Chris Gartner has over 30 years of experience in data management, project coordination, and graphic design. He currently works as an SAP Data Coordinator at Mitsubishi Motors Australia, where he is responsible for maintaining the integrity of master data in SAP and creating reports. Previously, he worked in various roles at Mitsubishi Motors Australia involving technical publications, project coordination, and as a subject matter expert for parts master data migration to SAP. He also has experience as a technical illustrator, model maker, and draftsman for the Royal Australian Air Force and industrial design firms.
Raj Deep Singh is an automotive design engineer with over 5 years of experience in designing interior and exterior automotive components. He has expertise in CAD tools like NX 9 and Catia V5 and has experience leading projects from design to testing and implementation. His career includes roles with companies like Poly Plastic India, Mahindra Engineering, and Group Autodeco where he was responsible for product design, feasibility studies, mold design, and generating technical drawings.
This presentation discusses how business architecture can help business analysts align requirements with corporate business strategies. It defines business architecture as a blueprint used to align strategic objectives and tactical demands. The presentation covers topics such as the business architecture guild, various business architecture maps and models, how business architecture matters by focusing strategies and improving decision-making, and when business architecture is used such as during mergers and system upgrades.
Bruce Hajdyla E Portfolio 2012 Experience Summaryfleet1wood
Bruce D. Hajdyla has over 20 years of experience in automotive product development and project management. He has worked for companies like Ford Motor Company, Dura Convertible Systems, and LED lighting manufacturers. Hajdyla has expertise in vehicle engineering, prototyping, manufacturing, quality assurance, and supplier coordination on both domestic and international projects. He holds a BS in Manufacturing Technology from Eastern Michigan University and has received additional training in project management, CAD software, quality systems, and supply chain management.
VCS.REDDY has over 12 years of experience as a PLM Consultant with expertise in Teamcenter Administration, configuration and support. He has worked on numerous product design and migration projects using CAD tools like NX and Ideas. Some of his core competencies include Teamcenter Administration, CAD integrations, project planning, and technical skills like Teamcenter, NX, Pro-E, and CATIA. His most recent role involved providing direct support to engineering teams at Case New Holland, ensuring processes were followed and data was properly released.
Hemant Kumar Nayak is a consultant and project lead with over 18 years of experience in IT, including 12+ years of experience leading technical and functional teams for projects involving MES, SAP, i2, and system integration. He has extensive experience implementing, upgrading, and supporting MES, SAP, automation systems, and their integration. Some of his responsibilities have included business process analysis, product mapping, system configuration, testing, change management, and team management. He has technical skills in databases, programming languages, front-end tools, and operating systems.
This document contains the resume of Mostafa Elkazmi, a mechanical engineer with over 10 years of experience in design, project management, and overseeing projects from conception to completion. He has extensive experience in piping design, CAD software such as AutoCAD and SolidWorks, and mechanical design. His resume highlights his technical skills and qualifications, as well as his education and professional experience working on projects in Libya.
IRJET- Design Automation of Flange Coupling using NX 10.0IRJET Journal
This document discusses customizing NX 10.0 CAD/CAM software to automate the design of flange couplings. It involves developing a program using Visual Studio that integrates with NX and allows users to input parameters for a flange coupling design. The program then generates the 3D part and assembly models within NX. The customization is meant to improve productivity by reducing design time and errors for standardized components. It also aims to make the design process more accessible to users without CAD expertise. The document provides details on the programming approach, integration with NX, various customization levels in CAD software, and concludes the approach saves time and costs for companies that frequently design similar components.
The document outlines the work experience and qualifications of Sreekumar Knayipallil, including over 15 years of experience as a draftsman working on projects in Saudi Arabia for companies like Sumitomo Corporation Japan, Abdulla Fouad Holding Co., and Madi Al-Hajri Group Co., with responsibilities including preparing engineering drawings using AutoCAD and MicroStation. Sreekumar has extensive experience in civil, mechanical, electrical, and communication drafting and holds certificates in AutoCAD, MicroStation, and as a civil draftsman from training programs in India. He provides references from previous employers and managers to attest to his drafting skills and
Raj Deep Singh is an automotive design engineer with over 5 years of experience in designing interior and exterior automotive components. He has expertise in CAD tools like NX 9 and Catia V5 and has experience leading projects from design to testing and implementation. His career includes roles with companies like Poly Plastic India, Mahindra Engineering, and Group Autodeco where he was responsible for product design, feasibility studies, mold design, and generating technical drawings.
This presentation discusses how business architecture can help business analysts align requirements with corporate business strategies. It defines business architecture as a blueprint used to align strategic objectives and tactical demands. The presentation covers topics such as the business architecture guild, various business architecture maps and models, how business architecture matters by focusing strategies and improving decision-making, and when business architecture is used such as during mergers and system upgrades.
Bruce Hajdyla E Portfolio 2012 Experience Summaryfleet1wood
Bruce D. Hajdyla has over 20 years of experience in automotive product development and project management. He has worked for companies like Ford Motor Company, Dura Convertible Systems, and LED lighting manufacturers. Hajdyla has expertise in vehicle engineering, prototyping, manufacturing, quality assurance, and supplier coordination on both domestic and international projects. He holds a BS in Manufacturing Technology from Eastern Michigan University and has received additional training in project management, CAD software, quality systems, and supply chain management.
VCS.REDDY has over 12 years of experience as a PLM Consultant with expertise in Teamcenter Administration, configuration and support. He has worked on numerous product design and migration projects using CAD tools like NX and Ideas. Some of his core competencies include Teamcenter Administration, CAD integrations, project planning, and technical skills like Teamcenter, NX, Pro-E, and CATIA. His most recent role involved providing direct support to engineering teams at Case New Holland, ensuring processes were followed and data was properly released.
Hemant Kumar Nayak is a consultant and project lead with over 18 years of experience in IT, including 12+ years of experience leading technical and functional teams for projects involving MES, SAP, i2, and system integration. He has extensive experience implementing, upgrading, and supporting MES, SAP, automation systems, and their integration. Some of his responsibilities have included business process analysis, product mapping, system configuration, testing, change management, and team management. He has technical skills in databases, programming languages, front-end tools, and operating systems.
This document contains the resume of Mostafa Elkazmi, a mechanical engineer with over 10 years of experience in design, project management, and overseeing projects from conception to completion. He has extensive experience in piping design, CAD software such as AutoCAD and SolidWorks, and mechanical design. His resume highlights his technical skills and qualifications, as well as his education and professional experience working on projects in Libya.
IRJET- Design Automation of Flange Coupling using NX 10.0IRJET Journal
This document discusses customizing NX 10.0 CAD/CAM software to automate the design of flange couplings. It involves developing a program using Visual Studio that integrates with NX and allows users to input parameters for a flange coupling design. The program then generates the 3D part and assembly models within NX. The customization is meant to improve productivity by reducing design time and errors for standardized components. It also aims to make the design process more accessible to users without CAD expertise. The document provides details on the programming approach, integration with NX, various customization levels in CAD software, and concludes the approach saves time and costs for companies that frequently design similar components.
The document outlines the work experience and qualifications of Sreekumar Knayipallil, including over 15 years of experience as a draftsman working on projects in Saudi Arabia for companies like Sumitomo Corporation Japan, Abdulla Fouad Holding Co., and Madi Al-Hajri Group Co., with responsibilities including preparing engineering drawings using AutoCAD and MicroStation. Sreekumar has extensive experience in civil, mechanical, electrical, and communication drafting and holds certificates in AutoCAD, MicroStation, and as a civil draftsman from training programs in India. He provides references from previous employers and managers to attest to his drafting skills and
The document discusses the manufacturing process planning for a crankshaft using CAM software. It describes creating a 3D CAD model of the crankshaft from 2D drawings, including steps like sketching, revolving, extruding, and using instance geometry. It then covers the CAM process, including selecting a 5-axis DMG milling machine, choosing tools, and generating tool paths to manufacture the crankshaft. The document emphasizes how CAD/CAM allows integrating design and manufacturing to efficiently produce complex components like crankshafts.
Dynamic CAD Centre is a leading training and engineering solutions provider located in Chennai, India. It has over 8 years of experience in project handling, training, and customer support. It offers CAD/CAE training, professional services, and power user courses to help clients improve productivity and reduce costs and time to market for new products. Dynamic CAD Centre has various divisions that provide industrial solutions, corporate training, and customer support to help clients succeed.
Brendan is a mechanical engineer with experience in the automotive industry, having worked at Bosch for over 3 years developing software simulation tools. He has skills in MATLAB, Simulink, vehicle dynamics, mechanical design, software, electronics systems and programming languages like C and Visual Basic. Brendan is looking to specialize in one field and make a meaningful contribution.
This document summarizes the work history and qualifications of Rajesh Nair:
- Rajesh Nair worked as an Assistant Manager at L&T Technology Services Ltd. from 2007-2016 where he gained experience in technical publication, aerospace CAD design, and business development.
- He has nearly a decade of experience in roles such as technical writing, illustration, engineering design, and presales/business development. Some of the projects and clients he worked with are also listed.
- Rajesh Nair holds a B.Tech in Aeronautical Engineering and has received awards for his work performance and execution of projects. He is proficient in English and several other languages.
Ranjeev Kumar Chaudhary is a mechanical engineer seeking a position applying his expertise in manufacturing, assembly, and repair process planning utilizing ERP technology like SAP. He has over 20 years of experience developing process plans and blueprints to improve operations. Notable achievements include developing custom reports for a major aerospace company, building engineering teams, and initiating projects worth $5.5 million.
Mark Smith has over 30 years of experience in mechanical engineering and software applications. He has expertise in Teamcenter, NX, and SolidWorks applications. Most recently, he has worked as an independent consultant providing implementation, configuration, and support services for various PLM software customers. He has extensive experience in applications engineering, implementation, training, and solution architecture roles.
Ranjeev Kumar Chaudhary is seeking a position as a manufacturing engineering team lead with over 18 years of experience in process planning. He has expertise in SAP production planning, demand management, and cost estimation tools. He holds a Bachelor of Technology degree in Mechanical Engineering from IIT Madras and has experience leading global teams of over 25 people. Currently he provides onsite support for assembly process planning of aircraft components at Triumph Vought in Dallas.
Highly qualified MES Systems Engineer/Business Analyst with 18 years of BT/IT experience in implementing and supporting Manufacturing Execution Systems in the Bio-pharmaceutical industry. I have an aptitude for creating technical solutions by building excellent client relationships and using my strong technical and problem solving skills to effectively understand and meet the client’s requirements
Suresh is seeking a challenging position utilizing his 3 years of experience as a Design Engineer and CAD knowledge in CATIA V5. He has experience in 3D modeling, assemblies, drawings, and converting models between parametric and non-parametric. Some of his projects involved designing components for submarines, marine equipment, and sheet metal parts. Suresh is proficient in CATIA V5 and has experience with surface modeling, top-down assemblies, and drafting. He holds a Bachelor's degree in Mechanical Engineering.
This document provides a summary of a product engineer with over 8 years of experience in automotive seating and interior components design. Key responsibilities include mechanical design, project management, tolerance analysis, and supporting products from concept to mass production. Strengths include CAD skills in CATIA V5 and experience in various technical areas such as sheet metal processing, tolerance stackup analysis, and regulatory compliance.
This document provides an introduction to CAD/CAM/CAE. It begins by defining each term: CAD assists in computer-aided design, CAM plans and controls manufacturing through computer interfaces, and CAE applies computer analysis to engineering components. It then discusses how 3D CAD data can be read by CAM software to generate tool paths for CNC machining. The document also defines computer-integrated manufacturing (CIM) as the total integration of CAD/CAM and business operations using computer systems. It provides an overview of how CAD, CAM, and CAE are applied within the overall product design and manufacturing cycle.
The document outlines a roadmapping case study for a chief technical officer. It provides context for developing four strategic maps to gain a sustainable competitive advantage over the next 5 years: 1) a customer product profile map from 2008-2013, 2) a product roadmap from 2008-2013, 3) a core and enabling technology map from 2008-2013, and 4) a competitive sourcing map from 2008-2013. Examples and evaluation criteria are provided for each map.
The document discusses various stages of a construction project according to the RIBA Plan of Work. In round 1, early stage work like feasibility studies and budget estimation is discussed. Round 2 covers design development using BIM software. Manual measurement and its pros and cons are covered in round 3. Rounds 4 and 5 discuss the construction and close out stages involving tasks like contract management and final accounting. Efficient data management and easier operation and maintenance are benefits mentioned for the close out stage.
Creo packaging and solution capabilities presentation (1) za sajta creo_desig...Victor Mitov
This document summarizes Creo Parametric capabilities for augmented reality, multi-CAD collaboration, importing and repairing data, 2D documentation, 3D annotations, part and assembly modeling, weld design, freeform surfaces, sheetmetal design, plastic part design, design reuse, and assembly management. It describes who needs each capability and the business value, process improvements, and technologies provided.
Christi Farris is a mechanical design drafter seeking opportunities in drafting and designing mechanical devices. She has over 14 years of experience as a mechanical design drafter and design engineer at Fender Musical Instruments Corporation, where she collaborated with engineering and marketing teams to design guitar and amplifier parts from inception to completion. Farris is skilled in 3D modeling, 2D drawings, project management, prototyping, and mechanical drafting, including GD&T standards. She has an Associate of Applied Science degree in Mechanical Drafting from Front Range Community College.
This document contains the resume of Sandeep CS, an engineering professional with over 9 years of experience in product design and development, project management, and team leadership. He has worked for companies like TVS Motor Company, Bosch Ltd, and Nebulatechologies. Currently he is seeking senior level positions involving design, development, product management, or team leadership.
DSM Soft is a leading global engineering services provider founded in 1991 with over 600 employees. It provides services in engineering, geospatial, and publishing domains for private and public sector clients. DSM has production centers in India and an office in the UK, and delivers high-quality services on time and on budget through a team of specialists and best practices.
The document provides information about the ME6501 Computer Aided Design course at AL Ameen Engineering College. It includes 5 units that cover fundamentals of computer graphics, geometric modeling, visual realism, assembly of parts, and CAD standards. The objectives are to provide an overview of how computers are used in mechanical component design. Some key topics covered are product life cycles, sequential and concurrent engineering, CAD system architecture, and representations of curves and surfaces for geometric modeling. The outcomes are for students to be able to use computer and CAD software for modeling mechanical components.
Prabhat Kishore Sharma is an automobile/mechanical design professional with over 4 years of experience in design techniques, tools, and principles. He is currently a Senior Engineer (Design) at ROOP Automotives Ltd., where he is responsible for designing steering components. He has extensive experience in CAD tools like AutoCAD, SolidWorks, Pro-E, and Catia. Previously he worked as a Design Engineer at TRATEC ENGINEERS PVT LTD, where he was involved in trailer and chassis design. He holds an M.Tech in Machine Design and a B.Tech in Automobile Engineering.
Crystal Tyson has over 10 years of experience as an executive assistant and operations manager. She has strong organizational, communication, and problem-solving skills. Her experience includes roles at the National Association of Free & Charitable Clinics, Cigna HealthSpring, and several medical offices. She maintains calendars, arranges travel, takes meeting notes, and ensures smooth daily operations.
The candidate has over 15 years of experience in graphic design and art direction. They currently serve as the Art Director for the Christian Broadcasting Network, where they design projects to maintain branding and industry standards while managing teams. Previously, the candidate worked as an Imaging Technician for The Daily Press and as a Graphic Artist for The Progress-Index, where they designed advertisements and oversaw pre-press operations. The candidate has expertise in Adobe Creative Cloud applications and print/digital design skills. They have a Bachelor's degree in Fine Arts from Virginia Commonwealth University.
The document discusses the manufacturing process planning for a crankshaft using CAM software. It describes creating a 3D CAD model of the crankshaft from 2D drawings, including steps like sketching, revolving, extruding, and using instance geometry. It then covers the CAM process, including selecting a 5-axis DMG milling machine, choosing tools, and generating tool paths to manufacture the crankshaft. The document emphasizes how CAD/CAM allows integrating design and manufacturing to efficiently produce complex components like crankshafts.
Dynamic CAD Centre is a leading training and engineering solutions provider located in Chennai, India. It has over 8 years of experience in project handling, training, and customer support. It offers CAD/CAE training, professional services, and power user courses to help clients improve productivity and reduce costs and time to market for new products. Dynamic CAD Centre has various divisions that provide industrial solutions, corporate training, and customer support to help clients succeed.
Brendan is a mechanical engineer with experience in the automotive industry, having worked at Bosch for over 3 years developing software simulation tools. He has skills in MATLAB, Simulink, vehicle dynamics, mechanical design, software, electronics systems and programming languages like C and Visual Basic. Brendan is looking to specialize in one field and make a meaningful contribution.
This document summarizes the work history and qualifications of Rajesh Nair:
- Rajesh Nair worked as an Assistant Manager at L&T Technology Services Ltd. from 2007-2016 where he gained experience in technical publication, aerospace CAD design, and business development.
- He has nearly a decade of experience in roles such as technical writing, illustration, engineering design, and presales/business development. Some of the projects and clients he worked with are also listed.
- Rajesh Nair holds a B.Tech in Aeronautical Engineering and has received awards for his work performance and execution of projects. He is proficient in English and several other languages.
Ranjeev Kumar Chaudhary is a mechanical engineer seeking a position applying his expertise in manufacturing, assembly, and repair process planning utilizing ERP technology like SAP. He has over 20 years of experience developing process plans and blueprints to improve operations. Notable achievements include developing custom reports for a major aerospace company, building engineering teams, and initiating projects worth $5.5 million.
Mark Smith has over 30 years of experience in mechanical engineering and software applications. He has expertise in Teamcenter, NX, and SolidWorks applications. Most recently, he has worked as an independent consultant providing implementation, configuration, and support services for various PLM software customers. He has extensive experience in applications engineering, implementation, training, and solution architecture roles.
Ranjeev Kumar Chaudhary is seeking a position as a manufacturing engineering team lead with over 18 years of experience in process planning. He has expertise in SAP production planning, demand management, and cost estimation tools. He holds a Bachelor of Technology degree in Mechanical Engineering from IIT Madras and has experience leading global teams of over 25 people. Currently he provides onsite support for assembly process planning of aircraft components at Triumph Vought in Dallas.
Highly qualified MES Systems Engineer/Business Analyst with 18 years of BT/IT experience in implementing and supporting Manufacturing Execution Systems in the Bio-pharmaceutical industry. I have an aptitude for creating technical solutions by building excellent client relationships and using my strong technical and problem solving skills to effectively understand and meet the client’s requirements
Suresh is seeking a challenging position utilizing his 3 years of experience as a Design Engineer and CAD knowledge in CATIA V5. He has experience in 3D modeling, assemblies, drawings, and converting models between parametric and non-parametric. Some of his projects involved designing components for submarines, marine equipment, and sheet metal parts. Suresh is proficient in CATIA V5 and has experience with surface modeling, top-down assemblies, and drafting. He holds a Bachelor's degree in Mechanical Engineering.
This document provides a summary of a product engineer with over 8 years of experience in automotive seating and interior components design. Key responsibilities include mechanical design, project management, tolerance analysis, and supporting products from concept to mass production. Strengths include CAD skills in CATIA V5 and experience in various technical areas such as sheet metal processing, tolerance stackup analysis, and regulatory compliance.
This document provides an introduction to CAD/CAM/CAE. It begins by defining each term: CAD assists in computer-aided design, CAM plans and controls manufacturing through computer interfaces, and CAE applies computer analysis to engineering components. It then discusses how 3D CAD data can be read by CAM software to generate tool paths for CNC machining. The document also defines computer-integrated manufacturing (CIM) as the total integration of CAD/CAM and business operations using computer systems. It provides an overview of how CAD, CAM, and CAE are applied within the overall product design and manufacturing cycle.
The document outlines a roadmapping case study for a chief technical officer. It provides context for developing four strategic maps to gain a sustainable competitive advantage over the next 5 years: 1) a customer product profile map from 2008-2013, 2) a product roadmap from 2008-2013, 3) a core and enabling technology map from 2008-2013, and 4) a competitive sourcing map from 2008-2013. Examples and evaluation criteria are provided for each map.
The document discusses various stages of a construction project according to the RIBA Plan of Work. In round 1, early stage work like feasibility studies and budget estimation is discussed. Round 2 covers design development using BIM software. Manual measurement and its pros and cons are covered in round 3. Rounds 4 and 5 discuss the construction and close out stages involving tasks like contract management and final accounting. Efficient data management and easier operation and maintenance are benefits mentioned for the close out stage.
Creo packaging and solution capabilities presentation (1) za sajta creo_desig...Victor Mitov
This document summarizes Creo Parametric capabilities for augmented reality, multi-CAD collaboration, importing and repairing data, 2D documentation, 3D annotations, part and assembly modeling, weld design, freeform surfaces, sheetmetal design, plastic part design, design reuse, and assembly management. It describes who needs each capability and the business value, process improvements, and technologies provided.
Christi Farris is a mechanical design drafter seeking opportunities in drafting and designing mechanical devices. She has over 14 years of experience as a mechanical design drafter and design engineer at Fender Musical Instruments Corporation, where she collaborated with engineering and marketing teams to design guitar and amplifier parts from inception to completion. Farris is skilled in 3D modeling, 2D drawings, project management, prototyping, and mechanical drafting, including GD&T standards. She has an Associate of Applied Science degree in Mechanical Drafting from Front Range Community College.
This document contains the resume of Sandeep CS, an engineering professional with over 9 years of experience in product design and development, project management, and team leadership. He has worked for companies like TVS Motor Company, Bosch Ltd, and Nebulatechologies. Currently he is seeking senior level positions involving design, development, product management, or team leadership.
DSM Soft is a leading global engineering services provider founded in 1991 with over 600 employees. It provides services in engineering, geospatial, and publishing domains for private and public sector clients. DSM has production centers in India and an office in the UK, and delivers high-quality services on time and on budget through a team of specialists and best practices.
The document provides information about the ME6501 Computer Aided Design course at AL Ameen Engineering College. It includes 5 units that cover fundamentals of computer graphics, geometric modeling, visual realism, assembly of parts, and CAD standards. The objectives are to provide an overview of how computers are used in mechanical component design. Some key topics covered are product life cycles, sequential and concurrent engineering, CAD system architecture, and representations of curves and surfaces for geometric modeling. The outcomes are for students to be able to use computer and CAD software for modeling mechanical components.
Prabhat Kishore Sharma is an automobile/mechanical design professional with over 4 years of experience in design techniques, tools, and principles. He is currently a Senior Engineer (Design) at ROOP Automotives Ltd., where he is responsible for designing steering components. He has extensive experience in CAD tools like AutoCAD, SolidWorks, Pro-E, and Catia. Previously he worked as a Design Engineer at TRATEC ENGINEERS PVT LTD, where he was involved in trailer and chassis design. He holds an M.Tech in Machine Design and a B.Tech in Automobile Engineering.
Crystal Tyson has over 10 years of experience as an executive assistant and operations manager. She has strong organizational, communication, and problem-solving skills. Her experience includes roles at the National Association of Free & Charitable Clinics, Cigna HealthSpring, and several medical offices. She maintains calendars, arranges travel, takes meeting notes, and ensures smooth daily operations.
The candidate has over 15 years of experience in graphic design and art direction. They currently serve as the Art Director for the Christian Broadcasting Network, where they design projects to maintain branding and industry standards while managing teams. Previously, the candidate worked as an Imaging Technician for The Daily Press and as a Graphic Artist for The Progress-Index, where they designed advertisements and oversaw pre-press operations. The candidate has expertise in Adobe Creative Cloud applications and print/digital design skills. They have a Bachelor's degree in Fine Arts from Virginia Commonwealth University.
This document provides a summary of Celys Irizarry Sepúlveda's education, experience, skills, and references. She holds a Master's degree in Environmental and Water Resources Engineering from the University of Puerto Rico, Mayagüez and a Bachelor's degree in Civil Engineering with a minor in Environmental Engineering. Her experience includes work as a field technician, research technician, volunteer, and laboratory instructor. She has skills in GIS, hydrology, water quality testing, and data analysis software. References are available upon request.
Chad Hall has over 15 years of experience in turfgrass management and agriculture. He is currently a Project Manager at Bass Rocks Golf Club in Gloucester, MA, where his responsibilities include managing an 18-person maintenance staff, assisting with the $750K operating budget and $115K annual purchasing packages, and coordinating multiple capital improvement projects at the golf course. Previously, he was Assistant Superintendent at Boca Grove Plantation in Boca Raton, FL, where he helped renovate greens and collars and managed hurricane recovery efforts. He holds an Associate's degree in Turfgrass Management and a Bachelor's degree in Plant and Soil Sciences.
Chad Odom is a disciplined leader with experience marketing for a law firm, managing teams in the Army and Air Force, and securing sensitive items. He increased a law firm's customer base by 15% and social media followers by 103% as Marketing Director. As a Sergeant, he oversaw a team of 12 and equipment worth $4 million daily. He holds an MBA with a marketing emphasis and technical skills including Google Analytics and AdWords.
The new T5 DALI lighting system at the KBIGH sports complex has been operating successfully for over a year. The management staff commented that the new lighting system offers several advantages, including adjustable lighting levels for each badminton court, more comfortable lighting, and significant savings on electricity costs. The document is Sathish G's resume, which details his personal information, educational qualifications including a B.E. in electronic communication engineering, areas of interest in hardware, networking and CCNA certification, software skills in programming languages and web technologies, and strengths in being achievement oriented with good communication skills.
This resume is for Yogendrakumar Patel, who has a Bachelor's degree in Computer Engineering from Gujarat Technological University. He has consistently good academic scores throughout his education. His objective is to work for a growth-oriented organization where he can enhance his skills and contribute to the company's growth. He has technical skills in programming languages like C/C++ and databases like Oracle and SQL. His areas of interest include project management, web design, software development and hardware/networking.
Cathy Bolesta seeks a challenging position in a sleep diagnostic and treatment environment utilizing over 20 years of technical and supervisory experience. She is a registered polysomnographic technologist with credentials in CPR and EEG certification. Her experience includes administering sleep testing protocols, expanding and renovating an accredited sleep center from 4 to 8 beds, recruiting and supervising staff, and achieving and maintaining accreditation status. She has experience preparing budgets, reports, and presenting at regional forums.
The document summarizes the responsibilities of a production planner/document control position responsible for manufacturing planning, processing flight hardware for multiple space station projects, acting as a liaison between customers and manufacturing departments, and providing weekly status reports. Key responsibilities included reviewing customer orders, generating work orders, procuring parts and materials, accounting functions, document control, inventory management, and administrative support.
Carlos Durkin has over 20 years of experience in graphic design, branding, and marketing. He has held positions at various companies developing branding strategies, user interfaces, trade show materials, and more. His experience ranges from art directing at a college to co-founding his own creative agency. He holds a Bachelor of Arts in Communication Design from Occidental College.
Cynthia Dix has over 20 years of experience in accounting roles with increasing responsibility. She has extensive experience in accounts payable and receivable, including processing invoices, maintaining vendor and customer databases, resolving billing issues, and ensuring accurate financial reporting. Her resume highlights her strong skills in accounting systems, contract management, and customer service.
Corey Carpenter is a consultant with over 5 years of experience in SAP modules including Materials Management, Warehouse Management, Plant Maintenance, and SRM-Procurement. She has a proven track record of delivering quality work through analysis, metrics, process documentation, and testing. Her latest project involved business process modeling for Boeing Airlines' procurement processes.
Catherine Mueller has experience in public health volunteering in Guinea, West Africa from 2013-2014 where she participated in training and helped create an artists association. She also coordinated a malaria prevention campaign. In the US, she was a division leader at a summer camp in 2013 and planned community service events as an assistant at Cal State LA from 2012-2013. She has 5 years of customer service experience from working at Starbucks. Catherine has a BA in Communications from Cal State LA and is proficient in English, French, and Puular.
The document is a resume for Gerald L. Cepil applying for a challenging management position in distribution and production. It summarizes his experience supervising shipping, receiving, and material handling departments across several distribution center roles over 15 years. His qualifications include effective project coordination, team supervision, scheduling, budget controls, and developing people to achieve results.
Sasi Kumar has over 13 years of experience in 3D modeling, drafting, detailing, and technical documentation for automobiles, trucks, and engines. He is an expert in AutoCAD, Pro/E, and has extensive experience in design, illustration, and authoring tools. Currently he works as a Senior Specialist at Ford Technology Service India where he creates technical illustrations and documentation for global markets. Previously he has worked on parts cataloging and illustration projects for Renault Nissan and Navistar. He is proficient in modeling, planning, implementing designs, and creating parts catalogs and manuals.
Andrew Levine has over 30 years of experience in manufacturing engineering, quality control, and project management. He specializes in lean manufacturing techniques and has a green belt in Six Sigma. His objective is to transfer his quality system and process improvement expertise to a senior manufacturing or quality engineering role.
This is my latest updated Resume. I am actively searching for new Job role as a Design Engineer. I am currently working with Anant Industries as a Jr. Design Engineer, working on projects for Indian Defense. 8 have good hands on experience with Solidworks, CATIA, UGNX, AutoCAD etc.
This summary outlines the experience of F. Wayne Atkinson as a successful program/project manager with over 15 years of experience managing complex projects in the automotive industry. He has a passion for new technology and problem solving. His technical skills include expertise with Microsoft software, computer hardware, network design, and printed circuit board design. He has worked as a project manager, systems analyst, data analyst, website designer, and desktop administrator at BMW Manufacturing in Greer, SC.
This document contains a summary of Priyanka Shrivastava's resume. She has over 5 years of experience in aerospace engineering roles. She currently works as a Technical Production Engineer for Quest Global in Bangalore, India supporting Rolls-Royce. Her responsibilities include developing bills of materials, managing engineering change orders, and mentoring teammates. She has expertise in product development processes, CAD tools, and systems used by Rolls-Royce like PCOMM.
The applicant is applying for a CNC programming engineer position with over 16 years of experience in manufacturing. He currently works as a CNC program engineer developing CAD models, CNC programs, and tooling for machining aerospace materials. Previously he has held roles with several employers in Singapore and India, programming for milling, turning, and EDM machines. He has a diploma in plastics mould technology and is proficient in various CAD/CAM software.
This document contains the resume of Sandeep CS, an engineering professional with over 9 years of experience in product design and development, project management, and team leadership. He has worked for companies like TVS Motor Company, Bosch Ltd, and Nebulatechologies. Currently he is seeking senior level positions involving design, development, product management, or team leadership.
David Molloy has over 30 years of experience in proposal engineering, estimating, and tool design. He currently works as a proposal engineer at Comau, where he has held several roles including proposal lead, ITAR security officer, and proposal manager. Prior to his current role, Molloy worked as a designer, layout engineer, and detailer at several engineering firms supporting the automotive industry. He has a background in tool design, CAD operation, and process development. Molloy continues his education at Lawrence Technological University pursuing a BSME degree.
Shishirchandu has over 12 years of experience in manufacturing engineering, product design, and quality engineering for aerospace, automotive, and industrial products. He has worked for Rolls Royce in Derby, UK and in India through Quest Global, supporting manufacturing processes and reducing non-conformances for various engine programs. Currently, he works as a lead engineer for Quest Global in India on manufacturing process planning and inspection planning for Rolls Royce aircraft engine components.
Hafiz Muhammad Umar Akbar has over 11 years of experience as a Production Manager and CNC Department In-charge. He has a BS in Mechanical Engineering and professional diplomas in engineering drafting, machine shop technology, CNC milling, and AutoCAD. Currently he works as the Production Manager at Eehab Engineering Company, where he supervises production processes, maintains inventory, and ensures production goals are met. He has strong skills in AutoCAD, Pro Engineering, Delcam, and CNC programming and machining.
Ayyapp Dasam 3.6 Years Exp in OracleAppsAyyappa Dasam
Ayyappa Dasam is an Oracle Apps R12 Techno-Functional Consultant with over 3 years of experience implementing Oracle E-Business Suite R12 projects for clients like GE Capital and Cheniere Energy. He has extensive experience in modules like GL, AR, CM, PA, OTL and HRMS, and has skills in requirement gathering, designing technical specifications, application setup, interface development, and data conversion. He is proficient in SQL, PL/SQL, XML, and has worked on multiple live R12 upgrade and implementation projects.
Banesh has over 14 years of experience in fields like construction, CAD design, manufacturing R&D, and facilities management. He has worked at Dell for over 10 years, where he currently serves as a Project Program Management Advisor. At Dell, he has led several global projects involving facilities tools, processes, and data integration. Banesh holds a Bachelor's degree in Business Administration and a diploma in Mechanical Engineering.
Examination into it & competitive strategies within constructionsai0513
The document discusses information technology and competitive strategies in construction industry. It explains that IT and new technologies can provide competitive advantage through cost leadership, differentiation, innovation and operational effectiveness strategies. It also discusses various design and engineering software like AutoCAD, Revit, STAAD Pro, SAP2000, Microsoft Project, Primavera and Prism used in construction industry. Finally, it talks about the need for building information modeling (BIM) and modern construction methods like offsite construction to improve quality, efficiency and skills in the industry.
Refayet Amin has over 23 years of experience in technical and managerial fields including engineering, manufacturing, sales, and business development. He has expertise in multi-disciplinary engineering areas and experience managing engineering teams, budgets, and manufacturing operations. His career includes positions as General Manager, Vice President, and Project Engineer where he oversaw projects from concept to production.
This document summarizes the experience and skills of an individual with over 8 years of experience in design and product development for the aerospace and automotive industries. They have expertise in CATIA V5 modeling and have worked on projects involving design, manufacturing, assembly design, and reverse engineering for clients such as Ashok Leyland and PSB Pune. Their experience includes design of components for aircraft engines, vehicle chassis, and automotive seating and airbag subassemblies.
Kuo, Sheng-Hui is a program consultant and project manager with over 15 years of experience leading technology projects across various industries. She has expertise in project management methodologies including Agile and waterfall. Kuo holds an MBA and multiple technical certifications including PMP, Six Sigma Black Belt, and experience with systems like SAP, Oracle PLM, and Agile PLM. She seeks a position where she can apply her experience managing multimillion dollar projects to drive business goals and technology solutions.
R. Anilkumar is a mechanical engineer with 3 years of experience in designing aircraft components. He has expertise in CAD software such as NX, Solidworks, Pro/Engineer, and Inventor. He is seeking a position that allows him to utilize his design and technical skills while contributing to organizational growth. His experience includes designing mechanical parts and assemblies, plastic/sheet metal parts, programming CNC machines, and troubleshooting technical problems for clients. He has a Bachelor's degree in Mechanical Engineering and is proficient in both English and Hindi.
Alicia Scott CV Business Analyst Nov 2016Alicia Scott
Alicia Scott has over 20 years of experience as a business analyst and project manager in the insurance industry. She holds an MSc in Computer Science and is currently studying for an MSc in Web Science and Big Data. Her experience includes managing requirements, performing data analysis, and implementing reporting solutions for various insurance companies. Currently she is a business analyst at Direct Line Group developing a data warehouse and reports.
1. SAP Data Coordinator| Chris Gartner
Chris Gartner
Contact
Email:
cgartner@adam.com.au
Mail:
5 Templar Crescent Pooraka 5095
Phone:
0438 275 320
Experience
2010 to current Mitsubishi Motors Australia Ltd.
SAP Subject Matter Expert/SAP Data Coordinator
Nature of business:
Supply of replacement parts
and Accessories to the
MMAL dealers and
customers. To support
Customer Service for the
Mitsubishi products
Duties and Responsibilities:
As the Subject Matter Expert for P&A’s Part Master data, I was responsible for the
documentation of business processes and system requirements, including any
interdependencies across functional areas. I was responsible to assist in the design
of the various Business process, screens, reports, forms, interfaces and data
conversions for MMAL’s “Parts & Accessories" database/system.
Post launch of the SAP ERP system for Mitsubishi, I was responsible for
maintaining the integrity of the Master data. This includes creating queries and
reports to identify any issues from user and automated process.
Major Achievements:
(2013-) Create SAP user Documentation, Processes and procedures. Create
reports to interrogate the integrity of the SAP Master data.
(2010-2012) SAP Subject Matter Expert responsible for the development and
conversions of the P&A Part Master data and Parts Catalogue/Bill of Materials.
The conversion of the data amounted to over 20 million records that had to be
extracted from the legacy system and loaded into SAP ECC.
The whole process was documented and audited to ensure that the data
integrity for MMAL’s business was maintained.
2005 to 2010 Mitsubishi Motors Australia Ltd.
Project Coordinator
Nature of business:
Supply of replacement parts
and Accessories to the
MMAL dealers and
customers. To support
Duties and Responsibilities:
Prepare Project plans for the supply of Accessories and Service parts for new
model launches.
Coordinate the activities of MMAL departments and External resources to
meet that planning.
Confidential Page 1 of 4 23/02/2015
Relevant Skills
Data Management Managing the Service and Accessory parts database and the electronic parts
catalogue systems for Mitsubishi Motors Australia Ltd. (17+ years).
Project Management Project planning/Coordination.
Supervisor & Managerial Administration Supervisor, Managing a Small Business
Computing Skills Proficient in SAP ECC
Proficient to an advanced level for Microsoft Office products, Word, Excel,
Power Point, Project, Visio,
Competent in ENICS, Lotus Notes, Mainframe and basic QMF
Computer Graphics programs :PageMaker, CorelDraw, PhotoPaint, Freehand,
Xara, Photoshop, Bryce, Poser, Cararra
Technical Illustration Computer illustrations, Isometric, Perspective, Line & colour work, Airbrush (20
years experience)
Graphic art All facets of artwork from creating to prepress (15 years experience)
2. SAP Data Coordinator| Chris Gartner
Customer Service for the
Mitsubishi products
Prepare reports for the P&A Management to support the P&A KPI’s.
Manage the rollout of projects to the dealerships including training, etc
Major Achievements:
(2009-10) Coordinate the Business/Specification processes of the “Mitsubishi
Capped Price Servicing” project.
(2007-08) Develop a unique MMAL Accessory & POE solution as a module of
the ASA(CAPS) Electronic Parts Catalogue .
(2005-07) Coordinating the integration of MMAL’s parts catalogue system into
MMC’s global EPC (ASA-CAPS) and launching the new EPC to the MMAL
dealers.
1997 - 2004 Mitsubishi Motors Australia Ltd
Supervisor - Technical Publications
Nature of business:
Management of Service
parts and Parts catalogue
detailing MMAL range of
service parts for
Mitsubishi’s customers.
Duties and Responsibilities:
Supervise the MMAL Technical department to produce Parts catalogues in a
timely manner for both Domestic and the Export markets. .,
Liaise with other departments both within MMAL and MMC for the exchange
of engineering and parts data.
Check and approve the Engineering Orders and Drawings to manage the
MMAL Service parts in ENICS.
Review systems and procedures to implement improvements.
Respond to Technical inquires from MMAL’s customers.
Major Achievements:
I played a key role in the development of the Mitsubishi Partfinder EPC
(Electronic Parts Catalogue from Infomedia), including directing the
development of the MMAL parts database.
I liaised with the vendor(Datateck/Infomedia) to create a unique EPC to suit
the needs of Mitsubishi Motors Australia Ltd.
Develop cataloguing procedures and documents to ISO 9002 standards.
1993 - 1999 Chris Gartner Illustrations
Technical & Graphic Artist
Nature of business:
Owner of small business
delivering Graphic and
Technical Illustrations.
Duties and Responsibilities:
Prepare, quote and create artwork for printing according to clients brief.
Manage all facets of a small business, including accounting, invoicing, timing
and coordination with client and printers
(Closed business down due to other commitments)
1989 - 1997 Mitsubishi Motors Australia Ltd
Technical Illustrator
Nature of business:
Create Parts catalogue
detailing MMAL range of
service parts for Mitsubishi
Dealers.
Duties and Responsibilities:
Produce accurate Technical illustrations for parts catalogues.
Develop PC based parts catalogue in PageMaker for US and Europe export
markets.
Other duties: Graphic artwork for advertising mock-ups and Management
presentations.
1988 – 1989 Raspberry Studios
Architectural Model Maker
Nature of business:
Produce detailed
architectural models for
client appraisal of major
projects.
Duties and Responsibilities:
Manager and Senior Model maker. I would supervise and coordinate the
production team (2-4 members).
Create accurate and realistic architectural models from design or concept
drawings.
Consult with client to prepare project brief.
Monitor production to meet deadlines for completion, expenditure and avoid
contractual penalties.
Confidential Page 2 of 4 23/02/2015
3. SAP Data Coordinator| Chris Gartner
1984 – 1988 Brian Smyth & Associates
Industrial Designer Consultant
Nature of business:
Industrial Design consultants
to develop customer’s
concept to commercial
feasibility
Duties and Responsibilities:
Technical Illustrator; Industrial designer; Conceptual artist.
Other duties: Model maker, Prototype design and construction, Design &
Detail draftsman, Graphic artist
1982 - 1984 ROYAL AUSTRALIAN AIR FORCE
Aircraft Research & Development Unit (ARDU)
Detail Engineering Draftsman
Nature of business:
Aircraft Research and
Development Unit (ARDU)
was responsible for the test
and evaluation of aircraft and
weapons used by the RAAF
Duties and Responsibilities:
Create the Engineering Drawings to document modifications to Aircraft and
associated systems to Australian, International and Military standards.
Document test support systems and instrumentation.
Other duties: Produce supporting technical illustrations for official
Report/Publications and for Presentation material
Major Achievements:
Introduce a new Engineering drawing standard to the RAAF based on the
General Dynamics standards.
1979 - 1981 ROYAL AUSTRALIAN AIR FORCE
Aircraft Research & Development Unit (ARDU)
Aircraft Engine Fitter
Nature of business:
Aircraft Research and
Development Unit (ARDU)
was responsible for the test
and evaluation of aircraft and
weapons used by the RAAF
Duties and Responsibilities:
Maintain the engine and related systems of the ARDU fleet of aircraft.
Fit and maintain modified parts, Instrumentation, etc to aircraft engines and
related systems.
Major Achievements:
Finished Dux of Aircraft Engine Fitter (R.AAF course no. 26)
1978 - 1978 Motor Market Pty Ltd
Mechanic/Detailer
Nature of business:
Automotive car sales
Duties and Responsibilities:
Mechanical repairs and vehicle detailing.
1976 - 1977 V.S. Customising Sales
Motor Mechanic (Apprentice)
Nature of business:
Automotive car sales
Duties and Responsibilities:
Motor Mechanic (apprenticeship).
Other duties: Assisting with automotive crash repair.
1976 - 1976 Australian Surfacing Contractors
Assembly Worker
Nature of business:
Producing Building panels
and Air conditioning ducts
Duties and Responsibilities:
Fabricating Air conditioning ducting and general factory work.
1974 - 1976 A1 Anco Engineering
Production Machinist
Nature of business:
General Engineering
producing Automotive and
Industrial components.
Duties and Responsibilities:
Setting up and operating of various machinery, ie. Lathes, Drill Press, Milling
machines etc.
Other duties: Assembly Worker and Delivery Driver
Confidential Page 3 of 4 23/02/2015
4. SAP Data Coordinator| Chris Gartner
Education
Education (Secondary)
Strathmont Boys Technical High School.
1973 Public Examination Leaving Certificate
Education (post Secondary)
2009 Excel Advanced
2004 Internal QMS Auditor training (ISO 9001:2000)
1997 & 1999 Frontline Leadership for Managers (MMAL Marketing Institute)
1993 Design for Desktop Publishing Workshop (Ferntree Computer Systems)
1993 Small Business & Management course (W.E.A. - Adelaide University)
1992 DOS Introduction course (Mitsubishi Info Systems)
1992 Pagemaker course (Ferntree Computer Systems)
1983-85 Certificate of Commercial Arts TAFE - Croydon
1983 Successfully completed Engineering Draftsman Exams for RAAF
1982 N.C. Mill Programming & Operating Course (William Adams Engineering)
1981 Certificate of Custom Painting (National School of Custom Painting)
1981 Training on Mirage III Atar Engine (RAAF course no 125)
1979-80 Aircraft Engine Fitter (R.AAF course no. 26)
1978-79 Recruit training course (RAAF course no. 1470)
1976-77 Automotive Mechanic (Apprenticeship) TAFE – Croydon
1975-76 Automotive Mechanic (Adult Education) TAFE - Croydon
1974-75 Fitting and Turning (Adult Education) TAFE – Panorama
Certificates, Awards
2010 Certificate IV Frontline Leadership
1997&1999 Frontline Leadership for Managers.
1984 Certificate of Service Royal Australian Air Force
1982 N.C. Mill Programming & Operating Course
1982 Programming & Operating Course certificate
1981 Certificate of Guard of Honour for H.R.M. Queen Elizabeth II
1981 Certificate of Custom Painting (National School of Custom Painting)
1981 Certificate of training on Mirage III Atar Engine
1980 Aircraft Engine Fitter with a Distinction assessment
1979 Recruit training course
Confidential Page 4 of 4 23/02/2015