments, and Machine level.

5 | P a g e
CURRICULUM VITAE
~Repair defects and establish effective corrective and preventive actions.
~Monitor and improve equipment, instrument, and machine performance.
~Conduct preventive maintenance and technical audits.
~Maintain and perform housekeeping practices.
~Promote safety and good working environment.
~Conduct on the job training for new hires and retraining as and when deemed
necessary.
~Comply to and implement all relevant ISO 9001 requirement and standards.
 2005 till 2007
Teacher course private for elementary and junior high student.
 2005
Test of English for International Communication of Polytechnic Nort
Sumatra.
 2003-2004
Computer Course at INTel Com (Information Technolagies Computer)
Medan.
 1999-2000
English Course at Grand Student English medan.
 2007
Installation LAN and Web Design Workshop of Electronic stars
Generation.
 2013
Electrical and Instrument Inspector at Offshore Technology Institute.
 2005
Participant on recognition activity and matriculate stock purchasing at
Polytechnic of North Sumatra
 2006
Activity committee programs islamic stock purchasing Polytechnic of Nort
Sumatra
 2007
Education seminar student committee Polytechnic of Nort Sumatra
 2007
Education
Informal
Training and
Committee

6 | P a g e
CURRICULUM VITAE
social faith and blood donor for help talasemia’s patient as executor chairman
 2009
RMNI(remaja mesjid nurul iman) Leadership training one Bintan's industrial
park
 young woman juvenile gathering islamic as Common secretary periode 2005-2006
 Electronic Moslem Communitty (EMC) as Common Secretary Polytechnic of
Nort Sumatra Periode 2006-2007
 Member of activity unit moslem studet(UKMI) Polytechnic of Nort Sumatra
Period of 2006-2007
 Social department chairman and prosperous of college student executive (BEM)
Polytechnic of Nort Sumatra at year 2006-2007
 Installing the Application Program and Operating System Microsoft Windows
 Able to operate Internet (e-mail, browsing, chat and download)
 Able to operate Eagle Application Program for Scematic Work Band and
Disign Electronic Divice circuit
 I have capability to operate Digital Equipment (Signal Generator, Modulation
Analyzer, Audio Analyzer, Frequency Counter, Spectrum Analyzer,
Multifunction Tester)
 Able to operate MATLAB Program to control and synchronize interface device
 Able to use, troubleshoot, modification and operate the PLC (Programmable
Logic Control)
Keyence, Mitsubishi, Allen Bready, Omron and Siemens Application
 Language English written and spoken
 Set up RB (Robo) 6 Axis
 Repair defect and troubleshoot defect and problems at process, product,
equipment and machine level
 Conduct preventive maintenance and technical plan scheduling
 Fluid control pneumatic
 Good knowledge of Instrument and Equipment as Pump Motor, Pressure, Flow,
Valve, Piping and leveling system
 Installation cable (wiring)
 Set up, Installation and remodeling new machines, Instruments and Equipments
 Modification and Improvement Electrical and control system
 Good knowledge I/O termination electrical panel
 Good Leadership and manage to subordinate structure
 Good Knowledge Cable Gland and Junction Box
Organization
Experience
Capabilities
Qualification

7 | P a g e
CURRICULUM VITAE
 Able to Read and understood of Electrical Schematic Diagram
 Knowledge of the Standard Project and Specification
 Knowledge of the Electrical Safety and Inspection process
 Knowledge of the Installation and Commissioning process
 Water Treatment System Onshore Project Batam since 2012-2013
This system to build by Veolia base on requirement specification project with
description as followed:
1.Water Incoming goes to Tank Storage as City Water
2.Dist Filter process with product specification count particle < 25
3.Softener System to produce soft water and Hardness has specification < 1.5
ppm (part per million)
4.Uflex Filtration system to getting silt density index < 2
5.UF product storage to Filtered Tank with conductivity value < 200 uS/Cm
With UV Chlorination to reduce chlorine residue
6.Orion II 8000 system are consist of RO (Reverse Osmosis) system, CDI
(Deionizer) system, UV sterilize and Final Filter 0.2 micron.
7.USP water system is product from DI goes to storage tank and make process
treatment with UV Ozone destruction, Final filter 0.2 micron and Mixed Bed
to maintain conductivity value < 1.5 uS/Cm.
8.Electrical and Instrument have controlling used PLC Siemens and HMI
display to monitor and control sequence process.
9.Validation Execution document such as IQP (Installation Qualification),
OQP (Operational Qualification) and PQP (Performance Qualification).
 HAV 3P and Nasuno project since 2011-2012
This system establish to produce Ink Cartridge Epson product with
description responsible as followed:
1.Setup I/O Bus Keyence application as KV 5500 main board processor unit,
Power unit KV-U7,KV-B16X, KV-C32X,KV-B16RC and ect.
2.Setup Instrument such as weighing scale, pressure regulator, Hephafilter,
HMI, Checker device, sensor CKD, Cylinder and Solenoid.
3.Setup and Install tubing pressure and re-winding process
4.Setup and install electrical panel such as power supply, CB and MCB,
Relay, Contactor circuit and termination process.
5.Wiring and Tagging process
6.Install Cable Gland and Tray cable
7. Test and Commissioning function process
Overhaul and Improvement Stacking Machine from type three to four
Since 2011
Project
Involvement

8 | P a g e
CURRICULUM VITAE
This project to increment and develop machine process from three step to four
step with added chuck and stacking machine, description responsible as
followed:
1.Setup and install chuck alignment machine
2.Added Input and Output control analog to PLC Omron
3.Install Wiring and Air Tubing pressure
4.Test and commissioning to make sure functional each part after installation
process has finish.
New product Introduction with Handy Talky Communication
Since 2009
This project as Excellence product at Kenwood company within competitor
communication application who constitute required market with description
responsible as followed:
1.Setup and install instrument to measure value such as Audio Analyzer.
Spectrum Analyzer, Oscilloscope, Frequency Analyzer, Modulation analyzer,
Power Supply and Aeroflex Analyzer
2.Calibration power setting and make sure value still within specification
3.Analyze, troubleshoot and solving problem device and instrument process
4.Reporting and to presentation result of this project
5.Reevalution and commissioning project installation during process passage
this project
6.Install application software visual basic to measurement device and product
7.To perform Functional test and rectify electrical and instrument process
Here with my qualification skill, experience and best performance. I want
taking apart to growth up and to more benefit your company’s
Thus these CV’s list I created with the truth. Thanks for your attention .
Kind Regards
Irwan Syaputra, Amd

Curriculum Vitae 3

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Viewers also liked

Viewers also liked (12)

Similar to Curriculum Vitae 3

Similar to Curriculum Vitae 3 (20)

Curriculum Vitae 3