The document discusses projects created by students at the College of Engineering Pune's (COEP) FAB Lab. It summarizes several student projects involving circuit design, 3D modeling, robotics, and CNC machines. It also mentions that the FAB Lab hosts workshops and was visited by Nobel Laureate Roger Tsien. The FAB Lab provides opportunities for students to design and prototype projects using the lab's technologies and equipment.

1. College of Engineering Pune (COEP)
Forerunners in Technical Education
GREETINGS FROM COEP
FAB MATTERS!

2. College of Engineering Pune (COEP)
Forerunners in Technical Education
FAB5- The Fifth International FAB Lab Forum &
Symposium held at COEP in August 2009
FAB MATTERS!

3. College of Engineering Pune (COEP)
Forerunners in Technical Education
COEP FAB Lab

4. College of Engineering Pune (COEP)
Forerunners in Technical Education
Circuits to control three stepper motors of Mini-mill
Student: Harsha Sunder
Controlled from EMC2.
tiny44 and atmega88 chipset.
Projects @ COEP FAB Lab

5. College of Engineering Pune (COEP)
Forerunners in Technical Education
Contd.
EMC2 software
interface with boards
EMC2 software interface
output at tool head replaced
with pen replicates the
profile on screen of EMC2
to the paper

6. College of Engineering Pune (COEP)
Forerunners in Technical Education
Engraving operation on Low cost desktop Minimill
Machine
Student: Miss. Shital Thote

7. College of Engineering Pune (COEP)
Forerunners in Technical Education
Low cost Racing steering
Student: Akash Shetey
http://www.youtube.com/watch?v=KWczQ3jUB3Y

8. College of Engineering Pune (COEP)
Forerunners in Technical Education
Kitchen waste recycling Machine
Auto-locking system for a
wheel chair
Design Mockups of..

9. College of Engineering Pune (COEP)
Forerunners in Technical Education
Utilization of Fab lab facilities for COEP students’ projects
1. Robotics lab projects
2.COEP Satellite programme
(partly funded by Indian Space Research
Organisation)

10. College of Engineering Pune (COEP)
Forerunners in Technical Education
INTEGRATED DEVELOPMENT BOARD OF MOTOR
CONTROL
Students: Mr. Hitesh Khatri Mr. Dhiraj Mahajan
•Integrated development board which can control parameters of various different
motors
•The peripheral integrated circuit (PIC18F458) was used as a microprocessor to
generated step pulses for the stepper motor, an angle for the RC servo motor and
change duty cycle to vary the speed of the DC motor

11. College of Engineering Pune (COEP)
Forerunners in Technical Education
DESIGN AND DEVLOPMENT OF TRAFFIC LIGHT CONTROLLER USING CONTROLLER AREA NETWORK
DESIGN AND DEVLOPMENT OF TRAFFIC LIGHT CONTROLLER
USING CONTROLLER AREA NETWORK
Student: HARSHAL S. HEMANE
 To solve the traffic congestion issue.
 Develop a traffic light control system
controlled by controller area network
(CAN).
 Traffic light controller operated by for
push button
 First and Second push button for
operational state working in specified
time
 Third push button for preoperational
state only yellow light is blinking
 Fourth push button for stop Red light is
on

12. College of Engineering Pune (COEP)
Forerunners in Technical Education
Scotch Yoke Mechanism for Demonstration Purpose
 The Scotch yoke is a mechanism for
converting the linear motion of a slider
into rotational motion or vice-versa.
 The Piston or other reciprocating part
is directly coupled to a Yoke with a slot
that engages a pin on the rotating part
 The shape of the motion of the piston is
a pure sine wave over time given a
constant rotational speed

13. College of Engineering Pune (COEP)
Forerunners in Technical Education
Development of low Cost Wind Vane for
local Meteorological applications
Developed By: Miss. Apeksha Bochare
 The design of a wind vane is such that the weight is evenly distributed
on each side of the surface.
 Digital Display of wind direction.
 Initial fabrication cost Appox. $50

14. College of Engineering Pune (COEP)
Forerunners in Technical Education
Virtual Fab Lab Project
Developed by: Mr. Sandip Anasane & Miss. Apeksha Bochare
Almost All Fab Lab processes are in Virtual Environment available at
http://coep.vlab.co.in
 Virtual Shopbot
 Virtual Modella
 And many more…..

15. College of Engineering Pune (COEP)
Forerunners in Technical Education
SHOPBOT Dinosaur
We are not Extinct!

16. College of Engineering Pune (COEP)
Forerunners in Technical Education
…FAB Passion Contd…

17. College of Engineering Pune (COEP)
Forerunners in Technical Education
Workshop conducted in FAB Lab on Practical approach
to Machine Design by Mr. Sandip Anasane

18. College of Engineering Pune (COEP)
Forerunners in Technical Education
Workshop conducted in FAB Lab on Digital
Fabrication by Mr.Sandip Anasane

19. College of Engineering Pune (COEP)
Forerunners in Technical Education
Nobel Laureate Roger Tsien at Fab Lab in Oct. 2010

20. College of Engineering Pune (COEP)
Forerunners in Technical Education
FAB MATTERS!
(Family of Atoms & Bits)
THANK YOU!