(1) Node-RED is a visual tool for developing IoT applications using a flow-based programming model. It has various connectors and can run flows immediately after wiring connectors in the processing order. (2) The document discusses how Node-RED has grown as an open source project since 2014 and is now used by major companies for IoT applications and services. (3) Node-RED enables rapid development of IoT solutions through its visual interface and support for standard IoT technologies like MQTT and REST APIs.
Node-RED is a visual tool for wiring together hardware devices, APIs, and online services to build IoT applications. It provides a browser-based drag-and-drop interface for creating flows that connect these different event sources. The lightweight runtime can run on edge devices or in the cloud and can be expanded through additional nodes. Node-RED uses flow-based programming and is open source with an active community.
Node-RED is a visual tool for wiring together hardware devices, APIs, and online services as part of the Internet of Things (IoT). It uses a flow-based programming model where applications are created by wiring together blocks in a graphical editor. The blocks represent functions that operate on messages and can be connected to route those messages between each other. Node-RED provides a browser-based editor that allows both programmers and non-programmers to visually create IoT applications by linking these blocks together without needing to know implementation details. It has a large library of add-on nodes and is open source, simple to deploy, and stores flows as JSON files that can easily be shared.
Keeping IoT stack in quality check - meetup IoT Under TestSilvair
Presentation from meetup "IoT Under Test" organized by Silvair. Łukasz shared with you:
✅ how testing IoT product differs from a simpler tech stack (and how it's similar)
✅ what's a good model of thinking about the quality
✅ how we @ Silvair approach challenges of Quality Assurance
Node-RED is a visual tool for wiring together hardware devices, APIs, and online services to build IoT applications. It provides a library of nodes that can be connected to access data from devices and sensors, perform analytics, and integrate with various online services like Twitter. While lightweight and easy to use for simple tasks, it is not intended as an enterprise application platform or mobile app builder. The document then provides examples of common Node-RED nodes and encourages the reader to try building a simple "Hello World" flow.
The document discusses starting a project to develop a libre connected car using free/open-source software (FLOSS) and open-source hardware (OSHW). It outlines existing automotive software projects like Tizen IVI and Automotive Grade Linux and the CANBus protocol. Developing a GNU/Linux-based prototyping solution and connecting it to sensors and radios using the IoTivity framework are proposed. Challenges include interfacing with motor controllers, embedding hardware in a vehicle, and creating map applications. Joining related open-source communities is encouraged.
This document provides an introduction to Node.js best practices for enterprise use. It discusses Node.js architecture and its focus on asynchronous, event-driven programming. Common patterns like web application frameworks and logging are described. The presentation recommends specific modules for tasks like HTTP requests. It also provides guidance on build processes, testing, security, performance and error handling for Node.js in production environments.
(1) Node-RED is a visual tool for developing IoT applications using a flow-based programming model. It has various connectors and can run flows immediately after wiring connectors in the processing order. (2) The document discusses how Node-RED has grown as an open source project since 2014 and is now used by major companies for IoT applications and services. (3) Node-RED enables rapid development of IoT solutions through its visual interface and support for standard IoT technologies like MQTT and REST APIs.
Node-RED is a visual tool for wiring together hardware devices, APIs, and online services to build IoT applications. It provides a browser-based drag-and-drop interface for creating flows that connect these different event sources. The lightweight runtime can run on edge devices or in the cloud and can be expanded through additional nodes. Node-RED uses flow-based programming and is open source with an active community.
Node-RED is a visual tool for wiring together hardware devices, APIs, and online services as part of the Internet of Things (IoT). It uses a flow-based programming model where applications are created by wiring together blocks in a graphical editor. The blocks represent functions that operate on messages and can be connected to route those messages between each other. Node-RED provides a browser-based editor that allows both programmers and non-programmers to visually create IoT applications by linking these blocks together without needing to know implementation details. It has a large library of add-on nodes and is open source, simple to deploy, and stores flows as JSON files that can easily be shared.
Keeping IoT stack in quality check - meetup IoT Under TestSilvair
Presentation from meetup "IoT Under Test" organized by Silvair. Łukasz shared with you:
✅ how testing IoT product differs from a simpler tech stack (and how it's similar)
✅ what's a good model of thinking about the quality
✅ how we @ Silvair approach challenges of Quality Assurance
Node-RED is a visual tool for wiring together hardware devices, APIs, and online services to build IoT applications. It provides a library of nodes that can be connected to access data from devices and sensors, perform analytics, and integrate with various online services like Twitter. While lightweight and easy to use for simple tasks, it is not intended as an enterprise application platform or mobile app builder. The document then provides examples of common Node-RED nodes and encourages the reader to try building a simple "Hello World" flow.
The document discusses starting a project to develop a libre connected car using free/open-source software (FLOSS) and open-source hardware (OSHW). It outlines existing automotive software projects like Tizen IVI and Automotive Grade Linux and the CANBus protocol. Developing a GNU/Linux-based prototyping solution and connecting it to sensors and radios using the IoTivity framework are proposed. Challenges include interfacing with motor controllers, embedding hardware in a vehicle, and creating map applications. Joining related open-source communities is encouraged.
This document provides an introduction to Node.js best practices for enterprise use. It discusses Node.js architecture and its focus on asynchronous, event-driven programming. Common patterns like web application frameworks and logging are described. The presentation recommends specific modules for tasks like HTTP requests. It also provides guidance on build processes, testing, security, performance and error handling for Node.js in production environments.
Blockchain Software for Hardware: The Canaan AvalonMiner Open Source Embedded...Mike Qin
The Canaan AvalonMiner 721 is hardware blockchain securing hardware technology built using Open Source software. The latest hardware AvalonMiner 721 contains 72 customized ASIC processors named Canaan A3212 which are harmonized together and then across potentially thousands of other AvalonMiners, to do SHA-256 hashing calculations.From the software toolchain all the way to OpenWrt used in Canaan's AvalonMiner Controller, this presentation describes the entire process from start to finish how the software is built, developed, launched and maintained. Of specific interest are the contributions by Canaan back to the Open Source community, including to CGMiner, OpenWRT and other projects.
Rapid IoT Prototyping with Tizen on Raspberry PiLeon Anavi
This document discusses rapid IoT prototyping using Tizen on Raspberry Pi. It provides an overview of Tizen and Raspberry Pi, describes how to build Tizen for Raspberry Pi using Yocto Project tools, and discusses connecting sensors and communicating between IoT devices. It also presents examples of open source hardware add-on boards that can be designed for Raspberry Pi to create IoT prototypes.
Tech talk with Antmicro - Building an open source system verilog ecosystemRISC-V International
This document discusses building an open source SystemVerilog ecosystem. It outlines Antmicro's work in tools, hardware, software and AI for the RISC-V ecosystem. It describes the need for open source SystemVerilog support in tools to enable collaborative design. Efforts discussed include developing an SV compliance test suite, the open source Verible linter/formatter, the Surelog parser, and integrating the Universal Hardware Data Model interface in other tools like Verilator and Yosys. The goal is to extend open source tools with SV features and create reusable solutions.
This document provides an overview of the Raspberry Pi, a credit-card sized computer intended for use in electronics projects and learning programming. It describes the Raspberry Pi's capabilities and components, demonstrates some sample code for interacting with its GPIO pins, and references additional online resources for using and programming the Raspberry Pi. The presentation includes an agenda, descriptions of the Raspberry Pi models, its architecture, programming tools like Python and Scratch, and a questions slide.
The internet of things in now , see how golang is a part of this evolutionYoni Davidson
This document discusses how Golang can help with Internet of Things (IoT) development. It summarizes that IoT development requires skills in many areas, from embedded programming to backend development, which makes it challenging. Golang can help unify development by allowing code to run natively on devices and be used for both device and backend code, simplifying context switching. It also discusses examples of using Golang with IoT, including a code sample accessing a webcam from a Raspberry Pi. Recommended Golang packages for IoT are also listed.
Philippe Coval from Samsung Open Source Group discusses how the automotive industry is becoming more data-driven and connected. The Open Connectivity Foundation is working to provide common standards and open-source implementations for interconnecting Internet of Things devices across different domains, including smart home, automotive, and beyond. IoTivity is an open-source project that implements OCF specifications to allow devices to communicate in a common way. OCF aims to define common resources and interfaces for connected cars to ensure interoperability.
Amora is a mobile remote assistant created in 2007 to provide a free and open-source alternative to remote controllers that were abandoned, unstable, had poor performance and usability, and only supported Windows. It was created using C, Python, and other open-source tools. The small project involved 6 people over 2.5 months and implemented a Bluetooth protocol to remotely control and capture screenshots from a desktop. Further contributions were welcomed to expand its packaging, add tablet and mobile clients, and integrate new features.
Session ID: HKG18-312
Session Name: HKG18-312 - CMSIS-NN
Speaker: Rod Crawford
Track: LEG;Ecosystem Day
★ Session Summary ★
Deep learning algorithms are gaining popularity in IoT edge devices, because of their human-level accuracy in many applications, such as image classification and speech recognition. There is an increasing interest in deploying neural networks (NN) on always-on systems such as Arm Cortex-M microcontrollers. In this session, we introduce the challenges of deploying neural networks on microcontrollers with limited memory/compute resources and power budget. We introduce CMSIS-NN, optimized software kernels to enable deployment of neural networks on Cortex-M cores. We further present NN architecture exploration, using keyword spotting application as an example, to develop light-weight models suitable for resource constrained systems.
---------------------------------------------------
★ Resources ★
Event Page: http://connect.linaro.org/resource/hkg18/hkg18-312/
Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-312.pdf
Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-312.mp4
---------------------------------------------------
★ Event Details ★
Linaro Connect Hong Kong 2018 (HKG18)
19-23 March 2018
Regal Airport Hotel Hong Kong
---------------------------------------------------
Keyword: LEG;Ecosystem Day
'http://www.linaro.org'
'http://connect.linaro.org'
---------------------------------------------------
Follow us on Social Media
https://www.facebook.com/LinaroOrg
https://www.youtube.com/user/linaroorg?sub_confirmation=1
https://www.linkedin.com/company/1026961
This document summarizes a presentation given by Samsung on the Open Interconnect Consortium (OIC) and its collaboration with the Automotive Grade Linux (AGL) project. Some key points:
- OIC is an open source consortium formed in 2014 with the vision of connecting 50 billion devices through an open and interoperable standard for device discovery and connectivity. It has over 165 members including Samsung, Intel, Cisco and GE.
- OIC develops specifications and a reference open source implementation called IoTivity. IoTivity provides functionality for device discovery, data transmission, security and more.
- Samsung demonstrated OIC and AGL integration at CES 2016, showing control of an OIC device from
Building a Remote Control Robot with Automotive Grade LinuxLeon Anavi
Automotive Grade Linux (AGL) is a leading embedded Linux distribution for the automotive industry and soon it will debut on the 2018 Toyota Camry. Out of the box AGL offers reliable open source solutions for graphics, connectivity, security and software over the air updates. Could other industries benefit from these features?
In a quest to discover if AGL is suitable for Internet of Things (IoT) outside the automotive industry, this presentation will reveal a practical experiment of using AGL in robotics. Attendees will learn the exact steps for building a do it yourself (DIY) robot based on Raspberry Pi 3 with off-the-shelf components. The talk will provide guidelines for integration of additional software, sensors and other peripheral hardware device in a headless AGL profile.
This document discusses Samsung's work with open source projects like Tizen and IoTivity to develop Internet of Things (IoT) technologies. It describes how IoTivity provides a framework for seamless device connectivity and interoperability using open standards and security. The document outlines examples of building an IoT server on a Raspberry Pi device running Tizen to share GPS data, and creating IoT clients on Tizen mobile and wearable devices to display the GPS information. It also references additional showcases of using IoTivity to control devices over IP networks and bridge to automotive standards. The goal is to make IoT development accessible to developers through open platforms and affordable hardware.
The document discusses developing applications for the PolarFire® System on Chip (SoC) field programmable gate array (FPGA). It notes that developing for the PolarFire SoC is less complicated than it seems. It covers the functionality of the application and monitor cores, how to develop bare metal applications using SoftConsole IDE, and how to develop FPGA applications using the Libero SoC Design Suite. Examples of driver code and build systems are also provided to simplify the development process for the PolarFire SoC.
High Performance Computing (HPC)
The HPC SIG was officially launched at Linaro Connect Las Vegas in September 2016 to drive the adoption of ARM in HPC through the creation of a data center ecosystem. It is a collaborative project comprised of members and an advisory board. Current members include ARM, HiSilicon, Qualcomm, Fujitsu, Cavium, Red Hat and HPE. CERN and Riken are on the advisory board.
https://www.linaro.org/sig/hpc/
Contributing to Automotive Grade Linux (AGL) and GENIVI Development Platform ...Leon Anavi
Presentation from Embedded Linux Conference 2017 in Portland, Oregon (21-23 February) about contributing to Automotive Grade Linux (AGL) and GENIVI Development Platform (GDP).
This document discusses online code sharing platforms for physical computing. It introduces the Funnel toolkit, which allows connecting different hardware toolkits like Gainer and Arduino. Funnel supports languages like Processing and ActionScript. The document outlines recent contributions to Funnel, including support for new hardware, libraries for interfacing with I2C devices, and a collaboration with Wonderfl to provide an online code editor for physical computing. It raises questions about how to better support students in prototyping and how to incentivize engineers to participate in open hardware projects.
Blockchain Software for Hardware: The Canaan AvalonMiner Open Source Embedded...Mike Qin
The Canaan AvalonMiner 721 is hardware blockchain securing hardware technology built using Open Source software. The latest hardware AvalonMiner 721 contains 72 customized ASIC processors named Canaan A3212 which are harmonized together and then across potentially thousands of other AvalonMiners, to do SHA-256 hashing calculations.From the software toolchain all the way to OpenWrt used in Canaan's AvalonMiner Controller, this presentation describes the entire process from start to finish how the software is built, developed, launched and maintained. Of specific interest are the contributions by Canaan back to the Open Source community, including to CGMiner, OpenWRT and other projects.
Rapid IoT Prototyping with Tizen on Raspberry PiLeon Anavi
This document discusses rapid IoT prototyping using Tizen on Raspberry Pi. It provides an overview of Tizen and Raspberry Pi, describes how to build Tizen for Raspberry Pi using Yocto Project tools, and discusses connecting sensors and communicating between IoT devices. It also presents examples of open source hardware add-on boards that can be designed for Raspberry Pi to create IoT prototypes.
Tech talk with Antmicro - Building an open source system verilog ecosystemRISC-V International
This document discusses building an open source SystemVerilog ecosystem. It outlines Antmicro's work in tools, hardware, software and AI for the RISC-V ecosystem. It describes the need for open source SystemVerilog support in tools to enable collaborative design. Efforts discussed include developing an SV compliance test suite, the open source Verible linter/formatter, the Surelog parser, and integrating the Universal Hardware Data Model interface in other tools like Verilator and Yosys. The goal is to extend open source tools with SV features and create reusable solutions.
This document provides an overview of the Raspberry Pi, a credit-card sized computer intended for use in electronics projects and learning programming. It describes the Raspberry Pi's capabilities and components, demonstrates some sample code for interacting with its GPIO pins, and references additional online resources for using and programming the Raspberry Pi. The presentation includes an agenda, descriptions of the Raspberry Pi models, its architecture, programming tools like Python and Scratch, and a questions slide.
The internet of things in now , see how golang is a part of this evolutionYoni Davidson
This document discusses how Golang can help with Internet of Things (IoT) development. It summarizes that IoT development requires skills in many areas, from embedded programming to backend development, which makes it challenging. Golang can help unify development by allowing code to run natively on devices and be used for both device and backend code, simplifying context switching. It also discusses examples of using Golang with IoT, including a code sample accessing a webcam from a Raspberry Pi. Recommended Golang packages for IoT are also listed.
Philippe Coval from Samsung Open Source Group discusses how the automotive industry is becoming more data-driven and connected. The Open Connectivity Foundation is working to provide common standards and open-source implementations for interconnecting Internet of Things devices across different domains, including smart home, automotive, and beyond. IoTivity is an open-source project that implements OCF specifications to allow devices to communicate in a common way. OCF aims to define common resources and interfaces for connected cars to ensure interoperability.
Amora is a mobile remote assistant created in 2007 to provide a free and open-source alternative to remote controllers that were abandoned, unstable, had poor performance and usability, and only supported Windows. It was created using C, Python, and other open-source tools. The small project involved 6 people over 2.5 months and implemented a Bluetooth protocol to remotely control and capture screenshots from a desktop. Further contributions were welcomed to expand its packaging, add tablet and mobile clients, and integrate new features.
Session ID: HKG18-312
Session Name: HKG18-312 - CMSIS-NN
Speaker: Rod Crawford
Track: LEG;Ecosystem Day
★ Session Summary ★
Deep learning algorithms are gaining popularity in IoT edge devices, because of their human-level accuracy in many applications, such as image classification and speech recognition. There is an increasing interest in deploying neural networks (NN) on always-on systems such as Arm Cortex-M microcontrollers. In this session, we introduce the challenges of deploying neural networks on microcontrollers with limited memory/compute resources and power budget. We introduce CMSIS-NN, optimized software kernels to enable deployment of neural networks on Cortex-M cores. We further present NN architecture exploration, using keyword spotting application as an example, to develop light-weight models suitable for resource constrained systems.
---------------------------------------------------
★ Resources ★
Event Page: http://connect.linaro.org/resource/hkg18/hkg18-312/
Presentation: http://connect.linaro.org.s3.amazonaws.com/hkg18/presentations/hkg18-312.pdf
Video: http://connect.linaro.org.s3.amazonaws.com/hkg18/videos/hkg18-312.mp4
---------------------------------------------------
★ Event Details ★
Linaro Connect Hong Kong 2018 (HKG18)
19-23 March 2018
Regal Airport Hotel Hong Kong
---------------------------------------------------
Keyword: LEG;Ecosystem Day
'http://www.linaro.org'
'http://connect.linaro.org'
---------------------------------------------------
Follow us on Social Media
https://www.facebook.com/LinaroOrg
https://www.youtube.com/user/linaroorg?sub_confirmation=1
https://www.linkedin.com/company/1026961
This document summarizes a presentation given by Samsung on the Open Interconnect Consortium (OIC) and its collaboration with the Automotive Grade Linux (AGL) project. Some key points:
- OIC is an open source consortium formed in 2014 with the vision of connecting 50 billion devices through an open and interoperable standard for device discovery and connectivity. It has over 165 members including Samsung, Intel, Cisco and GE.
- OIC develops specifications and a reference open source implementation called IoTivity. IoTivity provides functionality for device discovery, data transmission, security and more.
- Samsung demonstrated OIC and AGL integration at CES 2016, showing control of an OIC device from
Building a Remote Control Robot with Automotive Grade LinuxLeon Anavi
Automotive Grade Linux (AGL) is a leading embedded Linux distribution for the automotive industry and soon it will debut on the 2018 Toyota Camry. Out of the box AGL offers reliable open source solutions for graphics, connectivity, security and software over the air updates. Could other industries benefit from these features?
In a quest to discover if AGL is suitable for Internet of Things (IoT) outside the automotive industry, this presentation will reveal a practical experiment of using AGL in robotics. Attendees will learn the exact steps for building a do it yourself (DIY) robot based on Raspberry Pi 3 with off-the-shelf components. The talk will provide guidelines for integration of additional software, sensors and other peripheral hardware device in a headless AGL profile.
This document discusses Samsung's work with open source projects like Tizen and IoTivity to develop Internet of Things (IoT) technologies. It describes how IoTivity provides a framework for seamless device connectivity and interoperability using open standards and security. The document outlines examples of building an IoT server on a Raspberry Pi device running Tizen to share GPS data, and creating IoT clients on Tizen mobile and wearable devices to display the GPS information. It also references additional showcases of using IoTivity to control devices over IP networks and bridge to automotive standards. The goal is to make IoT development accessible to developers through open platforms and affordable hardware.
The document discusses developing applications for the PolarFire® System on Chip (SoC) field programmable gate array (FPGA). It notes that developing for the PolarFire SoC is less complicated than it seems. It covers the functionality of the application and monitor cores, how to develop bare metal applications using SoftConsole IDE, and how to develop FPGA applications using the Libero SoC Design Suite. Examples of driver code and build systems are also provided to simplify the development process for the PolarFire SoC.
High Performance Computing (HPC)
The HPC SIG was officially launched at Linaro Connect Las Vegas in September 2016 to drive the adoption of ARM in HPC through the creation of a data center ecosystem. It is a collaborative project comprised of members and an advisory board. Current members include ARM, HiSilicon, Qualcomm, Fujitsu, Cavium, Red Hat and HPE. CERN and Riken are on the advisory board.
https://www.linaro.org/sig/hpc/
Contributing to Automotive Grade Linux (AGL) and GENIVI Development Platform ...Leon Anavi
Presentation from Embedded Linux Conference 2017 in Portland, Oregon (21-23 February) about contributing to Automotive Grade Linux (AGL) and GENIVI Development Platform (GDP).
This document discusses online code sharing platforms for physical computing. It introduces the Funnel toolkit, which allows connecting different hardware toolkits like Gainer and Arduino. Funnel supports languages like Processing and ActionScript. The document outlines recent contributions to Funnel, including support for new hardware, libraries for interfacing with I2C devices, and a collaboration with Wonderfl to provide an online code editor for physical computing. It raises questions about how to better support students in prototyping and how to incentivize engineers to participate in open hardware projects.
Summit 16: NetIDE: Integrating and Orchestrating SDN ControllersOPNFV
NetIDE is a EU-funded project that is known to the OpenDaylight community, because we have contributed a component to the Beryllium release. However, the full NetIDE ecosystem is much more. It is an extended SDN controller framework that allows users to cherry-pick the best of breed both for the network facing controller and the SDN framework for applications. In addition it provides an application composition engine that allows network operators to introduce software development concepts like code reusability in their production cycle. In this talk, I will introduce the whole Network Engine as well as the NetIDE Eclipse plugin that allows us to create SDN applications, test them and run them on the NetIDE engine and reflect on why we contributed what we contributed to OpenDaylight.
What is cool with Domino V10, Proton and Node.JS, and why would I use it in ...Heiko Voigt
This document discusses using Node.js, React, and Express with Domino V10. It provides an overview of a demo that uses these technologies to build a survey application with a real-time dashboard. The demo includes a Notes/iPad app for surveys, a React frontend, a Node.js/Express REST API, and a Node.js/Socket.io real-time backend. It discusses the benefits of this approach, including scalability, flexibility, and reusability. It also provides recommendations for tooling and resources for learning more.
This document provides an overview of OpenFrameworks for Flash developers. It includes:
1. An introduction to OpenFrameworks and how it can be used to create C++ applications with less hassle than traditional methods.
2. A breakdown of the basic structure of an OpenFrameworks application including the main classes and functions.
3. Step-by-step explanations of three example OpenFrameworks projects that create circles, an animation, and particles.
4. Additional resources for learning more about OpenFrameworks, creative coding, and getting involved in the OpenFrameworks community.
Python is a popular programming language that can be used for a variety of tasks such as web development, software development, mathematics, and system scripting. It is an interpreted, object-oriented, high-level programming language with dynamic semantics. Python has a simple syntax and is easy to learn, which has contributed to its popularity among developers. It has a large standard library and supports many third-party libraries for specialized tasks.
Kivy is open source Module or platform to develop cross platform application in python. it supports python 2 and python 3 both. It is fully implemented in Cython (python library to write c code)
GlueCon 2015 - How REST APIs can glue all types of devices togetherRestlet
An exploding variety of devices need to communicate with the software you're developing today or soon in the future. What's your plan to handle access from mobile phones, thermostats, heart rate monitors, health and temp sensors, desktop computers, tablets, smart watches, and more? The key to gluing everything together is to use APIs. Data and code logic can be published as APIs, making your application much more flexible. In this session, Jerome will do a technical deep into how to use open source and free to-use tools for API design, development, management, deployment, version control, and documentation. He will also explain the acute problem with API management today, evolution, and future direction.
Python Introduction its a oop language and easy to useSrajanCollege1
This document provides an introduction to Python and data visualization using Python. It discusses that Python is a high-level, interpreted, interactive and object-oriented scripting language used for software, website and app development. It then covers why Python is easy to learn and maintain, and has a broad standard library. The document lists different Python versions and popular Python IDEs. It also introduces basic Python programs, data types, operators, functions, conditional statements, loops, lists, tuples, dictionaries, and concludes with examples of data visualization using Matplotlib and collecting historical stock data for visualization.
Jfokus_Bringing the cloud back down to earth.pptxGrace Jansen
How can we effectively develop for the cloud, when we as developers are coding back down on earth? This is where effective cloud-native developer tools can enable us to either be transported into the cloud or alternatively, to bring the cloud back down to earth. But what tools should we be using for this? In this session, we’ll explore some of the useful OSS tools and technologies that can used by developers to effectively develop, design and test cloud-native Java applications.
This document provides an overview of Xcode and highlights some tips for using it efficiently:
- Xcode is Apple's integrated development environment for developing Mac and iOS apps. It includes tools for building, debugging, and optimizing code.
- Some tips for efficient navigation in Xcode include using keyboard shortcuts, customizing shortcuts, and navigating with the mouse.
- Code reuse can be achieved by importing one project into another to create dependencies between targets and share build settings.
- Automating tasks through scripts can help deploy apps faster by streamlining processes like removing headers and uploading builds.
Open Source Tools for Making Open Source HardwareLeon Anavi
Is it worth making open source hardware using expensive proprietary software tools? Of course not! There are many open source software tools good enough for the job. In this presentation Leon Anavi will share his experience in combining open source hardware with free and open source software for fun and profit.
Peter Tao is a full-stack software developer and computer science student at the University of Toronto. He has work experience as a software developer co-op at Ceridian where he implemented components in their software. He also worked as a full-stack developer at Futurera where he built a full-stack website for student organizations. His projects include building a social media web app using MERN stack, a Rubik's Cube solver desktop app, a translation Android app, and a photo manager desktop app.
FooConf23_Bringing the cloud back down to earth.pptxGrace Jansen
How can we effectively develop for the cloud, when we as developers are coding back down on earth? This is where effective cloud-native developer tools can enable us to either be transported into the cloud or alternatively, to bring the cloud back down to earth. But what tools should we be using for this? In this session, we’ll explore some of the useful OSS tools and technologies that can used by developers to effectively develop, design and test cloud-native Java applications.
Peripheral Programming using Arduino and Python on MediaTek LinkIt Smart 7688...MediaTek Labs
Want to add Wi-Fi to your IoT project? This 30 minute webinar, presented by technical consultant Ajith KP, demonstrated how to program (using Arduino and Python) for peripheral sensors connected to the MediaTek LinkIt Smart 7688 Duo’s microcontroller and how to communicate between the microcontroller and the MT7688 SOC.
Three ways to undertake the peripheral programming for the MediaTek LinkIt Smart 7688 Duo were covered:
1) Using a primitive UART connection
2) Using the Firmata protocol
3) Using the Arduino Yun Bridge Library
A recording of the live event can be found at http://home.labs.mediatek.com/technical-mediatek-linkit-smart-7688-webinar-recording-available/
Today, there are many companies that are open to the idea of sharing and actively promote Open Source projects.
We, at Neev, not only promote Open Source, but actively utilize Open Source wherever possible in order to increase ROI for customers and decrease time-to-market.
It is the best way to give something back to the community. Neev has, from time-to-time, given back to the Open Source community through contributions that aim to solve critical issues faced by the IT community.
Here are 18 of our innovative Open Source tools.
Python can be used to create 2D and 3D games. For 2D games, popular frameworks include Rabbyt, Kivy, and Pyglet. Rabbyt allows easy creation of sprites, Kivy supports mobile development and has extensive input support, and Pyglet provides multimedia capabilities. For 3D games, popular engines written for Python include Blender, which includes both modeling and a game engine, Panda3D which uses Python as its development language, and Crystal Space, a general 3D framework.
Open collaboration in the Moby ProjectAkihiro Suda
The Moby Project is a collaborative open-source project launched by Docker, Inc. to promote software containerization.
The Moby Project provides a "lego set" of components that can be assembled into custom downstream container systems such as Docker.
Akihiro Suda, a maintainer of Moby, Moby BuildKit, and containerd, shows how the community has been collaborating in the Moby Project.
He also shows how the Moby Project relates to Docker, OCI, and CNCF projects such as Kubernetes.
http://events.linuxfoundation.org/events/open-source-forum
Essentially, IDE is a software development utility program. The features of a tool can be used for growing and locating out the utility software program application.
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
2. • Hitachi is using Node-RED in our IoT platform, "Lumada“.
• To add new features and improve quality of code,
we joined Node-RED community as a contributor.
Why does Hitachi contribute to Node-RED?
1
https://js.foundation/announcements/2017/08/09/hitachi-announces-commitment-to-node-red
3. • We have contributed to Node-RED since February 2017.
• We added 151 commits and 16,620 lines of code.
• On GitHub, there‘re 5 contributors from Hitachi.
How much has Hitachi contributed to Node-RED?
2
https://github.com/node-red
4. (1) Projects feature
• New functionality to manage flows
using version control
• Mr. Nakamura helped Nick
with the functionality
(2) Message sequence nodes
• To handle sequence of messages,
Dr. Nishiyama added new nodes
and their enhancements
What feature did Hitachi contribute to?
3
Hideki
Nakamura
Hiroyasu
Nishiyama
Nick O'Leary
(IBM)
5. (3) Customizing a node's icon
• Mr. Nakanishi added the feature
to change icon of node on flow editor
(4) Internationalization of flow editor
• We translated English messages on
flow editor with other contributors
What feature did Hitachi contribute to?
4
Qi Xiu
Kazuhito
Yokoi
Kazuki
Nakanishi
Change icon
+ Other contributors
Chinese and Japanese
support on flow editor
6. (1) Context backend plugin
• To keep data when Node-RED restarts,
Mr. Uchikawa is developing context storage
(2) Node generator
• Using the tool, users can easily
create original nodes from Swagger or
JavaScript code in function node
What are the next contributions from Hitachi?
5
Kazuhito
Yokoi
Hiroki
Uchikawa
Takaya
Ide
Swagger
definition
Swagger
node
Exportable
function node
Generate
nodes
Source Original nodes
+ Other contributorshttps://github.com/node-red/node-red-nodegen
7. • We published 5,000 copies
of Node-RED book in Japan.
• Contents
(1) Create your original
application by your own!
(2) What is a "program"?
(3) You can create programs
easily with Node-RED
(4) First Node-RED flow
(5) What kind of nodes
can you use?
(6) Let’s create useful flows
Node-RED book from Hitachi
6
http://amzn.asia/hQBvEIK
8. • Slack
https://nodered.org/slack/
• Google groups
https://groups.google.com/forum/#!forum/node-red
Join Node-RED community
7
For discussions, there’re Slack and Google Groups in community.
9. Trademarks
8
• GitHub is a registered trademark of GitHub Incorporated.
• Slack is a registered trademark of Slack Technologies, Inc.
• Google is a registered trademark of Google, Inc.
Editor's Notes
Good morning everyone. I’m very glad to be here today.
My name is Kazuhito Yokoi from Hitachi and I am one of contributors to Node-RED.
Today, I would like to talk about Hitachi’s contributions to Node-RED project.
First of all, I will explain why Hitachi contributes to Node-RED.
We are using Node-RED in our IoT platform, “Lumada”.
To add new features and improve quality of code, we joined the Node-RED community as a contributor.
As you can see on JS Foundation blog, there is the announcement about it.
Next, let me talk about how much Hitachi has contributed to the Node-RED project.
We started our contributions last year.
In just a year, we were able to add over one hundred commits and sixteen thousand lines of code.
On the GitHub page, there are five contributors from Hitachi.
From this slide, I will explain about Hitachi’s current and future contributions to the Node-RED project.
The following are current contributions.
The first is project feature. The new functionality in version zero point eighteen is to manage flows using version control.
Nick developed the functionality with the help of Mr. Nakamura.
The second is message sequence nodes.
As shown on the palette in version zero point eighteen, you can use sort and batch nodes.
To handle sequence of messages, Dr. Nishiyama added these nodes.
Third is customizing a node’s icon.
In version zero point eighteen, users can customize the node’s icons according to their needs.
Mr. Nakanishi developed the function.
Forth is internationalization of flow editor.
If you change your browser language to Japanese, you can see Japanese messages on the flow editor.
Currently Chinese language is also supported on the flow editor.
Mr. Xiu and I translated English messages into Japanese and Chinese with the assistance of other contributors in Node-RED community.
With this function, I hope that Japanese and Chinese users will increase.
This slide shows the future contributions from Hitachi.
The first is context backend plugin.
To keep data when Node-RED instance restarts, Mr. Uchikawa is developing the function.
The second is node generator.
Using the tool, users can easily create original nodes from Swagger definition and JavaScript code in function node.
Mr. Ide and I are developing a command line tool with other contributors.
If you are interested in the tool, please refer to the URL, node-red-nodegen under the Node-RED project.
And we published five thousand copies of Node-RED book in Japan.
Today, I brought ten copies of Node-RED book as giveaways.
Please approach me after my presentation if you want to get it.
Finally I’d like to introduce how to join the Node-RED community.
For discussion, there are the Slack and Google Groups in community.
If you want to get updates about Node-RED, you can join the community through Node-RED website.
Thank you for your listening. Have a nice day.