Colla, Gregory Resume 2015
•Download as DOCX, PDF•
1 like•605 views
Gregory Colla is a civil engineering student at the University of Connecticut anticipated to graduate in May 2016. He has relevant coursework in areas like structural analysis, transportation planning, and soil mechanics. His projects include a topographical survey where he used a total station and created maps in MicroStation, and a parking demand study at a shopping center. He is seeking an entry-level civil engineering position focusing on structural engineering.
Report
Share
Report
Share
Recommended
Tyler Resume
Tyler L. Vance is a civil engineer with a Bachelor's degree from Michigan Technological University. He has experience in design projects including an alternative water supply system and airport design. Vance is proficient in AutoCAD, NX, Revit, Autodesk Inventor and Google Sketch up. He is seeking an apprenticeship to prepare for his PE exam and has internship experience testing materials for construction quality assurance.
Airborne vehicle detection in dense urban areas using ho g features and dispa...
Final Year IEEE Projects, Final Year Projects, Academic Final Year Projects, Academic Final Year IEEE Projects, Academic Final Year IEEE Projects 2013, Academic Final Year IEEE Projects 2014, IEEE MATLAB Projects, 2013 IEEE MATLAB Projects, 2013 IEEE MATLAB Projects in Chennai, 2013 IEEE MATLAB Projects in Trichy, 2013 IEEE MATLAB Projects in Karur, 2013 IEEE MATLAB Projects in Erode, 2013 IEEE MATLAB Projects in Madurai, 2013 IEEE MATLAB Projects in Salem, 2013 IEEE MATLAB Projects in Coimbatore, 2013 IEEE MATLAB Projects in Tirupur, 2013 IEEE MATLAB Projects in Bangalore, 2013 IEEE MATLAB Projects in Hydrabad, 2013 IEEE MATLAB Projects in Kerala, 2013 IEEE MATLAB Projects in Namakkal, IEEE MATLAB Image Processing, IEEE MATLAB Face Recognition, IEEE MATLAB Face Detection, IEEE MATLAB Brain Tumour, IEEE MATLAB Iris Recognition, IEEE MATLAB Image Segmentation, Final Year Matlab Projects in Pondichery, Final Year Matlab Projects in Tamilnadu, Final Year Matlab Projects in Chennai, Final Year Matlab Projects in Trichy, Final Year Matlab Projects in Erode, Final Year Matlab Projects in Karur, Final Year Matlab Projects in Coimbatore, Final Year Matlab Projects in Tirunelveli, Final Year Matlab Projects in Madurai, Final Year Matlab Projects in Salem, Final Year Matlab Projects in Tirupur, Final Year Matlab Projects in Namakkal, Final Year Matlab Projects in Tanjore, Final Year Matlab Projects in Coimbatore, Final Year Matlab Projects in Bangalore, Final Year Matlab Projects in Hydrabad, Final Year Matlab Projects in Kerala.
Smart Mapping - How to Create Stunning Maps - Esri UK Annual Conference 2016
Smart Mapping is a new Esri technology that creates maps automatically by using intelligent defaults, visible scale ranges, and scale-aware styling to simplify the map making process. It analyzes data and applies the right symbology and visualization at the appropriate map scale, allowing users to generate stunning maps quickly without compromising cartographic design. The presentation demonstrated how Smart Mapping works across Esri platforms and concluded with information on upcoming Smart Mapping features and resources for learning more.
thesis's abstact
This thesis develops a methodological framework for evaluating public accessibility to services within a city. The framework collects data on public services and builds indicators to measure accessibility for different areas. It then applies statistics to understand resident profiles and examines both the number and minimum distances of services for each area. Finally, it combines these analyses to construct an ideal accessibility model and applies the model to Athens, identifying conclusions, deficiencies, and ways to improve future urban planning and the framework.
Geographic information systems
Geographic information systems (GIS) collect, model, and analyze spatial and non-spatial data to represent physical features and socio-economic data. GIS can be divided into cartographic, digital terrain modeling, and geographic objects applications used for civil engineering, planning, natural resource management, and more. GIS requires data modeling, integration from multiple sources, analysis, and special operators to conduct tasks like interpolation, interpretation, and proximity analysis.
Thomas Hise Resume2
Thomas Hise has a Bachelor of Science in Electrical Engineering from Wright State University and relevant coursework in digital design, circuits, programming, and physics. He has technical skills in MATLAB, VHDL, Verilog, C/C++, Microsoft Office, and circuit design software. Hise has over 8 years of experience maintaining and troubleshooting aircraft electrical systems for the US Air Force, including power systems, lighting, controls and sensors. He also has customer service experience operating an inbound call center for a waste disposal company, where he assisted over 100 customers per day. Hise holds an active Secret Security Clearance and received two Air Force Achievement Awards for his leadership during maintenance inspections.
Infographics introduction
Infographics combine visual elements like images, charts and maps with text to clearly communicate complex information or datasets. There are several types of infographics, including statistical infographics that use graphs and charts for quantitative data, timelines that show chronological sequences, process infographics that depict step-by-step processes through diagrams, and map infographics that represent geographic data spatially. The ultimate goal of infographics is to present intricate information in an appealing and meaningful way that reveals insights to viewers.
Clauser_Resume_4_2016
Sarah Clauser is seeking a full-time position in civil engineering or an entry level equivalent available in June 2016. She has internship experience in civil design and as an engineering aide for a town. Her skills include proficiency in Microsoft Office, intermediate skills in design software, and certifications in erosion and sediment control. She is pursuing a Bachelor of Science in Civil Engineering Technology from Rochester Institute of Technology expected in May 2016.
Recommended
Tyler Resume
Tyler L. Vance is a civil engineer with a Bachelor's degree from Michigan Technological University. He has experience in design projects including an alternative water supply system and airport design. Vance is proficient in AutoCAD, NX, Revit, Autodesk Inventor and Google Sketch up. He is seeking an apprenticeship to prepare for his PE exam and has internship experience testing materials for construction quality assurance.
Airborne vehicle detection in dense urban areas using ho g features and dispa...
Final Year IEEE Projects, Final Year Projects, Academic Final Year Projects, Academic Final Year IEEE Projects, Academic Final Year IEEE Projects 2013, Academic Final Year IEEE Projects 2014, IEEE MATLAB Projects, 2013 IEEE MATLAB Projects, 2013 IEEE MATLAB Projects in Chennai, 2013 IEEE MATLAB Projects in Trichy, 2013 IEEE MATLAB Projects in Karur, 2013 IEEE MATLAB Projects in Erode, 2013 IEEE MATLAB Projects in Madurai, 2013 IEEE MATLAB Projects in Salem, 2013 IEEE MATLAB Projects in Coimbatore, 2013 IEEE MATLAB Projects in Tirupur, 2013 IEEE MATLAB Projects in Bangalore, 2013 IEEE MATLAB Projects in Hydrabad, 2013 IEEE MATLAB Projects in Kerala, 2013 IEEE MATLAB Projects in Namakkal, IEEE MATLAB Image Processing, IEEE MATLAB Face Recognition, IEEE MATLAB Face Detection, IEEE MATLAB Brain Tumour, IEEE MATLAB Iris Recognition, IEEE MATLAB Image Segmentation, Final Year Matlab Projects in Pondichery, Final Year Matlab Projects in Tamilnadu, Final Year Matlab Projects in Chennai, Final Year Matlab Projects in Trichy, Final Year Matlab Projects in Erode, Final Year Matlab Projects in Karur, Final Year Matlab Projects in Coimbatore, Final Year Matlab Projects in Tirunelveli, Final Year Matlab Projects in Madurai, Final Year Matlab Projects in Salem, Final Year Matlab Projects in Tirupur, Final Year Matlab Projects in Namakkal, Final Year Matlab Projects in Tanjore, Final Year Matlab Projects in Coimbatore, Final Year Matlab Projects in Bangalore, Final Year Matlab Projects in Hydrabad, Final Year Matlab Projects in Kerala.
Smart Mapping - How to Create Stunning Maps - Esri UK Annual Conference 2016
Smart Mapping is a new Esri technology that creates maps automatically by using intelligent defaults, visible scale ranges, and scale-aware styling to simplify the map making process. It analyzes data and applies the right symbology and visualization at the appropriate map scale, allowing users to generate stunning maps quickly without compromising cartographic design. The presentation demonstrated how Smart Mapping works across Esri platforms and concluded with information on upcoming Smart Mapping features and resources for learning more.
thesis's abstact
This thesis develops a methodological framework for evaluating public accessibility to services within a city. The framework collects data on public services and builds indicators to measure accessibility for different areas. It then applies statistics to understand resident profiles and examines both the number and minimum distances of services for each area. Finally, it combines these analyses to construct an ideal accessibility model and applies the model to Athens, identifying conclusions, deficiencies, and ways to improve future urban planning and the framework.
Geographic information systems
Geographic information systems (GIS) collect, model, and analyze spatial and non-spatial data to represent physical features and socio-economic data. GIS can be divided into cartographic, digital terrain modeling, and geographic objects applications used for civil engineering, planning, natural resource management, and more. GIS requires data modeling, integration from multiple sources, analysis, and special operators to conduct tasks like interpolation, interpretation, and proximity analysis.
Thomas Hise Resume2
Thomas Hise has a Bachelor of Science in Electrical Engineering from Wright State University and relevant coursework in digital design, circuits, programming, and physics. He has technical skills in MATLAB, VHDL, Verilog, C/C++, Microsoft Office, and circuit design software. Hise has over 8 years of experience maintaining and troubleshooting aircraft electrical systems for the US Air Force, including power systems, lighting, controls and sensors. He also has customer service experience operating an inbound call center for a waste disposal company, where he assisted over 100 customers per day. Hise holds an active Secret Security Clearance and received two Air Force Achievement Awards for his leadership during maintenance inspections.
Infographics introduction
Infographics combine visual elements like images, charts and maps with text to clearly communicate complex information or datasets. There are several types of infographics, including statistical infographics that use graphs and charts for quantitative data, timelines that show chronological sequences, process infographics that depict step-by-step processes through diagrams, and map infographics that represent geographic data spatially. The ultimate goal of infographics is to present intricate information in an appealing and meaningful way that reveals insights to viewers.
Clauser_Resume_4_2016
Sarah Clauser is seeking a full-time position in civil engineering or an entry level equivalent available in June 2016. She has internship experience in civil design and as an engineering aide for a town. Her skills include proficiency in Microsoft Office, intermediate skills in design software, and certifications in erosion and sediment control. She is pursuing a Bachelor of Science in Civil Engineering Technology from Rochester Institute of Technology expected in May 2016.
Inventory3D v0.5
Asset Management System fully integrated with 3D Building Design, and with ESRI ArcGIS for location, mapping, and outside plant.
10 Benefits of Purpose-Built CAFM Tools
Purpose-built CAFM platforms have behaviors and capabilities not seen in spreadsheets or tools adopted to plug holes or meet requirements. This infographic outlines the benefits of using purpose-built CAFM tools to manage your space and facilities.
Map Reduce Presentation
This document discusses MapReduce, a programming model and implementation developed by Google for processing large datasets across clusters of computers. It describes MapReduce as having two phases - a map phase where key-value pairs are input and output, and a reduce phase where the outputs of map are combined. An example is given of finding the highest CGPA for each year from a Makerere University dataset to illustrate how MapReduce works by breaking the processing into parallelized map and reduce steps.
Regional evaluation workflow
The document outlines a regional evaluation technical workflow process that involves:
1) Generating play component risk maps through various methods like workstations, hand drawing, and automatic extraction to assess risks related to reservoirs, seals, traps, and hydrocarbon generation and migration.
2) Scanning, exporting, and georeferencing the risk maps in a GIS system and multiplying the maps to determine final composite risk maps.
3) Gathering and preparing various geological and geophysical data from public, internal, and external sources and generating databases and property maps to help with the regional evaluation analysis.
Resume-NickolasCecilio
Nickolas Dias Cecilio is seeking an internship or job utilizing his aerospace engineering and computer science education. He has a B.S. in Aerospace Engineering from the University of Michigan with a focus on computer science. His experience includes leadership roles on projects involving satellite design, orbital dynamics simulation, aircraft design optimization, and aircraft engine parameter characterization. He is fluent in English and Portuguese with additional language skills.
Tor creator
TORCreator application creates TOR Model for land parcels based on stored data in order to save, present, export or print model for the stakeholders or organizations. This all happened through AutoCAD as a powerful, easy and efficient workspace. In addition, TORCreator has many other geometric functions such as calculating dimensions, areas and saving field coordinates which come from field automatically, also it saves owner and consultant information.
Resume summer 18
Quy Phan is a mechanical engineering student at California State University, Long Beach expected to graduate in December 2018 with a 3.9 GPA. He has worked as a math tutor at Santa Ana College and has experience with CAD and FEA software like SOLIDWORKS, Abaqus, and AutoCAD. Some of his relevant course projects include modeling and analyzing a dynamic satellite system, designing a can crusher prototype, and performing stress analysis on mechanical piping systems.
Modelling
1) Modelling involves representing reality through physical, graphical, mathematical or statistical models. It allows dangerous procedures to be simulated and ideas to be explored.
2) Computer modelling uses programs like West Point Bridge Designer and Excel to generate models and analyze data like costs and load testing.
3) Physical modelling involves building scale models out of materials like straws, joints or plastic to represent and test designs.
Presentation spatial data nata final
This document discusses geospatial data and its presentation in maps. It defines spatial data as data that identifies the geographic location of features on Earth, such as natural or constructed features. Spatial data is usually stored using coordinates and topology and can be accessed and analyzed using Geographic Information Systems (GIS). The document describes the two main types of spatial data - raster and vector - and how they represent real world features differently. It also discusses visualization of spatial data in maps and introduces the software QGIS for geospatial data presentation and mapping.
Resume
This document contains contact information and a resume for Mushfiqur Rahman. It lists his education including a Bachelor of Urban and Regional Planning degree from Khulna University of Engineering & Technology from 2012-2016. It also lists his work experience as an urban planner and project manager for M/S RABBI ENTERPRISES LTD since 2017. Finally, it includes two publications and provides references.
Applocation of Numerical Methods
Nahian Ahmed, student ID 151-15-5137 from section G, will present on the application of numerical methods in computer science. The presentation will discuss curve fitting, which is a widely used analysis tool for examining relationships between predictors. Curve fitting can be used in MS Excel to generate curves and equations like y=ax+b that fit the provided data. It can also determine the best fit line for a data set. The presentation will cover Nahian's 4th semester project on this topic.
Presentation_JeepCar
The document discusses using the software HyperMesh to analyze the design performance of a 2016 Jeep Wrangler car body model using beam elements. HyperMesh allows breaking down complex physical objects into small finite elements to solve simple equations and accurately model component behavior. It provides a consistent platform for CAD-CAE integration across an enterprise. Benefits include high-speed meshing, advanced 3D visualization, and increased modeling efficiency.
3D Geospatial Visualization Using Power Map
This document summarizes a presentation about 3D geospatial visualization using Power Map. It introduces the presenter and discusses key topics like datums, Microsoft BI geospatial tools including SSRS, Power View, and Power Map. It provides details on Power Map like system requirements and examples of using it to visualize time-stamped 3D charts and animated tours of geographic data. The presentation concludes with instructions on getting started with Power Map and contact information.
Computational financev2
This document discusses using databases in financial engineering. It provides an overview of shifting from spreadsheets to relational databases, highlighting advantages like improved data management efficiency and the ability to capture bulk data. The document also discusses database concepts like the relational database model, entity relationship diagrams, and joins. Additionally, it covers topics in financial engineering like mortgage backed securities, asset backed securities, and valuation of these products. Quizzes are provided on database and C programming concepts as well as exam preparation.
Diya Resume
Diya Maria Varghese is a goal-driven civil engineering leader with 18 months of experience in transportation and construction. She has a Master's in Civil Engineering from Texas A&M University-Kingsville and is currently interning at the City of Kingsville, where she has designed bike lanes and conducted traffic studies. Varghese also has a Bachelor's in Civil Engineering from Amal Jyothi College of Engineering and has held internships and tutoring positions related to her field.
CV GIS mapping specialist/CAD/ESRI Cerified ( Arcgis descktop associate 10.5 ...
I’m a GIS Cartographer
I hold a Master’s degree in Geomatics .
I have over 14 years experience in the realization of project integrating component GIS and database, in collecting, processing and editing Geospatial data with Esri ArcGIS platform.
I collaborated with economists, developers and planners on diversified projects: energy, natural resources management, urban planning, mobility, land use and agriculture.
I’m also a GIS and computer graphics trainer ( ArcGIS, Illustrator ..) with strong background in quantitative geography and GIS analysis and fluent English and French.
25 years designing applications for AutoCAD
This document lists the engineering applications that Marcelo Sanhueza Herrera has developed over 25 years for use with AutoCAD. Some of the applications mentioned include ATower for designing transmission line towers and foundations, INFOCELL for planning cellular site locations within AutoCAD, and RebarTools for generating rebar drawings, schedules, and 3D modeling inside AutoCAD. All of the intellectual property described is owned by Marcelo Sanhueza Herrera.
Geo spatial analytics using Microsoft BI
The document summarizes a presentation on geospatial analytics using Microsoft BI tools. It provides an agenda for the presentation including an overview of why geospatial analytics is useful and a demo of tools like Power View, GeoFlow, and SQL Server Reporting Services. It discusses how each tool can be used for interactive data visualization and exploration of geographic data on maps and globes. The presentation aims to illustrate which Microsoft BI tools are best suited for different types of geospatial analysis and when to use each tool.
conversion of digital elevation maps to geological information
The document discusses software being developed to convert digital elevation map data into geological information by analyzing erosion and deposition patterns over time. The core algorithms calculate changes from sequential DEM data sets to construct geologically meaningful objects. Additional software automates data storage, retrieval and visualization, dramatically reducing the effort to produce geological results. The system's modular design allows adding new functionality as needed and produces maps, sections and plots to analyze the geological data.
Agi For Space Mission Analysis And Design
AGI provides industry standard software for analyzing land, sea, air, and space systems across their lifecycles. Their spatial mechanics engine precisely maps dynamic systems in 3D over time and optimizes coordinate transformations. Their software tools can analyze relationships between objects, predict collisions, and support mission planning, operations, and post-mission analysis for applications like spacecraft design, sensor modeling, and communications analysis. AGI has offices worldwide and supports both individual and enterprise users across government and commercial sectors.
Connor McCoy Resume
Connor McCoy has over 5 years of experience in quality assurance testing for video games. He has tested games and applications for localization in over 20 languages at Disney Interactive. Prior to that, he tested hardware and software communication for a toy product at PlaymationTesting. McCoy also reported bugs and performed collaborative testing at Activision on PC and PS4 platforms. He graduated from Los Angeles Film School with an Associate's degree in Computer Science in Video Game Production.
Claire L Connors Resume
Claire Lopez Connors has over 10 years of experience in project management, operations coordination, and client relations. She led a project at Bose Corporation that resulted in $800k in savings and standardized a process used by over 50 individuals. Previously, she was the second highest producing personal banker at Bank of America, generating 140% of her goal. She holds a B.A. in Political Science from Cal State Long Beach and is Lean Six Sigma Yellow Belt trained.
More Related Content
What's hot
Inventory3D v0.5
Asset Management System fully integrated with 3D Building Design, and with ESRI ArcGIS for location, mapping, and outside plant.
10 Benefits of Purpose-Built CAFM Tools
Purpose-built CAFM platforms have behaviors and capabilities not seen in spreadsheets or tools adopted to plug holes or meet requirements. This infographic outlines the benefits of using purpose-built CAFM tools to manage your space and facilities.
Map Reduce Presentation
This document discusses MapReduce, a programming model and implementation developed by Google for processing large datasets across clusters of computers. It describes MapReduce as having two phases - a map phase where key-value pairs are input and output, and a reduce phase where the outputs of map are combined. An example is given of finding the highest CGPA for each year from a Makerere University dataset to illustrate how MapReduce works by breaking the processing into parallelized map and reduce steps.
Regional evaluation workflow
The document outlines a regional evaluation technical workflow process that involves:
1) Generating play component risk maps through various methods like workstations, hand drawing, and automatic extraction to assess risks related to reservoirs, seals, traps, and hydrocarbon generation and migration.
2) Scanning, exporting, and georeferencing the risk maps in a GIS system and multiplying the maps to determine final composite risk maps.
3) Gathering and preparing various geological and geophysical data from public, internal, and external sources and generating databases and property maps to help with the regional evaluation analysis.
Resume-NickolasCecilio
Nickolas Dias Cecilio is seeking an internship or job utilizing his aerospace engineering and computer science education. He has a B.S. in Aerospace Engineering from the University of Michigan with a focus on computer science. His experience includes leadership roles on projects involving satellite design, orbital dynamics simulation, aircraft design optimization, and aircraft engine parameter characterization. He is fluent in English and Portuguese with additional language skills.
Tor creator
TORCreator application creates TOR Model for land parcels based on stored data in order to save, present, export or print model for the stakeholders or organizations. This all happened through AutoCAD as a powerful, easy and efficient workspace. In addition, TORCreator has many other geometric functions such as calculating dimensions, areas and saving field coordinates which come from field automatically, also it saves owner and consultant information.
Resume summer 18
Quy Phan is a mechanical engineering student at California State University, Long Beach expected to graduate in December 2018 with a 3.9 GPA. He has worked as a math tutor at Santa Ana College and has experience with CAD and FEA software like SOLIDWORKS, Abaqus, and AutoCAD. Some of his relevant course projects include modeling and analyzing a dynamic satellite system, designing a can crusher prototype, and performing stress analysis on mechanical piping systems.
Modelling
1) Modelling involves representing reality through physical, graphical, mathematical or statistical models. It allows dangerous procedures to be simulated and ideas to be explored.
2) Computer modelling uses programs like West Point Bridge Designer and Excel to generate models and analyze data like costs and load testing.
3) Physical modelling involves building scale models out of materials like straws, joints or plastic to represent and test designs.
Presentation spatial data nata final
This document discusses geospatial data and its presentation in maps. It defines spatial data as data that identifies the geographic location of features on Earth, such as natural or constructed features. Spatial data is usually stored using coordinates and topology and can be accessed and analyzed using Geographic Information Systems (GIS). The document describes the two main types of spatial data - raster and vector - and how they represent real world features differently. It also discusses visualization of spatial data in maps and introduces the software QGIS for geospatial data presentation and mapping.
Resume
This document contains contact information and a resume for Mushfiqur Rahman. It lists his education including a Bachelor of Urban and Regional Planning degree from Khulna University of Engineering & Technology from 2012-2016. It also lists his work experience as an urban planner and project manager for M/S RABBI ENTERPRISES LTD since 2017. Finally, it includes two publications and provides references.
Applocation of Numerical Methods
Nahian Ahmed, student ID 151-15-5137 from section G, will present on the application of numerical methods in computer science. The presentation will discuss curve fitting, which is a widely used analysis tool for examining relationships between predictors. Curve fitting can be used in MS Excel to generate curves and equations like y=ax+b that fit the provided data. It can also determine the best fit line for a data set. The presentation will cover Nahian's 4th semester project on this topic.
Presentation_JeepCar
The document discusses using the software HyperMesh to analyze the design performance of a 2016 Jeep Wrangler car body model using beam elements. HyperMesh allows breaking down complex physical objects into small finite elements to solve simple equations and accurately model component behavior. It provides a consistent platform for CAD-CAE integration across an enterprise. Benefits include high-speed meshing, advanced 3D visualization, and increased modeling efficiency.
3D Geospatial Visualization Using Power Map
This document summarizes a presentation about 3D geospatial visualization using Power Map. It introduces the presenter and discusses key topics like datums, Microsoft BI geospatial tools including SSRS, Power View, and Power Map. It provides details on Power Map like system requirements and examples of using it to visualize time-stamped 3D charts and animated tours of geographic data. The presentation concludes with instructions on getting started with Power Map and contact information.
Computational financev2
This document discusses using databases in financial engineering. It provides an overview of shifting from spreadsheets to relational databases, highlighting advantages like improved data management efficiency and the ability to capture bulk data. The document also discusses database concepts like the relational database model, entity relationship diagrams, and joins. Additionally, it covers topics in financial engineering like mortgage backed securities, asset backed securities, and valuation of these products. Quizzes are provided on database and C programming concepts as well as exam preparation.
Diya Resume
Diya Maria Varghese is a goal-driven civil engineering leader with 18 months of experience in transportation and construction. She has a Master's in Civil Engineering from Texas A&M University-Kingsville and is currently interning at the City of Kingsville, where she has designed bike lanes and conducted traffic studies. Varghese also has a Bachelor's in Civil Engineering from Amal Jyothi College of Engineering and has held internships and tutoring positions related to her field.
CV GIS mapping specialist/CAD/ESRI Cerified ( Arcgis descktop associate 10.5 ...
I’m a GIS Cartographer
I hold a Master’s degree in Geomatics .
I have over 14 years experience in the realization of project integrating component GIS and database, in collecting, processing and editing Geospatial data with Esri ArcGIS platform.
I collaborated with economists, developers and planners on diversified projects: energy, natural resources management, urban planning, mobility, land use and agriculture.
I’m also a GIS and computer graphics trainer ( ArcGIS, Illustrator ..) with strong background in quantitative geography and GIS analysis and fluent English and French.
25 years designing applications for AutoCAD
This document lists the engineering applications that Marcelo Sanhueza Herrera has developed over 25 years for use with AutoCAD. Some of the applications mentioned include ATower for designing transmission line towers and foundations, INFOCELL for planning cellular site locations within AutoCAD, and RebarTools for generating rebar drawings, schedules, and 3D modeling inside AutoCAD. All of the intellectual property described is owned by Marcelo Sanhueza Herrera.
Geo spatial analytics using Microsoft BI
The document summarizes a presentation on geospatial analytics using Microsoft BI tools. It provides an agenda for the presentation including an overview of why geospatial analytics is useful and a demo of tools like Power View, GeoFlow, and SQL Server Reporting Services. It discusses how each tool can be used for interactive data visualization and exploration of geographic data on maps and globes. The presentation aims to illustrate which Microsoft BI tools are best suited for different types of geospatial analysis and when to use each tool.
conversion of digital elevation maps to geological information
The document discusses software being developed to convert digital elevation map data into geological information by analyzing erosion and deposition patterns over time. The core algorithms calculate changes from sequential DEM data sets to construct geologically meaningful objects. Additional software automates data storage, retrieval and visualization, dramatically reducing the effort to produce geological results. The system's modular design allows adding new functionality as needed and produces maps, sections and plots to analyze the geological data.
Agi For Space Mission Analysis And Design
AGI provides industry standard software for analyzing land, sea, air, and space systems across their lifecycles. Their spatial mechanics engine precisely maps dynamic systems in 3D over time and optimizes coordinate transformations. Their software tools can analyze relationships between objects, predict collisions, and support mission planning, operations, and post-mission analysis for applications like spacecraft design, sensor modeling, and communications analysis. AGI has offices worldwide and supports both individual and enterprise users across government and commercial sectors.
What's hot (20)
CV GIS mapping specialist/CAD/ESRI Cerified ( Arcgis descktop associate 10.5 ...
CV GIS mapping specialist/CAD/ESRI Cerified ( Arcgis descktop associate 10.5 ...
conversion of digital elevation maps to geological information
conversion of digital elevation maps to geological information
Viewers also liked
Connor McCoy Resume
Connor McCoy has over 5 years of experience in quality assurance testing for video games. He has tested games and applications for localization in over 20 languages at Disney Interactive. Prior to that, he tested hardware and software communication for a toy product at PlaymationTesting. McCoy also reported bugs and performed collaborative testing at Activision on PC and PS4 platforms. He graduated from Los Angeles Film School with an Associate's degree in Computer Science in Video Game Production.
Claire L Connors Resume
Claire Lopez Connors has over 10 years of experience in project management, operations coordination, and client relations. She led a project at Bose Corporation that resulted in $800k in savings and standardized a process used by over 50 individuals. Previously, she was the second highest producing personal banker at Bank of America, generating 140% of her goal. She holds a B.A. in Political Science from Cal State Long Beach and is Lean Six Sigma Yellow Belt trained.
CURRENT RESUME-2 (1)
This document is a resume for R. Chance Braneff seeking a career in industrial fabrication. It summarizes his qualifications which include expertise in various welding techniques as well as experience in piping drawings, AutoCAD, refrigeration systems, and welding inspection. Braneff has an Associate's degree in drafting technology and refrigeration certifications. He has over 10 years of experience in welding and supervisory roles for companies in the industrial and maritime fields.
Coates_ThomasJ_resume
Thomas Coates has over 5 years of experience in marketing and advertising, working with brands such as Applebee's, BMW, Coca-Cola, and Goodyear. He has strengths in areas like digital marketing, social media marketing, creative strategy, and account management. Coates is currently a Brand Development Intern at Fusion Marketing, where he is spearheading projects around brand development and qualitative market research for the B2B division. He holds an MBA in Marketing from Saint Louis University and a BA in Communication from Villanova University.
CMD PROfessional Resume 2015
Christopher De Leigh has over 10 years of experience in fashion e-commerce, specializing in merchandising, trend forecasting, and identifying innovative brands. He has worked as a creative director and lifestyle model, and has experience in e-commerce, runway, print, and live modeling. Previously, he worked as Kazbah Director for Karmaloop, where he increased sales by over 50% by developing marketing strategies and identifying trends. He has a bachelor's degree in communications from Northeastern University.
Resume John A. Sawa
John Sawa has over 30 years of experience in various roles including as a concierge at Cancer Treatment Centers of America, a utilities locator at SMP Utilities, and an engineer at Abbott Laboratories. He started his career in the US Navy where he worked on electrical systems for submarines. He is skilled in customer service, project management, training, and electrical engineering. He is looking for new opportunities where he can apply his skills and experience.
Current Resume 2015.pdf
Susan Raley is seeking an accounting or administrative position with over 15 years of relevant experience. She has held finance clerk and bookkeeping roles where she performed tasks like accounts payable, receivable, and reconciliations. Most recently, she was a finance clerk at Muckleshoot Indian Casino where she coded invoices, prepared them for approval, and matched invoices to purchase documents. She also has experience as a cage cashier and credit executive. Raley has an education in accounting and completed advanced Excel training.
Viewers also liked (7)
Similar to Colla, Gregory Resume 2015
GaretMller_Resume
Garet Miller is seeking a position in mechanical design and drafting. He has a Bachelor of Science degree in Design and Drafting Technology from the University of Central Missouri with an emphasis in mechanical engineering and a GPA of 3.04 overall and 3.3 in his major. Miller has internship experience in mechanical design at Kiewit and as a CAD intern at Burns & McDonnell where he revised drawings in AutoCAD, Microstation, and SmartPlant P&ID. He also has leadership experience as Treasurer for the Delta Chi Fraternity.
Chris McTavish Resume
This document is a resume for Christopher R. McTavish, a mechanical engineering graduate from Baylor University seeking a career utilizing his analytical and leadership skills. He has experience managing engineering projects and teams through his coursework and internship. His projects include designing a micro elevator and testing utility gates to recommend manufacturing improvements. He is proficient in CAD, FEA, and other engineering software and has leadership roles in his fraternity and engineering societies.
Roseann Tortola Resume
Roseann Tortola is a civil engineering graduate seeking a position in transportation engineering. She has a B.S. in Civil and Environmental Engineering from UMass Amherst with relevant coursework and experience using AutoCAD, GIS, and traffic modeling software. During her time in school, she held leadership roles in student organizations and participated in several design projects involving transportation infrastructure, traffic analysis, and sustainable building design.
9-1-15 lab 1 resume Final Draft
Cesar D. Sarvide Chavez provides his resume detailing his objective to obtain an entry level engineer position in transportation engineering. He has an Associate's degree in science from Sacramento City College and a Bachelor's degree in civil engineering from California State University, Sacramento where he also obtained his EIT certification. His education provided him coursework in various engineering disciplines including transportation engineering, structural design, soil mechanics, and environmental engineering. His skills include proficiency with AutoCAD, structural analysis software, Microsoft Office, and C++. He is bilingual in English and Spanish and has experience in lab work, tutoring, and internships with Caltrans and as an auto and computer technician providing repairs. He has received multiple scholarships recognizing his
Carissa Manson Resume
This document is a resume for Carissa L Manson that summarizes her education and relevant experience. She graduated from Old Dominion University with a Bachelor of Science in Civil Engineering Technology. During her time in school, she participated in an engineering summer program and interned at Parsons Transportation Group where she assisted engineers in the field. Her senior design project involved designing plans for a one-story building and foundation using AutoCAD. In addition to her engineering studies and internships, she held various part-time retail jobs and was involved in community volunteer activities.
Resume_Shiva Kaitha
This document is a resume for Kaitha Shiva Prasad, who is seeking an entry-level structural engineer position. It summarizes his education, including a master's degree from Texas A&M University and a bachelor's degree from National Institute of Technology in India. It also lists his skills in structural engineering software and code experience. His experience includes structural design work at American Engineers Group and internships at Texas A&M Transportation Institute and two engineering firms in India.
Resume4
David Churchill has over 30 years of experience in mechanical engineering, steel structure design, piping design, stress analysis, and AutoCAD. He has worked as a Fiber-Optic Cable Layout Designer, Loan Processor, GIS Technician, Mechanical Engineer, and Well Site Geologist. He also has expertise in AutoCAD, fiber-optic cable, stress analysis, steel structure design, piping design, and geological sampling and analysis. He holds a Bachelor of Science in Mechanical Engineering and a Bachelor of Arts in Geology from the University of Colorado, Denver.
Resume latest
Saurabh Kale is a Master's student in Industrial Engineering at the University of Houston with relevant work experience. He has interned at Piping Technology and Products assessing manufacturing software and implementing process improvements. Additionally, he has worked as a Teaching Assistant and Mechanical Design Engineer. Kale is pursuing Six Sigma Green Belt certification and skills in analytics software like R, Solidworks, Excel and simulation tools.
Manthan's Resume
Manthan Shah is a structural engineer seeking new opportunities. He has a MS in Structural Engineering from Illinois Institute of Technology and over 3 years of experience in structural design and project management. His experience includes designing structural steel, managing projects, and on-site construction inspection. He is proficient in various structural analysis and design software.
COMPARATIVE ANALYSIS OF GEOMETRIC DESIGN OF HIGHWAY USING AUTOCAD CIVIL 3D AN...
This document compares the geometric design of a highway in India using AutoCAD Civil 3D and MX ROAD software. It describes the process of importing survey data, creating horizontal and vertical alignments that meet design criteria, developing cross-sectional elements, and generating earthwork quantities. The methodology used in both software programs is explained through flowcharts and screenshots. The results show that MX ROAD estimated slightly higher earthwork volumes compared to AutoCAD Civil 3D. While both programs are suitable for road design, AutoCAD Civil 3D is considered more user-friendly with style-driven objects and single tools for alignment editing. MX ROAD requires more specialized string-based modeling knowledge and separate alignment and profile geometries.
RESUME
Kinza Muneer is a civil engineer seeking a challenging position where she can use her planning, designing, and overseeing skills in construction to help grow the company. She has a proactive personality and strong problem-solving skills. She has a bachelor's degree in civil engineering and has experience with projects involving trusses, quantity surveying, traffic analysis, surveying, and structural design. She is proficient in AutoCAD, Primavera, ETABS, SAFE, and Microsoft Office. She completed a six-week internship with the Military Engineer Service involving quantity estimation, drawing review, concrete design, piling works, and bar bending schedules. Kinza has knowledge of British and American construction standards
Asael Escribano-Resume2016
Asael Escribano is seeking a job as a civil engineer. He has a Bachelor's degree in Civil Engineering from the University of Puerto Rico with a GPA of 3.79. He is bilingual in English and Spanish and has over 5 years of experience in civil engineering projects including drainage design, roadway design, and construction management and inspection. His most recent role is as an Engineering Assistant II at the Texas Department of Transportation where he performs drainage design, traffic control planning, and hydraulic reports.
Kenneth_Meding_Resume
Kenneth James Meding is seeking a challenging Virtual Design and Construction Engineering opportunity where he can utilize his extensive skills and qualifications. He has over 10 years of experience in 4D scheduling simulation creation, 3D modeling, BIM, construction inspection, and engineering education. His previous roles include serving as a VDC Specialist for TIC - The Industrial Company developing 4D models and 3D printed models for industrial projects. He also has experience as an instructor for the University of Texas - Tyler and Clarkson University Civil Engineering programs.
Resume 2016
Louis J. Zampetti Jr. received a Bachelor of Science in Civil Engineering from the University of North Carolina at Charlotte in May 2016. He has experience working as an intern at a civil engineering firm where he assisted engineers with project design and drafting, surveying, cost estimates, and construction inspection. He also has relevant coursework and experience testing materials, designing roadways and steel structures, and using AutoCAD and structural analysis software.
Yunan Jin resume 2016
This document is a resume for Yunan Jin Engineer, who is pursuing an MS in Structural Engineering at UC San Diego. The resume outlines their education, including obtaining a BS in Structural Engineering from UC San Diego with a 3.64 GPA and currently pursuing an MS with a 4.0 GPA. It also lists relevant coursework and skills, including proficiency with engineering software such as SolidWorks, SAP2000, AutoCAD, and MATLAB. The resume provides details of structural engineering projects undertaken as a student, including designing a water tower, stadium, crane, and bridge column. It also notes relevant work experience assisting in a college dining hall.
Resume
This resume is for Christopher Grunbok, who is pursuing a Bachelor's and Master's degree in Mechanical Engineering from The Catholic University of America. He maintains a 3.84 GPA and has been on the Dean's List every semester since 2017. His experience includes research assistant roles focused on computational fluid dynamics and 3D printing processes. He also worked as a front waiter at Clyde's Restaurant Group. His projects showcase skills with MATLAB, SolidWorks, and CFD simulation programs. He is proficient in various engineering software and techniques related to mechanics, materials science, and system modeling.
shan-sun--ms-engineering---resume
Shan Sun is a mechanical engineer with experience in mechanical design, MEMS design, hydraulic systems, project management, CAD software, tolerance analysis, design of experiments, and problem solving. He has a M.S. in Mechanical Engineering from UC Irvine anticipated in March 2015, and a B.S. in Mechatronic Engineering from Wuhan University of Science and Technology. His professional experience includes graduate research at UC Irvine Microsystems Lab involving MEMS design and fabrication, and serving as a project manager and team member for UC Irvine's 2013 Formula SAE race car team.
Sabir ali cv light(engr.saabir@gmail.com)
The document is a resume for an engineer seeking new employment opportunities. It summarizes the candidate's academic and professional qualifications, including a BSc in Civil Engineering, several years of experience as a site engineer on construction projects, and skills in design and analysis software. The resume also outlines the candidate's final year project in which they developed a MATLAB program to analyze biaxial bending in reinforced concrete columns.
Reducing Risk and Liability in Infrastructure Projects
This document summarizes a presentation on reducing risk and liability in infrastructure projects through the use of Building Information Modeling (BIM). It discusses how BIM allows for early coordination between design disciplines to identify conflicts. BIM models can be used to generate accurate estimates and for construction management tracking. Integrating contractors earlier through approaches like Integrated Project Delivery (IPD) and establishing model use protocols can further reduce risks for owners and other project stakeholders. When implemented effectively, BIM and IPD support improved communication and help surface problems in design in order to minimize risks and liability across the project lifecycle.
shirish_pallepati_Resume
This document is a resume for Shirish Kumar Pallepati summarizing his education and experience. He has a Master's in Civil Engineering from Clemson University and a Bachelor's from Vasavi College of Engineering in India. He has internship experience in design firms and as a student trainee on educational building projects. He is proficient in structural analysis and design software like ETABS, SAP2000, Revit, STAAD Pro, and Mathcad. His projects include bridge design, building analysis, stadium vibration analysis, and seismic design of a 12-story building. He aims to get his PE license as soon as possible.
Similar to Colla, Gregory Resume 2015 (20)
COMPARATIVE ANALYSIS OF GEOMETRIC DESIGN OF HIGHWAY USING AUTOCAD CIVIL 3D AN...
COMPARATIVE ANALYSIS OF GEOMETRIC DESIGN OF HIGHWAY USING AUTOCAD CIVIL 3D AN...
Reducing Risk and Liability in Infrastructure Projects
Reducing Risk and Liability in Infrastructure Projects
Colla, Gregory Resume 2015
- 1. GREGORY COLLA 123 Mark Drive, South Windsor, CT 06074 (860) 644-3557 | gregory.colla@uconn.edu OBJECTIVE To obtain an entry-level Civil Engineering position, particularly in the structural engineering discipline, that challenges skills in design, analysis, and problem solving. EDUCATION University of Connecticut, Storrs, CT Anticipated Graduation: May 2016 Bachelor of Science in Civil Engineering Cumulative GPA: 3.386 Dean’s List RELEVANT COURSES Hydraulic Engineering Soil Mechanics Mechanics of Materials Civil Engineering Materials Advanced Structural Analysis Design of Steel Structures Transportation Engineering and Planning Decision Analysis in CE SYSTEMS KNOWLEDGE Microsoft Word and Excel MicroStation 3D CAD Autodesk Revit Autodesk Inventor SAP 2000 Structural Analysis and Design Software Matlab RELEVANT PROJECTS Topographical and Planimetric Survey Project Fall 2014 Used a total station and data collector to set up traverse and take side shots for points of interest and elevation data. Utilized a MicroStation to create topographic and planimetric maps of the survey area. Shopping Center Parking Survey Project Spring 2015 Collected parking data for a shopping center during peak and non-peak hours to determine whether the parking available at the shopping center exceeded the demand recommended by the Institution of Transportation Engineers. WORK EXPERIENCE Nomads Adventure Quest, Staff Member September 2011 – Present Assisted customers and maintained gaming machines. Gained valuable communication skills.