Cable Rollers - Triple Corner Cable Rollers - Cable Roller Ref SEB CR4
•
0 likes•1,901 views
The document describes several types of cable rollers used for laying cables in trenches. The TRP76 is a narrow roller for cables up to 76mm diameter. The HSP125 and HBSP125 are heavy duty rollers for cables up to 125mm, with the HBSP125 able to be placed over existing cables. Corner rollers include the CR1 angle roller for heavy cables around corners, the CR2 skid roller for corner work, and the CR4 triple corner roller for difficult corners using three rollers. All provide details of material, size, and weight.
Report
Share
Report
Share
Download to read offline
Recommended
Cable Rollers - Suspension Cable Rollers - Cable Roller Ref SEB SR5
This document provides specifications for various cable rollers and related equipment sold by Thorne & Derrick UK. It describes the following products:
- The CR5 roller with two horizontal rollers and a quick release gate for cables up to 125mm diameter.
- The CR6 roller with nine vertical steel rollers mounted in a heavy duty steel frame for larger diameter cables.
- The SP1 skid plate that can be used as an alternative to the CR5/CR6 system.
- The DR1 draw off roller that leads cables from a drum into a trench.
- The VR1 roller assembly with a guide roller that centralizes cables from a drum into a trench.
Cable Rollers - Straight Cable Rollers For Underground Cable Trench
LV-HV power cables should be supported on straight cable rollers wich have no sharp edges which cause damage to cable sheathing under tension when being pulled into the cable trench.
The cable roller must be placed directly into the open cable trench to prevent the LV-HV power cable from dragging on the bottom of the trench. Cable roller spacing is dependent upon cable type and cable pulling tension along the route. Prior to the cable being laid onto the straight cable roller it is advised to use leading cable rollers to support the actual cable over the entire cable drum width.
Shaft couplings 3 rigid flange coupling
JNTUK
DMM-1
Shaft Couplings
Rigid Flange Coupling Design
Video Link: https://youtu.be/Hl58fuoArbE
Shaft couplings 2 split muff
This document discusses split muff couplings, which are clamp or compression couplings used to join two shafts together. Split muff couplings have multiples of 4 bolts and allow for easy assembly and disassembly without needing to move the shafts. However, they are difficult to dynamically balance and unsuitable for shock loads. The document provides an example problem to design a split muff coupling to transmit 50 kW of power at 120 rpm between shafts made of plain carbon steel. The steps include calculating shaft diameters, specifying sleeve dimensions, finding bolt diameters based on power transmission via friction, using standard relations for bolt diameter specification, and checking key dimensions for shear and compression criteria.
Coupling and flange coupling and its design
This document describes a rigid flange coupling used to connect two shafts for transmitting power. A flange coupling consists of two cast iron flanges mounted and keyed on the ends of each shaft and bolted together. The design process involves calculating the shaft diameter based on the torque to be transmitted. Then selecting a coupling based on the shaft diameter. Checks are performed to ensure the bolt shear strength and bearing strength are sufficient based on allowable stresses. Dimensions of the selected coupling are drawn along with verification that the actual torque is less than the allowable torque for safe design.
Shaft couplings1
JNTUK
2-2 semester
DMM-1
5.SHAFT COUPLINGS
MUFF COUPLING
VIDEO LINK: https://www.youtube.com/cards?v=SB3bTGaT5vo&nrts=1&nv=1
Manufacturing processes of rigid coupling
This document summarizes the manufacturing processes for components of a flange coupling. It describes the main components as flanges, shafts, nuts and bolts, and keys. For flanges, the processes include cutting, heating, forging and rolling, drilling, and surface finishing. Shafts are made through extrusion or rolling processes. Nuts and bolts are made through processes like cutting, drilling, upset forming, and surface cutting. Keys are manufactured using processes such as surface cutting, milling, filing, and surface finishing.
2021 STORAGE RACKS SYSTEM | AARDWOLF INDUSTRIES LLC
2021 STORAGE RACKS SYSTEM | AARDWOLF INDUSTRIES LLC
MORE PRODUCT INFORMATION
https://www.aardwolf.com.au/index.php?c=138&li=1
Recommended
Cable Rollers - Suspension Cable Rollers - Cable Roller Ref SEB SR5
This document provides specifications for various cable rollers and related equipment sold by Thorne & Derrick UK. It describes the following products:
- The CR5 roller with two horizontal rollers and a quick release gate for cables up to 125mm diameter.
- The CR6 roller with nine vertical steel rollers mounted in a heavy duty steel frame for larger diameter cables.
- The SP1 skid plate that can be used as an alternative to the CR5/CR6 system.
- The DR1 draw off roller that leads cables from a drum into a trench.
- The VR1 roller assembly with a guide roller that centralizes cables from a drum into a trench.
Cable Rollers - Straight Cable Rollers For Underground Cable Trench
LV-HV power cables should be supported on straight cable rollers wich have no sharp edges which cause damage to cable sheathing under tension when being pulled into the cable trench.
The cable roller must be placed directly into the open cable trench to prevent the LV-HV power cable from dragging on the bottom of the trench. Cable roller spacing is dependent upon cable type and cable pulling tension along the route. Prior to the cable being laid onto the straight cable roller it is advised to use leading cable rollers to support the actual cable over the entire cable drum width.
Shaft couplings 3 rigid flange coupling
JNTUK
DMM-1
Shaft Couplings
Rigid Flange Coupling Design
Video Link: https://youtu.be/Hl58fuoArbE
Shaft couplings 2 split muff
This document discusses split muff couplings, which are clamp or compression couplings used to join two shafts together. Split muff couplings have multiples of 4 bolts and allow for easy assembly and disassembly without needing to move the shafts. However, they are difficult to dynamically balance and unsuitable for shock loads. The document provides an example problem to design a split muff coupling to transmit 50 kW of power at 120 rpm between shafts made of plain carbon steel. The steps include calculating shaft diameters, specifying sleeve dimensions, finding bolt diameters based on power transmission via friction, using standard relations for bolt diameter specification, and checking key dimensions for shear and compression criteria.
Coupling and flange coupling and its design
This document describes a rigid flange coupling used to connect two shafts for transmitting power. A flange coupling consists of two cast iron flanges mounted and keyed on the ends of each shaft and bolted together. The design process involves calculating the shaft diameter based on the torque to be transmitted. Then selecting a coupling based on the shaft diameter. Checks are performed to ensure the bolt shear strength and bearing strength are sufficient based on allowable stresses. Dimensions of the selected coupling are drawn along with verification that the actual torque is less than the allowable torque for safe design.
Shaft couplings1
JNTUK
2-2 semester
DMM-1
5.SHAFT COUPLINGS
MUFF COUPLING
VIDEO LINK: https://www.youtube.com/cards?v=SB3bTGaT5vo&nrts=1&nv=1
Manufacturing processes of rigid coupling
This document summarizes the manufacturing processes for components of a flange coupling. It describes the main components as flanges, shafts, nuts and bolts, and keys. For flanges, the processes include cutting, heating, forging and rolling, drilling, and surface finishing. Shafts are made through extrusion or rolling processes. Nuts and bolts are made through processes like cutting, drilling, upset forming, and surface cutting. Keys are manufactured using processes such as surface cutting, milling, filing, and surface finishing.
2021 STORAGE RACKS SYSTEM | AARDWOLF INDUSTRIES LLC
2021 STORAGE RACKS SYSTEM | AARDWOLF INDUSTRIES LLC
MORE PRODUCT INFORMATION
https://www.aardwolf.com.au/index.php?c=138&li=1
SEB Hydraulic Cable Drum Lifting Jacks - SEB Cable Pulling & Laying Equipment
SEB Hydraulic Cable Drum Lifting Jacks - SEB Cable Pulling & Laying EquipmentThorne & Derrick International
This document provides information on various jacks, spindles, and accessories for lifting cable drums. It includes:
1) Hydraulic drum jacks that are lightweight, versatile, stable, and can be easily moved by one person for lifting a vast range of cable drums.
2) A range of cable drum jacks that are easy to handle and operate with a base plate designed for stability on soft ground.
3) Jack plinths that provide an additional 300mm of safe lifting height as cable drums are increasingly larger but not necessarily heavier.Lifting magnets in a variety of types
Different types of lifting magnets have diverse capacity – ranging from 330 lbs to 4400 lbs and sometimes more.For more information visit: https://www.armsmag.com/lifting-magnets.htm
2021 LIFTING CLAMP | AARDWOLF INDUSTRIES LLC
This document is a catalogue for 2021 that lists various lifting clamps and equipment. It includes slab lifters, barrier lifters, horizontal stone lifting clamps, pipe lifters, brick grabs lifters, rock lifters, drum lifters, billet lifters, stone panel carriers, monument clamps/lifters, and carry clamps for sheet material. For each product, it provides the grip range in millimeters and inches, the product code, working load limit, and net weight. It also includes brief descriptions of some of the products.
Thomson bsa sn_specsheet
This document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, customization options, variety of lead sizes and diameters, corrosion resistance, lubrication methods, load capacity, temperature limits, length limitations, and material properties. Precision lead screws are presented as an economical solution for linear motion. SupernutTM assemblies are available in plastic or bronze nuts up to 4" diameters.
4B Forged Conveyor Chain Presentation
Forged chain can be used in many conveying appliactions, from drag conveying to en-masse conveying. Showing 4B's range of chain components, including, forged chain links, flights, sprockets, trailers and the new Bolt n Go assembly system.
Mechanical coupling
mechanical coupling,type of coupling,pump,fan,equipment,powerplant, ,type of couplings flexible coupling rigid coupling
C-clamp
The document is a report on the fabrication of a c-clamp submitted by engineering students at Cairo University. It describes the objective of making the c-clamp to learn manufacturing processes. It then details the processes used, including cutting the raw material to size, drilling a hole, and welding a nut. Dimensions of the finished part are provided. Photos show the different steps of rasping, drilling, and welding. Various welding processes are also defined.
Coupling by jawad ali
Shaft couplings are used to join shafts together end to end when transporting longer shafts. There are two main types of shaft couplings: rigid couplings which connect perfectly aligned shafts, and flexible couplings which connect shafts with misalignments. Rigid couplings include sleeve/muff couplings, clamp/split-muff couplings, and flange couplings. Flexible couplings include bushed pin couplings, universal couplings, and Oldham couplings. All couplings aim to transmit full power between shafts without losses while maintaining alignment and reducing shock.
Couplings by wishall patil
This document discusses different types of couplings used to join rotating shafts, including rigid couplings, flexible couplings, and muff couplings. It provides details on the construction and working of bush-pin flexible couplings and clamp couplings. Bush-pin flexible couplings can tolerate some misalignment of the shafts and absorb vibrations. Their design involves calculating the diameter of pins and bushes based on the torque transmitted and permissible stress values. Clamp couplings are easier to assemble and disassemble compared to rigid muff couplings, but are more difficult to balance at high speeds and unsuitable for shock loads.
W2 Standard Adjustable Crimping Tool
The W2 Standard Adjustable Crimping Tool, has virtually limitless application within the specified wire range of 12AWG (3.33mm2) through 26AWG (0.128mm2). Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression crimp, which is standard in the W2, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.
2021 A FRAME | AARDWOLF INDUSTRIES LLC
The document describes various transport and storage frames from Aardwolf, including:
1) A-frames of different sizes for transporting sheet materials like stone, glass, and engineered stone. The frames assemble quickly and can be moved manually or with forklifts.
2) Heavy-duty QP frames for delivering heavy glass and stone to construction sites. They can lift fully loaded frames.
3) Folding A-frames for hauling granite and marble securely. They fold up compactly for storage.
4) Demountable frames, bases, and top frames for flexible storage and transport of finished materials.
5) Storage A-frames of different sizes for safely storing large stone sl
Thomson bsa mts_integral_flange_specsheet
The document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, variety of sizes available, corrosion resistance, lubrication options, load capacity, temperature limits, and efficiency. Precision lead screws can be an economical solution for moderate to light load linear motion applications. Standard plastic nuts are available, as well as custom designs and bronze nut options for higher loads.
Acrow alu prop
Acrow Alu Prop provides aluminum shoring props and systems for construction sites. It has over 35 years of experience in formwork and scaffolding. The aluminum props are lightweight, easy to handle, and can be adjusted in height without pins by using threaded extensions and nuts. They have safety locks to prevent accidental sliding. The props come in 4 sizes and can be used individually, in prop table systems, or assembled into braced shoring towers using aluminum frames. Towers must follow rules for joint connections and spindle extensions to support allowable loads up to 60 kN per leg depending on height. Various components like heads, hangers, and drop heads are also available. Acrow has locations across the Middle East and North Africa
CADENAS-GRIP_LINK
The document summarizes Kinedyne's tire chain products and just-in-time delivery system. It provides details on their various tire chain models including the materials used, number of cross/side links, and packaging. It also outlines their simple 7-step process for installing the tire chains and includes contact information for ordering.
Easy Explained Shafts & Its Types by Hashim Hasnain
This document discusses different types of shafts used in machines to transmit power. It describes common materials used for shafts, including various carbon steels. The document outlines the different stresses that can act on shafts, such as shear from torque transmission and bending from forces. It also discusses how shafts are designed based on withstanding strength, rigidity, and various loading conditions like twisting, bending and combined moments. Finally, the document introduces different types of shaft couplings used to connect shafts, including rigid, flexible, and universal couplings.
B.tech admission in india
This document discusses design considerations for composite beams and columns. It covers general provisions, available strength calculations using plastic stress distribution and strain compatibility methods, design of encased composite columns, shear connector requirements, and effective width calculations. Key points include requirements for longitudinal and transverse reinforcement, minimum steel ratios, and calculations for available compressive strength, elastic buckling strength, and shear connector strength.
2021 FORKLIFT EQUIPMENT | AARDWOLF INDUSTRIES LLC
The document provides product specifications for various forklift boom attachments and accessories. It includes details on standard forklift booms, low profile forklift booms, pivot forklift booms, and double forklift booms with specifications like dimensions, weight limits, and load capacity charts. Additionally, it lists other attachments like extensions, transporters, shackles, and safety cages that can be used with the forklift booms. Load capacity charts are provided to show the maximum load limits at different positions for different forklift weight classes.
Soldadura de alambre tubular fcaw
This document discusses flux cored arc welding (FCAW), including its two classifications of self-shielded (FCAW-SS) and gas-shielded (FCAW-GS). It outlines the advantages and limitations of each, such as FCAW-SS working in open fields without gas needs but producing smoke and splashes, while FCAW-GS has less portability but better appearance and mechanical properties. The document also covers the main components of welding equipment used for FCAW, electrode classifications, the role of flux, and common applications of FCAW in structures, shipyards, piping, railways and more.
Universal Milling Machine Lm1450 series
The LM1450 series universal milling machines feature cast iron construction with precision and longevity. They have high strength milling heads with flexible movement and hardened three axis systems on rectangular guideways. The LM1450, LM1450A, and LM1450C models each offer increasing performance levels with features like powerful milling heads, internal gear grinding, mechanical feeds, international compliance, and rotary tables.
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...Thorne & Derrick International
SEB Cable Laying & Cable Pulling Equipment enables the installation of LV-HV power, fibre optic, telecoms, subsea cables and umbilicals into cable duct or cable trench.
T&D service utilities, power, construction, rail, mining, street lighting, subsea, offshore, oil, gas and petrochemical industries with global market leading SEB Cable Laying & Cable Pulling Equipment.
T&D distribute the complete range of SEB Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
SEB Cable Laying Solutions for Renewable Energy Projects
A comprehensive cable laying package includes cable rollers (straight and corner), cable drum jacks, cable winches and cable socks including stainless steel socks for pulling large diameter, high voltage subsea power cables and umbilicals up to 400kV.
Cable Rollers - Overhead Cable Rollers - Cable Roller Plumett - Overhead Line...
Cable Rollers - Overhead Cable Rollers - Cable Roller Plumett - Overhead Line...Thorne & Derrick International
CATU Insulating Ladders
Insulating ladders and accessories are designed for working on or near electrical installations up to 1000V AC or 1500V DC. They have several key safety features including high insulation between bars up to 10,000V, mechanical strength, and resistance to weather, corrosion and fire. A range of ladders, stepladders, cradles and other accessories are available with optional wheels or other accessories. Measurement tools like telescopic measuring sticks can also be used to measure conductor heights under tension.
More Related Content
What's hot
SEB Hydraulic Cable Drum Lifting Jacks - SEB Cable Pulling & Laying Equipment
SEB Hydraulic Cable Drum Lifting Jacks - SEB Cable Pulling & Laying EquipmentThorne & Derrick International
This document provides information on various jacks, spindles, and accessories for lifting cable drums. It includes:
1) Hydraulic drum jacks that are lightweight, versatile, stable, and can be easily moved by one person for lifting a vast range of cable drums.
2) A range of cable drum jacks that are easy to handle and operate with a base plate designed for stability on soft ground.
3) Jack plinths that provide an additional 300mm of safe lifting height as cable drums are increasingly larger but not necessarily heavier.Lifting magnets in a variety of types
Different types of lifting magnets have diverse capacity – ranging from 330 lbs to 4400 lbs and sometimes more.For more information visit: https://www.armsmag.com/lifting-magnets.htm
2021 LIFTING CLAMP | AARDWOLF INDUSTRIES LLC
This document is a catalogue for 2021 that lists various lifting clamps and equipment. It includes slab lifters, barrier lifters, horizontal stone lifting clamps, pipe lifters, brick grabs lifters, rock lifters, drum lifters, billet lifters, stone panel carriers, monument clamps/lifters, and carry clamps for sheet material. For each product, it provides the grip range in millimeters and inches, the product code, working load limit, and net weight. It also includes brief descriptions of some of the products.
Thomson bsa sn_specsheet
This document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, customization options, variety of lead sizes and diameters, corrosion resistance, lubrication methods, load capacity, temperature limits, length limitations, and material properties. Precision lead screws are presented as an economical solution for linear motion. SupernutTM assemblies are available in plastic or bronze nuts up to 4" diameters.
4B Forged Conveyor Chain Presentation
Forged chain can be used in many conveying appliactions, from drag conveying to en-masse conveying. Showing 4B's range of chain components, including, forged chain links, flights, sprockets, trailers and the new Bolt n Go assembly system.
Mechanical coupling
mechanical coupling,type of coupling,pump,fan,equipment,powerplant, ,type of couplings flexible coupling rigid coupling
C-clamp
The document is a report on the fabrication of a c-clamp submitted by engineering students at Cairo University. It describes the objective of making the c-clamp to learn manufacturing processes. It then details the processes used, including cutting the raw material to size, drilling a hole, and welding a nut. Dimensions of the finished part are provided. Photos show the different steps of rasping, drilling, and welding. Various welding processes are also defined.
Coupling by jawad ali
Shaft couplings are used to join shafts together end to end when transporting longer shafts. There are two main types of shaft couplings: rigid couplings which connect perfectly aligned shafts, and flexible couplings which connect shafts with misalignments. Rigid couplings include sleeve/muff couplings, clamp/split-muff couplings, and flange couplings. Flexible couplings include bushed pin couplings, universal couplings, and Oldham couplings. All couplings aim to transmit full power between shafts without losses while maintaining alignment and reducing shock.
Couplings by wishall patil
This document discusses different types of couplings used to join rotating shafts, including rigid couplings, flexible couplings, and muff couplings. It provides details on the construction and working of bush-pin flexible couplings and clamp couplings. Bush-pin flexible couplings can tolerate some misalignment of the shafts and absorb vibrations. Their design involves calculating the diameter of pins and bushes based on the torque transmitted and permissible stress values. Clamp couplings are easier to assemble and disassemble compared to rigid muff couplings, but are more difficult to balance at high speeds and unsuitable for shock loads.
W2 Standard Adjustable Crimping Tool
The W2 Standard Adjustable Crimping Tool, has virtually limitless application within the specified wire range of 12AWG (3.33mm2) through 26AWG (0.128mm2). Over a thousand turret heads are available to adapt the tool frame to your specific military or proprietary contact/wire combination. The 8 impression crimp, which is standard in the W2, assures absolute maximum tensile strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.
2021 A FRAME | AARDWOLF INDUSTRIES LLC
The document describes various transport and storage frames from Aardwolf, including:
1) A-frames of different sizes for transporting sheet materials like stone, glass, and engineered stone. The frames assemble quickly and can be moved manually or with forklifts.
2) Heavy-duty QP frames for delivering heavy glass and stone to construction sites. They can lift fully loaded frames.
3) Folding A-frames for hauling granite and marble securely. They fold up compactly for storage.
4) Demountable frames, bases, and top frames for flexible storage and transport of finished materials.
5) Storage A-frames of different sizes for safely storing large stone sl
Thomson bsa mts_integral_flange_specsheet
The document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, variety of sizes available, corrosion resistance, lubrication options, load capacity, temperature limits, and efficiency. Precision lead screws can be an economical solution for moderate to light load linear motion applications. Standard plastic nuts are available, as well as custom designs and bronze nut options for higher loads.
Acrow alu prop
Acrow Alu Prop provides aluminum shoring props and systems for construction sites. It has over 35 years of experience in formwork and scaffolding. The aluminum props are lightweight, easy to handle, and can be adjusted in height without pins by using threaded extensions and nuts. They have safety locks to prevent accidental sliding. The props come in 4 sizes and can be used individually, in prop table systems, or assembled into braced shoring towers using aluminum frames. Towers must follow rules for joint connections and spindle extensions to support allowable loads up to 60 kN per leg depending on height. Various components like heads, hangers, and drop heads are also available. Acrow has locations across the Middle East and North Africa
CADENAS-GRIP_LINK
The document summarizes Kinedyne's tire chain products and just-in-time delivery system. It provides details on their various tire chain models including the materials used, number of cross/side links, and packaging. It also outlines their simple 7-step process for installing the tire chains and includes contact information for ordering.
Easy Explained Shafts & Its Types by Hashim Hasnain
This document discusses different types of shafts used in machines to transmit power. It describes common materials used for shafts, including various carbon steels. The document outlines the different stresses that can act on shafts, such as shear from torque transmission and bending from forces. It also discusses how shafts are designed based on withstanding strength, rigidity, and various loading conditions like twisting, bending and combined moments. Finally, the document introduces different types of shaft couplings used to connect shafts, including rigid, flexible, and universal couplings.
B.tech admission in india
This document discusses design considerations for composite beams and columns. It covers general provisions, available strength calculations using plastic stress distribution and strain compatibility methods, design of encased composite columns, shear connector requirements, and effective width calculations. Key points include requirements for longitudinal and transverse reinforcement, minimum steel ratios, and calculations for available compressive strength, elastic buckling strength, and shear connector strength.
2021 FORKLIFT EQUIPMENT | AARDWOLF INDUSTRIES LLC
The document provides product specifications for various forklift boom attachments and accessories. It includes details on standard forklift booms, low profile forklift booms, pivot forklift booms, and double forklift booms with specifications like dimensions, weight limits, and load capacity charts. Additionally, it lists other attachments like extensions, transporters, shackles, and safety cages that can be used with the forklift booms. Load capacity charts are provided to show the maximum load limits at different positions for different forklift weight classes.
Soldadura de alambre tubular fcaw
This document discusses flux cored arc welding (FCAW), including its two classifications of self-shielded (FCAW-SS) and gas-shielded (FCAW-GS). It outlines the advantages and limitations of each, such as FCAW-SS working in open fields without gas needs but producing smoke and splashes, while FCAW-GS has less portability but better appearance and mechanical properties. The document also covers the main components of welding equipment used for FCAW, electrode classifications, the role of flux, and common applications of FCAW in structures, shipyards, piping, railways and more.
Universal Milling Machine Lm1450 series
The LM1450 series universal milling machines feature cast iron construction with precision and longevity. They have high strength milling heads with flexible movement and hardened three axis systems on rectangular guideways. The LM1450, LM1450A, and LM1450C models each offer increasing performance levels with features like powerful milling heads, internal gear grinding, mechanical feeds, international compliance, and rotary tables.
What's hot (19)
SEB Hydraulic Cable Drum Lifting Jacks - SEB Cable Pulling & Laying Equipment
SEB Hydraulic Cable Drum Lifting Jacks - SEB Cable Pulling & Laying Equipment
Easy Explained Shafts & Its Types by Hashim Hasnain
Easy Explained Shafts & Its Types by Hashim Hasnain
Viewers also liked
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...Thorne & Derrick International
SEB Cable Laying & Cable Pulling Equipment enables the installation of LV-HV power, fibre optic, telecoms, subsea cables and umbilicals into cable duct or cable trench.
T&D service utilities, power, construction, rail, mining, street lighting, subsea, offshore, oil, gas and petrochemical industries with global market leading SEB Cable Laying & Cable Pulling Equipment.
T&D distribute the complete range of SEB Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
SEB Cable Laying Solutions for Renewable Energy Projects
A comprehensive cable laying package includes cable rollers (straight and corner), cable drum jacks, cable winches and cable socks including stainless steel socks for pulling large diameter, high voltage subsea power cables and umbilicals up to 400kV.
Cable Rollers - Overhead Cable Rollers - Cable Roller Plumett - Overhead Line...
Cable Rollers - Overhead Cable Rollers - Cable Roller Plumett - Overhead Line...Thorne & Derrick International
CATU Insulating Ladders
Insulating ladders and accessories are designed for working on or near electrical installations up to 1000V AC or 1500V DC. They have several key safety features including high insulation between bars up to 10,000V, mechanical strength, and resistance to weather, corrosion and fire. A range of ladders, stepladders, cradles and other accessories are available with optional wheels or other accessories. Measurement tools like telescopic measuring sticks can also be used to measure conductor heights under tension.
CATU MO-182 ABS Helmet
This document provides information on various types of head protection equipment that meet certain safety standards, including helmets, face shields, and accessories. It lists specifications for ABS and polycarbonate safety helmets that provide protection from impacts and electric arcs. Face shields can be attached to helmets and provide UV protection, safety ratings, and references to standards. Adjustments, sizes, weights and dimensions are specified for the different helmet options.
CATU CG-10 LV Insulating Rubber Gloves
This document provides information on insulating rubber gloves and overgloves, including:
- Conversion tables listing insulating rubber glove and overglove references classified by voltage level from 0-36kV.
- Glove and overglove sizes ranging from 7-12.
- Insulating rubber gloves offer personal protection against electrical shocks and comply with ASTM standards.
- Gloves are made of rubber treated for high dielectric characteristics and individually tested.
CATU HV Insulating Gloves
This document provides information on insulating rubber gloves and overgloves, including:
- Conversion tables for insulating rubber gloves and overgloves that list reference classes, categories, voltages, and sizes.
- Insulating rubber gloves offer personal protection against electrical shocks and comply with ASTM standards.
- Gloves are made of rubber treated for high dielectric characteristics and are individually tested and sold packaged.
- Additional tables provide glove references related to class, type, voltage, size, and color.
Catu Electrical - Low & High Voltage Electrical Safety Equipment For Undergro...
Catu Electrical - Low & High Voltage Electrical Safety Equipment For Undergro...Thorne & Derrick International
CATU are world-market leaders in Electrical Safety Equipment for LV-HV Substation, Switchgear and Overhead Line projects and maintenance. T&D are CATU's largest UK distributor of Electrical Safety Equipment.
Catu insulating gloves provide high dielectric performance for LV-HV cable jointing, live-line, substation, overhead and underground cable installations - insulating gloves protect against electrical shock.
Catu Arc Flash Clothing & Protection Kits for working on LV-HV switchgear, cables and "racking-in and racking-out" of circuit breakers.
Catu Life Saving & Accident Intervention Kits are designed to make all necessary electrical safety equipment on-hand for rapid intervention and rescue up to 33kV.
Catu Kits include rescue stick, voltage detector, insulated cable cutting tool, insulating platform, rescue hook, insulating gloves and boots - mobile and wall-mounted substation kits.
Catu Short Circuiting & Earthing Kits suit overhead transmission and distribution lines, substation busbars, rail electrification, transformer and switchgear applications.
Short Circuiting and Portable Earthing Kits are available with a choice of earth clamps for both live and earth end in accordance with UK DNO, Network Rail and National Grid specifications - customised earthing kits to order.
Catu voltage detectors and phase comparators for voltage detection and integrity testing on LV-HV electricity transmission, distribution and overhead lines and cables.
Viewers also liked (7)
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
SEB - Cable Pulling & Cable Laying Equipment For Low & High Voltage Cables In...
Cable Rollers - Overhead Cable Rollers - Cable Roller Plumett - Overhead Line...
Cable Rollers - Overhead Cable Rollers - Cable Roller Plumett - Overhead Line...
Catu Electrical - Low & High Voltage Electrical Safety Equipment For Undergro...
Catu Electrical - Low & High Voltage Electrical Safety Equipment For Undergro...
Similar to Cable Rollers - Triple Corner Cable Rollers - Cable Roller Ref SEB CR4
Cable Rollers - Edge Cable Roller Swivelling - Cable Roller Ref SEB ERS76
Cable Rollers - Edge Cable Roller Swivelling - Cable Roller Ref SEB ERS76 Thorne & Derrick International
For protection of the rope on the rim and corner of the manhole. Unit swivels to the direction of the pull. Aluminium roller in zinc plated frame.
Height: 180mm Width: 200mm Length: 270mm Weight: 4.5Kgs
T&D UK distribute the complete range of Cable Pulling and Cable Laying Equipment for low and high voltage (LV-HV) power cable installations into underground trench or cable duct - this includes XLPE, PILC, EPR, waveform, service cables, triplex, 11kV, 33kV, EHV, fibre optic, telecoms and street lighting cables. We supply cable rollers, cable socks, cable jacks, drum trailers, cable pulling lubricant, underground cable protection (Stokbord & Tape Tile Cable Covers) and conduit duct rod - we service the utility cable laying contractor, electrical contractor and export markets.
SEB Cable Laying & Cable Pulling Equipment enables the installation of LV-HV power, fibre optic, telecoms, subsea cables and umbilicals into duct or trench.
Manhole Cable Rollers for Ducts - Cable Roller RR3
The document describes various types of cable rollers and guides used for ducts, including a ML5 Manhole Roller measuring 630mm by 290mm by 500mm and weighing 14kg. An ERS76 Edge Roller Swivels to guide cables and protect them on the rim and corner of manholes. Bellmouths are available in various sizes from 60mm to 250mm to fit the end of ducts and manholes to ease cable installation.
Structural Steel Work
This document provides an overview of structural steel work. It defines common sections used in steel construction like beams, angles, channels, tees, and their applications. It also discusses bolts, rivets, and welding as connection methods. The advantages of steel structures are listed as lightness, strength, ease of fabrication and erection. Disadvantages include susceptibility to corrosion and deformation due to small member sizes. The document compares steel frames to reinforced concrete and provides details on standard steel shapes, bars, angles, channels, tubes and their specifications.
Steel Work in Construction Works Civil Works Steel Works Notes PDF Free
Steel Work in Construction Works Civil Works Steel Works Notes PDF FreeBHADANI QUANTITY SURVEYING TRAINING INSTITUTE FOR CIVIL MECHANICAL AND ELECTRICAL ENGINEERS
This document provides an overview of structural steel shapes and their uses in construction. It defines common shapes like angles, channels, tees, and I-sections. Angles are used in steel roof trusses and floors. Channels are used as framing members and come in different standard sizes. T-sections form roof trusses and built-up beams. I-sections are commonly used as beams and columns to resist bending and shear. The document also discusses steel bars, tubes, and common connection methods like bolts, rivets, and welding.TYPES OF TRUSS | ARCHITECTURAL CONSTRUCTION
This document discusses different types of roof trusses and the materials used to construct them. It describes king post trusses, howe trusses, pratt trusses, and fink trusses. Common materials used include various grades of structural steel for the chords, king posts, and gussets. Higher strength steels of 450 MPa yield strength are being used more frequently. Disadvantages of steel include maintenance costs, fireproofing requirements, and susceptibility to fatigue and brittle fracture. Case studies of different truss types provide details on materials like angle sections and plate thicknesses used.
Caster mounting
This document describes different caster mounting applications and their load and steering characteristics. It lists 12 different configurations for mounting casters to floors, cross supports, frames, or tracks using bolted or welded swivel plates or stem casters. The configurations provide various combinations of rigid, swivel, and V-grooved casters suited for different load capacities, maneuverability needs, and distances required for steering over both short and long ranges.
Swivel base vice Production Manufacturing
The document discusses swivel base vices. It describes the components of a bench vise including the base, fixed jaw, movable jaw, and screw. It then focuses on swivel base vices, explaining that the base can rotate, allowing the workpiece to be positioned at different angles. The document discusses materials used like cast iron and steel. It also outlines the manufacturing process which typically involves casting, and sometimes forging, as well as machining operations after casting.
4B Drop Forged Conveyor Chain
4B's range of forged chain for all applications, including forged chain links, forged chain flights, sprockets, trailers, nylon flight sleeves, round link conveyor chain and the new Bolt n Go assembly system for forged and round link chains.
Training Report
This training report summarizes production, workshop, and quality control processes at an Egyptian steel factory. It discusses the steel grades used, reheating furnace operations, rolling processes across 22 stands to produce wire rod and rebar, workshop functions including CNC machining, and quality control procedures for inspecting billets and final coil products. Key points covered include maintaining billet temperature below 723°C for magnetic transport, 14 burners in the reheating furnace heating billets to 1230-1250°C, and inspecting billets for surface defects like pinholes, slag, and cracks that could affect the rolled product.
Report_2
This training report provides information on production, workshop operations, and quality control at an Egyptian steel plant. It discusses the steel grades used, reheating furnace operations, the multi-step rolling process, rolling technologies, products including wire rod and rebar, and workshop functions such as manufacturing spare parts and periodic maintenance. Key aspects of the rolling process like temperature controls, rolling speeds, tension control systems, and guide types are also summarized.
Steeel
This document discusses different types of steel based on carbon content and their uses in construction. It describes mild steel, medium carbon steel, and high carbon steel. Mild steel is soft and malleable, used for sheets. Medium carbon steel is very soft and ductile, used for wires. High carbon steel is very hard and brittle, used for tools. Steel is stronger than wrought iron or cast iron and suitable for all construction works. Common steel shapes used in construction include angles, channels, I-sections, T-sections, round bars, square bars, corrugated sheets, expanded metal, flat bars and plates. Reinforcing bars can be plain or ribbed-tor steel bars.
WINCHES BARS USA FOLLETO
This document describes and provides specifications for various types of winch bars and accessories used for securing loads on flatbed trucks. It includes combination winch bars, ratchet winch bars, standard winch bars, as well as accessories like the Kwik Winder and Strap Winder. Weights, lengths, and part numbers are provided for each item. Ratchet winch bars are highlighted as being a revolutionary development that allow winches to be used like ratchets for safer and more efficient operation.
IS 13920 1993 ductile detailing of RCC structures subjected to seismic force...
This document summarizes key aspects of IS 13920-1993, the Indian code of practice for ductile detailing of reinforced concrete structures subjected to seismic forces. It outlines performance criteria for moderate and large earthquakes. The code provides details for ductile reinforcement in beams, columns, joints, shear walls and other elements to enable structures to absorb energy during earthquakes and avoid sudden collapse. Figures illustrate recommended ductile detailing practices for longitudinal and transverse reinforcement in beams, columns, and other structural elements.
Rolling
Rolling is a metal forming process that reduces thickness or changes the cross-section of metal stock by compressive forces from rolls. There are two main types: flat rolling and shape rolling. Rolling can be done hot or cold depending on the temperature of the metal. Key rolling mill configurations include two-high, three-high, and four-high mills. Seamless pipes and tubes are formed through continuous processes without any welds, providing more reliable pressure retention than welded alternatives.
CATALOGUE - FAITH SCAFFOLDING PVT.LTD (3).pdf
We "Faith Services Private Limited" Had Started Our Journey Early In 2005. Since Then We Are Involved In Manufacturing And Exporting of Scaffolding Products, Steel Walkway Planks, Pre- Engineered Buildings (peb) and Portable Cabins. The Products We Offer Are Precision Engineered By The Experienced Professionals, Who Possess An Immense Knowledge and Experience In Their Respective Fields. Due to Robust Construction, Reliable Performance, Durability And Dimensional Accuracy With High Quality of Raw Material Our Products Are Appreciated In Both Domestic as Well as International Markets.
Faith Services Pvt. Ltd. Has Become a Name, Known In The Market For Scaffolding, Adjustable Telescopic Props, Ledger Scaffolding, Scaffolding Accessories & Related Access Products and Services. Our Company Has Successfully Served With India's top Contracting Firms With Commendable Access & Products, Whenever and Wherever They Required It. Over The Years, Our Company Has Designed, Made and Erected The Best Access & Solutions For Hundreds & Thousands of Satisfied Clients.
TUV SUD Indonesia - Home | Facebook
ISO 9001:2015 Quality Management System TUV SUD: To ensure customer satisfaction through out of contract with quality products & services on timely delivery along with performance & process capability to meet all your needs of project. “Meets all client expectations from our well Qualified, Experienced & Trained Team Supports”.
Three D Metals & Williams Metals
Three D Metals is a 160,000 square foot metal distributor located in Valley City, OH that stocks copper coil and bar, aluminum coil and bar, high carbon spring steel, low carbon steel, brass, and stainless steel. They have long-lasting partnerships with automotive, appliance, construction, and electrical industries. They offer fast turnaround, flexible minimums, and delivery across North America to reduce customers' inventory and space needs. Their products include high quality slit copper, cold rolled high carbon spring steel slit in oscillating coils, and copper and aluminum bus bar for transformers and switchgear.
WHIRLPOWER personal
The document describes various tools for working with pipes and hoses, including hose clamps, pipe wrenches, pliers, tube cutters, and gauges. Specifications are provided for each item, including materials, sizes available, and intended applications. A variety of brands and styles are listed to suit different piping needs.
FORCE, Herramienta Carroceria
This document provides product details for various auto body repair tools including hammers, dollies, dent pullers, pry bars, clamps, and pliers. It lists the contents, specifications, and weight for each item. The tools are designed for tasks like dismantling stubborn components, positioning parts, dent removal, and metal forming and are made of materials like steel to be durable.
Structural steel work
The document discusses structural steel used in construction. It describes the different types of steel based on carbon content and their properties. It also discusses reinforcement steel and structural steel sections used in construction. The main types of reinforcement steel discussed are mild steel, medium tensile steel, and high yield strength deformed bars. The main types of structural steel sections described include rolled sections like angles, channels, I-sections, tubes, plates, as well as built-up sections. Light gauge steel sections made from thin steel sheets are also summarized.
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & Umbilicals
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & UmbilicalsThorne & Derrick International
This document provides information about cablegrips manufactured by Slingco, including:
- Slingco offers various types of cablegrips (MU, A, S, D, L, O types) for quick and efficient cable installation and support.
- The cablegrips are made from high tensile galvanized or stainless steel wire rope or aramid and are precisely hand-woven to ensure high quality and reliability.
- Specifications are provided for each cablegrip type, including lattice dimensions, lengths, and approximate breaking strengths for different cable diameter ranges.Similar to Cable Rollers - Triple Corner Cable Rollers - Cable Roller Ref SEB CR4 (20)
Cable Rollers - Edge Cable Roller Swivelling - Cable Roller Ref SEB ERS76
Cable Rollers - Edge Cable Roller Swivelling - Cable Roller Ref SEB ERS76
Manhole Cable Rollers for Ducts - Cable Roller RR3
Manhole Cable Rollers for Ducts - Cable Roller RR3
Steel Work in Construction Works Civil Works Steel Works Notes PDF Free
Steel Work in Construction Works Civil Works Steel Works Notes PDF Free
IS 13920 1993 ductile detailing of RCC structures subjected to seismic force...
IS 13920 1993 ductile detailing of RCC structures subjected to seismic force...
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & Umbilicals
Cable Socks - Pulling & Supporting Subsea & Offshore Cables & Umbilicals
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Removing Uninteresting Bytes in Software Fuzzing
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Recently uploaded (20)
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Cable Rollers - Triple Corner Cable Rollers - Cable Roller Ref SEB CR4
- 1. CABLE ROLLERS - Trench Application Straight Line TRP76 Narrow Roller Designed for use in narrow trenches. Lightweight assembly suitable for cables up to 76mm dia. Zinc plated steel frame fitted with large waisted solid aluminium roller running on low friction sintered bushes. Base size: 320mm x 145mm. Weight: 2.75Kgs HSP125 ROLLER - HEAVY DUTY All Zinc plated heavy duty assembly suitable for cables up to 125mm dia. Steel frame fitted large waisted steel roller running on sealed ball bearings. Base size: 350mm x 230mm. Weight: 4Kgs HBSP125 BRIDGE ROLLER - HEAVY DUTY Generally as per the HSP125 Roller but with the added facility of being able to place same over a cable up to 90mm already laid in the trench. Base size: 350mm x 230mm. Weight: 4.5Kgs Corner Rollers CR1 ANGLE CORNER ROLLER Purpose designed for taking the heaviest cables round difficult corners and bends. Incorporates a vertical and horizontal roller 75mm diameter on low friction sintered bushes. Stake pins are provided to link rollers together into a continuous assembly on right angle bends. Paint finish. Height: 300mm Width: 160mm Length: 280mm Weight: 9.0Kgs CR2 SKID ROLLER Incorporates a horizontal steel roller 75mm dia running on low friction sintered bushes with back skid plate for corner work . Can be used singly or linked together with stake pins provided to form a continuous run. Paint finish. Height: 300mm Width: 230mm Length: 330mm Weight: 8.0Kgs CR4 TRIPLE CORNER ROLLER All zinc plated finish and using two vertical and one horizontal steel rollers identical to HSP125 for taking the heaviest cables round difficult corners. The assembly is of a robust contruction for use in the most arduous conditions and can be linked together with stake pins provided to form a continuous corner roller system. Height: 295mm Width: 290mm Length: 540mm Weight: 12Kgs WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK