Clay week 3
•
1 like•185 views
This document provides guidance on working with clay, including maintaining proper water levels, ensuring pieces are properly bonded together, and using gentle pressure rather than force when shaping clay. Key techniques mentioned are slipping and scoring, adding texture after smoothing surfaces, and building thick foundations that can later be carved thinner. The document also lists technical terms and outlines tasks for a three-week sculpture project, including refining bases and completing design boards.
Report
Share
Report
Share
Recommended
Week 2 sculpture
This document provides instructions for a ceramics project over two weeks. It includes:
- In week one, students are asked to create a "Refined Design" board with 2-3 abstract 3D sketches using shading and tone. They should also add technical notes on how they will make their designs.
- In week two, students create a "Final Design" board with at least one drawing annotated with references to researched ceramists and understanding of clay techniques like slip and scoring.
- Key terms are defined like slip and score, moulding, forming, strengthening clay at different moisture levels. Uneven drying and adding too much water are warned against.
- The deadline for
Year 12 3 d design
Week 1 focuses on design and clay techniques introduction. Students will research natural forms, create sketches merging the forms, and develop 3D abstract design concepts. Techniques like slip and score, moulding, and strengthening clay are introduced.
Week 2 involves basic construction of the sculpture's core form using rough sketches for guidance. Students will slip and score clay correctly and focus on thickness and strength.
Week 3 is for refining surfaces, adding textures, and ensuring smoothness before biscuit firing. Research of ceramic artists is also assigned regarding form, color, and surface decoration.
Woodcut
Woodcut is a relief printing technique in printmaking. An artist carves an image into the surface of a block of wood —typically with gouges —leaving the printing parts level with the surface while removing the non-printing parts. Areas that the artist cuts away carry no ink, while characters or images at surface level carry the ink to produce the print. The block is cut along the wood grain (unlike wood engraving, where the block is cut in the end-grain). The surface is covered with ink by rolling over the surface with an ink-covered roller (brayer), leaving ink upon the flat surface but not in the non-printing areas. Multiple colours can be printed by keying the paper to a frame around the woodblocks (using a different block for each colour).
Ceramic Mug Using Slab Construction
How to make a ceramic mug using slab construction. How to use slip & score attachment in ceramics. How to add design and decoration to the surface of ceramics.
Ceramic Pinch Pot Construction
How to make a ceramic pinch pot. How to use slip & score attachment in ceramics. How to add design and decoration to the surface of ceramics.
100 pinch pots project
1) The document provides instructions for a 100 Pinch Pots Project for 1st and 2nd graders and families as part of a Celebration of the Arts event.
2) Students are instructed to get clay and a paper from the supply table, write their name and grade, and use the clay to make a pinch pot with additional decorations using their imagination.
3) The instructions explain how to pinch and shape the clay, attach additional clay pieces using slip, and have their photo taken before cleaning up and taking their finished pot home.
3D drawing
This document provides instructions for creating a 3D layered drawing inside a picture frame or box. The instructions involve tracing the frame to determine dimensions, drawing background and foreground layers separately on paper and foamboard, cutting out the layers, arranging the scene, gluing layers to cardboard and foamboard supports, and adding the finished work to the frame. The end result is a 3D drawing that appears to have depth when viewed through the frame.
3D drawing
This document provides instructions for creating a 3D layered drawing inside a picture frame or box. The instructions involve tracing the frame to determine dimensions, drawing foreground and background pieces separately on paper or foamboard, cutting out the pieces, arranging the layers for depth inside the frame, and attaching the pieces together and to the frame. The finished project creates the illusion of a 3D scene within a flat picture frame through the use of layered drawings and props placed at different depths.
Recommended
Week 2 sculpture
This document provides instructions for a ceramics project over two weeks. It includes:
- In week one, students are asked to create a "Refined Design" board with 2-3 abstract 3D sketches using shading and tone. They should also add technical notes on how they will make their designs.
- In week two, students create a "Final Design" board with at least one drawing annotated with references to researched ceramists and understanding of clay techniques like slip and scoring.
- Key terms are defined like slip and score, moulding, forming, strengthening clay at different moisture levels. Uneven drying and adding too much water are warned against.
- The deadline for
Year 12 3 d design
Week 1 focuses on design and clay techniques introduction. Students will research natural forms, create sketches merging the forms, and develop 3D abstract design concepts. Techniques like slip and score, moulding, and strengthening clay are introduced.
Week 2 involves basic construction of the sculpture's core form using rough sketches for guidance. Students will slip and score clay correctly and focus on thickness and strength.
Week 3 is for refining surfaces, adding textures, and ensuring smoothness before biscuit firing. Research of ceramic artists is also assigned regarding form, color, and surface decoration.
Woodcut
Woodcut is a relief printing technique in printmaking. An artist carves an image into the surface of a block of wood —typically with gouges —leaving the printing parts level with the surface while removing the non-printing parts. Areas that the artist cuts away carry no ink, while characters or images at surface level carry the ink to produce the print. The block is cut along the wood grain (unlike wood engraving, where the block is cut in the end-grain). The surface is covered with ink by rolling over the surface with an ink-covered roller (brayer), leaving ink upon the flat surface but not in the non-printing areas. Multiple colours can be printed by keying the paper to a frame around the woodblocks (using a different block for each colour).
Ceramic Mug Using Slab Construction
How to make a ceramic mug using slab construction. How to use slip & score attachment in ceramics. How to add design and decoration to the surface of ceramics.
Ceramic Pinch Pot Construction
How to make a ceramic pinch pot. How to use slip & score attachment in ceramics. How to add design and decoration to the surface of ceramics.
100 pinch pots project
1) The document provides instructions for a 100 Pinch Pots Project for 1st and 2nd graders and families as part of a Celebration of the Arts event.
2) Students are instructed to get clay and a paper from the supply table, write their name and grade, and use the clay to make a pinch pot with additional decorations using their imagination.
3) The instructions explain how to pinch and shape the clay, attach additional clay pieces using slip, and have their photo taken before cleaning up and taking their finished pot home.
3D drawing
This document provides instructions for creating a 3D layered drawing inside a picture frame or box. The instructions involve tracing the frame to determine dimensions, drawing background and foreground layers separately on paper and foamboard, cutting out the layers, arranging the scene, gluing layers to cardboard and foamboard supports, and adding the finished work to the frame. The end result is a 3D drawing that appears to have depth when viewed through the frame.
3D drawing
This document provides instructions for creating a 3D layered drawing inside a picture frame or box. The instructions involve tracing the frame to determine dimensions, drawing foreground and background pieces separately on paper or foamboard, cutting out the pieces, arranging the layers for depth inside the frame, and attaching the pieces together and to the frame. The finished project creates the illusion of a 3D scene within a flat picture frame through the use of layered drawings and props placed at different depths.
Introduction to clay
This document provides an introduction to working with clay ceramics. It discusses that clay is created from the decomposition of igneous rock and involves the interplay of moisture, plasticity, and heat. The origins of ceramics date back to when people first learned to control fire. The document then covers properties of clay like plasticity, shrinkage, texture and moisture. It provides instructions for preparing clay, such as kneading or wedging to remove air bubbles. Various stages of clay are defined, from plastic to leather-hard to bisqueware and glazeware. Safety tips are also provided for handling clay.
Introduction to clay
Clay is created from the decomposition of igneous rock and contains moisture, plasticity, and is shaped through the application of heat. Ceramics has the longest history of the arts dating back to when people first learned to control fire and began modeling clay. Raw clay is dug from the ground and processed to remove impurities before use. Clay goes through various stages as it dries from plastic to leather-hard to bone dry before firing turns it into bisqueware or glazeware.
Resin casting
Resin casting is a method of plastic casting where a mold is filled with liquid synthetic resin that then hardens. The process involves measuring the resin and catalyst amounts needed, thoroughly mixing them, pouring the resin into the mold in layers, allowing each layer to gel before adding embedments or additional layers, and finishing the back of the casting. Defects like air bubbles can be prevented by pouring some resin into the mold before adding embedments and gently pressing them to release trapped bubbles.
Survival guide
This document provides instructions for basic clay joining techniques and tips for ensuring clay projects survive the firing process. The key joining steps are to apply slip (clay liquid) to the surfaces, score the surfaces with a fork, and firmly press and blend the clay together at the seam. To avoid explosions during firing, clay pieces should not be too thick, should avoid trapped air pockets, and must be completely dry before firing. Proper drying and storage methods are also outlined.
porcelain tiles
MANY OF THEM COME ACROSS MANY TILES BUT MIGHT NOT KNOW THE REAL USE OF IT OR HOW IT CAN BE USED IN MANY WAYS.THIS PPT CONTAINS INFORMATION ABOUT THE PARTICULAR TILE KNOWN AS PORCELAIN.NOT MANY OF THEM COME ACROSS THIS SO EVENTUALLY IT LEADS TO NO KNOWLEDGE ABOUT THE TILES WHICH CAN USED EFFICIENTLY.I HOPE THIS PPT MIGHT BECOME USEFUL FOR MANY. THANKYOU .
Mud soil
This document provides information on various mud construction techniques, including soil testing methods, stabilization techniques, and specific roofing methods like the Guna vault roof and Nubian dome. Some key points:
- Various field and lab tests are described to determine the composition and properties of soils for construction, including color, texture, biscuit, and sieve tests.
- Stabilization techniques can improve soil properties by adding materials like cement, straw or plant juices.
- The Guna vault roof is made from tapered burnt clay pipes socketed together in arches to form a strong, lightweight roof.
- The Nubian dome technique builds vaults and domes without centering by laying courses almost
Research presentation a
This document provides instructions for creating molds and casting duplicates of objects. It discusses:
- Casting involves creating identical copies of a master object through mold-making and pouring casting material.
- Common mold materials include silicone, plaster, resin, latex, with silicone being best for detail and longevity.
- Molds must be designed to allow duplicates to be removed without getting stuck on undercuts. This may require two-part molds or repositioning the master.
- A step-by-step process is described for making a two-part silicone mold for a resin piece, including adding keys to ensure proper alignment of the mold parts.
Mold making project intro sculpture
This document provides instructions for a mold making project where students will create molds and casts of everyday objects. The objectives are for students to explore repetition by creating at least 20 casts from two-part molds. Students must create molds of objects no larger than a shoebox and use at least 3 casting materials like chocolate, jelly or plaster. Students will also develop a concept, research artists, and brainstorm ideas before installing their casts in a site and documenting it. Safety guidelines are provided for casting at home with materials like plaster, clay or edible substances. Step-by-step instructions explain how to make two-part molds and hollow casts.
Introduction to ceramics
This document provides instructions for a ceramics and sculpture course. It discusses various techniques for working with clay including wedging, scoring, slip, and the stages of clay from slip to bisqueware. It outlines three handbuilding techniques - pinch pots, coiling, and slab rolling - that students will use to create small pots. Safety tips are provided such as covering clay to prevent drying out and handling clay projects carefully.
Gr 10 clay and Figure Drawing
The document provides instructions for working with clay in a studio, including important safety rules, tools used, clay stages, processes like wedging and scoring, techniques for clay vessels and figurative sculpture, glazing methods, and guidelines for an artist statement. Key points are that clay and glazes contain silica so dust must be avoided, clay must stay moist while working and tools/hands cleaned to prevent drain clogs, and firing is needed to make clay and glaze permanent.
Intro To Clay
This document provides instructions for working with clay, including proper handling and storage of clay, cleaning procedures, and various hand-building techniques like slab building, coiling, and pinching. It discusses using slab techniques to create parts of a goblet like the cup or stem, and coiling or pinching to form other parts. The document emphasizes being patient, experimenting to solve problems, and not worrying about surface design until building the basic form is complete.
Gr 10 Figurative Clay Sculpture
This document provides instructions for working with clay, including important safety rules and cleaning procedures. It outlines the various tools used for sculpting with clay, such as modeling tools, ribs, and pin tools. It describes the different stages of working with clay from greenware to bisque ware to glaze ware. The document instructs students on processes like wedging, scoring, and welding clay together. It provides guidance on maintaining even thickness and drying clay evenly. Finally, it outlines assignments for making a clay vessel and figurative sculpture, including adding texture and glazing the finished pieces.
Working with Clay
This document provides information on working with clay, including its properties, texture, moisture content, handling, and safety precautions. It defines important terms related to the stages of clay such as leather hard, bone dry, bisque, and greenware. Scanning steps are also outlined to analyze the sensory, formal, expressive, and technical qualities of ceramic works.
Year 12 Personal Study Task 1.ppt
The document provides instructions for students to choose a topic for their personal study project. It advises students to create a Pinterest board of ideas, then make two mood boards exploring their theme more broadly and narrowly. To gain high marks, the second mood board should clearly explain the student's theme, concept, and direction for their project by answering questions about what interests them, the specific area they will explore, any photography needed, and the artwork they plan to create.
GCSE Art Further Development board.ppt
This document provides instructions for a student to complete a second Design Development board. The board should include final photographs for their outcome, their main artist inspiration with an explanation, topic research and explanation, and any further experiments needed before the final idea board. If the student feels this board would be repetitive, they should ask their teacher if they can complete an extra observation, topic research, or artist board instead to further support their topic.
GCSE + A Level Development.ppt
This document provides instructions for students to develop their ideas for a final art project through creating a design development board. It explains that students should explore one idea in depth by including possible photographs, artist inspiration, and painting experiments on their board. Students are asked to explain how these elements link to their concept and will work for their chosen media. The document also provides prompts for students to describe their idea, its link to their theme and concept, the primary imagery, relevant artists, and technical considerations for their final outcome. It encourages students to create at least one design development board over the upcoming week and Easter break to help determine their 10 hour exam project.
Experimenting Exam Task.ppt
This document provides ideas and instructions for media experiments. It lists various materials that could be used, such as pencil, paint, photography, and sewing. It then shows examples of techniques like tonal pencil drawings, photoshop filters, darkroom photography, cyanotypes, etching, monoprinting, and image transfers. Students are instructed to create at least two large experiment boards over two weeks using different media, ideally including the medium that will be used for their final project outcome. They should use their own photographs and link their work to artists for additional credit.
Year 10 Art Week 19.ppt
You are instructed to complete painting experiments in your sketchbook using the underpainting technique you learned from color observations. You have two options for laying out the painting experiment pages - either completing a painting of the whole image and close up across a double page, or doing close up sections of the image across multiple pages along with information about an artist who inspired your technique.
Year 10 Art Week 18.ppt
This document provides instructions for students to edit a photograph in Photoshop and document the process. It instructs students to take screenshots as they edit the photo using tools like crop, brightness/contrast, and color balance. Students are asked to add the tool name and a short explanation of each edit. They should then print the final edited photo and a zoomed in section to use as references for a canvas painting, due on March 6th.
GCSE + A Level Task 3.ppt
Over the next two weeks, students are required to create at least one A2 observational board using photographs. This will earn marks in several assessment categories. The board must include at least one A2/A3 drawing and a series of A4/A5 drawings. Students should choose appropriate media for their theme and style of working with guidance from their teacher. Examples of drawing techniques like continuous line drawing and drawing with two pencils bound together are provided.
Year 10 Art Week 17.ppt
The document provides instructions for an art project involving creating a canvas painting. Students are told to bring in their own canvas no smaller than A3 in size. If a student is unable to obtain a canvas, the art department will provide one. Students are then directed to complete a mood board of paintings by their chosen artist to inspire their project. They are also to include their photo reference printed slightly smaller than A4 with a short explanation of why they chose that photo. The instructions also guide students through some basic edits of their photo reference in Photoshop, such as cropping, adjusting brightness and contrast, and color balance, to refine the image for their canvas painting. Screenshots should be taken of each edit step.
Exam Task 2.ppt
The document provides instructions for students to present photographs on A2 boards with short explanations linked to their theme. It also instructs students to complete their second artist board using the provided sheet to link their work to an artist, and suggests taking their own photograph in the style of the artist. Finally, it prompts students to choose photographs to use for observational artwork the following week and print them at A4 size.
More Related Content
Similar to Clay week 3
Introduction to clay
This document provides an introduction to working with clay ceramics. It discusses that clay is created from the decomposition of igneous rock and involves the interplay of moisture, plasticity, and heat. The origins of ceramics date back to when people first learned to control fire. The document then covers properties of clay like plasticity, shrinkage, texture and moisture. It provides instructions for preparing clay, such as kneading or wedging to remove air bubbles. Various stages of clay are defined, from plastic to leather-hard to bisqueware and glazeware. Safety tips are also provided for handling clay.
Introduction to clay
Clay is created from the decomposition of igneous rock and contains moisture, plasticity, and is shaped through the application of heat. Ceramics has the longest history of the arts dating back to when people first learned to control fire and began modeling clay. Raw clay is dug from the ground and processed to remove impurities before use. Clay goes through various stages as it dries from plastic to leather-hard to bone dry before firing turns it into bisqueware or glazeware.
Resin casting
Resin casting is a method of plastic casting where a mold is filled with liquid synthetic resin that then hardens. The process involves measuring the resin and catalyst amounts needed, thoroughly mixing them, pouring the resin into the mold in layers, allowing each layer to gel before adding embedments or additional layers, and finishing the back of the casting. Defects like air bubbles can be prevented by pouring some resin into the mold before adding embedments and gently pressing them to release trapped bubbles.
Survival guide
This document provides instructions for basic clay joining techniques and tips for ensuring clay projects survive the firing process. The key joining steps are to apply slip (clay liquid) to the surfaces, score the surfaces with a fork, and firmly press and blend the clay together at the seam. To avoid explosions during firing, clay pieces should not be too thick, should avoid trapped air pockets, and must be completely dry before firing. Proper drying and storage methods are also outlined.
porcelain tiles
MANY OF THEM COME ACROSS MANY TILES BUT MIGHT NOT KNOW THE REAL USE OF IT OR HOW IT CAN BE USED IN MANY WAYS.THIS PPT CONTAINS INFORMATION ABOUT THE PARTICULAR TILE KNOWN AS PORCELAIN.NOT MANY OF THEM COME ACROSS THIS SO EVENTUALLY IT LEADS TO NO KNOWLEDGE ABOUT THE TILES WHICH CAN USED EFFICIENTLY.I HOPE THIS PPT MIGHT BECOME USEFUL FOR MANY. THANKYOU .
Mud soil
This document provides information on various mud construction techniques, including soil testing methods, stabilization techniques, and specific roofing methods like the Guna vault roof and Nubian dome. Some key points:
- Various field and lab tests are described to determine the composition and properties of soils for construction, including color, texture, biscuit, and sieve tests.
- Stabilization techniques can improve soil properties by adding materials like cement, straw or plant juices.
- The Guna vault roof is made from tapered burnt clay pipes socketed together in arches to form a strong, lightweight roof.
- The Nubian dome technique builds vaults and domes without centering by laying courses almost
Research presentation a
This document provides instructions for creating molds and casting duplicates of objects. It discusses:
- Casting involves creating identical copies of a master object through mold-making and pouring casting material.
- Common mold materials include silicone, plaster, resin, latex, with silicone being best for detail and longevity.
- Molds must be designed to allow duplicates to be removed without getting stuck on undercuts. This may require two-part molds or repositioning the master.
- A step-by-step process is described for making a two-part silicone mold for a resin piece, including adding keys to ensure proper alignment of the mold parts.
Mold making project intro sculpture
This document provides instructions for a mold making project where students will create molds and casts of everyday objects. The objectives are for students to explore repetition by creating at least 20 casts from two-part molds. Students must create molds of objects no larger than a shoebox and use at least 3 casting materials like chocolate, jelly or plaster. Students will also develop a concept, research artists, and brainstorm ideas before installing their casts in a site and documenting it. Safety guidelines are provided for casting at home with materials like plaster, clay or edible substances. Step-by-step instructions explain how to make two-part molds and hollow casts.
Introduction to ceramics
This document provides instructions for a ceramics and sculpture course. It discusses various techniques for working with clay including wedging, scoring, slip, and the stages of clay from slip to bisqueware. It outlines three handbuilding techniques - pinch pots, coiling, and slab rolling - that students will use to create small pots. Safety tips are provided such as covering clay to prevent drying out and handling clay projects carefully.
Gr 10 clay and Figure Drawing
The document provides instructions for working with clay in a studio, including important safety rules, tools used, clay stages, processes like wedging and scoring, techniques for clay vessels and figurative sculpture, glazing methods, and guidelines for an artist statement. Key points are that clay and glazes contain silica so dust must be avoided, clay must stay moist while working and tools/hands cleaned to prevent drain clogs, and firing is needed to make clay and glaze permanent.
Intro To Clay
This document provides instructions for working with clay, including proper handling and storage of clay, cleaning procedures, and various hand-building techniques like slab building, coiling, and pinching. It discusses using slab techniques to create parts of a goblet like the cup or stem, and coiling or pinching to form other parts. The document emphasizes being patient, experimenting to solve problems, and not worrying about surface design until building the basic form is complete.
Gr 10 Figurative Clay Sculpture
This document provides instructions for working with clay, including important safety rules and cleaning procedures. It outlines the various tools used for sculpting with clay, such as modeling tools, ribs, and pin tools. It describes the different stages of working with clay from greenware to bisque ware to glaze ware. The document instructs students on processes like wedging, scoring, and welding clay together. It provides guidance on maintaining even thickness and drying clay evenly. Finally, it outlines assignments for making a clay vessel and figurative sculpture, including adding texture and glazing the finished pieces.
Working with Clay
This document provides information on working with clay, including its properties, texture, moisture content, handling, and safety precautions. It defines important terms related to the stages of clay such as leather hard, bone dry, bisque, and greenware. Scanning steps are also outlined to analyze the sensory, formal, expressive, and technical qualities of ceramic works.
Similar to Clay week 3 (13)
More from missfcmay
Year 12 Personal Study Task 1.ppt
The document provides instructions for students to choose a topic for their personal study project. It advises students to create a Pinterest board of ideas, then make two mood boards exploring their theme more broadly and narrowly. To gain high marks, the second mood board should clearly explain the student's theme, concept, and direction for their project by answering questions about what interests them, the specific area they will explore, any photography needed, and the artwork they plan to create.
GCSE Art Further Development board.ppt
This document provides instructions for a student to complete a second Design Development board. The board should include final photographs for their outcome, their main artist inspiration with an explanation, topic research and explanation, and any further experiments needed before the final idea board. If the student feels this board would be repetitive, they should ask their teacher if they can complete an extra observation, topic research, or artist board instead to further support their topic.
GCSE + A Level Development.ppt
This document provides instructions for students to develop their ideas for a final art project through creating a design development board. It explains that students should explore one idea in depth by including possible photographs, artist inspiration, and painting experiments on their board. Students are asked to explain how these elements link to their concept and will work for their chosen media. The document also provides prompts for students to describe their idea, its link to their theme and concept, the primary imagery, relevant artists, and technical considerations for their final outcome. It encourages students to create at least one design development board over the upcoming week and Easter break to help determine their 10 hour exam project.
Experimenting Exam Task.ppt
This document provides ideas and instructions for media experiments. It lists various materials that could be used, such as pencil, paint, photography, and sewing. It then shows examples of techniques like tonal pencil drawings, photoshop filters, darkroom photography, cyanotypes, etching, monoprinting, and image transfers. Students are instructed to create at least two large experiment boards over two weeks using different media, ideally including the medium that will be used for their final project outcome. They should use their own photographs and link their work to artists for additional credit.
Year 10 Art Week 19.ppt
You are instructed to complete painting experiments in your sketchbook using the underpainting technique you learned from color observations. You have two options for laying out the painting experiment pages - either completing a painting of the whole image and close up across a double page, or doing close up sections of the image across multiple pages along with information about an artist who inspired your technique.
Year 10 Art Week 18.ppt
This document provides instructions for students to edit a photograph in Photoshop and document the process. It instructs students to take screenshots as they edit the photo using tools like crop, brightness/contrast, and color balance. Students are asked to add the tool name and a short explanation of each edit. They should then print the final edited photo and a zoomed in section to use as references for a canvas painting, due on March 6th.
GCSE + A Level Task 3.ppt
Over the next two weeks, students are required to create at least one A2 observational board using photographs. This will earn marks in several assessment categories. The board must include at least one A2/A3 drawing and a series of A4/A5 drawings. Students should choose appropriate media for their theme and style of working with guidance from their teacher. Examples of drawing techniques like continuous line drawing and drawing with two pencils bound together are provided.
Year 10 Art Week 17.ppt
The document provides instructions for an art project involving creating a canvas painting. Students are told to bring in their own canvas no smaller than A3 in size. If a student is unable to obtain a canvas, the art department will provide one. Students are then directed to complete a mood board of paintings by their chosen artist to inspire their project. They are also to include their photo reference printed slightly smaller than A4 with a short explanation of why they chose that photo. The instructions also guide students through some basic edits of their photo reference in Photoshop, such as cropping, adjusting brightness and contrast, and color balance, to refine the image for their canvas painting. Screenshots should be taken of each edit step.
Exam Task 2.ppt
The document provides instructions for students to present photographs on A2 boards with short explanations linked to their theme. It also instructs students to complete their second artist board using the provided sheet to link their work to an artist, and suggests taking their own photograph in the style of the artist. Finally, it prompts students to choose photographs to use for observational artwork the following week and print them at A4 size.
Half Term Work.ppt
The document provides instructions for a painting assignment, asking the student to complete a double page report on their chosen artist, buy a large canvas, and have a photo ready for guidance from their teacher. It also mentions completing targets, suggestions, and other assigned work over the upcoming half term break.
Year 13 Art Exam Week 1.ppt
The document provides guidance on developing a project around a chosen theme. It instructs the reader to explain their theme and the specific concept or area within the theme they want to explore. It suggests creating a mood board and written explanation of the planned project direction. It then asks the reader to answer questions about why they chose the theme, what area they will explore, what photographs and artwork they will create. Finally, it outlines tasks for the following Monday, including adding a theme direction to the mood board, completing an artist board with their own photograph and transcription, and taking photos and researching a second artist.
Year 13 Art Exam 2023 .ppt
For the art exam, students must show evidence of exploring the theme from different angles by looking at other artists' work, experimenting with materials, documenting ideas, and creating a final piece. It is important to begin working on the exam straight away by choosing a theme, creating a Pinterest board and spider diagram, and starting an artist board with examples that link to the chosen theme. Though the themes are meant to inspire students, they can take the project in any direction as long as they explain how the theme influenced their thoughts and ideas.
Year 11 Art Week 11.ppt
The document instructs the reader to add a 'Process and Evaluation' page to their sketchbook for their Personal Outcome. This page should show examples of their piece and use the 'Evaluation Ideas' sheet to support writing an evaluation of their work.
Year 10 Art Week 16.ppt
The document provides instructions for students to complete assignments related to an observational painting project. Students are asked to print photographs of their painting stages and complete a double page explaining underpainting and process. They should also fully complete a color observations double page with details on color, shade, and tone, and bring in their chosen photograph for the project on a memory stick or email in JPEG format. The document notes students have two more weeks to fully complete their painting work.
Year 10 Art Week 15.ppt
The document provides instructions for creating an underpainting and painting of fruit or vegetables in multiple steps:
1. Draw the fruit or vegetables from different angles and perspectives and photograph the drawings.
2. Apply a monochromatic wash or tonal layer of paint to the entire canvas as an underpainting, which will provide harmony and set the mood.
3. Add block colors to the fruit or vegetables to establish dark and light areas as the foundation for further refining and detailing the painting.
Year 12 Art Week Twelve.ppt
This document provides instructions for an art installation project with a deadline of January 30th. Students are asked to create an example section or sections of their installation, photograph it, and include it on their project page. They should also illustrate or digitally impose their vision of the installation into the intended space. Students are reminded to make sure all work is fully up to date as they will be starting their mock exam project next.
Year 11 Art Final Weeks.ppt
You have three weeks to fully complete your Personal Final Outcome, as finishing this piece to a high quality could boost your grade. You must also make sure all work from the past two years is fully completed, as you will not be able to access any of this past work after January 30th.
Year 10 Art Week 14.ppt
The document provides instructions for an art assignment that requires students to complete a two-page report on an artist who uses color in their work. The report must include the artist's name, facts and opinions about how the artist uses color theory, and a copy of one of the artist's works. Students are also instructed to create a second page with their own photograph and a copy of the photo in the style of the featured artist.
Year 12 Art Instillation Week 1.ppt
Installation art is a genre of contemporary art in which artists arrange objects or materials in a space, such as a room or warehouse, to create an artwork. The resulting configuration of the space and materials comprises the installation. Viewers can enter and move through the space, interacting with elements and experiencing the artwork in a more immersive, multi-sensory way compared to traditional static art forms. Installation art is influenced by developments in areas like computer art, video/film, theater, dance, architecture and interior design. More than craftsmanship, installation art emphasizes ideas, experiences and impact over a finished product. It allows viewers to experience and rethink their attitudes within a temporary physical artwork.
More from missfcmay (20)
Recently uploaded
Full CAD Project Cardiovascuwhore Debut PDF CAD Meena Pittman
Full CAD Project Cardiovascuwhore Debut PDF CAD
Meena Pittman
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKAKalyan chart DP boss guessing matka number
Satta Matka Kalyan Main Mumbai Fastest Results
Satta Matka ❋ Sattamatka ❋ New Mumbai Ratan Satta Matka ❋ Fast Matka ❋ Milan Market ❋ Kalyan Matka Results ❋ Satta Game ❋ Matka Game ❋ Satta Matka ❋ Kalyan Satta Matka ❋ Mumbai Main ❋ Online Matka Results ❋ Satta Matka Tips ❋ Milan Chart ❋ Satta Matka Boss❋ New Star Day ❋ Satta King ❋ Live Satta Matka Results ❋ Satta Matka Company ❋ Indian Matka ❋ Satta Matka 143❋ Kalyan Night Matka..
哪里办理(sjsu毕业证书)美国圣何塞州立大学毕业证硕士文凭证书原版一模一样
原版定制【微信:bwp0011】《(sjsu毕业证书)美国圣何塞州立大学毕业证硕士文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpboss Matka Guessing➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka GuessingKALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Satta Matta Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA哪里购买(ucr毕业证书)美国加州大学河滨分校毕业证研究生文凭证书原版一模一样
原版定制【微信:bwp0011】《(ucr毕业证书)美国加州大学河滨分校毕业证研究生文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Kalyan Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Kalyan Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKASatta matka guessing matka Kalyan chart
SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA RESULT KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA WEBSITE FIX FIX MATKA NUMBER INDIA.S NO1 WEBSITE TTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA FIX FIX MATKA NUMBER FIX MATKANUMBER FIX FIX FIX MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA SATTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA WAPKA.FIX FIX FIX
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKARecently uploaded (20)
Full CAD Project Cardiovascuwhore Debut PDF CAD Meena Pittman
Full CAD Project Cardiovascuwhore Debut PDF CAD Meena Pittman
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
➒➌➎➏➑➐➋➑➐➐ Dpboss Matka Guessing Satta Matka Kalyan panel Chart Indian Matka ...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
THUNDERDEVILS_COPERNICUS_SAMPLEBOARD_CAT_ZYGOCKIpdf
THUNDERDEVILS_COPERNICUS_SAMPLEBOARD_CAT_ZYGOCKIpdf
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
Dpboss Matka Guessing Satta Matta Matka Kalyan panel Chart Indian Matka Dpbos...
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Kalyan Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Kalyan Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
Clay week 3
- 4. Understanding Your Clay Water levels are key to successful clay work, soft clay can do certain things whilst other effects may need harder clay that has less water. Clay will dry out between lessons even when wrapped in plastic. You can soften clay over time, do not add lots of water and create a slippery surface. This will also weaken your structure. Ensure you slip and score well so as the clay dries parts do not fall off, it must bond correctly. Nothing thicker than an inch – use scooping out or air holes to ensure trapped air can escape. Smooth off surfaces with your fingers and thumb (NOT WATER) before adding texture or surface. Use ten small gentle pressures/presses rather than one hard shove to move/form/mold the clay.
- 8. Key Technical Terms • Slip & score • Soft clay • Moulding • Shaping • Forming • Base • Strengthen • Hardened • Leather hard • Carve • Surface texture • Form • Smoothing • Balance • Space • Thick - thin
- 9. Basic construction Task: using the techniques introduced, build the main core form of your sculpture. •ENSURE you slip and score correctly •Think THICK & STRONG (you can always carve more away later) Week Three: Lesson 1
- 10. Begin to refine the base : add clay sections, carve and start to mould/smooth the form. You may want to make extra sections to harden for next week, ready to slip and score onto your main base. Week Three: Lesson 2 + 3
- 11. -Complete and update your developed design boards -Begin to create your sculpture Beaumont Pinterest: http://pinterest.com/beaumontart/ Beaumont Blog: http://artatbeaumontschool.blogspot.co.uk Deadline: 3rd February This week……