"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
In the fall of 2002, a revolutionary method by which to inspect mill rolls was introduced to the metal producing industry. This ultrasonic approach was designed to overcome the inadequacies of existing inspection techniques while
maximising return on investment. Since then, a number of improvements have been made, and with input from many
roll shops, the latest technologies provide the most comprehensive tool available for the inspection of all types of mill rolls. This paper provides an overview of mill roll
inspection technology and the effects that various inspection technologies can have on the efficiency and costs associated with operating a roll shop. It will also highlight how new techniques provide alternatives otherwise not available.
Our new edition of the Newsletter "Market Insights by CORIAL" is now available!
Download your copy and read about plasma technology and applications for the Failure Analysis sector
The document discusses optimizing the capacity and surface quality of a pickling line using the Detmaster MPG Pickling Grade Measurement System. In a pickling process, residual scale from hot rolling is removed through chemical reaction in pickling tanks. The system aims to achieve the nominal level of scale removal while maximizing production capacity. It introduces a new highly sensitive technology that can continuously measure residual scale across the entire strip surface with changes below 2% detectable. This provides operators real-time visualization to precisely control line speeds and processing for each steel grade, increasing capacity by an estimated minimum of 5% without other investments.
IRJET- Experimental Investigation of Aluminum 7075 using Dry, Wet and MQL...IRJET Journal
The document experimentally investigates the effect of dry, wet, and minimum quantity lubrication (MQL) conditions on machining aluminum 7075 alloy. Surface roughness and temperature near the cutting zone were analyzed for each condition. MQL machining resulted in lower surface roughness and temperature compared to dry and wet machining. Gray relational analysis determined that for dry machining, a cutting speed of 10000 rpm, feed rate of 600 mm/min, and depth of cut of 0.25 mm provided the best performance across surface roughness and temperature.
Flexim Fluxus Ultrasonic Flow Meters - Flow Measurement In Refineries - Broch...Thorne & Derrick UK
The document discusses non-intrusive ultrasonic flow measurement using FLEXIM's WaveInjector technology. It provides examples of how the WaveInjector has been used to measure flows in refineries under harsh conditions, including temperatures up to 400°C. The WaveInjector allows flow measurement without intruding into pipes and does not require maintenance like conventional intrusive technologies. Its non-intrusive nature provides benefits such as easier installation and maintenance, reduced costs, improved safety, and reliable measurement even at low flows or in dirty environments.
Low pressure Molding could protect LED strip, PCB and magnetic very well. Macromelt & Technomelt as a common molding materials play in an encapsulating and environmentally protection on sensitive electronic components, IC molding sealing, Magnetic over molding and other sensitive components pakage. The main intention is to protect the sensitive electronic components during the molding stress, because high pressure molding would harm the properties of these components. Additionally, low pressure seal molding also protects electronic components against dust, moisture and vibration stress. It is also commonly used for Cable relief and sealing connectors.
Dominique Tharandt is a chemical engineer with over 16 years of experience working on projects in industries such as chemicals, precious metals refining, and mining. She has managed projects from concept through execution and currently works as a Senior Process Engineer at WorleyParsons, where she is responsible for process engineering on feasibility and EPCM projects around the world.
IMPROVEMENT OF PRODUCTIVITY AND QUALITY IN THE WIND ENERGY INDUSTRY THROUGH THE USE OF AN ADVANCED SENSOR SYSTEM , presented at SAMPE-Europe Conference 2017,
Stuttgart, November 15th 2017
In the fall of 2002, a revolutionary method by which to inspect mill rolls was introduced to the metal producing industry. This ultrasonic approach was designed to overcome the inadequacies of existing inspection techniques while
maximising return on investment. Since then, a number of improvements have been made, and with input from many
roll shops, the latest technologies provide the most comprehensive tool available for the inspection of all types of mill rolls. This paper provides an overview of mill roll
inspection technology and the effects that various inspection technologies can have on the efficiency and costs associated with operating a roll shop. It will also highlight how new techniques provide alternatives otherwise not available.
Our new edition of the Newsletter "Market Insights by CORIAL" is now available!
Download your copy and read about plasma technology and applications for the Failure Analysis sector
The document discusses optimizing the capacity and surface quality of a pickling line using the Detmaster MPG Pickling Grade Measurement System. In a pickling process, residual scale from hot rolling is removed through chemical reaction in pickling tanks. The system aims to achieve the nominal level of scale removal while maximizing production capacity. It introduces a new highly sensitive technology that can continuously measure residual scale across the entire strip surface with changes below 2% detectable. This provides operators real-time visualization to precisely control line speeds and processing for each steel grade, increasing capacity by an estimated minimum of 5% without other investments.
IRJET- Experimental Investigation of Aluminum 7075 using Dry, Wet and MQL...IRJET Journal
The document experimentally investigates the effect of dry, wet, and minimum quantity lubrication (MQL) conditions on machining aluminum 7075 alloy. Surface roughness and temperature near the cutting zone were analyzed for each condition. MQL machining resulted in lower surface roughness and temperature compared to dry and wet machining. Gray relational analysis determined that for dry machining, a cutting speed of 10000 rpm, feed rate of 600 mm/min, and depth of cut of 0.25 mm provided the best performance across surface roughness and temperature.
Flexim Fluxus Ultrasonic Flow Meters - Flow Measurement In Refineries - Broch...Thorne & Derrick UK
The document discusses non-intrusive ultrasonic flow measurement using FLEXIM's WaveInjector technology. It provides examples of how the WaveInjector has been used to measure flows in refineries under harsh conditions, including temperatures up to 400°C. The WaveInjector allows flow measurement without intruding into pipes and does not require maintenance like conventional intrusive technologies. Its non-intrusive nature provides benefits such as easier installation and maintenance, reduced costs, improved safety, and reliable measurement even at low flows or in dirty environments.
Low pressure Molding could protect LED strip, PCB and magnetic very well. Macromelt & Technomelt as a common molding materials play in an encapsulating and environmentally protection on sensitive electronic components, IC molding sealing, Magnetic over molding and other sensitive components pakage. The main intention is to protect the sensitive electronic components during the molding stress, because high pressure molding would harm the properties of these components. Additionally, low pressure seal molding also protects electronic components against dust, moisture and vibration stress. It is also commonly used for Cable relief and sealing connectors.
Dominique Tharandt is a chemical engineer with over 16 years of experience working on projects in industries such as chemicals, precious metals refining, and mining. She has managed projects from concept through execution and currently works as a Senior Process Engineer at WorleyParsons, where she is responsible for process engineering on feasibility and EPCM projects around the world.
IMPROVEMENT OF PRODUCTIVITY AND QUALITY IN THE WIND ENERGY INDUSTRY THROUGH THE USE OF AN ADVANCED SENSOR SYSTEM , presented at SAMPE-Europe Conference 2017,
Stuttgart, November 15th 2017
Callum Taylor has over 30 years of experience in oil and gas operations. He is currently a Production Supervisor on the FPSO Aoka Mizu, where he is responsible for safe and efficient production operations and ensuring personnel are properly trained. Prior to his current role, Taylor worked as a Production Operator, Process Operator, and CRO on offshore platforms and onshore terminals. He holds various safety, emergency response, and technical qualifications.
Get Fit For The Future - Dry Ore Comminution TechnologyLOESCHE
Our dry comminution is flexible, sustainable and energy-efficient.
The LOESCHE layout characterizes through a compact design and hence a small plan footprint - ideal from brownfield, but also for greenfield projects.
The document provides details about Hindustan Zinc Limited, located in Udaipur. It discusses the history and background of the company, starting in 1968 as India's first zinc smelter. It then summarizes the key departments and processes at the plant, including roasting, leaching, electrolysis, and zinc dust production. The plant aims to improve productivity, recovery efficiency, and reduce costs through emphasis on energy conservation and process optimization.
Yokogawa provided its CENTUM CS 3000 distributed control system and ProSafe-RS safety instrumented system for the South Hook LNG Terminal in the UK, the largest LNG terminal in Europe. The terminal plays a major role in supplying natural gas to the UK and strengthening the strategic partnership between Qatar and the UK. Yokogawa's solutions help ensure plant safety and reliability through integrated automation and safety systems, effective data management with Exaquantum, and training operators using a simulator to handle abnormal situations safely. The customer is satisfied with Yokogawa's highly reliable systems contributing to the terminal's continuous 24/7/365 operations and supply of up to 20% of UK gas demand.
The document describes the Production4μ project which aims to develop ultra precision production technologies for optics manufacturing. It has a total budget of 15.43 million euros and involves multiple partners across the optics production process chain, from design to assembly. Key aspects covered include the precision glass moulding technology, the full process chain from tool making to glass preform production, and the development of new ultra low transition temperature glass materials suitable for the moulding process.
The document describes the Production4μ project which aims to develop ultra precision production technologies for optics manufacturing. It has a total budget of 15.43 million euros and involves multiple partners across the optics production process chain, from design to assembly. Key aspects covered include the precision glass moulding technology, the full process chain from tool making to glass preform production, and the development of new ultra low transition temperature glass materials suitable for the moulding process.
Liquid silicone rubber (LSR) in combination with other substrates, completed in a combination of injection molding, assembly and other process steps. Trelleborg Sealing Solutions is the world’s leading exponent of precision Liquid Silicone Rubber (LSR) and Two-Component (2C) manufacturing processes and tooling technology.
This document contains a summary of a candidate's qualifications for a Senior Cementing Supervisor position. The candidate has over 10 years of experience in cementing operations for various oilfield services companies in Algeria, Iraq, and the UAE. They have extensive technical knowledge and certifications in cementing equipment, operations, and safety. The candidate also has experience supervising cementing jobs and teams on both land and offshore rigs.
VEGA Pressure & Level Measurement Metal Processing Industry ApplicationsThorne & Derrick UK
VEGA provides measurement solutions for the demanding conditions in the metal processing industry. Their plics modular system allows for individual combinations of sensors, fittings, electronics and housings to meet technical and economic needs. Application examples show how VEGA instruments reliably measure levels, pressures and other process variables in challenging environments like mining, steel production, and smelting under high temperatures, dust, noise and abrasive conditions.
Productivity improvement of castings, switching to shell mould process from g...eSAT Publishing House
This document summarizes a study comparing the green sand mould casting process to the shell mould casting process. Some key findings include:
- Yield increased from 65% to 78% by switching from green sand to shell moulds due to less wastage of metal.
- Productivity increased from 30kg to 72kg per person per day and monthly delivery capacity increased from 400-700 pieces per month.
- Machining time for castings was reduced from 45 minutes to 37 minutes per piece using shell moulds due to less machining allowance needed.
- Rejection rates decreased from 8% to 3.5% by switching to shell moulds which produce castings with fewer defects.
This document summarizes a study comparing the green sand mould casting process to the shell mould casting process. Some key findings of switching from green sand to shell mould include:
- Yield increased from 65% to 78% due to less wastage in the shell mould process.
- Productivity more than doubled from 30kg to 72kg per person per day.
- Rejection rates decreased substantially from 8% to 3.5% due to fewer defects from the shell mould process.
- Sand usage was reduced by 9% from a sand to metal ratio of 1:14 to 1:5.
Internship presentation at Fabrimax Engg Pvt Ltdabhishekgawande
This document summarizes an industry internship presentation by two mechanical engineering students at G.H. Raisoni College of Engineering. The presentation describes the fabrication processes at Fabrimax Engineering Pvt Ltd, where the students interned. It provides an overview of the company and its quality standards. Key fabrication processes like CNC cutting, three roller bending, and submerged metal arc welding are explained. Post-weld inspection techniques like dye penetrant testing, radiography testing, and ultrasonic testing are also summarized. A case study on using a robotic system for automatic ultrasonic weld inspection is presented to improve production quality and rates.
Warner Land Surveys Ltd provides industrial measurement and dimensional control services for major refinery shutdowns and plant replacements. They have over 18 years of experience helping engineers replace refinery equipment on a first time basis. Their precise dimensional solutions are fit for purpose and do not interrupt plant operations. They take pride in understanding client accuracy needs and providing dimensions to 1mm.
Project Proposal for Predictive Maintenance Power PlantFerdous Kabir
S1. The document proposes establishing an industrial predictive maintenance and troubleshooting lab in Bangladesh to help power generation and production plants minimize costs and downtime through non-destructive testing (NDT) and condition monitoring techniques.
S2. The lab would develop NDT and condition monitoring facilities using methods like vibration analysis, oil analysis, ultrasonic testing, and thermal analysis to detect problems in power plants and save plants from failures.
S3. This predictive maintenance approach aims to reduce maintenance costs, minimize unplanned shutdowns, and increase plant efficiency and availability.
Pulse Electrical Current Assisted Sinter Rolling MillWassim Shirry
This document is a final report submitted by a group of mechanical engineering students to their professor for a project designing and building a powder rolling mill fitted with spark plasma sintering. The report details the design of the machine, which aims to simultaneously roll and sinter powdered aluminum into a continuous strip. It includes sections on the problem definition, concept generation and evaluation, final design embodiment, and a liability statement. The group is proud to present not only the design report but a working prototype to the professor.
This document provides details about an internship presentation on a residential construction project called Brigade Lakefront in Bangalore, India. It summarizes the project details including the client, contractor, architects involved and the scope of constructing residential towers. It then outlines contract details such as the letter of intent date, contract value, completion period and payment terms. Finally, it describes some of the intern's activities during the training including analyzing concrete pour delays, pump efficiencies, and learning about quality control processes.
Technology leader for industrial de-dustingAjay bajaj
Reliable dust removal was a task for specialists even at the beginning of the last century. Bag filters of Intensiv-Filter contribute to an improved environment for almost 94 years now. Also today the industrial dust removal has a mean significance. Modern technologies for efficient dust removal are a trend subject due to environmental impacts, climate change, rising energy consumption and conservation of natural ressources of renewable raw materials.
As technology leader in industrial de-dusting we offer complete and tailor-made solutions in the area of dust removal technology and product recovery.
The document describes REFRA-Training International Cement, an 11-day training course provided by Refratechnik Cement GmbH to customers involved in refractory materials. The training focuses on providing practical instruction and hands-on experience in selecting, installing, and using refractory materials efficiently and effectively in cement production. It covers topics like refractory material selection, installation methods, quality control, and the influence of process conditions on refractory lifetime. Experienced trainers provide morning lectures and participants engage in afternoon practical exercises. At the end, participants can test their knowledge and receive a certificate upon successful completion.
REFRA-Training Cement | A Unique Service Provided to Our CustomersRefratechnik Group
Training sessions, workshops and seminars organized at regular intervals for customers and their personnel involved in refractory affairs constitute a substantial part of Refratechnik's service and after sales care.
Recent Advancements in Automation and Remote Control TechnologySushant Kumar
This document discusses recent advancements in automation and remote control technology in mining. It notes that manual mining is physically demanding and dangerous, resulting in accidents, injuries, and death. Automation removes humans from hazardous mining processes. Examples of automated systems described include remote-controlled dump trucks and loaders, long-distance laser scanning robots for mapping abandoned mines, GPS tracking of vehicles, and automated conveyor belt controls. Automation improves safety, allows access to difficult areas, increases productivity and consistency, and reduces costs and accidents compared to manual mining.
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
Callum Taylor has over 30 years of experience in oil and gas operations. He is currently a Production Supervisor on the FPSO Aoka Mizu, where he is responsible for safe and efficient production operations and ensuring personnel are properly trained. Prior to his current role, Taylor worked as a Production Operator, Process Operator, and CRO on offshore platforms and onshore terminals. He holds various safety, emergency response, and technical qualifications.
Get Fit For The Future - Dry Ore Comminution TechnologyLOESCHE
Our dry comminution is flexible, sustainable and energy-efficient.
The LOESCHE layout characterizes through a compact design and hence a small plan footprint - ideal from brownfield, but also for greenfield projects.
The document provides details about Hindustan Zinc Limited, located in Udaipur. It discusses the history and background of the company, starting in 1968 as India's first zinc smelter. It then summarizes the key departments and processes at the plant, including roasting, leaching, electrolysis, and zinc dust production. The plant aims to improve productivity, recovery efficiency, and reduce costs through emphasis on energy conservation and process optimization.
Yokogawa provided its CENTUM CS 3000 distributed control system and ProSafe-RS safety instrumented system for the South Hook LNG Terminal in the UK, the largest LNG terminal in Europe. The terminal plays a major role in supplying natural gas to the UK and strengthening the strategic partnership between Qatar and the UK. Yokogawa's solutions help ensure plant safety and reliability through integrated automation and safety systems, effective data management with Exaquantum, and training operators using a simulator to handle abnormal situations safely. The customer is satisfied with Yokogawa's highly reliable systems contributing to the terminal's continuous 24/7/365 operations and supply of up to 20% of UK gas demand.
The document describes the Production4μ project which aims to develop ultra precision production technologies for optics manufacturing. It has a total budget of 15.43 million euros and involves multiple partners across the optics production process chain, from design to assembly. Key aspects covered include the precision glass moulding technology, the full process chain from tool making to glass preform production, and the development of new ultra low transition temperature glass materials suitable for the moulding process.
The document describes the Production4μ project which aims to develop ultra precision production technologies for optics manufacturing. It has a total budget of 15.43 million euros and involves multiple partners across the optics production process chain, from design to assembly. Key aspects covered include the precision glass moulding technology, the full process chain from tool making to glass preform production, and the development of new ultra low transition temperature glass materials suitable for the moulding process.
Liquid silicone rubber (LSR) in combination with other substrates, completed in a combination of injection molding, assembly and other process steps. Trelleborg Sealing Solutions is the world’s leading exponent of precision Liquid Silicone Rubber (LSR) and Two-Component (2C) manufacturing processes and tooling technology.
This document contains a summary of a candidate's qualifications for a Senior Cementing Supervisor position. The candidate has over 10 years of experience in cementing operations for various oilfield services companies in Algeria, Iraq, and the UAE. They have extensive technical knowledge and certifications in cementing equipment, operations, and safety. The candidate also has experience supervising cementing jobs and teams on both land and offshore rigs.
VEGA Pressure & Level Measurement Metal Processing Industry ApplicationsThorne & Derrick UK
VEGA provides measurement solutions for the demanding conditions in the metal processing industry. Their plics modular system allows for individual combinations of sensors, fittings, electronics and housings to meet technical and economic needs. Application examples show how VEGA instruments reliably measure levels, pressures and other process variables in challenging environments like mining, steel production, and smelting under high temperatures, dust, noise and abrasive conditions.
Productivity improvement of castings, switching to shell mould process from g...eSAT Publishing House
This document summarizes a study comparing the green sand mould casting process to the shell mould casting process. Some key findings include:
- Yield increased from 65% to 78% by switching from green sand to shell moulds due to less wastage of metal.
- Productivity increased from 30kg to 72kg per person per day and monthly delivery capacity increased from 400-700 pieces per month.
- Machining time for castings was reduced from 45 minutes to 37 minutes per piece using shell moulds due to less machining allowance needed.
- Rejection rates decreased from 8% to 3.5% by switching to shell moulds which produce castings with fewer defects.
This document summarizes a study comparing the green sand mould casting process to the shell mould casting process. Some key findings of switching from green sand to shell mould include:
- Yield increased from 65% to 78% due to less wastage in the shell mould process.
- Productivity more than doubled from 30kg to 72kg per person per day.
- Rejection rates decreased substantially from 8% to 3.5% due to fewer defects from the shell mould process.
- Sand usage was reduced by 9% from a sand to metal ratio of 1:14 to 1:5.
Internship presentation at Fabrimax Engg Pvt Ltdabhishekgawande
This document summarizes an industry internship presentation by two mechanical engineering students at G.H. Raisoni College of Engineering. The presentation describes the fabrication processes at Fabrimax Engineering Pvt Ltd, where the students interned. It provides an overview of the company and its quality standards. Key fabrication processes like CNC cutting, three roller bending, and submerged metal arc welding are explained. Post-weld inspection techniques like dye penetrant testing, radiography testing, and ultrasonic testing are also summarized. A case study on using a robotic system for automatic ultrasonic weld inspection is presented to improve production quality and rates.
Warner Land Surveys Ltd provides industrial measurement and dimensional control services for major refinery shutdowns and plant replacements. They have over 18 years of experience helping engineers replace refinery equipment on a first time basis. Their precise dimensional solutions are fit for purpose and do not interrupt plant operations. They take pride in understanding client accuracy needs and providing dimensions to 1mm.
Project Proposal for Predictive Maintenance Power PlantFerdous Kabir
S1. The document proposes establishing an industrial predictive maintenance and troubleshooting lab in Bangladesh to help power generation and production plants minimize costs and downtime through non-destructive testing (NDT) and condition monitoring techniques.
S2. The lab would develop NDT and condition monitoring facilities using methods like vibration analysis, oil analysis, ultrasonic testing, and thermal analysis to detect problems in power plants and save plants from failures.
S3. This predictive maintenance approach aims to reduce maintenance costs, minimize unplanned shutdowns, and increase plant efficiency and availability.
Pulse Electrical Current Assisted Sinter Rolling MillWassim Shirry
This document is a final report submitted by a group of mechanical engineering students to their professor for a project designing and building a powder rolling mill fitted with spark plasma sintering. The report details the design of the machine, which aims to simultaneously roll and sinter powdered aluminum into a continuous strip. It includes sections on the problem definition, concept generation and evaluation, final design embodiment, and a liability statement. The group is proud to present not only the design report but a working prototype to the professor.
This document provides details about an internship presentation on a residential construction project called Brigade Lakefront in Bangalore, India. It summarizes the project details including the client, contractor, architects involved and the scope of constructing residential towers. It then outlines contract details such as the letter of intent date, contract value, completion period and payment terms. Finally, it describes some of the intern's activities during the training including analyzing concrete pour delays, pump efficiencies, and learning about quality control processes.
Technology leader for industrial de-dustingAjay bajaj
Reliable dust removal was a task for specialists even at the beginning of the last century. Bag filters of Intensiv-Filter contribute to an improved environment for almost 94 years now. Also today the industrial dust removal has a mean significance. Modern technologies for efficient dust removal are a trend subject due to environmental impacts, climate change, rising energy consumption and conservation of natural ressources of renewable raw materials.
As technology leader in industrial de-dusting we offer complete and tailor-made solutions in the area of dust removal technology and product recovery.
The document describes REFRA-Training International Cement, an 11-day training course provided by Refratechnik Cement GmbH to customers involved in refractory materials. The training focuses on providing practical instruction and hands-on experience in selecting, installing, and using refractory materials efficiently and effectively in cement production. It covers topics like refractory material selection, installation methods, quality control, and the influence of process conditions on refractory lifetime. Experienced trainers provide morning lectures and participants engage in afternoon practical exercises. At the end, participants can test their knowledge and receive a certificate upon successful completion.
REFRA-Training Cement | A Unique Service Provided to Our CustomersRefratechnik Group
Training sessions, workshops and seminars organized at regular intervals for customers and their personnel involved in refractory affairs constitute a substantial part of Refratechnik's service and after sales care.
Recent Advancements in Automation and Remote Control TechnologySushant Kumar
This document discusses recent advancements in automation and remote control technology in mining. It notes that manual mining is physically demanding and dangerous, resulting in accidents, injuries, and death. Automation removes humans from hazardous mining processes. Examples of automated systems described include remote-controlled dump trucks and loaders, long-distance laser scanning robots for mapping abandoned mines, GPS tracking of vehicles, and automated conveyor belt controls. Automation improves safety, allows access to difficult areas, increases productivity and consistency, and reduces costs and accidents compared to manual mining.
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
The document discusses infrared monitoring of cement kiln shells. It notes that the rotary kiln is a critical step in the cement manufacturing process, so understanding the condition of the refractory material coating the kiln is important to extend its life and prevent failures. Since the inside temperature cannot be measured, looking at the outer surface is the only way to determine the refractory condition. The document introduces the CS400 Kiln Shell Imaging System by Fluke Process Instruments, which uses continuous infrared monitoring to help detect hot spots, reduce setup times, avoid damage, and optimize the kiln's life in harsh cement manufacturing environments.
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
The document discusses cement processing and how infrared monitoring of kiln shells is critical for cement manufacturing. It explains that monitoring the outer surface of kilns is the only way to determine the condition of the refractory material inside since temperatures cannot be measured directly from within. The Fluke CS400 Kiln Shell Imaging System was developed to help continuously detect hot spots on kiln shells through infrared monitoring to extend the life of kilns and prevent failures.
The document discusses infrared monitoring of cement kiln shells. It notes that the rotary kiln is a critical step in the cement manufacturing process, so understanding the condition of the refractory material coating the kiln is important to extend its life and prevent failures. Since the inside temperature cannot be measured, looking at the outer surface is the only way to determine the refractory condition. The document introduces the CS400 Kiln Shell Imaging System by Fluke Process Instruments, which uses continuous infrared monitoring to help detect hot spots, reduce setup times, avoid damage, and optimize the kiln's life in harsh cement manufacturing environments.
"For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users"
For nearly every cement manufacturing process, one of the most critical steps take place within the rotary kiln. Because of this, it is imperative that users understand the condition of the refractory material coating the kiln to extend its operating life, as well as to prevent any disastrous failures.
Since users have no way to measure temperatures from inside of the kiln, looking at the outer surface is the only way to determine the refractory condition of the kiln. To aid operators in this task, Fluke Process Instruments has developed a continuous infrared process monitoring solution – the CS400 Kiln Shell Imaging System – which is designed to help users continuously detect hot spots, reduce set up times, avoid costly damage, optimize the kiln’s operational life and more, even in the harshest cement manufacturing environments.
Things to Consider When Choosing a Website Developer for your Website | FODUUFODUU
Choosing the right website developer is crucial for your business. This article covers essential factors to consider, including experience, portfolio, technical skills, communication, pricing, reputation & reviews, cost and budget considerations and post-launch support. Make an informed decision to ensure your website meets your business goals.
AI-Powered Food Delivery Transforming App Development in Saudi Arabia.pdfTechgropse Pvt.Ltd.
In this blog post, we'll delve into the intersection of AI and app development in Saudi Arabia, focusing on the food delivery sector. We'll explore how AI is revolutionizing the way Saudi consumers order food, how restaurants manage their operations, and how delivery partners navigate the bustling streets of cities like Riyadh, Jeddah, and Dammam. Through real-world case studies, we'll showcase how leading Saudi food delivery apps are leveraging AI to redefine convenience, personalization, and efficiency.
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
UiPath Test Automation using UiPath Test Suite series, part 6DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Monitoring and Managing Anomaly Detection on OpenShift.pdfTosin Akinosho
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Full-RAG: A modern architecture for hyper-personalizationZilliz
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Best 20 SEO Techniques To Improve Website Visibility In SERPPixlogix Infotech
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Infrastructure Challenges in Scaling RAG with Custom AI modelsZilliz
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
GraphRAG for Life Science to increase LLM accuracyTomaz Bratanic
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Ocean lotus Threat actors project by John Sitima 2024 (1).pptxSitimaJohn
Ocean Lotus cyber threat actors represent a sophisticated, persistent, and politically motivated group that poses a significant risk to organizations and individuals in the Southeast Asian region. Their continuous evolution and adaptability underscore the need for robust cybersecurity measures and international cooperation to identify and mitigate the threats posed by such advanced persistent threat groups.
Programming Foundation Models with DSPy - Meetup SlidesZilliz
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Cement Processing.pdf
1. Cement Processing
Cement Processing - Infrared Monitoring of Kiln Shells
For nearly every cement manufacturing process, one of the most
critical steps take place within the rotary kiln. Because of this, it is
imperative that users understand the condition of the refractory
material coating the kiln to extend its operating life, as well as to
prevent any disastrous failures.
2. Since users have no way to measure temperatures from inside of
the kiln, looking at the outer surface is the only way to determine
the refractory condition of the kiln. To aid operators in this task,
Fluke Process Instruments has developed a continuous infrared
process monitoring solution – the CS400 Kiln Shell Imaging
System – which is designed to help users continuously detect hot
spots, reduce set up times, avoid costly damage, optimize the
kiln’s operational life and more, even in the harshest cement
manufacturing environments.