The curriculum vitae outlines the qualifications and experience of Johnny C. Nanat, a Filipino health and safety officer with over 15 years of experience in various oil and gas projects in the UAE and Philippines, including roles ensuring safety compliance and emergency response. The document lists his educational background in computer science, extensive safety training history, and duties and responsibilities in previous health and safety officer positions.
This document provides a summary of Mike Bartlett's qualifications and experience. He has over 40 years of experience in quality control, engineering inspection, and non-destructive testing. He has worked in various sectors including renewable energy, naval, offshore, power stations, nuclear, and oil and gas. He is a graduate of mechanical engineering and holds certifications in quality assurance and non-destructive testing. His experience includes managing quality control for a valve manufacturer and conducting audits, inspections, and surveys internationally for various projects.
CONSTRUCTION ENVIRONMENTAL MANAGEMENT PLAN
1. Introduction 4
2. Acronym/Abbreviation 5
3. Waste Management Policy 7
4. Definitions 8
5. Scope 9
5.1. Responsibility and Authority 10
5.2. Project Manager 10
5.3. HSE Manager 11
5.4. Construction Manager / Project Engineer 12
5.5. Site Engineer 12
5.6. Site Workers 13
5.7. Individual Employee 13
5.8. Drivers and Operators 14
5.9. Sub-Contractors 14
6. Regulations and Requirements 14
7. Planning of Construction Works 14
7.1. Register of Environmental Aspects and Impacts 14
7.2. Aspect / Impacts Assessments 15
7.3. Environmental Method Statements 15
8. Control of Construction Processes 16
8.1. Training, Awareness and Competence 16
8.2. Supervision of Construction Activities 16
8.3. Control of non-conformance 16
8.4. Communication and Co-ordination 17
8.5. Weekly Team Meetings 17
8.6. Monthly Project Environmental Review 17
9. Monitoring and Audit 17
9.1. Environmental performance Monitoring 17
9.2. Environmental control plan 18
9.3. Air Quality Control Plan 18
9.4. General Mitigation Measures 18
9.5. Dust Management 19
9.6. Gaseous Pollutants Management 20
9.7. Odor Management 20
9.8. Erosion and Sediment Control Plan 21
9.9. Soil & Groundwater Contamination Plan 22
9.10. Terrestrial Ecology Control Plan 23
9.11. Wastewater Management Plan 23
9.12. Noise and Vibration Control Plan 24
10. Pre-construction / Planning Phase 24
10.1. Frequency of Monitoring: 25
11. Traffic Control Plan 25
12. Waste Management Control Plan 25
13. Reporting Requirements 25
13.1. Incident Reporting 25
14. Environmental Hazards and Mitigation 27
15. Records 30
16. Emergency drills 30
APPENDIX A - ENVIRONMENTAL ASPECT AND IMPACTS WITH CONTROL MEASURES 32
Tony Herceg has over 20 years of experience in project management, mechanical installation, and contractor safety management. He has worked on numerous oil and gas, mining, and industrial projects. Herceg holds qualifications in mechanical fitting, process plant operation, project management, and various health and safety certifications. He is seeking a position that utilizes his expertise in project control, contractor management, installation planning, and occupational health and safety.
This curriculum vitae outlines the professional experience of Manuel Ramos de Campos Abreu Bartilotti. He has over 30 years of experience in piping and steel structures construction for various industrial projects. His roles have included pipe fitter, foreman, supervisor, and field engineer. He has worked on projects in Portugal, South Africa, Netherlands, Belgium, Spain, Canada, Qatar, Algeria, and other countries. His responsibilities have included piping fabrication, erection, inspection, planning, and project coordination.
Process Safety Management in Design, Construction & Commissioning | Lalit K...Cairn India Limited
This document discusses process safety management during design, construction, and commissioning of oil and gas facilities. It outlines major hazards in the oil industry such as fires and explosions. It summarizes past disasters like the 1984 San Juanico disaster in Mexico and the 2007 LPG fire at a Texas refinery. The document discusses lessons learned like siting facilities away from housing and having effective gas detection and emergency isolation. It also outlines strategies for inherent, passive, active, and procedural safety. Key aspects of process safety are covered for different project stages from conceptualization to commissioning.
Khalid Khan has over 12 years of experience in HSE roles across various industries. He has worked on large projects up to $10 billion for major companies. His responsibilities included safety audits and inspections, ensuring legal compliance, monitoring risks, and managing safety programs. He is fluent in English, Hindi, and Marathi with skills in Microsoft Office, auditing systems like ISO and OSHAS, and developing safety documents.
A method statement is a document that details how a particular construction task or activity will be carried out safely. It identifies the hazards associated with the work, control measures to mitigate risks, and safe work procedures. Method statements are agreed upon by clients, principal contractors, and contractors for high-risk activities. They specify the stages of work and precautions needed to protect workers and the public. While formats vary, method statements typically describe working systems, access arrangements, stability measures, public protections, required training, and compliance with health and safety regulations.
The document reminds project managers of four health and safety (HSE) principles that must be reinforced: safety starts at the gate, no personal protective equipment (PPE) means no work, everyone is responsible for safety, and management is accountable for everyone's safety. Signs communicating these principles must be posted. Fire drills now will check PPE and record workers without mandatory PPE to report to supervisors. HSE training for construction teams will cover responsibilities, accountability, and consequences for not following safety rules and principles. Project teams must analyze 'Don't Walk By' trends and causes to determine HSE awards.
This document provides a summary of Mike Bartlett's qualifications and experience. He has over 40 years of experience in quality control, engineering inspection, and non-destructive testing. He has worked in various sectors including renewable energy, naval, offshore, power stations, nuclear, and oil and gas. He is a graduate of mechanical engineering and holds certifications in quality assurance and non-destructive testing. His experience includes managing quality control for a valve manufacturer and conducting audits, inspections, and surveys internationally for various projects.
CONSTRUCTION ENVIRONMENTAL MANAGEMENT PLAN
1. Introduction 4
2. Acronym/Abbreviation 5
3. Waste Management Policy 7
4. Definitions 8
5. Scope 9
5.1. Responsibility and Authority 10
5.2. Project Manager 10
5.3. HSE Manager 11
5.4. Construction Manager / Project Engineer 12
5.5. Site Engineer 12
5.6. Site Workers 13
5.7. Individual Employee 13
5.8. Drivers and Operators 14
5.9. Sub-Contractors 14
6. Regulations and Requirements 14
7. Planning of Construction Works 14
7.1. Register of Environmental Aspects and Impacts 14
7.2. Aspect / Impacts Assessments 15
7.3. Environmental Method Statements 15
8. Control of Construction Processes 16
8.1. Training, Awareness and Competence 16
8.2. Supervision of Construction Activities 16
8.3. Control of non-conformance 16
8.4. Communication and Co-ordination 17
8.5. Weekly Team Meetings 17
8.6. Monthly Project Environmental Review 17
9. Monitoring and Audit 17
9.1. Environmental performance Monitoring 17
9.2. Environmental control plan 18
9.3. Air Quality Control Plan 18
9.4. General Mitigation Measures 18
9.5. Dust Management 19
9.6. Gaseous Pollutants Management 20
9.7. Odor Management 20
9.8. Erosion and Sediment Control Plan 21
9.9. Soil & Groundwater Contamination Plan 22
9.10. Terrestrial Ecology Control Plan 23
9.11. Wastewater Management Plan 23
9.12. Noise and Vibration Control Plan 24
10. Pre-construction / Planning Phase 24
10.1. Frequency of Monitoring: 25
11. Traffic Control Plan 25
12. Waste Management Control Plan 25
13. Reporting Requirements 25
13.1. Incident Reporting 25
14. Environmental Hazards and Mitigation 27
15. Records 30
16. Emergency drills 30
APPENDIX A - ENVIRONMENTAL ASPECT AND IMPACTS WITH CONTROL MEASURES 32
Tony Herceg has over 20 years of experience in project management, mechanical installation, and contractor safety management. He has worked on numerous oil and gas, mining, and industrial projects. Herceg holds qualifications in mechanical fitting, process plant operation, project management, and various health and safety certifications. He is seeking a position that utilizes his expertise in project control, contractor management, installation planning, and occupational health and safety.
This curriculum vitae outlines the professional experience of Manuel Ramos de Campos Abreu Bartilotti. He has over 30 years of experience in piping and steel structures construction for various industrial projects. His roles have included pipe fitter, foreman, supervisor, and field engineer. He has worked on projects in Portugal, South Africa, Netherlands, Belgium, Spain, Canada, Qatar, Algeria, and other countries. His responsibilities have included piping fabrication, erection, inspection, planning, and project coordination.
Process Safety Management in Design, Construction & Commissioning | Lalit K...Cairn India Limited
This document discusses process safety management during design, construction, and commissioning of oil and gas facilities. It outlines major hazards in the oil industry such as fires and explosions. It summarizes past disasters like the 1984 San Juanico disaster in Mexico and the 2007 LPG fire at a Texas refinery. The document discusses lessons learned like siting facilities away from housing and having effective gas detection and emergency isolation. It also outlines strategies for inherent, passive, active, and procedural safety. Key aspects of process safety are covered for different project stages from conceptualization to commissioning.
Khalid Khan has over 12 years of experience in HSE roles across various industries. He has worked on large projects up to $10 billion for major companies. His responsibilities included safety audits and inspections, ensuring legal compliance, monitoring risks, and managing safety programs. He is fluent in English, Hindi, and Marathi with skills in Microsoft Office, auditing systems like ISO and OSHAS, and developing safety documents.
A method statement is a document that details how a particular construction task or activity will be carried out safely. It identifies the hazards associated with the work, control measures to mitigate risks, and safe work procedures. Method statements are agreed upon by clients, principal contractors, and contractors for high-risk activities. They specify the stages of work and precautions needed to protect workers and the public. While formats vary, method statements typically describe working systems, access arrangements, stability measures, public protections, required training, and compliance with health and safety regulations.
The document reminds project managers of four health and safety (HSE) principles that must be reinforced: safety starts at the gate, no personal protective equipment (PPE) means no work, everyone is responsible for safety, and management is accountable for everyone's safety. Signs communicating these principles must be posted. Fire drills now will check PPE and record workers without mandatory PPE to report to supervisors. HSE training for construction teams will cover responsibilities, accountability, and consequences for not following safety rules and principles. Project teams must analyze 'Don't Walk By' trends and causes to determine HSE awards.
Dennis Boyle has over 40 years of experience in instrument control systems including hands-on work and project management. He has specialized in DCS and safety systems, working extensively with Honeywell systems. His experience includes roles as a senior engineering consultant, project manager, lead engineer and applications engineer on oil and gas, petrochemical and other industrial projects worldwide. He aims to utilize his engineering, management and consultancy skills to provide competent solutions to clients.
This document contains personal and professional details of Rogelio Padilla Sibbaluca. It includes his name, nationality, date and place of birth, languages, education, certifications, contact details, employment history and responsibilities in various safety engineering roles in Saudi Arabia and the Philippines from 2004 to present. His experience includes implementing safety plans and standards, conducting inspections, investigations, and training, and ensuring compliance with health, safety and environmental regulations.
Kris David Griffith is an experienced Instrument Technician with over 11 years of experience in both onshore chemical plants and offshore oil and gas platforms. He has comprehensive skills in instrumentation, electrical systems, and process engineering. His background includes roles with increasing responsibility, most recently as an Instrument Technician for Petrofac offshore in Liverpool Bay where he performs calibration, maintenance and fault-finding tasks on instrumentation and control systems.
Eric Spencer Ostrom has over 10 years of experience in environmental compliance and hazardous waste management. He currently oversees environmental compliance for over 140 PG&E facilities as an Environmental Program Manager. Previously, he worked as an Environmental Technician for PG&E, managing environmental compliance and hazardous waste operations for 12 facilities. He holds a Bachelor's degree in Architecture and Environmental Design.
Grant J. Thomison has over 20 years of experience as a process safety management engineer and consultant. He has extensive experience developing and implementing PSM programs to ensure compliance with OSHA and EPA regulations. Some of his responsibilities include facilitating pre-startup safety reviews, developing employee training programs, representing plants in companywide safety initiatives, and working to ensure programs exceed all safety requirements. He has worked with numerous companies across various industries, holding positions such as principal engineer, consultant, coordinator, and manager.
2015 – Present INSPECTION COORDINATOR, FLUOR UK
• Fundamentally responsible for overseeing the Tengichevroil SGE / SGR project, monitored inspectors, critically analysed inspection and test plans and reviewed inspection reports.
• Instrumentally accountable for distributing inspection reports among the team, ensured that all certificates and records of inspection were accurate and up to date
• Spearheaded an efficient reporting system, authorised time and expenses sheets, liaised and negotiated with clients, suppliers and internal departments to achieve set results without compromising standards
• Managed key projects from inception to completion in accordance with ROK directives, enforced and adhered to health and safety requirements at all times to ensure the safety of self and others
• Conducted PIM at suppliers to finalise ITP’s.
• Conduct workshop surveys and report findings.
• Conduct inspection visits to many problematic suppliers to ensure equipment is delivered to site in full compliance with approved project requirements.
• Conducted spot checks at suppliers to ensure that inspectors are carrying out their duties in compliance with ITP requirements.
This CV summarizes Nilesh Kajabaje's work experience and qualifications. He has over 10 years of experience in commissioning and mechanical roles. His experience includes commissioning pipelines, vessels, and other process equipment in oil, gas and petrochemical facilities. He is skilled in pre-commissioning activities like leak testing, pump trials and mechanical testing.
DAMMAM SECOND INDUSTRIAL CITY - IPS REHABILITATION WORKSIslam Nassef
Design capacities of the lift station
approximately 1670 m3/h. The
GWC’s initial goal for this project
is to develop a prioritized list of
repair/refurbishment projects based upon a comprehensive condition assessment and criticality analysis of IPS lift station planned to remain in operation.
Gerald Grey is a South African national with extensive experience in health, safety, and emergency response roles in the offshore oil and gas industry. He has over 30 years of experience with companies like Subsea 7, Acergy, and Total working on projects in Angola, Congo, Nigeria, and Sri Lanka. His roles have included country HSE manager, site HSE lead, safety advisor, and emergency response manager. He holds many professional qualifications in areas like firefighting, diving, hazardous materials handling, and incident management.
The document provides a summary of Phillip Lacy's qualifications and experience in safety and environmental roles. It outlines his professional experience over 25 years in various industries, accomplishments reducing incidents and improving safety compliance and programs. It also lists his education in Occupational Safety and Health and various safety certifications.
Phil Hoggett has over 33 years of experience in quality control and technical roles in the oil and gas industry. He has a strong background in quality management, assurance, health and safety, and has led inspection teams on several major projects. Most recently, he worked as an Inspection Coordinator for CB&I UK from 2014-2015, where he oversaw inspection of the Statoil Mariner project and ensured compliance with standards. He has extensive experience managing projects and suppliers across various roles.
Including my job summary, and work history. My direction desired is to be directly volved in impacting therefore improving Energy, Gas & Oil as a Safety Advisor/Inspector.
Inderpaul Singh has 4 years of experience as a QA/QC Inspector for insulation projects. He has worked on several major construction projects in Saudi Arabia, managing site quality and safety. Some of his responsibilities include preparing inspection test plans, ensuring work meets specifications, checking insulation thickness, materials and workmanship. He is skilled in applicable codes and standards, and motivated to work under pressure to meet deadlines.
Peter Scott has over 30 years of experience as an instrument engineer working on projects in the oil and gas industry. He is currently working for ConocoPhillips on a DCS replacement project. Previously he has worked for ABB, Amec, and other engineering companies on projects involving control system upgrades, instrumentation design, and commissioning. He has a background as an instrument technician and holds an HNC in industrial measurement and control.
Anthony Jones has over 30 years of experience in health, safety, and environmental (HSE) management for oil and gas, petrochemical, and chemical projects. He currently works as a Process Safety Principal Consultant on a gas development project in Saudi Arabia. Previously, he held HSE roles on projects in Iraq, Abu Dhabi, Kazakhstan, and other locations. Jones has extensive experience leading HSE studies and workshops. He is a certified lead auditor with qualifications in offshore safety, HSE management systems, and hazardous environments.
This resume summarizes Prabu Kathiresan's experience in commissioning and plant operations roles over 20 years. He has extensive experience in commissioning large petrochemical plants in the Middle East and India. His most recent roles include senior commissioning engineer for Borouge Petrochemicals and Jacobs Engineering. He is proficient in commissioning procedures, safety, and leading teams.
This document is a resume for W.V. "Bill" Powell, an experienced safety professional with over 15 years of experience in the construction industry. It outlines his extensive experience managing safety on large construction projects, including power plants, pharmaceutical facilities, and transmission line projects. It also lists his safety certifications and qualifications. The resume provides details on Powell's work history, roles, responsibilities, and accomplishments on various construction projects for different employers.
Fourteen (14) years of experience as an Engineer Technical Specialist / QA-QC Senior Inspector.
Specialized in Oil & Gas and Automation system: electric, electronic and instrumentation commodities.
Main roles covered: management of various projects starting from Kick Off Meeting to items delivery.
A Competent Mechanical Engineer, seeking middle level assignments in Piping Engineering / Commissioning & Pre-Commissioning with an organisation of repute, preferably in Oil & Gas/ Petrochemicals industry Refinery, Chemical Plants.
This method statement outlines the safe procedure for removing sharp edges from internal pipe welds using abrasive tools prior to applying a fusion bond epoxy coating. It details the roles and responsibilities of the site engineer, worksite supervisor, and HSE engineer in overseeing the work. The process involves an individual manually entering the pipe using a crawler trolley with rubber wheels to grind away sharp edges and spatters within 12 meters of the pipe end using a pneumatic grinder. Personal protective equipment and ventilation will be used, and inspections will verify completion. Safety measures such as training, permitting, and emergency planning are also described.
HSE professional with twelve years plus experience in the construction/manufacturing industry – buildings, infrastructure, pre-cast concrete and fabrication of heavy steel structures/equipment in oil/gas sector with basic qualifications in Electrical engineering and additional qualifications in health safety and environment. Highly pro-active and articulate in communication and possessing excellent leadership, management and persuasive skills to bring about changes in the work culture particularly on health, safety and environmental issues.
Dennis Boyle has over 40 years of experience in instrument control systems including hands-on work and project management. He has specialized in DCS and safety systems, working extensively with Honeywell systems. His experience includes roles as a senior engineering consultant, project manager, lead engineer and applications engineer on oil and gas, petrochemical and other industrial projects worldwide. He aims to utilize his engineering, management and consultancy skills to provide competent solutions to clients.
This document contains personal and professional details of Rogelio Padilla Sibbaluca. It includes his name, nationality, date and place of birth, languages, education, certifications, contact details, employment history and responsibilities in various safety engineering roles in Saudi Arabia and the Philippines from 2004 to present. His experience includes implementing safety plans and standards, conducting inspections, investigations, and training, and ensuring compliance with health, safety and environmental regulations.
Kris David Griffith is an experienced Instrument Technician with over 11 years of experience in both onshore chemical plants and offshore oil and gas platforms. He has comprehensive skills in instrumentation, electrical systems, and process engineering. His background includes roles with increasing responsibility, most recently as an Instrument Technician for Petrofac offshore in Liverpool Bay where he performs calibration, maintenance and fault-finding tasks on instrumentation and control systems.
Eric Spencer Ostrom has over 10 years of experience in environmental compliance and hazardous waste management. He currently oversees environmental compliance for over 140 PG&E facilities as an Environmental Program Manager. Previously, he worked as an Environmental Technician for PG&E, managing environmental compliance and hazardous waste operations for 12 facilities. He holds a Bachelor's degree in Architecture and Environmental Design.
Grant J. Thomison has over 20 years of experience as a process safety management engineer and consultant. He has extensive experience developing and implementing PSM programs to ensure compliance with OSHA and EPA regulations. Some of his responsibilities include facilitating pre-startup safety reviews, developing employee training programs, representing plants in companywide safety initiatives, and working to ensure programs exceed all safety requirements. He has worked with numerous companies across various industries, holding positions such as principal engineer, consultant, coordinator, and manager.
2015 – Present INSPECTION COORDINATOR, FLUOR UK
• Fundamentally responsible for overseeing the Tengichevroil SGE / SGR project, monitored inspectors, critically analysed inspection and test plans and reviewed inspection reports.
• Instrumentally accountable for distributing inspection reports among the team, ensured that all certificates and records of inspection were accurate and up to date
• Spearheaded an efficient reporting system, authorised time and expenses sheets, liaised and negotiated with clients, suppliers and internal departments to achieve set results without compromising standards
• Managed key projects from inception to completion in accordance with ROK directives, enforced and adhered to health and safety requirements at all times to ensure the safety of self and others
• Conducted PIM at suppliers to finalise ITP’s.
• Conduct workshop surveys and report findings.
• Conduct inspection visits to many problematic suppliers to ensure equipment is delivered to site in full compliance with approved project requirements.
• Conducted spot checks at suppliers to ensure that inspectors are carrying out their duties in compliance with ITP requirements.
This CV summarizes Nilesh Kajabaje's work experience and qualifications. He has over 10 years of experience in commissioning and mechanical roles. His experience includes commissioning pipelines, vessels, and other process equipment in oil, gas and petrochemical facilities. He is skilled in pre-commissioning activities like leak testing, pump trials and mechanical testing.
DAMMAM SECOND INDUSTRIAL CITY - IPS REHABILITATION WORKSIslam Nassef
Design capacities of the lift station
approximately 1670 m3/h. The
GWC’s initial goal for this project
is to develop a prioritized list of
repair/refurbishment projects based upon a comprehensive condition assessment and criticality analysis of IPS lift station planned to remain in operation.
Gerald Grey is a South African national with extensive experience in health, safety, and emergency response roles in the offshore oil and gas industry. He has over 30 years of experience with companies like Subsea 7, Acergy, and Total working on projects in Angola, Congo, Nigeria, and Sri Lanka. His roles have included country HSE manager, site HSE lead, safety advisor, and emergency response manager. He holds many professional qualifications in areas like firefighting, diving, hazardous materials handling, and incident management.
The document provides a summary of Phillip Lacy's qualifications and experience in safety and environmental roles. It outlines his professional experience over 25 years in various industries, accomplishments reducing incidents and improving safety compliance and programs. It also lists his education in Occupational Safety and Health and various safety certifications.
Phil Hoggett has over 33 years of experience in quality control and technical roles in the oil and gas industry. He has a strong background in quality management, assurance, health and safety, and has led inspection teams on several major projects. Most recently, he worked as an Inspection Coordinator for CB&I UK from 2014-2015, where he oversaw inspection of the Statoil Mariner project and ensured compliance with standards. He has extensive experience managing projects and suppliers across various roles.
Including my job summary, and work history. My direction desired is to be directly volved in impacting therefore improving Energy, Gas & Oil as a Safety Advisor/Inspector.
Inderpaul Singh has 4 years of experience as a QA/QC Inspector for insulation projects. He has worked on several major construction projects in Saudi Arabia, managing site quality and safety. Some of his responsibilities include preparing inspection test plans, ensuring work meets specifications, checking insulation thickness, materials and workmanship. He is skilled in applicable codes and standards, and motivated to work under pressure to meet deadlines.
Peter Scott has over 30 years of experience as an instrument engineer working on projects in the oil and gas industry. He is currently working for ConocoPhillips on a DCS replacement project. Previously he has worked for ABB, Amec, and other engineering companies on projects involving control system upgrades, instrumentation design, and commissioning. He has a background as an instrument technician and holds an HNC in industrial measurement and control.
Anthony Jones has over 30 years of experience in health, safety, and environmental (HSE) management for oil and gas, petrochemical, and chemical projects. He currently works as a Process Safety Principal Consultant on a gas development project in Saudi Arabia. Previously, he held HSE roles on projects in Iraq, Abu Dhabi, Kazakhstan, and other locations. Jones has extensive experience leading HSE studies and workshops. He is a certified lead auditor with qualifications in offshore safety, HSE management systems, and hazardous environments.
This resume summarizes Prabu Kathiresan's experience in commissioning and plant operations roles over 20 years. He has extensive experience in commissioning large petrochemical plants in the Middle East and India. His most recent roles include senior commissioning engineer for Borouge Petrochemicals and Jacobs Engineering. He is proficient in commissioning procedures, safety, and leading teams.
This document is a resume for W.V. "Bill" Powell, an experienced safety professional with over 15 years of experience in the construction industry. It outlines his extensive experience managing safety on large construction projects, including power plants, pharmaceutical facilities, and transmission line projects. It also lists his safety certifications and qualifications. The resume provides details on Powell's work history, roles, responsibilities, and accomplishments on various construction projects for different employers.
Fourteen (14) years of experience as an Engineer Technical Specialist / QA-QC Senior Inspector.
Specialized in Oil & Gas and Automation system: electric, electronic and instrumentation commodities.
Main roles covered: management of various projects starting from Kick Off Meeting to items delivery.
A Competent Mechanical Engineer, seeking middle level assignments in Piping Engineering / Commissioning & Pre-Commissioning with an organisation of repute, preferably in Oil & Gas/ Petrochemicals industry Refinery, Chemical Plants.
This method statement outlines the safe procedure for removing sharp edges from internal pipe welds using abrasive tools prior to applying a fusion bond epoxy coating. It details the roles and responsibilities of the site engineer, worksite supervisor, and HSE engineer in overseeing the work. The process involves an individual manually entering the pipe using a crawler trolley with rubber wheels to grind away sharp edges and spatters within 12 meters of the pipe end using a pneumatic grinder. Personal protective equipment and ventilation will be used, and inspections will verify completion. Safety measures such as training, permitting, and emergency planning are also described.
HSE professional with twelve years plus experience in the construction/manufacturing industry – buildings, infrastructure, pre-cast concrete and fabrication of heavy steel structures/equipment in oil/gas sector with basic qualifications in Electrical engineering and additional qualifications in health safety and environment. Highly pro-active and articulate in communication and possessing excellent leadership, management and persuasive skills to bring about changes in the work culture particularly on health, safety and environmental issues.
The document is a curriculum vitae for a position of Safety Coordinator and Confined Space Assessor. It details the applicant's work experience over 15 years in safety roles on construction projects in Singapore. Responsibilities included conducting inspections, ensuring permits, monitoring safety compliance, and assessing confined spaces. Employers included developers, contractors, and companies in industries like oil and gas, utilities, and transportation.
Reda Abd El-Mohsen Soker is seeking a manager/advisor role in health and safety. He has 12 years of experience in health, safety, and environment roles. He graduated from Alexandria University in 2003 and holds numerous safety certificates including NEBOSH, OHSAS 18001 Lead Auditor, and first aid. His experience includes roles at various companies where he coordinated health and safety plans, audits, training and emergency response.
Syed Tahir Shah has over 10 years of experience as an HSE Engineer, with qualifications including a NEBOSH International Diploma in Occupational Safety & Health. He has worked on numerous construction and industrial projects in Abu Dhabi, with responsibilities like developing HSE programs, conducting safety trainings and inspections, and investigating incidents to prevent future occurrences. His experience is mainly in the construction, oil & gas, and industrial sectors.
This document is a curriculum vitae for Mohamed Abu EL Enin, an Egyptian national seeking a position as an Oil & Gas Construction Manager. It outlines his 33 years of experience in offshore construction, installation, and maintenance of oil and gas projects in both onshore and offshore facilities. His most recent role from 2013 to present has been as the Construction Team Leader for the SARB project for ADMA-OPCO, where he has led fabrication, installation, and hookup activities on offshore islands. The CV details his responsibilities and qualifications, including extensive safety and technical training.
This document contains a career profile for Raymond Berzabal. It includes his career objective, personal details, education history, and professional experience. Berzabal has over 15 years of experience in safety engineering and inspection roles for various construction and oil/gas companies. His most recent role is as a Safety Engineer for JORABWAN BUILDERS INC. where he is responsible for site safety supervision, monitoring, and reporting.
Ahmed Ghoneim is an Egyptian-Australian corporate ES&H manager with over 16 years of experience. He holds a B.Sc. in mechanical engineering and has extensive training in areas such as safety management, gas monitoring, and accident investigation. Ghoneim currently works as the corporate ES&H manager for Power Generation and Engineering Services Company, where he coordinates ES&H activities across multiple projects and provides oversight of contractors' safety plans and training programs. Previously, he held ES&H roles in Oman, Egypt, Australia, the UK, and Zambia for companies involved in construction, power generation, and water infrastructure.
The resume summarizes Walid Mohamed Zakaria El-koweidy's experience as a health and safety manager spanning over 28 years working on various construction projects in oil, gas, power, and other industries. He has extensive experience developing and implementing health, safety, and environmental management systems and plans. His roles have included advising management, conducting audits and inspections, investigating incidents, and providing safety training.
Khaled Ahmed is an Egyptian national with over 22 years of experience in health, safety, and environmental management. He holds a B.A. in Archaeology from Alexandria University and numerous safety certifications. His experience includes serving as Project HSE Manager for large construction projects in Egypt and Qatar, including a convention center and tower project in Doha and a new city development in Egypt. He is currently leading HSE management on a mega project to develop the largest artificial lake in the world.
More than 17 years of professional experience in the implementation & monitoring of Health, Safety and Environment management system and procedures as per OHSAS18001 and ISO 14001requirements. J3.Project Reliance Refinery Jamnagar (Gujarat) Pipe rack, LIN & LOX Tank. S.S Spool , U.G Pipe line. DIL 2X300 MW Power Project Chandrapur (Chimeney 275 m height , cooling tower, T.G, Boiler etc). AL Munnera, AL Raha project Abudhabi , UAE (Construction of Multistoried buildings, Circular Residential Towers, Town houses & Villas). DUBAL, DX. Technology Development Project (Bus bar, Pot line) Dubai (UAE). Emirates Aluminum smelter complex Project, (Cast House) Abudhabi. DUBAI FESTIVAL CITY (High rise Building, Shopping Mall, tunnel, Culvert etc.). BPCL Refinery India CRUDE DISTILLATION & VACUUM DISTILLATION UNIT HEAT EXCHANGER, SRU, LPG & FIRE WATER VALVE SYST.Lafarge cement Plant. Fabrication, Erection & Maintenance of all TATA STEEL PLANTS, i.e. G.C.P, Gas holder, Hot strip mill, Cold rolling Mill wire and Rod mill & Power Plant. Power plant Maintenance work.
Khaled Ahmed is a Project HSE Manager with over 22 years of experience in health, safety, and environmental roles. He holds numerous safety certificates and has managed HSE programs on large projects in Egypt and Qatar, including serving as HSE Manager for a megaproject in Sharm El Sheikh constructing the largest artificial lake in the world. His responsibilities have included implementing safety programs, conducting inspections and investigations, training workers, and ensuring compliance with regulations.
Gabriel Edeaghe Onosabuna is a safety officer seeking a career opportunity. He has over 15 years of experience in health, safety, and environment roles for oil and gas companies. He has a higher national diploma in petroleum engineering and various safety certifications. Gabriel seeks to utilize his skills to promote organizational growth while achieving career excellence.
The document provides a resume for Saif Al-Shadfan seeking a position as a Safety Professional. It details his education in chemical engineering and project management as well as extensive experience over 10 years in health, safety, and environment roles on large industrial projects in Qatar, including his current role as Deputy HSE Manager on a refinery project. The resume also lists safety training and workshops he has completed relevant to the role.
Noel Mago is a Filipino mechanical engineer with over 25 years of experience in piping engineering roles. He currently works as a piping field engineer for Bechtel in Tanggu, China. Previously he held positions as a piping superintendent, assistant piping superintendent, and start-up engineer in the Middle East and China. He has a bachelor's degree in mechanical engineering and is a member of the Philippines Society of Mechanical Engineers.
Rajeev Daniel has over 13 years of experience as a Safety Engineer working in oil, gas, and construction projects in Saudi Arabia, the UAE, and India. He holds several safety certifications including NEBOSH and specialized training in areas such as confined space entry, hazardous operations, and first aid. Currently he works as a Safety Foreman for an ADNOC group company in the UAE, overseeing safety practices and compliance. Prior projects include work with Saudi Aramco, ExxonMobil, and McDermott International.
I am Mr. Sony, HSE Manager having working experience more than 23 years. M.Tech In Electrical, NEBOSH IGC, NEBOSH Oil & Gas, Train The Trainer, Diploma in Fire & Safety, Diploma in Industrial safety, Basic First Aider, Lead Auditor. Experience in Watar & Waste water projects, High Rise buildings, Metro Rail project, Dubai, Soil wall & Petrochemicals , Large infrastructure projects of Dubai & Qatar governments etc. I have working experience with ASHGHAL, Public work authority, Qatar also. Can join immediately with NOC.
This document is a 5 page curriculum vitae for Sharin Babu, who has over 12 years of experience in health, safety, and environment roles. It provides details on her educational qualifications including NEBOSH and IOSH certifications, as well as numerous safety trainings. The CV outlines her current role as an HSE Coordinator for offshore projects in Abu Dhabi and highlights safety responsibilities like advising on HSE standards, conducting audits and inspections, organizing training, and ensuring compliance. Previous experience includes roles as an HSE Engineer and HSE Inspector for construction companies in Abu Dhabi.
Manikandan Manodhas is a Senior Safety Engineer currently working for Tebodin Middle East supplying to ADCO in Abu Dhabi. He has over 15 years of experience in health, safety and environmental roles in oil and gas projects. His experience includes regional HSE management, contractor management, incident investigation, audit and inspection, training, and emergency response. He holds professional certifications in project management and safety and is fluent in several languages including English, Hindi, Malayalam, Tamil, Urdu and Arabic.
More than 11 years of professional experience in the implementation & monitoring of Health, Safety and Environment management system and procedures as per OHSAS18001 and ISO 14001 requirements.
1. CURRECULUM VITAE
NAME: JOHNNY C. NANAT
NATIONALITY: Filipino
DATE OF BIRTH: November 17, 1972
MARITAL STATUS: Married
LANGUAGES: Filipino and English
CONTACT NO. +639494225776 / +63 02 9036025
QUALIFICATIONS
BSC Computer Science 1990 College De Dagupan, Philippines
COURSES & SEMINARS
Occupational Safety and Health Administration (OSHA) HFGR HSE Training Center
Date June 26, 2011
Incident/Accident Investigation Training (CCIC) HFGR HSE Training Center Date
June 26, 2011
Risk Assessment Awareness for HSE Officers (CCIC) HFGR HSE Training Center Date
June 19,2011
Confined Space Entry Training - (CCIC) HFGR HSE Training Center
Date July 30,2011
Scaffolding Awareness – (CCIC) HFGR HSE TRAINING CENTER Date
May 29,2011
Job Safety Task Instruction Training (CCIC) HFGR HSE Training Center Date
June 28,2011
Institution of Occupational Safety and Health (IOSH) TWI Gulf WLL Dubai UAE
Date February 06,2009
Crane safety & Crane Safe Inspection Dutest Industrial East, Emirates Test House,
Dubai UAE Date January 18,2008
First Aid CPR Training CICC – RNGL 3 Project Ruwais UAE
Date June 23,2008
. Supervisory Specific Training OSHO CENTRE CICC Camp Ruwais UAE Date
February 04,2008
Heat Stress - Snamprogetti Ruwais Site Abu Dhabi UAE Date April,06 2008
Crisis and Emergency Management Plan - Snamprogetti Ruwais Site Abu Dhabi UAE
Date April,06 2008
Self-Contained Breathing Apparatus Snamprogetti Ruwais Site Abu Dhabi UAE Date
September 25,2008
Hydrogen Sulfide (H2S) Snamprogetti Ruwais Site Abu Dhabi UAE
Date March 16,2009
2. Certificate of Appreciation Given by Gasco Management Ruwais Head Office UAE Date
18,2008
Basic Occupational Safety and Heath by RODECHTraining Services Link Intl Inc.
Makati City, Philippines Date April 10,2006
Comprehensive Training Program for Oil and gas (Drilling Technology) by RODECH
Training Services Link Intl Inc. Makati City, Philippines Date April 20,2006
Standard First Aid, CPR and AID Conducted by RODECHTraining Services Link Intl Inc.
Makati City, Philippines Date 27,2006
Construction Safety Training for Site Safety Officer Conducted by DOLE – Occupational
Safety & Health Center November 13,2003
CCC GROUP EXPERIENCE
United Arab Emirates
June 2014 – February 2015
Current Project Bab Gas Compression Project (BHOG)
Scope of Work Construction of Utility buildings such as the
New main intake substation (33KV), local technical room
And main gas control room and three compressor stations
Help in maintaining reservoir pressure and increasing the
Reinjection capacity of the plan
Client: - Abu Dhabi Company for Onshore Oil Operation
(ADCO)
Title HSE OFFICER
Duties
Ensure PTW is in the work area and Method of
Statement will be strictly followed.
Ensure a Tool Box Talk will be conducted prior to
commence a work
Daily safety surveillance of the area assigned at work
site
Consult the (JP) Job Performer that the potential
hazard should be identified prior to start any activity
Record observations and report to Sr. Safety Officer /
Engineer.
Monitoring compliance with safety regulations in
construction activities
3. Recommend disciplinary actions against violators of
site safety regulations
Daily activity reporting and coordinate with all
construction engineers for all work required to be done
safely
Participate in safety walk with site supervisors for the
designated area
Respond to requests of safety related issues as per
instructions of Sr. Safety Officer
Conduct gas testing for confined space work prior to
commence a work
Weekly audit for all the plant construction activities by
CCC
Participate in safety walks with the clients. Assist in
Preparation of accident / incident investigation reports.
Assist in conducting monthly Emergency
Evacuation/Rescue Drills
Attend internal HSE Meetings.
Routine inspection of firefighting equipment’s and
reporting
Site inspection and reporting to safety supervisor
November, 2012 - February 2014
Project Borouge EU III Project (BEU3)
Scope of Work: 1,500 KTA Ethylene Unit (EU3) (Steam
Cracker) based on ethane feedstock to produce polymer
grade ethylene, propylene and hydrogen.
Client: Borouge – Abu Dhabi Polymers Company Limited
Title HSE OFFICER
Pre-Com. Stage / Commissioning Stage/ maintenance
Duties Safety In Charge / Pre. Commissioning Stage
Chemical cleaning
4. Water Flushing
Lube Oil Flushing
Test Run of Pump
Solo Run of Turbine and Compressor
Vessel Box up
Hydro Test
Final Reinstatement
Air Blowing/Steam Blowing
Ensure project HSE’s minimum required PPE is
mandatory for all personnel involved in the
execution of the activity
Ensure hearing protection for all personnel
involved in air blowing / steam blowing activity
and also for other working groups that are near
the blowing point
Ensure all blowing point should be barricaded to
prevent access of the other working groups
during steam and air blowing
Ensure safety signs should be displayed on the
perimeter of blowing points
Before Steam and Air blowing make sure warning
sound signal horn sound is activated before start
Ensure that whiplash arrester must be provided
for all air and steam hose connection
Ensure all equipment near the blowing point are
secured
Continuous monitoring the area to prevent worker
passing from the blow point
Measure the sound by sound level meter to avoid
excessive
Duties Safety in Charge / Commissioning Stage
Start Up Of Boiler
Start Up Of Furnace
Start Up of Turbine and Compressor
Chemical Dosing
System Dying
5. Demine Water Line Up
VHP/HP/MP Steam Line up
Natural Gas Line up
Start Up of Boiler Fed Water Pump
Fuel Gas Line Up
Refractory Dry Out
Close monitoring of all activities ensuring that all
permits requirements has been followed
Confirming that all hazards associated with the work
have been identified
Monitor activities as indicated in the permit, the scope
of the work and the activity description
Informing all people who may be affected by the work
Coordinate with other contractor and neighboring
activities in order to avoid risk caused by simultaneous
activity
Ensure all staff involved has an overview of significant
ongoing work
Daily attending a management meeting regarding
safety issues on site
Active member of Site Safety and Environment
Support (SSES)
Also responsible for supervision and implementation of
HSE procedures of the project.
October 2010 – May 2012
Habshan Flare Gas Recovery (HFGR)
Scope: Plant facilities under the Habshan Flare Gas
Recovery (HFGR). Project Package No. 5245, to be
designed, engineered, constructed, commissioned and
tested at the Habshan Plant
Client: GASCO
Title HSE OFFICER
6. Duties
Ensure PTW is in the work area and Method of
Statement will be strictly followed.
Ensure a Tool Box Talk will be conducted prior to
commence a work
Daily safety surveillance of the area assigned at work
site
Consult the Person In charge in the Work Site (PICWS)
that the potential hazard should be identified
Monitoring compliance with safety regulations in
construction activities
Recommend disciplinary actions against violators of
site safety regulations
Daily activity reporting and coordinate with all
construction engineers for all work required to be done
safely
Participate in safety walk with site supervisors for the
designated area
Respond to requests of safety related issues as per
instructions of Sr. Safety Officer
Conduct gas testing for confined space work prior to
commence a work
Weekly audit for all the plant construction activities by
CCC
Participate in safety walks with the clients. Assist in
Preparation of accident / incident investigation reports.
Assist in conducting monthly Emergency
Evacuation/Rescue Drills
Respond to all emergencies on site, fire, gas leak
alarm, etc.
Attend internal HSE Meetings.
Routine inspection of firefighting equipment’s and
reporting
7. Site inspection and reporting to safety supervisor
June 2008 – August 2010
Project Borouge - EPC Works for the Ethylene Cracker 2 (EU 2)
Project-UAE (BEC2)
Scope: An Ethylene Plant using 5100T/D (as 100%)
ethane feedstock, operating with a 95% nominal service
factor and producing 1.44 mm t/yr of ethylene, propylene
& hydrogen. The plant consists mainly of the following:
1-The furnaces area compression unit3.The refrigeration
unit.3 the separation unit.
Client: Borouge-Abu Dhabi Polymers Company Limited
Title HSE OFFICER – Pre Commissioning/Commissioning
Duties (Same Duties in BEU3)
November 2006 – June 2008
Project: Ruwais NGL Train 3 Projects (RT3)
Scope: CCC scope comprises of EPC building works,
construction of civil, mechanical & E/I works for all the
project excluding marine works, jetty & cryogenic tanks.
New fractionation/refrigeration unit, stream plant,
utilities, new LPG & deck treating, amine regeneration,
sulfur recovery unit, sour water stripper unit, future
naphtha hydro theater,& future hydrogen manufacturing
unit. CCC scope comprises of the civil, mechanical &
E/I.
Client: GASCO
8. Title HSE OFFICER
Duties
Daily safety surveillance of the area assigned at work
site
Safety implementation on construction and
maintenance of CCIC
Monitor employee exposure to physical/chemical
hazards and recommend controls
Conduct incident investigations and root cause
analysis and recommending measures to prevent
incident reoccurrence
Ensuring that fire and safety equipment is maintained
at company facilities
Works with the crews to improve safety standards and
practices by participating in tool-box
Talks, risk assessments, inspections, audit and sets
personal example
Observe and check project documentation regarding
method of statement and job safety analysis
Coordinates with the project coordinator for the proper
implementation of work permits such as LOTO,
Confined space entry, Hot work and Cold work etc.
Inspection the scaffoldings and see to it that safety
tags are installed before use
See to it that the proper good housekeeping is being
followed at the workplace
Provided a safety precautions such as barricades,
signage, and placards for the hazardous area
Safety supervision and inspection on the following
activities:
Installation of new control panel
Cable tray and conducting works
Cable pulling and termination of cable
Installation of new instruments
Installation of new impulse piping for new
instruments
Lightings and paging’s system installation
Strictly enforce productivity, quality and safety
9. October 2003 – March 2005
Project San Lorenzo 500 MW Combine Cycle Gas Turbine
Project
Sta. Rita, Batangas City, Philippines
Client Siemens Power Operation, Inc.
Title HSE OFFICER
Duties
Conduct toolbox meeting/s prior to the work
Conduct toolbox meeting/s prior to the work
Routine inspections on the project prior to the work,
and to the workers
Make written reports on the day’s work
Conduct accident investigation if any
Conduct safety trainings and seminars on the workers
Coordinate regularly with management regarding the
implementation of safety programs of the company
PROFILE:
Age : 42 yrs. old
Birth Date : 17 November, 1972
Height : 5’6” (169 cm)
Weight : 145lbs
Status : Married
Nationality : Filipino
Passport# : EB2847309
Personal References: (Available upon request)