Matteo Vandoni has over 20 years of experience in yacht and boat design, project management, and production. He has worked as a designer, technical director, and partner for various companies in Italy. His areas of expertise include design, engineering, production supervision, and business development for marine vessels. He holds a degree in Yacht Design from the University of Genoa.
Ms. Wilson has over 30 years of experience in structural ship repair, maintenance, and design. She is experienced in fabrication, engineering support, blueprint reading, technical writing, and quality assurance. She has extensive experience performing structural design work using AutoCAD, developing drawings from various references and standards. She has worked on projects for the U.S. Navy involving aircraft carriers, destroyers, and other vessels.
This document provides a summary of the qualifications and experience of Gary Stephen Keay, including:
1) Over 25 years of experience in offshore oil and gas projects as a deputy construction manager, responsible for managing multi-national workforces and technical aspects of projects.
2) Extensive experience in subsea construction operations such as pipe laying, umbilical operations, and manifold deployments.
3) Detailed listing of safety and technical training certificates obtained over his career.
4) Employment history describing his roles and responsibilities in offshore construction and project management positions over the past 10 years.
Concept Yachts was founded in 2003 and now consists of four divisions specializing in composites, yacht finishing, teak, and automation/entertainment systems. They offer mobile and manufacturing services globally, including composite construction, fairing and painting, teak decking, and high-end automation. Their experienced team of over 150 technicians have worked on many prestigious superyacht projects.
Take your first step at International Maritime Academy, a leading maritime institute that offers marine education in Chennai, including naval architecture & ship building courses.
The document provides an overview of the Department of Naval Architecture and Marine Engineering at the University of Strathclyde. It discusses the courses offered, including naval architecture, marine engineering, small craft engineering, and ocean engineering. It outlines the facilities available to students, such as laboratories and a wave tank. It also describes opportunities for students, including industry placements, scholarships, and international programs. Graduates have career prospects in fields like ship design, offshore oil and gas, research, and more.
The applicant, Lea Murdoch, is applying for rigging vacancies offshore and onshore. They have over 20 years of experience as a Level 4 Rigger and Rope Access Technician, with qualifications including NVQ Level 3, gold ACE card, and OPITO certifications. They are seeking short or long term work and believe they would be a valuable asset to a company due to their skills, experience, and ability to work well in a team.
The document provides a summary of the candidate's experience as a HD diesel fitter and maintenance supervisor in the mining industry, with over 13 years of experience. It details their most recent role as a contract HD diesel fitter in New Caledonia servicing and repairing heavy machinery. Previous experience includes roles as a PM coordinator and supervisor in Papua New Guinea coordinating maintenance and servicing of mobile fleets. Further experience is listed as a diesel fitter in Australia servicing ancillary mining fleets. Relevant qualifications and licenses are also included.
Ms. Wilson has over 30 years of experience in structural ship repair, maintenance, and design. She is experienced in fabrication, engineering support, blueprint reading, technical writing, and quality assurance. She has extensive experience performing structural design work using AutoCAD, developing drawings from various references and standards. She has worked on projects for the U.S. Navy involving aircraft carriers, destroyers, and other vessels.
This document provides a summary of the qualifications and experience of Gary Stephen Keay, including:
1) Over 25 years of experience in offshore oil and gas projects as a deputy construction manager, responsible for managing multi-national workforces and technical aspects of projects.
2) Extensive experience in subsea construction operations such as pipe laying, umbilical operations, and manifold deployments.
3) Detailed listing of safety and technical training certificates obtained over his career.
4) Employment history describing his roles and responsibilities in offshore construction and project management positions over the past 10 years.
Concept Yachts was founded in 2003 and now consists of four divisions specializing in composites, yacht finishing, teak, and automation/entertainment systems. They offer mobile and manufacturing services globally, including composite construction, fairing and painting, teak decking, and high-end automation. Their experienced team of over 150 technicians have worked on many prestigious superyacht projects.
Take your first step at International Maritime Academy, a leading maritime institute that offers marine education in Chennai, including naval architecture & ship building courses.
The document provides an overview of the Department of Naval Architecture and Marine Engineering at the University of Strathclyde. It discusses the courses offered, including naval architecture, marine engineering, small craft engineering, and ocean engineering. It outlines the facilities available to students, such as laboratories and a wave tank. It also describes opportunities for students, including industry placements, scholarships, and international programs. Graduates have career prospects in fields like ship design, offshore oil and gas, research, and more.
The applicant, Lea Murdoch, is applying for rigging vacancies offshore and onshore. They have over 20 years of experience as a Level 4 Rigger and Rope Access Technician, with qualifications including NVQ Level 3, gold ACE card, and OPITO certifications. They are seeking short or long term work and believe they would be a valuable asset to a company due to their skills, experience, and ability to work well in a team.
The document provides a summary of the candidate's experience as a HD diesel fitter and maintenance supervisor in the mining industry, with over 13 years of experience. It details their most recent role as a contract HD diesel fitter in New Caledonia servicing and repairing heavy machinery. Previous experience includes roles as a PM coordinator and supervisor in Papua New Guinea coordinating maintenance and servicing of mobile fleets. Further experience is listed as a diesel fitter in Australia servicing ancillary mining fleets. Relevant qualifications and licenses are also included.
David Creamer has over 30 years of experience as a general contractor, construction consultant, and safety trainer. He is the president of Creamer Construction Company and provides general contracting, construction consulting, and safety training services. He has extensive expertise in areas such as concrete, masonry, steel framing, carpentry, roofing, and more. He also has certifications in construction safety training, mold assessment and remediation, home inspection, and first aid/CPR instruction.
Roll-Lift is an engineering and transportation company specializing in heavy-lift projects. It focuses on unique, customized solutions for each client's needs from factory to final installation. Roll-Lift has extensive experience and a large fleet of specialized equipment to handle all phases and challenges of heavy-lift projects in industries such as oil and gas, petrochemical, offshore, power, civil engineering and more. It prides itself on its problem-solving approach and ability to deliver total transportation and installation solutions.
This document is Ian Purdie's resume. It summarizes his over 30 years of experience in the marine industry, including 6 years managing new builds in Mexico and Southeast Asia. It also lists his qualifications and employment history working on projects like new vessel builds, technical management, and construction management.
Ghazanfar Ali Khan has over 14 years of experience as a civil inspector supervising infrastructure projects in Pakistan and Saudi Arabia. His roles have included monitoring construction to ensure quality and compliance with plans and specifications, reviewing design documents, supervising earthworks, concrete work, and more. He is currently working as a civil inspector on the $25 billion Riyadh Metro project in Saudi Arabia.
Ramesh Chander has over 20 years of experience in rigging and lifting operations. He has worked as a rigging and lifting supervisor on numerous projects in countries like Qatar, Bahrain, Yemen, Saudi Arabia, India, and Congo. Some of the major companies he has worked with include Bechtel, Tecnip, Petrofac, Kentz, Urbacon Trading & Contracting, and Nasser Abd Mohammed Company. He is knowledgeable about rigging plans, safety standards, equipment inspection, and ensuring lifting operations are performed safely according to approved procedures.
This document is a curriculum vitae for Ahmed Abou El Soud El Zohary Soliman. It outlines his personal details, education history including degrees in mechanical engineering and commercial diving certifications. It also provides details of his work experience from 2008 to present in inspection and diving roles for oil and gas companies in UAE, Malaysia, and Egypt. Responsibilities included underwater inspection, reporting, and coordinating diving projects. The CV lists relevant technical, computer, and language skills and concludes with a request for references.
This resume summarizes the qualifications and experience of Jeyakkumar Rajendiran as a crane and forklift operator with over 20 years of experience. He has operated cranes in Saudi Arabia, Afghanistan, and India on various construction projects. His skills include operating tower, mobile, and overhead cranes to lift machinery and other heavy objects. He is also qualified to operate forklifts and other heavy vehicles and equipment.
Rodolfo Sturlese is an Italian mechanical engineer with over 40 years of experience in engineering, mechanical systems, piping, steel structures, lifting equipment, and project management. He has worked on numerous industrial projects around the world, specializing in oil/gas, power plants, and steel manufacturing. His experience includes engineering design, equipment installation, commissioning, and ensuring compliance with safety and quality standards.
Jeffrey Wood provides his curriculum vitae which details his extensive qualifications and work experience in engineering and ship management. He has over 40 years of experience working internationally in roles such as Chief Engineer, Machinery Supervisor, and Site Manager. His most recent role is as a Consultant for Schulte Marine Concept Ltd in Shanghai, China where he performs vessel inspections and specification reviews. He is seeking a new position that utilizes his knowledge and skills.
Cees Klerk has over 35 years of experience in engineering, project management, and quality control roles related to offshore structures, vessels, and equipment. He has expertise in structural engineering, mechanical engineering, hydraulic systems, electrical systems, and lift rigging/sea fastening designs. Key experiences include engineering supervisor roles during vessel construction in China, Singapore, and Indonesia, as well as structural engineering leadership positions with various offshore companies in Europe, the Middle East, Africa, and Asia. He is skilled in AutoCAD, structural analysis software, and coordinating engineering work across design, yard, and commissioning phases of projects.
Roberto Dl. Anore is applying for the position of Lifting & Rigging Supervisor. He has over 15 years of experience in lifting, rigging, and maintenance roles. He holds several certificates in lifting supervision, rigging, and slinging. His most recent role was as a Lifting Supervisor at Baraka Nuclear Power Plant in Abu Dhabi, where he planned and conducted lifting operations, arranged safety training, and issued permits. He is seeking to use his expertise in lifting plans, safety procedures, and equipment inspection in the role of Lifting & Rigging Supervisor.
This document provides a summary of Roger Newton-Darby's qualifications and professional experience. It lists his contact information, qualifications which include HSE diving certifications, and over 10 years of experience in various roles such as air diver, deck crew, and rigger for companies performing offshore oil and gas, renewable energy, and civil engineering projects. His experience includes tasks such as equipment preparation and deployment, installation and recovery of structures, and underwater construction work to depths of over 20 meters.
This document provides a summary of Eswaran Shanmugam's curriculum vitae. It outlines his educational background, professional certifications, areas of knowledge and experience, job history, and objectives. He has over 9 years of experience in mechanical engineering, quality assurance, and health and safety. Currently he works as a Senior Lifting Equipment Inspector, where he oversees inspection and certification of various lifting equipment. His objective is to seek a suitable position utilizing his engineering and management skills.
The WeedsWest Group is a global company with four business lines: equipment, trading, automation, and metalwork. It has approved projects in Europe, America, Africa, and Asia. The metalwork division, WWMetalwork, is a large Portuguese manufacturer with over 40 years of experience in engineering, fabrication, and assembly projects for water, oil and gas, construction, and other industries. It has the skills and equipment to handle projects from design to on-site installation and long-term maintenance.
WeedsWest Global Solutions is a group of companies that provides integrated solutions in technological consultancy, construction, metalwork, equipment supply, and materials supply. One of its companies, Laurel, is a leading Portuguese metalworking manufacturer with over 40 years of experience in industries like water, oil/gas, construction, and more. Laurel excels in engineering, fabrication, installation, and after-sales support of metal structures, piping systems, tanks, treatment plants, and other industrial equipment.
This document contains contact information and details about the Scaffolding and Formwork Division of Al Futtaim Engineering. It provides addresses and contact details for offices in Dubai and Qatar. It describes the division as having provided access and formwork solutions in the Middle East since 1975. It lists the various certifications and standards the division adheres to and some of the prominent clients and projects it has worked with.
Rivelino Ruiz Ramón has over 15 years of experience in the oil and gas industry, primarily focused on offshore drilling rig operations and maintenance. He has worked for companies such as Typhoon Offshore, Trese S.A., and Nabors Drilling Mexico, holding roles such as Offshore Operations Coordinator and Preventative Maintenance Technician. Rivelino is bilingual in English and Spanish and has extensive experience coordinating projects between Mexico, China, and other countries. He has a degree in Industrial Engineering and various technical certifications.
This document provides a summary of Carl Perrigue's qualifications and work experience. He has over 25 years of experience in mechanical and offshore roles, including 10+ years as a Senior Mechanical Supervisor for NOV. He is experienced in managing project teams, rig maintenance, and troubleshooting to minimize downtime. Perrigue has comprehensive knowledge and experience working with mechanical equipment on offshore rigs and vessels.
This document discusses the development of guidelines for selecting bridge railings tested to TL-2 through TL-5 levels. It reviews literature on bridge railing performance, crash tests, and state practices. A survey of transportation agencies found varying approaches to selecting railing test levels. The document proposes a risk assessment process for selecting railing levels based on estimated crash frequency and severity at a bridge location. Tables are provided to help engineers select the appropriate railing test level based on site and traffic conditions.
Shakil Ahmed has over 30 years of experience in oilfield testing services including drill stem testing, surface well testing, reservoir sampling, and testing data acquisition. He has a Bachelor's and Master's degree in chemistry and additional technical training. His experience includes roles as a field engineer, job supervisor, field manager, and sales and marketing manager. He is currently a senior project manager for a logging company in Pakistan.
Rodriguez Consulting provides yacht design, engineering, and construction management services. Their process involves conceptual design, technical and systems design, production planning, detail drawings, and yacht building/fitting. They work with various classification societies to ensure compliance. Their design fees typically range from 7-15% of construction costs. Key people include naval architects and yacht designers with decades of experience. Leopoldo Rodriguez leads the company with a background in both yachting and business management.
Wynne Luk is a Malaysian naval architect with over 5 years of experience in structural analysis, design, and marine warranty surveys. She has a Master's degree in Naval Architecture from the University of Newcastle upon Tyne and is an Associate Member of the Royal Institution of Naval Architects. Her experience includes structural analysis of offshore structures, mooring and stability analysis, structural design, and marine warranty surveys for DNV GL and other companies.
David Creamer has over 30 years of experience as a general contractor, construction consultant, and safety trainer. He is the president of Creamer Construction Company and provides general contracting, construction consulting, and safety training services. He has extensive expertise in areas such as concrete, masonry, steel framing, carpentry, roofing, and more. He also has certifications in construction safety training, mold assessment and remediation, home inspection, and first aid/CPR instruction.
Roll-Lift is an engineering and transportation company specializing in heavy-lift projects. It focuses on unique, customized solutions for each client's needs from factory to final installation. Roll-Lift has extensive experience and a large fleet of specialized equipment to handle all phases and challenges of heavy-lift projects in industries such as oil and gas, petrochemical, offshore, power, civil engineering and more. It prides itself on its problem-solving approach and ability to deliver total transportation and installation solutions.
This document is Ian Purdie's resume. It summarizes his over 30 years of experience in the marine industry, including 6 years managing new builds in Mexico and Southeast Asia. It also lists his qualifications and employment history working on projects like new vessel builds, technical management, and construction management.
Ghazanfar Ali Khan has over 14 years of experience as a civil inspector supervising infrastructure projects in Pakistan and Saudi Arabia. His roles have included monitoring construction to ensure quality and compliance with plans and specifications, reviewing design documents, supervising earthworks, concrete work, and more. He is currently working as a civil inspector on the $25 billion Riyadh Metro project in Saudi Arabia.
Ramesh Chander has over 20 years of experience in rigging and lifting operations. He has worked as a rigging and lifting supervisor on numerous projects in countries like Qatar, Bahrain, Yemen, Saudi Arabia, India, and Congo. Some of the major companies he has worked with include Bechtel, Tecnip, Petrofac, Kentz, Urbacon Trading & Contracting, and Nasser Abd Mohammed Company. He is knowledgeable about rigging plans, safety standards, equipment inspection, and ensuring lifting operations are performed safely according to approved procedures.
This document is a curriculum vitae for Ahmed Abou El Soud El Zohary Soliman. It outlines his personal details, education history including degrees in mechanical engineering and commercial diving certifications. It also provides details of his work experience from 2008 to present in inspection and diving roles for oil and gas companies in UAE, Malaysia, and Egypt. Responsibilities included underwater inspection, reporting, and coordinating diving projects. The CV lists relevant technical, computer, and language skills and concludes with a request for references.
This resume summarizes the qualifications and experience of Jeyakkumar Rajendiran as a crane and forklift operator with over 20 years of experience. He has operated cranes in Saudi Arabia, Afghanistan, and India on various construction projects. His skills include operating tower, mobile, and overhead cranes to lift machinery and other heavy objects. He is also qualified to operate forklifts and other heavy vehicles and equipment.
Rodolfo Sturlese is an Italian mechanical engineer with over 40 years of experience in engineering, mechanical systems, piping, steel structures, lifting equipment, and project management. He has worked on numerous industrial projects around the world, specializing in oil/gas, power plants, and steel manufacturing. His experience includes engineering design, equipment installation, commissioning, and ensuring compliance with safety and quality standards.
Jeffrey Wood provides his curriculum vitae which details his extensive qualifications and work experience in engineering and ship management. He has over 40 years of experience working internationally in roles such as Chief Engineer, Machinery Supervisor, and Site Manager. His most recent role is as a Consultant for Schulte Marine Concept Ltd in Shanghai, China where he performs vessel inspections and specification reviews. He is seeking a new position that utilizes his knowledge and skills.
Cees Klerk has over 35 years of experience in engineering, project management, and quality control roles related to offshore structures, vessels, and equipment. He has expertise in structural engineering, mechanical engineering, hydraulic systems, electrical systems, and lift rigging/sea fastening designs. Key experiences include engineering supervisor roles during vessel construction in China, Singapore, and Indonesia, as well as structural engineering leadership positions with various offshore companies in Europe, the Middle East, Africa, and Asia. He is skilled in AutoCAD, structural analysis software, and coordinating engineering work across design, yard, and commissioning phases of projects.
Roberto Dl. Anore is applying for the position of Lifting & Rigging Supervisor. He has over 15 years of experience in lifting, rigging, and maintenance roles. He holds several certificates in lifting supervision, rigging, and slinging. His most recent role was as a Lifting Supervisor at Baraka Nuclear Power Plant in Abu Dhabi, where he planned and conducted lifting operations, arranged safety training, and issued permits. He is seeking to use his expertise in lifting plans, safety procedures, and equipment inspection in the role of Lifting & Rigging Supervisor.
This document provides a summary of Roger Newton-Darby's qualifications and professional experience. It lists his contact information, qualifications which include HSE diving certifications, and over 10 years of experience in various roles such as air diver, deck crew, and rigger for companies performing offshore oil and gas, renewable energy, and civil engineering projects. His experience includes tasks such as equipment preparation and deployment, installation and recovery of structures, and underwater construction work to depths of over 20 meters.
This document provides a summary of Eswaran Shanmugam's curriculum vitae. It outlines his educational background, professional certifications, areas of knowledge and experience, job history, and objectives. He has over 9 years of experience in mechanical engineering, quality assurance, and health and safety. Currently he works as a Senior Lifting Equipment Inspector, where he oversees inspection and certification of various lifting equipment. His objective is to seek a suitable position utilizing his engineering and management skills.
The WeedsWest Group is a global company with four business lines: equipment, trading, automation, and metalwork. It has approved projects in Europe, America, Africa, and Asia. The metalwork division, WWMetalwork, is a large Portuguese manufacturer with over 40 years of experience in engineering, fabrication, and assembly projects for water, oil and gas, construction, and other industries. It has the skills and equipment to handle projects from design to on-site installation and long-term maintenance.
WeedsWest Global Solutions is a group of companies that provides integrated solutions in technological consultancy, construction, metalwork, equipment supply, and materials supply. One of its companies, Laurel, is a leading Portuguese metalworking manufacturer with over 40 years of experience in industries like water, oil/gas, construction, and more. Laurel excels in engineering, fabrication, installation, and after-sales support of metal structures, piping systems, tanks, treatment plants, and other industrial equipment.
This document contains contact information and details about the Scaffolding and Formwork Division of Al Futtaim Engineering. It provides addresses and contact details for offices in Dubai and Qatar. It describes the division as having provided access and formwork solutions in the Middle East since 1975. It lists the various certifications and standards the division adheres to and some of the prominent clients and projects it has worked with.
Rivelino Ruiz Ramón has over 15 years of experience in the oil and gas industry, primarily focused on offshore drilling rig operations and maintenance. He has worked for companies such as Typhoon Offshore, Trese S.A., and Nabors Drilling Mexico, holding roles such as Offshore Operations Coordinator and Preventative Maintenance Technician. Rivelino is bilingual in English and Spanish and has extensive experience coordinating projects between Mexico, China, and other countries. He has a degree in Industrial Engineering and various technical certifications.
This document provides a summary of Carl Perrigue's qualifications and work experience. He has over 25 years of experience in mechanical and offshore roles, including 10+ years as a Senior Mechanical Supervisor for NOV. He is experienced in managing project teams, rig maintenance, and troubleshooting to minimize downtime. Perrigue has comprehensive knowledge and experience working with mechanical equipment on offshore rigs and vessels.
This document discusses the development of guidelines for selecting bridge railings tested to TL-2 through TL-5 levels. It reviews literature on bridge railing performance, crash tests, and state practices. A survey of transportation agencies found varying approaches to selecting railing test levels. The document proposes a risk assessment process for selecting railing levels based on estimated crash frequency and severity at a bridge location. Tables are provided to help engineers select the appropriate railing test level based on site and traffic conditions.
Shakil Ahmed has over 30 years of experience in oilfield testing services including drill stem testing, surface well testing, reservoir sampling, and testing data acquisition. He has a Bachelor's and Master's degree in chemistry and additional technical training. His experience includes roles as a field engineer, job supervisor, field manager, and sales and marketing manager. He is currently a senior project manager for a logging company in Pakistan.
Rodriguez Consulting provides yacht design, engineering, and construction management services. Their process involves conceptual design, technical and systems design, production planning, detail drawings, and yacht building/fitting. They work with various classification societies to ensure compliance. Their design fees typically range from 7-15% of construction costs. Key people include naval architects and yacht designers with decades of experience. Leopoldo Rodriguez leads the company with a background in both yachting and business management.
Wynne Luk is a Malaysian naval architect with over 5 years of experience in structural analysis, design, and marine warranty surveys. She has a Master's degree in Naval Architecture from the University of Newcastle upon Tyne and is an Associate Member of the Royal Institution of Naval Architects. Her experience includes structural analysis of offshore structures, mooring and stability analysis, structural design, and marine warranty surveys for DNV GL and other companies.
SeaTech is a marine design and engineering firm that has designed over 290 unique vessel designs since 2000. It provides customized design, engineering, and consultancy services for a wide range of vessels including harbor crafts, merchant vessels, offshore vessels, and specialized vessels. SeaTech prides itself on building strong relationships with clients and delivering high-quality, cost-effective solutions using the latest technologies. It has offices across Asia to better serve clients globally.
Marine Offshore Consultants provides marine survey, consultancy, and training services. It is a sole proprietorship registered in Norway and located in Aalesund. The sole proprietor, Capt. O.M. Bugge, has over 40 years of offshore oil and gas experience working worldwide as a marine surveyor and consultant. Marine Offshore Consultants works with associate company Maritime Associates Pte Ltd, which provides naval architecture, offshore engineering, and vessel management software services.
9 Essential services naval architects supply for the shipbuilding industryAlexandrą Maŋafu
We have put together a list of 9 essential services naval architects contribute with, in order to highlight their critical role in constructing and maintaining a functional and safe ship.
Damian Belmontes has over 16 years of experience as a drafter and designer for construction, oil and gas, and marine engineering projects. He has strong skills in AutoCAD, structural design, and producing drawings and reports. Currently he works as a Technical Data Specialist for Hull Support Services, where he creates 2D and 3D models, inspection reports, and maintains technical documents and equipment. He has a degree in Graphic Design and certificates in project management, structural steel detailing, and AutoCAD.
Dal Wagner has over 20 years of experience in mechanical design, most recently at Kodak where he designed various products from conception to production launch. He is an innovative, self-managed designer known for honoring commitments, completing projects on time and within budget. At Kodak, he independently solved complex design problems and led projects from research through drawings, prototyping and testing. He is an excellent communicator and team player with a proven track record of successful designs that reached commercialization.
HSB Marine is a Turkish company that specializes in designing, manufacturing, and installing floating marine structures. They utilize a single-source design-build approach to reduce costs and meet schedules. Their team of engineers, designers, and production specialists provide consulting, design, manufacturing, and construction services for floating docks, piers, marinas, and other marine structures using concrete, steel, and other materials. They have a factory in Adana, Turkey and also do on-site production for projects.
Nivaldo Curcio has over 20 years of experience in petroleum engineering, civil engineering, and project management. He is currently working as a drilling equipment specialist at Atlantico Sul Shipyard, where he is managing drilling and subsea equipment for a drillship project. Curcio has extensive technical skills and safety certifications for offshore oil and gas work.
Lee Raper is a draughtsman seeking new opportunities. He has over 15 years of experience in mechanical, subsea, and structural drafting. Some of his responsibilities include producing deck layouts, storyboards, fabrication drawings, and 3D models using software such as AutoCAD, Inventor, and Vault. He is proficient in mechanical, piping, and structural design for offshore oil and gas projects. Raper has a strong background working with subsea equipment and is willing to relocate for the right position.
Abdelaziz Taib has over 15 years of experience as a stress engineer performing structural analysis of aircraft components. His experience includes working on projects for Aerolia Canada, Jetaviation, Bombardier, and École Polytechnique de Montréal. He has extensive knowledge of stress analysis techniques including hand calculations, finite element modeling, and fatigue and damage tolerance analysis.
Anchorage technical services WLL. was established in 2011 primarily to support maritime industries and it started by doing subcontracts for China Harbour Engineering Co. while developing Hamad Port at various stages. Later the activities were diverted to other industries, and it continued until 31st October 2019 when the company was taken over by the current management team to support maritime industry in Qatar and worldwide fleet owners
Douglas Bathgate has over 36 years of experience in the offshore industry, including experience managing over 100 projects involving underwater survey, construction, and inspection. He has expertise in project management, risk assessment, client liaison, and equipment operation, including ROVs. His qualifications include certifications in survival training and offshore medical training. He speaks work place Spanish and rusty Italian.
George Aivaliotis is a naval architect and marine engineer with over 25 years of experience in ship management, new building supervision, and ship inspections. He has worked as a surveyor, superintendent engineer for tanker and bulk carrier fleets, technical manager, and external consultant. He is fluent in Greek and English and has extensive experience with classification societies, vetting inspections, drydocking, and repairs.
Steve Carrera has over 20 years of experience as a bilingual mechanical and structural designer. He has extensive experience designing offshore oilfield equipment using CAD software such as AutoCAD, Inventor, SolidWorks, and NX. Carrera has held various design roles at companies such as Baker Hughes, Ocean Energy Systems, and Southwest Tank, where he has designed hydraulic fracturing units, offshore vessels, pressure vessels, and more. He has mentored other designers and draftsmen and has a degree in design technology.
This document contains information about an experienced mechanical engineer specializing in mechanical design, structural analysis, 3D modeling, and project management for heavy vehicles, marine vessels, and other mechanical systems. The engineer has over 20 years of experience in conceptual design, stress analysis, finite element analysis, production documentation, and project work for a variety of industries. Contact information is provided for engineering consultation services related to mechanical design, modeling, analysis, and project support.
This document provides a summary of John J. Vekony's education and work experience. It details his MSc in Mechanical Engineering from the Technical University of Budapest in 1976 and management training in 1979. His work experience spans from 1976 to present and includes roles in mechanical engineering design, stress analysis, lifting equipment appraisal, and nuclear waste handling for various employers in Hungary, Canada, and the UK. He has extensive experience in design, analysis, project management, and training.
This document provides a skills summary and professional experience for Spencer D. Branting. It outlines his extensive experience with Solidworks and AutoCAD, as well as skills in mechanical engineering, manufacturing techniques, and foreign languages. It then lists Branting's professional experience over the past 15 years working for companies in various industries, including espresso machines, water jets, gas vaporization, and nuclear transportation. It concludes with his educational background and achievements including several science and engineering awards.
Michael Hill is seeking a junior desktop support role. He has 6 years of experience working in the superyacht industry, where he gained skills in IT support, project management, and customer service. His technical skills include knowledge of Windows and Mac operating systems, software like Office and Adobe, and building PCs. He is currently working towards CompTIA A+ and Cisco certifications. His most recent role was as Chief Officer on a 164-foot yacht, where his responsibilities included managing the deck department, setting up new computers and software, and assisting with AV systems. He is looking to transition his experience into a career in IT desktop support.
1. Curriculum Vitae Matteo Vandoni
Page 1 / 4
PERSONAL INFORMATION Matteo Vandoni
1, Via Sofocle, 20145, Milano, Italy
+39 02 36534732 (fax) +39 393 9389657
matteodiego.vandoni@fastwebnet.it
Skype: matteodondiego
Gender Male
Date of Birth October 20th
1972
Nationality Italian
WORK EXPERIENCE
DESIRED EMPLOYMENT
OCCUPATIONAL FIELD
Marine and yacht building industry: plant or production manager, project manager.
Design: interior, industrial and mechanical.
2011 - present Evolo Watches Milano
Designer, Project Manager and Partner
▪ Designer of 4 new watches, chronograph quartz, mechanical automatic day-date and mechanical
automatic chronograph.
▪ 3D math for CNC milling machine and 3D renderings.
▪ Brand style and logo developer.
▪ Graphic design for all models and collection.
▪ International business development.
2012 - 2015 M3V S.r.l.
Graphic designer
▪ Design, graphic projects and file setup for digital printing on 3D objects.
▪ Rasterlink files optimization and UV flat-bed digital printing.
2010 - 2012 Revolver Boats – Mini S.p.a.
Project Manager and Boatyard Manager
▪ 42’ powerboat preliminary drawings in cooperation with Michael Peters from the MPYD (Sarasota
USA). Definition of the whole project in collaboration with H3o Design Team (Arcore – ITALY),
complete engineering of all solutions adapted, interior design, RINA approved drawings for
constructions and CE Type Approval.
▪ Supervision of all production processes, from CNC milling of the moulds up to the delivery to the
client. Relationship with all suppliers and subcontractors for the supply of construction materials and
onboard systems.
▪ Analysis of the costs according to “works in progress” program .
▪ Launch, functional checks and equipment/performance tests.
▪ Presentation to the international press and responsible for the boat during the boat shows.
2003 - 2012 Seipem Technology S.r.l.
Technical Department Director and Partner
▪ Review and reorganization of the internal design department in order to obtain the certification ISO
9001:2000 VISION.
▪ Studies and plans for new technical solutions and design of special systems with trim tabs moved by
hydraulic cylinders.
▪ Design of a carbon fiber trim tab also fitted on a race boat with Ferrari F430 engine which holds two
world speed records.
▪ Engineering for hydraulic cylinders standard production (single and double acting) with internal oil
supply (no piping supply and return) and some new projects of cylinder manual or servo-assisted.
▪ Hydraulic cranes, gangway, mooring winch, fishing machinery.
2. Curriculum Vitae Matteo Vandoni
Page 2 / 4
2005 Wettpunkt.com - Play4Win
Offshore Class Evolution Boat Development Manager
▪ Development of the boat and structural calculations, hull definition, center of gravity and propulsion
system for a boat of 42' winner of the Offshore Powerboat P1 World Championship .
▪ Tests and inspections of the engines systems and propellers for pre-race tuning setup.
2003 - 2010 Metalstyle S.p.a.
Head of Technical Department and Designer
▪ Revision of existing projects of the standard production including accessories for recreational boating
in order to obtain the ISO 9001:2000 VISION notified by RINA.
▪ New projects: swim ladders, telescopic ladders (side/real), walkways, table supports (winner of the
"Special Mention" at the 2003 DAME Design Award in Amsterdam), foldable seats, helm wheels,
lights and bollards.
2000 - 2003 Alpa Yachts S.r.l.
Technical Director and Production Manager
▪ Complete design of a 37’ Fly Bridge motorboat: water lines with hydrostatic and hydrodynamic
calculations, construction drawings (hull, deck, structure and interiors) diagrams of all systems and
Powerplant, stability calculations and drawings for CE Type Approval.
▪ Design and restyling of the external lines of some existing models with non destroying modifications
of existing moulds (Alpa 42 Fly, Alpa Patriot 45, Alpa 54 Fly).
▪ Supervision of the production and works in progress in the three boatyards of Cinisello Balsamo
(Milano), Rovello Porro (Varese) and Cecina (Livorno).
▪ Auditor of the construction and production, with a focus on processing time and costs related to each
unit.
▪ Management and relationships with suppliers and business negotiations.
1998 - 2010 Panama Editore S.r.l.
Collaboration as a journalist for “Barche a Motore” magazine
▪ Articles, technical issues and special editions.
▪ Tests and sea trials of more than 100 boats between 35 and 80 feet..
1998 - 2000 Fabio Buzzi, FB Design S.r.l.
R&D and Technical Manager
▪ New technical office manager, resposable for the installation of computers, local area networks and
the choice of specific software for nautical design. Transfer of existing drawings from paper format to
CAD format.
▪ Design of mechanical components for the construction of TRIMAX surface drives (TRIMAX
company is now owned by the German group ZF Marine).
▪ Drawings, technical documentation, stability calculations and owner's manuals to obtain CE Type
Approval for several standard boats from 11 meters up to 24 meters.
▪ Hydrostatic and hydrodynamic hull calculations made on high-performance V-bottom boats, with
particular attention on the shape and size of the redans (transverse steps to the ventilate hull during
the motion, introduced in order to reduce drag and the wetted surface).
▪ Design and preliminary projects, to convert recreation/race boats into fast patrol boats for the
Financial Police, U.S. Coast Guard and Navy of several countries outside the EU.
▪ Collaboration with Sunseeker International Limited for the design of a special hi-performance hull for
a pleasure motorboat (XS2000 and XS-Sport) and for the motorization of Superhawk series with
TRIMAX Surface Drives.
▪ Model maker and carpenter assistant for wooden male models of a 38' Racer (later Sunseeker XS
series) for a 55’ boat superstructure (Gran Trimax - SONY ) and of a 42’ patrol boat superstructure.
3. Curriculum Vitae Matteo Vandoni
Page 3 / 4
EDUCATION AND TRAINING
PERSONAL SKILLS
1997 - 1998 Naca S.r.l. - Profilmarine
Head of Technical Department
▪ Cherokee 60 'and 80' construction drawings: plans, interior design, structures, onboard systems,
technical documentation with particular attention to the engine room and systems fittings. Hull
calculations and stability for the achievement of the CE Type Approval.
▪ Collaboration with external partner for the validation of hydrostatic and structural calculations.
1997 - 1998 Studio Luca Brenta & C.
Sailing Yacht Designer
▪ Member of the Design Team of two mega sloop sailing yachts 106’(WallyB) and 107’ (Kenora) built
entirely with pre-impregnated carbon fiber, fiberglass and Kevlar, on behalf of Wally Yachts.
▪ Project of a 74’ sailing fast cruiser sloop (Paikea): the construction was carried out by a New Zealand
hight-tech boatbuilder.
▪ Preliminary draft a "55’ fast cruising sloop" (Imagine).
▪ Collaboration with SP Technologies UK regarding any lamination detail and the structures of the
above mentioned yachts.
▪ Research on hulls, NACA profile for rudders and keels, bulbs and sailing shapes using VPP
programs (Velocity Prediction Program) also in collaboration with Wolfson Unit Southampton UK
(tank testing).
1998 “Trasporti e Navigazione” Italian Ministry
Obtained the certificate to design (motor and sail) pleasure boats up to 24 meters.
1992 - 1996 Università degli studi di Genova
Yacht Design degree (now Nautical Engineering Degree).
1991 - 1992 Università Cattolica del Sacro Cuore di Milano
Attended the 1st year of the Faculty of Economics and Business.
1986 - 1991 High Schools
San Carlo College (Milano), 1st and 2nd high school.
Rosmini College (Domodossola) until maturity.
Mother tongue Italian
Other languages* UNDERSTANDING SPEAKING WRITING
Listening Reading Spoken interaction Spoken production
English C1 C1 C1 C1 C1
1989, Wagner College, Staten Island, NY USA, intermediate certificate.
Spanish C1 C1 C1 C1 B1
* Minimum knowledge of: French and Russian
Levels:A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user
Common European Framework of Reference for Languages
4. Curriculum Vitae Matteo Vandoni
Page 4 / 4
ADDITIONAL INFORMATION
Communication skills ▪ Good communication skills gained through my experience as manager and team works. Ability to
understand the need of the company and always find the most effective approach.
Organisational/managerial skills ▪ Leadership in design teams and customized and/or industrial production.
▪ Project management from conceptual sketches and drafts up to construction and delivery.
Job-related skills ▪ Good command of quality control processes.
▪ Supervision of production processes.
▪ Management of supplier and customer relations.
Computer skills ▪ Good command of Microsoft Windows (XP, Vista, Windows 7/8) and Microsoft Office tools.
▪ CAD software: Microstation 2D e 3D, Rhino, Autocad, Solidworks (Cosmos, Ansys, etc...).
▪ Naval software: Maxsurf, Hydromax, Hullspeed, Multisurf, Autoship, Hullform.
▪ Graphic software: Photoshop, Illustrator, Corel Draw - Paint Shop Pro.
▪ Publishing software: QuarkXpress, Rastelink.
Other skills ▪ Expert in mechanics and carpentry.
▪ Manufacturing of high tech/composite materials.
▪ Construction of boats and its fitting.
▪ Testing of boats and its onboard systems.
▪ Knowledge of financial costs and benefits.
Licences ▪ Driving licence: CE cat. A+B.
▪ Boat Licence: up to 24 meters, 12 miles limited.
Publications
Projects
Honours and awards
Memberships
Persona Data
More than 100 articles for magazines: Barche a Motore, Giornale della Vela, New Impresa, etc…
Wally 106’, Wally 107’, Alpa 37’, Revolver 42.
"Special Mention" at the 2003 DAME Design Award in Amsterdam.
Lega Navale Italiana, Federazione Italiana Motonautica.
I authorise the handling of my personal data pursuant to the Personal Data Protection Code – Italian
Legislative Decree n. 196/2003.