The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. It describes:
1. Removing the pistons and connecting rods, then pushing the connecting rod and piston out of the cylinder block.
2. Removing bolts and main bearing case assemblies to access the crankshaft, which is then pulled out after aligning the journals with reliefs in the cylinder block.
3. Removing main bearings, thrust bearings, and crankshaft bearing from the crankshaft.
Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair M...tuzhiyou2
The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. Key steps include:
1. Removing the cylinder head, oil pan, pistons and connecting rods.
2. Carefully pushing the connecting rod and piston out of the cylinder bore.
3. Removing connecting rod bearings and caps, and pushing the crankshaft out of the cylinder block.
Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair M...qfyc504378
The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. Key steps include:
1. Removing the cylinder head, oil pan, pistons and connecting rods.
2. Carefully pushing the connecting rod and piston out of the cylinder bore.
3. Removing connecting rod bearings and caps, and pushing the crankshaft out of the cylinder block.
Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair M...lituo39419496
The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. Key steps include:
1. Removing the cylinder head, oil pan, pistons and connecting rods.
2. Carefully pushing the connecting rod and piston out of the cylinder bore.
3. Removing connecting rod bearings and caps, and pushing the crankshaft out of the cylinder block.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fikskkdmmd1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...jdjkskmikdkmd
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...paws21610697
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...cdfvvv1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...uddksemd8ud
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair M...tuzhiyou2
The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. Key steps include:
1. Removing the cylinder head, oil pan, pistons and connecting rods.
2. Carefully pushing the connecting rod and piston out of the cylinder bore.
3. Removing connecting rod bearings and caps, and pushing the crankshaft out of the cylinder block.
Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair M...qfyc504378
The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. Key steps include:
1. Removing the cylinder head, oil pan, pistons and connecting rods.
2. Carefully pushing the connecting rod and piston out of the cylinder bore.
3. Removing connecting rod bearings and caps, and pushing the crankshaft out of the cylinder block.
Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair M...lituo39419496
The document provides instructions for removing and installing pistons, connecting rods, and the crankshaft on a Caterpillar C2.4 engine. Key steps include:
1. Removing the cylinder head, oil pan, pistons and connecting rods.
2. Carefully pushing the connecting rod and piston out of the cylinder bore.
3. Removing connecting rod bearings and caps, and pushing the crankshaft out of the cylinder block.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fikskkdmmd1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...jdjkskmikdkmd
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...paws21610697
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...cdfvvv1
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...uddksemd8ud
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f7djidksmd3e
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...yan77xunhao
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f8usiedkdmm
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fjskekfseik
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The steps include draining fluids, removing fasteners and components, cleaning parts, applying sealant or lubricant, and reinstalling components in the reverse order of removal while maintaining proper alignment and torque specifications.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...gongfuao7509
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The document includes diagrams and step-by-step instructions and notes on tools needed and proper torque specifications.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...yu5676962
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The instructions include diagrams illustrating the procedure steps and lists of required tools. Safety notices are also provided throughout.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...tengtui535
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The document includes diagrams and step-by-step instructions and notes on tools needed and proper procedure.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...ze6074xunong
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters.
- Removing and installing the camshaft gear.
- Removing and installing the engine oil pan.
- Removing and installing the pistons and connecting rods.
The procedures provide illustrations and specify required tools and torque values where applicable. Safety notices are also included.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters.
- Removing and installing the camshaft gear.
- Removing and installing the engine oil pan.
- Removing and installing the pistons and connecting rods.
The procedures provide illustrations and specify required tools and torque values where applicable. Safety notices are also included.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...f8seodkdmdmed3
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The document includes diagrams and step-by-step instructions and notes on tools needed and proper procedure.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...yfjskemdmdm
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...f8usejdkdm3ed
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include using various tools and following steps like aligning timing marks, holding up valve lifters, applying sealant and torque specifications.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...mbk336997
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...fsejkddmmdmd
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...jdksmemd1
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar cat 306 e mini hydraulic excavator (prefix fhl) service repair ma...fujsjefjkskeksmem
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include a list of required tools and step-by-step instructions describing how to remove, inspect, and install each part in reverse order of removal while following proper safety practices.
Caterpillar cat 306 e mini hydraulic excavator (prefix fhl) service repair ma...fisekksemm
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including the camshaft, camshaft gear, engine oil pan, pistons, and connecting rods. The procedures include a list of required tools and step-by-step instructions describing how to remove, inspect, and install each part in reverse order of removal while taking appropriate safety precautions. Torque specifications are provided where applicable.
Caterpillar cat 306 e mini hydraulic excavator (prefix fhl) service repair ma...fjsekksemfmm
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include a list of required tools and step-by-step instructions describing how to remove, inspect, and install each part in reverse order of removal while following proper safety practices.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...hvy7sbkw8e
This document provides instructions for removing and installing various engine components on a Caterpillar 306E Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and related components. The procedures include using various specialized tools and following steps such as draining fluids, aligning marks, applying sealants, and torquing bolts to specified values. Safety notices are provided to take precautions when handling fluids and to avoid damaging parts.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...xiapokang564341
This document provides instructions for removing and installing various engine components on a Caterpillar 306E Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and related components. The procedures include using various specialized tools and following steps such as draining fluids, aligning marks, applying sealants, and torquing bolts to specified values. Safety notices are provided to take precautions when handling fluids and to avoid damaging parts.
Caterpillar Cat 390F L Excavator (Prefix MGF) Service Repair Manual (MGF00001...uddksemd8ud
This document provides instructions for disassembling and assembling the travel motor on a 390F L Excavator. It describes 40 steps to disassemble the various components of the travel motor including removing seals, springs, pistons, plates, and bearings. It then describes the assembly process in reverse, providing details on cleaning parts and applying lubricant before reinstalling components in the proper order and orientation.
The document provides instructions for removing and installing a piston pump used for hoist and steering functions on a Caterpillar 725C articulated truck. The removal process involves taking off the cab, then disconnecting hydraulic lines and electrical connectors from the pump. Individual components are then removed from the pump housing in reverse order of the installation instructions. Proper safety precautions and cleaning of parts is emphasized during disassembly and reassembly.
More Related Content
Similar to Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair Manual (FXT00001 and up).pdf
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f7djidksmd3e
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...yan77xunhao
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety and cleaning notices are also provided throughout.
Caterpillar Cat 305.5E2CR Mini Hydraulic Excavator (Prefix HRX) Service Repai...f8usiedkdmm
The document provides instructions for servicing components of a Caterpillar 305.5E2CR mini hydraulic excavator engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling and assembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations.
Caterpillar cat 305.5 e2cr mini hydraulic excavator (prefix hrx) service repa...fjskekfseik
The document provides instructions for removing and installing various engine components on a Caterpillar 305.5E2CR Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The steps include draining fluids, removing fasteners and components, cleaning parts, applying sealant or lubricant, and reinstalling components in the reverse order of removal while maintaining proper alignment and torque specifications.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...gongfuao7509
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The document includes diagrams and step-by-step instructions and notes on tools needed and proper torque specifications.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...yu5676962
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The instructions include diagrams illustrating the procedure steps and lists of required tools. Safety notices are also provided throughout.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...tengtui535
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The document includes diagrams and step-by-step instructions and notes on tools needed and proper procedure.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...ze6074xunong
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters.
- Removing and installing the camshaft gear.
- Removing and installing the engine oil pan.
- Removing and installing the pistons and connecting rods.
The procedures provide illustrations and specify required tools and torque values where applicable. Safety notices are also included.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...f8usejkdmmd8i
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters.
- Removing and installing the camshaft gear.
- Removing and installing the engine oil pan.
- Removing and installing the pistons and connecting rods.
The procedures provide illustrations and specify required tools and torque values where applicable. Safety notices are also included.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...f8seodkdmdmed3
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including:
- Removing and installing the camshaft and valve lifters
- Removing and installing the camshaft gear
- Removing and installing the engine oil pan
- Removing and installing the pistons and connecting rods
- Disassembling the pistons and connecting rods
The document includes diagrams and step-by-step instructions and notes on tools needed and proper procedure.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...yfjskemdmdm
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...f8usejdkdm3ed
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include using various tools and following steps like aligning timing marks, holding up valve lifters, applying sealant and torque specifications.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...mbk336997
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...fsejkddmmdmd
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...jdksmemd1
This document provides instructions for disassembling and assembling components of a Caterpillar C2.6 engine, including removing and installing the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include lists of required tools and step-by-step instructions with illustrations for each component. Safety notices are included to take precautions when handling parts and fluids.
Caterpillar cat 306 e mini hydraulic excavator (prefix fhl) service repair ma...fujsjefjkskeksmem
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include a list of required tools and step-by-step instructions describing how to remove, inspect, and install each part in reverse order of removal while following proper safety practices.
Caterpillar cat 306 e mini hydraulic excavator (prefix fhl) service repair ma...fisekksemm
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including the camshaft, camshaft gear, engine oil pan, pistons, and connecting rods. The procedures include a list of required tools and step-by-step instructions describing how to remove, inspect, and install each part in reverse order of removal while taking appropriate safety precautions. Torque specifications are provided where applicable.
Caterpillar cat 306 e mini hydraulic excavator (prefix fhl) service repair ma...fjsekksemfmm
This document provides instructions for removing and installing various engine components on a 306E Mini Hydraulic Excavator including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and disassembling the pistons and connecting rods. The procedures include a list of required tools and step-by-step instructions describing how to remove, inspect, and install each part in reverse order of removal while following proper safety practices.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...hvy7sbkw8e
This document provides instructions for removing and installing various engine components on a Caterpillar 306E Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and related components. The procedures include using various specialized tools and following steps such as draining fluids, aligning marks, applying sealants, and torquing bolts to specified values. Safety notices are provided to take precautions when handling fluids and to avoid damaging parts.
Caterpillar Cat 306E Mini Hydraulic Excavator (Prefix FHL) Service Repair Man...xiapokang564341
This document provides instructions for removing and installing various engine components on a Caterpillar 306E Mini Hydraulic Excavator, including the camshaft, camshaft gear, engine oil pan, pistons, connecting rods, and related components. The procedures include using various specialized tools and following steps such as draining fluids, aligning marks, applying sealants, and torquing bolts to specified values. Safety notices are provided to take precautions when handling fluids and to avoid damaging parts.
Similar to Caterpillar Cat 304.5E Mini Hydraulic Excavator (Prefix FXT) Service Repair Manual (FXT00001 and up).pdf (20)
Caterpillar Cat 390F L Excavator (Prefix MGF) Service Repair Manual (MGF00001...uddksemd8ud
This document provides instructions for disassembling and assembling the travel motor on a 390F L Excavator. It describes 40 steps to disassemble the various components of the travel motor including removing seals, springs, pistons, plates, and bearings. It then describes the assembly process in reverse, providing details on cleaning parts and applying lubricant before reinstalling components in the proper order and orientation.
The document provides instructions for removing and installing a piston pump used for hoist and steering functions on a Caterpillar 725C articulated truck. The removal process involves taking off the cab, then disconnecting hydraulic lines and electrical connectors from the pump. Individual components are then removed from the pump housing in reverse order of the installation instructions. Proper safety precautions and cleaning of parts is emphasized during disassembly and reassembly.
The document provides instructions for disassembling and assembling the freewheel stator of a torque converter. It lists 35 steps for disassembly, removing components like bolts, valves, sensors, gears, bearings and seals. It then lists 29 steps for assembly, installing these components in reverse order. Cleanliness is emphasized throughout to prevent dirt from entering components. Various tools are required, including link brackets, eyebolts and retaining ring pliers.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...uddksemd8ud
This document provides instructions for disassembling and assembling the travel motor on a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the correct order and orientation, with notes about cleaning, marking, and applying lubricant to parts. Precautions are provided regarding spring-loaded components.
Caterpillar Cat 390F L Excavator (Prefix TYE) Service Repair Manual (TYE00001...uddksemd8ud
This document provides instructions for disassembling and assembling the travel motor of a 390F L Excavator. It describes 40 steps for disassembly, including removing covers, pistons, springs, seals and other components. It then describes 36 steps for reassembly, including installing seals, bearings, pistons, springs and covers. Precise alignment marks are required for accurate reassembly. Cleanliness is critical and tools are needed to remove and install certain parts.
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
Caterpillar Cat 365B L MH EXCAVATOR (Prefix CTY) Service Repair Manual (CTY00...uddksemd8ud
This document provides assembly instructions for a final drive in 29 steps. It lists required tools and parts. Key steps include: installing bearings and seals; determining bearing preload using shims; assembling carrier assemblies with planetary gears; and installing ring gears, covers, and bolts. Proper cleaning, lubrication and torque specifications are noted throughout assembly.
The document provides instructions for removing and installing a cylinder head on a Caterpillar 3176C engine. It describes removing components like sensors, tubes, and manifolds. It instructs to clean mating surfaces and inspect for damage. The correct cylinder head gasket must be installed along with new seals. Bolts are tightened in a specific sequence to the proper torques. Removed components are reinstalled in reverse order.
This document provides instructions for disassembling and assembling the travel motor on a 352F excavator. The disassembly procedure involves removing 17 components from the travel motor housing including the head assembly, brake housing, rotating group, barrel assembly, pistons, and bearings. The assembly procedure instructs installing the components in reverse order.
Caterpillar Cat 345C L Mobile Hydraulic Excavator (Prefix M3E) Service Repair...uddksemd8ud
The document provides instructions for disassembling and assembling a travel motor. Key steps include removing the head, brake piston, rotating group, and seals. Components must be cleaned and any worn parts replaced with new ones. Proper identification and orientation of parts is important for correct reassembly, which involves installing seals, spacers, pistons and other components in the correct order. Contamination of hydraulic systems must be avoided during the process.
This document provides instructions for disassembling and assembling the travel motor of a 336E excavator. The disassembly process involves removing 27 different components of the travel motor including the head, springs, brake piston, plates, and seals. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts. Tools such as an eyebolt, retaining ring pliers, and bearing puller are required to complete the process.
The document provides instructions to remove the rear power take-off (RPTO) from a Caterpillar C9.3 engine. The steps are:
1. Remove the flywheel housing to access the RPTO.
2. Disconnect the drive shaft from the RPTO and remove retaining bolts.
3. Lift the RPTO straight up to remove.
Caterpillar Cat 340F L LRE Excavator (Prefix YBF) Service Repair Manual (YBF0...uddksemd8ud
This document provides the disassembly and assembly procedures for the travel motor on a 340F L LRE excavator. It includes 27 steps to disassemble the travel motor by removing components like the head, springs, plates, seals and bearings. The 27 steps to assemble list installing these same components in reverse order and include notes about lubrication, alignment and torque specifications. Required tools are listed for both procedures.
The document provides instructions for disassembling a piston motor (hydraulic fan) with the following key steps:
1. Remove the head and internal components like seals, plates, and bearings.
2. Extract the pistons, retainer, and bearings from the housing.
3. Use specialty tools to remove the retaining ring and springs, allowing removal of the swashplate and shaft.
Proper safety precautions and cleaning of parts is emphasized before disassembly.
The document provides instructions for removing and installing an engine oil filter base on a 336D LN excavator. It describes:
1) Removing various connectors, seals, valves, and plugs from the engine oil filter base during disassembly.
2) Assembling the engine oil filter base by installing plugs, seals, valves, and connectors in reverse order of removal.
3) Installing the engine oil filter base on the engine using guide studs and bolts, and reconnecting hoses.
The document provides instructions for installing a fuel injection pump on a Caterpillar 330 excavator engine:
1. Install alignment tools and spacers to hold the fuel injection pump and rack in position. Lubricate seals and install the pump, securing it with a bushing.
2. Use a measurement tool to check that the rack has the proper travel of 15.70 mm after installation.
3. Repeat the process to install the remaining fuel injection pumps and reinstall the cover.
The document provides instructions for installing a cylinder head on a Caterpillar 330 excavator engine. It describes:
1. Cleaning the cylinder head and ensuring it is free of contaminants before installation.
2. Attaching the cylinder head to the cylinder block using bolts in the specified tightening sequence and torque.
3. Reinstalling related components like the exhaust manifold, fuel injection lines, and valve train once the cylinder head is secured.
The summary highlights the key steps of cleaning the cylinder head, attaching it to the engine block, and reinstalling additional parts. It is provided in 3 sentences as requested.
Caterpillar Cat 330D N Hydraulic Excavator (Prefix RAS) Service Repair Manual...uddksemd8ud
The document provides instructions for removing and disassembling the swivel component of a 330D L hydraulic excavator. It lists required tools and outlines a 15 step procedure for removing the swivel that includes disconnecting hydraulic lines, removing bolts and other fasteners, and using lifting devices. A 7 step procedure is then given for disassembling the swivel once it is removed, which involves cleaning it, positioning it on a repair stand, and separating its outer housing from the rotor using bolts and other tools.
Caterpillar Cat 330D L Hydraulic Excavator (Prefix RAS) Service Repair Manual...uddksemd8ud
The document provides instructions for removing and disassembling the swivel component of a 330D L hydraulic excavator. It begins with preparing the hydraulic system by releasing pressure and applying vacuum. The swivel is then removed by disconnecting hoses, removing bolts and lifting it off. For disassembly, the swivel is cleaned and secured on a repair stand. Bolts, seals and housing components are then removed to separate the rotor from the outside housing.
1) The document provides step-by-step instructions for disassembling and assembling the travel motor of a 330C MH excavator.
2) It lists 28 steps for disassembly, including removing the head, brake piston, plates and discs, seals, and other components.
3) It then lists 28 steps for assembly in reverse order, providing details on installing components and applying sealant or lubricant.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 304.5E2 MINI HYD EXCAVATOR FXT
Configuration: 304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06547479
Piston and Connecting Rods - Remove and Install
SMCS - 1225-010
Removal Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 456-7967 Piston ring compressor 1
Start By:
a. Remove cylinder head.
b. Remove oil pan.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Discard all used Connecting Rod fasteners.
1/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g06015326
1. Remove bolts (1) and connecting rod cap (2).
Illustration 2 g06015587
2. Carefully push connecting rod (3) and the piston into the cylinder bore until they are clear of
the crankshaft and out of the cylinder block.
Note: The connecting rod and the connecting rod cap should have an etched Number (X) on
the side. The number on the connecting rod and the connecting rod cap must match. Make a
temporary mark on the connecting rod and the connecting rod cap to identify the cylinder
number.
2/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g06015618
3. Remove connecting rod bearings (4).
4. Repeat Step 1 through Step 3 for remaining pistons and connecting rods.
Installation Procedure
1. Install the connecting rods and the pistons in the reverse order of removal.
Note: Ensure that the piston and the connecting rod assembly are installed in the correct
cylinder.
Illustration 4 g02840445
a. The mark (5A) on the connecting rod must align with the fuel pump. Mark (1A) on
the piston must align with the flywheel.
b. Lubricate connecting rod bearings with clean engine oil.
Note: Install the bearing shells for the connecting rods dry when clearance checks are
performed. Refer to Disassembly and Assembly, "Bearing Clearance - Check" for the
correct procedure. Apply clean engine oil to the bearing shells for the connecting rods
during final assembly.
c. Install connecting rod bearings (4) with locating tabs correctly seated into slots.
3/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g06015708
d. Use Tooling (A) to install the piston and connecting rod assembly.
Note: Apply clean engine oil to the cylinder bore, to the piston rings and to the outer
surface of the piston
e. Install new bolts (1) to the connecting rod (3). Apply clean engine oil to the threads of
bolts (1) and tighten to a torque of 40 N·m to 45 N·m (30 lb ft to 33 lb ft).
Note: Ensure that the installed connecting rod assembly has side play. Rotate the
crankshaft to ensure that there is no binding.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 21 00:04:58 UTC+0800 2020
4/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 304.5E2 MINI HYD EXCAVATOR FXT
Configuration: 304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06547693
Pistons and Connecting Rods - Disassemble
SMCS - 1225-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-6683 Ring Expander 1
B 387-1313 Piston Wrist Pin Tool 1
Start By:
a. Remove the pistons and the connecting rods.
Note: Make a temporary mark on the components of the piston and connecting rod assembly.
Marking the components will ensure that the components of each piston and connecting rod
assembly can be reinstalled in the original cylinder. Mark the underside of the piston on the front
pin boss. Do not interchange components.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 1 g02723365
Illustration 2 g02723368
1. Position the piston and connecting rod in a soft jaw vise. Use Tooling (A) to remove three
rings (2) from piston (1).
Illustration 3 g02723373
2/3
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 4 g02723375
2. Remove retaining ring (4) and remove piston wrist pin (3) from piston (1).
Note: Note the position of the forged mark on the piston and the marks on the rod. The
forged marks are for the purposes of correct orientation of the connecting rod assembly and
piston assembly.
3. If necessary, remove bolts (7) and connecting rod bearings (6) from connecting rod (5) and
connecting rod cap (8). Inspect connecting rod bushing (9).
Illustration 5 g02836798
4. Place the piston on a suitable surface with the crown upward. Use Tooling (B) to remove
connecting rod bushing (9) from connecting rod (5).
5. Inspect the connecting rod for wear and damage. If necessary, replace connecting rod (5) or
replace the connecting rod bushing (9).
Note: If the connecting rod or the bush for the piston pin are replaced, refer to
Specifications, "Connecting Rods" for the correct procedure.
6. Repeat Step 1 through Step 5 to disassemble the remaining pistons and connecting rods.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 21 00:05:55 UTC+0800 2020
3/3
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 304.5E2 MINI HYD EXCAVATOR FXT
Configuration: 304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06547702
Pistons and Connecting Rods - Assemble
SMCS - 1225-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-6683 Ring Expander 1
B 387-1313 Piston Wrist Pin Tool 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that all components are clean and free from wear and damage. If necessary, replace
any components that are worn or damaged.
1/5
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 1 g02836831
2. Inspect the connecting rod for wear and damage. If necessary, replace connecting rod (5) or
replace connecting rod bushing (9).
Note: If connecting rod (5) or the bushing (9) for connecting rod pin are replaced, refer to
Specifications, "Connecting Rods" for the correct procedure.
3. Place the piston on a suitable surface with the crown upward. Use Tooling (B) to install
connecting rod bushing (9) into connecting rod (5).
Illustration 2 g02723373
Illustration 3 g02723375
2/5
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 4. Check connecting rod bushing (9). If necessary, install connecting rod bearings (6) into
connecting rod (5) and connecting rod cap (8). Inspect bolts (7) or replace with new for
assembly later.
5. Lubricate the bore for the piston wrist pin (3) with clean engine oil.
Illustration 4 g02840445
6. Place piston (1) on a suitable surface with the crown downward. Position connecting rod (5)
with the forged markings on the piston and connecting rod in the correct orientation.
Note: The mark (5A) on the connecting rod (5) must align with the fuel pump. Mark (1A)
on the piston (1) must align with the flywheel.
7. Install piston wrist pin (3) into piston (1). Install retaining ring (4).
Illustration 5 g02723365
3/5
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 6 g02723368
8. Position the connecting rod and piston (1) into a soft jaw vise. Use Tooling (A) to install
three rings (2) onto piston (1).
Illustration 7 g06045622
9. If the original piston is assembled, follow Step 9.a through Step 9.e to install the piston
rings.
a. Position the spring for the oil control ring into the oil ring groove in piston (1). The
central wire must be located inside the end of the spring.
b. Position the oil control ring with the manufacturing mark in the upward position as
shown in Illustration 7. Use Tooling (A) to install over the piston and the spring.
Note: Ensure that the central wire is 180 degrees from the ring gap.
c. Use Tooling (A) to install the intermediate compression ring into the second groove
in piston (1). The manufacturing mark must be upward. The chamfer on the inner face
must be downward.
d. Use Tooling (A) to install top the compression ring into the top groove in piston (1).
The manufacturing mark must be upward.
e. Position piston ring (2) gaps at 120 degrees away from each other.
10. Repeat Step 2 through Step 9.e for the remaining piston and connecting rod assemblies.
4/5
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. End By:
a. Install the pistons and the connecting rods.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 21 00:06:51 UTC+0800 2020
5/5
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 304.5E2 MINI HYD EXCAVATOR FXT
Configuration: 304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06543010
Crankshaft - Remove
SMCS - 1202-011
Removal Procedure
Start By:
a. Remove pistons and connecting rods.
NOTICE
If the crankshaft has been reground or replaced, the height of the
piston above the cylinder block must be inspected. It is necessary to
remove the cylinder head to inspect the height of the piston above the
cylinder block.
Note: Before you disassemble, measure the side clearance of the crankshaft. Measure it when you
reassemble.
1/3
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g06016404
1. Remove bolts (1).
Illustration 2 g06016439
2. Rotate crankshaft (2) and align the crankshaft journals with the reliefs (X) in the Cylinder
Block. Use two people to pull the crankshaft out of the cylinder block. The weight of
crankshaft (2) is approximately 24 kg (53 lb).
Illustration 3 g06016479
3. Remove bolts (3) and main bearing case assemblies (4).
2/3
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 4 g06016876
4. Remove main bearings (6) and thrust bearings (5).
Illustration 5 g06016885
5. Remove crankshaft bearing (7).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 21 00:07:48 UTC+0800 2020
3/3
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 304.5E2 MINI HYD EXCAVATOR FXT
Configuration: 304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06544622
Crankshaft - Install
SMCS - 1202-012
Installation Procedure
1. Refer to Specifications, "Crankshaft" for more information. If necessary, replace the
crankshaft or recondition the crankshaft.
2. Ensure that the parent bores for the crankshaft bearings in the cylinder block are clean.
Ensure that the threads for the bearing bolts in the cylinder block are clean and free from
damage.
3. Clean the crankshaft bearings and the thrust washers. Inspect the bearings and the thrust
washers for wear or damage. If necessary, replace the bearings and the thrust washers.
Note: If the crankshaft bearings are replaced, check whether oversize bearings were
previously installed. If the thrust washers are replaced, check whether oversize thrust
washers were previously installed.
4. Ensure that all the lubrication passages are clean and free of debris.
Illustration 1 g06016885
1/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 5. Install crankshaft bearing. (7).
Illustration 2 g06016931
6. When you install the main bearing case assemblies, point the mark FLYWHEEL (Y) to the
flywheel.
Illustration 3 g06016876
2/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Illustration 4 g06045656
7. Install main bearings (6) and thrust bearings (5)
Note: When you install thrust bearings (5) point the oil grooves externally.
Illustration 5 g06016479
8. Install main bearing case assemblies (4) and bolts (3). Tighten bolts (3) to a torque of
46 N·m to 50 N·m (34 lb ft to 37 lb ft).
Note: Install the main bearing case assemblies (4) in the initial positions. Since the
diameters of the main bearing case assemblies are different, install them in the sequence of
their marks on the gear case side.
3/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 6 g06016404
Illustration 7 g06016439
9. Rotate crankshaft (2) and align the crankshaft journals with the reliefs (X) in the Cylinder
Block. Use two people to install the crankshaft into the cylinder block. The weight of
crankshaft (2) is approximately 24 kg (53 lb).
10. Tighten bolts (1) to a torque of 69 N·m to 73 N·m (51 lb ft to 54 lb ft).
11. Check the crankshaft end play, side clearance, and oil clearance. Refer to Specifications,
"Crankshaft" for more information.
12. Check the piston height. Refer to Systems Operation, Testing and Adjusting, "Piston Height
- Inspect" for more information.
End By:
a. Install pistons and connecting rods.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 21 00:08:45 UTC+0800 2020
4/4
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 304.5E2 MINI HYD EXCAVATOR FXT
Configuration: 304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4
Disassembly and Assembly
C2.4 Tier 4 Final Engines for Caterpillar Built Machines
Media Number -UENR7319-02 Publication Date -01/07/2018 Date Updated -01/08/2018
i06541555
Crankshaft Gear - Remove and Install
SMCS - 1204-010-GE
Removal Procedure
Table 1
Required Tooling
Tool Part Number Part Description Qty
A 1P-2321 Puller Assembly 1
Start By:
a. Remove idler gear.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2
304.5E Mini Hydraulic Excavator FXT00001-UP (MACHINE) POWERED BY C2.4(...
2020/2/21
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...