Continuous lap placket
•
0 likes•455 views
This document provides instructions for creating a continuous lap sleeve placket for blouses or shirts with long sleeves. It describes cutting a lap band that is double the length of the placket opening plus half an inch wide. The placket opening on the sleeve is reinforced and slashed. The lap band is then stitched to the placket opening, catching just a few threads at the tip. The lap band is folded and pressed to finish the placket.
Report
Share
Report
Share
Download to read offline
Recommended
Blusa Burda
The document provides instructions for altering the BurdaStyle JJ blouse pattern to create a short-sleeved blouse with a pleated front bib. It describes how to cut and prepare the pattern pieces, including pleating the front bib fabric. It then provides step-by-step sewing instructions to construct the blouse fronts, back, collar, sleeves, and complete the garment. Notions include fashion fabric, interfacing, and buttons.
Dressing and bandaging
This document provides instructions for dressing and bandaging the scrotum. It outlines the principles, necessary items, and procedure. The key steps are:
1. Clean the wound site and apply layers of gauze and povidone iodine if needed.
2. Begin wrapping a circular bandage around the hip and bring it under the scrotum while applying tension but not too tight.
3. Continue wrapping in an upward motion while molding the material and securing it on both sides of the hip. Make cuts for the penis as needed.
4. The finished bandage should cover and conform to the scrotal area while allowing for patient comfort.
Bandages
This manual provides guidance on bandaging and splinting techniques for medical personnel. It aims to instruct them on proper bandage application through diagrams and descriptions of different bandage types. Constant practice is emphasized as the techniques require quick and correct performance. Roller bandages and triangular bandages are discussed in detail, with triangular bandages being useful for first aid due to their versatility and easy application. Correct bandage application is important to aid patient recovery and avoid discomfort or medical issues.
How to tie a tie (the simple knot oriental knot)
This document provides instructions for tying a basic tie knot in 6 steps: 1) Position the tie with the wide end on the right and small end slightly above the belly button. 2) Bring the wide end under the small end to the left. 3) Bring the wide end across the small end to the right. 4) Bring the wide end up into a loop from underneath at the neck. 5) Bring the wide end down through the loop in the front. 6) Pull the wide end to tighten the knot and slide it up to adjust.
How to turn a sweater into a sweater dress
The document provides instructions for turning an old wool sweater into a sweater dress by cutting the sleeves off the sweater, cutting the top portion away from the bottom, sewing the top and bottom portions together with pleats added to the bottom for shape and fullness, and finishing it off by sewing in the sides and a new label.
COLLARS
WHEN FINISHING THE NECKLINE EDGE OF A GARMENT, THE DESIGNER CAN CHOOSE TO ATTACH A COLLAR. THE SLIDES HIGHLIGHTS ON THE TYPES OF COLLARS AND HOW TO ATTACH THEM.
Bandaging and dressing
This document provides information on types of wounds, dressings, bandages, and bandaging techniques. It discusses abrasions, lacerations, puncture wounds, and other types of wounds. It describes adhesive dressings and gauze dressings that are used to cover wounds. The major types of bandages are roller, tubular, and triangular bandages, which are used to cover wounds, control bleeding, or support injuries. Basic bandaging forms include circular, spiral, figure-of-eight, recurrent, and reverse spiral techniques. The document provides guidance on selecting the appropriate materials and applying bandages to specific body parts.
Ruffle Hem Skirt
The perfect pretty little skirt.
A subtle ruffle hem and a simple elastic waistband make this skirt a sweet and easy project.
It's multi-sized, with no pattern pieces. Just fill out the simple worksheet to measure, calculate, and cut.
Choose your favorite fabric and have fun sewing!
Recommended
Blusa Burda
The document provides instructions for altering the BurdaStyle JJ blouse pattern to create a short-sleeved blouse with a pleated front bib. It describes how to cut and prepare the pattern pieces, including pleating the front bib fabric. It then provides step-by-step sewing instructions to construct the blouse fronts, back, collar, sleeves, and complete the garment. Notions include fashion fabric, interfacing, and buttons.
Dressing and bandaging
This document provides instructions for dressing and bandaging the scrotum. It outlines the principles, necessary items, and procedure. The key steps are:
1. Clean the wound site and apply layers of gauze and povidone iodine if needed.
2. Begin wrapping a circular bandage around the hip and bring it under the scrotum while applying tension but not too tight.
3. Continue wrapping in an upward motion while molding the material and securing it on both sides of the hip. Make cuts for the penis as needed.
4. The finished bandage should cover and conform to the scrotal area while allowing for patient comfort.
Bandages
This manual provides guidance on bandaging and splinting techniques for medical personnel. It aims to instruct them on proper bandage application through diagrams and descriptions of different bandage types. Constant practice is emphasized as the techniques require quick and correct performance. Roller bandages and triangular bandages are discussed in detail, with triangular bandages being useful for first aid due to their versatility and easy application. Correct bandage application is important to aid patient recovery and avoid discomfort or medical issues.
How to tie a tie (the simple knot oriental knot)
This document provides instructions for tying a basic tie knot in 6 steps: 1) Position the tie with the wide end on the right and small end slightly above the belly button. 2) Bring the wide end under the small end to the left. 3) Bring the wide end across the small end to the right. 4) Bring the wide end up into a loop from underneath at the neck. 5) Bring the wide end down through the loop in the front. 6) Pull the wide end to tighten the knot and slide it up to adjust.
How to turn a sweater into a sweater dress
The document provides instructions for turning an old wool sweater into a sweater dress by cutting the sleeves off the sweater, cutting the top portion away from the bottom, sewing the top and bottom portions together with pleats added to the bottom for shape and fullness, and finishing it off by sewing in the sides and a new label.
COLLARS
WHEN FINISHING THE NECKLINE EDGE OF A GARMENT, THE DESIGNER CAN CHOOSE TO ATTACH A COLLAR. THE SLIDES HIGHLIGHTS ON THE TYPES OF COLLARS AND HOW TO ATTACH THEM.
Bandaging and dressing
This document provides information on types of wounds, dressings, bandages, and bandaging techniques. It discusses abrasions, lacerations, puncture wounds, and other types of wounds. It describes adhesive dressings and gauze dressings that are used to cover wounds. The major types of bandages are roller, tubular, and triangular bandages, which are used to cover wounds, control bleeding, or support injuries. Basic bandaging forms include circular, spiral, figure-of-eight, recurrent, and reverse spiral techniques. The document provides guidance on selecting the appropriate materials and applying bandages to specific body parts.
Ruffle Hem Skirt
The perfect pretty little skirt.
A subtle ruffle hem and a simple elastic waistband make this skirt a sweet and easy project.
It's multi-sized, with no pattern pieces. Just fill out the simple worksheet to measure, calculate, and cut.
Choose your favorite fabric and have fun sewing!
Instructions front
This document provides instructions for applying Rocktape to different areas of the body for injuries such as shin splints, plantar fasciitis, Achilles tendon pain, and more. It describes how to anchor the tape, whether to stretch the middle of the tape or not, and optional techniques. General instructions are given such as applying to clean dry skin before exercise and storing the tape properly. The goal is to provide endurance tape for athletes and sport taping applications.
Bandaging
Bandaging involves covering wounds or injuries to provide support, immobilization, and protection. Common bandage materials include cotton, gauze, and elastic bandages. The appropriate bandage type and size depends on the body part and purpose. Proper bandaging techniques such as padding bony areas and applying pressure evenly without restricting circulation are important to promote healing and prevent further injury. Splints are rigid structures used to immobilize fractures and dislocations by preventing movement at the injury site. Common splints include the Thomas splint for femur fractures and Bohler-Braun splint for skeletal traction of femoral fractures.
SEAMS AND THEIR TYPES
This document discusses different types of seams used in garment construction. It begins by defining a seam as a method of joining two pieces of fabric together. There are several types of seams that are used for different purposes, including plain seams, double top seams, French seams, flat fell seams, welt seams, lapped seams, and piped and slot seams. Each seam type is described in terms of how it is constructed and what types of fabrics it is best suited for. Seams are an essential element of garment construction as they join fabric pieces together to create finished garments and accessories.
Pleats - Types and purpose.
There are several types of pleats that are used in clothing and upholstery to gather fabric. The main types are accordion pleats, knife pleats, box pleats, and inverted pleats. Pleats add extra room and allow fabric to move, gathering a wide piece of fabric into a narrower space. Their main purpose is functionality - pleats allow for more freedom of movement and prevent tightening and creasing, especially in areas like the hips when sitting. Pleats can be found on many different garments and accessories.
PLEATS......
This document is an assignment on pleats by Shubhi Goel for their 3rd semester B.Sc. in Fashion Designing & Technology. It defines pleats as folds made by doubling fabric back on itself and securing it in place, which are used to gather fabric. Pleats can be pressed or unpressed. The document discusses the history of pleating in ancient Egypt and its uses. It also covers the origins of pleated skirts in the 16th century. Different types of pleats and their impacts based on grain are described, including box, inverted, and knife pleats.
Basic Stitches
The document provides instructions for various basic hand sewing techniques used in garment construction, including temporary and permanent stitches. Temporary stitches like even and uneven basting are used to hold pieces together before permanent stitches. Permanent stitches include the running stitch, back stitch, and hemming. Hemming secures folded edges and is inconspicuous. Slip hemming is invisible but less strong. Knotted hemming forms knots around each stitch to create a very strong seam. Mastering basic hand stitches is an important sewing skill.
Types of Facings in sewing
Facings are separate pieces used to finish raw edges of a garment. They can be used to complete openings, finish scalloped edges, or neaten necklines. Common locations for facings include necklines, armholes, fronts and backs of garments, sleeve edges, and sometimes waistlines. There are three main types of facings: shaped, extended, and bias. Guidelines are provided for attaching facings properly in garments. Tips include cutting facings slightly smaller than the garment, altering patterns as needed, interfacing areas with buttonholes, and finishing edges without adding bulk or puckering.
Scrub Cap For Long Hair Printable Pattern and DIY Tutorial
Custom made scrub caps for surgeons is a REALLY big deal! https://etsy.me/2XJGbTt
Scrub Cap For Long Hair printable pattern comes in PDF format and prints on letter size (8.5" x 11") and A4 paper. You will get a PDF with instructions and pictures, and a link to video instructions.
Make sure you check the right paper size and your printer settings (100% scale of image in particular) when you are about to send the file to printer. If you don't have these capabilities on your home printer, take the file to the nearest copy/print service location (here in US it is FedEx/Kinkos and office supplies stores) and they will help you to print them out.
How to sew pleats
Pleats are folds of fabric that are sewn in place at the top edge of skirts and trousers to add fullness or ease.
Pleats can be partially sewn down inside the fold, edgestitched (page link) on the surface or simply folded with the fold secured in a crossing seam and allowed to hang freely. Press pleats along the fold for a crisp look or leave them unpressed to create soft folds. Pleats can be sewn with an underlay fabric hidden beneath the pleat so when the pleat opens up, the contrast fabric is revealed. Sew pleats in groups or pairs, sew one single pleat or make pleats across the entire width of a skirt. There are different types of pleats, including box pleats, knife pleats and inverted pleats. The fabric is folded differently for each type of pleat, but they are sewn in the same manner.
Mask Making Tutorial - DIY
This tutorial is suggesting to make a mask out of medical material, which is suitable for medical workers in direct contact with Coronavirus patients. A mask made of regular cotton fabric is sufficient for general public as protection against bigger particles, like droplets when someone sneezes close to you. I made one for myself and it stays on the nose without sliding off. Very easy to sew one too.
Bandaging&splinting
This document provides guidance on proper bandaging techniques and uses of bandages. It describes how to bandage wounds on different parts of the body including the head, chest, hand, arm, under arm, cheek/ear, elbow, and knee. Key steps are outlined for each type of bandage. The document also defines a splint as a device used to support or immobilize broken bones, and describes types of fractures as either open (bone breaks through skin) or closed (bone breaks but no open wound). First aid recommendations are given for applying splints.
Threading the Sewing Machine
The document provides instructions for threading both the upper and lower parts of a sewing machine. For the upper part, the thread must be guided through 7 steps: 1) the spool pin, 2) thread guide, 3) tension disk, 4) take-up lever, 5) thread guide, 6) lower thread guide, and 7) the needle. For the lower part, the bobbin case is removed and bobbin wound before reinserting and pulling the thread through a slot and the shuttle.
Babies sewing intructions
Molds and sewing instructions for the most common baby clothes, like playsuit, dress shirts, overol, tailores moldes pants, elastic waist pants, fitting bodice patterns and hooded sweatshirt sleeveless for child, hooded sweatshirt sleeveless pattern,
Scrub Caps Printable Pattern and How To DIY Tutorial (version 2) - Learn To S...
Want a digital copy of the pattern to scale so you can print it and cut out? Send an email - larissa.fontenot@gmail.com or get it on https://Etsy.me/2AFBiOZ
Scrub caps if they are custom made are a huge deal for surgeons. So as my daughter was about to start general surgery residency, she asked me if I could make a custom scrub cap for her - I used to sew for people for 20 years back in Russia. I still love to sew, I am creative like that. So I went searching on the internet to find a pattern to make a scrub cap she wanted: really tight fit, with elastic band in the back and, of course, I know she is going to pull on those ties, so seams might break. That's where zigzag stitch comes in handy.
I found bits and pieces online, and made up my own pattern. Decided to create a video tutorial too. Enjoy making scrub caps for your surgeon!
Bandaging
This document provides information on different types of bandages and how to apply them. It discusses roller bandages, triangular bandages, and tailed bandages. It describes the principles of bandaging, such as supporting the injured area, checking circulation, and using different wrapping techniques like spiral turns. Specific instructions are provided on applying triangular bandages, roller bandages using different turns, and other bandage styles like the T-bandage and spica bandage.
Scrub Caps Printable Pattern and How To DIY Tutorial Teaching You How To Sew ...
Want a digital copy of the pattern to scale so you can print it and cut out? Send me an email - larissa.fontenot@gmail.com or get it here: https://etsy.me/2UJQrHR
Watch me make this scrub cap from start to finish! https://youtu.be/gc2cxrAx1mA
Scrub caps if they are custom made are a huge deal for surgeons. So as my daughter was about to start general surgery residency, she asked me if I could make a custom scrub cap for her - I used to sew for people for 20 years back in Russia. I still love to sew, I am creative like that. So I went searching on the internet to find a pattern to make a scrub cap she wanted: really tight fit, with elastic band in the back and, of course, I know she is going to pull on those ties, so seams might break. That's where zigzag stitch comes in handy.
I found bits and pieces online, and made up my own pattern. Decided to create a video tutorial too. Enjoy making scrub caps for your surgeon!
Shorts construction steps
Sewing instructions for making shorts are provided in 7 steps: 1) Stitch the front and back inner leg seams; 2) Stitch the center seam with an opening for elastic; 3) Stitch the side seams; 4) Form a casing by folding the waistband inside; 5) Insert elastic through the casing, overlapping the ends; 6) Stitch the elastic ends together; 7) Close the casing opening.
How to Make a Mortise-and-Tenon
The document provides instructions for making a mortise-and-tenon wood joint. It explains that a mortise-and-tenon joint is very strong but more complicated than some other joints. It describes laying out the joint on two boards labeled M and T, with M receiving the mortise cut and T receiving the matching tenon. The mortise is cut first using a mortiser machine before cutting the tenon on board T to fit precisely inside the mortise, completing the joint. Proper layout and techniques like creeping the blade height slowly can make the mortise-and-tenon joint easier to produce.
Bandages
This document provides information about bandages, including their history, types, materials, and application techniques. It discusses the origins of Band-Aid bandages in the 1920s and innovations over time like sterile bandages, plastic strips, and antibiotic formulations. Different types of bandages are covered such as roller bandages, elastic bandages, triangular bandages, and adhesive strips. Parameters that affect bandage pressure and techniques like spiral wrapping are also reviewed. Leading bandage manufacturers are noted and innovations in bandaging discussed, like an emergency bandage that stops bleeding and a multi-layer compression bandage.
Parts of sewing machine
The document summarizes the different parts of a sewing machine. It lists 19 key parts including the spool pin, bobbin binder spindle, stitch width dial, pattern selector dial, hand wheel, stitch length dial, reverse stitch lever, power switch, bobbin winder thread guide, thread tension dial, thread take-up lever, needle clamp screw, presser foot, bobbin case, bobbin case release button, feed dog, needle, and needle plate. It then provides a brief description of the function of each part.
NECKLINE FINISHES
THIS SLIDE GIVES US AN UNDERSTANDING OF HOW RAW NECKLINE EDGES CAN BE FINISHES. ASIDE ATTACHING COLLAR, THE NECKLINE CAN BE FINISHED ON ITS OWN
fullness in garment ( tuck dart pleats etc)
Sewing. to make full, as by gathering or pleating. to bring (the cloth) on one side of a seam to a little greater fullness than on the other by gathering or tucking very slightly.
More Related Content
What's hot
Instructions front
This document provides instructions for applying Rocktape to different areas of the body for injuries such as shin splints, plantar fasciitis, Achilles tendon pain, and more. It describes how to anchor the tape, whether to stretch the middle of the tape or not, and optional techniques. General instructions are given such as applying to clean dry skin before exercise and storing the tape properly. The goal is to provide endurance tape for athletes and sport taping applications.
Bandaging
Bandaging involves covering wounds or injuries to provide support, immobilization, and protection. Common bandage materials include cotton, gauze, and elastic bandages. The appropriate bandage type and size depends on the body part and purpose. Proper bandaging techniques such as padding bony areas and applying pressure evenly without restricting circulation are important to promote healing and prevent further injury. Splints are rigid structures used to immobilize fractures and dislocations by preventing movement at the injury site. Common splints include the Thomas splint for femur fractures and Bohler-Braun splint for skeletal traction of femoral fractures.
SEAMS AND THEIR TYPES
This document discusses different types of seams used in garment construction. It begins by defining a seam as a method of joining two pieces of fabric together. There are several types of seams that are used for different purposes, including plain seams, double top seams, French seams, flat fell seams, welt seams, lapped seams, and piped and slot seams. Each seam type is described in terms of how it is constructed and what types of fabrics it is best suited for. Seams are an essential element of garment construction as they join fabric pieces together to create finished garments and accessories.
Pleats - Types and purpose.
There are several types of pleats that are used in clothing and upholstery to gather fabric. The main types are accordion pleats, knife pleats, box pleats, and inverted pleats. Pleats add extra room and allow fabric to move, gathering a wide piece of fabric into a narrower space. Their main purpose is functionality - pleats allow for more freedom of movement and prevent tightening and creasing, especially in areas like the hips when sitting. Pleats can be found on many different garments and accessories.
PLEATS......
This document is an assignment on pleats by Shubhi Goel for their 3rd semester B.Sc. in Fashion Designing & Technology. It defines pleats as folds made by doubling fabric back on itself and securing it in place, which are used to gather fabric. Pleats can be pressed or unpressed. The document discusses the history of pleating in ancient Egypt and its uses. It also covers the origins of pleated skirts in the 16th century. Different types of pleats and their impacts based on grain are described, including box, inverted, and knife pleats.
Basic Stitches
The document provides instructions for various basic hand sewing techniques used in garment construction, including temporary and permanent stitches. Temporary stitches like even and uneven basting are used to hold pieces together before permanent stitches. Permanent stitches include the running stitch, back stitch, and hemming. Hemming secures folded edges and is inconspicuous. Slip hemming is invisible but less strong. Knotted hemming forms knots around each stitch to create a very strong seam. Mastering basic hand stitches is an important sewing skill.
Types of Facings in sewing
Facings are separate pieces used to finish raw edges of a garment. They can be used to complete openings, finish scalloped edges, or neaten necklines. Common locations for facings include necklines, armholes, fronts and backs of garments, sleeve edges, and sometimes waistlines. There are three main types of facings: shaped, extended, and bias. Guidelines are provided for attaching facings properly in garments. Tips include cutting facings slightly smaller than the garment, altering patterns as needed, interfacing areas with buttonholes, and finishing edges without adding bulk or puckering.
Scrub Cap For Long Hair Printable Pattern and DIY Tutorial
Custom made scrub caps for surgeons is a REALLY big deal! https://etsy.me/2XJGbTt
Scrub Cap For Long Hair printable pattern comes in PDF format and prints on letter size (8.5" x 11") and A4 paper. You will get a PDF with instructions and pictures, and a link to video instructions.
Make sure you check the right paper size and your printer settings (100% scale of image in particular) when you are about to send the file to printer. If you don't have these capabilities on your home printer, take the file to the nearest copy/print service location (here in US it is FedEx/Kinkos and office supplies stores) and they will help you to print them out.
How to sew pleats
Pleats are folds of fabric that are sewn in place at the top edge of skirts and trousers to add fullness or ease.
Pleats can be partially sewn down inside the fold, edgestitched (page link) on the surface or simply folded with the fold secured in a crossing seam and allowed to hang freely. Press pleats along the fold for a crisp look or leave them unpressed to create soft folds. Pleats can be sewn with an underlay fabric hidden beneath the pleat so when the pleat opens up, the contrast fabric is revealed. Sew pleats in groups or pairs, sew one single pleat or make pleats across the entire width of a skirt. There are different types of pleats, including box pleats, knife pleats and inverted pleats. The fabric is folded differently for each type of pleat, but they are sewn in the same manner.
Mask Making Tutorial - DIY
This tutorial is suggesting to make a mask out of medical material, which is suitable for medical workers in direct contact with Coronavirus patients. A mask made of regular cotton fabric is sufficient for general public as protection against bigger particles, like droplets when someone sneezes close to you. I made one for myself and it stays on the nose without sliding off. Very easy to sew one too.
Bandaging&splinting
This document provides guidance on proper bandaging techniques and uses of bandages. It describes how to bandage wounds on different parts of the body including the head, chest, hand, arm, under arm, cheek/ear, elbow, and knee. Key steps are outlined for each type of bandage. The document also defines a splint as a device used to support or immobilize broken bones, and describes types of fractures as either open (bone breaks through skin) or closed (bone breaks but no open wound). First aid recommendations are given for applying splints.
Threading the Sewing Machine
The document provides instructions for threading both the upper and lower parts of a sewing machine. For the upper part, the thread must be guided through 7 steps: 1) the spool pin, 2) thread guide, 3) tension disk, 4) take-up lever, 5) thread guide, 6) lower thread guide, and 7) the needle. For the lower part, the bobbin case is removed and bobbin wound before reinserting and pulling the thread through a slot and the shuttle.
Babies sewing intructions
Molds and sewing instructions for the most common baby clothes, like playsuit, dress shirts, overol, tailores moldes pants, elastic waist pants, fitting bodice patterns and hooded sweatshirt sleeveless for child, hooded sweatshirt sleeveless pattern,
Scrub Caps Printable Pattern and How To DIY Tutorial (version 2) - Learn To S...
Want a digital copy of the pattern to scale so you can print it and cut out? Send an email - larissa.fontenot@gmail.com or get it on https://Etsy.me/2AFBiOZ
Scrub caps if they are custom made are a huge deal for surgeons. So as my daughter was about to start general surgery residency, she asked me if I could make a custom scrub cap for her - I used to sew for people for 20 years back in Russia. I still love to sew, I am creative like that. So I went searching on the internet to find a pattern to make a scrub cap she wanted: really tight fit, with elastic band in the back and, of course, I know she is going to pull on those ties, so seams might break. That's where zigzag stitch comes in handy.
I found bits and pieces online, and made up my own pattern. Decided to create a video tutorial too. Enjoy making scrub caps for your surgeon!
Bandaging
This document provides information on different types of bandages and how to apply them. It discusses roller bandages, triangular bandages, and tailed bandages. It describes the principles of bandaging, such as supporting the injured area, checking circulation, and using different wrapping techniques like spiral turns. Specific instructions are provided on applying triangular bandages, roller bandages using different turns, and other bandage styles like the T-bandage and spica bandage.
Scrub Caps Printable Pattern and How To DIY Tutorial Teaching You How To Sew ...
Want a digital copy of the pattern to scale so you can print it and cut out? Send me an email - larissa.fontenot@gmail.com or get it here: https://etsy.me/2UJQrHR
Watch me make this scrub cap from start to finish! https://youtu.be/gc2cxrAx1mA
Scrub caps if they are custom made are a huge deal for surgeons. So as my daughter was about to start general surgery residency, she asked me if I could make a custom scrub cap for her - I used to sew for people for 20 years back in Russia. I still love to sew, I am creative like that. So I went searching on the internet to find a pattern to make a scrub cap she wanted: really tight fit, with elastic band in the back and, of course, I know she is going to pull on those ties, so seams might break. That's where zigzag stitch comes in handy.
I found bits and pieces online, and made up my own pattern. Decided to create a video tutorial too. Enjoy making scrub caps for your surgeon!
Shorts construction steps
Sewing instructions for making shorts are provided in 7 steps: 1) Stitch the front and back inner leg seams; 2) Stitch the center seam with an opening for elastic; 3) Stitch the side seams; 4) Form a casing by folding the waistband inside; 5) Insert elastic through the casing, overlapping the ends; 6) Stitch the elastic ends together; 7) Close the casing opening.
How to Make a Mortise-and-Tenon
The document provides instructions for making a mortise-and-tenon wood joint. It explains that a mortise-and-tenon joint is very strong but more complicated than some other joints. It describes laying out the joint on two boards labeled M and T, with M receiving the mortise cut and T receiving the matching tenon. The mortise is cut first using a mortiser machine before cutting the tenon on board T to fit precisely inside the mortise, completing the joint. Proper layout and techniques like creeping the blade height slowly can make the mortise-and-tenon joint easier to produce.
Bandages
This document provides information about bandages, including their history, types, materials, and application techniques. It discusses the origins of Band-Aid bandages in the 1920s and innovations over time like sterile bandages, plastic strips, and antibiotic formulations. Different types of bandages are covered such as roller bandages, elastic bandages, triangular bandages, and adhesive strips. Parameters that affect bandage pressure and techniques like spiral wrapping are also reviewed. Leading bandage manufacturers are noted and innovations in bandaging discussed, like an emergency bandage that stops bleeding and a multi-layer compression bandage.
Parts of sewing machine
The document summarizes the different parts of a sewing machine. It lists 19 key parts including the spool pin, bobbin binder spindle, stitch width dial, pattern selector dial, hand wheel, stitch length dial, reverse stitch lever, power switch, bobbin winder thread guide, thread tension dial, thread take-up lever, needle clamp screw, presser foot, bobbin case, bobbin case release button, feed dog, needle, and needle plate. It then provides a brief description of the function of each part.
What's hot (20)
Scrub Cap For Long Hair Printable Pattern and DIY Tutorial
Scrub Cap For Long Hair Printable Pattern and DIY Tutorial
Scrub Caps Printable Pattern and How To DIY Tutorial (version 2) - Learn To S...
Scrub Caps Printable Pattern and How To DIY Tutorial (version 2) - Learn To S...
Scrub Caps Printable Pattern and How To DIY Tutorial Teaching You How To Sew ...
Scrub Caps Printable Pattern and How To DIY Tutorial Teaching You How To Sew ...
Similar to Continuous lap placket
NECKLINE FINISHES
THIS SLIDE GIVES US AN UNDERSTANDING OF HOW RAW NECKLINE EDGES CAN BE FINISHES. ASIDE ATTACHING COLLAR, THE NECKLINE CAN BE FINISHED ON ITS OWN
fullness in garment ( tuck dart pleats etc)
Sewing. to make full, as by gathering or pleating. to bring (the cloth) on one side of a seam to a little greater fullness than on the other by gathering or tucking very slightly.
Lesson 1-clothing-construction
The document provides an introduction and overview of basic hand stitches for sewing, dividing them into temporary stitches used for construction like basting, and permanent stitches like running stitch, backstitch, and slipstitch; it then describes various temporary and permanent stitch types in detail, including how to execute them and their common uses.
Curtains
The document provides instructions for making different types of drapery panels using pinch pleats. It discusses the various pleat styles that can be used such as French, goblet, euro, and center tack pleats. The instructions include how to measure and cut the fabric, add headers, hems, and linings. It also explains how to mark and sew the pleats using guides to ensure even placement. Other options mentioned are using grommet tapes or wavy drape tapes for different draping effects.
UTILIZED-E-MEDIA.ppt
Sewing machine is a textile machine used to stitch fabric together with thread. It provides instructions on how to sew a pencil skirt which includes: (1) Sewing the raw edges to prevent raveling; (2) Sewing and pressing darts to shape the waist; (3) Inserting a zipper on the back; (4) Interfacing the waistband for structure and shape; (5) Attaching the waistband to the skirt; (6) Adding a kick pleat for mobility; (7) Hemming the skirt; and (8) Attaching a hook and eye to secure the waistband. The document provides step-by-step guidance on sewing a basic pencil skirt.
TUCKS.pptx
The document discusses various types of embellishment techniques used in garment construction including tucks, pleats, gathers, shirring, ruffles, plackets, fasteners, pockets, and necklines. It provides descriptions and instructions for different styles of each technique such as pin tucks, box pleats, patch pockets, v-necklines, and more. Examples and diagrams are included to illustrate the various embellishment methods.
Three dimensional dress form
The document provides information on using three-dimensional dress forms for designing and fitting clothing. It discusses how dress forms come in different sizes to represent different body types and how they allow designers to see how garments will fit and drape on the body. Adjustable forms can be tailored to fit specific individuals. The document then gives step-by-step instructions for making a custom dress form to match an individual's exact measurements and outlines the materials and methods needed.
Pratigya Bhatnagar,B.Sc.-Fashion Technology+2 years Diploma
The document discusses garment finishing and its importance in determining the quality and branding of a garment. It states that garment finishing, including details like necklines, seams, and brand placement, can indicate whether a garment is branded or inexpensive. The document also provides instructions for adjusting pattern pieces to fit different shoulder shapes, including square, sloping, broad, and narrow shoulders. Additional garment finishing techniques like piping, facing, and draping are mentioned, as well as a "cut and insert" fitting technique using a contrasting fabric.
terms and definitions of apparel manufacturing.pptx
This document provides information on different types of drafting plans used in weaving. It describes straight, skip, stain, pointed, broken, divided, grouped, combined and curved drafting plans. The straight draft is the simplest where each warp yarn is placed in an individual heald frame. Skip draft is used when warp density is high. Pointed draft reverses the straight draft after half the repeat warp. Broken draft produces fabrics with patterns like herringbone. Divided, grouped and combined drafts are used to weave complex patterns and fabrics with stripes or checks. Curved draft is applied for large repeat units to reduce the number of heald frames.
Bdft ii, d&pm, unit-i, draping
The document provides instructions for draping fabric on a dress form to design garments. It discusses preparing the dress form by constructing it using strips of paper molded to the body. It then explains the basic steps of draping, including aligning and anchoring the fabric, clipping excess fabric, and pinning darts. Key areas like the waist, princess seam, and shoulders are marked to transfer the design to the fabric. The overall goal is to manipulate the fabric to obtain perfect fit and harmony for the garment design.
珠包稿Eveningbag
This document provides instructions for making an evening bag from brocade, satin, embroidered dupioni or taffeta fabric. It involves applying interfacing to the front and back pieces, stitching them together and adding a zipper. A pocket is made and attached, and a lining is sewn and slipstitched to the inside. When complete, the bag has an inner lining and outer fabric with a zippered closure and single pocket.
我真的很(((愛、愛、愛)))你們。這是一個溫暖的手作~上樓珠珠包圖稿
這是上樓珠珠包圖稿
樓上的朋友們 ~ 我真的很(((愛、愛、愛)))你們。
旅行的用意不僅僅是......帶回來的收穫我只想分享，或許犯了許多的禁忌，還是抱著樂觀的態度，傻傻的做，
旅途中 遇見了許多幫助的朋友，咦 ! 牠們也傻了起來，帶著我飛過許多地方，不時的提醒我吃飯了.休息了，
不乖的我，總是讓人擔心，我飛得不是很好，要不是朋友們不段的微笑鼓勵著 。
"傻瓜"我們都一樣，我想因為愛所以愛吧!
Geeta Kumari ,Fashion Design ,Dezyne E'cole College
This document is a project report submitted by Geeta Kumari, a student of fashion design, on the topic of garment technology. The report provides information on different types of seams and stitches, including definitions and examples. It discusses plain seams, lapped seams, French seams, flat felled seams, and more. It also covers topics like stitch per inch, classes of stitches, types of seams including superimposed seams, lapped seams, and bound seams. The report was submitted to fulfill requirements for Geeta Kumari's two-year diploma in fashion design.
Divya Vijayvargiya ,Fashion Design ,Dezyne E'cole College
This document discusses various types of seams and stitches used in garment construction. It begins by defining what a seam is and explaining factors to consider when choosing seams. It then provides details on 18 specific seam types, including plain seams, lapped seams, French seams, and flat felled seams. It also covers stitch per inch guidelines and 8 classes of seams as defined by British standards. In summary, the document serves as a guide to the different seams and stitches used in apparel manufacturing.
sleeves and collars.pptx
The document provides details about fashion design courses, workshops, and drafting instructions. It includes information on workshops covering construction details of plackets and fasteners, pockets and necklines, and pre-teen tops with collars and sleeves. It also provides instructions for drafting a basic bodice block, pre-teen bodice, basic sleeve, and variations of sleeves including set in, kimono, raglan and bell sleeves. Further, it describes different types of collars like peter pan, sailor, straight, shawl and Chinese collars.
Garment Design & Construction 1 - Waistline Finishes
This document discusses various waistline finishes for women's wear patterns, including straight waistbands, low waistbands, facings, bindings, invisible zippers, and fly fronts. It provides instructions and diagrams for drafting these different waistline finishes on paper patterns. Key details include cutting straight waistbands as a rectangle, drafting low waistbands by lowering the waistline and cutting an inside and outside piece, and drafting bindings on the bias grain for stretch. The document is from a book on women's wear pattern cutting that provides further resources.
BANDAGING: TRIANGULAR BANDAGING AND CRAVAT, TYPES OF KNOTS
BANDAGING: TRIANGULAR BANDAGING AND CRAVAT, TYPES OF KNOTS: CRAVAT, ELBOW BANDAGE, ARM SLING, PALM BANDAGE, HAND BANDAGE, HEAD BANDAGE, ELBOW BANDAGE, EAR INJURY BANDAGE, FOREARM BANDAGE, LEG AND THIGH BANDAGE, FOOT BANDAGE. TYPES OF KNOTS: PRINCIPLES OF TYING KNOTS, TYPES: REEF KNOT, BOWLINE , SHEET BENT
Lunawolfpadpatternsupdated
This document provides instructions for making homemade cloth menstrual pads using various fabrics. It includes templates to print and cut out pad shapes, as well as step-by-step instructions for creating pads suitable for light, medium, or heavy flows. Suggested fabrics for the pad core, topping layer, and backing layer are provided. The instructions cover tasks such as assembling the pad core, sewing the layers together, adding closures, and optional variations like adding a waterproof layer. Photos illustrate the process.
Seam
This document provides information on selecting and constructing different types of seams and seam finishes. It discusses factors to consider when selecting a seam, such as the fabric type, intended use, and care of the garment. Common seams like plain, French, and flat-fell are described along with their construction steps. Specialty seams and different types of seam finishes are also outlined, including techniques for woven and knit fabrics. The document emphasizes that seams and finishes should be smooth, even, and protect the fabric edges from raveling or curling.
U 3 introduction to pattern making
The document discusses various methods of patternmaking including drafting, flat paper patternmaking, and draping. It then describes key terms and tools used in patternmaking such as grain lines, darts, seam allowance, notches, and various rulers. Finally, it covers how to accurately take body measurements which are important for obtaining a good fit when constructing garments. The document provides information on the fundamental techniques and terminology used in patternmaking.
Similar to Continuous lap placket (20)
Pratigya Bhatnagar,B.Sc.-Fashion Technology+2 years Diploma
Pratigya Bhatnagar,B.Sc.-Fashion Technology+2 years Diploma
terms and definitions of apparel manufacturing.pptx
terms and definitions of apparel manufacturing.pptx
Geeta Kumari ,Fashion Design ,Dezyne E'cole College
Geeta Kumari ,Fashion Design ,Dezyne E'cole College
Divya Vijayvargiya ,Fashion Design ,Dezyne E'cole College
Divya Vijayvargiya ,Fashion Design ,Dezyne E'cole College
Garment Design & Construction 1 - Waistline Finishes
Garment Design & Construction 1 - Waistline Finishes
BANDAGING: TRIANGULAR BANDAGING AND CRAVAT, TYPES OF KNOTS
BANDAGING: TRIANGULAR BANDAGING AND CRAVAT, TYPES OF KNOTS
Recently uploaded
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA哪里办理(sjsu毕业证书)美国圣何塞州立大学毕业证硕士文凭证书原版一模一样
原版定制【微信:bwp0011】《(sjsu毕业证书)美国圣何塞州立大学毕业证硕士文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Cherries 32 collection of colorful paintings
The cherry: beauty, softness, its heart-shaped plastic has inspired artists since Antiquity. Cherries and strawberries were considered the fruits of paradise and thus represented the souls of men.
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
9356872877Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar. Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian MatkaDpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKAColour Theory for Painting - Fine Artist.pdf
This document is all about Colour Theory for Fine Artist / Painter.
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka一比一原版美国加州大学圣地亚哥分校毕业证（ucsd毕业证书）如何办理
一模一样【微信：A575476】【美国加州大学圣地亚哥分校毕业证（ucsd毕业证书）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
ARNAUVALERY RECORD STORE SCAVENGER HUNT.
This is my presentation for the Record Store Scavenger Hunt.
一比一原版加拿大多伦多大学毕业证（uoft毕业证书）如何办理
一模一样【微信：A575476】【加拿大多伦多大学毕业证（uoft毕业证书）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart Recently uploaded (20)
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
storyboard: Victor and Verlin discussing about top hat
storyboard: Victor and Verlin discussing about top hat
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart
Continuous lap placket
- 1. Sure-Fit Designs™ Continuous Lap Sleeve Placket Fitting the Fast & Easy way with... PRINTED IN U.S.A.Copyright© 2011, Sure-Fit Designs™ Ranita Corporation, Eugene, Oregon. All rights reserved. Blouses or shirts with long sleeves and cuffs generally require an opening in the sleeve and are usually finished with either a traditional shirt sleeve placket or a continuous lap placket. These directions are for the continuous lap. The length of the placket opening can vary from pattern to pattern. Simply mark the length of this opening on the fabric as indicated on the pattern. Placket/Lap Preparation: The lap is generally cut of self-fabric either on the straight of grain or on the bias for a decorative effect e.g. when using plaid or striped fabric. 1. Cut lap band 1¼” (3.2cm) wide and double the length of the opening plus ½” (1.3cm). Optionally, band may be cut up to 1¾” (4.5cm) wide which will result in a wider finished continuous lap. Initially, it may be easier to work with a wider band particularly if you have never used this technique before. 2. Press under one long edge ¼” (0.6cm) wide on the lap band. Placket/Slash Preparation: 1. Transfer/mark placket opening length onto sleeve with tracing wheel or marking pencil. Clearly mark a dot at the tip of the placket opening. This dot will be the pivot point when stitching. 2. Reinforce this tip by stitching along the placket opening in a triangular shape as shown and shortening the stitch length to15 stitches/inch as you near the tip. At the tip, with the needle in the down position, pivot, then stitch down the opposite side of the slight triangle, lengthening the stitches after you’ve turned down the other side. 3. Slash between the stitching lines being extremely careful not to clip through the stitching at the tip.
- 2. Page 2 - Continuous Lap Sleeve Placket PRINTED IN U.S.A.Copyright© 2011, Sure-Fit Designs™ Ranita Corporation, Eugene, Oregon. All rights reserved. Sure-Fit Designs™ Stitching Lap to Placket Opening 1. Pin right side of lap to wrong side of opening. Align reinforcement stitching to the ¼” (0.6cm) lap seam allowance. The sleeve seam allowance will be ¼” (0.6cm) at the lower edge but almost nothing at the slash tip center. 4. On the inside, stitch a short triangle which helps the lap to lay flat when pressed. 3. Press the lap seam allowances toward the inside of the lap. Then fold the lap’s folded edge toward the right side of the sleeve, thereby enclosing the seam allowance and raw edges. Carefully edge stitch near the fold through all thicknesses. 2. Stitch the lap/band to the placket opening, stitching slowly as you approach the tip. Pivot and be careful not to stitch a ‘tuck’ at the tip center. At this tip center, you will catch only a few threads of the sleeve fabric. 5. On right side, fold and press as shown.