The document describes the Climate Wizard, an indirect evaporative air conditioner that provides highly efficient cooling using outside air. It delivers 100% fresh, cooled outside air while greatly reducing energy consumption compared to conventional air conditioning systems. Climate Wizard has a proven track record worldwide and offers flexible configurations for a wide range of industries. It provides benefits such as improved indoor air quality, reduced electrical demand, flexibility for various applications, lower installation costs, and reduced running costs through its innovative indirect evaporative cooling technology.
Benefits of integration between heat pumps and food refrigeration systems for...CAREL Industries S.p.A
CAREL Application Specialist Sergio Maria Capanelli illustrates the concept of integration between Heat Pumps and Refrigeration systems, highlighting the positive effect it could bring in energy savings
Biagio Lamanna, HVAC/R Knowledge Center Manager focus on the interaction between building management systems via the IoT and machine learning and heat pumps featuring advanced controls. The idea is to highlight its potential in terms of reducing energy consumption, lowering operating costs and optimisation.
CAREL's Enrico Boscaro illustrates at ASHRAE Malaysia seminar the potentials of Indirect Evaporative Cooling technology as an energy savings instrument in cooling applications, in particular for the Make up Air handlers sector.
In latest years the use of waterloop systems in commercial refrigeration has seen a great boost thanks to the use of DC inverter driven compressors that have significantly improve the energy efficiency of this kind of systems.
The synergic use of DC inverter driven compressors and electronic expansion valves jointly managed by advanced control systems permit to combine the typical benefits of a waterloop system, such as factory tested plug and play cabinets, flexibility and charge/leaks reduction, with energy efficiency, food quality improvements, regulation stability and prehentive diagnostics.
CAREL is continuously improving its Heos sistema for DC waterloop systems, presenting how this technology can further improve the system analysis to a cabinet vs cabinet level, details not available with traditional systems, and how the benefits of this systems can be adapted using different refrigerants.
The use of CO2 in Europe as refrigerant in commercial refrigeration is getting more and more common. Starting from the big compressor rack for hypermarket, then with small and cost effective solution for small supermarket, now the attention of the industry is moved to small condensing unit for C-Store and very small formats.
The technology applied in the compressor rack application is not directly applicable in the condensing unit world, historically driven by initial cost and ease of use.
CAREL is offering now a full solution for CO2 transcritical condensing unit able to guarantee
- Energy efficiency thanks to specific components able to work at very high pressure but specifically design for such small capacity
- DC compressors technology to further improve the energy efficiency not reachable
- Full control of the system to guarantee best perfomances and reliability
- Advanced display and remote connection to maximize the ease of use.
CO2 transcritical condensing unit are available in the market since years but never getting the appropriate success due mostly to unavailability of adequate components (especially compressors) to correctly place this solution into the market.
CAREL already market leader of this application is now proposing a new solution equipped with DC compressors that are able to improve the performances and at the same time reducing overall costs and dimensions of the whole unit.
This speech informs about the excellent key performance factors of BLDC technology in this application and explains the specific control and system demands.
Sustainability & energy efficiency - Sustainable solutions for refrigerationCAREL Industries S.p.A
Last 28th September Klima-Kälte-Tag gave us the unique opportunity to talk to a wide audience about the newest innovations for supermarket refrigeration. With a presentation entitled “Nachhaltige Kälteerzeugung in Supermärkten” Ronald Mayer, sales Manager Refrigeration & Retail D-A-CH-NL, discussed about Heos, our revolutionary high efficiency system solution that combines the use of a waterloop system with DC inverter technology.
Benefits of integration between heat pumps and food refrigeration systems for...CAREL Industries S.p.A
CAREL Application Specialist Sergio Maria Capanelli illustrates the concept of integration between Heat Pumps and Refrigeration systems, highlighting the positive effect it could bring in energy savings
Biagio Lamanna, HVAC/R Knowledge Center Manager focus on the interaction between building management systems via the IoT and machine learning and heat pumps featuring advanced controls. The idea is to highlight its potential in terms of reducing energy consumption, lowering operating costs and optimisation.
CAREL's Enrico Boscaro illustrates at ASHRAE Malaysia seminar the potentials of Indirect Evaporative Cooling technology as an energy savings instrument in cooling applications, in particular for the Make up Air handlers sector.
In latest years the use of waterloop systems in commercial refrigeration has seen a great boost thanks to the use of DC inverter driven compressors that have significantly improve the energy efficiency of this kind of systems.
The synergic use of DC inverter driven compressors and electronic expansion valves jointly managed by advanced control systems permit to combine the typical benefits of a waterloop system, such as factory tested plug and play cabinets, flexibility and charge/leaks reduction, with energy efficiency, food quality improvements, regulation stability and prehentive diagnostics.
CAREL is continuously improving its Heos sistema for DC waterloop systems, presenting how this technology can further improve the system analysis to a cabinet vs cabinet level, details not available with traditional systems, and how the benefits of this systems can be adapted using different refrigerants.
The use of CO2 in Europe as refrigerant in commercial refrigeration is getting more and more common. Starting from the big compressor rack for hypermarket, then with small and cost effective solution for small supermarket, now the attention of the industry is moved to small condensing unit for C-Store and very small formats.
The technology applied in the compressor rack application is not directly applicable in the condensing unit world, historically driven by initial cost and ease of use.
CAREL is offering now a full solution for CO2 transcritical condensing unit able to guarantee
- Energy efficiency thanks to specific components able to work at very high pressure but specifically design for such small capacity
- DC compressors technology to further improve the energy efficiency not reachable
- Full control of the system to guarantee best perfomances and reliability
- Advanced display and remote connection to maximize the ease of use.
CO2 transcritical condensing unit are available in the market since years but never getting the appropriate success due mostly to unavailability of adequate components (especially compressors) to correctly place this solution into the market.
CAREL already market leader of this application is now proposing a new solution equipped with DC compressors that are able to improve the performances and at the same time reducing overall costs and dimensions of the whole unit.
This speech informs about the excellent key performance factors of BLDC technology in this application and explains the specific control and system demands.
Sustainability & energy efficiency - Sustainable solutions for refrigerationCAREL Industries S.p.A
Last 28th September Klima-Kälte-Tag gave us the unique opportunity to talk to a wide audience about the newest innovations for supermarket refrigeration. With a presentation entitled “Nachhaltige Kälteerzeugung in Supermärkten” Ronald Mayer, sales Manager Refrigeration & Retail D-A-CH-NL, discussed about Heos, our revolutionary high efficiency system solution that combines the use of a waterloop system with DC inverter technology.
Hvac Heating, Ventilation and Air ConditioningDeepak Jayan
ake coupled systems are run to a sufficient body of water, and the coils are submerged in the water. The coils are wrapped in overlapping circles. The coils must be submerged at least 8ft to prevent freezing.
Operate on simple refrigeration cycle
Reversing the cycle provides heating
Temperature limitations
Air to air
Water source
Geothermal
Lake coupled
LogiCool InRak Data Centre Cooling 10-60kW: Highly efficient and resilient
The LogiCool InRak is an efficient in-row cooling solution for high density data centre applications. Positioned next to a rack or within a row of server cabinets, the InRak directs air horizontally to the front of the server racks. The InRak delivers complete confidence, with in-built resilience and excellent efficiencies, lifting the InRak’s EER to 90.3 during part load operation.
Providing industry-leading cooling for its footprint, the InRak offers the ultimate in scalable solutions for the modern data centre. It includes a top connection for rooms without a floor void and delivers even greater efficiency when combined with Airedale’s latest technology free-cooling chillers.
Hecu – high energy efficiency solution for condensing units fitted with DC co...CAREL Industries S.p.A
Hecu Sistema is the CAREL solution for commercial refrigeration, designed for high energy efficiency condensing units that use either traditional HFC refrigerants or natural refrigerants such as CO2.
The system’s distinctive features include the use of DC inverter technology and real-time synchronisation with the refrigeration units. Hecu sistema meets the requirements of the latest environmental sustainability standards relating to energy consumption (Eco-design directive) and the use of low GWP refrigerants (F-Gas regulation). Stable control means high-quality food preservation and a drastic reduction in waste.
Hecu sistema is also compatible with all CAREL supervisors, which can monitor each individual system or groups of systems, and offer dashboards to simplify interpretation and analysis of system operation.
Marco Piovan, Sales & Marketing HVAC Application Manager and Matteo Venturi, Sales & Marketing Application Specialist at Chillventa eSpecial 2020. NEW uChiller for process chiller and use of Chillbooster for condenser and liquid coolers for industrial applications.
Know more: carel.com/product/mchiller-process
Plug-in cabinets solutions overview for commercial and professional refrigera...CAREL Industries S.p.A
Giovanni Tonin, Sales & Marketing Refrigeration Application Manager and Sebastiano Di Lena, Sales & Marketing Refrigeration Group Marketing – Food Retail at Chillventa eSpecial 2020. From iJ to HEOSone: CAREL's solutions for plug in cabinets
Know more: natref.carel.com
This is a presentation regarding the introduction to the heating and cooling system technology called variable refrigerant flow systems. (non-commercial)
Data center cooling infrastructure slideLivin Jose
CRAC vs CRAH, what is Air-Side Economizer, What is chillers, What is cooling tower, what is CRAC, What is CRAH, what is the importance of cooling in data center, what is Water Side Economizer,
Michele Mohorovicich, Marketing Manager Refrigeration – EMEA CAREL, at Eurovent Middle East 2020. This presentation describes the solution trends for Supermarket retrofit and the benefits of DC inverter technology and EXV in food retail applications. Explore CAREL DC technology solutions to reach energy efficiency and food preservation.
Air Handling Unit Refurbishment Presentation EnvirotecEnvirotec Ltd
Envirotec\'s Air Handling Unit (AHU) refurbishment CPD presentation is designed for Engineering Building Services Consultants and Architects. Contact Steve Brown to arrange a visit to your consultancy.
Katsunori Shibata talked about the new CO2 installations such as the recent one in Osaka and explained the performance of the booster system with four compressors, perfectly equipped for low temperature applications.
New chiller requirements go into effect on Jan. 1, 2015. ASHRAE Standard 90.1-2010: Energy Standard for Buildings Except Low-Rise Residential Buildings, Addendum ch details minimum performance requirements of heating and air conditioning equipment, including chillers, boilers, and packaged equipment, which continue to increase from the previous standard.
Equipment efficiencies are increased for heat pumps, packaged terminal air conditioners, single package vertical heat pumps, air conditioners, and evaporative condensers. Additional provisions address commercial refrigeration equipment, improved controls on heat rejection and boiler equipment, requirements for expanded use of energy recovery, small motor efficiencies, and fan power control and credits. Control revision requirements have been added to the standard such as direct digital controls in many applications. Finally, the 2013 edition completes the work that was begun on equipment efficiencies for chillers in the 2010 edition.
While Addendum ch may simplify these requirements for consulting engineers, chiller manufacturers are faced with equipment redesigns to comply by the deadline. Also, designers must pay special attention to which path of compliance will be used when testing chillers with or without variable frequency drives (VFDs).
Re-innovating the CO2 transcritical efficiency for small and medium formatsCAREL Industries S.p.A
The presentation focuses on DC inverter CO2 condensing units for small and medium formats. CAREL's know-how in controlling DC compressors, combined with the top-in- class solution for C-stores and small commercial applications, is driving the European market to finally use natural refrigerants in all applications, even the smaller ones.
This is a recording of a presentation delivered by Qatar Green Leaders at the 2nd Annual Qatar HVAC Contracting Conference held at the Intercontinental Doha on 4th December 2017. The presentation addressed the interrelationships between HVAC design and various high performance goals as defined by LEED & GSAS rating systems.
Qatar Green Leaders
Green Building Certification Management (LEED / GSAS)
Email Address: info@qatargreenleaders.com
Company Profile: http://bit.ly/QGL_pro
Location Map: http://bit.ly/QGLgo
Web Address: www.qatargreenleaders.com
Linked-in Page: http://www.linkedin.com/company/qatar-green-leaders
Facebook Page: https://www.facebook.com/QGL.Doha
Twitter Account: https://twitter.com/qgl2010
YouTube: http://bit.ly/QGL_tube
In this presentation given during Chillventa 2018, Stefano Soggia introduces DC Cella Split, our DC inverter control solution for cold rooms that merges all the benefits of breaking-through solutions like UltraCella, Hecu and EVDice, and provides up to 25% energy savings compared to equivalent on/off technology.
Hvac Heating, Ventilation and Air ConditioningDeepak Jayan
ake coupled systems are run to a sufficient body of water, and the coils are submerged in the water. The coils are wrapped in overlapping circles. The coils must be submerged at least 8ft to prevent freezing.
Operate on simple refrigeration cycle
Reversing the cycle provides heating
Temperature limitations
Air to air
Water source
Geothermal
Lake coupled
LogiCool InRak Data Centre Cooling 10-60kW: Highly efficient and resilient
The LogiCool InRak is an efficient in-row cooling solution for high density data centre applications. Positioned next to a rack or within a row of server cabinets, the InRak directs air horizontally to the front of the server racks. The InRak delivers complete confidence, with in-built resilience and excellent efficiencies, lifting the InRak’s EER to 90.3 during part load operation.
Providing industry-leading cooling for its footprint, the InRak offers the ultimate in scalable solutions for the modern data centre. It includes a top connection for rooms without a floor void and delivers even greater efficiency when combined with Airedale’s latest technology free-cooling chillers.
Hecu – high energy efficiency solution for condensing units fitted with DC co...CAREL Industries S.p.A
Hecu Sistema is the CAREL solution for commercial refrigeration, designed for high energy efficiency condensing units that use either traditional HFC refrigerants or natural refrigerants such as CO2.
The system’s distinctive features include the use of DC inverter technology and real-time synchronisation with the refrigeration units. Hecu sistema meets the requirements of the latest environmental sustainability standards relating to energy consumption (Eco-design directive) and the use of low GWP refrigerants (F-Gas regulation). Stable control means high-quality food preservation and a drastic reduction in waste.
Hecu sistema is also compatible with all CAREL supervisors, which can monitor each individual system or groups of systems, and offer dashboards to simplify interpretation and analysis of system operation.
Marco Piovan, Sales & Marketing HVAC Application Manager and Matteo Venturi, Sales & Marketing Application Specialist at Chillventa eSpecial 2020. NEW uChiller for process chiller and use of Chillbooster for condenser and liquid coolers for industrial applications.
Know more: carel.com/product/mchiller-process
Plug-in cabinets solutions overview for commercial and professional refrigera...CAREL Industries S.p.A
Giovanni Tonin, Sales & Marketing Refrigeration Application Manager and Sebastiano Di Lena, Sales & Marketing Refrigeration Group Marketing – Food Retail at Chillventa eSpecial 2020. From iJ to HEOSone: CAREL's solutions for plug in cabinets
Know more: natref.carel.com
This is a presentation regarding the introduction to the heating and cooling system technology called variable refrigerant flow systems. (non-commercial)
Data center cooling infrastructure slideLivin Jose
CRAC vs CRAH, what is Air-Side Economizer, What is chillers, What is cooling tower, what is CRAC, What is CRAH, what is the importance of cooling in data center, what is Water Side Economizer,
Michele Mohorovicich, Marketing Manager Refrigeration – EMEA CAREL, at Eurovent Middle East 2020. This presentation describes the solution trends for Supermarket retrofit and the benefits of DC inverter technology and EXV in food retail applications. Explore CAREL DC technology solutions to reach energy efficiency and food preservation.
Air Handling Unit Refurbishment Presentation EnvirotecEnvirotec Ltd
Envirotec\'s Air Handling Unit (AHU) refurbishment CPD presentation is designed for Engineering Building Services Consultants and Architects. Contact Steve Brown to arrange a visit to your consultancy.
Katsunori Shibata talked about the new CO2 installations such as the recent one in Osaka and explained the performance of the booster system with four compressors, perfectly equipped for low temperature applications.
New chiller requirements go into effect on Jan. 1, 2015. ASHRAE Standard 90.1-2010: Energy Standard for Buildings Except Low-Rise Residential Buildings, Addendum ch details minimum performance requirements of heating and air conditioning equipment, including chillers, boilers, and packaged equipment, which continue to increase from the previous standard.
Equipment efficiencies are increased for heat pumps, packaged terminal air conditioners, single package vertical heat pumps, air conditioners, and evaporative condensers. Additional provisions address commercial refrigeration equipment, improved controls on heat rejection and boiler equipment, requirements for expanded use of energy recovery, small motor efficiencies, and fan power control and credits. Control revision requirements have been added to the standard such as direct digital controls in many applications. Finally, the 2013 edition completes the work that was begun on equipment efficiencies for chillers in the 2010 edition.
While Addendum ch may simplify these requirements for consulting engineers, chiller manufacturers are faced with equipment redesigns to comply by the deadline. Also, designers must pay special attention to which path of compliance will be used when testing chillers with or without variable frequency drives (VFDs).
Re-innovating the CO2 transcritical efficiency for small and medium formatsCAREL Industries S.p.A
The presentation focuses on DC inverter CO2 condensing units for small and medium formats. CAREL's know-how in controlling DC compressors, combined with the top-in- class solution for C-stores and small commercial applications, is driving the European market to finally use natural refrigerants in all applications, even the smaller ones.
This is a recording of a presentation delivered by Qatar Green Leaders at the 2nd Annual Qatar HVAC Contracting Conference held at the Intercontinental Doha on 4th December 2017. The presentation addressed the interrelationships between HVAC design and various high performance goals as defined by LEED & GSAS rating systems.
Qatar Green Leaders
Green Building Certification Management (LEED / GSAS)
Email Address: info@qatargreenleaders.com
Company Profile: http://bit.ly/QGL_pro
Location Map: http://bit.ly/QGLgo
Web Address: www.qatargreenleaders.com
Linked-in Page: http://www.linkedin.com/company/qatar-green-leaders
Facebook Page: https://www.facebook.com/QGL.Doha
Twitter Account: https://twitter.com/qgl2010
YouTube: http://bit.ly/QGL_tube
In this presentation given during Chillventa 2018, Stefano Soggia introduces DC Cella Split, our DC inverter control solution for cold rooms that merges all the benefits of breaking-through solutions like UltraCella, Hecu and EVDice, and provides up to 25% energy savings compared to equivalent on/off technology.
AIRIUS IN WAREHOUSES - The world leaders in Destratification technologyAirius Europe Ltd
The Airius destratification system gently and quietly
recirculates heated or cooled air supplied to equalise
temperatures throughout. This improves comfort, allows
for greater control over temperature regulated
environments and can save up to 50% on your HVAC costs.
When developing data center energy-use estimations, engineers must account for all sources of energy use in the facility. Most energy consumption is obvious: computers, cooling plant and related equipment, lighting, and other miscellaneous electrical loads. Designing efficient and effective data centers is a top priority for consulting engineers. Cooling is a large portion of data center energy use, second only to the IT load. Although there are several options to help maximize HVAC efficiency and minimize energy consumption, data centers come in many shapes, sizes, and configurations. By developing a deep understanding of their client’s data center HVAC requirements, consulting engineers can help maintain the necessary availability level of mission critical applications while reducing energy consumption.
Fuji tu dong hoa catalog frenic-hvac-dienhathe.orgDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
Similar to ClimateWizard_Brochure_AUS_CW005_REVE_0515 NEW (20)
2. | 3climatewizard.com2 |
About Climate Wizard
flexible configurations in
a wide range of industries
Climate Wizard product range
Climate Wizard’s hyper-efficient benefits
Climate Wizard is an air conditioner that uses an indirect evaporative heat
transfer core that provides hyper-efficient cooling of outside air. It delivers
100% fresh, cool, outside air, with greatly reduced energy consumption.
Climate Wizard is a proven technology that has been adopted across the world.
Climate Wizard is the global leader in delivering hyper-efficient cooling technology that covers an
exceptionally large range of flexible configurations in a wide range of industries.
All Climate Wizard installations are fully supported by our experienced team of Climate Wizard
design consultants and engineers to achieve the best result for your specific application.
• Improved Indoor Air Quality (IAQ) with
100% outside air
In stand alone applications, 100% outside air means better
indoor air quality and reduced incidence of “sick building”
syndrome. The Climate Wizard cooling system will far
exceed the Regulatory Standards for outside air ventilation
rates, as Climate Wizard can supply 100% fresh outside air
all the time.
• Reduced load on electrical infrastructure
When summer cooling loads increase, the electrical
demand from refrigerated cooling systems also increase;
leading to higher electrical demand charges.
In contrast, a Climate Wizard’s electrical demand remains
steady even in hot weather, helping you control your
electrical demand charges.
• Ideal for use as a Dedicated Outdoor Air System
(DOAS), data centre cooling, or for comfort
cooling applications
Climate Wizard cools the air to conditions suitable for data
centres, including Class A1 data centres, at ultra-low PUE’s
(Power Usage Efficiency).
• Flexible design and engineering configurations
Climate Wizard is easy to retrofit to existing buildings with
refrigerated air conditioning plants, as well as brand new
projects in a variety of configurations.
• Savings on the installation costs
In some countries, the cost of installing a Climate Wizard
on a new building can be up to 30% cheaper compared to
installing VRF (variable refrigerant flow) equipment.
• No synthetic refrigerants or chemicals to harm
the environment
Climate Wizard does not require any additives to maintain
cooling performance. And, it uses water sparingly, so it
does not require large amounts of water to operate.
• NATA accredited laboratory
Seeley International is Australia’s only air conditioning and
heating manufacturer with a NATA accredited test
laboratory. NATA (National Association of Testing
Authorities) provides assessment, accreditation and training
services to laboratories and technical facilities throughout
Australia and internationally.
• Wiser use of water (R-718)
Climate Wizard is the best technology available to take full
advantage of environmentally friendly R-718. It produces
high quality cooling at high electrical efficiencies.
• Simple, reliable solution to improve COP / EER
and to meet various regulatory requirements
Whether it’s airflow, pressure, cooling capacity, or
efficiency, Climate Wizard tops them all. At Seeley
International, Australia’s largest manufacturer of cooling
and heating solutions, and the leader in developing
energy-efficient cooling technologies, we rigorously test
all of our energy efficient products, to ensure they
surpass all relevant standards.
• Reduced running costs
Climate Wizard can use up to 80% less energy than an
equivalent refrigerated system performing the same duty,
thanks to the unique indirect evaporative heat exchange
core technology.
• No moisture added
Climate Wizard does not add any moisture to the supply air
and can cool the supply air to several degrees below the
ambient wet bulb temperature, which means it can be used
in a very wide range of geographic locations.
*Climate Wizard Supercool adds a small amount of moisture to the
supply air.
• Total cooling performance increases when
air temperature rises
With Climate Wizard, total cooling performance increases
as temperatures increase. This does not happen with either
traditional evaporative cooling, which may not be as
effective at extreme temperatures, or refrigerated air
conditioning, which shows reduced cooling capacity as
temperatures rise.
• Reduce the energy use and improve the cooling
performance of existing refrigerated systems
Climate Wizard can be used on its own or in combination
with refrigerated systems to dramatically reduce energy usage
by pre-cooling outside air. Used with refrigerated systems, it
can also extend the life of the air conditioning plant.
Climate Wizard - indirect evaporative air conditioning
Dramatically reduces energy consumption and cooling costs compared to equivalent refrigerated systems
Climate Wizard Supercool - indirect evaporative cooling with direct evaporative stage
Offers even more hyper-efficient benefits delivering lower temperatures and extremely low operating costs
Climate Wizard Winery - indirect evaporative air conditioning for wine barrel storage rooms
Designed to maintain precise temperature and humidity levels – at very low operating costs
Note: Nominal cooling capacity is based on design conditions of 36.1 ºC db / 17.8 ºC wb. Stand alone cooling capacity may be lower, depending on application.
CW-H15 S
CW-H15 W
CW-80 S
•• COP of up to 26
•• Up to 48 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 1,700 L/s
(6,120 m³/h) supply air
•• COP of up to 19
•• Up to 34 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 1,100 L/s
(3,960 m³/h) supply air
•• COP of up to 19
•• Up to 195 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 7,450 L/s
(26,820 m³/h) supply air
CW-H10
CW-80
CW-H15
CW-160
•• COP of up to 15
•• Up to 20 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 800 L/s
(2,880 m³/h) supply air
•• COP of up to 15
•• Up to 146 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 6,400 L/s
(23,000 m³/h) supply air
•• COP of up to 15
•• Up to 27 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 1,100 L/s
(3,960 m³/h) supply air
•• COP of up to 13
•• Up to 264 kW of cooling
capacity in outside air
pre-cooling applications
•• Up to 11,800 L/s
(42,480 m³/h) supply air
3. | 5climatewizard.com4 |
Climate Wizard’s unique design and performance features
Cabinetry
•• Powder coated, marine
grade aluminium
•• Weather proof and
corrosion resistant
•• Mechanical fasteners are
stainless steel or aluminium
Tornado®
water pump
•• Australian designed and manufactured
•• Exceptional reliability under all conditions
•• Includes “clever impact start” feature that
will overcome any tendency for the pump
to become locked up with residue during
prolonged off periods
•• The strong synchronous motor has constant
speed, independent of voltage fluctuations,
and runs very cool for long life
Supply air fan and electric motor
•• Backward curved, direct drive,
plug fan
•• Variable speed ECM motor for
maximum energy efficiency
•• Ultra-quiet, vibration free
Indirect heat exchange core
•• Patented Climate Wizard counter-flow
heat exchanger
•• Uses indirect evaporative cooling to
keep added moisture separate from
the supply air stream
•• Designed for long service life and
consistent performance
•• Provides maximum efficiency
Supply air pressure damper
•• Regulates air pressure in the
discharge plenum
•• Used to control exhaust flow
in the wet channels
•• Provides simple, positive
capacity control
*Applicable to CW-H10 and CW-H15 models only.
Climate Wizard Supercool
Drip tray
•• Part of the independent water collection
system for the direct evaporative section
•• Corrosion free and self-draining
Water distributor
•• The water distributor delivers a calibrated
volume of water to efficiently supercool the
unit’s leaving air
•• A dedicated pump and water distributor
are used to independently water the direct
evaporative media to maximise versatility
•• The system uses tried and true technology,
developed over many years by Seeley
International
•• Designed to prevent clogging and evenly
water the direct evaporative media
Filter system
•• Intake air is filtered through
replaceable pleated filters
•• The assembly includes:
- a safety screen to protect
the fan
- a cover to minimise
intrusion of rain
Chillcel high efficiency evaporative pad
•• High efficiency, direct-evaporative cooling pad
•• Produces an ultra-low leaving air temperature
with minimal additional moisture
•• Designed to maximise the space cooling
capacity of Climate Wizard Supercool
•• Increases supply airflow
Wall controller
•• Wall controller and a 20 m plugged
control cable, factory supplied
•• Can be configured for
thermostatically controlled VAV
cooling or constant volume cooling
•• Configured to respond to BMS
start-stop inputs applied at the
unit controller
•• Can be replaced by direct BMS
inputs applied directly to the unit
mounted control board
Electronic control module
•• Advanced electronics programmed
for maximum efficiency
•• Controls unit operation to
minimise water consumption
and maximise efficiency
•• Can be configured to accept
external BMS system inputs
to control system operation
(while retaining control of water
management and system efficiency)
•• Smart, reliable, durable
Automatic drain valve
•• Part of the water management
system
•• Controlled to manage water quality
and maximise system efficiency
•• Drains the reservoir during
prolonged idle periods
With Climate Wizard Supercool, the moisture content can be fine-tuned to specifications,
required for different applications, from data centres to wineries.
Water management system
•• Custom designed water management system minimises
water consumption and maximises cleanliness
•• Continuously monitors and controls the water salinity
level in the reservoir
•• Controls water cleanliness using a factory installed
electro-chlorinator
•• Manages water distribution for minimum water
consumption and maximum cooling efficiency
•• Drains the water system during prolonged idle periods
•• Alarms if low water levels are detected
Water reservoir
•• One piece moulded polymer construction
•• Durable and corrosion free
•• Provides excellent sound deadening properties
•• Sloped to prevent standing water when drained CW-H15
4. | 7climatewizard.com6 |
Hot air
Warm moist
exhaust air
Warm
exhaust air
Ultra cooled air
with added moisture
Hot air
Warm moist
exhaust air
Warm
exhaust air
Cool dry air
Stand alone cooling Pre-cooling
Climate Wizard used to provide Stand Alone Cooling. Climate Wizard installed in front of an air conditioning system to provide pre-cooling.
High capacity with high volume module
High capacity Climate Wizard with high volume module (HVM) used to provide
stand alone cooling or be interconnected into a common air handling system.
Climate Wizard Supercool delivers ultra cooled air with added moisture,
that can be fine-tuned to specifications.
Hot air Hot air
Warm moist
exhaust air
Warm
exhaust air
Warm
exhaust air
Cool dry air Cool dry air
Supplementary cooling
Climate Wizard used with an air cooling system to provide supplementary cooling.
Warm moist
exhaust air
Direct air cooler
as wet-box only
Warm
exhaust air
Ultra cooled air
with added moisture
Hot air
Hybrid cooling
Warm moist
exhaust air
Hot air
Warm
exhaust air
Cool or heated air
Hybrid heating
Climate Wizard is combined with other complimentary devices, such as direct evaporative ‘wet-boxes’ or heating devices;
such as elements, hot water coils, gas-fired exchangers to successfully resolve a variety of heat load and comfort challenges.
Reticulation
DX
Customised
to mechanical
specifications
Climate Wizard high volume module can be designed to integrate with other air conditioning equipment supplied by other contractors.
Hot air Hot air
Warm moist
exhaust air
Warm
exhaust air
Cool dry air
Climate Wizard is using an astounding 80% less energy.
This was the perfect solution. There was nothing else that works
as well as this has worked. There’s nothing else out there.
- Joe Walton, Facilities Manager, Tri Tool Inc (USA)
"
"
Climate Wizard can be used in diverse configurations
and a range of applications:
CW-160
5. | 9climatewizard.com8 |
Warm moist exhaust air
discharged from wet channels
(45% of intake airflow)
Exhaust air pushed back
through wet channels
(45% of intake airflow)
100% fresh, cool, supply air
pushed into the building
from dry channels
(55% of intake airflow)
Hot outside air
enters dry channels
Climate Wizard counterflow heat exchanger
Psychrometric chart
Outdoor Temperature (Degrees Celsius DB)
Source: Uni SA Roxby Downs Report June 2009
Line style
Colour key
Refrigerated air
conditioning
Climate Wizard
= Input power
= Cooling capacity
= COP (Coefficient
of performance
%increaseordecrease
-20 -15 -10 -5 0 5 10 15 20 25 30 35 40 45 50
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
25%
2%
4%
6%
8% RELATIVE HUMIDITY
10% RELATIVE HUMIDITY
20%
30%
40%
50%
60%
70%
80%
90%
-15
-15 -10
-10 -5
-5
0
5
5
10
10
15
15
20
20
25
25
30 W
ET BULB
TEMPERATURE
- °C
30
Ambient
Climate Wizard
Climate Wizard
Supercool
Direct Evap Cooler
15%
RELATIVE
HUM
IDITY
Dry Bulb Temperature °C
HumidityratioKJofmoistureperkilogramofdryair
W
etBulb
Temperature°C
The coloured lines on the psychrometric chart
compare Climate Wizard’s performance to that
of a direct evaporative cooler on a hot day.
Barometric Pressure 101.3 kPa
Performance comparison
Climate Wizard vs refrigerated cooling as temperature rises
Chart explanation: Consider fresh air entering the cooler at
38°C dry-bulb and about 15% relative humidity. If the cooler
is a direct evaporative air cooler, the fresh air passes directly
through the wet cooling pad where it becomes cool and also
moist, and emerges at about 22°C dry-bulb and 75% relative
humidity. The process has travelled along the wet-bulb
(orange) line and the air has gained about 6.5 grams/kg of
additional moisture.
In the case of an indirect evaporative air cooler, the fresh
air passes through the dry channel where it is cooled and
emerges at 16°C. But, no moisture has been added as the
cooling process has occurred along the constant moisture
(blue) line. The ‘wet-bulb effectiveness’ of Climate Wizard
can reach 125%, whereas regular direct air coolers have a
wet-bulb effectiveness of about 85%.
The Climate Wizard Supercool has a further direct
evaporative cooling process directly after the indirect
evaporative process. This allows the Supercool to provide an
additional reduction in the supply temperature while adding
minimal water content.
How it works
Climate Wizard indirect evaporative air conditioner uses a hyper-efficient counter-flow
heat exchanger to produce 100% fresh, cool, outside air, with no added moisture.
The fresh cold air produced by Climate Wizard can be equivalent to that produced by
refrigerated systems, with temperatures that approach the ambient dew-point temperature.
- No moisture is transferred across the membranes
between the dry and wet channels; only
temperature (heat) is transferred.
- The heat passes out of the air in the dry channels
through the membrane and into the air passing
through the wet channels.
- In this way, the air in the dry channels becomes
progressively colder but gains no moisture.
3. Warm, moist air exhausted outside
- As the air exits the dry channels, a portion of the
conditioned air is returned through the wet
channels. Through evaporation and conduction, it
gains both moisture and heat. The channels are
continuously soaked with water. This moist, warm air
is then exhausted outside of the building.
1. Hot air enters the cooler
- Hot outside air enters the cooler via the inlet.
- A powerful, energy-efficient, electric fan moves the
air towards the core.
2. Hot air passes through the core
- The core is an air-to-air heat exchanger consisting
of alternating dry and wet channels.
- All of the air passes along the dry channels and
gains no additional moisture.
4. Fresh, cool outside air passes into the building
- The air passing along the dry channels in the core
is cooled, with no moisture added.
- This fresh, cool air passes into the building.
Climate Wizard’s cooling performance can rival
that of refrigerated systems, using up to 80%
less energy. That’s not only great for reducing
power bills; it’s also great for the environment.
And, no matter how hot it gets outside, Climate
Wizard uses the same amount of power and
still delivers 100% fresh, cool air inside. This
is in direct contrast to refrigerated systems,
which require increasing amounts of power as
outside temperatures rise. Climate Wizard’s
cost-saving capabilities actually increase, when
the heat is at its highest. At the same time,
Climate Wizard’s performance also increases as
temperatures rise – again, in complete contrast
to refrigerated systems.
Direct evaporative cooling
Climate Wizard indirect
evaporative air conditioning
Climate Wizard Supercool
indirect evaporative cooling
with direct evaporative stage
6. | 11climatewizard.com10 |
Note: specifications subject to change.
*Based on design conditions of 36.1 C db / 17.8 C wb. Stand alone cooling capacity may be lower, depending on application.
Technical specifications
Climate Wizard Climate Wizard Supercool Climate Wizard Winery
CW-H10 CW-H15 CW-80 CW-160 CW-H15 S CW-80 S CW-H15 W
Nominal cooling capacity* 20 kW 27 kW 146 kW, pre-cooling outside air 264 kW, pre-cooling outside air 48 kW 195 kW, pre-cooling outside air 34 kW
Rated airflow
800 L/s (2,880 m³/h)
at 0 - 200 Pa
1100 L/s (3,960 m³/h)
at 0 - 200 Pa
6,400 L/s (23,000 m³/h) supply,
5,240 L/s (18,860 m³/h) exhaust at
100 Pa external static pressure
11,800 L/s (42,480 m³/h) supply,
9,650 L/s (34,740 m³/h) exhaust at
100 Pa external static pressure
1700 L/s (6,120 m³/h)
at 0 - 120 Pa
7,450 L/s (26,820 m³/h) supply,
3,190 L/s (11,480 m³/h) exhaust at
100 Pa external static pressure
1100 L/s (3,960 m³/h)
at 0 - 140 Pa
Max. external static pressure 215 Pa 190 Pa 250 Pa 250 Pa 120 Pa 250 Pa 140 Pa
Max. inlet air temperature 55 °C 55 °C 55 °C 55 °C 55 °C 55 °C 55 °C
Power requirement 1.4 kW 1.8 kW
Input power - 10.0 kW
at rated airflow
Input power - 20.0 kW
at rated airflow
1.8 kW
Input power - 10.0 kW
at rated airflow
1.8 kW
Electrical supply 3-phase, 380-480 V, 50/60 Hz 3-phase, 380-480 V, 50/60 Hz 3-Phase, 380-480 V, 50/60 Hz 3-Phase, 380-480 V, 50/60 Hz 3-Phase, 380-480 V, 50/60 Hz 3-Phase, 380-480 V, 50/60 Hz 3-Phase, 380-480 V, 50/60 Hz
Water supply
20 L/min delivered at 100 kPa min,
800 kPa max
20 L/min delivered at 100 kPa
min, 800 kPa max
80 L/min delivered at 100 kPa
min, 800 kPa max (External in-line
filtration recommended)
120 L/min delivered at 100 kPa
min, 800 kPa max (External in-line
filtration recommended)
20 L/min delivered at 100 kPa min,
800 kPa max
80 l/min delivered at 100 kPa
min, 800 kPa max (External in-line
filtration recommended)
20 L/min delivered at 100 kPa min,
800 kPa max
Supply air configuration Side discharge Side discharge Side discharge Top discharge Side discharge Side discharge Side discharge
Supply fans
Backward curved centrifugal fan
with direct coupled EC motor
Backward curved centrifugal fan
with direct coupled EC motor
2 x Backward curved centrifugal
fan with direct coupled EC motor
4 x Backward curved centrifugal
fan with direct coupled EC motor
Backward curved centrifugal fan
with direct coupled EC motor
2 x Backward curved centrifugal
fan with direct coupled EC motor
Backward curved centrifugal fan
with direct coupled EC motor
Exhaust fans
Backward curved centrifugal fan
with direct coupled EC motor
Backward curved centrifugal fan
with direct coupled EC motor
4 x Backward curved centrifugal
fan with direct coupled EC motor
8 x Backward curved centrifugal
fan with direct coupled EC motor
Backward curved centrifugal fan
with direct coupled EC motor
4 x Backward curved centrifugal
fan with direct coupled EC motor
Backward curved centrifugal fan
with direct coupled EC motor
Pump Water circulation pump Water circulation pump Water circulation pump Water circulation pump Water circulation pump Water circulation pump Water circulation pump
Low voltage catalytic
chlorinator
2 chlorinators; salinity probe 2 chlorinators; salinity probe 2 chlorinators; salinity probe 2 chlorinators; salinity probe 2 chlorinators; salinity probe 2 chlorinators; salinity probe 2 chlorinators; salinity probe
Drain valve
Low voltage, vertical,
electric drive
Low voltage, vertical,
electric drive
Low voltage, vertical,
electric drive
Low voltage, vertical,
electric drive
Low voltage, vertical,
electric drive
Low voltage, vertical,
electric drive
Low voltage, vertical,
electric drive
Counter-flow
Heat exchange core
2 x Climate Wizard patented
counter-flow heat exchange cores
3 x Climate Wizard patented
counter-flow heat exchange cores
16 x Climate Wizard patented
counter-flow heat exchange cores
32 x Climate Wizard patented
counter-flow heat exchange cores
3 x Climate Wizard patented
counter-flow heat exchange cores
16 x Climate Wizard patented
counter-flow heat exchange cores
3 x Climate Wizard patented
counter-flow heat exchange cores
Air filtration
G4 pleated washable filters with
metal frames
G4 pleated washable filters with
metal frames
16 x G4 pleated washable filters
with metal frames size 625 mm x
625 mm x 45 mm
32 x G4 pleated washable filters
with metal frames size 625 mm x
625 mm x 45 mm
G4 pleated washable filters with
metal frames
16 x G4 pleated washable filters
with metal frames size 625 mm x
625 mm x 45 mm
G4 pleated washable filters with
metal frames
Water reservoir One piece, moulded polymer, 45 L One piece, moulded polymer, 65 L
One piece, moulded polymer,
300 L
One piece, moulded polymer,
300 L
One piece, moulded polymer, 65 L
One piece, moulded polymer,
300 L
One piece, moulded polymer, 65 L
Dimensions
1985 mm (L) x 1230 mm (W) x
1170 mm (H)
1985 mm (L) x 1825 mm (W) x
1170 mm (H)
3,800 mm (L) x 2,570 mm (W) x
3,600 mm (H)
6,600 mm (L) x 2,570 mm (W) x
3,600 mm (H)
1985 mm (L) x 1825 mm (W) x
1170 mm (H)
3,800 mm (L) x 2,570 mm (W) x
3,600 mm (H)
1985 mm (L) x 1825 mm (W) x
1170 mm (H)
Shipping weight 180 kg 220 kg 2,160 kg 4,320 kg 220 kg 2,160 kg 220 kg
Operating weight 225 kg 265 kg 2,620 kg 5,149 kg 265 kg 2,620 kg 265 kg
7. climatewizard.com
Seeley International (Australia) Pty Ltd
112 O’Sullivan Beach Road
Lonsdale SA 5160 Australia
Phone: +61 8 8328 3850
Fax: +61 8 8328 3951
Seeley International Europe (Italy) s.r.l.
Policiano 72M
52100 Arezzo Italy
Phone: +39 0575 97189
Fax: +39 (0)575 1949971
Seeley International (Africa) Pty Ltd
6 Witton Road, Foundersview South
Modderfontein 1609 Gauteng
South Africa
Phone: +27 (0) 11 452 0394
Fax: +27 (0) 86 508 0207
Seeley International (UK) Pty Ltd
Unit 11 Byron Business Centre
Duke Street, Hucknall Nottingham
NG15 7HP United Kingdom
Phone +44 (0)115 9635630
Fax +44 (0)115 9635630 Quality
ISO 9001
Seeley International
Seeley International is Australia’s largest air conditioning
and ducted gas heating manufacturer and a global leader
in developing ingenious, energy-efficient cooling and
heating products.
Our vision is to lead the world in creating climate
control solutions which continue to be highly
innovative, of premium quality and inspirational
in their delivery of energy-efficiency.
But it’s more than just a vision... it’s a way of life!
A commitment to innovation and excellence is at the
heart of all that we do. Our success in delivering on that
commitment has been recognised by our many awards
and our expanding global presence. Seeley International
now exports to well over 120 countries. Not bad for a
company that started out in 1972 in the garage of its
founder and Executive Chairman, Frank Seeley AM FAICD,
who was named South Australian of the Year for 2011!
CatNoCW005REVE(0515)
*Sold only in Australia **Sold only in Australia and South Africa