Safe / Environmentally Friendly / Biodegradable / Kills Bacteria and Viruses / Compliments the Traditional Funeral / Natural / Organic / Regulatory Compliant / Funeral Services Supplier
Naturensbalm is a range of safe, environmentally acceptable embalming products, developed for the funeral industry in order to provide the embalmer with a healthier working environment, at the same time safeguarding the traditional funeral.
Naturensbalm holds a range of complementary products, all of which have been rigorously tested and trialled over a number of years, the range is fully compliant with the European Union’s Biocide Products Directive (BPD).
This document summarizes the properties and safety information for Road Bio, an aqueous cleaning agent used to remove oil spills. It can be used neat or diluted and poses minimal health risks if proper precautions are followed. The product contains sodium hydroxide and other components that are irritants but not classified as hazardous below certain concentrations. It is biodegradable and not considered toxic to the environment in recommended use.
This document provides safety information for the fungicide PP Captan 80 WG. It identifies the product and supplier, lists hazards such as eye and skin irritation and carcinogenicity, and provides guidance on handling, storage, exposure controls, firefighting and accidental release. The product contains 80% captan as the active ingredient and is a water dispersible granule. It requires protective equipment due to the risks of eye damage, skin sensitization and cancer.
1) Bacitracin is a white to pale tan powder with the molecular formula C66H102N17O16S. It has a molecular weight of 1421.68 g/mol and is soluble in methanol and ethanol.
2) Bacitracin is hazardous if it contacts eyes, skin or is ingested. Inhalation can also be hazardous. It can cause damage to lungs, nervous system and mucous membranes with repeated exposure.
3) Personal protective equipment including gloves, lab coat, and dust respirator should be worn when handling Bacitracin due to its toxicity. Proper disposal methods should follow applicable waste disposal regulations.
This safety data sheet provides information on SOBO S GOLD 08, a water soluble degreaser and surface cleaner. It lists the product identification and supplier contact information. It identifies the product as irritating to eyes. The document lists hazardous ingredients, first aid measures, firefighting measures, accidental release measures and handling and storage requirements. It also provides physical/chemical properties, stability and reactivity data, toxicological information, ecological data, disposal considerations and transport information.
Energol ic-hfx-404-9389 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
This safety data sheet provides information on Energol IC-HF X 404 engine oil. It contains no hazardous ingredients above regulated thresholds. Prolonged skin contact may cause irritation. Used engine oil may contain carcinogens. If contact occurs, wash skin and eyes thoroughly. Store in a dry, well-ventilated area away from heat and sunlight. In a fire, this product may decompose and produce carbon oxides, sulfur oxides and metal oxides. Dispose of waste via licensed contractor and in accordance with local regulations to prevent environmental contamination.
This document provides a material safety data sheet for the chemical compound Pimobendan. It summarizes the product name and company details, composition, hazards, safe handling procedures, and other regulatory information. Pimobendan is a white powder with the formula C19H18N4O2 that is slightly soluble in organic solvents and insoluble in water. It is hazardous if inhaled, ingested, or gets in contact with skin or eyes. Proper personal protective equipment should be worn when handling it.
This document provides a safety data sheet for the product Alkazyme. It identifies the product and company details in section 1. Section 2 outlines the hazards associated with the product, such as eye irritation. Section 3 gives the composition of the product, including the hazardous substances sodium carbonate and propan-2-ol present. Personal protective measures and first aid actions are described in sections 4 and 8. Storage and handling recommendations are provided in sections 7 and 8.
Energol rc-4997 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
1. Energol RC 100 is a compressor lubricant produced by Castrol BP Petco Ltd. for specific industrial applications.
2. The product contains highly refined base oils and proprietary additives. It is not classified as hazardous and does not contain any ingredients above regulated thresholds.
3. Prolonged or repeated skin contact can cause defatting of the skin and irritation. The product should not be used in compressors producing breathable air.
This document summarizes the properties and safety information for Road Bio, an aqueous cleaning agent used to remove oil spills. It can be used neat or diluted and poses minimal health risks if proper precautions are followed. The product contains sodium hydroxide and other components that are irritants but not classified as hazardous below certain concentrations. It is biodegradable and not considered toxic to the environment in recommended use.
This document provides safety information for the fungicide PP Captan 80 WG. It identifies the product and supplier, lists hazards such as eye and skin irritation and carcinogenicity, and provides guidance on handling, storage, exposure controls, firefighting and accidental release. The product contains 80% captan as the active ingredient and is a water dispersible granule. It requires protective equipment due to the risks of eye damage, skin sensitization and cancer.
1) Bacitracin is a white to pale tan powder with the molecular formula C66H102N17O16S. It has a molecular weight of 1421.68 g/mol and is soluble in methanol and ethanol.
2) Bacitracin is hazardous if it contacts eyes, skin or is ingested. Inhalation can also be hazardous. It can cause damage to lungs, nervous system and mucous membranes with repeated exposure.
3) Personal protective equipment including gloves, lab coat, and dust respirator should be worn when handling Bacitracin due to its toxicity. Proper disposal methods should follow applicable waste disposal regulations.
This safety data sheet provides information on SOBO S GOLD 08, a water soluble degreaser and surface cleaner. It lists the product identification and supplier contact information. It identifies the product as irritating to eyes. The document lists hazardous ingredients, first aid measures, firefighting measures, accidental release measures and handling and storage requirements. It also provides physical/chemical properties, stability and reactivity data, toxicological information, ecological data, disposal considerations and transport information.
Energol ic-hfx-404-9389 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
This safety data sheet provides information on Energol IC-HF X 404 engine oil. It contains no hazardous ingredients above regulated thresholds. Prolonged skin contact may cause irritation. Used engine oil may contain carcinogens. If contact occurs, wash skin and eyes thoroughly. Store in a dry, well-ventilated area away from heat and sunlight. In a fire, this product may decompose and produce carbon oxides, sulfur oxides and metal oxides. Dispose of waste via licensed contractor and in accordance with local regulations to prevent environmental contamination.
This document provides a material safety data sheet for the chemical compound Pimobendan. It summarizes the product name and company details, composition, hazards, safe handling procedures, and other regulatory information. Pimobendan is a white powder with the formula C19H18N4O2 that is slightly soluble in organic solvents and insoluble in water. It is hazardous if inhaled, ingested, or gets in contact with skin or eyes. Proper personal protective equipment should be worn when handling it.
This document provides a safety data sheet for the product Alkazyme. It identifies the product and company details in section 1. Section 2 outlines the hazards associated with the product, such as eye irritation. Section 3 gives the composition of the product, including the hazardous substances sodium carbonate and propan-2-ol present. Personal protective measures and first aid actions are described in sections 4 and 8. Storage and handling recommendations are provided in sections 7 and 8.
Energol rc-4997 Liên hệ: Mr Tùng 0987 988 407 website: www.khodaumo.comĐỗ Bá Tùng
1. Energol RC 100 is a compressor lubricant produced by Castrol BP Petco Ltd. for specific industrial applications.
2. The product contains highly refined base oils and proprietary additives. It is not classified as hazardous and does not contain any ingredients above regulated thresholds.
3. Prolonged or repeated skin contact can cause defatting of the skin and irritation. The product should not be used in compressors producing breathable air.
(1) The document provides safety information about the product L-MODUTM S400. It contains identification information, composition details, health hazard information, handling and storage guidelines, and regulatory compliance statements.
(2) The product is a solid mixture containing over 99% polypropylene. It requires precautions such as avoiding dust accumulation, bonding containers for transfer to prevent static discharge, and using explosion-proof equipment.
(3) In case of skin or eye contact, the document provides first aid measures such as flushing with water and seeking medical attention. It also contains fire-fighting instructions, accidental release measures, exposure controls and disposal guidelines.
This document provides a material safety data sheet for Sobo Gold, a water soluble degreaser and cleaner concentrate. It lists the product description and properties, identifies hazards such as eye and skin irritation, and outlines first aid measures. The document also provides information on the product's composition, handling, storage, exposure controls, physical properties, stability, ecotoxicity, disposal, and regulatory compliance. Sobo Gold is a readily biodegradable product that poses minimal risks to health or the environment when used as directed.
This safety data sheet provides information on the product TALISMA UL. It contains a mixture of cypermethrin and piperonyl butoxide. The document lists hazards such as being very toxic to aquatic life with long lasting effects. It provides handling, storage, exposure and personal protective equipment recommendations. The product has a density of 0.8933 g/ml and a flash point above 79°C. It is not readily biodegradable and components may bioaccumulate in fish and other organisms.
This document summarizes information on the chemical Avanafil, including:
- Chemical and company identification details
- Composition and toxicological data on Avanafil
- Hazards identification as an eye and skin irritant
- First aid measures in case of exposure
- Fire and explosion risk data
- Accidental release measures
- Handling and storage guidelines
- Exposure controls and personal protective equipment requirements
- Physical and chemical properties
- Toxicity and ecological information
- Transport, disposal, and regulatory information
This document provides information on Sinopec Maoming fully refined 58°C paraffin wax. It describes the product's properties including a melting point of 58-60 Celsius and oil content of less than 0.8%. Applications listed include candle making, wax carving, and matches. The document also provides safety information, advising the product is not classified as hazardous according to EU directives. It describes handling, storage, and personal protective equipment recommendations.
This document provides a material safety data sheet for Tianeptine Sulfate powder. It lists the chemical's product name and CAS number, chemical formula, manufacturer contact information, composition, toxicological data, potential health effects, first aid measures for exposure, fire and explosion hazards, handling and storage guidelines, exposure limits, physical properties, stability, ecological information, and regulatory information. The chemical is a white to yellowish powder that is hazardous if inhaled, ingested, or gets in contact with skin or eyes, and can damage lungs, nervous system or mucous membranes with repeated exposure.
This document provides information on the chemical Alprostadil. Key details include:
- Alprostadil is a white to slightly yellowish powder with the formula C9H15N5O5 and molecular weight of 354.49 g/mol.
- It is highly hazardous if ingested or through eye contact, and hazardous through skin contact or inhalation.
- Exposure can damage lungs, nervous system and mucous membranes. Protective equipment including gloves, eye protection and respirators are recommended when handling.
- Spills should be cleaned up promptly by collecting the material and disposing according to local regulations. Storage requires keeping containers tightly closed in a cool, well-ventilated area.
This document provides a safety data sheet for Pigment Green 50, an inorganic pigment. It identifies hazards such as skin sensitization, carcinogenicity, and specific target organ toxicity from repeated inhalation exposure. It provides details on product identification, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
This document provides a safety data sheet for the product MARPOZOL W-505, which is a sizing agent for weaving. The summary includes:
1) It identifies hazards such as serious eye irritation, genetic defects, effects on fertility, organ damage, and respiratory irritation.
2) It lists first aid measures such as flushing eyes with water and seeking medical attention if swallowed.
3) It provides handling and storage instructions to prevent fire, exposure, and release to the environment.
This document provides a material safety data sheet for bupropion hydrochloride (Bupropion HCl). It summarizes the chemical and physical properties of Bupropion HCl, potential health effects, guidelines for safe handling and storage, exposure controls, and disposal considerations. The document contains information on the product name and manufacturer contact information in section 1, composition in section 2, hazards identification in section 3, first aid measures in section 4, fire fighting measures in section 5, accidental release measures in section 6, handling and storage in section 7, exposure controls and personal protection in section 8, physical properties in section 9, stability in section 10, toxicological information in section 11, ecological information in section 12,
This document provides a material safety data sheet for Road Bio, an aqueous cleaning agent used to remove oil spills. It is a non-flammable, low-foaming liquid that can be used neat or diluted for brush or jetting applications. Prolonged skin contact should be avoided as it is irritating to skin and eyes. Ingestion may cause stomach irritation. It contains surfactants that are ultimately biodegradable. Precautions should be taken to prevent environmental contamination and measures are outlined for safe handling, storage, exposure control and disposal.
This document provides a safety data sheet for Sobo Gold, a water soluble degreaser and cleaner concentrate. It lists the product description and properties, identifies that it is an irritant but not hazardous to the environment. It also provides handling, storage, exposure and first aid information, noting the product is readily biodegradable and has low oral toxicity.
This document provides a material safety data sheet for sodium chloride. It lists the company details, product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and a contact point. Sodium chloride is not hazardous according to European directives, does not require protective equipment during normal handling, and is stable under normal conditions.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
This document provides a material safety data sheet for an anionic polyelectrolyte product used as a flocculant and settling agent. It presents no known human health hazards when handled or used properly. The product is a white, granular powder that is non-flammable but may form explosive mixtures if dust is suspended in air. When wet, it becomes very slippery. Proper handling and storage procedures are outlined to prevent health issues and unsafe conditions.
Material Safety Data Sheet (MSDS) for Dermasome-Chol (NE) a Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Chol (NE). The Dermasome-Chol (NE) formulation is composed of unsaturated phospholipids and it does not contain alcohol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome-Chol (NE) a Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Chol (NE). The Cosmesome-Chol (NE) formulation is composed of saturated phospholipids and it does not contain alcohol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Pigment red 531 cas 5281 04-9 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
(1) The document provides safety information about the product L-MODUTM S400. It contains identification information, composition details, health hazard information, handling and storage guidelines, and regulatory compliance statements.
(2) The product is a solid mixture containing over 99% polypropylene. It requires precautions such as avoiding dust accumulation, bonding containers for transfer to prevent static discharge, and using explosion-proof equipment.
(3) In case of skin or eye contact, the document provides first aid measures such as flushing with water and seeking medical attention. It also contains fire-fighting instructions, accidental release measures, exposure controls and disposal guidelines.
This document provides a material safety data sheet for Sobo Gold, a water soluble degreaser and cleaner concentrate. It lists the product description and properties, identifies hazards such as eye and skin irritation, and outlines first aid measures. The document also provides information on the product's composition, handling, storage, exposure controls, physical properties, stability, ecotoxicity, disposal, and regulatory compliance. Sobo Gold is a readily biodegradable product that poses minimal risks to health or the environment when used as directed.
This safety data sheet provides information on the product TALISMA UL. It contains a mixture of cypermethrin and piperonyl butoxide. The document lists hazards such as being very toxic to aquatic life with long lasting effects. It provides handling, storage, exposure and personal protective equipment recommendations. The product has a density of 0.8933 g/ml and a flash point above 79°C. It is not readily biodegradable and components may bioaccumulate in fish and other organisms.
This document summarizes information on the chemical Avanafil, including:
- Chemical and company identification details
- Composition and toxicological data on Avanafil
- Hazards identification as an eye and skin irritant
- First aid measures in case of exposure
- Fire and explosion risk data
- Accidental release measures
- Handling and storage guidelines
- Exposure controls and personal protective equipment requirements
- Physical and chemical properties
- Toxicity and ecological information
- Transport, disposal, and regulatory information
This document provides information on Sinopec Maoming fully refined 58°C paraffin wax. It describes the product's properties including a melting point of 58-60 Celsius and oil content of less than 0.8%. Applications listed include candle making, wax carving, and matches. The document also provides safety information, advising the product is not classified as hazardous according to EU directives. It describes handling, storage, and personal protective equipment recommendations.
This document provides a material safety data sheet for Tianeptine Sulfate powder. It lists the chemical's product name and CAS number, chemical formula, manufacturer contact information, composition, toxicological data, potential health effects, first aid measures for exposure, fire and explosion hazards, handling and storage guidelines, exposure limits, physical properties, stability, ecological information, and regulatory information. The chemical is a white to yellowish powder that is hazardous if inhaled, ingested, or gets in contact with skin or eyes, and can damage lungs, nervous system or mucous membranes with repeated exposure.
This document provides information on the chemical Alprostadil. Key details include:
- Alprostadil is a white to slightly yellowish powder with the formula C9H15N5O5 and molecular weight of 354.49 g/mol.
- It is highly hazardous if ingested or through eye contact, and hazardous through skin contact or inhalation.
- Exposure can damage lungs, nervous system and mucous membranes. Protective equipment including gloves, eye protection and respirators are recommended when handling.
- Spills should be cleaned up promptly by collecting the material and disposing according to local regulations. Storage requires keeping containers tightly closed in a cool, well-ventilated area.
This document provides a safety data sheet for Pigment Green 50, an inorganic pigment. It identifies hazards such as skin sensitization, carcinogenicity, and specific target organ toxicity from repeated inhalation exposure. It provides details on product identification, composition, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations.
This document provides a safety data sheet for the product MARPOZOL W-505, which is a sizing agent for weaving. The summary includes:
1) It identifies hazards such as serious eye irritation, genetic defects, effects on fertility, organ damage, and respiratory irritation.
2) It lists first aid measures such as flushing eyes with water and seeking medical attention if swallowed.
3) It provides handling and storage instructions to prevent fire, exposure, and release to the environment.
This document provides a material safety data sheet for bupropion hydrochloride (Bupropion HCl). It summarizes the chemical and physical properties of Bupropion HCl, potential health effects, guidelines for safe handling and storage, exposure controls, and disposal considerations. The document contains information on the product name and manufacturer contact information in section 1, composition in section 2, hazards identification in section 3, first aid measures in section 4, fire fighting measures in section 5, accidental release measures in section 6, handling and storage in section 7, exposure controls and personal protection in section 8, physical properties in section 9, stability in section 10, toxicological information in section 11, ecological information in section 12,
This document provides a material safety data sheet for Road Bio, an aqueous cleaning agent used to remove oil spills. It is a non-flammable, low-foaming liquid that can be used neat or diluted for brush or jetting applications. Prolonged skin contact should be avoided as it is irritating to skin and eyes. Ingestion may cause stomach irritation. It contains surfactants that are ultimately biodegradable. Precautions should be taken to prevent environmental contamination and measures are outlined for safe handling, storage, exposure control and disposal.
This document provides a safety data sheet for Sobo Gold, a water soluble degreaser and cleaner concentrate. It lists the product description and properties, identifies that it is an irritant but not hazardous to the environment. It also provides handling, storage, exposure and first aid information, noting the product is readily biodegradable and has low oral toxicity.
This document provides a material safety data sheet for sodium chloride. It lists the company details, product identification, hazards, first aid measures, firefighting measures, accidental release measures, handling and storage, exposure controls and personal protection, physical properties, stability and reactivity, toxicological information, ecological information, disposal considerations, transport information, regulatory information, and a contact point. Sodium chloride is not hazardous according to European directives, does not require protective equipment during normal handling, and is stable under normal conditions.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
This document provides a material safety data sheet for an anionic polyelectrolyte product used as a flocculant and settling agent. It presents no known human health hazards when handled or used properly. The product is a white, granular powder that is non-flammable but may form explosive mixtures if dust is suspended in air. When wet, it becomes very slippery. Proper handling and storage procedures are outlined to prevent health issues and unsafe conditions.
Material Safety Data Sheet (MSDS) for Dermasome-Chol (NE) a Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Chol (NE). The Dermasome-Chol (NE) formulation is composed of unsaturated phospholipids and it does not contain alcohol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Cosmesome-Chol (NE) a Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Chol (NE). The Cosmesome-Chol (NE) formulation is composed of saturated phospholipids and it does not contain alcohol. The proliposome formulation forms liposomes containing cholesterol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Pigment red 531 cas 5281 04-9 msds, Our products are organic pigments, antioxidants, uv absorber, light stabilizers, optical brighteners. Also are agent of Addivant and Xrite in China, website:https://www.additivesforpolymer.com email:info@additivesforpolymer.com
This material safety data sheet provides information on xanthan gum, including its composition as a polysaccharide gum, hazards, first aid measures, fire fighting measures, accidental release measures, handling and storage, exposure controls, physical and chemical properties, stability and reactivity, toxicological information, ecological information, and disposal considerations. Xanthan gum is a white to tan powder that is combustible and may form an explosive mixture if dispersed in air. It can cause minor eye and skin irritation upon contact.
- The document is a material safety data sheet for Pigment Orange 13, which is used as a colorant in printing inks, paints, textiles, plastics, and cosmetics.
- Pigment Orange 13 is not considered hazardous to humans or the environment but is combustible and dust explosions are a risk.
- In case of inhalation, skin contact, or eye contact, remove contaminated clothing and flush affected areas with water. Do not ingest.
- Store in a dry, cool, well-ventilated place away from direct heat and sources of ignition. Use ventilation with dust filters when handling.
- Pigment Orange 13 is an insoluble reddish-orange powder with
zimmer aufraumen hard surface cleaner concentrate SDS by ZAglobal Canada Regulatory Desk, for US canada.
This contains safety data sheet for Zimmer Aufraumen (Zaglobal) products
Material Safety Data Sheet (MSDS) for Cosmesome (containing alcohol). Product Spec Sheet for Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome. The Cosmesome formulation is composed of saturate phospholipids that form interdigitated lipids in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Material Safety Data Sheet (MSDS) for Dermasome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Dermasome-Res. The Dermasome-Res formulation is composed of unsaturated phospholipids in the presence of ethanol. The proliposome formulation forms liposomes containing resveratrol upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
1. This document provides a material safety data sheet for a 1N solution of acetic acid. It is composed of 6% acetic acid and 94% water by weight.
2. Acetic acid is corrosive and hazardous if ingested, inhaled, or comes into contact with skin or eyes. It can cause burns and damage tissues. Repeated exposure may damage the blood, kidneys, lungs and other organs.
3. Personal protective equipment including gloves, safety goggles and protective clothing should be worn when handling this solution. Good ventilation is also necessary due to acetic acid's irritating vapors.
Material Safety Data Sheet (MSDS) for Cosmesome-Res (containing alcohol). Proliposome formulation manufactured by Encapsula NanoSciences that is used specifically in the cosmetic industry. The brand name is Cosmesome-Res. The Cosmesome-Res formulation is composed of saturated phospholipids that form interdigitated lipids containing resveratrol in the presence of alcohol. The proliposome formulation forms liposomes upon dilution with water. During the dilution process water soluble active ingredients can be encapsulated inside the liposomes or liposoluble active ingredients can be incorporated into the lipid bilayers.
Similar to Naturensbalm MSDS - Supplying quality user friendly embalming products to the funeral industry (20)
Promoting Wellbeing - Applied Social Psychology - Psychology SuperNotesPsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
share - Lions, tigers, AI and health misinformation, oh my!.pptxTina Purnat
• Pitfalls and pivots needed to use AI effectively in public health
• Evidence-based strategies to address health misinformation effectively
• Building trust with communities online and offline
• Equipping health professionals to address questions, concerns and health misinformation
• Assessing risk and mitigating harm from adverse health narratives in communities, health workforce and health system
Naturensbalm MSDS - Supplying quality user friendly embalming products to the funeral industry
1. THE PRODUCT RANGE & MSDS
• NATUREArterial:
An organic, non-toxic sanitising and disinfecting fluid.
The fluid comes in concentrated 1 litre version, containers are recyclable when empty.
In its original state, NATUREArterial is a dark brown/yellow viscous solution, which
works in conjunction with NATUREFlo, an activator and arterial conditioner.
• NATUREFlo:
Designed to activate the NATUREArterial by reducing the surface tension and to allow
the viscous fluid to penetrate the tissues of the body more effectively.
FLO also removes the dark colour, allowing the operators to ‘self-dye’ the fluid to their own
specific requirements.
• NATUREColour:
A red colour concentrate specifically designed to work with NATUREArterial to provide
excellent presentation for viewing.
• NATURECavity:
A Cavity fluid designed for straight cases.
• NATURECavity - Post Mortem:
A more viscous cavity fluid, for treating the viscera of post mortem cases.
• NATUREUltra:
Water corrective – 1-litre bottles.
• NATUREUltra - X:
Water corrective for exceptionally hard water areas – 1-litre bottles.
• NATUREOedema:
Helps stabilise cases with excess fluid retention. NAT UREOedema fluid should be used
as a direct replacement of the NATUREFlo in Oedematous cases and not in addition to
NATUREFlo.
• NATURECavity Gel:
A topical application for treating the cavities of post mortem cases, also the thoracic and
abdominal flaps and the anterior and posterior flaps of the scalp.
• NATURExternal Gel:
Suitable for topical application to the outer surface of the abdominal areas in severely
degenerating cases.
• NATUREGel -X:
For the treatment of diseased tissues, i.e. bedsores. This thick application will hold in place
under a dressing and has been found to virtually eradicate the odour associated with
diseased tissues.
2. SAFETY DATA SHEET
Date of issue: 08/03/05
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Catalogue No:
Product name: Naturensbal m Arterial Fluid
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Solution in water
Product name: Iodine solutions
Povidone Iodine
CAS number:
<20%
25655-41-8
Sodium alginate
CAS number :
<10%
9005-38-3
3. Hazards identification
Not classified as dangerous according to EC Directives
4. First aid measures
- Eye contact: Irrigate thoroughly with water for at least 10 minutes. OBTAIN MEDICAL ATTENTION.
- Inhalation: Remove from exposure, rest and keep warm. In severe cases obtain medical attention.
- Skin contact: Wash off skin thoroughly with water. Remove contaminated clothing and wash before re-use.
- Ingestion: Wash out mouth thoroughly with water and give plenty of water to drink. OBTAIN MEDICAL ATTENTION.
5. Fire-fighting measures
Special risks:
May evolve toxic fumes in fire. (Iodine)
Suitable extinguishing media:
To suit environment.
6. Accidental release measures
Wear appropriate protective clothing.
3. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
Wash hands and face thoroughly after working with material. Contaminated clothing should be removed and washed
before re-use.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
OES, Iodine:
Short term: 1.1 mg/m3 (0.1 ppm)
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
liquid Colour:
dark brown
slightly pungent
Odour:
Health, safety and environmental information:
Melting temperature
Boiling temperature
Solubility in water
Flash point
Explosion limits:
Auto-ignition temperature
lower:
10. Stability and reactivity
Not available
Not available
Miscible in all proportions
Not applicable
Not applicable
Not applicable
4. Stable.
No data
11. Toxicological information
- After inhalation: May irritate.
- After eye contact: local irritation symptoms
- After skin contact: May irritate.
- After ingestion: gastrointestinal symptoms
Further data
The following applies to iodides in general: sensitization with allergic manifestations in predisposed persons.
We have no evidence of carcinogenic effects. We have no evidence of mutagenic or teratogenic effects.
12. Ecological information
The following applies to iodides in general: biological effects: crustaceans: D. magna EC50: 2.7 mg/l; protozoa: E.
sulcatum toxic from 40 mg/l up.
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Local Regulations
Within the UK, the use of this material must be assessed under the Control of Substances Hazardous to Health (COSHH)
regulations.
16. Other information
Revision.
Supercedes issue of 18/08/94
5. SAFETY DATA SHEET
Date of issue: 16-03-08
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Product name: NATUREFlo
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Organic liquid
Product name: NATUREFlo
CAS number: Not applicable
EC-No.: Mixture
3. Hazards identification
Not classified as dangerous according to EC Directives.
4. First aid measures
- Eye contact: Irrigate thoroughly with water. If discomfort persists obtain medical attention.
- Inhalation: Remove from exposure.
- Skin contact: Wash off thoroughly with soap and water.
- Ingestion: Wash out mouth thoroughly with water. In severe cases obtain medical attention.
5. Fire-fighting measures
Special risks:
Combustible.
Suitable extinguishing media:
Water spray, foam, dry powder or carbon dioxide
6. Accidental release measures
Wear appropriate protective clothing.
If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
6. 7. Handling and storage
Handling:
No special precautions necessary.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
None assigned
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
liquid
colourless
odourless
Health, safety and environmental information:
Melting temperature
Boiling temperature
Density(g/ml)
Solubility in water
pH value
Flash point
Explosion limits:
lower:
Auto-ignition temperature
3°C
>250°C
1.055
Miscible in all proportions
5-7
245°C
No data
370°C
10. Stability and reactivity
Stable.
Substances to be avoided
strong oxidizing agents.
The possibility of reaction with other substances cannot be excluded.
7. 11. Toxicological information
Very low acute toxicity in animal experiments. Hazardous properties are relatively improbable. The product should be
handled with the care usual when dealing with chemicals.
Further data
No Information.
12. Ecological information
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Not classified as dangerous according to EC Directives.
EC-No.: Mixture not applicable
Local Regulations
16. Other information
Revision:
Supercedes issue of 14/06/04
Formulation change
Date of issue:
Date of print:
16/03/08
16/03/08
8. SAFETY DATA SHEET
Date of issue: 16/03/08
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Catalogue No:
Product name: Naturensbal m Cavity Fluid
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Solution in water
Product name: Iodine solutions
Povidone Iodine
CAS number:
<20%
25655-41-8
3. Hazards identification
Not classified as dangerous according to EC Directives
4. First aid measures
- Eye contact: Irrigate thoroughly with water for at least 10 minutes. OBTAIN MEDICAL ATTENTION.
- Inhalation: Remove from exposure, rest and keep warm. In severe cases obtain medical attention.
- Skin contact: Wash off skin thoroughly with water. Remove contaminated clothing and wash before re-use.
- Ingestion: Wash out mouth thoroughly with water and give plenty of water to drink. OBTAIN MEDICAL ATTENTION.
5. Fire-fighting measures
Special risks:
May evolve toxic fumes in fire. (Iodine)
Suitable extinguishing media:
To suit environment.
6. Accidental release measures
Wear appropriate protective clothing.
9. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
Wash hands and face thoroughly after working with material. Contaminated clothing should be removed and washed
before re-use.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
OES, Iodine:
Short term: 1.1 mg/m3 (0.1 ppm)
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
liquid Colour:
dark brown
slightly pungent
Odour:
Health, safety and environmental information:
Melting temperature
Boiling temperature
Solubility in water
Flash point
Explosion limits:
Auto-ignition temperature
lower:
10. Stability and reactivity
Not available
Not available
Miscible in all proportions
Not applicable
Not applicable
Not applicable
10. Stable.
No data
11. Toxicological information
- After inhalation: May irritate.
- After eye contact: local irritation symptoms
- After skin contact: May irritate.
- After ingestion: gastrointestinal symptoms
Further data
The following applies to iodides in general: sensitization with allergic manifestations in predisposed persons.
We have no evidence of carcinogenic effects. We have no evidence of mutagenic or teratogenic effects.
12. Ecological information
The following applies to iodides in general: biological effects: crustaceans: D. magna EC50: 2.7 mg/l; protozoa: E.
sulcatum toxic from 40 mg/l up.
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Local Regulations
Within the UK, the use of this material must be assessed under the Control of Substances Hazardous to Health (COSHH)
regulations.
16. Other information
Revision.
Supercedes issue of 08/01/06
11. SAFETY DATA SHEET
Date of issue: 16/03/08
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Catalogue No:
Product name: Naturensbal m Cavity Post Mortem Fluid
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Solution in water
Product name: Iodine solutions
Povidone Iodine
CAS number:
<20%
25655-41-8
3. Hazards identification
Not classified as dangerous according to EC Directives
4. First aid measures
- Eye contact: Irrigate thoroughly with water for at least 10 minutes. OBTAIN MEDICAL ATTENTION.
- Inhalation: Remove from exposure, rest and keep warm. In severe cases obtain medical attention.
- Skin contact: Wash off skin thoroughly with water. Remove contaminated clothing and wash before re-use.
- Ingestion: Wash out mouth thoroughly with water and give plenty of water to drink. OBTAIN MEDICAL ATTENTION.
5. Fire-fighting measures
Special risks:
May evolve toxic fumes in fire. (Iodine)
Suitable extinguishing media:
To suit environment.
6. Accidental release measures
Wear appropriate protective clothing.
12. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
Wash hands and face thoroughly after working with material. Contaminated clothing should be removed and washed
before re-use.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
OES, Iodine:
Short term: 1.1 mg/m3 (0.1 ppm)
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
liquid Colour:
dark brown
slightly pungent
Odour:
Health, safety and environmental information:
Melting temperature
Boiling temperature
Solubility in water
Flash point
Explosion limits:
Auto-ignition temperature
lower:
10. Stability and reactivity
Not available
Not available
Miscible in all proportions
Not applicable
Not applicable
Not applicable
13. Stable.
No data
11. Toxicological information
- After inhalation: May irritate.
- After eye contact: local irritation symptoms
- After skin contact: May irritate.
- After ingestion: gastrointestinal symptoms
Further data
The following applies to iodides in general: sensitization with allergic manifestations in predisposed persons.
We have no evidence of carcinogenic effects. We have no evidence of mutagenic or teratogenic effects.
12. Ecological information
The following applies to iodides in general: biological effects: crustaceans: D. magna EC50: 2.7 mg/l; protozoa: E.
sulcatum toxic from 40 mg/l up.
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Local Regulations
Within the UK, the use of this material must be assessed under the Control of Substances Hazardous to Health (COSHH)
regulations.
16. Other information
General Revision.
Supercedes issue of 10/01/06
14. SAFETY DATA SHEET
Date of issue: 16-03-08
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Product name: NATUREOedema
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Organic liquid
Product name: NATUREOedema
CAS number: Not applicable
EC-No.: Mixture
3. Hazards identification
Not classified as dangerous according to EC Directives.
4. First aid measures
- Eye contact: Irrigate thoroughly with water. If discomfort persists obtain medical attention.
- Inhalation: Remove from exposure.
- Skin contact: Wash off thoroughly with soap and water.
- Ingestion: Wash out mouth thoroughly with water. In severe cases obtain medical attention.
5. Fire-fighting measures
Special risks:
Combustible.
Suitable extinguishing media:
Water spray, foam, dry powder or carbon dioxide
6. Accidental release measures
Wear appropriate protective clothing.
If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
15. 7. Handling and storage
Handling:
No special precautions necessary.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
None assigned
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
liquid
colourless
odourless
Health, safety and environmental information:
Melting temperature
Boiling temperature
Density(g/ml)
Solubility in water
pH value
Flash point
Explosion limits:
lower:
Auto-ignition temperature
3°C
>250°C
1.2
Miscible in all proportions
6.5 - 8
245°C
No data
370°C
10. Stability and reactivity
Stable.
Substances to be avoided
strong oxidizing agents.
The possibility of reaction with other substances cannot be excluded.
16. 11. Toxicological information
Very low acute toxicity in animal experiments. Hazardous properties are relatively improbable. The product should be
handled with the care usual when dealing with chemicals.
Further data
No Information.
12. Ecological information
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Not classified as dangerous according to EC Directives.
EC-No.: Mixture not applicable
Local Regulations
16. Other information
Revision:
Supercedes issue of 14/06/04
Formulation change
Date of issue:
Date of print:
16/03/08
16/03/08
17. SAFETY DATA SHEET
Date of issue: 01-07-04
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Product name: NATUREUltra
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Organic liquid
Product name: NATUREUltra
CAS number: Not applicable
EC-No.: Mixture
3. Hazards identification
Not classified as dangerous according to EC Directives.
4. First aid measures
- Eye contact: Irrigate thoroughly with water. If discomfort persists obtain medical attention.
- Inhalation: Remove from exposure.
- Skin contact: Wash off thoroughly with soap and water.
- Ingestion: Wash out mouth thoroughly with water. In severe cases obtain medical attention.
5. Fire-fighting measures
Special risks:
Combustible.
Suitable extinguishing media:
Water spray, foam, dry powder or carbon dioxide
6. Accidental release measures
Wear appropriate protective clothing.
If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
18. 7. Handling and storage
Handling:
No special precautions necessary.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
None assigned
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
liquid
colourless
odourless
Health, safety and environmental information:
Melting temperature
Boiling temperature
Density(g/ml)
Solubility in water
pH value
Flash point
Explosion limits:
lower:
Auto-ignition temperature
3°C
>250°C
1.055
Miscible in all proportions
7
245°C
No data
370°C
10. Stability and reactivity
Stable.
Substances to be avoided
strong oxidizing agents.
The possibility of reaction with other substances cannot be excluded.
19. 11. Toxicological information
Very low acute toxicity in animal experiments. Hazardous properties are relatively improbable. The product should be
handled with the care usual when dealing with chemicals.
Further data
LD50 30200 mg/kg oral, rat.
12. Ecological information
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Not classified as dangerous according to EC Directives.
EC-No.: 203-473-3
Local Regulations
16. Other information
Date of issue:
Date of print:
01/07/04
01/07/04
20. SAFETY DATA SHEET
Date of issue: 08/03/05
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Catalogue No:
Product name: Naturensbal m Bedsore Gel
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Solution in water
Product name: Iodine solutions
Povidone Iodine
CAS number:
<20%
25655-41-8
Sodium alginate
CAS number :
<20%
9005-38-3
3. Hazards identification
Not classified as dangerous according to EC Directives
4. First aid measures
- Eye contact: Irrigate thoroughly with water for at least 10 minutes. OBTAIN MEDICAL ATTENTION.
- Inhalation: Remove from exposure, rest and keep warm. In severe cases obtain medical attention.
- Skin contact: Wash off skin thoroughly with water. Remove contaminated clothing and wash before re-use.
- Ingestion: Wash out mouth thoroughly with water and give plenty of water to drink. OBTAIN MEDICAL ATTENTION.
5. Fire-fighting measures
Special risks:
May evolve toxic fumes in fire. (Iodine)
Suitable extinguishing media:
To suit environment.
6. Accidental release measures
Wear appropriate protective clothing.
21. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
Wash hands and face thoroughly after working with material. Contaminated clothing should be removed and washed
before re-use.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
OES, Iodine:
Short term: 1.1 mg/m3 (0.1 ppm)
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
Gel
dark brown
slightly pungent
Health, safety and environmental information:
Melting temperature
Boiling temperature
Solubility in water
Flash point
Explosion limits:
Auto-ignition temperature
lower:
10. Stability and reactivity
Not available
Not available
Miscible in all proportions
Not applicable
Not applicable
Not applicable
22. Stable.
No data
11. Toxicological information
- After inhalation: May irritate.
- After eye contact: local irritation symptoms
- After skin contact: May irritate.
- After ingestion: gastrointestinal symptoms
Further data
The following applies to iodides in general: sensitization with allergic manifestations in predisposed persons.
We have no evidence of carcinogenic effects. We have no evidence of mutagenic or teratogenic effects.
12. Ecological information
The following applies to iodides in general: biological effects: crustaceans: D. magna EC50: 2.7 mg/l; protozoa: E.
sulcatum toxic from 40 mg/l up.
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Local Regulations
Within the UK, the use of this material must be assessed under the Control of Substances Hazardous to Health (COSHH)
regulations.
16. Other information
Revision.
Supercedes issue of 18/08/94
23. SAFETY DATA SHEET
Date of issue: 08/03/05
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Catalogue No:
Product name: Naturensbal m Gel for External application
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Solution in water
Product name: Iodine solutions
Povidone Iodine
CAS number:
<20%
25655-41-8
Sodium alginate
CAS number :
<20%
9005-38-3
3. Hazards identification
Not classified as dangerous according to EC Directives
4. First aid measures
- Eye contact: Irrigate thoroughly with water for at least 10 minutes. OBTAIN MEDICAL ATTENTION.
- Inhalation: Remove from exposure, rest and keep warm. In severe cases obtain medical attention.
- Skin contact: Wash off skin thoroughly with water. Remove contaminated clothing and wash before re-use.
- Ingestion: Wash out mouth thoroughly with water and give plenty of water to drink. OBTAIN MEDICAL ATTENTION.
5. Fire-fighting measures
Special risks:
May evolve toxic fumes in fire. (Iodine)
Suitable extinguishing media:
To suit environment.
6. Accidental release measures
Wear appropriate protective clothing.
24. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
Wash hands and face thoroughly after working with material. Contaminated clothing should be removed and washed
before re-use.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
OES, Iodine:
Short term: 1.1 mg/m3 (0.1 ppm)
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
Gel
brown
slightly pungent
Health, safety and environmental information:
Melting temperature
Boiling temperature
Solubility in water
Flash point
Explosion limits:
Auto-ignition temperature
lower:
10. Stability and reactivity
Not available
Not available
Miscible in all proportions
Not applicable
Not applicable
Not applicable
25. Stable.
No data
11. Toxicological information
- After inhalation: May irritate.
- After eye contact: local irritation symptoms
- After skin contact: May irritate.
- After ingestion: gastrointestinal symptoms
Further data
The following applies to iodides in general: sensitization with allergic manifestations in predisposed persons.
We have no evidence of carcinogenic effects. We have no evidence of mutagenic or teratogenic effects.
12. Ecological information
The following applies to iodides in general: biological effects: crustaceans: D. magna EC50: 2.7 mg/l; protozoa: E.
sulcatum toxic from 40 mg/l up.
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Local Regulations
Within the UK, the use of this material must be assessed under the Control of Substances Hazardous to Health (COSHH)
regulations.
16. Other information
Revision.
Supercedes issue of 18/08/94
26. SAFETY DATA SHEET
Date of issue: 08/03/05
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Catalogue No:
Product name: Naturensbal m Cavity Gel
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Solution in water
Product name: Iodine solutions
Povidone Iodine
CAS number:
<20%
25655-41-8
Sodium alginate
CAS number :
<20%
9005-38-3
3. Hazards identification
Not classified as dangerous according to EC Directives
4. First aid measures
- Eye contact: Irrigate thoroughly with water for at least 10 minutes. OBTAIN MEDICAL ATTENTION.
- Inhalation: Remove from exposure, rest and keep warm. In severe cases obtain medical attention.
- Skin contact: Wash off skin thoroughly with water. Remove contaminated clothing and wash before re-use.
- Ingestion: Wash out mouth thoroughly with water and give plenty of water to drink. OBTAIN MEDICAL ATTENTION.
5. Fire-fighting measures
Special risks:
May evolve toxic fumes in fire. (Iodine)
Suitable extinguishing media:
To suit environment.
6. Accidental release measures
Wear appropriate protective clothing.
27. If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
Wash hands and face thoroughly after working with material. Contaminated clothing should be removed and washed
before re-use.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
OES, Iodine:
Short term: 1.1 mg/m3 (0.1 ppm)
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
Gel
dark brown
slightly pungent
Health, safety and environmental information:
Melting temperature
Boiling temperature
Solubility in water
Flash point
Explosion limits:
Auto-ignition temperature
lower:
10. Stability and reactivity
Not available
Not available
Miscible in all proportions
Not applicable
Not applicable
Not applicable
28. Stable.
No data
11. Toxicological information
- After inhalation: May irritate.
- After eye contact: local irritation symptoms
- After skin contact: May irritate.
- After ingestion: gastrointestinal symptoms
Further data
The following applies to iodides in general: sensitization with allergic manifestations in predisposed persons.
We have no evidence of carcinogenic effects. We have no evidence of mutagenic or teratogenic effects.
12. Ecological information
The following applies to iodides in general: biological effects: crustaceans: D. magna EC50: 2.7 mg/l; protozoa: E.
sulcatum toxic from 40 mg/l up.
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Local Regulations
Within the UK, the use of this material must be assessed under the Control of Substances Hazardous to Health (COSHH)
regulations.
16. Other information
Revision.
Supercedes issue of 18/08/94
29. SAFETY DATA SHEET
Date of issue: 01-09-08
1. Identification of the substance/preparation and of the company/undertaking
Identification of the product
Product name: Naturensbal m RED Dye
Manufacturer/supplier identification
Company:
Naturensbalm Limited
17 Hackford Walk, 119-123 Hackford Road,
London, SW9 0QT,
UNITED KINGDOM
Emergency telephone No.: +44 (0)20 7582 1747
2. Composition/information on ingredients
Chemical characterization
Organic liquid
Product name: Naturensbalm RED Dye
CAS number: Not applicable
EC-No.: Mixture
Red Dye Dissolved in Purified water.
3. Hazards identification
Not classified as dangerous according to EC Directives.
4. First aid measures
- Eye contact: Irrigate thoroughly with water. If discomfort persists obtain medical attention.
- Inhalation: Remove from exposure.
- Skin contact: Wash off thoroughly with soap and water.
- Ingestion: Wash out mouth thoroughly with water. In severe cases obtain medical attention.
5. Fire-fighting measures
Special risks:
Combustible.
Suitable extinguishing media:
Water spray, foam, dry powder or carbon dioxide
6. Accidental release measures
Wear appropriate protective clothing.
If local regulations permit, mop up with plenty of water and run to waste, diluting greatly with running water. Otherwise
transfer to container and arrange removal by disposal company. Wash site of spillage thoroughly with detergent and water.
30. For large spillages liquids should be contained with sand or earth and both liquids and solids transferred to salvage
containers. Any residues should be treated as for small spillages.
7. Handling and storage
Handling:
No special precautions necessary.
Storage:
Store at room temperature (15 to 25°C recommended). Keep well closed and protected from direct sunlight and moisture.
8. Exposure controls/personal protection
UK Exposure Limits:
None assigned
Personal protective equipment:
As appropriate to the situation and the quantity handled.
- Respirator: Not applicable
- Ventilation: Not applicable
- Gloves: Rubber or plastic
- Eye Protection: Goggles or face-shield
- Other Precautions: Plastic apron, sleeves, boots - if handling large quantities
9. Physical and chemical properties
General information:
Form:
Colour:
Odour:
liquid
Dark Red
odourless
Health, safety and environmental information:
Melting temperature
Boiling temperature
Density(g/ml)
Solubility in water
pH value
Flash point
Explosion limits:
lower:
Auto-ignition temperature
10. Stability and reactivity
Stable.
Substances to be avoided
3°C
>250°C
1.000
Miscible in all proportions
7
245°C
No data
370°C
31. The possibility of reaction with other substances cannot be excluded.
11. Toxicological information
Very low acute toxicity in animal experiments. Hazardous properties are relatively improbable. The product should be
handled with the care usual when dealing with chemicals.
Further data
Non available
12. Ecological information
No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.
13. Disposal considerations
Chemical residues are generally classified as special waste, and as such are covered by regulations which vary according to
location. Contact your local waste disposal authority for advice, or pass to a chemical disposal company. Rinse out empty
containers thoroughly before returning for recycling.
14. Transport information
Not subject to transport regulations.
15. Regulatory information
Labelling according to EC directives
Not classified as dangerous according to EC Directives.
Local Regulations
16. Other information
Date of issue:
Date of print:
01/09/08
01/09/08