Carpentry joints are where two pieces of wood meet. Carpenters and cabinetmakers carefully craft joints to be precise and unnoticeable. Common joints are chosen based on the wood type and intended use of the final product.
This document discusses conventional construction materials, focusing on timber. It defines timber as wood suitable for construction purposes and notes it can be seasoned and preserved before use. Timber is classified as either hard wood from deciduous broad-leaf trees like teak, sal, and shisham, or soft wood from coniferous needle-leaf trees like deodar, pine, and kail. The document provides an introduction to additive construction methods using concrete but focuses most on describing timber and how it is classified.
This document discusses various types of timber used in construction. It begins by defining timber and its uses in construction. It then discusses classifications of timber into hardwood and softwood. Specific timber types discussed include bamboo, birch, cedar, cherry, mahogany, oak, and fir. For each timber, its characteristics, advantages and disadvantages for construction are provided.
One traditional definition of carpentry is “the art or science of cutting, fitting, and assembling wood or related material in the construction of buildings and other structures.”
This document provides information about various types of timber and timber products. It begins by listing various types of trees and their characteristics, locations found, and common uses. It then describes different timber products including plywood, laminates, veneers, blockboards, particle boards, and fiber boards. For each product, it discusses the manufacturing process, types, properties, advantages, disadvantages, and market rates. The document provides a detailed overview of different timber sources and products used in interior design and construction.
This document discusses timber construction in Malaysia. It notes that while timber is a traditional building material, its usage has been limited in Malaysia due to prejudices and regulations classifying timber as temporary. However, timber has advantages as a structural material due to its strength to weight ratio and ability to withstand shocks and vibrations. The document outlines different timber strength groups and notes that larger timber has higher fire resistance. While combustion and insect/termite attacks are disadvantages, timber is an environmentally friendly option for floors, walls, ceilings, roofs, and other building elements.
This document describes several common types of wood joints:
Dowel joints use dowels inserted into drilled holes for strength. Dado joints cut away wood to hold shelves without fasteners. Rabbet joints cut wood at specific lengths then glue them together. Lap joints overlap cut wood and glue or nail them together. Dovetail joints cut interlocking wood shapes to join drawers strongly. Mortise and tenon joints cut a tenon that inserts into a mortise for a very strong connection. Miter joints at corners can be strengthened with hidden wood splines. Tongue and groove joints insert a tongue into a groove to join flooring or panels edge to edge into a flat surface.
The document discusses various carpentry tools and wood joints. It provides details on 8 common tools: try square, steel rule, marking gauge, coping saw, tenon saw, panel saw, ironjack plane, and bench vice. It describes what each tool is used for and key features. The document also briefly explains two types of wood joints - the lap joint and mortise & tenon joint. It notes the mortise & tenon joint is very strong and often used in leg and rail construction.
This document discusses conventional construction materials, focusing on timber. It defines timber as wood suitable for construction purposes and notes it can be seasoned and preserved before use. Timber is classified as either hard wood from deciduous broad-leaf trees like teak, sal, and shisham, or soft wood from coniferous needle-leaf trees like deodar, pine, and kail. The document provides an introduction to additive construction methods using concrete but focuses most on describing timber and how it is classified.
This document discusses various types of timber used in construction. It begins by defining timber and its uses in construction. It then discusses classifications of timber into hardwood and softwood. Specific timber types discussed include bamboo, birch, cedar, cherry, mahogany, oak, and fir. For each timber, its characteristics, advantages and disadvantages for construction are provided.
One traditional definition of carpentry is “the art or science of cutting, fitting, and assembling wood or related material in the construction of buildings and other structures.”
This document provides information about various types of timber and timber products. It begins by listing various types of trees and their characteristics, locations found, and common uses. It then describes different timber products including plywood, laminates, veneers, blockboards, particle boards, and fiber boards. For each product, it discusses the manufacturing process, types, properties, advantages, disadvantages, and market rates. The document provides a detailed overview of different timber sources and products used in interior design and construction.
This document discusses timber construction in Malaysia. It notes that while timber is a traditional building material, its usage has been limited in Malaysia due to prejudices and regulations classifying timber as temporary. However, timber has advantages as a structural material due to its strength to weight ratio and ability to withstand shocks and vibrations. The document outlines different timber strength groups and notes that larger timber has higher fire resistance. While combustion and insect/termite attacks are disadvantages, timber is an environmentally friendly option for floors, walls, ceilings, roofs, and other building elements.
This document describes several common types of wood joints:
Dowel joints use dowels inserted into drilled holes for strength. Dado joints cut away wood to hold shelves without fasteners. Rabbet joints cut wood at specific lengths then glue them together. Lap joints overlap cut wood and glue or nail them together. Dovetail joints cut interlocking wood shapes to join drawers strongly. Mortise and tenon joints cut a tenon that inserts into a mortise for a very strong connection. Miter joints at corners can be strengthened with hidden wood splines. Tongue and groove joints insert a tongue into a groove to join flooring or panels edge to edge into a flat surface.
The document discusses various carpentry tools and wood joints. It provides details on 8 common tools: try square, steel rule, marking gauge, coping saw, tenon saw, panel saw, ironjack plane, and bench vice. It describes what each tool is used for and key features. The document also briefly explains two types of wood joints - the lap joint and mortise & tenon joint. It notes the mortise & tenon joint is very strong and often used in leg and rail construction.
Bearing joints are used at right angles where two members meet to provide strength. Various bearing joints are described including the chase-mortise joint, cogged joint, double tenon joint, dovetailed joint, halved joint, housed joint, and joggle tenon joint. The most common bearing joint is the mortise and tenon joint, which involves cutting a tenon on one member that fits into a corresponding mortise cut into the other member. Other joints like the notched joint, tusk-tenon joint, and oblique shouldered joints are used when members meet at obtuse or acute angles.
This document discusses different types of wood joints used in furniture and woodworking. It describes various butt, edge, halving, housing, bridle, finger, mortise and tenon, dovetail, screw, plug, block, mitre, and dowel joints. Each joint type has different strengths and suitable applications. The document provides examples of describing suitable joints for joining furniture parts like table rails and legs or shelf units. It also includes a quiz to test the reader's knowledge of different joint names and parts.
This document discusses various topics related to woodworking and carpentry. It defines key terms like board foot, which is a unit used to measure lumber. It also lists common woodworking tools categorized into testing tools, marking tools, holding tools, cutting tools, smooth facing tools, boring tools, and fastening tools. Additionally, it explains different types of wood joints like mortise joints, tenon joints, and dovetail joints which involve fitting pieces of wood together.
Holding a bachelor’s degree in chemical engineering and an MBA from the University of California, Davis, Craig William Taylor currently serves as a group leader and senior engineer for Genentech, Inc. When he’s not busy with work, Craig William Taylor enjoys a variety of hobbies, including woodworking.
Health Benefits of Gardens in Hospitals
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children =
http://scribd.com/doc/239851214 ~
`
Double Food Production from your School Garden with Organic Tech =
http://scribd.com/doc/239851079 ~
`
Free School Gardening Art Posters =
http://scribd.com/doc/239851159 ~
`
Increase Food Production with Companion Planting in your School Garden =
http://scribd.com/doc/239851159 ~
`
Healthy Foods Dramatically Improves Student Academic Success =
http://scribd.com/doc/239851348 ~
`
City Chickens for your Organic School Garden =
http://scribd.com/doc/239850440 ~
`
Simple Square Foot Gardening for Schools - Teacher Guide =
http://scribd.com/doc/239851110 ~
This document discusses defining projects and improving project definition processes. It proposes that projects should be carefully planned to achieve business goals and benefits, not just delivery. It presents a framework for understanding the project definition lifecycle and identifies questions around typical reactive approaches. The document concludes that formulating projects based on clear rationale and realistic assumptions is important, and evolving processes and culture can help drive improvements like maintaining a strategic roadmap and fully understanding project context.
This document discusses different types of wood joints used in carpentry and woodworking. It provides information on various carcase joints like butt joints, rebate and butt joints, mitre joints, and dovetail joints. It also discusses housing joints, framing joints, mortise and tenon joints, widening joints, biscuit joints, and knock down fittings. The document includes diagrams to illustrate the different joints and their applications.
The document discusses the physical components of open spaces, including walls, floors, roofs, and furniture. It describes walls as defining the shape and size of a space and directing movement. Floors can be flat, multi-level, or made of different materials depending on the space's use. Roofs are usually the sky but may be covered. Furniture includes hardscape elements like lighting, signs, sculptures, and fountains as well as softscape elements like trees and plants, which provide shade, act as landmarks, and direct movement and vision.
Blue Thumb is a Michigan-based company that manufactures and distributes water feature equipment and supplies. It was founded in 2000 and has since expanded from a 3,200 square foot space to over 50,000 square feet. The presentation discusses the history of water features from ancient times to modern day and how their design has evolved. It also provides an overview of different types of water features including koi ponds, water gardens, fountains, and wetlands. The role of plants and other natural elements in successful water feature design is emphasized.
The document discusses different types of doors and windows. It describes doors in terms of their components, sizes, frames, types and materials. The main types of doors covered are paneled doors, glazed doors, flush doors, louvered doors, revolving doors, sliding doors, swing doors and collapsible doors. It also discusses different types of windows like fixed windows. Rolling shutters are described as curtain-like doors made of thin steel sheets used for shops and warehouses. The document provides detailed information on specifications and uses of different door and window components.
This document discusses various wall finishes and patterns. It describes different types of finishes like cement textured, plastered, wood panels, and plywood that can be used on walls. It also discusses plaster finishes like plaster of Paris and gypsum plaster. Other finishes mentioned include laminate, marble powder, wallpapers, fabrics, and cork. The document also covers decorative paint techniques like transparent layers, trompe l'oeil, stenciling, and distressing. Finally, it summarizes mosaics, murals, graffiti style murals, and tile murals as wall covering options.
This document discusses various types of acoustical materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common sound absorbing materials like acoustical foam panels, fabric-wrapped panels, wall coverings, ceiling tiles, and baffles. These materials use porous materials like foam, fiberglass, and fabrics to absorb sound waves. The document also briefly mentions sound diffusers which scatter sound reflections instead of absorbing them.
The document discusses various aspects of project management. It begins by outlining the different stages of a project including planning and scheduling, data collection, status updates, and ensuring successful completion. It then defines what a project is, its key characteristics, and how project management applies knowledge and techniques to meet stakeholder needs and expectations. The document also discusses why companies and individuals use project management and what goes into a project management plan. It provides overviews of the project management process, process groups, knowledge areas, and integration management.
Value based approach to heritae conservation -.docxJIT KUMAR GUPTA
Text defines the role, importance and relevance of value based approach in identification, preservation and conservation of heritage to make it more productive and community centric.
Bearing joints are used at right angles where two members meet to provide strength. Various bearing joints are described including the chase-mortise joint, cogged joint, double tenon joint, dovetailed joint, halved joint, housed joint, and joggle tenon joint. The most common bearing joint is the mortise and tenon joint, which involves cutting a tenon on one member that fits into a corresponding mortise cut into the other member. Other joints like the notched joint, tusk-tenon joint, and oblique shouldered joints are used when members meet at obtuse or acute angles.
This document discusses different types of wood joints used in furniture and woodworking. It describes various butt, edge, halving, housing, bridle, finger, mortise and tenon, dovetail, screw, plug, block, mitre, and dowel joints. Each joint type has different strengths and suitable applications. The document provides examples of describing suitable joints for joining furniture parts like table rails and legs or shelf units. It also includes a quiz to test the reader's knowledge of different joint names and parts.
This document discusses various topics related to woodworking and carpentry. It defines key terms like board foot, which is a unit used to measure lumber. It also lists common woodworking tools categorized into testing tools, marking tools, holding tools, cutting tools, smooth facing tools, boring tools, and fastening tools. Additionally, it explains different types of wood joints like mortise joints, tenon joints, and dovetail joints which involve fitting pieces of wood together.
Holding a bachelor’s degree in chemical engineering and an MBA from the University of California, Davis, Craig William Taylor currently serves as a group leader and senior engineer for Genentech, Inc. When he’s not busy with work, Craig William Taylor enjoys a variety of hobbies, including woodworking.
Health Benefits of Gardens in Hospitals
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children =
http://scribd.com/doc/239851214 ~
`
Double Food Production from your School Garden with Organic Tech =
http://scribd.com/doc/239851079 ~
`
Free School Gardening Art Posters =
http://scribd.com/doc/239851159 ~
`
Increase Food Production with Companion Planting in your School Garden =
http://scribd.com/doc/239851159 ~
`
Healthy Foods Dramatically Improves Student Academic Success =
http://scribd.com/doc/239851348 ~
`
City Chickens for your Organic School Garden =
http://scribd.com/doc/239850440 ~
`
Simple Square Foot Gardening for Schools - Teacher Guide =
http://scribd.com/doc/239851110 ~
This document discusses defining projects and improving project definition processes. It proposes that projects should be carefully planned to achieve business goals and benefits, not just delivery. It presents a framework for understanding the project definition lifecycle and identifies questions around typical reactive approaches. The document concludes that formulating projects based on clear rationale and realistic assumptions is important, and evolving processes and culture can help drive improvements like maintaining a strategic roadmap and fully understanding project context.
This document discusses different types of wood joints used in carpentry and woodworking. It provides information on various carcase joints like butt joints, rebate and butt joints, mitre joints, and dovetail joints. It also discusses housing joints, framing joints, mortise and tenon joints, widening joints, biscuit joints, and knock down fittings. The document includes diagrams to illustrate the different joints and their applications.
The document discusses the physical components of open spaces, including walls, floors, roofs, and furniture. It describes walls as defining the shape and size of a space and directing movement. Floors can be flat, multi-level, or made of different materials depending on the space's use. Roofs are usually the sky but may be covered. Furniture includes hardscape elements like lighting, signs, sculptures, and fountains as well as softscape elements like trees and plants, which provide shade, act as landmarks, and direct movement and vision.
Blue Thumb is a Michigan-based company that manufactures and distributes water feature equipment and supplies. It was founded in 2000 and has since expanded from a 3,200 square foot space to over 50,000 square feet. The presentation discusses the history of water features from ancient times to modern day and how their design has evolved. It also provides an overview of different types of water features including koi ponds, water gardens, fountains, and wetlands. The role of plants and other natural elements in successful water feature design is emphasized.
The document discusses different types of doors and windows. It describes doors in terms of their components, sizes, frames, types and materials. The main types of doors covered are paneled doors, glazed doors, flush doors, louvered doors, revolving doors, sliding doors, swing doors and collapsible doors. It also discusses different types of windows like fixed windows. Rolling shutters are described as curtain-like doors made of thin steel sheets used for shops and warehouses. The document provides detailed information on specifications and uses of different door and window components.
This document discusses various wall finishes and patterns. It describes different types of finishes like cement textured, plastered, wood panels, and plywood that can be used on walls. It also discusses plaster finishes like plaster of Paris and gypsum plaster. Other finishes mentioned include laminate, marble powder, wallpapers, fabrics, and cork. The document also covers decorative paint techniques like transparent layers, trompe l'oeil, stenciling, and distressing. Finally, it summarizes mosaics, murals, graffiti style murals, and tile murals as wall covering options.
This document discusses various types of acoustical materials used to control sound, including sound absorbers, diffusers, barriers, and reflectors. It provides details on common sound absorbing materials like acoustical foam panels, fabric-wrapped panels, wall coverings, ceiling tiles, and baffles. These materials use porous materials like foam, fiberglass, and fabrics to absorb sound waves. The document also briefly mentions sound diffusers which scatter sound reflections instead of absorbing them.
The document discusses various aspects of project management. It begins by outlining the different stages of a project including planning and scheduling, data collection, status updates, and ensuring successful completion. It then defines what a project is, its key characteristics, and how project management applies knowledge and techniques to meet stakeholder needs and expectations. The document also discusses why companies and individuals use project management and what goes into a project management plan. It provides overviews of the project management process, process groups, knowledge areas, and integration management.
Value based approach to heritae conservation -.docxJIT KUMAR GUPTA
Text defines the role, importance and relevance of value based approach in identification, preservation and conservation of heritage to make it more productive and community centric.
My Fashion PPT is my presentation on fashion and TrendssMedhaRana1
This Presentation is in one way a guide to master the classic trends and become a timeless beauty. This will help the beginners who are out with the motto to excel and become a Pro Fashionista, this Presentation will provide them with easy but really useful ten ways to master the art of styles. Hope This Helps.
RPWORLD offers custom injection molding service to help customers develop products ramping up from prototypeing to end-use production. We can deliver your on-demand parts in as fast as 7 days.