CP600 training presentation_rev2.pptx

© ABB Group
For internal use only ! Slide 1
New Control Panels CP600
Introduction

New HMI Panels
CP600 range – Summary
 Hardware presentation
 Software PB610 – General presentation
 Installation
 Overview of functions
 Software demonstration
 Documents

© ABB Group
New HMI Panels
CP600 Technical features
CP620
CP620-WEB
CP630
CP630-WEB
CP635
CP635-WEB
CP650
CP650-WEB
CP660
CP660-WEB
CP675
CP675-WEB
Size in inch
resolution
4,3“
480 x 272
5,7“
320 X 240
7“
800 x 480
10,4“
800 x 600
12,1“
800 x 600
15“
1024 x 768
Dimensions
(L x H x D) in
mm
149 x 109 x 60 187 x 147 x 49 187 x 147 x 49 287 x 232 x 46 337 x 267 x 46 392 x 307 x 51
Cut out in
mm
136 x 96 176 x 136 176 x 136 276 x 221 326 x 256 381 x 296
CP6xx Windows CE 6.0 with runtime licence for PB610 Panel Builder 600
CP6xx-WEB Windows CE 6.0 with microbrowser for PS501 WebVisu
Backlight LED LED LED LED CCFL CCFL
Interfaces 2x ETH, 1x USB,
1x ser.
1x Exp
2x ETH, 1x USB,
1x ser.
2x Exp
2x ETH, 1x USB,
1x ser.
2x Exp
1x ETH, 1x USB,
2x ser.
1x Aux
1x ETH, 1x USB,
2x ser.
1x Aux
1x ETH, 1x USB,
2x ser.
1x Aux
Card slots SD card SD card SD card
User mem.
RAM
128MB FlaDsk
256 MB DDR

© ABB Group
HMI Panels CP600
2 versions available
Runtime license version
with PB610 software
Web version with
microbrowser for PS501
WebVisu
CP6xx
CP6xx-WEB
Webinar Week 48
Webinar Week 40

© ABB Group
HMI Panels CP600
PB610 Panel Builder 600
 Based on XML technology
 Easy to use
 Easy to configure
 SVG vector graphic
 Dynamic object properties
 Perfect Fit for Embedded platforms
 High performance and quality engine
 Open System
 Flexible, Modular, Scalable
 Customizable
 Expandable

HMI Panels CP600
CP600 cables, drivers, approvals and certifications
 Cables:
 CP6xx – AC500: RS232 cable
 CP6xx – AC500(-eCo): RS485 cable
 Drivers:
 Modbus TCP
 Modbus RTU
 Variables (CoDeSys ETH)
 ABB CoDeSys ETH
 ABB CoDeSys SER *
 ABB AC500-eCo / ABB AC500-eCo Ethernet
 ABB PM57x / ABB PM571-ETH
 ABB PM59x, PM58x / PM59x-ETH, PM58x-ETH, PM573-ETH
* in preparation
*

New HMI Panels
CP600 range – PB610 – Installation & Run
• Software Installation (USB stick support)
• Includes the Runtime for all CP600 panel types
• Includes Windows Client
• You can run the PB610 Panel Builder 600 by using several options:
1) Desktop icon or 2) from Start/programs/ABB/Panel Builder 600 suite

New HMI Panels
CP600 range – PB610 – Run from CBP
• You can run the Panel Builder 600 project also directly
from PS501 Control Builder Plus. Since V2.1

© ABB Group
HMI Panels CP600
Panel Builder 600 Studio

PB610 Panel Builder
Create a New Project
 New Project Wizard
 FileNew
 Name
 Location of project files
 Panel model selection
 Screen model can be changed later
© 2010 Sitek S.p.A, An Exor International Inc. Partner Company
All rights reserved 15

PB610 Panel Builder
Configuring Protocols
 Open Protocol Editor from Project Tree View:
 Add a communication driver
 Click on “+”
 Select from the list
 Configure the driver
 Support Multiple
Protocols

PB610 Panel Builder
Adding Tags
 Open the Tag Editor from Project Tree View:
 Define or Import Tags
 Name, driver, address and rate
 How fast the tag is retrieved
 Protection R/W of tag in database
 Scaling
 Store scaled values

PB610 Panel Builder
Working with Widgets
 Widgets
 HMI Objects
 Special widgets
 Widgets Gallery
 objects for programming
 Accessible from slide-in pane
 Categories
 The Widget toolbar
 Drag and Drop
 Change Properties

PB610 Panel Builder
Objects’ Properties
 Static
 Change from Page toolbar
 Dynamic
 From Property Pane
 Attach to Tag
 Scripting
 Interconnection between objects’ properties

PB610 Panel Builder
Property Pane
 On the right side (Slide-in)
 Shows Properties of
selected Object
 Simple and Advanced View
 Allows “Attach To”
 Configure “Events”

PB610 Panel Builder
Attach to tag (1)
 Provide the way for attaching properties to Tag
 Source selection
 Tag
 System
 Widget
 Recipe

PB610 Panel Builder
Attach to tag (2)
 Applying transformations

PB610 Panel Builder
Events
 Events are available for:
 Fields
 On Data Update
 Called when field Properties are updated by attached Tag
 Buttons
 On Press
 On Release
 On Data Update
 Page
 On Activate
 On De-Activate
 On Data Update
 Called when any widget on page is updated by a Tag attached to it
 Alarms’s events
 Scheduler’s events

PB610 Panel Builder
Action Lists (Macro & Script)
 Actions are executed when an Event is Triggered
 List of Predefined available Actions
 Custom Action with scripting
 Support for Multiple
actions

PB610 Panel Builder
Productivity tools
 Page toolbar
 Zoom and Pane
 Group & UnGroup
 Rotate
 Z order
 Align
 Size to fit
 Adjust size
 Space evenly
 Quick change of objects’ property

PB610 Panel Builder
Custom Widgets (1)
 Combine widgets
 Allows to create customized objects
 Allows to specify the exposed properties
 Group the objects
 Select “Convert to Widget”

PB610 Panel Builder
Custom Widgets (2)
 Select the Widget Type
 Select “Custom” if not in the list of standard objects
 Decide which properties of the group will be exposed

PB610 Panel Builder
Custom Widgets (3)
 The Custom widget can be used as “monolitic” object
 The properties are the ones selected
 Support for saving to gallery in preparation

PB610 Panel Builder
Object List
 Accessible
 from slide in pane from the left side
 Map of the objects in page
 Shows tree
 view of object composition
 Locate Objects:
 From map to page and
vice-versa

PB610 Panel Builder
Using Page Templates
 Constant elements for pages
 Header and Footer
 Right click on Page Templates
 Insert Page Template
 Several templates can be defined
 Click on page
 Locate “Template” property
 Assign the template
 Different pages can have
different templates

PB610 Panel Builder
Customizing Keypads
 Data entry keypads can be fully customized
 Support for alphabet keypads in different languages

PB610 Panel Builder
Transfer project to target
 Use the Run menu commands
 RunDownload to Target...
 Select the target device from the list
 Click Download
 Upload
 From Manage Target

PB610 Panel Builder
Manage Target - Runtime
 Manage Target dialog
 Accessible from Run menu
 Get list of projects in the target
 Load/Unload Project
 Delete projects

PB610 Panel Builder
System Properties
 Special Tags providing System informations
 Communication Status
 Data copy status
 Dump to USB disk
 Device Info
 Network info
 Alarms’ info

PB610 Panel Builder
Communication Diagnostic
 Communication LED
Fixed: no errors - Blinking: Error(s)
 System Variables
 Status: 0: no protocol running
1: no errors
2: error(s) )
 Error Message
String with last error description
Depends on protocol
 Error Count:
Number of errors - Can be reset with macro
“ResetProtoErrCounter”

PB610 Panel Builder
Driver’s Documentation
 Technical note with basic information to setup communication
 List of Communication Error Messages returned by the Protocols
 Cable diagram (when needed)
 Integrated in the on-line help
36

PB610 Panel Builder
Alarms/Events and Alarm History
 Alarms and Events concept
 Configuring Alarms
 Triggers
 Actions
 Alarm historical list
 Buffers
 Visualization of alarm history
 Dumping Alarms and Events
 Live Tag values in alarm description
 Alarms can be enabled/disable at runtime

PB610 Panel Builder
Trigger Conditions
 Bit mask
 Bit status withing the tag
 Limits
 Triggered is out of “safe” zone
 Deviation
 Percentage deviation of tag value
from set point

 Configuring one alarm
 Alarm widget
 Events viewer
 Open Alarm editor from Project tree
 Give a name to the alarm
 Enable the alarm
 Configure Ackowledge
 Set monitored Tag
 Decide where log is stored
PB610 Panel Builder
Working with Alarms (1)

PB610 Panel Builder
 Configure Actions to be executed when trigger occurs

PB610 Panel Builder
 Configuring Alarm behavior
 Decide when widget is updated
 Decide when the alarm state change is logged
 Decide when the alarms action is executed

PB610 Panel Builder
 Configuring the alarm widget
 From widget gallery
 Advanced category
 Widgets for alarm visualization
 Widget for Event buffer visualization

PB610 Panel Builder
 Use of the display Filter
 Runtime options
 Default sorting
 No runtime change

PB610 Panel Builder
Recipes
 Working with recipes
 Configuring recipes
 Recipe, Element, Set
 Storing recipes data
 Recipe data files
 Extracting data
 FTP
 Backup and Restore to USB
 Handling recipes
 Menu selection
 Download/Upload

PB610 Panel Builder
Working with Recipes (1)
 Configuring one recipe
 Using the standard widget for recipe operation
 Right click on “Recipe” to insert a new element
 Double click on Recipe name to open the recipe editor
 Configure Elements and Sets

PB610 Panel Builder
Working with Recipes (2)
 Locate the recipe widget in gallery
 AdvancedRecipe Source
 Drag & Drop the widget on page
 Configure the widget
 Assign the recipe from “Recipe Name”

PB610 Panel Builder
Trend
 Configuring trend buffers
 Sampling conditions: Time, Trigger
 Boundaries
 Mechanism to save space in memory
 Historical trend
 Trend files
 Each buffer has its own file on disk
 Viewing trends
 Extracting data: FTP, Dump to USB
 Real time trends
 No data storing

PB610 Panel Builder
Working with Trends (1)
 Configuring a trend buffer
 Trend viewer
 Configuring action for dump
 Open the trend editor
 Add a trend buffer

PB610 Panel Builder
 Configure buffer options
 Source: Tag to be sampled
 Size: Size of the buffer in number of samples
 Trigger
 Blank: disabled
 Tagx: allows to sample “on event”
 Low and High Limits (boundaries)
 The sample is stored if
 (current value – previous value) < Low Limit
 (current value – previous value) > High Limit

PB610 Panel Builder
Boundaries Concept
V1
V0
V1 – V0 > High
t t+1
V2
V3
V3 – V2 < Low
s s+1

PB610 Panel Builder
 Locate the Trend viewer in gallery
 Drag & Drop it on the page
 Configure the viewer
 Scale X and Y, Grid and Curve

PB610 Panel Builder
 History viewers
 Requires refresh!!

PB610 Panel Builder
 Configure the action to dump data
 Data is exported in binary format
 CSV Export in preparation
 Requires conversion to CSV

PB610 Panel Builder
 External utility to decode the data
 trendEdit.exe
 Batch file
 trendedit -r TRENDTrend1 csvTrend1.csv 1
 Format of exported file
 DataType,Value,Timestamp(UTC),SamplingTime(ms),
Quality

PB610 Panel Builder
Working with Trend (7)
 Use System Variable to show
dump operation status
 Status for operation shorter
than 1 sec is not updated

PB610 Panel Builder
Multilanguage
 Support for multiple languages
 Add languages to the project and defining writing system
 Each string can have its own font
 Depending on selected language Studio shows fonts
compatible with selected writing system
 Required fonts are downloaded with project
 Export/Import of Language Strings
 Changing language at run time

PB610 Panel Builder
Working with Languages (1)
 Create a project for English and Chinese
 Double click on “Multilanguage” to start
the Language editor
 Click “Add” to add a new language
 Give a name
 Define the “writing system”

PB610 Panel Builder
Working with Languages (2)
 Type text directly
 Double click to enter edit mode
for labels, select the language
and format for the text
 Use the Text Table
 Export/Import
 Text tab and List of all strings
 Export:
Generates Unicode CSV,
required CSV editor
with Unicode support

PB610 Panel Builder
Security Options
 User management
 Groups with set of authorizations
 Users belonging to Groups
 Users can be modified/added at runtime
 Users’ password options:
 Change initial password
 Auto Logout timer
 Option for allowed passwords
 User editing at runtime
 Login/Logout/Switch users

PB610 Panel Builder
Assigning permissions (1)
 Authorizations
 Define groups
 Define per each group the “base
settings” authorizations
 Per widget
 Hide – Read Only – Full Access
 Per Action
 Allowed – Not Allowed

PB610 Panel Builder
Assigning permissions (2)
 Create Users
 Assign Users to Group
 Enable Security
 Setting exceptions
 Locate object in page
 Right click
 Set behaviour of the object per each group

PB610 Panel Builder
Working with Users and Authorizations
 Conditional access to a page
 One button
 Admin: visible and active
 Guest: visible, not active
 Remove user
 Check Groups configuration
 Define Users
 Enable security

PB610 Panel Builder
Scripting
 JavaScript
 Based on Standard ECMA-262 Script
 GUI script
 Server side script (not yet available)
 Debugger (in simulation and on target)
 Execution
 Widgets’ Events (Press, Release, Update)
 Page’s Events (Enter, Leave, Update)
 Flexible and powerful with access to:
 Tags
 Object Properties
 System Properties (in preparation)

HMI Panels CP600
CP600 Documents
 Link to CP600 Web page
 Link to CP600 range Brochure (pdf format)
 Link to CP600 – PB610 Panel Builder 600 manual (pdf format)
 You can find also an E-learning course named F854e, available within
the ABB University ( training Partner tool ) where you can find CP600
range description, + arguments, benefits, applications, and Competitor
comparisons.
Link to Training Partner tool:

CP600 training presentation_rev2.pptx

CP600 training presentation_rev2.pptx

Recommended

Recommended

More Related Content

Similar to CP600 training presentation_rev2.pptx

Similar to CP600 training presentation_rev2.pptx (20)

Recently uploaded

Recently uploaded (20)

CP600 training presentation_rev2.pptx