This document provides instructions for servicing components of a Caterpillar 950H wheel loader powered by a C7 engine, including:
1. Instructions for removing and installing the gear pump for the axle oil cooler, which involves cleaning parts, installing seals and bearings, and securing with retaining rings.
2. Instructions for installing the axle oil cooler pump and clutch, which involves connecting components with bolts and belts.
3. Instructions for removing and installing the fuel filter base, which involves disconnecting hoses and harnesses and securing the base with bolts.
The document provides a list of engine control trouble codes for a 1KZ-TE engine, including:
1. Code numbers, diagnosis items, abnormal conditions, and probable inspection areas.
2. Terminal configurations and inspection items/standards for the engine control computer.
3. Trouble codes are given for issues like crank/cam sensors, fuel/air sensors, injection timing, and more.
4. Inspection procedures are outlined for terminals on the computer to diagnose sensor/circuit problems.
The document contains a list of 978 diagnostic trouble codes for a machine, including the code, description, machine reaction, and extended fault text for each code. Common codes include issues with the rail pressure control system, injectors, sensors for intake pressure and temperature, fuel and oil temperature, and turbocharger overboost. The codes trigger reactions like torque reduction, delayed engine stop, or limp home mode.
PERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (Model PV)Service Repai...jknmms ekdms
This is the Highly Detailed factory service repair manual for thePERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (MODEL PV), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.PERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (MODEL PV) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to havePERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (MODEL PV) Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
The document contains an error code list for an ERGOPOWER EST-37 transmission control unit. It lists various error codes, possible causes, and reactions from the transmission control unit. It also provides steps to repair issues and notes additional details like which operating modes the transmission may enter under certain fault conditions.
Caterpillar cat gp30 n forklift lift trucks service repair manual snt13f 3001...fjjskkdmnsme
This service manual provides maintenance and repair information for various truck models. It covers topics such as general information, specifications, cooling systems, electrical systems, power trains, brakes, hydraulics and more. The manual includes removal and installation guides, inspection and adjustment procedures, troubleshooting tips, and service data to aid technicians in servicing the trucks. Serial number locations, dimensions, and technical data are provided for each truck model.
The document lists various automotive electrical parts including starters, alternators, motors, pumps, switches, and gauges/meters, providing part numbers and descriptions for each. It appears to be a catalog from an automotive electrical parts supplier listing the types of parts available to customers along with relevant specifications. The extensive list of parts and level of detail provided indicates this supplier offers a wide range of replacement automotive electrical components.
This document contains a list of various electrical system components for a vehicle. It includes parts like the starter motor, batteries, alternator, fuses, relays, switches, and wiring diagrams. The list appears to describe the basic electrical circuits involved in starting the vehicle, running accessories, and charging the battery. Diagrams show the wiring connections between the battery, starter, ignition switch, and other core components.
The document provides a list of engine control trouble codes for a 1KZ-TE engine, including:
1. Code numbers, diagnosis items, abnormal conditions, and probable inspection areas.
2. Terminal configurations and inspection items/standards for the engine control computer.
3. Trouble codes are given for issues like crank/cam sensors, fuel/air sensors, injection timing, and more.
4. Inspection procedures are outlined for terminals on the computer to diagnose sensor/circuit problems.
The document contains a list of 978 diagnostic trouble codes for a machine, including the code, description, machine reaction, and extended fault text for each code. Common codes include issues with the rail pressure control system, injectors, sensors for intake pressure and temperature, fuel and oil temperature, and turbocharger overboost. The codes trigger reactions like torque reduction, delayed engine stop, or limp home mode.
PERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (Model PV)Service Repai...jknmms ekdms
This is the Highly Detailed factory service repair manual for thePERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (MODEL PV), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.PERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (MODEL PV) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to havePERKINS 1106C-E70TA AND 1106D-E70TA INDUSTRIAL ENGINE (MODEL PV) Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
The document contains an error code list for an ERGOPOWER EST-37 transmission control unit. It lists various error codes, possible causes, and reactions from the transmission control unit. It also provides steps to repair issues and notes additional details like which operating modes the transmission may enter under certain fault conditions.
Caterpillar cat gp30 n forklift lift trucks service repair manual snt13f 3001...fjjskkdmnsme
This service manual provides maintenance and repair information for various truck models. It covers topics such as general information, specifications, cooling systems, electrical systems, power trains, brakes, hydraulics and more. The manual includes removal and installation guides, inspection and adjustment procedures, troubleshooting tips, and service data to aid technicians in servicing the trucks. Serial number locations, dimensions, and technical data are provided for each truck model.
The document lists various automotive electrical parts including starters, alternators, motors, pumps, switches, and gauges/meters, providing part numbers and descriptions for each. It appears to be a catalog from an automotive electrical parts supplier listing the types of parts available to customers along with relevant specifications. The extensive list of parts and level of detail provided indicates this supplier offers a wide range of replacement automotive electrical components.
This document contains a list of various electrical system components for a vehicle. It includes parts like the starter motor, batteries, alternator, fuses, relays, switches, and wiring diagrams. The list appears to describe the basic electrical circuits involved in starting the vehicle, running accessories, and charging the battery. Diagrams show the wiring connections between the battery, starter, ignition switch, and other core components.
Toyota forklift spare parts factory zefeng 8618721729659chu aimee
forklift spare parts manufacturer from China , most parts are produced by ourself with competitive offer .
pls contact me : zefengsales5@zefengseal.com
whatsaapp/wechat: +8618721729659
Hyundai hsl850 7 skid steer loader service repair manualfjjsekdmme
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing the motor by draining oil, loosening bolts, and removing hydraulic lines and covers.
2) Disassembling the motor by removing pins, plates, seals, and shafts.
3) Cleaning and inspecting individual parts before reassembly.
4) Reassembling the motor by reversing the disassembly steps, replacing seals, and torquing bolts.
Perkins 1100 series 1104 d (mech) industrial engine model (nm) service repair...fhjsekdmme
This document provides safety information and instructions for disassembling and assembling components of an 1104D industrial engine. It cautions that most accidents during operation, maintenance and repair are caused by failure to follow basic safety rules. The document outlines hazards, provides warnings, and advises only performing work if properly trained and equipped. It also recommends only using genuine Perkins replacement parts.
2006 Toyota Hiace OEm Electrical Wiring DiagramsDardoorASM
This is the original electrical wiring diagrams of the Toyota Hiace model 2006 for reference only. For more auto workshop service and repair manual please visit dardoor.com.
Ddec iv on highway - egr application and installationeckardguendel
This document describes the hardware and wiring used in a DDEC IV engine control system for on-highway applications. It discusses the engine sensor harness, vehicle interface harness, electronic control module, sensors, and other components. Wiring diagrams and connector pinouts are provided for the harnesses connecting these components to the ECM. Environmental requirements and part numbers for components are also listed.
Manual de manutenção de caminhões eletrônicosMarcelo Auler
O documento fornece informações sobre manutenção de caminhões de diferentes marcas e modelos, incluindo Volvo, Scania, Mercedes Benz e Iveco, com detalhes sobre sistemas de injeção, sensores e procedimentos de regulagem de válvulas.
1. The document provides torque specifications for engine components on Detroit Diesel engines, including the air compressor drive gear nut which is specified as 210-250 N·m (155-185 lb·ft).
2. Instructions are given for installing the air compressor, including torquing the drive gear nut to 210-250 N·m and installing coolant and air lines.
3. Precautions are listed to ensure proper installation of the air compressor bolts, coolant lines, and retaining components.
Caterpillar cat 3054 c industrial engine (prefix 334) service repair manual (...fujsefkskekmm
- The document provides installation instructions for a fuel injection pump on a 3054C industrial engine.
- It describes 11 steps for installing the pump, including installing seals, bolts, gears, tubes and ensuring proper timing.
- Proper installation of the spacer and bolts is emphasized to prevent contacting the pump shaft.
This document provides torque specifications and installation tips for cylinder head gaskets and bolts from Fel-Pro. It begins with how to use the torque tables, which are organized by vehicle manufacturer, engine details, and specify tightening sequences and specifications. Tips are provided for Fel-Pro PermaTorque cylinder head gaskets and torque-to-yield bolts. The document contains specifications for domestic and imported vehicles and directs the user to diagrams for tightening sequences.
This is the Highly Detailed factory service repair manual for thePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.PERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to havePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Cummins qsb6.7 engines service repair manualfjkskmmdmme
This document is the troubleshooting and repair manual for Cummins ISB, ISBe4, QSB4.5, QSB5.9, QSB6.7, ISC, QSC8.3, ISL, ISLe3 and QSL9 engines and the CM850 electronic control system. It provides instructions for troubleshooting and repairing these engines in vehicles or equipment. The manual is organized to guide technicians through identifying and correcting engine-related problems. It includes safety instructions, cleaning and repair guidelines, and specifications.
This document provides:
1) An overview of the wiring diagrams for a 2006-2008 Ford Ranger/Everest, outlining the various sections and supplements.
2) A ground point diagram showing the main ground connection points throughout the vehicle.
3) Sample pages from the wiring diagram manual, including an engine control system diagram and explanations of symbols used.
Case 430 tier 3, 440 tier 3 skid steer and 440 ct tier 3 compact track loader...jksjmdmd
This document provides information on fluids, lubricants, and fuel for 430/440 skid steer and 440CT compact track loaders, including:
- Capacities and specifications for engine oil, hydraulic fluid, grease, fuel, coolant, and other fluids.
- Guidelines for selecting the proper engine oil viscosity based on ambient temperature.
- Specifications for acceptable No. 2 diesel fuel, including flash point, pour point, viscosity, cetane number, and limits on water and sulfur content.
- Recommendations for fuel storage and preventing water contamination.
1) El documento describe el funcionamiento del sistema Comfort Shift (CS) de Scania, un sistema electroneumático de cambio de marchas. 2) Los componentes principales del sistema incluyen cilindros de accionamiento, sensores de posición, válvulas de solenoide y una unidad de mando. 3) El sistema complementa una caja de cambios manual convencional al sustituir el mecanismo de cambio por cilindros neumáticos controlados electrónicamente.
1. O documento lista os sensores do sistema de controle do motor e fornece códigos de informação e códigos de falha.
2. É observada a diferença entre códigos de falha e códigos de informação, sendo que estes últimos não indicam falhas.
3. São fornecidos detalhes sobre os códigos de falha, incluindo ID, descrição da falha e componente afetado.
The document provides information on a technical presentation covering the 950H and 962H wheel loaders and IT62H integrated toolcarrier. It describes the audience and content of the presentation, which focuses on component locations, engine operation, and the operation of the power train, implement, steering, and brake systems. The objectives are to locate and identify major components, explain the operation of each system, and trace oil flow through the systems. The presentation is estimated to take 30 hours to complete and includes 209 visuals.
Este documento fornece informações técnicas sobre os motores Volvo D12C/D12D, incluindo suas especificações, componentes e sistemas. Resume-se em 3 frases:
O documento descreve os detalhes dos motores Volvo D12C/D12D, incluindo suas especificações, componentes do motor como bloco do cilindro, cabeçote, pistão e anéis, sistema de válvulas, engrenagens de distribuição, sistema de lubrificação, arrefecimento e controle. Fornece também dados técn
Yale (b910) glc060 vx lift truck service repair manualjjskefkskemik
This service manual provides information on servicing and repairing various models of GC/GLC lift trucks. The document outlines procedures for removing and installing components like the counterweight, hood, overhead guard, engine, transmission, and covers. It contains sections on the frame description, removing the hood and seat, and replacing side covers. Safety warnings are provided, and diagrams show the locations of parts. Repair sections cover topics such as the cooling system, fuel systems, mast, cylinders, and electrical systems.
This document provides instructions for assembling the gear pump for an axle oil cooler on a Caterpillar 950H wheel loader. It describes installing various seals, bearings, gears, and other components in 20 steps. It directs the technician to use retaining ring pliers to install one part and concludes by stating to install the axle oil cooler pump and clutch by referring to another section of the manual.
The document provides instructions for assembling and installing the gear pump for an axle oil cooler on a Caterpillar 950H wheel loader. It describes 20 steps to install bearings, seals, gears, shafts, and covers onto the gear pump body. It then provides instructions for installing the assembled gear pump along with the axle oil cooler pump and clutch.
Toyota forklift spare parts factory zefeng 8618721729659chu aimee
forklift spare parts manufacturer from China , most parts are produced by ourself with competitive offer .
pls contact me : zefengsales5@zefengseal.com
whatsaapp/wechat: +8618721729659
Hyundai hsl850 7 skid steer loader service repair manualfjjsekdmme
The document provides instructions for removing and installing a travel motor on an excavator. It describes:
1) Removing the motor by draining oil, loosening bolts, and removing hydraulic lines and covers.
2) Disassembling the motor by removing pins, plates, seals, and shafts.
3) Cleaning and inspecting individual parts before reassembly.
4) Reassembling the motor by reversing the disassembly steps, replacing seals, and torquing bolts.
Perkins 1100 series 1104 d (mech) industrial engine model (nm) service repair...fhjsekdmme
This document provides safety information and instructions for disassembling and assembling components of an 1104D industrial engine. It cautions that most accidents during operation, maintenance and repair are caused by failure to follow basic safety rules. The document outlines hazards, provides warnings, and advises only performing work if properly trained and equipped. It also recommends only using genuine Perkins replacement parts.
2006 Toyota Hiace OEm Electrical Wiring DiagramsDardoorASM
This is the original electrical wiring diagrams of the Toyota Hiace model 2006 for reference only. For more auto workshop service and repair manual please visit dardoor.com.
Ddec iv on highway - egr application and installationeckardguendel
This document describes the hardware and wiring used in a DDEC IV engine control system for on-highway applications. It discusses the engine sensor harness, vehicle interface harness, electronic control module, sensors, and other components. Wiring diagrams and connector pinouts are provided for the harnesses connecting these components to the ECM. Environmental requirements and part numbers for components are also listed.
Manual de manutenção de caminhões eletrônicosMarcelo Auler
O documento fornece informações sobre manutenção de caminhões de diferentes marcas e modelos, incluindo Volvo, Scania, Mercedes Benz e Iveco, com detalhes sobre sistemas de injeção, sensores e procedimentos de regulagem de válvulas.
1. The document provides torque specifications for engine components on Detroit Diesel engines, including the air compressor drive gear nut which is specified as 210-250 N·m (155-185 lb·ft).
2. Instructions are given for installing the air compressor, including torquing the drive gear nut to 210-250 N·m and installing coolant and air lines.
3. Precautions are listed to ensure proper installation of the air compressor bolts, coolant lines, and retaining components.
Caterpillar cat 3054 c industrial engine (prefix 334) service repair manual (...fujsefkskekmm
- The document provides installation instructions for a fuel injection pump on a 3054C industrial engine.
- It describes 11 steps for installing the pump, including installing seals, bolts, gears, tubes and ensuring proper timing.
- Proper installation of the spacer and bolts is emphasized to prevent contacting the pump shaft.
This document provides torque specifications and installation tips for cylinder head gaskets and bolts from Fel-Pro. It begins with how to use the torque tables, which are organized by vehicle manufacturer, engine details, and specify tightening sequences and specifications. Tips are provided for Fel-Pro PermaTorque cylinder head gaskets and torque-to-yield bolts. The document contains specifications for domestic and imported vehicles and directs the user to diagrams for tightening sequences.
This is the Highly Detailed factory service repair manual for thePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.PERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to havePERKINS 1100 SERIES 1104D INDUSTRIAL ENGINE (MODEL NJ) Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Cummins qsb6.7 engines service repair manualfjkskmmdmme
This document is the troubleshooting and repair manual for Cummins ISB, ISBe4, QSB4.5, QSB5.9, QSB6.7, ISC, QSC8.3, ISL, ISLe3 and QSL9 engines and the CM850 electronic control system. It provides instructions for troubleshooting and repairing these engines in vehicles or equipment. The manual is organized to guide technicians through identifying and correcting engine-related problems. It includes safety instructions, cleaning and repair guidelines, and specifications.
This document provides:
1) An overview of the wiring diagrams for a 2006-2008 Ford Ranger/Everest, outlining the various sections and supplements.
2) A ground point diagram showing the main ground connection points throughout the vehicle.
3) Sample pages from the wiring diagram manual, including an engine control system diagram and explanations of symbols used.
Case 430 tier 3, 440 tier 3 skid steer and 440 ct tier 3 compact track loader...jksjmdmd
This document provides information on fluids, lubricants, and fuel for 430/440 skid steer and 440CT compact track loaders, including:
- Capacities and specifications for engine oil, hydraulic fluid, grease, fuel, coolant, and other fluids.
- Guidelines for selecting the proper engine oil viscosity based on ambient temperature.
- Specifications for acceptable No. 2 diesel fuel, including flash point, pour point, viscosity, cetane number, and limits on water and sulfur content.
- Recommendations for fuel storage and preventing water contamination.
1) El documento describe el funcionamiento del sistema Comfort Shift (CS) de Scania, un sistema electroneumático de cambio de marchas. 2) Los componentes principales del sistema incluyen cilindros de accionamiento, sensores de posición, válvulas de solenoide y una unidad de mando. 3) El sistema complementa una caja de cambios manual convencional al sustituir el mecanismo de cambio por cilindros neumáticos controlados electrónicamente.
1. O documento lista os sensores do sistema de controle do motor e fornece códigos de informação e códigos de falha.
2. É observada a diferença entre códigos de falha e códigos de informação, sendo que estes últimos não indicam falhas.
3. São fornecidos detalhes sobre os códigos de falha, incluindo ID, descrição da falha e componente afetado.
The document provides information on a technical presentation covering the 950H and 962H wheel loaders and IT62H integrated toolcarrier. It describes the audience and content of the presentation, which focuses on component locations, engine operation, and the operation of the power train, implement, steering, and brake systems. The objectives are to locate and identify major components, explain the operation of each system, and trace oil flow through the systems. The presentation is estimated to take 30 hours to complete and includes 209 visuals.
Este documento fornece informações técnicas sobre os motores Volvo D12C/D12D, incluindo suas especificações, componentes e sistemas. Resume-se em 3 frases:
O documento descreve os detalhes dos motores Volvo D12C/D12D, incluindo suas especificações, componentes do motor como bloco do cilindro, cabeçote, pistão e anéis, sistema de válvulas, engrenagens de distribuição, sistema de lubrificação, arrefecimento e controle. Fornece também dados técn
Yale (b910) glc060 vx lift truck service repair manualjjskefkskemik
This service manual provides information on servicing and repairing various models of GC/GLC lift trucks. The document outlines procedures for removing and installing components like the counterweight, hood, overhead guard, engine, transmission, and covers. It contains sections on the frame description, removing the hood and seat, and replacing side covers. Safety warnings are provided, and diagrams show the locations of parts. Repair sections cover topics such as the cooling system, fuel systems, mast, cylinders, and electrical systems.
This document provides instructions for assembling the gear pump for an axle oil cooler on a Caterpillar 950H wheel loader. It describes installing various seals, bearings, gears, and other components in 20 steps. It directs the technician to use retaining ring pliers to install one part and concludes by stating to install the axle oil cooler pump and clutch by referring to another section of the manual.
The document provides instructions for assembling and installing the gear pump for an axle oil cooler on a Caterpillar 950H wheel loader. It describes 20 steps to install bearings, seals, gears, shafts, and covers onto the gear pump body. It then provides instructions for installing the assembled gear pump along with the axle oil cooler pump and clutch.
The document provides instructions for assembling and installing the gear pump for an axle oil cooler on a Caterpillar 950H wheel loader. It describes 20 steps to install bearings, seals, gears, shafts, and covers onto the gear pump body. It then provides instructions for installing the assembled gear pump along with the axle oil cooler pump and clutch.
Caterpillar Cat 140K Motor Grader (Prefix SZL) Service Repair Manual Instant ...hean57759707
This document provides instructions for removing and installing the tandem and cover on a 140K Motor Grader. It describes:
1) Using various tools to lift and support the tandem housing assembly, which weighs approximately 612 kg/1350 lbs.
2) Removing bolts and disconnecting hoses to separate the tandem housing from the brake and wheel spindle housing.
3) Installing gaskets and covers, and tightening bolts to specified torques.
4) Lifting and positioning the tandem housing during installation.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
This document provides instructions for removing and installing the front gear group on a Caterpillar 3412E engine. It describes:
1. Aligning timing marks and removing the idler gear, bearing, thrust washer, and shaft.
2. Cleaning and installing the shaft, washer, bearing, and idler gear while aligning timing marks.
3. The procedure is accompanied by illustrations and notes on required tools.
The document provides instructions for installing a turbocharger on a Caterpillar D250E articulated truck with a 3306 engine. It describes:
1) Installing a new gasket and positioning the turbocharger on the exhaust manifold with four bolts.
2) Attaching the oil supply and drain tubes to the turbocharger and engine with bolts and clamps.
3) Tightening the bolts on the turbocharger housing to the specified torque.
The document provides instructions for removing and installing an exhaust manifold on a Caterpillar D250E articulated truck with a 3306 engine. The key steps are:
1. Remove the turbocharger for access.
2. Remove nuts and bolts securing the exhaust manifold, fuel lines, and heat shield.
3. Lift off the exhaust manifold and remove any gaskets or studs.
4. Installation is the reverse of removal, ensuring clean parts and replacing any worn components.
The document provides instructions for removing and installing an exhaust manifold on a Caterpillar D250E articulated truck with a 3306 engine. The key steps are:
1. Remove the turbocharger for access.
2. Remove nuts and bolts securing the exhaust manifold, fuel lines, and heat shield.
3. Lift off the exhaust manifold and remove any gaskets or studs.
4. Installation is the reverse of removal, ensuring clean parts and proper positioning of gaskets and studs.
Caterpillar cat 320 c ln excavator (prefix axk) service repair manual (axk000...ujfdjdjfkjksk
This document provides instructions for removing and installing the engine oil pump on a 320C LN excavator powered by a 3066 engine. It describes removing the front housing, cover, gears, seals, and spindle. It then describes installing these components in reverse order, including heating some parts for easier installation. Precautions are provided regarding cleaning, fluids, and personal protective equipment.
Caterpillar cat 320 c ln excavator (prefix axk) service repair manual (axk000...fjjskkdmnsme
This document provides instructions for removing and installing the engine oil pump on a 320C LN excavator powered by a 3066 engine. It describes removing the front housing, cover, gears, seals, and spindle. It then describes installing new seals, heating components, and reinstalling gears, cover, and front housing. Removal and installation of the water pump is also described.
Similar to Caterpillar cat 950 h wheel loader (prefix jad) service repair manual (jad00001 and up) (17)
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 7jc) service ...fjjskkemsmee
This document provides instructions for removing and installing a torque divider on a Caterpillar D8L track-type tractor. It describes in 22 steps how to disassemble the torque divider by removing components like the planet carrier, shafts, gears, seals and housing. It then describes in 51 steps the reverse process of assembling the torque divider, including pressing bearings into place and installing seals, gears and other components back into the housing. The overall document provides very detailed technical instructions for servicing the torque divider.
Caterpillar cat d8 l track type tractor dozer bulldozer (prefix 4fb) service ...fjjskkemsmee
This document provides instructions for servicing the high-low transmission of a D8L track-type tractor. It describes how to remove and install the transmission, including disconnecting wiring and hoses. It also details how to disassemble and assemble the internal components of the transmission, such as removing clutches, carriers, discs, plates, pistons, gears, seals, and bearings. Precise tooling and procedures are specified to correctly service the transmission.
Caterpillar cat d5 c track type tractor dozer bulldozer (prefix 3mk) service ...fjjskkemsmee
The document provides instructions for removing and installing various components of the drive train on a D5C track-type tractor, including the drive shaft, steering clutch control valves, steering clutches, and related parts. Specific steps include draining fluids, removing covers, disconnecting linkages, and removing components by loosening bolts and nuts. Reinstallation follows the removal steps in reverse order, applying threadlock and sealants as needed and torquing fasteners to specified values.
Caterpillar cat 994 h wheel loader (prefix dwc) service repair manual (dwc000...fjjskkemsmee
This document provides assembly instructions for a piston pump used in the steering system of a 994H wheel loader. It outlines 44 steps to assemble the pump components, including installing bearings, seals, pistons, springs, and mounting the assembled pump. Proper measurement and shim selection are required to achieve the correct lift-off clearance. The instructions also cover reinstalling hydraulic lines and tanks once the pump is assembled.
Caterpillar cat 994 f wheel loader (prefix 442) service repair manual (442000...fjjskkemsmee
1. The document provides instructions for removing and installing the front drive housing and vibration damper of a Caterpillar 994F wheel loader.
2. To remove the front drive housing, various components must first be removed, including the oil filter base, crankshaft seal, accessory drive, and more. Tools and lifting devices are needed to remove the housing.
3. To remove the vibration damper, the pulley, hub, and damper group/assembly must be detached using guide bolts and lifting devices, as the components are heavy. Proper lubrication and torque specifications must be followed for reinstallation.
Caterpillar cat 994 d wheel loader (prefix 3tz) service repair manual (3tz000...fjjskkemsmee
The document provides instructions for removing, disassembling, assembling, and installing an engine oil pump on a Caterpillar 994D wheel loader. The removal procedure involves draining coolant, disconnecting electrical connections, and removing mounting brackets and hoses using various tools. The oil pump is then slid off the drive shaft. Disassembly further involves removing covers, gaskets, springs, and bearings. Assembly is the reverse of disassembly and proper positioning of parts is emphasized. Installation involves lifting the pump back onto the drive shaft and reattaching hoses and brackets.
The document provides instructions for servicing components of a 994 wheel loader, including:
- Removing and installing the supplemental steer pump, which involves removing hydraulic lines and bolts then reversing the steps to install.
- Disassembling and assembling the supplemental steer pump, which involves removing seals, plates, gears, and reversing the steps to assemble.
- Removing and installing the steering control valve, which involves disconnecting hydraulic lines and removing mounting bolts then reversing the steps to install.
- Disassembling and assembling the steering control valve, which involves removing plugs, springs, valves, and reversing the steps to assemble.
- Removing and installing the steering neutralizer valve, which
Caterpillar cat 993 k wheel loader (prefix z9k) service repair manual (z9k000...fjjskkemsmee
This document provides instructions for disassembling and assembling the input transfer gears of a 993K wheel loader transmission. It is a 26 step process that involves removing housing components and gears, inspecting and replacing parts as needed, heating and pressing bearings into place, measuring gear end play, and reassembling components using torque specifications and feeler gauges to ensure proper spacing. Tools required include eyebolts, drivers, dial indicators, thickness gauges, and lifting devices to maneuver the various heavy transmission parts. Proper cleaning and inspection of parts is emphasized to avoid problems during reassembly.
Caterpillar cat 993 k wheel loader (prefix z8z) service repair manual (z8z000...fjjskkemsmee
This document provides instructions for disassembling and assembling the parking brake on a 993K Wheel Loader. It describes removing components like the brake housing, pistons, discs, and shaft. It then explains assembling these components in reverse order. Special tools are listed and safety precautions mentioned. The process involves 17 detailed steps over two procedures for disassembly and assembly.
Caterpillar cat 993 k wheel loader (prefix z8d) service repair manual (z8d000...fjjskkemsmee
This document provides instructions for removing and installing various engine components on a Caterpillar 993K wheel loader, including:
- Inlet and exhaust valves, guides, and seat inserts
- Engine oil filter base
- Engine oil cooler
The procedures describe using various tools to remove parts like valves, guides, filters, hoses, and the oil cooler assembly. Installation is generally the reverse of removal, with instructions to clean parts, apply sealant or lubricant, and torque fasteners to the specified values. Safety notices warn of spring hazards and maintaining cleanliness to prevent premature wear.
Caterpillar cat 993 k wheel loader (prefix z4z) service repair manual (z4z000...fjjskkemsmee
The document provides instructions for disassembling and assembling the parking brake on a Caterpillar 993K wheel loader. It describes removing 16 different components of the parking brake including pistons, springs, discs, and housings. The assembly section then lists 17 steps for reinstalling these components in reverse order and adjusting associated bolts and seals. Tools including pullers, drivers, and sealant are required to complete the process safely and properly.
Caterpillar cat 993 k wheel loader (prefix z4d) service repair manual (z4d000...fjjskkemsmee
This document provides instructions for disassembling the service brake and final drive components of a 993K wheel loader. The service brake disassembly procedure involves removing reaction plates, discs, springs and other parts. The final drive disassembly involves removing planetary carriers, gears, bushings, retainers and other components. Detailed steps and illustrations are provided to guide mechanics through the process safely using the proper tools. Cleanliness is emphasized to prevent dirt from entering mechanical parts during disassembly.
Caterpillar cat 993 k wheel loader (prefix lwa) service repair manual (lwa000...fjjskkemsmee
This document provides instructions for removing and installing rear power take-off (RPTO) components on a 993K wheel loader. It describes disassembling the RPTO by removing nuts, bearings, gears, and cones. It then describes reassembling the RPTO by pressing in new bearings and cones and reinstalling gears, nuts, and locks. Separate sections provide instructions for installing the entire RPTO assembly and removing/installing the vibration damper and pulley.
Caterpillar cat 992 k wheel loader (prefix rm2) service repair manual (rm2000...fjjskkemsmee
The document provides instructions for disassembling and assembling various components of a Caterpillar 992K wheel loader. It includes steps for removing and installing the rear power take-off, vibration damper and pulley using various tools. Detailed illustrations accompany the multi-step procedures. Safety and installation torque specifications are provided. The document is intended as a service repair manual for technicians working on Caterpillar 992K wheel loaders.
Caterpillar cat 983 b track loader (prefix 58x) service repair manual (58x000...fjjskkemsmee
This document provides instructions for removing and installing various components of a 3406 engine fuel system for a 983B track loader. It describes removing and installing fuel valve adapters, the automatic timing advance assembly, and fuel injection lines. The procedures include draining coolant, using specialized tools to remove components, inspecting and replacing seals, and torquing fasteners to the specified values.
Caterpillar cat 966 k wheel loader (prefix tfs) service repair manual (tfs000...fjjskkemsmee
This document provides instructions for assembling and disassembling components of the steering system on a 966K wheel loader. The steps include installing bearings and seals in the piston pump, removing and installing the secondary steering pump and electric motor, removing and installing the secondary steering control valve, and disassembling the secondary steering valve. The document contains diagrams to illustrate the proper order and orientation of parts. Safety precautions are provided for spring loaded components.
Caterpillar cat 966 k wheel loader (prefix pbg) service repair manual (pbg000...fjjskkemsmee
This document provides instructions for assembling and disassembling a limited slip differential for a 966K wheel loader. It includes 15 steps for assembly, requiring various tools, and lubricating and installing each part in the correct order. It also lists 2 steps for disassembly, including marking the differential case halves and using a press to remove bolts and release spring compression safely.
Caterpillar cat 966 f wheel loader (prefix 8bg) service repair manual (8bg000...fjjskkemsmee
This document provides instructions for disassembling and assembling the torque converter of a 966F wheel loader. It describes 31 steps to disassemble the torque converter by removing components like housing bolts, gears, bearings, seals and shafts. It then describes 26 steps for reassembling the torque converter by reversing the disassembly steps and ensuring proper alignment of components. Tools required include link brackets, drivers and pliers.
Caterpillar cat 966 f wheel loader (prefix 4yg) service repair manual (4yg000...fjjskkemsmee
This document provides instructions for disassembling and assembling a limited slip differential for a 966F wheel loader. The summary is as follows:
1. The disassembly instructions describe removing components of the differential such as discs, gears, and housing pieces.
2. The assembly instructions describe cleaning and inspecting parts, applying lubricant, and reinstalling components in the reverse order of disassembly.
3. Special procedures are provided for differentials with part numbers 102-7507 and 142-0444, including measuring and adjusting the end play gap.
Caterpillar cat 966 f wheel loader (prefix 3xj) service repair manual (3xj000...fjjskkemsmee
The document provides instructions for disassembling and assembling axle shaft assemblies and brake groups for a Caterpillar 966F wheel loader. It describes removing and installing various components of the axle shaft assemblies and brake groups, including planetary carrier assemblies, axle shafts, seals, bearings, springs, and reaction plates. Detailed steps are provided for disassembling, cleaning, heating or cooling components as needed, and reassembling the axle shaft assemblies and brake groups.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train
Media Number -RENR8867-05 Publication Date -01/06/2014 Date Updated -27/06/2014
i02356369
Gear Pump (Axle Oil Cooler) - Assemble
SMCS - 5073-016-AOC
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1858 Retaining Ring Pliers 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01177117
1. Install seal (33) and backup ring (34) on bearing (31) .
1/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 2 g01177072
2. Install bearing (31) and O-ring seal (32) on body (20) .
Illustration 3 g01177071
3. Install seal (30) in flange (29) .
2/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 4 g01177070
4. Install flange (29) on body (20) .
Illustration 5 g01177069
5. Install gear (27) and shaft (28) in body (20) .
Illustration 6 g01177067
6. Use Tooling (A) to install retaining ring (26) .
7. Install key (25) .
3/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 7 g01177094
8. Install seal (23) and backup ring (24) on bearing (22) .
Illustration 8 g01177066
9. Install bearing (22) and O-ring seal (21) on body (20) .
Illustration 9 g01177064
10. Install flange (19) and coupling (18) on body (20) .
4/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 10 g01177089
11. Install seal (16) and backup ring (17) on bearing (15) .
Illustration 11 g01177063
12. Install O-ring seal (14) and bearing (15) .
5/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 12 g01177062
13. Install seal (13) in flange (12) .
Illustration 13 g01177059
14. Install flange (12) on body (11) .
Illustration 14 g01177058
15. Install gear (9) and shaft (10) in body (11) .
6/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 15 g01177057
16. Use Tooling (A) to install retaining ring (7) .
17. Install O-ring seal (8) .
Illustration 16 g01177056
18. Install seal (5) and backup ring (6) in bearing (3) .
Illustration 17 g01177055
7/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. 19. Install bearing (3) and O-ring seal (4) .
Illustration 18 g01177054
20. Install cover (2) and bolts (1) .
End By: Install the axle oil cooler pump and the clutch. Refer to Disassembly and Assembly,
"Axle Oil Cooler Pump and Clutch - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 3 10:22:31 UTC+0800 2020
8/8
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
IT62H Integrated Toolcarrier and 950H and 962H Wheel Loaders Power Train
Media Number -RENR8867-05 Publication Date -01/06/2014 Date Updated -27/06/2014
i02357021
Axle Oil Cooler Pump and Clutch - Install
SMCS - 5073-012-AOC
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
FT-1114 Vacuum Cap 1
5P-0306 Vacuum Transducer 1
6V-4142 Fitting 1
5K-5068 Fitting 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
1/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. 3. Position clutch assembly (7), bracket assembly (6), and axle oil cooler pump (5), as shown.
4. Install bolts (8) .
Illustration 4 g01177310
5. Connect harness assembly (2), tube assemblies (3), and tube assemblies (4) .
6. Install belt (1). Refer to Operation and Maintenance Manual, "Belts - Inspect / Adjust /
Replace".
Illustration 5 g01165944
7. Remove Tooling (A) from the hydraulic tank.
8. Turn the battery disconnect switch to the ON position.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 3 10:23:30 UTC+0800 2020
3/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
C7
Engines for Caterpillar Built Machines
Media Number -RENR9218-13 Publication Date -01/06/2014 Date Updated -04/06/2014
i02300738
Fuel Filter Base - Remove and Install
SMCS - 1262-010
Removal Procedure
Fuel leaked or spilled onto hot surfaces or electrical components can
cause a fire. To help prevent possible injury, turn the start switch off
when changing fuel filters or water separator elements. Clean up fuel
spills immediately.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 1 g01152090
1. Disconnect hose assembly (1) and hose assembly (3) .
2. Disconnect harness assembly (2) .
3. Remove bolts (5) and fuel filter base (4) .
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
2/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 2 g01152090
1. Position fuel filter base (4) on the engine.
2. Install bolts (5) .
3. Connect harness assembly (2) .
4. Connect hose assembly (3) and hose assembly (1) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 3 10:24:56 UTC+0800 2020
3/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
C7
Engines for Caterpillar Built Machines
Media Number -RENR9218-13 Publication Date -01/06/2014 Date Updated -04/06/2014
i06716856
Fuel Transfer Pump - Remove
SMCS - 1256-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 256-0302 Bolt 1
Start By:
a. Remove the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit
Injector Hydraulic Pump - Remove".
Note: Tooling (A) is required for replacement of the fuel transfer pump.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
1/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 1 g01123057
1. Mount the unit injector hydraulic pump in a vertical position on a work bench.
Note: Failure to maintain a vertical position results in misalignment of the internal
components.
2. Remove bolts (3).
3. Remove tie bolt (1) that is located in the top left corner of the pump first.
4. Replace tie bolt (1) with Tooling (A).
Note: Tooling (A) has an undersized bolt head. Tooling (A) will prevent the body of the
unit injector hydraulic pump from separating during service.
5. Tighten Tooling (A) to a torque of 10 N·m (89 lb in).
6. Start with tie bolt (4) in the lower left corner and remove the remainder of the bolts from
fuel transfer pump (2).
7. Remove fuel transfer pump (2).
Fri Apr 3 10:25:55 UTC+0800 2020
2/3
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
C7
Engines for Caterpillar Built Machines
Media Number -RENR9218-13 Publication Date -01/06/2014 Date Updated -04/06/2014
i06716882
Fuel Transfer Pump - Install
SMCS - 1256-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 256-0302 Bolt 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 1 g01123057
1. Position fuel transfer pump (2) on the unit injector hydraulic pump. Be sure to align the
drive tang of the fuel transfer pump to the drive slot in the end of the pump shaft.
2. Install tie bolts (4). Tighten the bolts to a snug fit.
3. Remove Tooling (A) that is located in the upper left hole and install remaining tie bolt (1) to
a snug fit.
4. Install bolts (3) for fuel transfer pump (2). Tighten the bolts to a snug fit.
5. Start in the lower left corner of the unit injector hydraulic pump and tighten tie bolts (4) to a
torque of 28 ± 2 N·m (21 ± 1 lb ft) in a crisscross pattern. Torque the bolts again.
6. Tighten bolts (3) to a torque of 8.0 ± 0.4 N·m (71 ± 4 lb in).
End By:
a. Install the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector
Hydraulic Pump - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 3 10:26:54 UTC+0800 2020
2/2
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
C7
Engines for Caterpillar Built Machines
Media Number -RENR9218-13 Publication Date -01/06/2014 Date Updated -04/06/2014
i04891950
Unit Injector - Remove
SMCS - 1290-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 367-3070 Fuel Injector Installation and Removal Tooling 1
Start By:
A. Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 1 g03007076
1. Drain the coolant, oil, and fuel from the cylinder head. Remove the oil galley plug (1) , fuel
galley plug (2) , and coolant line (3) .
Illustration 2 g03028024
2. Disconnect harness assembly (4) .
3. Remove socket head bolts (6) from unit injector (5) .
2/4
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 3 g03028041
4. Install Tooling (A) . Use Tooling (A) to remove unit injector (5) .
Note: Do not use a wire brush on the tip of the unit injector. Damage to the unit injector will
occur.
Illustration 4 g03009616
5. Remove O-ring seal (10) , O-ring seal (11) , and O-ring seal (12) from unit injector (5) .
6. Remove backup ring (8) , backup ring (9) , and backup ring (13) .
3/4
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 950H WHEEL LOADER JAD
Configuration: 950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
C7
Engines for Caterpillar Built Machines
Media Number -RENR9218-13 Publication Date -01/06/2014 Date Updated -04/06/2014
i05268572
Unit Injector - Install
SMCS - 1290-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 367-3070 Fuel Injector Installer As 1
D - Scotch Brite 1
E 149-2955 Seal Protector 1
F 149-2956 Seal Installer 1
G
1U-5718 Vacuum Pump 1
169-7372 Bottle Assembly 1
4C-4057
Clear Plastic Tubing
7.92 mm (0.312 inch) OD
1
4C-4055
Clear Plastic Tubing
6.35 mm (0.250 inch) OD
1
H 9U-5470 Reamer 1
J 4C-6161 Tube Brush 1
K 9U-6862 Tapered Brush 1
L 4C-6774 Vacuum Gun Kit 1
1/5
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. M 4C-5027 Tap Wrench 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Evacuate as much fuel and oil as possible from the cylinder head before installing the unit
injector. Several evacuations may be necessary. Use Tooling (G) to remove the fuel and oil
from the cylinder.
Note: Tooling (L) is available to clean loose material from the sleeve bore and the cylinder.
2. Clean the carbon from the sleeve, the sleeve bore, and the end of the unit injector. Clean the
carbon from the seat area that is inside of the cylinder head. A fine grade of Tooling (D) is
preferred. Clean the carbon from the cylinder head and sleeves. If the sleeve of the unit
injector has been removed from the engine, use Tooling (H) to remove the carbon. If the
sleeve of the unit injector is installed in the engine, use Tooling (J) to remove the carbon.
The following procedure is the preferred method of cleaning the sleeve bore.
Place a 38 mm (1.5 inch) square piece of Scotch Brite material on the end of Tooling (K) .
Twist Tooling (K) with Tooling (M) against the lower surface of the sleeve bore.
The surface should be cleaned until the surface is smooth and shiny. The entire sleeve bore
should be cleaned in order to remove any loose carbon particles.
Note: Tooling (L) is available to clean loose material from the sleeve bore and the cylinder.
NOTICE
The correct procedures and tooling specifications must always be used.
Failure to follow any of the procedures may result in damage,
malfunction, or possible engine failure.
NOTICE
The O-ring seals and the backup rings must be installed in the correct
orientation. Damaged seals will result in excessive oil consumption or
excessive leakage under the valve cover. Use care to prevent nicks or
damage to the seals.
2/5
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Illustration 1 g01123753
3. Lubricate O-ring seal (6) , O-ring seal (7) , O-ring seal (8) , and the sleeve bore of the unit
injector sparingly with clean engine oil.
4. Use Tooling (E) and Tooling (F) to install backup ring (4) , backup ring (5) , O-ring seal
(6) , backup ring (9) , and O-ring seal (8) .
5. Install O-ring seal (7) .
6. Lubricate the O-ring seals and the backup rings on the unit injector with clean engine oil
before installation.
Note: Proper installation of the unit injector is important. Damage to the upper high-
pressure seals can cause excessive oil leakage under the valve cover. The damage may cause
the engine not to start due to a low actuation pressure. Damage to the lower high-pressure
seals may allow high-pressure oil to leak into the fuel supply passage resulting in excessive
oil consumption.
Note: Do not hit or strike the unit injector during installation.
7. Record the serial number for the injector and the confirmation code for the injector. When a
new unit injector is installed, the E-Trim value must be programmed into the Engine
Control Module. For more information, refer to Troubleshooting, "Injector Code -
Calibrate".
3/5
950H Wheel Loader JAD00001-UP (MACHINE) POWERED BY C7 Engine(SEBP54...
2020/4/3
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...