This document provides information about calibration services offered by CALTECH PRIVATE LIMITED. It defines calibration as operations required to ensure measuring equipment is in compliance for intended use. Calibration ensures accuracy, minimizes breakdowns, meets certification requirements, and improves quality. CALTECH offers pressure, temperature, humidity, and other calibration services, using calibrated quality instruments. Their lab follows ISO/IEC 17025 guidelines and technical team consists of experienced professionals committed to quality calibration.

1. TABLE OF SERVICE INSTRUMENTS
Parameter Instrument type
Maximum
Ranges
Pressure
Pressure gauges, Pressure switches, Pressure trans-
mitter, Differential Pressure transmitter Inclined
Manometer & Magnehelic Gauges, Vacuum gauges
(-1) to 400 Bar
Temperature
Digital & Analogue Temperature Indicators and
Controllers, Dial type temperature gauges, Glass
Thermometers, Wet and Dry Thermometers, Tem-
perature sensors, Temperature transmitters, Ther-
mostats, Digital Thermometers, Temperature Loop
Calibration
(-30) to 600˚C
Time Timers, Stop watch, Hour meters 0 to 24 hrs
RPM RPM indicators, Tachometers Up to 18000 RPM
Relative Humidity Wet and Dry bulb Hygrometer, Humidity Chambers 10 to 90% RH
pH pH meter, pH meter with sensor 0 to 14 pH
Conductivity
Conductivity meter, Conductivity transmitter,
Conductivity meter with sensor
Electrical Voltmeter, Ampere meter, Resistance meter.
Light LUX meters
Mechanical
Dial and Digital Vernier Caliper, Micrometers, Dial
gauges, Dial thickness gauges, Plunger dial gauges,
Height gauges, Measuring scale
Different accord-
ing to instruments
Balance Weighing Balance 1mg to 220 g
CALTECH PRIVATE LIMITED
360/50, Manohara Ekta Marg, Kathmandu-35, Nepal
Contact No.: 9810243675, 9851181612
Email: info@caltechnepal.com
Web: www.caltechnepal.com
CALIBRATION FOR QUALITY ASSURANCE
CALTECH PRIVATE LIMITED
SERVICE INFORMATION

2. "You can’t make good products with bad machine”:- George Schuetz
What is Calibration??
Calibration is defined as "the set of operations required to ensure that an item of measur-
ing equipments is in the state of compliance with the requirements for its intended use.”
Why Calibrate??
Periodic use of instruments reduces accuracy of instruments, resulting error and ultimately
leading to wrong results. Therefore, the quality control instruments and process equip-
ments need to be calibrated time to time to ensure its proper functioning.
Benefits of calibration:
♦ Ensures accuracy of equipments: Calibration of equipments ensures the end user that
the accuracy and reliability of equipments are intact as specified .
♦ Minimizes breakdown: Regularly calibrated equipments have longer self -life than un-
calibrated equipments. It also minimizes the breakdown time of equipments in quality
control and production line, thus saves time and money.
♦ Meets Certification requirements: Calibration of measuring and test equipments (M
&TE) is must for various certification like ISO/HACCP, etc.
♦ Improvement in quality: Calibration of (M & TE) ultimately improves the quality of
products by reducing quality problem, scrap, fewer rejections and less rework.
♦ Safe working environment: Un-calibrated instruments may cause the breakdown of
important quality monitoring and production systems. It may increase the cost of run-
ning such machines and instruments. Regular calibration ensures safe working envi-
ronment.
ABOUT US:
CALTECH is founded by professionals working in the field of pharmaceuticals and me-
trology. We all understand the importance of calibration in quality control and process
equipments. In today’s competitive era, one cannot ignore the importance of quality. Suc-
cess of organizations depends upon good quality practices. Calibration is one such step
towards good quality practices. Here are major calibrations services offered by CAL-
TECH:
♦ Pressure Calibration
♦ Thermal calibration
♦ Humidity calibration
♦ Other calibration services( Mechanical calibration, RPM calibration, Electrical calibra-
tion, etc)
Pressure Calibration:
CALTECH provides calibration services for all types of pressure
instruments. We have a traceable standard ranging from (–1) to 400
bar. CALTECH is also capable for Magnehelic gauge calibration
ranging from (–200) mmWC to 200 mmWC.
Thermal Calibration:
This calibration service extends to different thermal instruments such
as Thermometer, Sensors, Digital Thermometer, Indicators, control-
lers, Temperature bath and many more. We are equipped with high
standard precision baths and comparison sensors for this purpose. We
provide thermal calibration range from (–30) to 600˚C.
Humidity Calibration:
This calibration extends to analog (wet and dry bulb) hygrometer and
Humidity chamber. We use comparison method for calibration. Our
standard equipment ranges form 10 to 90% RH.
Other Calibration Services:
Our other services include electrical instrument
calibration, timer calibration, pH/conductivity meter
calibration, ORP meter, etc . Different ranges are
provided for different instruments.
Why CALTECH??
CALTECH is committed for quality calibration services. Our lab is well equipped with
calibrated quality instruments. The master equipments include some of the world's best
brands like Yokogawa, Racer, Polltech, Rotronic, etc. CALTECH strictly follows the
guidelines suggested by ISO/IEC 17025. The technical team of CALTECH consists of
engineers, pharmaceutical technologists and experienced professionals in the field of me-
trology. Our standards are traceable to national and international standards. In a nutshell,
quality is our motto, vision and mission to promote the quality standards of our domestic
products acceptable to international market.
Our Services:
• Laboratory and On- site calibration
• Validation