(1) The document provides safety information about the product L-MODUTM S400. It contains identification information, composition details, health hazard information, handling and storage guidelines, and regulatory compliance statements. (2) The product is a solid mixture containing over 99% polypropylene. It requires precautions such as avoiding dust accumulation, bonding containers for transfer to prevent static discharge, and using explosion-proof equipment. (3) In case of skin or eye contact, the document provides first aid measures such as flushing with water and seeking medical attention. It also contains fire-fighting instructions, accidental release measures, exposure controls and disposal guidelines.

1. (1／5)
SAFETY DATA SHEET
MSDS: CP-LMODUS400-GB1
Date Prepared: 2011/07/21
Date Revised:
1. Identification
2. Hazards identification
Precaution
Correspondence
Storage
Disposal
3. Composition/information on ingredients
>99 Not
applicab
le
Not
applicab
le
Not
applicab
le
4. First-aid measures
Inhalation:
9003-07-0Polypropylene
If inhaled, remove to fresh air. If not breathing, give
artificial respiration. If breathing is difficult, give oxygen.
Get medical attention immediately.
Mixture
CAS#
Concentr
ationwt.
%
Ingredient Name EC NO.
INDEX
NO.
REGISTRA
TION NO.
Do not empty into drains; dispose of this material and its
container at hazardous or special waste collection point.
LABEL ELEMENTS
hazard category Not applicable
Collect spillage.
Store in a well ventilated place. Keep container tightly closed.
Store locked up.
Dispose of waste and residues in accordance with local authority
requirements.
Use with local exhaust ventilation.
Avoid dust accumulation in enclosed space.
Avoid release to the environment.
To reduce potential for static discharge, bond and ground
containers when transferring material.
England
Foreign - Identification
of the supplier:
Idemitsu Chemicals Europe PLC Düsseldorf Branch
Foreign - Address: Elberfelder Strasse 2, 40213 Düsseldorf, Germany
Foreign - Charge section:
（TEL:49-211-17734-0,FAX:49-211-17734-23）
Precautionary Statements:
Ingredients and Concentration
Idemitsu Kosan Co.,Ltd.
1-1, Marunouchi 3-Chome, Chiyoda-Ku, Tokyo, 100-8321, JapanAddress:
Substance/Mixture:
Obtain special instructions before use.
Do not eat, drink or smoke when using this product.
Product Name: L-MODU™ S400
Charge section: Safety, Environment & Quality Assurance Department
（TEL:+81-3-3213-3613,FAX:+81-3-3213-9410）
Product Name:
Identification of the
supplier:
L-MODU™ S400

2. (2／5)
SAFETY DATA SHEET
MSDS: CP-LMODUS400-GB1
Date Prepared: 2011/07/21
Date Revised:
Product Name: L-MODU™ S400
5. Fire-fighting measures
Special
protective
equipment
and
precautions
for fire
fighters:
6. Accidental release measures
7. Handling and storage
Technical Measures:
Precautions for safe
handling:
If case of contact, immediately flush skin with soap and plenty
of water. Remove contaminated clothing and shoes. Get medical
attention immediately if symptoms occur.
Do not eat, drink or smoke when using this product.
Use personal protection recommended in Section 8. Isolate the
hazard area and deny entry to unnecessary and unprotected
personnel.
Keep away from heat/sparks/open flames/hot surfaces ? No smoking.
Use explosion-proof electrical/ventilating/lighting/…/equipment.
Wash exposed skin with soap and water before eating, drinking and
smoking.
Prevent runoff from entering waterways or sewers.
Personal precautions, protective
equipment and emergency procedures:
Environmental precautions:
To reduce potential for static discharge, bond and ground
containers when transferring material.
Use water fog, foam, dry chemicals or CO2
Keep upwind of fire. Wear full fire fighting turn-out gear (full
Bunker gear) and respiratory protection (SCBA). Cool container
with water spray.
Suitable Extinguishing Media:
Use personal protection recommended in Section 8. Isolate the
hazard area and deny entry to unnecessary and unprotected
personnel.
If case of contact, immediately flush skin with soap and plenty
of water. Remove contaminated clothing and shoes. Get medical
attention immediately if symptoms occur.
Flush eyes with water for at least 15 minutes while holding the
eyelids open. Remove contact lenses, if worn.
Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person.
Get medical attention immediately.
Skin Contact:
Eye Contact:
Ingestion:
Call a POISON CENTER or doctor/physician.
Handling
Methods and materials for
containment and cleaning up:
Ventilation
requirements:
Precautions:
Extinguishing Media to Avoid:

3. (3／5)
SAFETY DATA SHEET
MSDS: CP-LMODUS400-GB1
Date Prepared: 2011/07/21
Date Revised:
Product Name: L-MODU™ S400
8. Exposure controls/personal protection
STEL TWA STEL TWA
None
establis
hedppm,N
one
establis
hedmg/m3
None
establis
hedppm,N
one
establis
hedmg/m3
None
establis
hedppm,N
one
establis
hedmg/m3
None
establis
hedppm,N
one
establis
hedmg/m3
9. Physical and chemical properties
80(℃)
≧220Seta Closed CupFlash point:
No data.Vapour pressure:
Wear cold insulating gloves/face shield/eye protection.Skin Protection:
Do not eat, drink or smoke when using this product.Hygiene Measures:
Chemical goggles are recommended.
Wear cold insulating gloves/face shield/eye protection.
Eye/face protection:
Use adequate respiratory protection.Respiratory Protection:
Wear chemical resistant gloves.
Wear cold insulating gloves/face shield/eye protection.
Hand protection:
Ingredient Name
United Kingdom -
WEL
EU - OEL
Polypropylene
Use explosion-proof electrical/ventilating/lighting/…/equipment.
Take precautionary measures against static discharges. Risk
of dust explosion.
Build-up of electrostatic charge may be prevented by bonding and
grounding.
Appropriate engineering controls:
Storage Conditions:
Store in a well ventilated place. Keep container tightly closed.
Protect from sunlight. Store in a well ventilated place.
Store in tightly closed container.
Do not handle until all safety precautions have been read and
understood.
Store locked up.
Specific Gravity:
Color:
pH:
Melting point/freezing
point:
Initial boiling point
and boiling range:
No data.
No data.
Storage
Personal Protective Equipment
Product
Physical state:
Control parameters
Solid
Safety adequate
container materials:
Colorless
0.87

4. (4／5)
SAFETY DATA SHEET
MSDS: CP-LMODUS400-GB1
Date Prepared: 2011/07/21
Date Revised:
Product Name: L-MODU™ S400
10. Stability and reactivity
Hazardous
decompositi
on
products:
11. Toxicological information
12. Ecological information
13. Disposal considerations
Disposal
methods:
14. Transport information
No Data
Dispose of waste and residues in accordance with local authority requirements.
Do not empty into drains; dispose of this material and its container at hazardous or
special waste collection point.
Confirm there is no damage no leakage of the container, and do the collapse
of cargo piles prevention surely.
Specific security
precaution and condition
of transportation:
Ingredient
Polypropylene
Carcinogenicity: IARC:3
None LLNA [mouse]
Mutagenicity: Ames Test:Negative
Serious eye damage/irritation: None [rabbit]
Skin sensitization: MAY CAUSE ALLERGIC SKIN REACTION.
Acute toxicity (oral): LD50:＞ 2000 mg/kg[rat]
Skin corrosion/irritation: None [rabbit]
Chemical stability:
Conditions to avoid:
Incompatible materials:
Product
Stable at room temperature in closed containers under normal storage and
handling conditions.
Excess heat
Oxidizing agents.
Nitrogen oxides, carbon monoxide, carbon dioxide.
Partition coefficient:
n-octanol/water:
No data.
Possibility of hazardous
reactions:

5. (5／5)
SAFETY DATA SHEET
MSDS: CP-LMODUS400-GB1
Date Prepared: 2011/07/21
Date Revised:
Product Name: L-MODU™ S400
15. Regulatory information
16. Other information
Philippines(PICCS)： ○
Disclaimer The information contained in this document is created based on the
materials, data, and information that are available to us at this time of
writing. However, we assume no warranty regarding composition, physical
and chemical properties, and hazards of product and its ingredients.
Precautionary statements are only applicable when this product is used
under normal conditions. Please note that it is responsibility of user to
determine and take appropriate safety measures when the product is not used
for the purpose specified in this document.
New Zealand(NZIoC)： ○
USA(TSCA)： ○
Canada(DSL)： ○
China(IECSC)： ○
Korea(KECL)： ○
Australia(AICS)： ○
EU - REACH (1907/2006) -
Registration：
List of Pre-registered Substances(Polypropylene) , List of Registered
Substances , List of Substances Intended to be Registered in 2010
Japan(ENCS)： ○