CalibrationOrderScenario_ZPM5
•
0 likes•61 views
The document discusses calibration order scenarios in a quality management system including: 1. Creating a maintenance plan and assigning a general task list for calibration equipment. 2. Simulating calibration orders for future dates and generating inspection lots. 3. Releasing an order, recording results against inspection characteristics, and making a usage decision to confirm the order. 4. Entering failure results during result recording, selecting "Reject - Out of Tolerance" and confirming the order status as "Partially Confirmed".
Report
Share
Report
Share
Download to read offline
Recommended
Auto techo slno5
The document describes requirements for automating the closure of production orders. It involves validating that: 1) The production supervisor for an order matches that in the material master, 2) The order quantity equals goods issue and receipt quantities, and 3) The order falls within a specified production scheduler range. If validations pass, the order will be automatically closed. Otherwise, errors will be logged. The program will run both foreground and background.
PreventiveMaintenanceOrder_ZPM1
The document discusses simulating a preventive maintenance order by manually running a maintenance plan for future dates. It describes generating an order, releasing the order which commits materials, doing a goods issue, confirming the order operations which changes the status to partially confirmed, confirming the remaining operations changing the status to confirmed, and then technically completing the order.
SAP PM: Test Equipment Management/Calibration process
This document outlines the calibration process for test equipment in SAP PM, including:
1. Creating master inspection characteristics, equipment tasks lists, and maintenance plans for scheduling calibration work.
2. Generating calibration orders, carrying out tasks, and recording calibration results.
3. Making a usage decision based on the results to determine if equipment passes calibration or needs to be deactivated.
The process integrates test equipment management from the SAP Quality Management module with maintenance order processing in PM.
201124772 sap-pp-pi-process-flow-docs
This document provides an overview of the key transactions and processes used in process manufacturing in SAP. It describes the master data needed such as materials, resources, recipes, quality inspection characteristics, and quality plans. It then outlines the basic production cycle including creating a process order, goods issue, confirmation, goods receipt, quality approval, and stock release. Key transactions referenced include COR1, MIGO, CORK, QA32, and more. The production cycle explained focuses on production and quality management for a process manufacturing company.
PP-QM with Subcontractor
This document summarizes the steps in a production order that includes external processing and quality checks. It involves:
1) Creating a production order for a hexagon bolt with an external processing operation.
2) Generating a purchase requisition and purchase order for the external operation.
3) Receiving the goods from the external vendor.
4) Performing in-process and final inspections with quality management and updating the stock.
Production planningmisc
The document discusses production planning topics and provides an example of a typical production cycle in a process industry. It outlines the key steps in a production cycle as: 1) Creating a process order, 2) Releasing the process order for production, 3) Goods issue from stores, 4) Starting processing, 5) Confirming production output, 6) Goods receipt, 7) Quality approval and release, and 8) Stock appearing in unrestricted use for sale or further processing. The document then provides details on required masters, transactions, and an example scenario to demonstrate setting up and executing a production cycle.
SAP PM: Inspection Rounds & Operation Account Assignment
This document describes how to use inspection rounds and operation account assignment functionality in SAP PM. It provides instructions for defining an inspection round using a general task list, planning the inspection round by creating a maintenance plan and assigning the task list, and executing the inspection round by further planning any generated maintenance orders and recording time and costs at the operation level linked to different equipment references. Background prerequisites and configurations are also outlined.
Recurring inspection in QM
Recurring inspection means inspection of the material at regular intervals like every month, every year etc. The system can automatically create inspection lots at predefined intervals for selected batch materials. You can plan such inspections by having the system monitor the date for a recurring inspection. Recurring inspections are triggered by a report that you can execute manually or that the system can execute automatically (provided it has been planned as a background job). When recurring inspections are triggered automatically, the background job executes the report, which in turn selects the batches and creates the inspection lots according to your processing parameters. Recurring inspection process widely used in Process industries like Pharmaceutical, Chemical and Food industries
Recommended
Auto techo slno5
The document describes requirements for automating the closure of production orders. It involves validating that: 1) The production supervisor for an order matches that in the material master, 2) The order quantity equals goods issue and receipt quantities, and 3) The order falls within a specified production scheduler range. If validations pass, the order will be automatically closed. Otherwise, errors will be logged. The program will run both foreground and background.
PreventiveMaintenanceOrder_ZPM1
The document discusses simulating a preventive maintenance order by manually running a maintenance plan for future dates. It describes generating an order, releasing the order which commits materials, doing a goods issue, confirming the order operations which changes the status to partially confirmed, confirming the remaining operations changing the status to confirmed, and then technically completing the order.
SAP PM: Test Equipment Management/Calibration process
This document outlines the calibration process for test equipment in SAP PM, including:
1. Creating master inspection characteristics, equipment tasks lists, and maintenance plans for scheduling calibration work.
2. Generating calibration orders, carrying out tasks, and recording calibration results.
3. Making a usage decision based on the results to determine if equipment passes calibration or needs to be deactivated.
The process integrates test equipment management from the SAP Quality Management module with maintenance order processing in PM.
201124772 sap-pp-pi-process-flow-docs
This document provides an overview of the key transactions and processes used in process manufacturing in SAP. It describes the master data needed such as materials, resources, recipes, quality inspection characteristics, and quality plans. It then outlines the basic production cycle including creating a process order, goods issue, confirmation, goods receipt, quality approval, and stock release. Key transactions referenced include COR1, MIGO, CORK, QA32, and more. The production cycle explained focuses on production and quality management for a process manufacturing company.
PP-QM with Subcontractor
This document summarizes the steps in a production order that includes external processing and quality checks. It involves:
1) Creating a production order for a hexagon bolt with an external processing operation.
2) Generating a purchase requisition and purchase order for the external operation.
3) Receiving the goods from the external vendor.
4) Performing in-process and final inspections with quality management and updating the stock.
Production planningmisc
The document discusses production planning topics and provides an example of a typical production cycle in a process industry. It outlines the key steps in a production cycle as: 1) Creating a process order, 2) Releasing the process order for production, 3) Goods issue from stores, 4) Starting processing, 5) Confirming production output, 6) Goods receipt, 7) Quality approval and release, and 8) Stock appearing in unrestricted use for sale or further processing. The document then provides details on required masters, transactions, and an example scenario to demonstrate setting up and executing a production cycle.
SAP PM: Inspection Rounds & Operation Account Assignment
This document describes how to use inspection rounds and operation account assignment functionality in SAP PM. It provides instructions for defining an inspection round using a general task list, planning the inspection round by creating a maintenance plan and assigning the task list, and executing the inspection round by further planning any generated maintenance orders and recording time and costs at the operation level linked to different equipment references. Background prerequisites and configurations are also outlined.
Recurring inspection in QM
Recurring inspection means inspection of the material at regular intervals like every month, every year etc. The system can automatically create inspection lots at predefined intervals for selected batch materials. You can plan such inspections by having the system monitor the date for a recurring inspection. Recurring inspections are triggered by a report that you can execute manually or that the system can execute automatically (provided it has been planned as a background job). When recurring inspections are triggered automatically, the background job executes the report, which in turn selects the batches and creates the inspection lots according to your processing parameters. Recurring inspection process widely used in Process industries like Pharmaceutical, Chemical and Food industries
Resources-Training-Order-To-Cash- ETON Technologies.pdf
This document provides an overview and step-by-step demonstration of the order to cash (O2C) process in Oracle ERP. It describes the key stages of the O2C cycle including order entry, fulfillment, delivery, invoicing, payment, and cash application. It then demonstrates how Oracle supports different order fulfillment scenarios for a sample company. The presentation includes screenshots walking through entering a sales order, pick release, shipment confirmation, invoice creation, payment receipt, and journal transfer to the general ledger. It concludes with contact information for questions.
Sap sd configuration
1. The document describes various configuration settings related to tax determination, output determination, revenue account determination, credit management, route determination, availability check, and transfer of requirement in SAP.
2. It provides step-by-step instructions on configuring these areas using transaction codes and IMG paths.
3. Key areas covered include defining tax categories, regional codes, and tax rules; maintaining condition techniques for output determination; defining rules for revenue account and GL account assignment; and configuring credit control areas, risk categories, and credit checks.
Oracle AWR baseline - Basic
This document provides steps for configuring an AWR baseline using Oracle Enterprise Manager Cloud Control. It details how to:
1. Create a single AWR baseline by selecting a snapshot range and time period.
2. Compute baseline statistics and refresh until the status shows as completed.
3. Set the performance page to show the 99th percentile line using the new baseline.
4. Configure alert thresholds for the baseline by editing metric thresholds.
Embedded wm qm integration setup 1709 in s4-hana
This document provides step-by-step instructions for setting up quality inspection integration between Extended Warehouse Management (EWM) and Quality Management (QM) in SAP S/4HANA 1709. It includes 30 configuration steps in the Implementation Guide (IMG) and 5 transaction steps to demonstrate the inbound quality inspection process flow. The process shows how inspection lots are created during goods receipt, inspection tasks are generated, and stock is released once inspection is passed.
SAP PM - WCM: Enhanced Model - Entire process flow with SAP screenshots
SAP PM - WCM: Enhanced Model - Entire process flow with SAP screenshotsSubhrajyoti (Subhra) Bhattacharjee
This document outlines the process flow for work clearance management (WCM) using the enhanced model in SAP. Key steps include:
1) Creating a PM work order, then a work approval (WAP) linked to the order
2) Creating a work clearance application (WCA) and any other relevant applications (like for hot work) linked to the WAP
3) Creating an operational work clearance document (WCD) linked to the WCA
4) Performing tagging by switching the WCD status, then approving permits at the WAP and WCA levels
5) Releasing the PM order for execution once permits are approvedProductcostingsample
This document provides an overview and configuration steps for product cost planning in SAP, including:
1) Maintaining overhead cost elements for material and production overheads.
2) Defining calculation bases of materials and wages for overhead application.
3) Setting percentage overhead rates of 5% for materials and 4% for wages in plant 9100.
4) Configuring credit keys to credit overhead cost centers and debit products.
Production order - Murali krishna nookella
This document discusses how to technically complete a production order in SAP. It provides instructions on:
- Performing necessary checks before closing a production order by using transactions like CO03, COHV, and COOIS to monitor production order status.
- Understanding how technically completing a production order signals that production is finished and releases materials and capacity reservations.
- Reconciling confirmed and receipted quantities daily to accurately record production data in real-time.
- Analyzing production order variances by comparing target and actual quantities produced using transaction CO03 to identify errors and support continuous improvement.
On receiving customer complaint or return component for repair process
This document outlines the process for handling customer returns and repairs within an SAP system. It involves creating a notification for the returned item, generating a repair sales order, receiving the returned item through a return delivery, issuing a goods receipt, creating a service order from the repair order, adding operations and components to the service order, confirming the service order to issue components, and viewing the goods movement and accounting entries. The overall process manages the repair workflow from initial customer return to component issue for repair work.
Cin fi v1_by_guntupalliharikrishna
PAÍS VERSIÓN INDIA, PAYS VERSION INDE, 国家版印度
CIN Domain Basic concepts
FI consultant steps in CIN configuration
CIN VS Service Tax
CIN VS TDS
CIN MM Configuration Steps
CIN SD Configuration Steps
J1I9 CIN Number range objects
Master Data for CIN
MM CYCLES
DEPOT PLANTS
CIN TABLES
CIN Forms
CIN NOTES
CIN ACCOUNTING ENTRIES
UTILIZATION
CIN/VAT/TDS/SERVICE -TAX List of Reports
TAXINN VS TAXINJ
CAPITAL Procurement in SAP
SD CYCLES
Miscellaneous Topics
Mie Trak
MIE Trak ERP Software is a fully integrated business software solution. Modules include Quoting, Order Entry, Purchasing, Scheduling, Data Collection, Routing, Work Orders, Accounting, Quickbooks Integration, Inventory Control, BOM\'s, Invoicing, etc.
Manufacturing - User Manual v1
This user manual provides instructions for using the manufacturing functionality in Microsoft Dynamics NAV 2013 R2. It describes how to define bills of materials and routines, link them to items, create stockkeeping units for manufacturing, and generate firm planned and released production orders from sales orders or the planning worksheet. The production order process is also outlined, from obtaining materials, releasing the order, production order execution, and finishing the order.
ZTE BSS Operation Quick Guide_Rev4.pptx
This document provides instructions for various monitoring and configuration tasks in an EMS system for 2G, 3G, and 4G networks. It describes how to check alarms, monitor cell and board status, view and query KPIs, export and import configuration data using ICM, modify parameters, and more. The steps provided allow technicians to troubleshoot issues and configure elements like alarms, cells, boards, and neighbor relations across RNCs, BSCs and other network equipment.
Six Sigma Project = Internet Sample
The document discusses a project to reduce failures of heat sink mounted components by improving the heat sink assembly process. It aims to determine the highest risk component, identify correlations between field data and production data, set goals to reduce defects by 50%, and analyze the current process capability to identify non-capable processes in need of improvement.
Ap test script
This document provides a system test script for testing the payables process integration with the target application system. It includes 16 test sequences that cover key payables functions like opening payable periods, defining banks, invoice entry, payments, refunds, month-end processing and more. Each sequence includes the test step, expected results, and status. Century date compliance testing is also recommended. The document aims to ensure all customizations, interfaces and extensions are functioning correctly for the payables process.
GCC VAT - 40 days to go
This document discusses Triniti's approach to enabling GCC countries for VAT compliance effective January 1st, 2018. It provides an introduction to GCC VAT, outlines Oracle's landscape for VAT compliance, and describes Triniti's proprietary UI RnR automation tool to strategize and execute GCC VAT enablement projects in the shortest time possible through over 90% automation. The automation improves reliability and reduces project timelines by 60% compared to manual implementations.
2nd day System Configuration & Basic Functions Control Functions Design Tools...
The document describes the configuration and functions of an industrial automation system, including temperature control loops, interlocks, and programmed temperature controls. It also discusses the system's display design tools and report design functions. Specifically, it details how the system uses two controllers in a cascaded configuration to control the temperature of a reaction vessel. It outlines the temperature interlock process that occurs if an abnormal temperature is detected. Finally, it provides the temperature pattern and phases for programmed temperature control of a heat treatment system, including preheating, heating, reaction, agitation, and cooling phases.
SAP-CO-PC - Product Cost Cycle
SAP-CO-PC - Product Cost Cycle:
100% Pass Guarantee Program of Any SAP Certification.100% positive results.
My email id: udaysap@yahoo.com; Skype id: opelley; contact number: 281-660-6449.
Instrumentation ppt original.pptx
Nzugua Michael Evans presented on instrumentation equipment management. He discussed key aspects including calibration, validation, maintenance and inventory. Calibration ensures accuracy and reliability by comparing equipment readings to known standards, and should be done annually. Validation verifies equipment will consistently meet specifications. Maintenance such as cleaning and repairs helps equipment last longer and work properly. A well-organized maintenance program provides reliable results, fewer interruptions and safety. Documentation like logs and inventories are important for tracking equipment status and history.
Equipment validation of tablet compression ( machine)
1) The document outlines the validation process for a tablet compression machine, including installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ).
2) The IQ establishes that the machine is installed correctly according to specifications. The OQ tests that the machine operates as intended at different speeds and settings.
3) The PQ evaluates the machine's compression capabilities by producing tablets and testing for characteristics like content uniformity, thickness, hardness, and friability. The validation protocol brings all stages together in a report.
exp 15.docx
The experiment aims to design and test a daily production record system using a PLC. A sensor counts empty boxes on a conveyor and sends the count to the PLC. The PLC increments a counter and tracks the number of boxes against two batch targets of 10 and 20 boxes. When a batch is complete, an output turns on an indicator light. The counter can be reset after 24 hours to start a new daily record. The PLC logic uses contacts, counters, and comparators to track box counts and control output lights to monitor batch progress and completion.
More Related Content
Similar to CalibrationOrderScenario_ZPM5
Resources-Training-Order-To-Cash- ETON Technologies.pdf
This document provides an overview and step-by-step demonstration of the order to cash (O2C) process in Oracle ERP. It describes the key stages of the O2C cycle including order entry, fulfillment, delivery, invoicing, payment, and cash application. It then demonstrates how Oracle supports different order fulfillment scenarios for a sample company. The presentation includes screenshots walking through entering a sales order, pick release, shipment confirmation, invoice creation, payment receipt, and journal transfer to the general ledger. It concludes with contact information for questions.
Sap sd configuration
1. The document describes various configuration settings related to tax determination, output determination, revenue account determination, credit management, route determination, availability check, and transfer of requirement in SAP.
2. It provides step-by-step instructions on configuring these areas using transaction codes and IMG paths.
3. Key areas covered include defining tax categories, regional codes, and tax rules; maintaining condition techniques for output determination; defining rules for revenue account and GL account assignment; and configuring credit control areas, risk categories, and credit checks.
Oracle AWR baseline - Basic
This document provides steps for configuring an AWR baseline using Oracle Enterprise Manager Cloud Control. It details how to:
1. Create a single AWR baseline by selecting a snapshot range and time period.
2. Compute baseline statistics and refresh until the status shows as completed.
3. Set the performance page to show the 99th percentile line using the new baseline.
4. Configure alert thresholds for the baseline by editing metric thresholds.
Embedded wm qm integration setup 1709 in s4-hana
This document provides step-by-step instructions for setting up quality inspection integration between Extended Warehouse Management (EWM) and Quality Management (QM) in SAP S/4HANA 1709. It includes 30 configuration steps in the Implementation Guide (IMG) and 5 transaction steps to demonstrate the inbound quality inspection process flow. The process shows how inspection lots are created during goods receipt, inspection tasks are generated, and stock is released once inspection is passed.
SAP PM - WCM: Enhanced Model - Entire process flow with SAP screenshots
SAP PM - WCM: Enhanced Model - Entire process flow with SAP screenshotsSubhrajyoti (Subhra) Bhattacharjee
This document outlines the process flow for work clearance management (WCM) using the enhanced model in SAP. Key steps include:
1) Creating a PM work order, then a work approval (WAP) linked to the order
2) Creating a work clearance application (WCA) and any other relevant applications (like for hot work) linked to the WAP
3) Creating an operational work clearance document (WCD) linked to the WCA
4) Performing tagging by switching the WCD status, then approving permits at the WAP and WCA levels
5) Releasing the PM order for execution once permits are approvedProductcostingsample
This document provides an overview and configuration steps for product cost planning in SAP, including:
1) Maintaining overhead cost elements for material and production overheads.
2) Defining calculation bases of materials and wages for overhead application.
3) Setting percentage overhead rates of 5% for materials and 4% for wages in plant 9100.
4) Configuring credit keys to credit overhead cost centers and debit products.
Production order - Murali krishna nookella
This document discusses how to technically complete a production order in SAP. It provides instructions on:
- Performing necessary checks before closing a production order by using transactions like CO03, COHV, and COOIS to monitor production order status.
- Understanding how technically completing a production order signals that production is finished and releases materials and capacity reservations.
- Reconciling confirmed and receipted quantities daily to accurately record production data in real-time.
- Analyzing production order variances by comparing target and actual quantities produced using transaction CO03 to identify errors and support continuous improvement.
On receiving customer complaint or return component for repair process
This document outlines the process for handling customer returns and repairs within an SAP system. It involves creating a notification for the returned item, generating a repair sales order, receiving the returned item through a return delivery, issuing a goods receipt, creating a service order from the repair order, adding operations and components to the service order, confirming the service order to issue components, and viewing the goods movement and accounting entries. The overall process manages the repair workflow from initial customer return to component issue for repair work.
Cin fi v1_by_guntupalliharikrishna
PAÍS VERSIÓN INDIA, PAYS VERSION INDE, 国家版印度
CIN Domain Basic concepts
FI consultant steps in CIN configuration
CIN VS Service Tax
CIN VS TDS
CIN MM Configuration Steps
CIN SD Configuration Steps
J1I9 CIN Number range objects
Master Data for CIN
MM CYCLES
DEPOT PLANTS
CIN TABLES
CIN Forms
CIN NOTES
CIN ACCOUNTING ENTRIES
UTILIZATION
CIN/VAT/TDS/SERVICE -TAX List of Reports
TAXINN VS TAXINJ
CAPITAL Procurement in SAP
SD CYCLES
Miscellaneous Topics
Mie Trak
MIE Trak ERP Software is a fully integrated business software solution. Modules include Quoting, Order Entry, Purchasing, Scheduling, Data Collection, Routing, Work Orders, Accounting, Quickbooks Integration, Inventory Control, BOM\'s, Invoicing, etc.
Manufacturing - User Manual v1
This user manual provides instructions for using the manufacturing functionality in Microsoft Dynamics NAV 2013 R2. It describes how to define bills of materials and routines, link them to items, create stockkeeping units for manufacturing, and generate firm planned and released production orders from sales orders or the planning worksheet. The production order process is also outlined, from obtaining materials, releasing the order, production order execution, and finishing the order.
ZTE BSS Operation Quick Guide_Rev4.pptx
This document provides instructions for various monitoring and configuration tasks in an EMS system for 2G, 3G, and 4G networks. It describes how to check alarms, monitor cell and board status, view and query KPIs, export and import configuration data using ICM, modify parameters, and more. The steps provided allow technicians to troubleshoot issues and configure elements like alarms, cells, boards, and neighbor relations across RNCs, BSCs and other network equipment.
Six Sigma Project = Internet Sample
The document discusses a project to reduce failures of heat sink mounted components by improving the heat sink assembly process. It aims to determine the highest risk component, identify correlations between field data and production data, set goals to reduce defects by 50%, and analyze the current process capability to identify non-capable processes in need of improvement.
Ap test script
This document provides a system test script for testing the payables process integration with the target application system. It includes 16 test sequences that cover key payables functions like opening payable periods, defining banks, invoice entry, payments, refunds, month-end processing and more. Each sequence includes the test step, expected results, and status. Century date compliance testing is also recommended. The document aims to ensure all customizations, interfaces and extensions are functioning correctly for the payables process.
GCC VAT - 40 days to go
This document discusses Triniti's approach to enabling GCC countries for VAT compliance effective January 1st, 2018. It provides an introduction to GCC VAT, outlines Oracle's landscape for VAT compliance, and describes Triniti's proprietary UI RnR automation tool to strategize and execute GCC VAT enablement projects in the shortest time possible through over 90% automation. The automation improves reliability and reduces project timelines by 60% compared to manual implementations.
2nd day System Configuration & Basic Functions Control Functions Design Tools...
The document describes the configuration and functions of an industrial automation system, including temperature control loops, interlocks, and programmed temperature controls. It also discusses the system's display design tools and report design functions. Specifically, it details how the system uses two controllers in a cascaded configuration to control the temperature of a reaction vessel. It outlines the temperature interlock process that occurs if an abnormal temperature is detected. Finally, it provides the temperature pattern and phases for programmed temperature control of a heat treatment system, including preheating, heating, reaction, agitation, and cooling phases.
SAP-CO-PC - Product Cost Cycle
SAP-CO-PC - Product Cost Cycle:
100% Pass Guarantee Program of Any SAP Certification.100% positive results.
My email id: udaysap@yahoo.com; Skype id: opelley; contact number: 281-660-6449.
Instrumentation ppt original.pptx
Nzugua Michael Evans presented on instrumentation equipment management. He discussed key aspects including calibration, validation, maintenance and inventory. Calibration ensures accuracy and reliability by comparing equipment readings to known standards, and should be done annually. Validation verifies equipment will consistently meet specifications. Maintenance such as cleaning and repairs helps equipment last longer and work properly. A well-organized maintenance program provides reliable results, fewer interruptions and safety. Documentation like logs and inventories are important for tracking equipment status and history.
Equipment validation of tablet compression ( machine)
1) The document outlines the validation process for a tablet compression machine, including installation qualification (IQ), operational qualification (OQ), and performance qualification (PQ).
2) The IQ establishes that the machine is installed correctly according to specifications. The OQ tests that the machine operates as intended at different speeds and settings.
3) The PQ evaluates the machine's compression capabilities by producing tablets and testing for characteristics like content uniformity, thickness, hardness, and friability. The validation protocol brings all stages together in a report.
exp 15.docx
The experiment aims to design and test a daily production record system using a PLC. A sensor counts empty boxes on a conveyor and sends the count to the PLC. The PLC increments a counter and tracks the number of boxes against two batch targets of 10 and 20 boxes. When a batch is complete, an output turns on an indicator light. The counter can be reset after 24 hours to start a new daily record. The PLC logic uses contacts, counters, and comparators to track box counts and control output lights to monitor batch progress and completion.
Similar to CalibrationOrderScenario_ZPM5 (20)
Resources-Training-Order-To-Cash- ETON Technologies.pdf
Resources-Training-Order-To-Cash- ETON Technologies.pdf
SAP PM - WCM: Enhanced Model - Entire process flow with SAP screenshots
SAP PM - WCM: Enhanced Model - Entire process flow with SAP screenshots
On receiving customer complaint or return component for repair process
On receiving customer complaint or return component for repair process
2nd day System Configuration & Basic Functions Control Functions Design Tools...
2nd day System Configuration & Basic Functions Control Functions Design Tools...
Equipment validation of tablet compression ( machine)
Equipment validation of tablet compression ( machine)
CalibrationOrderScenario_ZPM5
- 1. Calibration Order Scenario: PM – QM Integration Calibration Equipment
- 3. QM Data –Inspection points setup in theHeader as shown above
- 4. MIC assigned for the Operation as displayed. Now create aMaintenance plan – For the Calibration Equipment (IP01)
- 5. Assign theGeneral task list for the Plan (We canalso Equipment task lists as well)
- 6. Scheduling overview: (IP24) Now lets simulate Calibration orders for future dates for running IP30.
- 7. As I ran the simulation for 400 days – I had got the above order generated. Lets view the scheduling overview…IP24
- 8. See orders generatedtill March 2018. Lets releasethe order and do next steps. IW32
- 9. Order is in createdstatus and I see no inspection lot generated. Releasethe order now.. Save.
- 10. Open theorder again. An inspection lot should be generated. (PM-QMIntegration) Lets view the inspection lot…
- 11. Inspection lot got generatedfor the order against theEquipment. Now We need to do Result Recording and Usage Decision against the Inspection lot. PM – QM Integration: There areways to do theRR & UD: QE51N
- 12. Result Recording… Enter your results against each MIC
- 15. We see the lot status as Results confirmed. Now lets do the UD:
- 16. Click Save
- 17. Click OK Prompts to Order confirmation screen.
- 18. Enter work hours and save. Lets go theorder and see thestatus.
- 19. Order got CNF Confirmed. See the Inspection Lot status:
- 20. RR & UD has been made.
- 21. CASE II : NegativeScenario Test (when my results areout of limits) Lets takeorder with inspection lot – 140000000356 Lets do RR & UD
- 23. I had recorded failure results here. As we see above
- 24. Am selecting – Reject – Out of Tolerance No do the UD
- 27. Save the order. If you wanna rework on theOrder – As wesee PCNF. We can add an another step to install an new Equipment in our operation
- 30. Now you can TECO this order. Note: (order would not be copiedto Inspectionlot as we the results have failed)